Css lesson (Basic Concept of Computer)
•Download as PPTX, PDF•
0 likes•25 views
The document describes the three main units of a computer system: the input unit which allows users to enter data and programs for processing, the storage unit which stores data and instructions before and after processing, and the output unit which stores and outputs the results produced by the computer after processing.
Report
Share
Report
Share
Recommended
Central processing unit
The CPU has two main parts: the control unit (CU) which controls all hardware and software operations and issues commands, and the arithmetic logic unit (ALU) which performs processing and arithmetic operations. The CU and ALU communicate via data and control buses, with the data bus transferring data and the control bus sending signals from the CU to other units.
BLOCK DIAGRAM OF COMPUTER
The document provides a block diagram of the basic components of a computer system. It describes the input unit, which receives data and instructions through devices like a keyboard, mouse, or scanner. The central processing unit, including the arithmetic logic unit and control unit, performs all calculations and controls the other units. The output unit provides the results of computations to the outside world through monitors, printers, or speakers. The storage unit holds data and instructions using memory and secondary storage devices.
Co module1a introdctnaddressingmodes
The document provides an overview of basic computer organization topics including:
1. The basic structure of computers including functional units like CPU, memory, I/O devices and bus structures.
2. Computer types ranging from personal computers to supercomputers.
3. Number representation and arithmetic operations in computers like addition, subtraction using binary numbers.
4. Machine instructions, programs, and the fetch-decode-execute cycle the CPU follows to process instructions.
Block structure
The document summarizes the main components and block structure of a computer system. It outlines the input unit which reads data and programs into the computer. It describes the primary and secondary memory units for temporary and permanent storage. The arithmetic logic unit performs arithmetic and logical operations on data as instructed. The control unit manages the movement of data and instructions between memory and the central processing unit which executes stored programs. The output unit delivers results to the user and allows machine to human communication.
Building Block Diagram of Computer | Process of CPU | Input unit | Processing...
This document describes the basic building blocks of a computer. It outlines the three main units: the input unit, processing unit, and output unit. The input unit receives and converts data for the computer to understand through devices like keyboards and mice. The processing unit is the brain of the computer and includes the CPU, memory, and arithmetic logic unit to store and process data. The output unit provides results to the user through monitors, printers, and speakers.
PROGRAMMABLE LOGIC CONTROLLER
This document provides an overview of programmable logic controllers (PLCs). It discusses that a PLC uses a programmable memory to store instructions to implement logic and control machines. A PLC consists of a central processing unit, memory, and input/output processing devices. The central processing unit contains an arithmetic logic unit and control unit to perform operations. Memory in a PLC includes random access memory to store the operating system and programs in use, and read only memory to store essential boot up instructions. Input/output processing devices provide an interface between the PLC and external devices like sensors and motors to input and output signals.
Embedded systems
Embedded system is a combination of computer hardware and software.It may or not be programmable, depending on the application.technology development and use of an internet of things to upgrade to next version of embedded systems.
Computer programming1
This document discusses the history of computers through their generations of development. It begins by defining a computer and its basic components like the CPU, memory, and input/output devices. It then outlines the four main generations of computers, describing the underlying technologies used and examples for each generation from vacuum tubes to integrated circuits to microprocessors. The generations progressed from machine-dependent to machine-independent languages and from bulky to more compact sizes. It concludes by mentioning a potential 5th generation involving artificial intelligence and parallel processing.
Recommended
Central processing unit
The CPU has two main parts: the control unit (CU) which controls all hardware and software operations and issues commands, and the arithmetic logic unit (ALU) which performs processing and arithmetic operations. The CU and ALU communicate via data and control buses, with the data bus transferring data and the control bus sending signals from the CU to other units.
BLOCK DIAGRAM OF COMPUTER
The document provides a block diagram of the basic components of a computer system. It describes the input unit, which receives data and instructions through devices like a keyboard, mouse, or scanner. The central processing unit, including the arithmetic logic unit and control unit, performs all calculations and controls the other units. The output unit provides the results of computations to the outside world through monitors, printers, or speakers. The storage unit holds data and instructions using memory and secondary storage devices.
Co module1a introdctnaddressingmodes
The document provides an overview of basic computer organization topics including:
1. The basic structure of computers including functional units like CPU, memory, I/O devices and bus structures.
2. Computer types ranging from personal computers to supercomputers.
3. Number representation and arithmetic operations in computers like addition, subtraction using binary numbers.
4. Machine instructions, programs, and the fetch-decode-execute cycle the CPU follows to process instructions.
Block structure
The document summarizes the main components and block structure of a computer system. It outlines the input unit which reads data and programs into the computer. It describes the primary and secondary memory units for temporary and permanent storage. The arithmetic logic unit performs arithmetic and logical operations on data as instructed. The control unit manages the movement of data and instructions between memory and the central processing unit which executes stored programs. The output unit delivers results to the user and allows machine to human communication.
Building Block Diagram of Computer | Process of CPU | Input unit | Processing...
This document describes the basic building blocks of a computer. It outlines the three main units: the input unit, processing unit, and output unit. The input unit receives and converts data for the computer to understand through devices like keyboards and mice. The processing unit is the brain of the computer and includes the CPU, memory, and arithmetic logic unit to store and process data. The output unit provides results to the user through monitors, printers, and speakers.
PROGRAMMABLE LOGIC CONTROLLER
This document provides an overview of programmable logic controllers (PLCs). It discusses that a PLC uses a programmable memory to store instructions to implement logic and control machines. A PLC consists of a central processing unit, memory, and input/output processing devices. The central processing unit contains an arithmetic logic unit and control unit to perform operations. Memory in a PLC includes random access memory to store the operating system and programs in use, and read only memory to store essential boot up instructions. Input/output processing devices provide an interface between the PLC and external devices like sensors and motors to input and output signals.
Embedded systems
Embedded system is a combination of computer hardware and software.It may or not be programmable, depending on the application.technology development and use of an internet of things to upgrade to next version of embedded systems.
Computer programming1
This document discusses the history of computers through their generations of development. It begins by defining a computer and its basic components like the CPU, memory, and input/output devices. It then outlines the four main generations of computers, describing the underlying technologies used and examples for each generation from vacuum tubes to integrated circuits to microprocessors. The generations progressed from machine-dependent to machine-independent languages and from bulky to more compact sizes. It concludes by mentioning a potential 5th generation involving artificial intelligence and parallel processing.
Computer fundamental mba
A computer uses both hardware and software to function, with the operating system managing resources and providing an interface between the user and hardware. Hardware includes the physical and tangible parts of a computer while software consists of programs and instructions. There are various types of computers classified by size from micro to mainframe, and operating systems can be single-user or multi-user depending on the number of simultaneous users supported.
Class 5 computer day 1
The document discusses the basic components of a computer including the keyboard and mouse as input devices, the monitor as the output display, and the system unit which houses the internal computer components and processes data according to programmed instructions. It notes that keyboards are used to input data and instructions, mice are pointing devices with buttons, monitors visually output processed results, and the system unit collectively refers to the parts inside the computer case.
Brief introduction about microcontroller and its uses
Express Technologies is a one-stop solution to accomplish your needs. They are one of the leading companies which deal in top-quality electronic components like Rabbit Semiconductor Microcontroller, resistors, relays, etc.
Block diagram of a computer
The document provides a block diagram and overview of the main components of a computer system. It describes the input unit which receives data and instructions and converts them to a format the computer can understand. The output unit accepts results from the computer and converts them to a human readable format. The central processing unit, or CPU, contains the control unit and arithmetic logic unit which perform processing and control other units. The CPU performs all calculations and controls data flow. Main memory and secondary storage hold data, instructions, and results.
Chs demo
1. The document discusses the basic data processing cycle in a computer system, which involves input, processing, and output units.
2. The central processing unit (CPU) is the most important part and directs all processing, containing an arithmetic logic unit, control unit, and main memory.
3. The two main types of memory are random access memory (RAM), which is temporary, and read-only memory (ROM), which permanently stores basic startup programs.
Computer Fundamentals.
What is a Computer? This slide is for basic and beginner. who want to learn the computer. The Five Basic Operations of a Computer System. Basic Computer Organization, Two Types of Storage Data Processing Chart Two types of Number Systems ane in this slide.all are basic information of computer .how nay types of storage of computer .
Microcontroller
A microcontroller is a small computer on a single integrated circuit chip that contains a CPU, memory, and input/output peripherals. It works like a computer but without an operating system and can be programmed to control machinery, appliances, and other devices. Microcontrollers have been used since the 1970s and examples include the Intel 8248 and those found in devices like Arduino boards and automobiles due to their abilities to save space and time in hardware and software applications.
I tf
IT refers to technologies that allow users to record, store, process, transmit, and receive information. A computer takes data as input, transforms it according to stored instructions, and outputs the processed information. The central processing unit (CPU) controls and manipulates data in a computer's memory, arithmetic logic unit (ALU), and control unit. The control unit obtains and interprets instructions to notify other components, while the ALU performs logical and arithmetic operations. Memory stores programs and data during processing in volatile, randomly accessible locations. Input and output units convert and display data. Secondary storage provides long-term, non-volatile data storage outside the CPU.
Embedded Systems
An embedded system is a combination of hardware and software that performs a dedicated function within a larger mechanical or electrical system. Embedded systems are designed to respond to events in real-time and operate with limited resources. They are used across many industries in applications like automotive systems, industrial controls, medical devices, office equipment, and more.
Chapter 1
The document discusses programmable logic controllers (PLCs). It begins by explaining the basic principles of a control system, including inputs, a processor, and outputs. It then provides a history of PLC development from the 1960s to present. The main components of a PLC system are described, including the power supply, input/output modules, processor, and programming device. PLCs were created to offer programmable control like relay logic systems and are now widely used in industry.
Block diagram by vasant
John von Neumann was a Hungarian-American mathematician who helped develop the block diagram model of a computer. The block diagram shows the major components of a computer system including input and output units to receive and display data, a central processing unit (CPU) to perform calculations and control operations, and a storage unit to hold data and instructions. The CPU consists of an arithmetic logical unit to perform calculations and a control unit to direct the system. The block diagram provides a simplified and conceptual overview of how a basic computer system is organized and functions.
Computer and cpu
A computer is an electronic machine that can perform various operations according to a set of instructions or program. It accepts data and instructions as input, stores this information in memory, processes the data and instructions, and provides results as output. The central processing unit (CPU) is the brain and most important component of a computer system. It guides and controls the performance of the computer. The CPU contains an arithmetic logic unit for calculations, a control unit that extracts instructions from memory and coordinates other components by regulating the flow of information, and memory for temporary storage.
Major project final ppt copy
A programmable logic controller (PLC) is an industrial computer that monitors inputs and makes decisions to control outputs based on a stored program. PLCs are used in automation and consist of input and output modules, a CPU with memory, and a power supply. The CPU executes ladder logic programs to control machines and processes. PLCs allow automation without human effort by continuously scanning inputs, executing the program to determine outputs, and updating outputs. An example is a PLC controlling a motor based on start and stop buttons.
What is microprocessor
The document discusses the components and functions of a microprocessor in a microcomputer system. It describes the main parts of a microprocessor as the ALU, registers, and control unit. The microprocessor reads instructions from memory, accepts data as input, processes the data according to instructions, and provides results as output. Other components that interface with the microprocessor are memory for storing instructions and data, input/output devices for transferring data to and from the external world, and system buses for communication between components. The primary functions of the CPU are to fetch, decode and execute instructions, transfer data, respond to interrupts, and provide timing/control signals.
It322 intro
This document provides an introduction to microprocessors. It defines a microprocessor as the central component of a computer system, containing the logic, storage, and timing functions. Microprocessors accept digital input, process it according to stored instructions, and provide output. They communicate with peripheral devices via address and data buses. The document discusses different types of microprocessors from companies like Intel and AMD, as well as their instruction set architectures and applications in devices. It categorizes processors as CISC, RISC, or VLIW based on their instruction sets.
Embedded systems
An embedded system is a combination of computer hardware and software designed to perform a specific function. It is designed to perform real-time processing within the constraints of its function. Embedded systems control many common devices and are found in applications like microwave ovens, air conditioners, mobile phones, and vehicle security systems. They have seen tremendous growth in sectors like automobiles, aerospace, and mobile communications.
Computer system- shajjaduir Rahman
A computer system consists of hardware and software components that work together. The hardware includes input devices like keyboards and mice to provide data to the system, as well as a central processing unit to perform computations. Computer systems also include data storage components to retain digital information, and output devices like monitors and printers to communicate results in human-readable form.
Lesson 1 introduction to computer
For Educational Purpose Only;
for any queries please contact me at my email: Nivlem907@gmail.com
*if any laws violated, it is not intended
Microcontroller basics
The basics of electronics can be viewed also through the link http://bit.ly/2PPv0mv
A microcontroller is a small computer on a single metal-oxide-semiconductor integrated circuit chip. In modern terminology, it is similar to, but less sophisticated than, a system on a chip; an SoC may include a microcontroller as one of its components.
L 2 basic computer organization
The document discusses the basic organization and operations of a computer system. It describes the five basic operations of inputting, storing, processing, outputting, and controlling. It then explains the basic components of a computer system including the input unit, output unit, storage unit, arithmetic logic unit, control unit, and central processing unit. It defines primary and secondary storage and describes the functions of the input, output, and storage units.
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
More Related Content
What's hot
Computer fundamental mba
A computer uses both hardware and software to function, with the operating system managing resources and providing an interface between the user and hardware. Hardware includes the physical and tangible parts of a computer while software consists of programs and instructions. There are various types of computers classified by size from micro to mainframe, and operating systems can be single-user or multi-user depending on the number of simultaneous users supported.
Class 5 computer day 1
The document discusses the basic components of a computer including the keyboard and mouse as input devices, the monitor as the output display, and the system unit which houses the internal computer components and processes data according to programmed instructions. It notes that keyboards are used to input data and instructions, mice are pointing devices with buttons, monitors visually output processed results, and the system unit collectively refers to the parts inside the computer case.
Brief introduction about microcontroller and its uses
Express Technologies is a one-stop solution to accomplish your needs. They are one of the leading companies which deal in top-quality electronic components like Rabbit Semiconductor Microcontroller, resistors, relays, etc.
Block diagram of a computer
The document provides a block diagram and overview of the main components of a computer system. It describes the input unit which receives data and instructions and converts them to a format the computer can understand. The output unit accepts results from the computer and converts them to a human readable format. The central processing unit, or CPU, contains the control unit and arithmetic logic unit which perform processing and control other units. The CPU performs all calculations and controls data flow. Main memory and secondary storage hold data, instructions, and results.
Chs demo
1. The document discusses the basic data processing cycle in a computer system, which involves input, processing, and output units.
2. The central processing unit (CPU) is the most important part and directs all processing, containing an arithmetic logic unit, control unit, and main memory.
3. The two main types of memory are random access memory (RAM), which is temporary, and read-only memory (ROM), which permanently stores basic startup programs.
Computer Fundamentals.
What is a Computer? This slide is for basic and beginner. who want to learn the computer. The Five Basic Operations of a Computer System. Basic Computer Organization, Two Types of Storage Data Processing Chart Two types of Number Systems ane in this slide.all are basic information of computer .how nay types of storage of computer .
Microcontroller
A microcontroller is a small computer on a single integrated circuit chip that contains a CPU, memory, and input/output peripherals. It works like a computer but without an operating system and can be programmed to control machinery, appliances, and other devices. Microcontrollers have been used since the 1970s and examples include the Intel 8248 and those found in devices like Arduino boards and automobiles due to their abilities to save space and time in hardware and software applications.
I tf
IT refers to technologies that allow users to record, store, process, transmit, and receive information. A computer takes data as input, transforms it according to stored instructions, and outputs the processed information. The central processing unit (CPU) controls and manipulates data in a computer's memory, arithmetic logic unit (ALU), and control unit. The control unit obtains and interprets instructions to notify other components, while the ALU performs logical and arithmetic operations. Memory stores programs and data during processing in volatile, randomly accessible locations. Input and output units convert and display data. Secondary storage provides long-term, non-volatile data storage outside the CPU.
Embedded Systems
An embedded system is a combination of hardware and software that performs a dedicated function within a larger mechanical or electrical system. Embedded systems are designed to respond to events in real-time and operate with limited resources. They are used across many industries in applications like automotive systems, industrial controls, medical devices, office equipment, and more.
Chapter 1
The document discusses programmable logic controllers (PLCs). It begins by explaining the basic principles of a control system, including inputs, a processor, and outputs. It then provides a history of PLC development from the 1960s to present. The main components of a PLC system are described, including the power supply, input/output modules, processor, and programming device. PLCs were created to offer programmable control like relay logic systems and are now widely used in industry.
Block diagram by vasant
John von Neumann was a Hungarian-American mathematician who helped develop the block diagram model of a computer. The block diagram shows the major components of a computer system including input and output units to receive and display data, a central processing unit (CPU) to perform calculations and control operations, and a storage unit to hold data and instructions. The CPU consists of an arithmetic logical unit to perform calculations and a control unit to direct the system. The block diagram provides a simplified and conceptual overview of how a basic computer system is organized and functions.
Computer and cpu
A computer is an electronic machine that can perform various operations according to a set of instructions or program. It accepts data and instructions as input, stores this information in memory, processes the data and instructions, and provides results as output. The central processing unit (CPU) is the brain and most important component of a computer system. It guides and controls the performance of the computer. The CPU contains an arithmetic logic unit for calculations, a control unit that extracts instructions from memory and coordinates other components by regulating the flow of information, and memory for temporary storage.
Major project final ppt copy
A programmable logic controller (PLC) is an industrial computer that monitors inputs and makes decisions to control outputs based on a stored program. PLCs are used in automation and consist of input and output modules, a CPU with memory, and a power supply. The CPU executes ladder logic programs to control machines and processes. PLCs allow automation without human effort by continuously scanning inputs, executing the program to determine outputs, and updating outputs. An example is a PLC controlling a motor based on start and stop buttons.
What is microprocessor
The document discusses the components and functions of a microprocessor in a microcomputer system. It describes the main parts of a microprocessor as the ALU, registers, and control unit. The microprocessor reads instructions from memory, accepts data as input, processes the data according to instructions, and provides results as output. Other components that interface with the microprocessor are memory for storing instructions and data, input/output devices for transferring data to and from the external world, and system buses for communication between components. The primary functions of the CPU are to fetch, decode and execute instructions, transfer data, respond to interrupts, and provide timing/control signals.
It322 intro
This document provides an introduction to microprocessors. It defines a microprocessor as the central component of a computer system, containing the logic, storage, and timing functions. Microprocessors accept digital input, process it according to stored instructions, and provide output. They communicate with peripheral devices via address and data buses. The document discusses different types of microprocessors from companies like Intel and AMD, as well as their instruction set architectures and applications in devices. It categorizes processors as CISC, RISC, or VLIW based on their instruction sets.
Embedded systems
An embedded system is a combination of computer hardware and software designed to perform a specific function. It is designed to perform real-time processing within the constraints of its function. Embedded systems control many common devices and are found in applications like microwave ovens, air conditioners, mobile phones, and vehicle security systems. They have seen tremendous growth in sectors like automobiles, aerospace, and mobile communications.
Computer system- shajjaduir Rahman
A computer system consists of hardware and software components that work together. The hardware includes input devices like keyboards and mice to provide data to the system, as well as a central processing unit to perform computations. Computer systems also include data storage components to retain digital information, and output devices like monitors and printers to communicate results in human-readable form.
Lesson 1 introduction to computer
For Educational Purpose Only;
for any queries please contact me at my email: Nivlem907@gmail.com
*if any laws violated, it is not intended
Microcontroller basics
The basics of electronics can be viewed also through the link http://bit.ly/2PPv0mv
A microcontroller is a small computer on a single metal-oxide-semiconductor integrated circuit chip. In modern terminology, it is similar to, but less sophisticated than, a system on a chip; an SoC may include a microcontroller as one of its components.
L 2 basic computer organization
The document discusses the basic organization and operations of a computer system. It describes the five basic operations of inputting, storing, processing, outputting, and controlling. It then explains the basic components of a computer system including the input unit, output unit, storage unit, arithmetic logic unit, control unit, and central processing unit. It defines primary and secondary storage and describes the functions of the input, output, and storage units.
What's hot (20)
Brief introduction about microcontroller and its uses
Brief introduction about microcontroller and its uses
Recently uploaded
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcHow to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Top five deadliest dog breeds in America
Thinking of getting a dog? Be aware that breeds like Pit Bulls, Rottweilers, and German Shepherds can be loyal and dangerous. Proper training and socialization are crucial to preventing aggressive behaviors. Ensure safety by understanding their needs and always supervising interactions. Stay safe, and enjoy your furry friends!
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaPollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Recently uploaded (20)
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Css lesson (Basic Concept of Computer)
- 11. • INPUT UNIT Used for entering data and programs into the computer system by the user for processing. • STORAGE UNIT Used for storing data and instructions before and after processing. • OUTPUT UNIT Used for storing the result as output produced by the computer after processing.