1. Graham J. Chambers, P. Eng. - Civil/Structural Engineer
Education
Bachelor of Engineering (1980 – 1984)
University of Auckland
New Zealand
Professional Affiliation
Member of the Association of Professional Engineers and Geoscientists of Alberta, (APEGA).
Contact
Telephone – (403) 252 1862
E-mail – gandcchambers@gmail.com
Software
Risa – 3D – Proficient.
S-Frame – Proficient.
Excel – Proficient. Used extensively for hydrology and hydraulics calculations for site drainage.
Word – Proficient. Approximately 40 - 50 words per minute.
Dyna 6.1 – Working knowledge.
Mathcad – Working knowledge.

2. Graham J. Chambers, P. Eng. - Civil/Structural Engineer
Work Experience
2015 – Present
Fluor Canada Ltd., Calgary, Alberta.
Civil/Structural Engineer
Suncor Fort Hills Oil Sands Project, Suncor Energy Inc. Fort McMurray, Alberta.
 Coordination of analysis and drawing production of Recycled Water and Fire Water Ponds by third
party geotechnical engineering company.
 Scope of work document preparation for Recycled Water Pond Wet Well concrete structure
construction.
 Design of cast-in-place concrete cable trench.
 Design of reinforced concrete Firewater Pond intake structures.
 Coordination of hydraulic design of Recycled Water Pond spillway structures.
 Design of reinforced concrete Recycled Water Pond spillway structures.
 Monitoring and inspection of Recycled Water Pond structures construction.
 On-site construction support.
Rangeland Engineering Company Ltd., Calgary, Alberta.
Civil/Structural Lead
 Human resource planning and allocation.
 Review and checking of structural steel and reinforced concrete design calculations.
 Scope of work preparation.
 Design of tank farm containment area and tank foundations.
 Design of bullet structural steel supports and slide plate assembly.
 Design of dehydrator structural steel foundation skids.
 Design of firewater pump building suspended reinforced concrete slab.
 Design of various steel and concrete structures and associated pile foundations.

3. Graham J. Chambers, P. Eng. - Civil/Structural Engineer
2011 – 2013
Jacobs Canada, Calgary, Alberta.
Civil/Structural Engineer
Kirby South SAGD Project, CNRL, Conklin, Alberta.
 Detailed grading for well pads and access roads.
 Design of tank farm containment and leak detection system.
 Preparation of Laboratory Building requisition documents.
 Design check of N/S pipe rack piles and structural steel.
Kirby North SAGD Project, CNRL, Conklin, Alberta.
 Civil engineering support for EIA and EPEA approvals.
 Coordination of on-site muskeg probing program.
 Design of preliminary grading.
 Hydraulic design for culverts, ditches, and runoff pond.
 Detailed grading design for Central Processing Facility.
 Geo-fabric reinforced gravel plant road design review.
Grouse SAGD Project, CNRL, Conklin, Alberta.
 Geotechnical investigations scope of work preparation.
2009 – 2011
Fluor Canada, Calgary, Alberta.
Lead Civil Engineer
Kearl Oil Sands Project, Imperial Oil Ltd., Fort McMurray, Alberta.
 Design of finished grade for Infrastructure and Off-Lease areas.
 Preparation of finished grade contract documents.
 Review of gravel road structure design.
 Run-off pond outlet sump structure design.
 Temporary construction power road crossing design.

4. Graham J. Chambers, P. Eng. - Civil/Structural Engineer
2004 – 2009
Jacobs Canada, Calgary, Alberta.
Civil/Structural Engineer
Heartland Upgrader, BA Energy, Fort Saskatchewan, Alberta.
 Review of natural drainage on proposed upgrader site.
 Preparation of storm water, oily water, and firewater drainage philosophy documentation.
 Site grading and storm water ditch and culvert design.
 Oily water sewer and firewater deep underground design.
 Underground firewater piping freeze protection design.
 Oily water, storm water, and sludge ponds design.
 Site/design office coordination during grading and deep undergrounds installation.
 Jacobs/BA Energy coordination for emergency and maintenance vehicle access to process units.
 Reinforced concrete paving and freeze protection design.
 Reinforced concrete neutralization pit design.
2001 – 2004
Upside Engineering Ltd., Calgary, Alberta.
Lead Civil/Structural Engineer
Firebag Stages 1 and 2, Pipeline Terminus Facilities, Suncor Energy, Fort McMurray, Alberta.
 Conceptual civil/structural design.
 Civil/structural cost estimate.
 Coordination of survey of existing plant.
 Coordination of geotechnical investigations and reporting.
 Coordination and review of civil/structural engineering design.
 HVAC design for buildings.
 Construction support.
Firebag Stage 3, Pipeline Terminus Facilities, Suncor Energy, Fort McMurray, Alberta.
 Conceptual civil/structural design.
 Civil/structural Design Basis Memorandum preparation.
 Preliminary civil/structural cost estimate.

5. Graham J. Chambers, P. Eng. - Civil/Structural Engineer
2000 – 2001
Colt Engineering Ltd., Calgary, Alberta.
Civil/Structural Engineer
Lime Sludge Pond Remediation, Imperial Oil Ltd., Cold Lake, Alberta.
 Design of HDPE liner, leak detection, and drainage system.
 Civil/structural design of roller compacted concrete trafficable surface.
 Structural design of ancillary supporting structures.
 Cost estimate.
 Construction support.
1998 – 2000
Veco Alberta Ltd., Calgary, Alberta.
Lead Civil/Structural Engineer
Cancarb Power Generation Facility, TransCanada Power, Medicine Hat, Alberta.
 Civil/structural cost estimate.
 Coordination of survey of existing plant.
 Coordination of geotechnical investigations and reporting.
 Coordination and review of civil/structural engineering design.
 Construction support.
Structural Engineer
Heglig Oil Processing Facility, CEPCC, Heglig, Sudan.
 Seismic evaluation of the site.
 Structural design of piles in highly expansive clays.
 Structural/seismic design of above ground steel structures.
 Construction support.

6. Graham J. Chambers, P. Eng. - Civil/Structural Engineer
1997 – 1998
Reid Crowther and Partners, Calgary, Alberta.
Structural Engineer
Allowance Avenue Overpass, City of Medicine Hat, Medicine Hat, Alberta.
 Bridge pier H-pile foundation design.
 Reinforced concrete bridge pier design.
 Reinforced earth abutment layout.
 Welded steel girder design.
Proprietary modular retaining wall, Calgary, Alberta.
 Structural design of concrete foundations and slabs-on-grade.
 Structural design of structural steel supports.
 Coordination of pre-fabricated building design.
1992 – 1996
Klohn Crippen Consultants Ltd., Calgary, Alberta.
Civil/structural Engineer
Pine Coulee dam low level outlet, Government of Alberta, Stavely, Alberta.
 Final routing of concrete conduit along east side of coulee.
 Hydraulic design of inlet, gate well, conduit, and spillway.
 Reinforced concrete inlet, gate well, and spillway design.
 Riprap design for front face of dam.
Concrete Arch Dam, City of Kimberly, Kimberly, British Columbia.
 Layout of dam between rock wall abutments.
 Structural design of dam using ADSAS.
 Hydraulic design of dam crest.
 Hydraulic design of low level outlets.
 Structural design of downstream splash pads.

7. Graham J. Chambers, P. Eng. - Civil/Structural Engineer
Concrete Engineer
Roseau Dam, CIDA, St. Lucia, West Indies
 QA/QC for concrete aggregate produced at on-site quarry.
 QA/QC for concrete mix produced at on-site batching plant.
 QA/QC for construction of reinforced concrete structures.
1991
Carswell Consulting Engineers Ltd., Calgary, Alberta.
Structural Engineer
Glenmore Gardens parkade and masonry façade refurbishment, Calgary, Alberta
 Survey of parkade to determine areas requiring repair.
 Design of reinforced concrete repairs.
 Selection of waterproof membrane.
 Design of drainage remediation.
 Construction monitoring of parkade and façade repairs.
1989 – 1991
Associated Engineering (B. C.) Ltd., Burnaby, British Columbia.
Structural Engineer
15th
Avenue Pedestrian Bridge, City of Burnaby, Burnaby, British Columbia
 Seismic analysis of superstructure.
 Design of reinforced concrete piers and foundations.
 Design of reinforced concrete superstructure.
 Design of pier/foundation connections for plastic hinging.
Kinmen Trestle, Skeena Cellulose Ltd., British Columbia
 Design of structural steel piers.
 Design of welded steel girders.

8. Graham J. Chambers, P. Eng. - Civil/Structural Engineer
Construction Engineer
Brookemere No. 1 Bridge, B. C. Ministry of Highways, Merritt, British Columbia.
 Construction monitoring and inspection of bridge deck.
1988 – 1989
Tonbridge Wells Borough Council, Pembury, Kent, England
Structural Engineer
 Structural design checking for building permit approval.
1988 – 1989
Westport Developments Ltd., Glendora, California, USA.
Site Engineer
Glendora Townhouse Development, Azusa, California, USA.
 Coordination of trades at site.
 Construction inspection
1986 – 1987
Ministry of Works and Development, Wellington District Office, Wellington, New Zealand.
Assistant Design Engineer
Central Police Station, New Zealand Police Service, Wellington, New Zealand
 Design of 1st
and 2nd
floor reinforced concrete blast panels.
 Design of structural steel rooftop recreation facility.
Government building seismic survey, Government of New Zealand, Wellington, New Zealand
 Evaluation of seismic capacity and capability of existing government buildings.

9. Graham J. Chambers, P. Eng. - Civil/Structural Engineer
1984 – 1986
Ministry of Works and Development, Upper Waitaki Power Development, Twizel, New Zealand.
Assistant Site Engineer
Ohau C Power House
 Construction monitoring and reporting.
Ruataniwha Spillway repairs
 Supervise batching of “dry-mix” shotcrete.
 Supervise application of polymer-modified shotcrete.
 Supervise pouring of concrete spillway repair slabs.
 Supervise pouring of reinforced concrete “shark-tooth” weir.
 Engineer in charge of project concrete batching plant.