AIDY S RESEARCH CV

1
AIDY’S RESEARCH CV
Dr. Aidy Ali
B.Eng. M.Eng, Ph.D,
MESIS
Associate Professor
Department of Mechanical and Manufacturing
Engineering,
Faculty of Engineering,
Universiti Putra Malaysia
43400 UPM Serdang
Selangor Malaysia
Aidy Ali is an Associate Professor of mechanical Engineering at Universiti Putra Malaysia
(UPM). He received his first degree in Mechanical Engineering from Universiti Putra
Malaysia, 1999, then continued studies at Universiti Kebangsaan Malaysia (UKM) in
Manufacturing System Engineering, leading to Master degree. He is working on simulating
crack propagation of elastic plastic material under mixed mode loading conditions. He was
awarded with a M. Eng. degree in 2002. After that, his pursued his PhD degree in
Improving Fatigue Life of Aircraft Components by Using Surface Engineering at University
of Sheffield, UK. He was awarded a PhD degree in March 2006. His expertise is related to
mechanical Fatigue and Fracture of metallic materials, Failure assessment, Failure
prevention analysis, Reliability engineering prediction, Crash analysis and Sports
Engineering.

2
B. Education and academic qualification
Degree University Awarded Year
PhD University of Sheffield 2006
Phd Thesis Titled: Improving the fatigue strength of aircraft component by using surface
Engineering
Master Universiti Kebangsaan Malaysia 2002
Master Thesis Titled: Simulation of elastic plastic crack under mixed mode loading conditions
First Degree Universiti Putra Malaysia 1999
Bachelor Thesis Titled: Designing Door Latch
C. Administrative duties and other relevant appointment
No. Position Department/Faculty/Other
Institution
Year Duration
1 Emergency Response
Planning Committee
Faculty of Engineering
2006 to date 4 years
2 Head of Strength of
Materials Laboratory
common lab
2006 to date 4 years
3 Head of CAD/CAM
laboratory
Department of Mechanical
2006 to 2007 2 years
4 Head of Automotive
Program
Institute advanced
technology (ITMA)
2008 to 2010 3 years
5 Industrial training
coordinator
Department Department of
Mechanical
2006 1 year
6 Head of material
research working
group
2008 to 2009 2 years
7 Auditor ISO of
Engineering
2006 to 2007 2 years
8 Committee of
curriculums
development
2008 to date 1 year
9 Committee of material
characterisation
laboratory
2008 to date 1 year

3
10 Head of Industrial
Training Coordinators
2009 1 year
11 Coordinator of Sport
Components
Centre of co curriculum
2009 to 2010 1 year
12 Head of Laboratory
Physical Performance
and Skills Analysis
Sports Academy
2010 to date 0 year
13 Editorial Board International Journal of
Automotive & Mechanical
Engineering
(IJAME) ISSN no: 1985‐9325
2009 to date ½ year
D. Academic awards and recognition
No. Award/Recognition Organisation
Awarded
Date
1 Bronze Medal in Research Innovation,
Commercialisation (Title Improving the fatigue
life of aircraft components by using surface
engineering)
UPM 16‐17 March
2006
2 Gold Medal in PRPI Research and Innovation
Exhibition , (Life prediction for multiple cracks in
FSW joints)
UPM 29‐31 July 2008
3 Silver Medal in PRPI Research and Innovation
Exhibition , UPM (Title Simulation of fatigue life
in friction stir welded joints)
UPM 29‐31 July 2008
4 Bronze Medal in PRPI Research and Innovation
Exhibition , (Auto Adjust Centre of Gravity (COG)
Generator)
UPM 28‐30 July 2009
5 Excellent service UPM UPM 2006
8 A excellent researcher award 2009 Faculty of
Engineering UPM.
Faculty 2009
8 Quality service UPM UPM 1999
9 Number 3 in Top 25 most downloaded research
articles in International Journal of Fatigue
ELSEVIER 2007
10 Number 7 in Top 25 most downloaded research
articles in International Journal of Fatigue
ELSEVIER 2008
11 Key researcher for fracture and fatigue research
in Memorandum of Understanding, UPM‐
UNIVERISTY OF SHEFFIELD
UPM 2008

4
12 Respondent of Academician Peer Review THES,
TIMES HIGHER EDUCATION RANKING 2009
International 2009
13 Respondent of Academician Peer Review QS, Top
university ranking 2010
International 2010
E. Academic duties/committee members
No. Title Level
(International/National/University/Faculty/Department)
Year
1 Secretary University, Advanced Technology Congress 2009 2008‐2009
2 Treasurer 8th
Conference on Fracture and Strength of Solid,
International, Society of Fracture Asia, Far East Oceanic
Society (FEOS)
2010
3 Co Chairman 6th
Conference on Aerospace and Mechanical
Engineering, World Engineering Congress (WEC)
2010
4 Treasurer International, Mini Symposium Fracture and Strength of
solid. Asia, Far East Oceanic Society (FEOS)
2009
5 Advisor University, National Symposium on Polymeric Materials
2009
2009
6 Scientific
Committee
University, National Symposium on Polymeric Materials
2009
2009
7 Secretariats University, Conference on Alternative and Renewable
Energy (CARE 2009)
2009
8 Editorial
Board
International Journal of Automotive & Mechanical
Engineering (IJAME) ISSN no: 1985‐9325
2009
9 Editor Special issue of NSPM 2009, Issue Journal IOP
Conference Series Materials Science and Engineering
2010
10 Guest Editor Special issue of NSPM 2009, Issue Journal Pertanika
Journal Science and Technology
2010
11 Chief Editor Conference proceeding 9th
National Symposium of
Polymeric Materials NSPM 2009
2010
12 Editor Special Issue on 8TH FEOFS 2010, Key Engineering
Materials, (KEM) Thomson ISI.
2010
13 Scientific
Advisory
Committee
2nd NATIONAL CONFERENCE in MECHANICAL ENGINEERING
for RESEARCH & POSTGRADUATE STUDENTS
2nd NCMER 2010
2010
F. Teaching activities
No. Code and Name of Courses Credit
Hour
Number of
Students
Teaching
Assessme
Semester/Academi
c Year

5
nt
1 KMP 3101 Strength of
materials, Laboratory
1 80 4.7/5 Sem 2, 2005/06
2 KMP3101 Strength of
materials, Lecture
3 80 4.63/5 Sem 1, 2006/07
3 KMP3101 Strength of
materials , Tutorial of 2
groups
2 80 4.63/5 Sem 1, 2006/07
4 KMP3918 Industrial Training 5 76 4.6/5 Sem 1, 2006/07
5 KMP3103 Applied of
Strength of Materials
4 80 4.65/5 Sem 2, 2006/07
6 EMM 3490 Strength of
Materials (KBP group),
3 80 4.15/5 Sem 1, 2007/08
Materials (KKA group),
3 80 4.51/5 Sem 1, 2007/08
Materials I
3 80 4.22/5 Sem 2, 2007/08
Materials II
3 80 4.53/5 Sem 2, 2007/08
Materials (KKA group)
3 80 4.54/5 Sem 1, 2008/09
11 KMP 5103 Advanced
Fracture Mechanics
3 40 4.7/5 Sem 1, 2008/09
12 EMM 3605 Engineering
Design II
3 80 4.6/5 Sem 2, 2008/09
13 KMP 5105 Inelastic stress
analysis
3 40 3.93/5 Sem 2, 2008/09
14 KMP 5103 Advanced
Fracture Mechanics
3 40 4.7/5 Sem 1, 2009/10
15 EGTM 313 Technology of Materials, (Kolej INPENS) 3 August 2000‐July 2002
16 EGHT 313 Heat Transfer, (Kolej INPENS) 3 June 2001 –May 2002
17 EGIR 313 Introduction to Robotic (Kolej INPENS) 3 December 2001 –July
2002
18 EGTB 313 Turbo machinery (Kolej INPENS) 3 December 2001‐ July
2002
19 KMP 3603 Engineering Design 1 (Kolej IKRAM) 3 May 1999/2000
Semester
19 KJM 311 Strength of Materials II (UITM) 4 2006
20 KJM 522 Vibration (UITM) 4 2006

6
G. Supervision of students
Number Prog.
Level
Name of Students and Title of
Thesis/Project
Role Status Year
Graduated
1 PhD Mehdi Bayat
GS15720 Improving the
structural and efficiencies of
FGM disks
Co‐supervisor Completed 2008
2 PhD Omar Suliman Zaroog
GS19116 Modelling of
residual stress relaxation of
aircraft Al 2024‐T 351
Main Supervisor Completed 2010
3 PhD Luay Hashem Abbud
GS22799 Ballistic impact
performance of armor
composite materials targets
under high velocity impact
4 PhD Suriani Binti Mat Jusoh
Modelling of Fatigue Life of
Kenaf /Epoxy by Using
Thermal Imaging Technique
Main Supervisor Ongoing Expected
2012
5 PhD Salwani Binti Mohd Salleh
GS26542 Simulation of
durability of high performance
design of concept car
2012
6 PhD Ali Hassan Zadeh Lileh Koohi,
GS25956 Crash Simulation of
Automotive Components
2013
7 PhD Fauzan Djamaluddin
Pallajareng ,Crash Simulation
of Automotive Components
2013
8 PhD Ng Sok Choo GS 19742
Internal surface Flaws
reconstruction of composite
materials for product
inspection in robotized
manufacturing cells
Co‐supervisor Ongoing Expected
2011
9 PhD Tezara Cionita GS 15850
Measurement of indoor air
quality parameters in nursery
rooms
2012

7
10 PhD Majid Davoodi GS19627
Development of Car Bumper
Beam by hybrid natural fiber
reinforced polymer
composites
2011
11 PhD Abdul Rahim Bin Omar
GS21859 The effect of the
ultravilot radiation from
shielded metal arc welding
process to human eyes in the
indoor working environment
2012
Prog.
Level
Thesis/Project
Role Status Year
Graduate
d
1 Master Amirreza Fahim Golestaneh
GS16938 Simulation of
fatigue crack growth in 2024‐
T351 aluminium aircraft
friction stir welded joints
2 Master Nur Azida bt. Che Lah
GS18800 Improving the
fatigue strength of fusion
welded joint by using surface
engineering
3 Master Reza Afshar Hossienabadi
GS20884 AUTO adjust Centre
of gravity simulation
4 Master Farzad Tahriri GS16337 An
Analytical Hierarchy Process
Approach for supplier
evaluation and selection
5 Master Azim Atollahi Oshkour
GS15628 Investigation of
crack propagation in
aluminium tube
6 Master Maryam Hosseini GS19927
Experimental determination
of fatigue life of R60 rubber
engine mount

8
7 Master Zainab Shaker Radif GS20686
Development of Green
Combat Armor from kenaf
fibre
8 Master Raizal Azhar Abd. Razak
GS19311 Risk based
Inspection Implementation at
TNB Combined Cycle Power
Plants
9 Master Sameer Adnan Ibraheem
GS19835 Development of
insulator board from Kenaf
Fibre
10 Master Hazem K Al Sultaney GS20340
Development of
Combinatorial Optimisation
for Cutting Tool Path Strategy
11 Master Babak Niroumandrad
GS20691 Bank performance
and efficiency
12 Master Asmawi bin sanuddin
GS23378 A method of
fabrication of Functionally
Graded Materials FGM Disks
23 Master Syazwan bin Abdul Samad
GS23378 Simulation and
Modelling of lifetime
estimation of automotive
engine mount.
24 Master Rajdave Singh Sidhu GS
23237 Experimental
determination of fatigue of
elastomeric automotive
jounce bumper
25 Master Nurhaniza Mohamad Finite
element analysis of
composites materials used in
aerospace applications
26 Master Abdul Hakim bin Abdullah
Fatigue behavior of kenaf
fibre vinyl ester composite
27 Master Saeed Jabalamelian. A
numerical analysis of sheet
Main Supervisor Writing up Expected
2011

9
bulging process using male die
by explosive forming method
28 Master Zahra Dastizadeh. The use of
infrared camera in detection
the defect in bio composites
Main Supervisor On going Expected
2011
29 Master Khairul Azhar Bin Mohammad
GS25022 Investigation of
creep fatigue crack
propagation in aluminium
tube shell
Main Supervisor On going Expected
2011
30 Master Alina Bte Aminuddin
GS25077 Study of thermal
comfort using Infrared
Thermography
Co‐supervisor On going Expected
2012
31 Master Yong Thian Haw
GS27494 Niti Shape Memory
Alloy for Fractured Bone
Fixation
Co‐supervisor On going Expected
2012
Number Prog.
Level
Thesis/Project
Role Status Year
Graduate
d
1 Bacelor Lum Wai Hung Strength
investigation of mechanical
fastening for sports
applications
Main Supervisor Completed
GRADE A‐
2007
2 Bacelor Ting Wei Yao Simulation and
experiment of single lap
bolted joint in bending.
GRADE A
2007
3 Bacelor Tung Chun Yong Strength
investigation of high load
transfer joints.
GRADE A
2007
4 Bacelor Hein Je Voon@ Fong Je Voon
Fatigue simulation of fusion
weld joints.
GRADE A
2007
5 Bacelor Wong Shaw Woei Simulation
of adhesive mechanical
joining for electronic
applications.
GRADE A‐
2007
6 Bacelor Saravanan A/L Tangavellu
Improving manufacturing
system of Electronic Industry
GRADE B+
2008

10
7 Bacelor Tan Soo Chin
(BEST PROJECT AWARD
2008) Simulation and
Experiment of crack
propagation in steel plate
under compression load
GRADE A
2008
8 Bacelor Ng Keng Hean (BEST
STUDENT AWARD 2008)
Characterisation of genuine
and ageing of PC‐PET plastic
for electronic applications
GRADE A
2008
9 Bacelor Long Siong Lee 130741
Simulation of soft drink can
under crash
GRADE A‐
2009
10 Bacelor Ho Boon Yee 129723
Simulation of impact test of
genuine and ageing of PC PET
plastic for electronic
applications (BEST PROJECT
AWARD 2009)
GRADE A
2009
11 Bacelor Chan Wei Chieh 130279
Simulation of fatigue of
elastomer parts
GRADE A
2009
12 Bacelor Jesper Tohr Eng Siang 130582
Charaterisation of eging
effect to plastic materials for
telecommunication
applications
GRADE A‐
2009
13 Bacelor Saifulliwan Ezzedin Sinin
133187 Characterisation of
genuine and ageing of natural
fiber composite
(BEST PROJECT AWARD
2009)
GRADE A
2009
14 Bacelor Tong Ming Wen
137986. Simulation of crack
propagation through
composite materials
GRADE A
2010
15 Bacelor Yeap Boon Teong
138160
Simulation of crack in
Functionate Graded Materials
(FGM) plate
GRADE A
2010

11
16 Bacelor Lai Jin Hui 137980
Simulation of crack in rubber
automotive components
GRADE A
2010
H. Publications
JOURNALS PUBLISHED
1) Aidy Ali, A. K. Arifin, S. M. Sapuan, M. H. Yunin, Analisis Retak Elastik‐Plastik Dengan
Kaedah Unsur Terhingga Kes Bebanan Mod Bergabung, Journal of Industrial Technology,
Vol 13 No. 1, 2004, p:53‐67 (ISSN 0128‐4940)
2) Aidy Ali, A. K. Arifin, M. R. M. Zin, S. M. Sapuan, M. H. Yunin, M. R. Osman, Elastic
Plastic Crack Analysis By Finite Element Method Under Mixed Mode Loading Conditions,
Suranaree Journal of Science and Technology, Vol 11 No. 2, 2004, p:91‐96
3) Aidy Ali, M. W. Brown, C. A. Rodopoulos, S. Gardiner. Characterization of Friction Stir
Welding 2024‐T351 AL Alloy, Journal of Failure Analysis and Prevention, ASM
International. Volume 6 (4) August 2006, pp: 83‐96(14). (Scopus)
4) Aidy Ali, X. An, C. A. Rodopoulos, M. W. Brown, P. O'Hara, A. Levers d and S. Gardiner,
The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024‐T3 Aluminium
Friction Stir Welds ‐ International Journal of Fatigue, Vol 29, 2007 , p:1531‐1545. Impact
Factor: 1.56 (Thomson ISI)
5) Aidy Ali, Ting Wei Yao, Nuraini Abdul Aziz, Mhd. Yunin Hassan, Barkawi Sahari,
Simulation and experimental work of single lap bolted joint tested in bending, Suranaree
Journal of Science and Technology, Vol 14 No. 4, 2007, p:331‐345
6) Aidy Ali, Mike W. Brown, C. A Rodopoulous. Modelling of crack coalescence in 2024‐
T351 Al alloy friction stir welded joints. International Journal of Fatigue, Vol 30, 2008,
p:2030‐2043. Impact Factor: 1.56 (Thomson ISI)
7) Aidy Ali, Tinia Idaty Mohd. Ghazi, Mehdi Zadeh Mohammadi. Constant Cyclic Loading
Fatigue Crack Growth Modelling. International Review of Mechanical Engineering .Vol 2, N
4, July 2008. p:550‐560 (Scopus).
8) Aidy Ali and Omar Suliman Zaroog, Characterisation and Fatigue of friction stir welding.
Suranaree Journal of Science and Technology Vol 15 No. 2, 2008, p:95‐106

12
9) Aidy Ali, Mike W. Brown, and Omar Suliman Zaroog ,Fatigue Damage of 2024‐T351
Aluminium Alloy Friction Stir Welding Joints. Part 1: Characterisation. Suranaree Journal of
Science and Technology Vol 15 No. 2, 2008, p:107‐116
10) Farzad Tahriri, Mohd. Rasid Osman, Aidy Ali, A review of supplier selection methods in
manufacturing industries, Suranaree Journal of Science and Technology Vol 15 No. 3,
2008, p:201‐208.
11) Aidy Ali, Mike W. Brown, and Omar Suliman Zaroog ,Fatigue Damage of 2024‐T351
Aluminium Alloy Friction Stir Welding Joints. Part 2: Fatigue Damage. Suranaree Journal of
Science and Technology Vol 15 No. 4, 2008, p:261‐270.
12) A. F. Golestaneh ,Aidy Ali, W. S. V. Wong, F. Mustapha, M. Z. Mohammadi. Simulation
of fatigue crack growth in friction stir welded joints in 2024‐T351 al alloy. Suranaree
Journal of Science and Technology Vol 15 No. 4, 2008, p:271‐286
13) Tinia Idaty Mohd. Ghazi, E. Soon How, Aidy Ali and S. M. Sapuan .Wastewater
Treatment Using Photochemical Oxidation . International Journal of Chemical Sciences Vol
6 No. 3, p:1241‐1265, 2008. (Chemical Abstract).
14) Farzad Tahriri, M. Rasid Osman, Aidy Ali, Rosnah Mohd. Yusoff, Alireza Esfandiary,
AHP approach for supplier evaluation and selection in a steel manufacturing company .
Journal of Industrial Engineering and Management Vol 1 No. 2, p:54‐76. 2008. (Scopus)
15) A. F. Golestaneh, Aidy Ali, S. V. Wong, F. Mustapha. M. Zadeh. Computational
investigations of crack behavior in friction stir welding. Simulation: Transactions of The
Society for Modeling and Simulation International. Vol 85 No. 1, p:45‐59. 2009. Impact
16) M. Bayat, B. B. Sahari, M. Saleem, Aidy Aliand S. V. Wong . Thermoelastic Solution of
a Functionally Graded Rotating Disk with Variable Thickness and bending Based on the
First Order Shear Deformation Theory. Journal Thin Wall and Structure Vol 47 No. 5,
p:568‐582, 2009.Impact Factor: 0.85. (Thomson ISI)
17) A. F. Golestaneh ,Aidy Ali, M. Z. Mohammadi . Modelling the fatigue crack growth in
friction stir welded joint of 2024‐T351 al alloy Materials and Design 2009. Vol 30 p 2928‐
2937. Impact Factor: 1.107 (Thomson ISI)
18) A. F. Golestaneh ,Aidy Ali. Application of numerical method to investigation of fatigue
crack behavior through the friction stir welding. Journal of Failure Analysis and Prevention,
ASM International. Volume 9 (2) April 2009, pp: 147‐158. (Scopus)

13
19) Reza Afshar, Aidy Ali, B. B. Sahari. Auto generation of center of gravity of tubular
structure during crush deformation . International Journal of Computational Methods.
Volume 6 (2) June. 2009. pp. 333‐348. Impact Factor: 0.89 (Thomson ISI)
20) Omar Suliman Zaroog, Aidy Ali, B. B. Sahari and Rizal Zahari. Modelling of Residual
Stress Relaxation: A review. Pertanika Journal of Science and Technology. Volume 17 (2)
325‐336 July 2009. (Scopus).
21) Nur Azida Che Lah, Aidy Ali, Napsiah Ismail. Characterisation of fusion welded joint: A
review. Pertanika Journal of Science and Technology. Volume 17 (2) 289‐298, July 2009.
(Scopus).
22) M. Zadeh, Aidy Ali, A. F. Golestaneh, B. B. Sahari. Three dimensional simulation of
fatigue crack growth in friction stir welded joints of 2024‐T351 al alloy. Journal of scientific
and industrial research. Volume 68 (9) 775‐782, September 2009. Impact Factor: 0.47
(Thomson ISI)
23) M. Bayat, B. B. Sahari, , M. Saleem Aidy Ali, and S. V. Wong. Bending Analysis of a
Functionally Graded Rotating Disk Based on the First Order Shear Deformation Theory ,
Applied Mathematical Modelling. Volume 33 (11) 4215‐4230 November. 2009. Impact
24) Aidy Ali , Nur Azidah Che Lah ,Tan Soo Chin. Simulation of crack under compression
load. International Review of Mechanical Engineering . Vol 3 (2) March 2009 p:203‐208
(Scopus)
25) Aidy Ali, M. Hosseini , B. B. Sahari. Fatigue Life Modeling for Elastomeric Materials: A
Review International Review of Mechanical Engineering . Vol 3 (3) May 2009 p:332‐338
(Scopus)
26) Aidy Ali, A. B. Sanuddin, Chan Wei Chieh, Reza Afshar. Fatigue simulation of
elastomeric materials. International Review of Mechanical Engineering Vol 3 (4) July
2009 p:461‐466 (Scopus)

14
27) Aidy Ali, A. B. Sanuddin. Characterisation of ASTM A516 grade 7 fusion welded joints.
International Review of Mechanical Engineering Vol 3 (5) November 2009 p:758‐766
(Scopus)
28) Omar Suliman Zaroog, Aidy Ali, B. B. Sahari and Rizal Zahari. Relaxation of residual
stress. Part 2: cyclic relaxation. American Journal of Engineering and Applied Science. 2(4)
759‐763, 2009 (Ebsco)
29) M. M. Noor, K. Kadirgama, Aidy Ali, M. M. Rahman, Z. Ghazalli. Prediction of end‐of‐
life strategies for household equipments using artificial intelligent. American Journal of
Applied Sciences. . 6 (10): 1838‐1844, 2009 (Thomson ISI)
30) Omar Suliman Zaroog, Aidy Ali, B. B. Sahari and Rizal Zahari. Relaxation of residual
stress. Part 1: cyclic relaxation. Journal of Scientific and Industrial Research. Volume 68
(12) 1035‐1037, December 2009. Impact Factor: 0.47 (Thomson ISI)
31) Aidy Ali, S. M. Sapuan, M. W. Brown . Studies on 2024‐T351 Friction Stir Welding
joints. International Journal of Nano System Technology, Electrical Engineering and
Electronics Systems Vol 2 No.1‐2, p:39‐46. 2009.
32) Nur Azida Che Lah, Aidy Ali, Napsiah Ismail, Lim Poo Chai, Abdul Aziz . The effect of
control shot peening on fusion welded joints. Materials and Design Vol 31 p:312‐324
2010. Impact Factor: 1.518 (Thomson ISI)
33) Abdul Rahim Abu Talib, Aidy Ali, Mohamed A. Badie. Nur Azidah Che Lah, A. F.
Golestaneh. Designing a hybrid, carbon/glass fiber‐reinforced, epoxy composite
automotive drive shaft . Materials and Design Vol 31 p:514‐521, 2010. Impact Factor:
1.518 (Thomson ISI)
34) Abdul Rahim Abu Talib, Aidy Ali, G. Goudah, Nur Azidah Che Lah, A. F. Golestaneh.
Development of composite based elliptic springs for automotive applications Materials
and Design Vol 31 p:475‐484, 2010. Impact Factor: 1.518 (Thomson ISI)
35) Aidy Ali, A. B. Sanuddin, Saifuliwan Ezzeddin.The effect of ageing on arenga pinnata
fibre reinforced epoxy composite Materials and Design Vol 31 p:3550‐3554, 2010. Impact
36) Aidy Ali, Tung Chun Yun, Z. A. Zulkefli, Nuraini Abd Aziz,B. B. Sahari. M. Zadeh,
Strength Investigation of Thick Welded T‐ Joint using Finite Element Modelling, Defense
Science Journal, Vol 60 (1) p:112‐118, 2010. Impact Factor: 0.118 (Thomson ISI)

15
37) Aidy Ali, M. Hosseini, B. B. Sahari. A Review of Constitutive Models for Rubber‐Like
Materials. American Journal of Engineering and Applied Science. 3 (1) 232‐239, 2010
(Ebsco)
38) Loh Siong Lee, Aidy Ali, A. B. Sanuddin, Reza Afshar. Simulation and experimental
work on a thin‐walled structure under crushing. Journal of failure analysis and prevention
ASM international . 10, 143–151 (Scopus)
39) Aidy Ali, M. Hosseini, B. B. Sahari. Continuum damage mechanics modeling for fatigue
life of elastomeric materials International Journal of Stuctural Integrity ,Vol. 1 No. 1, 2010
pp. 63‐72. 2010. Emerald. (Cope)
40) M. Hosseini, Aidy Ali and B. B. Sahari. A review and comparison on some rubber
elasticity models . Journal of Scientific and Industrial Research. ,Vol. 67 No. 7,
pp. 495‐500. 2010. Impact Factor: 0.47. (Thomson ISI)
41) C. W. Chieh, Aidy Ali, A. B. Sanuddin, Reza Afshar. Durability simulation of elastomeric
materials using finite element method (FEM). Pertanika Journal of Science and
Technology. Volume 18 (2) 441‐450. July 2010. (Ebsco).
42) R. S. Sidhu, Aidy Ali, Fatigue Life of Automotive Rubber Jounce Bumper. Institute of
Physic ( IOP) Conference Series Materials Science and Engineering open access journal. V
11, 2010, pp 012008 (Compendex)
43) M. S. A. Samad , Aidy Ali. Simulation work of fatigue Life Prediction of Rubber
Automotive Components Institute of Physic ( IOP) Conference Series Materials Science and
Engineering an open access journal. V 11, 2010, pp 012009, (Compendex)
44) Nurhaniza. M., M.K.A. Ariffin, Aidy Ali, F. Mustapha, Noraini. A. W. Finite Element
Analysis of Composites Materials for Aerospace Applications Institute of Physic ( IOP)
Conference Series Materials Science and Engineering open access journal. V 11, 2010, pp
012010 (Compendex)
45) M.M.Davoodi, S.M. Sapuan, Aidy Ali, D. Ahmad, A. Khalina. Thermoplastic
Toughening in Hybrid Bio‐composite Material for Car Bumper Beam Application Institute
of Physic ( IOP) Conference Series Materials Science and Engineering open access journal.
V 11, 2010, pp 012013 (Compendex)
46) Omar Suliman Zaroog, Aidy Ali, B. B. Sahari and Rizal Zahari, Residual stress relaxation
and surface hardness of 2024‐T351 aluminum alloy, Materials Testing V 52, 9. 2010.pp
632‐639. IF: 0.123 (Thomson ISI)

16
47) Aidy Ali, M. Hosseini. B. B. Sahari. Heat aging effects on tensile properties of
vulcanized natural rubber. International Review of Mechanical Engineering Vol 4 (4) May
2010 p:422‐424 (Scopus).
48) M. M. Davoodi, S. M. Sapuan, D. Ahmad, Aidy Ali and A. Khalina, Mechanical
Properties of hybrid kenaf/ glass reinforced epoxy composite in passengers car bumper
beam. Materials and Design 2010. Vol 31 p: 4927‐4932, 2010. IF: 1.518 (Thomson ISI)
49) Z. N. Ismarrubie, Aidy Ali, T. Satake and M. Sugano.Influence of Microstructures on
Fatigue Damage Mechanisms in Ti‐15‐3 Alloy. Materials and Design Vol 32 p: 1456‐1461.
IF: 1.518. 2011. (Thomson ISI)
50) M. Bernard, A. Khalina, Aidy Ali, R. Janius, M. Faizal, K. S. Hasnah and A.B. Sanuddin.
The effect of processing parameters on the mechanical properties of kenaf fiber plastic
composite . Materials and Design 2011. Vol 32 p: 1039‐1043. IF: 1.518 (Thomson ISI)
51) M. S. A. Samad, Aidy Ali, R. S. Sidhu. Durability of automotive jounce bumper.
Materials and Design 2011. Vol 32 p: 1001‐1005 IF: 1.518 (Thomson ISI)
52) Omar Suliman Zaroog , Aidy Ali and B. B. Sahari. Rizal Zahari. Modeling of residual
stress relaxation of 2024‐T351 aluminum alloy International Journal of Fatigue, Vol 33,
2011 , p:279‐285. IF: 1.602 (Thomson ISI)
53) K. S. Hasnah, A. Khalina, Aidy Ali, M. Bernard, S. Jamaliah, and W. Y. W. M. Zin. Kenaf
performance in PP/EVA/clay biocomposite. Materials Testing, 2011. IF: 0.123 (Thomson
ISI) Inpress
54) Reza Afshar, Aidy Ali, B. B. Sahari and M. Bayat . Auto adjust masses of automotive
structures with desired centre of gravity. Key Engineering Materials . Vol. 462‐463, 2010 ,
p:812‐816, Impact Factor; IF 0.224 (Thomson ISI)
55) K. A. Mohammad, Aidy Ali, A. Oshkour and B. B. Sahari, S. Abdullah. Investigation of
creep fatigue crack propagation in aluminium tube Key Engineering Materials . Vol. 462‐
463, 2011 , p:541‐546, Impact Factor; IF 0.224 (Thomson ISI)
56) M. S. A. Samad, Aidy Ali, and M. K. A. Ariffin, Life prediction of rubber automotive
components using finite element method Key Engineering Materials . Vol. 462‐463, 2011 ,
p:535‐540., Impact Factor; IF 0.224 (Thomson ISI)
57) R. S. Sidhu, Aidy Ali, and M. R. Hassan ,Experimetal determination of fatigue life of
automotive jounce bumper Key Engineering Materials . Vol. 462‐463, 2011 , p: 634‐638,
Impact Factor; IF 0.224 (Thomson ISI)

17
58) Omar Suliman Zaroog , Aidy Ali, B. B. Sahari and Rizal Zahari, Microhardness and
residual stress relaxation of 2024 T351 aluminum alloy Key Engineering Materials .Vol.
462‐463, 2011 , p:343‐348, Impact Factor; IF 0.224 (Thomson ISI)
59) A. F. Golestaneh, Aidy Ali, and M. Bayat. Analytical and numerical investigation of
fatigue crack growth in aluminum alloys Key Engineering Materials . Vol. 462‐463, 2011 ,
p:1050‐1055, Impact Factor; IF 0.224 (Thomson ISI)
60) A. F. Golestaneh, Aidy Ali, and M. Bayat, Experimental and analytical studies of fatigue
crack growth in peened after skimmed friction stir welded joint of 2024‐t351 al alloy Key
Engineering Materials . Vol. 462‐463, 2011 , p:1212‐1217, Impact Factor; IF 0.224
(Thomson ISI)
61) S. A. Ibraheem, Aidy Ali, A. Khalina. Development of Green Insulation Boards From
Kenaf Fibres. Part 1: Development and Characterization of Mechanical Properties Key
Engineering Materials . Vol. 462‐463, 2011 , p:1343‐1348, Impact Factor; IF 0.224
(Thomson ISI)
62) S. A. Ibraheem , Aidy Ali , A. Khalina. Development of Green Insulation Boards From
Kenaf Fibres. Part 2: Characterizations of Thermal and Water Absorption
Key Engineering Materials . Vol. 462‐463, 2011 , p:1331‐1336, Impact Factor; IF 0.224
(Thomson ISI)
63) Omar Suliman Zaroog, Aidy Ali , and B. B. Sahari . Prediction of Residual Stress
Relaxation of Shot Peened 2024‐T351 Aluminum Alloy Part 1. Key Engineering Materials
Vol. 462‐463, 2011 , p:1355‐1360, Impact Factor; IF 0.224 (Thomson ISI)
64) A Omar Suliman Zaroog , Aidy Ali , and B. B. Sahari . Prediction of Residual Stress
Relaxation of Shot Peened 2024‐T351 Aluminum Alloy Part 2. Key Engineering Materials
Vol. 462‐463, 2011 , p:1349‐1354, Impact Factor; IF 0.224 (Thomson ISI)
65) K. S. Hasnah, A. Khalina, Aidy Ali, S. Jamaliah. The Effect of Eva on Composite that
Made of PP Nanoclay. Key Engineering Materials . Vol. 462‐463, 2011 , p:925‐930, Impact
Factor; IF 0.224 (Thomson ISI)
66) M. J. Suriani, Aidy Ali, S. M. Sapuan, and A. Khalina . Non‐destructive Techniques
(NDT) in Composite Materials. Key Engineering Materials . Vol. 462‐463, 2011 , p:918‐924,
67) Omar Suliman Zaroog , Aidy Ali, and B. B. Sahari. Characterization of Shot Peened
2024‐T351 Aluminum Alloy Key Engineering Materials . Vol. 462‐463, 2011 , p:912‐917,

18
68) Zainab Shaker Radif, Aidy Ali. Fracture toughness of Kenaf mat reinforced polyester
composite. Pertanika Journal of Science and Technology. Volume 19 (1) 167‐177, Jan
2011. (Scopus).
69) Zainab Shaker Radif, Aidy Ali, Khalina Abdan. Development of a green combat armor
from rame‐kevlar‐polyester composite. Pertanika Journal of Science and Technology.
Volume 19 (2) August, 2011. (Scopus). Accepted Inpress
70) H. K. Alsultaney, M. K. A. Ariffin, B.T.H.T. Baharudin, Aidy Ali, F. Mustapha.
Development of combinatorial optimisation for cutting tool path strategy . Pertanika
Journal of Science and Technology. Volume 19 (2) August, 2011. (Scopus). Accepted
Inpress
71) A. H. Abdullah, Z. A. Zulkefli, Aidy Ali , A study of acoustics and speech intelligibility
quality of prayer house. International Journal of Automotive and Mechanical Engineering.
2011. Accepted
72) S. A. Ibraheem , Aidy Ali, A. Khalina. Development of green insulation boards from
kenaf fibres and polyurethane . Polymer‐Plastic Technology and Engineering 2010. IF:
0.420 (Thomson ISI) Accepted
73) Aidy Ali, Z. R. Shaker R, A. Khalina. S. M. Sapuan. Development of a green anti ballistic
board from ramie fiber . Polymer‐Plastic Technology and Engineering 2010. IF: 0.420
(Thomson ISI) Accepted
c. Book(s)
No. Name of Author(s) Year
Published
Title Publisher
1 Aidy Ali, Tinia Idaty
Mohd Ghazi, Mohd.
Sapuan Salit
2009
Simulation for engineering
undergraduates
UPM Press
ISBN 978‐967‐
344‐074‐0
2 Aidy Ali 2010 Life extension of aircraft
components by using
surface engineering
Verlag D. Miller,
VDM, Germany
ISBN 978‐3‐639‐
25831‐8
3 Aidy Ali, Reza Afshar 2010 Teach yourself ANSYS in 7
Days
Verlag D. Miller,
VDM, Germany
ISBN 978‐3‐639‐
26534‐7
4 Mohammad Shatar 2009 Pusat Kokurikulum Universiti ZH Publishing

19
Sabran, Aidy Ali, Samir
Muhazzab Amin,
Paramasivam
Muthusamy, Zulhamri
Abdullah, Azali
Mohamed
Putra Malaysia Peneraju
Kecemerlangan Modal Insan,
Strategi dan Perlaksanaan
House
ISBN 978‐967‐
5486‐02‐9
5 Mohammad Shatar
Sabran, Aidy Ali, Samir
Muhazzab Amin,
Paramasivam
Muthusamy, Zulhamri
Abdullah, Azali
Mohamed
2009 7 kemahiran insaniah
pelajar, huraian dan
pengukuran
ZH Publishing
House
ISBN 978‐967‐
5486‐02‐9
6 Zulhamri Abdullah
Mohammad Shatar
Sabran, Samir
Muhazzab Amin
,Paramasivam
Muthusamy, Aidy Ali,
Azali Mohamed
2010 Kemahiran Insaniah
Ekspektasi Majikan
ZH Publishing
House
ISBN 978‐967‐
5486‐05‐0
7 Aidy Ali, Mohammad
Shatar Sabran, Hanafiah
Ayub, Nasaruddin
Abdullah, Samir
Muhazzab Amin,
Paramasivam
Muthusamy, Zulhamri
Abdullah
2010 Perlaksanaan Kokurikulum
Berkredit Komponen Sukan
Global Press
ISBN 978‐967‐
960‐261‐6
8 Paramasivam
Muthusamy,
Mohammad Shatar
Sabran,Aidy Ali, Samir
Muhazzab Amin, ,
Zulhamri Abdullah
Berkredit Komponen Seni
Budaya Jilid I
PST Enterprise
ISBN 978‐967‐
960‐264‐7 (jil1)
9 Paramasivam
Muthusamy,
Mohammad Shatar
Muhazzab Amin, ,
Zulhamri Abdullah
Budaya Jilid II
PST Enterprise
ISBN 978‐967‐
960‐265‐4 (jilII)

20
10 Paramasivam
Muthusamy,
Mohammad Shatar
Muhazzab Amin, ,
Zulhamri Abdullah
Budaya Jilid III
PST Enterprise
ISBN 978‐967‐
960‐266‐1 (jilIII)
d. Chapter(s) in Book
No. Name of Author(s) Year Published Title Publisher
1 M. M. Davoodi, S. M.
Sapuan, Desa Ahmad,
Aidy Ali, Khalina
Abdan
2009
Research on
Natural Fiber
Reinforced
Composites
A review of natural fiber
composite in automotive
industry, in the book of
Research on Natural Fiber
Reinforced Composites
Chapter 15
UPM Press
2 Aidy Ali, Thung Chun
Yun, Z. A. Zulkifle,
Nuraini Abdul Aziz
2009
Simulation for
engineering
undergraduates
Simulation of thick
welded joint, in the book
Simulation for
engineering
undergraduates Chapter
1
UPM Press
Page 1‐16
ISBN 978‐967‐
344‐074‐0
3 Aidy Ali, L. W. Hung,
A. F. Golestaneh, B.
B. Sahari
2009
Simulation for
engineering
undergraduates
Simulation and
experimental work of
climbing safety harness,
in the book Simulation for
engineering
2
UPM Press
Page 17‐29
ISBN 978‐967‐
344‐074‐0
4 A. F. Golestaneh,
Aidy Ali, Z. A. Zulkifle
,S V. Wong, F
Mustapha
2009
Simulation for
engineering
undergraduates
Life prediction of Friction
stir welded joint using
FEM, , in the book
Simulation for
engineering
3
UPM Press
Page 30‐52
ISBN 978‐967‐
344‐074‐0
5 Afshar Reza, Aidy Ali,
B. B. Sahari
2009
Simulation for
engineering
undergraduates
Simulation of auto
generation the centre of
gravity under crush
deformation ,
UPM Press
Page 52‐64
ISBN 978‐967‐
344‐074‐0

21
4
6 Aidy Ali, Mhd Yunin
Hassan, Omar S.
Zaroog
2009
Simulation for
engineering
undergraduates
Designing a friction stir
welding fatigue specimen
using FEM, in the book
Simulation for
engineering
undergraduates, Chapter
5
UPM Press
Page 65‐79
ISBN 978‐967‐
344‐074‐0
7 Aidy Ali, R. S. Sidhu,
M. S. A. Samad, ,.
2010
Trends and
Development
in Automotive
Engineering
Fatigue characteristics of
Automotive jounce
bumper, Chapter.
INTECH
International
ISBN 978‐
9537619‐x‐x
g. Other Presentation (Poster/Product/Exhibition/Showcase)
No. Name of
Writer(s)
Title Name of
Conference/Exhibition
Organiser Place Date
1 Aidy Ali M.
W. Brown
Title
Improving
the fatigue
life of
aircraft
component
s by using
surface
engineering
)
Research Innovation,
Commercialisation
UPM UPM 16‐17
March
2006
2 Aidy Ali M.
W. Brown
Life
prediction
for multiple
cracks in
FSW joints
PRPI Research and
Innovation Exhibition
UPM UPM 29‐31
July2008
3 Aidy Ali ,A.
F
Golestaneh
, F
Mustapha.
S. V Wong
Simulation
of fatigue
life in
friction stir
welded
joints
PRPI Research and
Innovation Exhibition
UPM UPM 29‐31
July2008

22
I. Research activities
a. Research Grants
No. Title Role (Main/Co‐
researcher)
Sponsor/Gran
t and Amount
(RM)
Period
(year)
Status
(Complete
d/Ongoing)
1 Simulation of Fatigue
Crack Propagation In
2024‐T351 Aluminium
Aircraft Friction Stir
Welding
Main Science Fund
MOSTI
RM 75,494
2006‐
2008
Completed
2 Improving the fatigue
life of fusion welding
by using surface
engineering
Main FGRS Higher
Educations
RM 80,000
2006‐
2008
Completed
3 Improving the
structural and
thermal efficiencies
of rotating gear disks
using functionally
graded material
(FGM)
Main FGRS Higher
Educations
RM 97,500
2008‐
2010
Completed
4 A Problems solution
for the night cooling
in solar water heaters
by using thermal
stratification
Main Science Fund
MOSTI RM
137,716
2006‐
2008
Completed
5 Life prediction and
extension of heavy
duty pipe for oil and
gas industries
Main RUGS UPM
Research Uni
RM 95,000
2009‐
2011
Ongoing
6 Detoxification of
water and removal of
pollutants in
hazardous effluent
using oscillatory flow
mixing
Co‐researcher Science Fund
MOSTI RM
206,000
2006‐
2008
Completed
7 The impact of indoor
air quality on
Co‐researcher Science Fund
MOSTI
2006‐
2008
Completed

23
longevity of building RM 202,693
8 Computer aided
Material Selection for
Components made
from composite using
AHP.
Co‐researcher RUGS UPM
RM 133,000
2007‐
2009
Completed
9 Development of
Combinatorial
Optimisation for
Cutting tool path
strategy
RM 70,000
2007‐
2009
Completed
10 Cutting Tool Path
Optimisation Using
Evolutionary
Algorithm
Co‐researcher FGRS Higher
Educations
RM 100,000
2007‐
2009
Completed
11 Internal Surface Flaws
Reconstruction of
Composite Materials
for Product
Inspection in
Robotized
Manufacturing Cells
Educations
RM 90,000
2007‐
2009
Completed
12 Modelling of Residual
Stress Relaxation of
Ultrasonic Peened
2024‐T351 Aluminium
Aircraft Materials.
Educations
RM 100,000
2007‐
2009
Completed
13 Determination of
Malaysian Behaviour
on Abuse of Energy at
a Teaching
Institution.
Educations
RM 50,000
2007‐
2009
Completed
14 Investigating and
Response of a single
acoustically driven
Bubble near a rigid
surface in polymer gel
Educations
RM 104,500
2007‐
2009
Completed
15 Simple durability
programming,
integrate with LSDYNA
post processing
Co‐researcher TECHNOFUND
MOSTI
RM
780,000.00
2009‐
2011
Ongoing
16 Microstructures effect
of fatigue damage
RM 30,000
2009‐
2011
Ongoing

24
mechanism
in polycrystalline
materials
17 Finite element
modeling of cohesive
fracture in particulate
materials.
RM 30,000
2009‐
2011
Ongoing
18 Investigation of
interactions between
lead free solders
and 90Pb‐10Sn on
bare copper substrate
for high
temperature usage in
electronic packaging
RM 29,000
2009‐
2011
Ongoing
J. Consultation activities
a. Consultation Project(s)
No. Name of
Consultant(s)
Name of
Project/Program
Sponsor Amount
(RM)
Year Status
1 Aidy Ali, Ng.
K. Hean,
Wildan Ilyas
Muhammad
Ghazali
Characterisation
of genuine and
ageing of PC PET
plastic for
electrical
applications
Motorola
Technology
Sdn. Bhd.
2,625 2008 Completed
2 Aidy Ali, Eris
Elianddy
Supeni,
Wildan Ilyas
Muhammad
Ghazali,
Mohd.
Affandi
Mohammad
Characterisation
of mileage for
with and without
super fuel saver
application
product for
petrol
Hilgen
Corporation
Sdn. Bhd.
3 Nawal
Aswan, Aidy
Ali, Barkawi
Sahari
Kajian Forensik
Barang Kes
Bahagian
kejuruteraan
forensic,
jabatan

25
keselamatan
dan
kesihatan
pekerjaan
malaysia
b. Consultation Report(s)
No. Name of
Consultant(s)
Title of Report Sponsor Date Submitted
1 Aidy Ali, Ng. K.
Hean, Wildan Ilyas
Muhammad Ghazali
The effect of ageing on
plastic materials
Motorola
Technology Sdn.
Bhd.
15.05.2008
2 Aidy Ali, Eris
Elianddy Supeni,
Wildan Ilyas
Muhammad
Ghazali, Mohd.
Affandi Mohammad
Characterisation of mileage
for with and without super
fuel saver application
product for petrol
Hilgen
Corporation
Sdn. Bhd.
18.07.2008
3 Nawal Aswan, Aidy
Ali
Kajian Barang Kes Jabatan
Keselamatan dan Kesihatan
Pekerjaan
Bahagian
kejuruteraan
forensic,
jabatan
keselamatan
dan kesihatan
pekerjaan
malaysia
15.09.2009
K. Extension and other public services
ACTING REFEREE FOR
FEOFS 2010, 8TH
International of Fracture and Strength of Solids, 2010
ASM, Journal of Materials Engineering and Performance , 2009
ASME, Conference Design engineering technical conference and computer and information in
engineering conference IDETC09/CIE09, 2009
AMPT 2009, Advances in Materials and Processing Technologies ,2009
CARE 2009, Conference on Alternative and Renewable Energy, 2009

26
DSTC 2009, Defense and Security Technology Conference , 2009
IJAME 2009, International Journal of Automotive and Mechanical Engineering 2009, 2010
NCON‐PGR 2009, National Conference on Post Graduate Research ,2009
NSPM 2009, National Symposium of Polymeric Materials, 2009
ASME, Journal of Materials Science and Technology 2007
FEIIC, Seminar on Engineering and Technology (SET 2006), 4‐5th September 2006
WEC, World Engineering Congress Penang, August 2007
FEIIC, IJET, International Journal in Engineering and Technology 2006 ,2007, 2008,
IEM, Journal of Institute of Engineer Malaysia 2008
Evaluator for Diploma programmed of Metallurgy Uni Malaysia Perlis UNIMAP 2008
PJST, Pertanika Journal Science and Technology, UPM
JFAE, Journal of Food, Agriculture and Environment
PGRC'09, Post Graduate Research Conference 2009, UMP
IJMME, International Journal of Mechanical and Materials Engineering 2010, UM
CAME, Conference on Aerospace and Mechanical Engineering, 2010
CMTM, Conference on Manufacturing Technology and Management, 2010
IJEST, International Journal of Engineering, Science and Technology, 2010
IJVSS, International Journal of Vehicle Structures & System, 2010
Professional services
1 Evaluator Diploma Program Diploma Program mechanical and materials engineering

27
JPA Unimap, 2009
2
Evaluator Book, Vehicle and
Chassis Design
November 2009. Book written by university of PETRONAS
Malaysia
3 Examiner Thesis MSC
Development of Fibre Reinforced Epoxy Composite Energy
Absorber for Automotive Bumper System( Majid davoodi
makinejad GS16187) 2007
Ranking of Total quality managements critical techniques in
automotive industry (Amir azizi GS15606) 2007
Finite element simulation and analysis of the human tibia (
Norfadhillah mohamed azmin) 2007
Parametric optimization of electrical discharge turning (EDT)
process using taguchi method (Pouria matoorian GS16823)
2007
The effect of sacrificial anodes introduction towards the
strength of steel structures (Md Ridzuan Bin Md Hamid
GS17112) 2007
Influence of air exchange effectiveness on thermal comfort
(Roonak daghigh) GS16824 2008
Electrical discharge machining of berillyum copper alloys
using design of experiment approach (Shaik mohamed
mohamaed yusoff) GS15842 2008
A study of active noise control (ANC) technique application in
air conditioning system (Aloysius dcruz a’l joachim decruz)
GS14452 2008
Intersecting and Non Intersecting Volumetric Feature
Recognition (Mohammad Hayasi) GS15719 2008
Mechanical properties of untreated and alkaline treated
kenaf and ramie fabric reinforce epoxy composites (Khairul
Azmi Bin Md. Rezali) GS 2009
Mechanical properties of oil palm fibre thermoset
composites (Mohd Zuhri Mohd Yusof) GS19244 2009
Integration of a improved grey based method and fuzzy multi
objective model for supplier selection and order allocation
(Omid Jadidi) GS 19576 2009
Environmental comfort parameters and energy efficiency
potentials of enclosed transitional space in tropical buildings
(Kwong Qi Je) GS20404 2009
Design, Fabricate and analyse of ceramic foam filter for
filtration of aluminum alloy (Egsaanreza Bahherian) GS
19723 2009
17 Examiner Thesis MSC Solidification analysis of metal matrix composite aluminium

28
11.8% silicon alloy reinforced with titanium carbide
particulates (Nanang Fatchurrohman) (GS 19360) 2009
Design and development of compression moulding machine
for long kenaf fibre reinforced plastic composite (Bernard
Anak Maringgal ) GS 19299 2010
Predicting Behaviour of the folw around horizontal axis wind
turbine blade (Amir Pakravan ) GS 18135 2009
Finite Element Crash of natural gas vehicle platform
(Muhammad Mujahid Azni (GS13086) 2009
Visualing supply chanin using social network analysis in
project based industry ( Maryamalsadat Vafa) GS 18176 2009
Development of An Integrated Model For Production
Planning and Cell Formation Problem in Cellular
Manufacturing Systems ( Reza Raminfar ) GS 19818 2009
Vibration Analysis of Simply Supported Beam Type Vibration
Absorber (Mothanna Yasen Abd ) GS 20189 2009
24
External Examiner Thesis
MSC, UNITEN
An alternative method for predicting oxide scale growth in
superheater and reheater tubes (Alfa Khinani ) SM 20513
2009
Thermoelastic analysis of functionally graded brake disk
subjected to contact loads (Mohammad Mehdi
Shahzamanian) GS 22026 2010
Development of an external balance device of calibration
and validation for wind tunnel testing (Hafizal Abu Bakar) GS
12123 2011
A tracked prime mover for in field collection and
transportation of oil palm ffb on low bearing capacity peat
terrain ( Mohammad Hadi Ghassemi) GS 18315 2011
28 Examiner Thesis PhD
Experimental and Finite element simulation of an innovative
crashworthy composite structure (Siavash Talebi Taher) GS
16821 2009
Pembangunan standard pengukuran kemahiran
employability alat ukur tahap kemahiran employability
individu dalam memenuhi kehendak majikan industry
pembuatan (Mohd Sattar Rasul) GS 167220 2009
Early decision making using analytical hierarchy process at
the conceptual design stage under concurrent engineering
environment (Hambali Arep @Arep ) GS 18371 2009
A novel path prediction strategy for robust wireless tracking
of intelligent travelers (Omid Reza Esmaeili Motlagh)
GS15138 2009
32 Examiner Thesis PhD Design and stress analysis at pressure vessel using finite

29
element analysis (FEA) (Lim Hui Wah) GS14095 2009
Production of Nano Alpha alumina through the sol gel
method and its application on polypropylene. (Fatemeh
Mirjalili) GS 18311 2010
Design and analysis of HIP implant in bone resorption
environment( Solehuddin Shuib) GS 15723 2010
Developing a fuzzy loss‐based process capability index (
Mohammad Abdolshah ) GS 20581 2010
Development of crack meander protocol for the fatigue
resistance of stone mastic asphalt mixture using cellulose
fibers (Sirous Radkeya) GS 18840 2010
Thermomechanical properties of sugarcane bagassefilled
Poly Vinyl Chloride Composites (Riza Wirawan) GS20382
2010
38
Chairman Examiner Thesis
MSC
Feature recognition algorithm using pattern matching
technique for prismatic part ( Syarlina Syazliza Binti Saaid
GS13114) 2009
39
MSC
Raja Nor Firdaus Kashfi Raja Othman (GS 17730 ) 2009
40
MSC
Optimal Maintenance Scheduling for Multi component e‐
manufacturing systems, Ali Arab (GS20028) 2009
41
MSC
Mechanical properties of wowen sugar palm fibre reinforced
unsaturated polester composites , Mohammad Ridzwan
(GS22580) 2009
42
MSC
Enhancing of welding properties by induce vibration and
study the effect of welding parameters. Alaa Raad Hussein
(GS22241) 2010
43
MSC
Effect of the composition of natural gas‐hyrogen mixture on
the CNG engine performance and exhaust emissions.
Asmawi (GS22335) 2010
44
MSC
Properties of laminated kenaf on PP/EVA/CLAY
nanocomposites. Siti Hasnah Kamarudin( GS19191) 2011
45
MSC
Computational fluid dynamic analysis of knock onset in
diesel fuel engine. Mohammadmahdi Ghiji (GS22648) 2011
46
PhD
Statistical monitoring of supply chain performance in a
quality management system environment for the
automotive industry . Soroush Avakh Darestani (GS 16188)
2010
47
PhD
Development of load shuffling and travel time models for
miniload automated storage and retrieval system with an
open rack structure ( Mohammadreza Vasili ) GS 18909 2011
48 Examiner Thesis Bachelor Analysis of a unimorph piezoelectric actuator used to

30
vibrationally excite a sketel structure at its resonance
frequency ( Ng hoong liang) 114758 2007
49 Examiner Thesis Bachelor
Experimental determination of force to assemble spigot and
socket stell pipe joint fitted with lip seal elastomer (Ler hui
min) 114992 2007
Design and fabricate assistive tool for replacing vehicles
wheels ( WONG HON FEI) 115990 2007
Design and fabricate umbrella for effective use (EDMUND
ANAK JAMES) 119547 2007
Numerical analysis of front wheel tyre assembly behaviour
under impact loading (LEONG HAO QIANG) 115989 2007
Energy harvesting from human body motions (LAU MUN
YUN) 114700 2007
Acoustic characterization of a multi purpose hall (ABDUL
HAKIM ABDULLAH) 123951 2008
Acoustic characterization of an auditorium faculty of
engineering UPM (KHOR WAH YOKE) 123773 2008
Design of an all terrain wheelchair for disabled in Malaysia
(NAZRUL NIZAM KASIM) 96538 2008
Elastic plastic analysis of pressurized tubular joints subjected
to cyclic loading using finite element (SHAHRUL NIZAM
MOHAMMAD) 126596, 2008
Experiment determination of joining method for increased
capacity of spigot and socket steel pipe joint fitted with lip
seal elastomer (MOHAMAD FAISAL BADRY) 123952, 2008
Experimental determination of natural frequencies of mode
shape of pressurized tube (ARAFAT HASMANIZAR CHE
AHMAD) 126581, 2008
Mechanical properties of the joint of motorcycle front fork
(LIM YEE TAT) 126903, 2008
Fractographic analysis of fractured motorcycle wheel hub
using scanning electron microscope SEM (KAK D WING)
123952, 2008
Visual signal safety brake light design (micheal devanesan)
128893, 2009
Ratchetting behavior of filament wound vessel (Teoh Hock
Lye) 130552
Experiment determination of natural frequencies and mode
shape of pressurized tubular joints (Koo Zao Hong) 130541
Modelling of Shape memory alloy (Kawthar bt Roslan)
131854
66 Examiner Thesis Bachelor Modelling of SMA for inlet guide vane in aeroengine (Mohd.

31
Nasrisyam b Asri) 133183
Design SMA actuator for yatch stabilizer (Noor Haslina Bt
Azani
Breaking of cryogenic processed of fruits by using vibration
(Kaw Wee Tak) 130577
Identification of corrosion on steel plate and hollow tube
using vibration (Seng Teck Cheng) 130856
L. Involvement in professional association/organization/body
No. Name of
Association/Organization/Body
Role (President/Secretary/Committee
Member/Ordinary Member
1 Member of European Structural
Integrity Society (MESIS)
Member
2 Board of Engineer Malaysia Member
3 Society of Fracture Asia, Far East
Oceanic Society (FEOS)
Member, Directors
M. Involvement in student development
No. Name of
Program
Organiser Role (Facilitator/Speaker/Others) Date
1 Bachelor
Mechanical
Engineering
Faculty of
Engineering
Advisor 2006 to
date
2 AutoCAD for
engineering
undergarduates
Faculty of
engineering,
Mechanical and
Manufacturing
Engineering Club
(M2EC)
Speaker and Demonstrator 22‐25
January
2007
3 Starting School UPM Co curriculum
centre
Speaker 12‐13 July
2008
4 Finishing School UPM Co curriculum
centre
Speaker 16‐17
August
2008
centre
Speaker 21‐22
February
2009
6 Finishing School UPM Co curriculum Speaker 7‐8 Mac

32
centre 2009
7 ANSYS ABAQUS
TRAININGS
Faculty of
Engineering
Speaker June 2009
8 Starting School UPM Co curriculum
centre
2009
centre
2009
10 How to win
research grant
and soft skill in
publications
University Tun
Hussein On
Malaysia
Speaker December
2009
11 Finding a career
path
UiTM Speaker July 2008
PATENT
(Title of Invention, Role, Type of Intellectual Property Rights, Registration No., Year)
1. A method of processing high velocity impact hybrid combat armor materials from
ramie fibre by Aidy Ali, 2) Khalina Abdan, 3) Zainab Shaker Radif , 2010, Patent
filling, PI 2010005286
2. A method of developing green insulation boards from kenaf fibers by Aidy Ali, 2)
Khalina Abdan, 3) Sameer Adnan Ibraheem 2010, Patent filling, refer ICC UPM
3. A method of fabrication process of functionally graded materials (fgm) disks by
Aidy Ali, 2) A. B. Sanuddin 2010, Patent filling, refer ICC UPM

AIDY S RESEARCH CV

Recommended

Recommended

More Related Content

Similar to AIDY S RESEARCH CV

Similar to AIDY S RESEARCH CV (20)

More from Linda Garcia

More from Linda Garcia (20)

Recently uploaded

Recently uploaded (20)

AIDY S RESEARCH CV