The document lists equipment used during a film production, including a Canon 700D camera, camera bag, camera batteries, SD cards, tripod, LED light, zoom mic, and LED light batteries. The camera was used to record HD footage and allow focus pulling. The light camera bag carried and protected the equipment during filming. Multiple SD cards and batteries were brought to prevent interruptions if any failed. The tripod provided steady shots from varying heights. The LED light and zoom mic helped control lighting and capture high quality audio.
2. CANON 700D
This is the camera we will be using during our production.The
camera allows HD recordings and was a very important piece of
hardware that we needed during our production.The camera
has many features such as being able to focus pull.This was used
In our production for effect during the scenes.
3. CAMERA BAG
A camera bag was used to hold and carry our equipment around.
The bag was quite light and was a very useful tool to use. It had
other compartments where we could place camera batteries and
also the SD cards for the cameras.The camera bag although
light would allow the camera to withstand a drop and still be
unharmed.This is a vital piece of equipment as without it the
safety of the camera would be at stake when moving from
location to location.
4. CANON 70D BATTERIES
Camera batteries were essential as we needed them to operate
the cameras. A lot of batteries were needed as they usually ran
out. Without the batteries we would not have been able to
power the camera and thus we would not have been able to film
any of our scenes. We carried two batteries on hand at all times
incase one ever died of battery or had failed.
5. SD CARD
We needed an SD Card to hold our footage.This is a very
important piece of equipment as without this we wouldn’t have
been able to film.This was our source to transfer footage from
the camera to the macs.We took two SD Cards just in case one
was too full to hold any more footage or incase one had seemed
to have failed on us. During one point in the filming process one
of the SD cards reached its maximum capacity and this required
us to use the second SD card.This would have caused a lot of
problems had we not packed two at all times.
6. TRIPOD
We needed a tripod to increase our variety of shots.We could
change the different height levels for filming and we also used
the tripod to film steady shots.TheTripod allowed us to film our
scenes without any shaking and was very useful.The tripod also
allowed us to get many shot angles as it could extend to a very
high height and could also contract for us to be able to get some
low angled shots.
7. LED LIGHT
The LED light we used was very useful towards our production.
The LED light allowed us to control and manipulate the lighting
in our scenes. We were also able to remove a lot of grain due to
the light.
8. ZOOM MIC
We used a zoom mic for the voiceovers.This was very helpful as
it was very high quality and allowed us to get very good
voiceovers.The zoom mic was used for the phone scene where a
mysterious caller would ring the phone.This also allowed us to
be able to manipulate this sound to make the voice sound
deeper and add more effect to the scene.
9. LED LIGHT BATTERIES
This was used to power the LED batteries.Without the batteries
we would not have been able to use the LED lights and thus
would have had a lot of grain within our footage due to poor
lighting.