Hemant Kadam is seeking a challenging role in vehicle design and development with a reputable organization. He has over 6 years of experience in automotive design, including 4.7 years designing clutches and braking systems. Currently, he works as a design engineer at Tata Motors developing new commercial vehicles. Some of his responsibilities include concept design, packaging of vehicle components, and interacting with suppliers. Kadam is proficient in CAD tools like ProE and has expertise in vehicle integration, actuation systems, and creating technical documents. He holds a Bachelor's degree in Automobile Engineering.
1. HEMANT TANAJI KADAM
Email: - hem_kadam@hotmail.com
Mob. No. : - 9970822207
9404329810
CAREER OBJECTIVE:
Seek challenging assignments in Design & Development (Vehicle Integration) domain with
a growth-oriented organization of high repute and emerging as Team leader
EXPERIENCE SUMMARY:
6.5 years experience in Automotive Field (Design and Development)
4.7 years of experience in Clutch and Brake actuation.
Currently working as onsite design engineer (Design & Development) in TATA Motors Ltd for Ultra Program
(Code name: Y1 - New Gen LCV & HCV-Trucks & Buses).
1.6 years of experience in Design & Development of MONOCOQUE Rear Engine Bus.
Gathered hands-on experience in new product development in Vehicle integration, Packaging of Chassis
Aggregates, Design of Controls.
PROFESSIONAL EXPERIENCE
A B Cad Engineers Pvt. Ltd., Pune
Designation: - Senior Design Engineer
(Onsite Design Engineer. In TATA MOTORS)
Pro/E Wildfire 2.0,5.0 & Pro e CreO 2
May 2010 to till date
PROJECTS
Foot pedal controls:
• Concept, design and packaging of pedal control (Clutch, Brake and Accelerator pedal) for all variants in the
project.
• Communizing maximum parts for multiple part reduction and cost reduction.
• Preparing drawings for same and Bill of Material for all variants of the project.
• Interacting and coordinating with supplier to freeze design and get the part as per the defined timeline.
• Basic design calculations for Controls.
• Effective incorporation of bench-marking, lessons learnt, customer requirements, Field problems, build
concerns etc. from previous project in the current design.
• Interact with IDT & ODT team for component validation
• Analysis of the bracket and assembly done on user level on Pro-Mechanica Module for initial results for
improving design.
Clutch and Brake Actuation system:
• Concept, design and packaging Clutch and brake actuation system for all variants in the project.
• Clutch actuation system:
1) Air assist hydraulic clutch actuation system
2) Vacuum assist clutch actuation system
3) Concentric slave cylinder
2. • Brake Actuation system:
1) Pneumatic Brake system
2) Vacuum assist brake actuation system
3) DAOH brake system
• CSC (Concentric Slave Cylinder) calculations & tolerance stack up.
• Design was improved and made suitable to communize single assembly across all variants.
• Design reviews with cross-functional teams for Interface & performance issues.
• Coordinating vendor/supplier for design freeze & deliver in define timeline.
• Preparation of process documents like Technical Specifications, BOM, DFMEA, DFM, DFA and DFS for
Controls.
• Preparation of DVP and Build control plans with the Testing team.
• DMU sign off & release of BOM in PLM cycle for action of cross functional agencies
• Working on Cost Reduction and weight reduction proposals.
• Design for manufacturability, knowledge of GD&T application.
• Hands on PLM Team center
Areas of Expertise/Exposure
• Knowledge of desired domain: Vehicle Control actuation system.
• In-depth Knowledge of Pro-E Wildfire 5.0 - Part Design, Drafting, Assembly, Sheet metal, Pro-Piping.
• Knowledge of Geometric dimensioning and Tolerance (GD&T).
• Vehicle Packaging and integration.
• Familiar with Automotive Indian Standard.
• Ability to make DFMEA, DFA, DFM and DFS document
• Experience of concept to production of MONOCOQUE rear engine bus
• Root Cause Analysis
Professional Achievements:
1) Design, Development and packaging of CSC (Concentric Slave Cylinder) against Slave Cylinder & Cross shaft
arrangement, 60% weight reduction & cost reduction, with improved performance.
2) Clutch Pedal effort reduction by implementing Vacuum assisted CMC over straight hydraulics.
CORONA BUS MANUFACTURERS PVT. LTD. PUNE
October 2008 - May 2010
Design Engineer – Vehicle Integration and Mechanism
Pro/E Wildfire 2.0 & Auto CAD 2007
• Responsible for complete mechanism product design in Cad (Pro e WF2/WF5) including tolerance studies,
packaging studies.
• Responsible for engineering deliverables, including product design, drawings and checking, product
specification.
• Ensure that prototype samples meet appearance and functional performance standards and ensure
completion of appropriate product validation testing.
• Create drawings and apply GD&T.
• Generate BOM's, maintain open issues lists.
3. EDUCATIONAL QUALIFICATION
Bachelor's Degree in Automobile Engineering
First Class (64.83%) (2008)
Shivaji University, Kolhapur Maharashtra.
Institution: Rajarambapu Institute Of Technology, Rajaramnagar. Sangli
• Completed Certificate course in Pro e WF2 from Apollo CAD/CAM/CAE Centre Pune.
• Completed Certificate course in CATIA R12.
• Undergone certificate training course in PLM Team center
COMPUTER PROFICIENCIES
• Pro/E Wildfire 2.0 & 5.0 (CreO)
• Auto CAD 2007
• PLM Team centre
• Team centre Vis Mock-up
• MS Office
PERSONAL INFORMATION
Date: - Signature
Place: - Pune Hemant Tanaji Kadam
Name : Hemant Tanaji Kadam
Address : Permanent :- A/P- 92 SONAI Gajanan Housing Society (west) Vidyanagar Tal-
Karad Dist.- Satara Pin-415110
Present :- A/P Flat No. 403 Mangal Bhairav B-18 Nanded City, Singhgad road,
Pune 411041
Telephone ( : Mobile: +91-9970822207 / 9404329810
Email ID hem_kadam@hotmail.com, hemkadam85@gmail.com
Date of Birth : 6th
February 1985
Sex : Male
Marital Status : Unmarried