1. Corrie
Jordaan
+2781 872 9331 / +2760 928 1856
corriejordaan1968@gmail.com
ㅡ
Skills
(CO2) and arc welding
Worked as a roll grinder and mechanical fitter
Intensive Mechanical Knowledge of the Following
● Hitachi face solves an excavator 2500 and 2600
● Hitachi Excavator 870, 670, 520
● Cat Dozer D11, D10, D9
● Cat Grader 16G
● ADT Volvo A40, A35
● Cat Front end Loader 966H, 950H, 938G
● Hitachi Excavator 2500, 1900, 1200, 870, 670, 520 an 230
● Cat Dozer D11, D10, D9, D8, D6
● Cat Grader 14 and 16 series
● Cat Dump Truck 785 an 777
● ADT Volvo A40, A35 an A30
● John Deere engines 6081,6068,4045
● Perkins engines 1006
● Detroit diesel 6v71,671,471
● Servicing ,repair, and fault finding of all the above types
● KSB pumps model 250/50, 250/40 , 200/50
● Andrag pumps uv150ms , uv150mh , uv150mr
● CPP pumps
2. ● Sykes pumps
● Hazelton vertical spindle pumps
● Rocktuff vacuum pumps 25 cfm
ㅡ
Work
Experience
From 2017 up to date doing contract work in Africa
Maintenance fitter (mechanical)
Hitachi Marcsite
Hitachi face solves an excavator 2500 and 2600
From august 2014 up to 2016
Duties
Do maintenance and services on all of the above equipment
Maintenance fitter (mechanic)
Benicon mining
Hitachi Excavator 870, 670, 520
Cat Dozer D11, D10, D9
Cat Grader 16G
ADT Volvo A40, A35
Cat Front end Loader 966H, 950H, 938G
2012 – August2014
Duties
Do maintenance services an repair’ s on all above
Maintenance fitter (mechanic)
Mega cube mining
Hitachi Excavator 2500, 1900, 1200, 870, 670, 520 an 230
Cat Dozer D11, D10, D9, D8, D6
Cat Grader 14 and 16 series
Cat Dump Truck 785 an 777
ADT Volvo A40, A35 an A30
2009 –- 2012
Duties
Do maintenance and services on all of the above equipment
Mechanical Fitter –
Optimum Colliery
Dewatering pumps
John Deere engines 6081,6068,4045
Perkins engines 1006
Detroit diesel 6v71,671,471
3. Servicing ,repair, and fault finding of all the above types
KSB pumps model 250/50, 250/40 , 200/50
Andrag pumps uv150ms , uv150mh , uv150mr
CPP pumps
Sykes pumps
Hazelton vertical spindle pumps
Rocktuff vacuum pumps 25 cfm
Hippo submersible pumps
January 2007 September 2008
Duties
Welding and metal forming
Spray painting
Repairs to pneumatic tools and compressors
Routine maintenance and corrective maintenance
Artisan
Columbus Stainless
Middelburg Mpumalanga, RSA
1996– - 2006
Duties
Start as a refractory mason
Work with risk control. Obtained experience as safety
representative and done OHSMAN training.
Familiarise myself with the OHS act
Worked as a roll grinder and mechanical fitter
Qualified as mechanical fitter in December 2005 (adult training
program)
Preventative and breakdown maintenance on all equipment
associated with stainless steel smelters (rolling plant)
Stand in as acting foreman for 2 years
Done various computer courses
Typical work involved replacing bearings, conveying rollers,
hydraulic pumps and valves, replacing pneumatic equipment,
replacing conveyor belts, tracking of conveyor belts, repairs to
gas burners, replacing guides on conveying lines, fault finding
on above mentioned equipment.
General welding and cutting when required
Handyman
Subcontract , RSA
Sub contract
1994 - –1996
Duties
Was involved in building materials, shopping centers for
construction selection
Produce steel constructions and steal forms
4. Education
Do inside and outside house reparations
Install cabinets, counters, rakes, dry walls and ceilings
Done boiler making and welding work.
Renovating houses and offices
Measuring out and peg down foundations for new houses
Refractory mason
J.R Dickenson - Vereeniging
1992-1993
Duties
Done work at different company’ s Mosgas, Sasol, Natref, Shell,
Yskor, Rustenburg plats an Transvaal Alloys
Rebuild stacks
Rebuild and replace induction furnaces
Repairs to induction furnaces cooling plants
Installation and commissioning of new furnaces in steel and
stainless steel smelters
Apprenticeship
Yskor Pretoria
1988-1992
Duties
Complete apprenticeship with A and B symbols
Qualified in 1991 as a refractory mason.
Retrenched in 1992 (staff redundancy)
Rebuild submersible arc induction furnaces
Reline metal transport crucibles
Repairs to metal structures on crucibles and induction furnaces
as preparation before refractory work was done
Done mig (CO2) and arc welding
Used angle grinders and oxy acetylene for cutting
HTS Tom Naude Pietersburg, RSA
Passed Grade 12 with and N3 in Building Construction
Subjects
Afrikaans First language
English Second Language
Building Construction
Technical drawings
Functional Mathematics
Functional physical science and chemistry
5. Courses done Introductory leadership development program
Health risk identification
Health and Safety representative course
General Health and Safety
Advanced Health and Safety Training Course
Emergency care
Forklift license
Overhead crane license
Fire training course
Samtrac
Ms excel 2000
Introduction to Pc’ s using Windows 2000
Windows 95 course
Ms word 2000 level 1 First aid
Completed Course one and two of financial life skills training
-References can be given on Request-