4. NCP is easily applicable by
brush, roller or sprayer.
No more blasting, its time to
use environmentally friendly
method
5. nC® NANO CORROSION PASSIVATOR
NO NEED
BLASTING
nC®
PRIMER
NO NEED
BLASTING
Zink Primer
C5
NO NEED
BLASTING
Heavy Duty
NO NEED
BLASTING
nC® COLD
ALLOY
NO NEED
BLASTING
nC® High
Chemical
Resistance
HCR
NO NEED
BLASTING
nC® Nano
Corrosion
Passivator
Undercoat
21
NO NEED
BLASTING
HPC®-HT
Primer
NO NEED
BLASTING
nC® FLUID
NO NEED
BLASTING
nC®
TOUCH UP
6. nC® Nano Corrosion Passivator Fluid
TECHNICAL
• Removes corrosion
• Passivates corrosion
• Passivates metal
• Displaces salt
• Displaces water
• Protects up to 6 years
against corrosion in salt
water (confined areas only)
• Protects over 15 years in
fresh water (confined areas
only)
• Not toxic
• No solvents
FINANCIAL
• 25% up to 35% less energy
cost
• 50% up to 70% less
application/project cost
• Low cost per m²
• First-time-right product, fast
application, low impact
• Very long service time
• Used left-over product is
always re-usable.
OPERATIONAL
• No prepwork like chipping or
sandblasting needed
• Application by floating,
brush, roller or spray
• Application during hot
operation, max 95⁰C
• Application at -5⁰C possible
• Short curing time of 4 hours
• Very small crew needed for
easy and fast application
• No sandblasting = No dust!
• Product has limitless shelf-
life
7. nC® Nano Corrosion Passivator Primer
TECHNICAL
• 2 layers become one
• Bonds chemically in metal
• Passivates metal
• Passivates corrosion
• Total DFT < 35 micron
• Usage 25g/m²
• Flexible in cold and heat
• Conductive
• Extremely abrasion resistant
• Free of lead and chrome
• Lifetime cycle > 20 years
FINANCIAL
• 50% up to 70% less
application/project cost
• Minimizes corrosion related
costs
• No chipping or gritblasting
related costs
• Low m² price
• No extra costs for specialist
equipment
• Much shorter off-hire period
due to fast application
OPERATIONAL
• No blasting, grinding or
chipping needed
• Can be applied on wet
surface
• Very fast curing time
• Low weight per m²
• Application by brush, roller
or airgun / spraying
• No repairs after welding
• Shear, shock & abrasion
resistant
• New on old possible
• Must be finished over, can
be painted over with regular
paint
8. nC® Nano Corrosion Passivator Cold Alloy
TECHNICAL
• 2 components 1:3 ratio
• Bonds chemically
• Passivates metal
• Prevents galvanic corrosion
• DFT 15 micron
• Extremely low consumption,
spread-rate 30-40g/m²
• Flexible in cold and heat
• Withstands up to 1.300⁰C
• Extremely abrasion resistant
• Free of lead and chrome
• Lifetime cycle > 15 years
FINANCIAL
• Minimizes corrosion related
costs, renewals
• Minimizes chipping and
gritblasting costs
• Minimizes welding damage
costs
• Low m² price
• No extra costs for
• specialist equipment
• Less downtime
OPERATIONAL
• No primer needed
• No specialist equipment
needed
• 1kg covers 33m³ or more
• Very fast curing time
• Low weight per m²
• Application by brush, roller
or airgun / spraying
• No repairs after welding
• Shear, shock and abrasion
resistant
• New on old possible
• Can be painted over
9. nC® Nano Corrosion Passivator Touch Up
TECHNICAL
• Removes corrosion
• Passivates corrosion and
metals
• Displaces salt & water
• High spread-rate of 15m²/l
up to 30m²/l
• Fast curing time
• Protects over 2 years
against corrosion outdoors
• Protects up to 10 years
against corrosion indoors
• Develops no toxic or
flammable fumes
• Contains no solvents
FINANCIAL
• Up to 70% lower cost of
project compared to
traditional coating
• Low cost of material, no
primer needed
• No disposal costs for
blasting medium
• No downtime of asset or
vessel necessary
• Low labour costs
OPERATIONAL
• No prepwork like
sandblasting needed = no
dust!
• Ideal for fast touch-ups or
spot repairs.
• Application by floating,
brush, roller or spraying
• Application on wet surfaces
possible
• Application during rain
possible
• No heavy safety measures
needed during application
• Shock and shear proof once
applied
• Can be painted over, even
after months
10. nC® Nano Corrosion Passivator High Chemical Resistance
• know as EP-Siloxane
• The 2-component system will prevent metals from
corroding in extreme hostile chemical environments such
as UV, weathering and chalking
• High Chemical Resistant is developed for applications
above, in and under water it is very versatile in used
11. nC® Nano Corrosion Passivator High
Chemical Resistance
TECHNICAL
• 2 components 14:3 ratio
• Bonds chemically
• Passivates metal
• DFT 100 micron
• Spread-rate 130g/m²
• Extremely strong and hard
• Not brittle
• Inpermeable
• Fast drying
• Can be painted over
• Free of solvents
• All RAL colours available
FINANCIAL
• Minimizes corrosion related
costs
• Minimizes downtime for steel
repairs
• Low m² price
• Makes choices for
• stainless steel,
nongalvanized or non-zinc
metals possible
OPERATIONAL
• Withstands heavy chemicals
• Withstands UV, weathering,
• chalking
• No need for sandblasting or
chipping if NCP Primer is
used underneath
• Easy to apply, very fast
curing time & low weight per
m²
• Suitable for use above, in
and under water/liquids
• Shear, shock, abrasion
resistant & easy-to-repair
• Lifetime cycle > 25 years
12. nC® Nano Corrosion Passivator Undercoat 21
TECHNICAL
• Passivates metal against
corrosion
• Stops the corrosion process
• Bounds chemically to metal
surfaces, this ensures very
long protection
• Removes salt crystal &
water
• Seals metal surface
• Viscosity< 1000 m Pas
• Transparent
• High yield from 12m²/l to
15m²/l
• Dry film thickness 60 μm &
fast curing 2-4 hours
FINANCIAL
• On average 60% lower
project costs due to time
savings
• Low material costs combined
with long service life
• No extra costs for the
disposal of blasting grit
• Time savings due to the
absence of blasting work
• Quick lead time reduces
labor costs
OPERATIONAL
• Applies to dry or damp
surface
• Suitable for bare steel or
rusty surface
• No blasting or sanding or
chipping necessary
• No blasting = No dust!
• Ideal for quick touch-ups or
spot repairs
• Apply by brush, roller or
spray gun
• Slightly flexible, won’t pop off
• Can be painted over with
any paint system
13. HPC®-HT Primer
TECHNICAL
• Passivates metal against
corrosion
• Stops the corrosion process
• Applied when a hot system
cannot be shut down
• seal and block CUI over hot
• Viscosity< 1000 m Pas
• Transparent
• High yield from 12m²/l to
15m²/l
• Dry time 10 seconds/coat at
400-1112℉
FINANCIAL
• On average 60% lower
project costs due to time
savings
• Low material costs combined
with long service life
• No extra costs for the
disposal of blasting grit
• Time savings due to the
absence of blasting work
• Quick lead time reduces
labor costs
OPERATIONAL
• Applies to metal, concrete
and other high- temperature
surfaces
• Suitable for bare steel or
rusty surface
• No blasting or sanding or
chipping necessary
• No blasting = No dust!
• Ideal for quick touch-ups or
spot repairs
• Apply by brush, roller or
spray gun
• Slightly flexible, won’t pop off
• Can be painted over with
any paint system
21. APPLICATION
STEP 1.
EMPTY BALLAST TANK. OPEN MANHOLE
COVER. REMOVE MUD. POUR INTO TANK
THE CALCULATED AMOUNT.
STEP 2.
SLOWLY PUMP SEA WATER INTO TANK.
ALLOW nC TO SPREAD ON THE WATER. SPEED
OF WATER MUST BE LESS THEN 20CM/MIN.
STEP 3.
FILL UP ALL COMPARTMENT SLOWLY UNTIL TANK TOP. ALLOW AIR TO ESCAPE FROM
POCKETS BY MEANS OF ATTACHING TUBES IN HIGHEST POINTS OF TANKS WITH A VALVE
AT THE MANHOLE COVER
STEP4
TANK IS READY FOR USE. CURING TIME 4HRS
NOTE:
NO CHEMICAL SHOULD BE ALLOWED DURING CURING TIME.
IT MAY RESULT IN SHORTER LIFE SPAN.
STEP 5.
WEAR OLD OVERAL TO INSPECT THE WALL IF NECESSARY.
THERES NO TOXIC FUMES OR HARMFUL GASSES. THE
AMOUNT OF RUST FLAKES CAN BE VERY HIGH IF
CORROSION IS HIGH.
22. NCP at work
DB4SB during application, April 2013
MV Tango Sol, Tango Shipping
Supt. Michael Kafoe
DB4SB during inspection, March 2015
MV Tango Sol
Supt. Michael Kafoe
23. NCP at work
NCP application by brush, finish
with Perma Film. This combi is
Approved for 5 years by DNVGL.
Slb. Adriaan, Kotug
Supt. Koos Smoor
24. NCP at work
NCP spreading over water surface, DB2PS.
DB2PS right after treatment.
MV Marianne-G, Rederij Groen
Supt. Matthijs Seket
25. NCP at work
DB3PS right before application October 2014.
DB3PS during inspection December 2015.
MV Flintersky, Flinter
Supt. Job Pannekoek
26. NCP at work
Uncoated inserts were
welded in during March
2013 (16mm). NCP was
applied right after
welding, no other coating
was applied. During
inspection in January
2015 the inserts showed
no pit corrosion, no
pocks, no corrosion on
weldings. Material
thickness was ultrasonic
measured at 16mm.
MV Flinterstar, Flinter
Supt. Ronald de Jong
27. NCP at work
nC Nano Corrosion Passivator on PEOPLE:
• No sandblasting
vs. sandblasting
• Harmless vs.
Health hazard
• Easy work vs.
Hard labour
28. NCP at work
nC Nano Corrosion Passivator on PLANET:
• Waste:
1 re-usable IBC vs.
180,000 kg big bags
• Pollution:
Non-hazardous vs.
Hazardous
• Production:
Bio-based vs.
Chemical
29. NCP at work
nC Nano Corrosion Passivator on PROFIT:
1
Cost of docking:
RM 75,000 vs.
RM 247,000
Cost of material:
RM 315,000 vs.
RM 1,751,000
Time of work:
36 manhours vs.
100 manhours
sailing
