1. MRITYUNJOY GANGOPADHYAY
Mobile: + 91 9051819673/9830303411
E-mail: mjoycal@gmail.com
OR
mjoycal@rediffmail.com
OBJECTIVE:
• 30 years experienced Mechanical Engineering professional with comprehensive
skills in Business Establishment, Business development,Project Management, Quality
Management Systems, Automotive Management Systems, Environmental Management
System, Occupational Health & Safety management System. Quality Assurance and
Inspection & Testing, Seeking engagement in the area of managing Operational
function, where these acquired skills and commitment to excellence will have valuable
application. To contribute significantly in upgrading and maintaining higher quality
level of performance, this in turn will ensure better value for money to ultimate
customers.
::PROFILE:
• Over 25 years experience in Managerial Positions in Industry & Multi National
Organizations with extensive exposure to
Business Development,Administration.Management Systems Assessments,
Quality assurance, Inspection & Testing, Business Development, Trainings,
manufacturing & Project Management
• Extensive experience involving P and L Management, Budgeting, Forecasting,
Operations management, strategic planning, cost containment and reporting
activities. Well experienced in audit management and training with over 3000
audit man-days including ISO 9001, ISO 14001, OHSAS18001 & TS16949
certification audits in India, Sri Lanka , Bangladesh, U.K, Germany, Thailand,
Switzerland,Nigeria in various industry verticals including - Engineering, Project
Management, Automotive,Leather, Health care, Educational, Pharmaceutical and
consumer products verticals
• Exhaustive experience in inspections of various engineering goods, ASME
pressure vessels, storage tanks and heavy structural fabrications, automotive
components , engineering machineries, foundry components for more than 200
clients including TATA MOTORS, ABB ALSTOM, UNICEF & International aid
agencies as per various International and National product standards including
witnessing and verifying results of Non destructive testing .
• Manufacturing experience related to pressure vessels, storage tanks and heavy
structural fabrications & automotive components.
• Lead Auditor since 1993 audited on behalf of SGS, BSi, AQSR, TUV MS,
HSB RS -USA, NSF-ISR-USA, ORION –USA, IRQS, Moody,URS,Cermet,BSCIC for
ISO9001:2008,TS16949:2009, ISO14000-2004,BSOHSAS18001-2007- EAC scope
awarded 14,17,18,19,22,28,29,34,35.
Contd…………..2/=

2. ::2::
• Lead Tutor for IRCA, U.K Approved ISO9000 /14000.18000 Lead Auditor Course
conducted trainings on behalf of SGS-ICS, BATALAS, IQA Global,Moody
,BSI&BSCIC
• Conducting witness audits for approval of competence of Assessors/Lead
Assessors.(ISO 9001, ISO14001& BSOHSAS18001)
• Reviewing assessment reports and approving certificate issue (ISO 9000, ISO
14001& BS OHSAS 18001)
SKILLS:
• Conduct external and internal audits as per ISO 9001-2008, ISO 14001-2004,
BS OHSAS 18001 andTS16949 Standards & PED
• Propose and implement corrective actions based on audit findings.
• Provide trainings on quality management systems.
• Prepare documentation for quality, environmental, OHSAS and TS16949 standards and
access adequacy.
• Evaluate suppliers and conduct second party audits.
• Manage engineering inspection and testing activities.
• Manage non destructive testing methods like RT, UT, PT,MT & DP
• Manage inspections as per ASME/ASTM and other national and International
standards .
• Well conversant with all standard PC based software, packages.
• Trained and fully aware of requirements of these
ISO17020 & ISO17021 guidelines
• Conducted more than Three Thousand manday third party ISO
9000,14000,TS16949 quality system third party audit(s) under accreditation of
NACCB/ UKAS & DAR,NABCB, RAB(ANAB) &IATF
• Conducted more than Five hundred ISO 9000, ISO14000, &
BS OHSAS 18001,TS16949 training courses, including Intensive Awareness,
Documentation, Internal Auditor(s), Lead auditor(s) courses
PROFESSIONAL EXPERIENCE::
1) Organisation: QSS
Position: Chief Operating Officer
From November 2010 to till date
. Responsibilities
Directing all business management, budgeting, forecasting, P & L management, recruitment,
purchasing, administrative and operations management including compliance to accreditation
norms, report reviewing, review of auditors & tutors, allocation of codes, performance appraisals,
Auditing as Lead Auditor against ISO9001/14001/18000/TS16949 standards, Lead Tutor IRCA
U.K approved QMS & EMS course, Conducting Internal audits, impart trainings ,Approval of
QAP, Verification of Inspection reports, Conducting/Guiding during Third party Inspection

3. Contd…………..3/=
::3::
NATURE OF DUTIES PERFORMED ::
Deployment of Time:
• Business Development & Administration - 30%
• Third Party Inspection - 40%
• Certification & Training - 30%
(a)Strategic Planning for the India Operation for ISO 9000,ISO 14000,OHSAS 18000,TS16949,HACCP,
Third Party Inspection, Energy Audit & EMS Services.(b) Budgeting for the Region.(c)
Marketing, Focus on Customer(s) satisfaction, Decision on Corrective & Preventive action for
service improvement of the region.(d) Responsible for Recruitment, Capital purchase,
(e)Administration of the region. Responsible for Business Development in Countries like Sri
Lanka, Bangladesh, Nepal, Bhutan(f) Interaction with client(s), Ministry, Govt. of India
Authorities & Various Foreign Embassies for Business Performance & Development.
Activity Performed for Third Party Inspection
(a)Inspection of various fabrication job, (Structural, MS Sheet/ plate), Castings, Machining items,Forging(s),
Witnessing of various Non-destructive Test such as Radiography, Ultrasonic, Microstructure etc. for Inspection
of components for Pollution Control, Ventilation, AC, Material Handling Projects, Pressure vessels, Industrial
Gear Boxes for Power Plants, Cement Plants & Cross country Projects etc.
(b)Witnessing of Performance Test & Run test of Industrial Machinery, Equipment, as per
National/International Standards.
(c)Inspection of conveyor belt, tyres, Plastic & PVC pipes fittings and tanks, motors, geared motors, control
panels, switchgears, circuit breakers, cranes, Road rollers, etc for UNICEF
(d)Verification of WPS, witnessing of PQR,WPQ for welders.(e) Inspection of Automotive components for
TATA MOTORS(f)Inspection of Exports of TISCO for Bearings, sheet, plate,bars (g)Review of reports of
Engineers and issuance of clearence certificate(s)
(2) Organisation: Moody International
Position: Vice President
From May2009 to October 2010
. Responsibilities
Directing all business management, budgeting, forecasting, P & L management, recruitment,
purchasing, administrative and operations management including compliance to accreditation
norms, report reviewing, review of auditors & tutors, allocation of codes, performance appraisals,
Auditing as Lead Auditor against ISO9001/14001/TS16949 standards, Lead Tutor IRCA U.K
approved QMS & EMS course, Conducting Internal audits, impart trainings ,Approval of QAP,
Verification of Inspection reports, Conducting/Guiding during Third party Inspection.
NATURE OF DUTIES PERFORMED ::
Deployment of Time:
• Business Development & Administration - 40%
• Third Party Inspection - 40%
• Certification & Training - 20%
(III) Organisation:
BSi Management Systems India Pvt Limited
Position: General Manager
From 10th
Sep 2007 till 30th
April 2009
.Responsibilities
Directed all business management, budgeting, forecasting, P & L management, recruitment,
purchasing, administrative and operations management including compliance to accreditation
norms, report reviewing, review of auditors & tutors, allocation of codes, performance appraisals,
Auditing as Lead Auditor against ISO9001/14001/TS16949 standards, Lead Tutor IRCA U.K
approved QMS & EMS course, Conducting Internal audits, impart trainings .

4. Contd…………..4/=
::4::
I V) Organisation:
Saurat Auto Tech Private Limited India (An Automotive component manufacturer)
Position: General Manager-Quality – from June 2003 to August 2007
Responsibilities
Directed all business management, budgeting, forecasting, P & L management, purchasing ,
administrative and operations management including compliance to certification
requirements , Conducting Internal audits, impart trainings
Overall control for quality of all automotive component manufacturing of brakedrum, clutch
Housing, steering items, engine components
Using tools APQP,PPAP,MSA,FMEA and control plan,control charts,Pp/PpK and Cp/CpK
analysis, 6 Sigma Kaizen,OEE,TPM.One piece flow,Process flow diagram and line balancing
from customer specification and drawing. Management Representative for TS16949 system
effectiveness
Key Achievements -
1. Achieved ISO 9001 thereafter TS16949:2002 certification from TUV.
2. Reduced Quality cost by 30% over the years
3. Achieved Grade 1 supplier status from TATA & Hyundai Motors
V ) Organisation: TÜV SUDDEUTSCHLAND INDIA Pvt Ltd
Position: Regional Manager-East from March 1999 to May 2003
Responsibilities
NATURE OF DUTIES PERFORMED : In TÜV SUDDEUTSCHLAND INDIA
Deployment of Time:
• Business Development & Administration - 30%
• Third Party Inspection - 40%
• Certification & Training - 30%
(a)Strategic Planning for the Eastern India Operation for ISO 9000,ISO 14000,QS
9000,TS16949,HACCP,
Third Party Inspection, Energy Audit & EMS Services.(b) Budgeting for the Region.(c)
Marketing, Focus on Customer(s) satisfaction, Decision on Corrective & Preventive action for
service improvement of the region.(d) Responsible for Recruitment, Capital purchase,
(e)Administration of the region. Responsible for Business Development in Countries like Sri
Lanka, Bangladesh, Nepal, Bhutan(f) Interaction with client(s), Ministry, Govt. of India
Authorities & Various Foreign Embassies for Business Performance & Development.
Activity Performed for Third Party Inspection
(a)Inspection of various fabrication job, (Structural, MS Sheet/ plate), Castings, Machining items,Forging(s),
Witnessing of various Non-destructive Test such as Radiography, Ultrasonic, Microstructure etc. for Inspection
of components for Pollution Control, Ventilation, AC, Material Handling Projects, Pressure vessels, Industrial
Gear Boxes for Power Plants, Cement Plants AND Cross country Projectsetc.
(b)Witnessing of Performance Test & Run test of Industrial Machinery, Equipment, as per
National/International Standards.
(c)Inspection of conveyor belt, tyres, Plastic & PVC pipes fittings and tanks, motors, geared motors, control
panels, switchgears, circuit breakers, cranes, Road rollers, etc for UNICEF
(d)Verification of WPS, witnessing of PQR,WPQ for welders.(e) Inspection of Automotive components for
TATA MOTORS(f)Inspection of Exports of TISCO for Bearings, sheet, plate,bars (g)Review of reports of
Engineers and issuance of clearence certificate(s)
Activity Performed for Certification and Training Services
(a)ISO 9000, ISO 14000, QS 9000, EN 124, TS16949,HACCP Audit planning & preparation.
(b)Performance, Reporting & Follow up for ISO 9000 & ISO14000, HACCP Third Party Audit(s),
(c)Reviewing assessment reports of region for ISO9001.(d)Conducting witness for approval of audits
competence of Auditors/Lead Auditors for ISO 9001. (e) Conducting Training Programme on
Awareness, Documentation, Internal Audit as a Tutor for ISO 9000, Quality Management System(s),
ISO 14000 Quality Management System(s).(I) Certification of BPCL Petrol Pumps for “PURE
FOR SURE “ (j) Conducting EIA,EMP studies.

5. Contd…………..5/=
::5::
VI )
Organisation: SGS India Limited
Position: Head of Project Inspection & Certification, Training (Eastern India)
– from April 1991 to February 1999
Responsibilities
• Preparation of scope of work from Customer’s Order.
• Correspondence with customer(s)/supplier(s).
• Vendor Survey and its evaluation.
• Preparation & finalisation of QAP with supplier(s).
• Sequential inspection & despatch planning and expediting of the job.
• Inspection of various fabrication job, (Structural, MS Sheet/ plate),
Castings, Machining of items, Witnessing of various Non-destructive Test such as
Radiography, Ultrasonic, Microstructure etc. and Machining jobs for Inspection
of components for Pollution Control, Ventilation, AC, Material Handling Projects,
Pressure vessels, Industrial Gear Boxes, Power Plants, Cement Plants etc.
• Witnessing of Performance Test & Run test of Industrial Machinery,
Equipment, Plant as per National/International Standards.
•Export consignment Inspection as well as Indigenous Inspection and clearance,
Issuing of release note. Raising invoices to customer(s) and collection of payment.
• Marketing ISO 9000 training & certification services.
• Conducting training of personnel in the use of ISO 9000 Quality System.
- Awareness Training of Management Staff.
- Intensive Training of personnel in ISO 9000 Quality System.
- Documentation workshop on ISO 9000.
- Internal Auditor Training.
• Conducting EIA,EMP studies
• Pre-Certification Audit.
• Certification Audit.
• Organising/Conducting ISO 9000 LEAD AUDITORS TRAINING
& EXAMINATION (IRCA,U.K approved Course)
Contd…………..6/=

6. ::6::
VII) Organisation: Air Conditioning Corpn. Ltd-India
Position: – Planning Engineer (Projects) from Oct’88 to March’91
Responsibilities
Handling as “ PLANNING ENGINEER” (Projects) total contracts of NTPC STPP
Khalagoan & Farakka Ventilation Project total job value was 5 (five) crores and export
Bangladesh Air-Conditioning Job.
• Vendor Survey.
• Preparation of PERT/BAR Charts.
• Preparation of Enquiries for suppliers.
• Suppliers’ Quotation Evaluation.
• Datasheet, Q.A.P, Technical Specifications preparation and finally to get it
approved by NTPC or by customer and co-ordination of customer inspection
clearance.
• Verification of inspection as per QAP and issuance of release note
• Preparation of contracts procedure.
• Preparation of weekly progress planning schedule.
• Correspondence with customer/NTPC (Delhi) suppliers and technical
discussions with them.
• Preparation of progress Status Report.
• Preparation of BILL of material.
• Monitoring of Project.
• Erection Planning.
• Production / Despatch Planning.
• Invoicing Planning & Collection of Payment.
VIII)Organisation: Flakt India Ltd.
Position: – Inspection Engineer/ Contracts Engineer/ Resident Engineer from
June’85 to Sept’88
Responsibilities
As an Inspector inspection of fabricated (sheet, plate, Structural ), jobs, Machining jobs,
Castings,Forgings dealing with NTPC,BHEL,,M.N.D, MECON, CLW, EIL, Inspection
In Contracts - handled a job for Bajaj Tempo Ltd. (Indore) Consultants M/s. Damler Benze”,
job value 2.3 crores for Automatic Paint Finishing system.
• Vendor survey.
• Progress Planning.
• Correspondence with supplier, Customer & Inspection agency.
• Monitoring of Project.
• Preparation of weekly job schedule.
• Preparation of Progress Status Report
• Invoicing & Invoicing Planning.
• Collection of payment for company.
Contd…………..7/=

7. ::7::
AS RESIDENT ENGINEER / SITE INCHARGE:
Total incharge of site to get the job as per time schedule and Q.A.P of customer upto their
entire satisfaction and to get payment from customer , certifying Sub-vendor job, Preparation
of Erection Planning Schedule, Preparation of Cash Flow Statement, bank Accounts, etc.
IX) Organisation: TITAGARH STEELS LIMITED
Position: – Jr. Engineer (Quality Control) for 17 months
Responsibilities
Inspection of Patterns, Castings, Moulds, Radiography Testing, Micro-Structure Sample
Preparation & Observation.
EDUCATIONAL QUALIFICATIONS:
• Mechanical Engineering securing first class in all the examinations with foundry
technology as specialization.
PROFESSIONAL QUALIFICATIONS:
• IATF –TS16949:2008 examination for Third Party CB Auditors with Green Status.
• Passed Lead Assessor (ISO 9000) from P.E.BATALAS, U.K.
LEAD AUDITOR Registered with IRCA UK. Registration No. A 011643
• Passed ISO 14000 EMS Lead Auditor Course EARA U.K approved, securing 5
EARA points in examination.
TRAININGS:
• ISO 17021: Trained and fully aware of requirements of this standard.
• Introduction to Integrated Management Systems
• HACCP/ISO22000 Awareness training
• Awareness training on ISO17025 ( Competence of Testing & Calibrations Labs)
• Attended workshop on balanced score card
• Six sigma awareness training
• 5- S Implementation training
• Kaizen/Continuous Improvement training
• Welding Inspection course from HSB, India.
• Awareness training on ASME Standards.
• Selected by Indian Institute Of Management ,Calcutta, and undergone training on
ENVIRONMENTAL ECONOMICS, under the India: Environmental Management
Capacity Building ,Technical Assistance Project Aided by the World Bank during
27-31 January 2003.
• Trained by certifier from The Protocol School of Washington in Corporate Etiquette
& International Protocol of Soft Skills
Contd…………..8/=

8. ::8::
PERSONAL DETAILS
FATHER’S NAME : LATE ASUTOSH GANGULY.
ADDRESS FOR COMMUNICATION: 26/2, KHANPUR ROAD KOLKATA - 700 092,INDIA
DATE OF BIRTH
MARITAL STATUS
NUMBER OF CHILDREN
: 23RD
MARCH, 1963
: Married.
: Two.