1. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
EDUCATION & QUALIFICATIONS
Bachelor of Engineering in Mechanical
REGISTRATIONS / AFFILIATIONS
 Chartered Professional Engineer (CPEng) - Australia
 Member of the Institute of Engineers Australia
SUMMARY
 Chartered engineer with over 20 years’ experience in senior positions in Safety Engineering and
Loss Prevention, responsible for all aspects of hazard management on projects (both
Brownfield and Greenfield) in the oil and gas and petrochemical industries in the Australia,
Pakistan and Middle East.
 Technical proficiency in Fire and safety systems for the Oil & Gas platforms, Oil & Gas plant.
 Experienced to manage the various fire and safety equipment procurement, technical bid
analysis and packaging engineering. Fair knowledge of local fire and safety equipment
suppliers and well versed with local and international codes and standards. Substantial
experience in a fire protection equipment package engineering.
 Conduct peer review, prepare and analysis of hydraulic model, prepare design book,
verification report and fire protection study reports.
 A proven experience in Design, Test and Commission of Fire and Safety Systems for Oil & Gas
Greenfield Facilities and Brownfield upgrade works.
 Extensive experienced in Pipenet Hydraulic Modelling, Explosion Modelling using FRED
software.
 Extensive experienced on factory acceptance test (FAT) and site acceptance test (SAT) of fire
and safety equipment.
 Liaison with local approving authority, Lloyds, Civil Defense etc.
 Experienced in Safety Case update and impact study, Formal Safety Assessment (FSA)
Studies for offshore oil and gas platform.
 Thorough experienced in risk assessment (qualitative and quantitative). Good knowledge of
noise emission/blast study and explosion/gas mapping.
 Experienced in Safety Critical Systems analysis for offshore oil and gas platform and onshore
plant.
 Experienced in Major Accident Event (MAE) assessment.
 Experienced in HAZOP studies and ALARP workshop and ALARP report, conduct HAZID and
constructability studies.
 Proficient communication and interpersonal skills, combined with the demonstrated capacity to
work in an oil and gas industry environment.
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 1
Rev 6 (03-Feb-09)

2. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
PROFESSIONAL EXPERIENCE
2014 - Present Senior Safety and Risk Engineer, WorleyParsons
Perth, WA
Karat ha Gas Plant (KGP) Life Extension Project – Woodside Energy.
I am working as a senior safety and risk engineer and responsible for the safety and risk activities for the following
projects:
1. Demin replacement system project;
2. Stabaliser 2 external corrosion refurbishment project;
3. Stabaliser 5 external corrosion refurbishment project;
4. Frac 1 external corrosion refurbishment project;
5. Piperack external corrosion refurbishment project.
I am responsible for the complete safety and risk studies e.g. HAZID review, project risk review, HAZOP study,
bow-tie workshop, safety critical element impact analysis, manning limit assessment, safety case impact, over
pressure impact assessment, hide vs habitat assessment, constructability workshop, ALARP studies, risk actions
close out and any safety studies raise during workshops.
Goodwin Alfa (GWA) Echo Yodel Well Heads Suspension and Decom m issionin g (topside) Project –
Woodside Energy.
I am working as a senior safety and risk engineer and responsible for the safety and risk activities e.g. risk
management, safety case impact assessment review, safety critical system impact assessment, HAZID, HAZOP,
ALARP studies, risk actions close out and any safety studies raise during workshops.
Lamber t Deep Develop m e n t – Execute Phase – Woodside Energy
I am working as a senior safety and risk engineer on this project. I am responsible for the safety systems studies for
top side facility including risk assessment, safety case impact assessment, formal safety assessment studies, FHA,
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 2
Rev 6 (03-Feb-09)

3. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
safety critical element impact assessment, Review layout, etc. Conduct HAZID / Constructability workshops and
monitor and close out all actions.
Nort h Rankin Alfa (NRA) Jacket Corrosion Protection – Develop Phase – Woodside Energy
I worked as a lead safety and risk engineer on this project. NRA platform is more than 25 years old and recent
inspection shows the NRA platform jackets are badly corroded and it might lose the wall thickness also. This project
is to deploy the vertical access tool (VAT) and inspect the jackets and braces conditions. VAT is a latest technology
and used by the LBO. I am responsible for the HAZID workshop, design/constructability workshop and dropped
object study and close out all actions.
Nort h Rankin Complex (NRC) deluge syste ms Produc tion Reliability Tests (PRTs) – Woodside
Energy
I have updated the active fire protection testing procedures.
Nort h Rankin Complex (NRC) - Testing of Active Fire Protec tion Syste ms - – Woodside Energy
I have witnessed the active fire protection systems performance test for the North Rankin Complex Offshore
Platform. I have witnessed the following systems:
1. Active fire protection systems (firewater deluge system) for the Well head Modules (9, 10, 22 & 10E);
2. Active fire protection systems (firewater deluge system) for the Process Modules (5, 6, 7 & 8);
3. Active fire protection systems (firewater deluge system) for the Utility Modules (1, 3 & 4);
4. Active fire protection systems (firewater / foam) for the Helideck;
5. Active fire protection systems (firewater / foam) for the hot oil heaters;
6. Active fire protection systems (firewater / foam) for the Pipe Deck Monitors;
7. Active fire protection systems for the (firewater deluge system) for the Module 39.
2008 - 2014 Senior Safety and Risk Engineer, Transfield Worley
Perth, WA
GWA Fire and Safety Syste ms Study - Woodside Energy
I worked as a lead safety and risk engineer on this project. I have completed the following studies:
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 3
Rev 6 (03-Feb-09)

4. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
1. Foam Systems - This study assesses the use of GWA foam system for the hydrocarbon pool fires (top sides,
Modules B, C, and E & L) and sea fires.
2. Dry Deluge Draining - Review dry deluge system and develop recommendations to improve draining of the
low points and eliminate dead legs.
3. Deluge System For Muster Area - This study is to evaluate the requirement of the manual water deluge
system in the Goodwyn A muster areas.
4. Deluge Skid Interconnection Lines -This study is to review the requirement for the air interconnection line
between deluge valves / skids, assess the advantages and disadvantages of the interconnected air line, propose
alternate methods of initiating deluge in connected skid(s) and recommend the preferred option.
5. Industrial Hose Reel - This study is to evaluate the requirement for the hose reels in the process, wellhead,
utility and drilling support modules of Goodwyn “A” (GWA).
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 4
Rev 6 (03-Feb-09)

5. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
NR2 Brow n field Projects – Nort h Rankin Alpha (NRA) Platfo r m
Accountable for the design and upgrade of the fire water deluge spray system for the NRA platform. Carried out
gap analysis for the existing firewater system with the required latest industry practice and national and
international fire codes and standards. Interface with the NRA and NRB firewater systems, design and upgrade of
the NRA helideck deluge firewater/foam monitor system, pipedeck and drill deck foam/water monitor systems.
Design and upgrade the hot oil heater foam/water deluge spray system. Coordinate the surge analysis of the
deluge spray systems and response time of the helideck deluge firewater/foam monitor systems. Responsible for
the peer review of deluge spray system design and hydraulic calculations. Prepared and obtained approval of
design books, data sheets, hydraulic calculations and verification reports. Responsible for the purchasing of
foam/water monitors, foam tanks and foam/water spray nozzles for the helideck deluge firewater/foam system.
I have attended HAZOP workshop for the firewater P&IDs, replacement of condensate pumps etc. Participated in
HAZID workshop for the TPSD installation for the NRA and Angel platform, red hotwork in process modules during
normal operation of the NRA platform etc. Attended number of constructability review of firewater piping
installation, cable tray installation at bridge etc. Carried out risk assessment for the lifting items at the NRA
platform e.g. deluge skids module and Module 5 structures etc. Also, carried out risk assessment for the red hot
work in Module 5 and Module 3.Identified the gap in using the hide and habitat in utility module. Studied the NRA
platform existing fire and gas mapping system and updating the fire and gas mapping system. Responsible for the
NRA platform noise assessment study, NRA safety signs impact analysis.
Responsible for the replacement of secondary firewater ring main, carried out risk assessment for the most
credible surge scenarios, update the surge analysis report etc.
Carried out safety critical systems impact analysis due to decommissioning of the drilling modules (19 & 20) and
modules 15, 16, 17 & 18, prepared safety impact sheet.
Vincent FPSO - Woodside Energy Limite d
I worked as a lead safety and risk engineer on this project.
Water Mist Syste m – Boiler fron t
Prepared and obtained approval of the design book, hydraulic calculations report and developed the hydraulic
models for the water mist system.
Additional Cargo Deck Foam Monito r
Prepared and obtained approval of the design book, hydraulic calculations, hydraulic report and developed the
hydraulic models for the water mist system.
Goodwy n Alfa Platfo r m Brown field Projects –– Woodside Energy Limite d
Accountable for the design of firewater deluge system for the Desander Project - Goodwyn Platform. Prepared and
obtained approval of the design book, hydraulic calculations, hydraulic verification report and developed the
hydraulic models for the firewater ringmain and studied the different fire scenarios. Assisted commissioning team
in achieving the required design parameters during testing and obtaining the approval from Lloyd.
I have done the safety critical systems impact study due to decommissioning of the drilling rig (Module G) and
installation of the condensate filters in process Module B.
Trunkline Onshore Terminal (TOT) - 1 Project - Karrat h a Gas Plant – Woodside Energy Limite d
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 5
Rev 6 (03-Feb-09)

6. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
TOT1 project is for up gradation of existing TOT1 at the Karratha Gas Plant, I have carried out the risk assessment
for the additional flanges.
Lamber t Deep Develop m e n t – Assess Phase 2A
Accountable for the safety systems studies for top side facility including conceptual risk assessment, safety critical
element impact assessment, Review layout, Safety Case impact study etc. Conduct HAZID workshop and monitor
and close out all actions.
2001 - 2007 Manager Fire Protection Section – Dubai Water and Electricity
Dubai, UAE
I was responsible for the fire and safety systems for
 Greenfield projects of 400kV and 132kV sub-stations;
 Brownfield projects of 400kV and 132kV sub-stations;
 Operation and maintenance of existing 400kV and 132kV sub-stations.
I was leading the group of 9 to 21 engineers for project works including consultant’s engineers based on number of
projects. I completed more than 120 nos 132kV sub-station and 10 nos 400 kV sub-station projects. My main
responsibilities in projects were:
 Review and approve the safety systems e.g deluge systems, hydrant systems, gases systems,
emergency evacuation systems, fire detection and alarm system etc;
 Review and approve the drawings;
 Review and approve the fire and safety contractors;
 Review and approve the new fire and safety manufacturer;
 Review and update the Fire Protection and Safety Specifications.
 Review and update the testing procedure and testing formats of fire protection systems.
 Review and update the safety procedures and guidelines.
 Planning and coordinating of Fire Protection Section on short and long term basis.
 Coordination of activities with other section and departments.
 Organizing of sufficient manpower for review of design, site supervision, witnessing testing and
commissioning of fire protection systems.
 Approval of snag list, NODs, test format, MMS data, and as-built drawings.
 Implementation and ensuring compliance of various fire & safety Standards, regulations as per
DEWA Specifications and Code of Practices as per corporate requirement.
 Attend factory acceptance test.
 Visit manufacturer facility for approval as a new supplier.
1997 - 2000 Fire Protection Engineer, Fire Fighting Equipment Dept. Juma Al Majid Est.
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 6
Rev 6 (03-Feb-09)

7. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
Dubai, UAE
Worked with Juma Al Majid Est., EPC (Engineering, Procurement, Construction Company), which undertook fire
and safety projects related Power Generation, Oil & Gas, Petrochemicals, Cement& Fertilizer & Other Process
Industries.
Responsible for basic design, detailed engineering, equipment & material specifications, sizing & selection,
procurement support, construction supervision for QA/QC, testing & commissioning and systems start-ups,
tendering & technical evaluation of contractors, making design reports etc. I have done the following projects from
assess to execute phase:
 Fire and Safety Systems for Oil Storage Facility – Mina Mussaffa, Abu Dhabi, UAE
 Fire and Safety Systems for Sharjah Refinery, Sharjah, UAE
 Fire Protection Systems for EMARAT Petroleum, Dubai, UAE
 Fire Protection Systems for EPPCO Petroleum, Dubai, UAE
 Fire and Safety Systems for Khor Fakkan , Sharjah, UAE
Other Projects:
 CO2 flooding system for Arabian Packaging Plant, Dubai, UAE.
 FM200 system for Juma Al Majid Library;
 Sprinkler system, fire hose reel system, hydrant system and kitchen hood protection system for
the following commercial buildings:
 Grand Hyatt Hotel, Dubai, Al Mazaya Centre, Dubai, City Bank Building, Dubai, Al Moosa
Tower, Ajman Call Centre, Creek Tower, Hyundai workshop, Dubai Airport (GCM and FCM
Building), Al Majaz Tower, Twin Tower, Al Mazaya Centre, Dubai.
1992-1997 Senior Design Engineer, Zelin Pvt. Ltd.
Karachi, Pakistan
Worked with Zelin (Private) Limited, National EPC (Engineering, Procurement, Construction Company), which
undertook projects related Power Generation, Oil & Gas, Petrochemicals, Cement & Fertilizer & Other Process
Industries.
Worked under various capacities; responsible for basic design, detailed engineering, equipment & material
specifications, sizing & selection, procurement support, construction supervision for QA/QC, testing &
commissioning and systems start-ups, tendering & technical evaluation of contractors, making design reports etc.
Involved in the following projects
Southern Electric Power (SEPCOL), 115 MW Power Plant Project:
Worked as Senior Design & Commissioning (Mechanical Utilities, BOPP) on 115 MW Diesel Generating Power
Plant Project at Raiwind, Lahore. The Project was one of the IPPs (Independent Power Projects), executed by a
Consortium of SEMT Pielstick of France (responsible for Diesel Generating Sets), ABB of Germany (responsible
for Switchyard) and Zelin (responsible for Balance of Power Plant (BOPP)). Worked on the following systems:
 Heavy Fuel Oil (HFO) Railway Unloading & Transfer Pumping Station.
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 7
Rev 6 (03-Feb-09)

8. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
 HFO Truck Unloading & Transfer Pumping Station.
 HFO Main Storage Tank Farm with 9000 KL Steel Storage Tanks with Bottom & Suction
Heaters.
 HFO Treatment Unit, Transfer Pumping, Day Tanks and Supply System to Engines.
 Diesel Oil & Lubricating Oil Unloading, Storage & Transfer Systems.
 Steam System for HFO Heating at Unloading Stations & Storage Tanks, Condensate Recovery
System.
 Heat Recovery Steam Generators (HRSG’ s) at Engine Exhausts, Auxiliary Steam Boiler for
Cold Start-ups.
 Plant Fire Fighting Systems including Fire Water Pumps & Mains with Hydrants, Indoor
Hydrants, Fixed Deluge Water Systems for Tanks Cooling, Deluge-Foam System for Engines,
CO2 Total Flooding System for Cable Trenches, Sprinkler System etc.
 Raw & Treated Water Systems with Steel Storage Tanks, Deep Well Pumps, Cooling Water
Systems for Engines including Cooling Towers, Storm Water Drainage System, Waste Water
Treatment System etc.
 Plant Piping Racks and Pipe Supports, Gantries and Ladders.
 Compressed Air Systems.
Kohinoor Energy Limited (KEL), 120 MW Power Plant Project:
Located at Raiwind, Lahore, and this project was one of the IPP’ s, in which Zelin was the sub-contractor of
Toshiba of Japan, working on Mechanical Systems. Worked as Senior Design Engineer on the following systems:
 HFO Gravity Truck Unloading Facility with Steam Heating Coils.
 HFO Storage Tank Farm with 9000KL Tanks with Bottom Heaters.
 Steam & Condensate System.
 Diesel Storage Tanks.
 Firewater Pumping System with Hydrants, Fixed Deluge Water Spray System for Tanks
WAPDA Guddu Thermal Power Plant Project:
Involved as a Senior Design Engineer in the Basic Design, Detailed Engineering and Commissioning of the
followings in collaboration with M&S of Germany:
 HFO Pumping Station comprising Low Pressure Pumps and Piping, Steam Heaters of HFO &
High Pressure Pumps and Piping.
 Soot Blowing and Atomizing Units and Steam PRV Unit for Unit # 4 Boiler System.
 Installation of Regenerative Air Pre-Heater for Unit # 4 Boiler System.
Other Projects:
Design Engineer
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 8
Rev 6 (03-Feb-09)

9. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
 Lucky Cement Plant Project - Mech. Consultancy for Water, Compressed Air & Fire Water
Systems
 WAPDA, Guddu Evaporative Cooler Project - to increase Gas Turbine Efficiency from 85 to
95% during summers.
 Engro PVC Pipe Plant Project - Firewater & Cooling Water System.
 Engro Chemicals, Dharki - Steam & Condensate System Design Project
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 9
Rev 6 (03-Feb-09)

10. Muhammad Nasim
Senior Safety and Risk Engineer
Resume
 Lucky Cement Plant Project - Mech. Consultancy for Water, Compressed Air & Fire Water
Systems
 WAPDA, Guddu Evaporative Cooler Project - to increase Gas Turbine Efficiency from 85 to
95% during summers.
 Engro PVC Pipe Plant Project - Firewater & Cooling Water System.
 Engro Chemicals, Dharki - Steam & Condensate System Design Project
002-000-CPF-016 (007848) HRF-0033 Corporate Base Page 9
Rev 6 (03-Feb-09)