1. Integrated Restoration specializes
in and is an experienced
SMOKE & FIRE
RESTORATION
general contractor.
RESIDENTIAL
COMMERCIAL
INDUSTRIAL

2. Residential Puff Back.
The source of the oily soot is a fuel oil furnace puff
back. All surfaces throughout the home were coated.
Cleaning required extensive use of appropriate
alkaline cleaner / degreasers.

3. After detail cleaning the entire home was painted.
Better than before for this home in Mantua, Ohio.

4. Residential Fire Design/Build
Restoration involved an 1800’s post and beam home in Dover, Ohio.
Brought in as a consultant, Integrated Restoration was ultimately hired by
the homeowner who was pleased with the design alterations replacing an
attic with two bedrooms and a bath.

5. Residential Fire
Restoration involved a whole home interior gut and rebuild. This is the
kitchen before and after.

6. Commercial Multi Tenant
Apartment and Pub Fire restoration
included 12 apartment units and a Restaurant –
Lounge.

7. This particular unit’s repair included a layout
redesign, yielding additional rental dollars for the
owner.

8. This is one of the gutted kitchen units. Cabinet and
counter space were added along with a microwave
for contemporary look and function.

9. Employing Odor Control Technology;
surfactants, pairing agents and Hydroxyl
technology, the common hall smoke and fire damage
was immediately deodorized, cleaned and sealed.

10. Temporary doors were installed on two occupied
floors. This isolated the devastated units beyond...

11. from the occupied units that required only general
cleaning and painting.

12. The tenants could remain in their units while the
halls were finished and the heavily damaged units
were completely restored. This enabled the owner to
maintain his tenant base.

13. The immediate cleaning of the lounge, Integrated
Restoration’s installation of a Hydroxyl Generator,
HEPA air scrubber, Dehumidifier and high CFM air
movers enabled the lounge to be cleaned, dried out,
and remain open for the St Patrick’s Day business.

14. Commercial Service Station
fire restoration. An automobile in one bay caught fire.
It ignited the vehicle in the adjoining bay along with
the interior and part of the exterior of the structure.

15. Structural repairs, ceiling replacement, cleaning and
painting were completed in three weeks. Integrated
Restoration’s processes and efficiency saved the
owner downtime and the carrier significant exposure
in ALE expense.

16. Industrial Plant Fire
resulted in the total destruction of one portion of the
facility housing high tech CNC equipment. A
second building required major restoration.

17. Called out for Emergency services, Integrated
Restoration provided temporary power, heat, and
lighting. We immediately instituted a necessary
structural dry out. We also installed a temporary
security door separating the two affected structures.

18. The Integrated Restoration project entailed the demo
and complete rebuild of the North Building of the
manufacturing complex from footers up.

19. The reconstruction entailed shot blasting the existing
concrete floors as prep for the restoration of the
epoxy floor coating that was in both damaged
structures.

20. From the manufacturer of the new building siding,
we received the material and color match. The paint
was matched and applied to the remaining structure.
At project’s culmination, the entire “new”
manufacturing facility was uniform in color and
profile.

21. Concurrent with the North building demo and
rebuild, Integrated Restoration crews were restoring
the South building shop and management offices.

22. After rebuild, cleaning, prime and painting,
mechanicals were brought up to code. Machinery
was installed. The manufacturing company was back
up and running in their new facility.