1. PERSONAL PARTICULARS
Name : Emmanuel C. Pagorogon
Residential Address : Block 97, #08-36, Commonwealth Crescent, 140097
Contact Detail : Mobile: 9772 0 0 0 9 Landline:
6471 0 3 9 1
E-mail : pagsky@yahoo.com
pagsky1128@gmail.com
Date of Birth : 22-May-1969
Nationality : Filipino/Singapore PR
NRIC # S6962673D
Race : Filipino
Gender : Male
PROFESSIONAL EXPERIENCE
Date: June 2003 – June 2016
Company: CB&I Singapore Pte. Ltd
Position: Senior Piping Engineer / Senior Pipe Stress Engineer
Job Description:
• Lead Pipe Stress Engineer for various projects including Shell Molikpaq Tie-in
Project, Exxonmobil EPC4 PNG LNG Project, AGL LNG Project, and Exxonmobil
LONGFORD Gas Conditioning Plant.
• Prepares reports and monitors progress on all pipe stress works and report back to the
lead piping engineer for coordination.
• Performed Pipe Stress analysis for critical lines using Caesar II software for onshore,
offshore and FPSO projects.
• Stress sketch mark-ups. Performs equipment nozzle check for compressors, vessels,
tanks, pumps and Air-coolers according to Project/Client Guidelines and latest API &
NEMA standards and codes.
• Checking of Pipe Stress analysis package.
• Preparing Pipe Stress guidelines and specifications as per client, company and industry
standards.
• Designing pipe supports and preparing pipe support guidelines and specifications as
per client and industry standards like MSS etc.
Professional Resume of Emmanuel Pagorogon Page 1
2. • Prepare Bid Document for springs, snubbers, rigid struts, and other proprietary pipe
support items.
• Builds pipe support models in PDMS.
• Coordinate works to other discipline such as Piping Design, Structural, Mechanical
etc.
• Assigned as a coordinator between Houston lead office and Chiyoda Philippines as
support office for Cameron LNG Project.
• Resolves queries and problems arises during detailed design phase. Acts as a
representative of the Lead office in decision making on simple and complex pipe stress
queries.
• Provide assistance to the support office during finalization of stress package.
• Perform Module study for Basis of Design on Floating LNG. PDMS modeling of
piping and equipment on modules for weight and volume study. Generate Unit area
plot plans using PDMS draft.
List of Project:
Cameron LNG Project
Freeport LNG Project
Aasta Hansteen Topside Project
Shell Abadi FLNG (FEED Basis of Design)
Longford Gas Conditioning Plant
AGL LNG Project
FPSO Cidade de Mangaratiba MV24 – Process Module
EPC4 PNG LNG Project
TUPI FPSO Cidade de Angra Dos Reis MV22
Shell Ethylene Cracker Complex
Woodside Vincent FPSO
Statoil Volve Development Offshore
Molikpaq Tie-in Offshore
Mellitah Gas Plant
Date: April 1999 – June 2003
Company: FLUOR Corporation Philippines
Position: Associate Design Engineer – Pipe Stress Engineer
Job Description:
• Performed as a Piping Stress Engineer and as a Project Back up for Lead Stress
Engineer.
• Develops piping flexibility, support element, spring hangers, expansion joint and shock
arrestor specifications.
• Perform visual, manual, and computer analysis of piping systems using Rebis Autopipe
stress analysis software.
• Interprets and analyzes stress results.
• Locates and size expansion loops, guides and anchors on Piperacks and piping system
whether it is stress or non-stress analyze.
Professional Resume of Emmanuel Pagorogon Page 2
3. • Calculates equipment loadings (nozzle reactions on vessels, pumps, compressors,
tanks, etc.) to determine whether forces and moments are within allowable mechanical
design.
• Calculates equipment nozzle loadings using WRC 107 and communicate to mechanical
or vessel group.
• Calculates structural loadings that includes anchor loading and pipe deadweight to
ensure a structure that is adequate to support and sustain the piping system.
• Coordinates with piping design and other discipline to resolve differences between
design and stress requirements.
• Prepares reports and monitors progress on all pipe stress works.
• Maintains and updates all stress system files.
• Conducts basic stress engineering workshop for piping designers.
List of Project:
United Project
HAMACA Project
Procter and Gamble Projects
Date: July 1997 – September 1998
Company: TCGI Philippines Inc.
Position: Mechanical and Sanitary Inspector
Job Description:
• Assigned as a Mechanical HVAC, Fire Protection, and Sanitary
inspector in behalf of the owner/client.
• Reviews project specifications. Making sure that contractor’s work
is in compliance with project specifications and design plans.
• Communicate with Mechanical Designer on resolving issues
concerning design versus on site situation.
• Prepares reports and progress of Mechanical contractors. Checking
and inspection of all Mechanical materials brought on the field.
• Witness all testing done on equipment and piping system.
Date: April 1993 – June 1997
Company: ESCA Incorporated Philippines
Position: Mechanical and Sanitary Inspector
Job Description:
• Assigned as a Mechanical HVAC, Fire Protection, and Sanitary inspector in behalf of
the owner/client.
• Reviews project specifications. Creates bid forms for Contractors and Sub-
contractors.
• Evaluates bid from participating contractors for the project. Making sure that
contractor’s work is in compliance with project specifications and design plans.
Professional Resume of Emmanuel Pagorogon Page 3
4. • Communicate with Mechanical Designer on resolving issues concerning design versus
on site situation.
• Prepares reports and progress of Mechanical contractors. Checking and inspection of
all Mechanical materials brought on the field. Witness all testing done on equipment
and piping system
Date: February 1992 – February 1993
Company: ENERTECH Systems Industries Incorporated, Philippines
Position: Mechanical and Piping Draftsman
Job Description:
• Assigned as a Mechanical and Piping draftsman.
• Develop manually plans and detailed drawing of Steam boilers for production.
• Creates and develop manually As-built Steam piping plans, elevations and detailed
drawings.
• Performs Site surveys and measurements.
EDUCATION
Date: June 1986 – April 1991
School: Don Bosco Technical College, Philippines
Highest Attainment: Bachelor of Science in Mechanical Engineering
Date: June 1982 – April 1986
School: Arellano University Plaridel High School, Philippines
Highest Attainment: Secondary School
Date: June 1976 – April 1982
School: Dona Basilisa Yangco Elementary School, Philippines
Highest Attainment: Primary School
OTHER SKILLS
Attended the following trainings organized by Fluor Corporation- Philippines,
Piping Department for the Development of its members:
Phase 1 and Phase 2, Basic Piping Engineering
Phase 3, Equipment and Piping Layout
PDS Intergraph
Microstation
Basic and Advance Pipe Stress Engineering and Analysis
Professional Resume of Emmanuel Pagorogon Page 4
5. Includes CAESAR II hands- on training for Dos and Window
Versions
Rebis AUTOPIPE – Basic Stress Analysis
Had proficiency in using the following:
Aveva PDMS software for Pipe Support module.
Microsoft Excel, Word and Power Point.
Smartplant Review and Autodesk Navisworks.
Other relevant trainings on P&ID usage, Discipline interface, Utility piping lay-out, Location
Control Plan (LCP), and Miscellaneous Pipe Support
AFFILIATIONS
PROFESSIONAL : Registered Mechanical Engineer
REGISTRATION Philippine Regulation Commission
License No. 0045075
REFERENCES
Edward Crawford, P.E.
Lead Piping Engineer
CB&I Houston TX
edward.crawford@cbi.com
Eduardo Verdeza
Pipe Stress Engineer
CB&I Houston TX
eduardo.verdeza@cbi.com
Edwin T. Afaga
Project Engineer
CB&I Singapore Pte Ltd
eafaga@cbi.com
Professional Resume of Emmanuel Pagorogon Page 5
6. Includes CAESAR II hands- on training for Dos and Window
Versions
Rebis AUTOPIPE – Basic Stress Analysis
Had proficiency in using the following:
Aveva PDMS software for Pipe Support module.
Microsoft Excel, Word and Power Point.
Smartplant Review and Autodesk Navisworks.
Other relevant trainings on P&ID usage, Discipline interface, Utility piping lay-out, Location
Control Plan (LCP), and Miscellaneous Pipe Support
AFFILIATIONS
PROFESSIONAL : Registered Mechanical Engineer
REGISTRATION Philippine Regulation Commission
License No. 0045075
REFERENCES
Edward Crawford, P.E.
Lead Piping Engineer
CB&I Houston TX
edward.crawford@cbi.com
Eduardo Verdeza
Pipe Stress Engineer
CB&I Houston TX
eduardo.verdeza@cbi.com
Edwin T. Afaga
Project Engineer
CB&I Singapore Pte Ltd
eafaga@cbi.com
Professional Resume of Emmanuel Pagorogon Page 5