1. Andrew David Scott
4 Beech Manor Stoneywood Aberdeen AB21 9AZ
Phone: 07827930475 E-Mail: andrewdavidscott35@yahoo.co.uk
Objective
To continue to perform at the highest level of safety.
Started my offshore career as Roustabout with Sedco Forex, working my way through the Drilling department.
In 2012 I was given the position of Tourpusher/toolpusherin Transoceans South American regions development pool, where I
gained valuable experience working on a number of the companies Rigs. I made the decision in 2013 to accept the position as
Driller during the commissioning, Sea trials and deployment into operations of the newly built Deepwater Asgard.During this time
I attended various Aker Solutions training courses and assisted with commissioning of the Drilling package which includes Wirth
9000hp main and 6000hp auxiliary drawworks, MDDM 1250t top drives, Aker vertical pipe handler racking machines, Wirth
2200hp mud pumps and the STEP offshore automated mud mixing system.
In September 2015 I was offered a position with Ocean Rig where I gained experience with NOV drilling package. Have worked
in various locations for Transocean and Ocean Rig including Indonesia, Venezuela, Trinidad, Brazil, Ivory coast, Angola,Congo,
Suriname and UK.
Experience
Driller Sept 2015 to July 2016
Ocean Rig Resource Pool.
Assigned to the Ocean Rig Skyros, Apollo and Paros.
Duties included operating NOV drilling package which included TDX 1250 top drive and NOV SSGD 1250 – 6900 HP
Drawworks.
Perform the daily drilling program as instructed by client which included Directional drilling, Running of casing from Deck
and Derrick, Cement programs, Well testing and Completion programs.
Supervise the periodic maintenance program for the drilling dept.
Slip and Cut drilling line when required.
Monitor the Well conditions and take appropriate action in the event of influx/Emergency.
Direct picking up and laying down of Bottom hole assemblies and Tubular including keeping an accurate record of all
dimensions (Fish necks, Serial numbers, Lengths, Internal and External Diameters)
that Solid control equipment (Shakers, Augers, Centrifuges) are operated as required.
Record accurate Trip Sheets during running and pulling of tubulars in and out of the Well .
Complete The IADC report
Complete all Drilling calculations as required.
Assist with rig up, running and pulling of Riser and BOP’s.
Hold pre-tour safety meetings and Weekly HSE meetings.
Provide yearly assessments of junior crews.
2. 2
Driller Nov 2013 to Sept 2015
Assigned to the 7th Generation DrillshipTransocean Deepwater Asgard.
Duties included operating The Aker Drilling systemthat included the MDDM1250 Top drive and Aker Wirth Mud pumps.
Perform the daily drilling program as instructed by client which included Directional drilling, Running of casing from Deck
and Derrick, Cement programs, Well testing and Completion programs.
Supervise the periodic maintenance program for the drilling dept.
Slip and Cut drilling line when required.
Monitor the Well conditions and take appropriate action in the event of influx/Emergency.
Direct picking up and laying down of Bottom hole assemblies and Tubular including keeping an accurate record of all
dimensions (Fish necks, Serial numbers, Lengths, Internal and External Diameters).
Ensure that Solid control equipment (Shakers, Augers, Centrifuges) are operated as required.
Record accurate Trip Sheets during running and pulling of Tubulars in and out of the Well.
Complete The IADC report.
Complete all Drilling calculations as required.
Assist with rig up, running and pulling of Riser and BOP’s.
Hold pre-tour safety meetings and Weekly HSE meetings.
Provide yearly assessments of junior crews.
Tourpusher Jan 2012 to Nov 2013
Assigned to Transocean Development Pool as Tourpusher.
Duties included providing the Driller with Standing instructions for the daily drilling program.
Be the responsible person for all drilling related Permits to work.
Supervise the maintenance program and repair of all drilling equipment.
Maintain records of inspections and certification of drilling equipment, tools and tubular.
Oversee the correct operation and monitoring of the mud mixing systems onboard.
Provide yearly assessments ofjunior crews.
Assist Barge dept with running and retrieval of Rig mooring anchors.
Driller May 2007 to Jan 2012
Assigned as Driller to Transocean Sedco 706 and the Sovereign explorer.
Duties included Operating Varco H4 Top drives and National Mud pumps.
Supervise the periodic maintenance program for the drilling dept.
Perform the daily drilling program as instructed by client which included making up of Bottom hole assemblies, Directional
drilling, Running of casing from Deck and Derrick, Cement programs, Well testing and Completion programs.
3. 3
Supervise the periodic maintenance program for the drilling dept.
Monitor the Well conditions and take appropriate action in the event of influx/Emergency.
Direct picking up and laying down of Bottom hole assemblies and Tubular including keeping an accurate record of all dimensions
(Fish necks, Serial numbers, Lengths, Internal and External Diameters)
Ensure that Solid control equipment (Shakers, Augers, Centrifuges) is operated as required.
Slip and Cut drill line when required.
Record accurate Trip Sheets during running and pulling of Tubulars in and out of the Well.
Complete The IADC report.
Assist Barge department with running and retrieval of Rig mooring anchors.
Complete all Drilling calculations as required.
Assist with rig up, running and pulling of Riser and BOP’s.
Hold pre-tour safety meetings and weekly HSE meetings.
Provide yearly assessments ofjunior crews.
Assistant Driller Oct 2005 to May 2007
Assigned to the Transocean Sovereign Explorer.
Duties included maintaining accurate records of all tubular and Bottom hole assemblies.
Assist with the organization of picking up and laying down of Down hole tools and tubular.
Keep an accurate inventory of all Company owned Tubulars, Subs and Stabilizers.
Supervise the Drill crew during daily operations.
Operate the Maritime Hydraulic Vertical Pipe Racking System.
Calculate and keep an accurate record of the Ton-Miles and assist with organizing of Slip and Cut of Drilling line.
Carry out Daily Checks on Drilling equipment, Safety equipment, Choke and Kill manifold line up, DROPS inspections.
Assist the Driller with operating of Drilling equipment, accurate recording of Drilling logs and Drilling calculations.
Supervise the operation of the Mud and solids control equipment.
Assist with running of Casing and Cement programs.
Assist with rig up, running and pulling of Riser and BOP’s.
Supervise the Preventative maintenance program on Drilling equipment.
Ensure that all Bottom Hole Assemblies are entered into GMS reporting system.
Derrickman July 2004 to Oct 2005
Assigned to Transocean Sovereign explorer.
Duties included operation of Maritime Hydraulic Vertical Pipe Handling System.
Monitoring all drilling fluids onboard.
Build drilling fluids as instructed by Mud engineer.
Ensure correct operation of both Mixing and Solids control systems.
4. 4
Roustabout/Floorman Feb 1995 to July 2004
Assigned to Sovereign Explorer, Drill star, John Shaw, Paul B Lloyd jnr.
Steel worker 1987 to 1992
British Steel Ravenscraig works Motherwell
..
Education
Lloyds Training 1993 to 1994
Gained City and Guild plumbing, Heating and ventilation certification.
Coatbridge High School 1982 to 1987
Gained Scottish O’grade Physics and O’grade Arithmetic
Industry Training
IADC WellcapWell Control;SurfaceandSubsea Supervisorlevel.
BOSIET OPITO WaterSurvival /HelicopterUnderwater Egress Trainingcertificate
OffshorelifeboatCoxswain
H2S Awareness Training
Well Construction
Deepwater Well Control
Subsea downtimeprevention
MajorEmergency Management
STCW Basic Safety Training
Aker Drilling-Operating
Aker Chairoperator
Aker Compensationsystem
Aker HumanMachineInterface