Overview of Badger Meter's Flo-tech range of hydraulic turbine flow meters. Flo-tech products are used in hydraulic testing and analysis and on equipment in a variety of industries, including; agriculture, automotive, construction, forestry, marine and mining.
4. • Turbine flow sensors for hydraulic fluids.
• Multi-ported test stand meters with flow, pressure and
temperature sensors.
• Portable hydraulic testers for on-site diagnostics and
troubleshooting of hydraulic machinery.
• Flo-tech products are used in hydraulic testing and
analysis; and on equipment in a variety of industries,
including: agriculture, automotive, construction, forestry,
marine and mining
5. In-line hydraulic turbine flow sensors:
• Simultaneous flow, pressure and temperature
measurement
• Flow ranges up to 350 GPM (1,324 LPM)
• Operating pressures to 5,800 psig (400 barg)
• Operating temperatures to
300 °F (149 °C)
• Accuracy ±1% of full scale
6. Portable hydraulic testers:
• Simultaneous flow, pressure and temperature measurement
• Digital display of flow rate, temperature; dial pressure gauge
• Flow ranges up to 200 GPM (757 LPM)
• Operating pressures to 6,000 psig (414 barg)
• Operating temperatures to 300 °F (149 °C)
• Optional bi-directional function; optional power measurement in
HP or kW
• Accuracy ±1% of full scale
7. NEW: Internal burst disc
• Now standard on all Flo-tech
portable testers
• In event of over-pressurization,
no fluid will
escape outside the meter
• Safer for the operator
• More environmentally friendly
(no spills)
8. Basic System Installation
Test all system components - pump, motor, control valves, relief valves,
cylinders - with only minor plumbing changes
9. Bi-directional Motor Testing
Check motor efficiency and test the DCV (directional control valve)
with only minor plumbing changes
11. Hydrostatic Transmission Testing
Perform a pump performance test; and test the motor’s efficiency, without
removing the Flo-Check.
12. Flo-Check USB
Same Features as Testers, plus:
• USB-powered: one cable is all there is
• Adjustable High and Low alarms
• Safety disc valve bypass (7,500 PSI ΔP)
• Display values in real-time
• Record data to a file (.csv)
13. •Records maximum, average and minimum pressures, 10,000x per sec
•Captures and records system-damaging pressure spikes, up to 10,000 PSI
pressure spike
15. Quad Flow Sensor
Specifications:
• Bi-directional measurement capability
• ±1% full scale accuracy
• Pressures up to 345 Bar (5,000 PSI)
• Temperatures to 150 °C (300 °F)
• Four flow ranges, two nominal port sizes:
4 - 56 LPM SAE 12
7.5 – 94 LPM SAE 12
11.5 – 227 LPM SAE 16
15 – 321 LPM SAE 16
16. Quad Flow Sensor - Operating Principle
• Two magnetic pick-ups, positioned out of phase
• “Quadrature” displays and counters detect the
leading or lagging phase of the turbine rotation
– Time period between frequency pulses has a different
start/stop time (phase) depending upon forward or
reverse flow
– Consider: clockwise motion from Pick-up #1 to Pick-up
#2, compared with counter clockwise motion
17. Operating Principle (continued)
• First pick-up is used to determine flow rate only
(both directions)
• Second pick-up is used to determine phase:
– Voltages between pick-ups are compared
– When peak voltage on pick-up #1, voltage level of
pick-up #2 will determine if the output signals are
leading or lagging each other
– Phase calculation determines flow direction
18. Quad Flow Sensor Applications
• Bi-directional flow measurement in any hydraulic
system
• Monitor/Governor for hydraulic system:
– Bi-directional flow rate can be used to provide a
“NET” total to the customer:
positive flow - negative flow = NET flow
– NET total can provide data regarding other aspects of
hydraulic system, for example cylinder travel
– Therefore, cylinder travel can be a parameter used to
regulate other areas of the hydraulic system
19. Applications:
• Fork lift speed regulation:
– Fork lift manufacturer uses Quad sensor to determine
height of the forks. This information is used to limit the
maximum operating forward speed of the truck (as forks
go higher, maximum truck speed goes lower).
20. Accessories
Pressure Sensors w/4-20 mA Output
• Pressure ranges from 0 to 15,000 PSI (1034 Bar)
• Accurate readings to ±1% full scale
• NEMA 4X enclosure rating
• Easily installed in Flo-tech turbine meter body
• Compatible with Flo-tech F6700/F6750 Series Displays
Temperature Sensor
• RTD element with 4-20 mA output
• Designed for direct insertion into high pressure systems
• Rated to 6000 PSI (414 Bar)
• Temperature range of –40 °F to 350 °F
• Easily installed in Flo-tech turbine meter body
• Compatible with Flo-tech F6700/F6750 Series Displays
21. Accessories continued
K-Factor Scaler
• Scalable Preamplifier
• Interface for pulse output devices to PLC, RTU,
PC data acquisition cards
• Scale turbine meter output to desired engineering units
Cables
Flo-Tech offers a complete selection of mating cables to
complete your hydraulic measurement package
23. NEW: MC4000
Portable Handheld Analyzer
Includes:
• Carrying case
• Power supply
• All cables and connectors
• CD-ROM with Windows-based
software utility
Optional:
• Flo-tech turbine flow meter
• RPM infra red sensor
24. Thank You
+44 (0)1280 817304 sales@bellflowsystems.co.uk www.badgermeter.co.uk
Bell Flow Systems are the UK representative for Badger Meter