1. Oficinade proyectos para diseñoe ingenieríade plataformas marinas y ductos submarinos
Senior Process Engineer-(1900630)
TYPICAL EXPERIENCE EDUCATION
6+ yrs in oil and gas with major contractor or consultantpredominantly performingdetail design of offshore
facilities
Bachelor Degree in Chemical Engineering (Master Degree is Preferred)
BASIC FUNCTIONS
- Perform conceptual,FEED, Studies, and detailed analyses and design as per design basis,project
specifications,design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accuratedetailed design calculationsand analyses includingdesign reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicateand explain complex issues and work to establish understanding.
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scopeof work, specifications,scheduleand all inter-discipline
requirements; includingidentifyingconcerns as early as practicableand takingappropriateinitiatives
to address the issues.
- Identify changes to scopeand promptly raisechangenotifications,includingprovidingany
necessary supportingdocumentation and estimates. Provide similar supportfor Variation Orders .
Interface with all disciplinesto develop clash free designs.
Interface with other departments to obtain input for Disciplinedesigns and drawings.
Maintain closeco-ordination with other engineering disciplines,Planning,Fabrication,Marine,and Project
Management Team, as required .
Document substantivecommunications (communicationsthatresultin significantdecisions or assignment
of actions) and forward copies to DisciplineLead Engineer and DisciplineManager.
Assistin preparation of estimates for bid proposals,includingtechnical query reviews, execution statements
and manhour estimates.
Raisetechnical queries to obtain missinginformation,clarify work scope, and to maintain preferred
McDermott procedures, specifications,standards,practices and operational requirements.
Prepare Disciplineengineeringdesign basis,philosophies,and technical specifications,as required.
Participatein finalizingdeliverableslists and deliverables,ensuringcompliancewith specificationsand
functional integrity.
2. - Attend projectreview meetings, vendor meetings, engineering meetings and offshoresite surveys,
as required.
- Provide technical direction and reviewof Designers producingproducts related to Process
Engineering .
- Prepare and review design reports and procedures .
- Assistin providingnecessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assistprocurement personnel in procuringDisciplineequipment, materials and services;ensuring
that work produced complies with Customer objectives and procedures. Procurement assistanceincludes
preparingand reviewing requisitions,evaluatingtechnical quotations and preparingqueries,compilingbid
tabulations and recommendations,preparingpurchaserequisitions,and coordinatingwith Procurement to
expedite vendor documents, as directed by DisciplineLead Engineer.
- Assistin updatingweight report based on receipt of vendor information.
- Check engineering performed by others within Discipline.
- Review vendor and subcontractor submittals,checkingfor compliancewith projectspecifications
and providingcomments as necessary.
- Perform design verification through single-disciplinecheck I inter-disciplinecheck (IDC).
- Provide technical supportto all fabrication queries,includingidentifyingdefect I rectification
requirements.
- Keep the Lead Engineer apprised of all activities and concerns,technical,budgetary and manpower
related.
Assistin providinginputs for actual,planningand forecastingprogress reports includingassociated
productivity.
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Participatein internal,Customer and third party technical audits on engineering deliverables and vendor
documents .
AssistLead Engineer with responses to Customer and other agencies (such as certifyingauthorities, auditors,
third parties,etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's K.now system.
Act as a resourcefor colleagues with less experience.
Guide less experienced engineers on MDR and Disciplineprocedures,standards,worksheets,design
calculations,software,requisitions,technical bid evaluations,technical queries,etc.
Be aware of costs related to own work and of the discipline.
3. Responsiblefor preparingI checkingthe followingkey deliverables,applicableas per the Projectscope:
o Process simulations I heatand material balance.
o Process flowdiagrams (PFD).
o Pipingand instrument diagrams/mechanical flowdiagrams (P&ID/MFD) .
o SAFE charts.
o Process safeguardingdiagram.
o Equipment and instrument process datasheets.
o Process specifications.
o Operating philosophy and startup and operatingmanuals.
o Equipment list(process data).
o Line list(process data).
o Flareradiation and dispersion calculations.o Depressurization and flarenetwork study.
o Equipment and linesizingcalculations.
o Fluid lists.
o Process studies.
Review process information in supplier/vendor data for conformance with project requirements.
- Provideprocess assistanceto other disciplines by performing IDC I providinginputs as
required for the followingactivities:
0 Layout review
0 Area classification drawings
0 Safety studies
0 Electrical load list
0 Equipment datasheets
0 Instrument datasheets
0 ESD and F&G logic diagrams and control narratives.
- Provide technical co-ordination with outsideagencies for third party studies.
- Provide assistanceto precommissioningand commissioningon process related sitequeries.
- Assistin closeoutof HAZOP action items.
4. Senior Instrumentation Engineer-(1900610)
TYPICAL EXPERIENCE EDUCATION
6+ yrs in oil and gas with major contractor or consultant predominantly performingdetail design of offshore
facilities
Bachelor Degree in Chemical,Electrical,or Electronics and Instrumentation Engineering
REPORTS TO:
Project: Lead Engineer
Functional:SupervisingEngineer or Engineering Manager
Strong workingknowledge of many design techniques and analysis methods,and detailed knowledge of the
content and application of standards,codes and guidelines as applicablefor offshore.
SUPERVISES: OTHER
Automation & Instrumentation Engineers
Preferably Registered Professional Engineer or member of professional engineeringsociety
LIAISE WITH:
All Engineering disciplines, Fabrication Group,Safety Dept, Offshore Group, Document Control,
Procurement Group, Subcontractors and Vendors, and Customers.
BASIC FUNCTIONS
- Perform conceptual,FEED, Studies, and detailed analyses and design as per design basis,
project specifications,design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accuratedetailed design calculationsand analyses includingdesign reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term
work activities in own area.
- Clearly communicateand explain complex issues and work to establish understanding.
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scopeof work, specifications,scheduleand all inter-
disciplinerequirements; includingidentifyingconcerns asearly as practicableand takingappropriate
initiativesto address the issues.
- Identify changes to scopeand promptly raisechangenotifications,includingprovidingany
necessary supportingdocumentation and estimates. Provide similar supportfor Variation Orders .
- Interface with all disciplines to develop clash freedesigns.
- Interface with other departments to obtain inputfor Disciplinedesigns and drawings.
- Maintain closeco-ordination with other engineering disciplines,Planning,Fabrication,Marine,and
Project Management Team, as required.
5. - Document substantivecommunications (communicationsthatresultin significantdecisionsor
assignmentof actions) and forward copies to DisciplineLead Engineer and DisciplineManager.
- Assistin preparation of estimates for bid proposals,includingtechnical query reviews , execution
statements and manhour estimates.
- Raisetechnical queries to obtain missinginformation,clarify work scope,and to maintain preferred
McDermott procedures, specifications,standards,practices and operational requirements.
- Prepare Disciplineengineeringdesign basis,philosophies,and technical specifications,as required.
- Participatein finalizingdeliverables lists and deliverables,ensuringcompliancewith specifications
and functional integrity.
- Attend projectreview meetings, vendor meetings, engineering meetings and offshoresite surveys,
as required.
- Provide technical direction and reviewof Designers producing products related to Automation &
Instrumentation Engineering.
- Prepare and review design reports and procedures.
- Assistin providingnecessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assistprocurement personnel in procuringDisciplineequipment, materials and services;ensuring
that work produced complies with Customer objectives and procedures. Procurement assistanceincludes
preparingand reviewing requisitions,evaluatingtechnical quotations and preparingqueries,compilingbid
tabulations and recommendations,preparingpurchaserequisitions,and coordinatingwith Procurement to
expedite vendor documents, as directed by DisciplineLead Engineer .
- Assistin updatingweight report based on receipt of vendor information.
- Check engineering performed by others within Discipline.
- Review vendor and subcontractor submittals,checkingfor compliancewith projectspecifications
and providingcomments as necessary.
- Perform design verification through single-disciplinecheck I inter-disciplinecheck (IDC).
- Provide technical supportto all fabrication queries,includingidentifyingdefect I rectification
requirements.
- Keep the Lead Engineer apprised of all activities and concerns,technical,budgetary and manpower
related.
Assistin providinginputs for actual,planningand forecastingprogress reports includingassociated
productivity .
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
6. Participatein internal,Customer and third party technical audits on engineering deliverables and vendor
documents.
AssistLead Engineer with responses to Customer and other agencies (such as certifyingauthorities,auditors,
third parties,etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's K.now system.
Act as a resourcefor colleagues with less experience.
Guide less experienced engineers on MDR and Disciplineprocedures,standards,worksheets,design
calculations,software,requisitions,technical bid evaluations,technical queries,etc.
Be aware of costs related to own work and of the discipline.
Prepare I review automation system definition,includingphilosophy,specifications,safety drawings,and
system architecture.
Prepare I review ESD logic (as applicable)lcause-&-effect diagrams and F&Glogic (as applicable)lcause-&-
effect diagrams .
Prepare I update I review specificationsand data sheets for Automation and Instrumentation equipment.
Prepare I review A&l equipment spareparts lists.
Prepare I review inputs to P&ID development and markups based on receipt of vendor information.Review
A&l equipment testing procedures.
Attend A&l equipment FATs, as required.Assistin closeoutof HAZOP action items
7. Senior Principal Electrical Designer- (1900646)
TYPICAL EXPERIENCE EDUCATION
14 years min with major contractor or consultant of which 9+ years of
experience in predominately offshore oil and gas
High School graduate with a diploma in Civil, Electrical or Mechanical
Design, or Drafting in a related discipline or equivalent experience
BASIC FUNCTIONS
- Prepare and develop arrangement and detail conceptual, FEED,
studies, and detail design drawings of high technical quality and
professional consistent presentation ensuring clarity and ease of
construction.
- Develop 3D models and ensure clash free with all other disciplines.
- Ensure design deliverables are completed and issued per project
specifications, MDR and project Level 2 & 3 procedures, and within agreed
schedules and budgets.
- Apply knowledge and/or skills to perform complex work.
- Set priorities, organize own work and time to meet objectives, and
(as Lead Designer) foreca st and plan resource requirements.
- W hen acting as Lead Designer, in addition:
o Direct large Electrical Design team as Lead Designer.
o Lead projects as Lead Designer engaging the participation of other
disciplines. Coordinate all activities within own discipline and Discipline
interfaces with other disciplines.
o Lead the design team of the assigned work area and
complete within planned schedule and budget, in accordance with
standards, MDR and project-specific procedures and to a high professional
standard.
o Plan, organize and direct all aspects of Discipline
execution on the assigned project including scope, deliverables, schedule
8. and all Discipline manpower resources - agree allocations with the
Engineering Manager.
o Ensure interfaces and deliverables are clearly identified.
o Maintain responsibility for progress and productivity, identifying
any required corrective action.
o Act as project-based Discipline point of contact in communications
and meetings with Project Team, Customer, vendor/supplier and/or
subcontractor counterparts; and relevant agencies such as certifying
authorities, auditors , third parties, etc.
- When acting as Design Coordinator:
o Coordinate large Design team as Design Coordinator.
o Coordinate project Design interdisciplinary activities to ensure
timely and organized distribution of information amongst all Lead
Designers .
o Ensure interfaces and deliverables are clearly identified.
TASKS & RESPONSIBILITIES
- Become fully familiar with the Contract Scope of Work,
specifications, schedule and all inter
discipline requirements ; including identifying concerns as early as
practicable and taking appropriate
initiatives to address the issues.
- Identify changes to scope and promptly raise change notification
in the Change Management system, including providing any necessary
supporting documentation and estimates. Provide similar support for
Variation Orders .
- Interface with all disciplines to develop clash free designs.
9. - Interface with other disciplines to obtain input for Discipline
designs and drawings.
- Liaise with other discipline support groups to ensure clearly
defined interfaces, deliverables and schedules are met.
- Document substantive communications (communications that
result in significant decisions or assignment of actions), and forward copies
to Discipline Lead Designer and Discipline Supervisor.
- Assist Discipline Lead Designer in preparing estimates for
proposals and job scope changes, including execution statements , work
schedules, and manhour requirements, identifying software
requirements and any other project-specific requirements.
Raise technical queries to obtain missing information, clarify work scope,
and to maintain preferred McDermott procedures,
specifications, standards, practices and operational requirements .
Participate in finalizing deliverables lists, deliverables and philosophies to
ensure compliance with specifications and functional integrity.
Review project schedule and fabrication schedule in relation to
construction sequence, milestones, and design scope.
Attend project kickoff and review meetings, vendor/supplier meetings,
engineering and design meetings and offshore site surveys as required.
Research Customer standards and procedures in order to prepare project-
specific design procedures and standards for submission to the Customer
for approval.
Set up and maintain the Discipline Master design drawing and document
files. Develop and maintain project job books.
10. Prepare and review Discipline deliverables such as: o 3D model
o Detailed design drawings
- Develop conceptual layouts based on experience and good
offshore engineering practice & develop these through detail design.
- Assist the Lead Designer in supervising the preparation of key
Discipline drawings.
- Liaise with the responsible Engineers for the timely expediting of
Vendor Data to efficiently progress the project according to schedule
requirements .
- Review drawings issued by other disciplines and incorporate the
required data into Discipline drawings.
- Review vendor drawings and documents and incorporate required
vendor data into Discipline drawings and documents .
- Assist in providing necessary design inputs to other disciplines to
enable them in proceeding with their deliverables .
- Generate IDCdesign documentation for the project.
- Perform design verification through single discipline checks (SDC)
and/or inter-discipline checks (IDC), providing comments to Lead Designer.
- Review all project IDCdesign documentation for detail technical
interfaces.
- Maintain single discipline and inter-discipline check drawings and
filing, including final archiving.
- Assist Fabrication as required in the resolution of construction
difficulties relating to design
11. o Supervise and guide assigned Designers for Discipline design and
design deliverables .
o Ensure Designers assigned to the project execute assigned tasks in
a consistent manner.
o Prepare working forecasts identifying change management plans,
corrective action and real time schedule.
o Provide Discipline inputs for actual, planning and forecasting
progress reports including associated productivity.
o Alert project team of any deviation from the scope or a need for
change order.
o Monitor KPI measurement results, and take corrective action as
necessary to improve Discipline performance, including performance at
interfaces with others.
o Coordinate with other disciplines' Lead Designers to ensure timely
receipt of necessary design inputs.
o Ensure Discipline Designers have sufficient input information for
the drawing or model being undertaken.
o Raise and approve technical queries to obtain missing information,
clarify work scope , and to maintain preferred McDermott procedures,
specifications, standards, practices and operational requirements.
o Review and approve Discipline project:
• Schedules
• Execution plans
12. • Deliverables lists
• Deliverables
• Forecasts
• Estimates
• Progress and productivity reports
• Procedures
• MTOs
• Single discipline checks (SDC) I inter-discipline checks (IDC)
o Review comments from Customers & other agencies on
documents and drawings produced by the team , and resolve and give
guidance on their update and incorporation.
o Lead the Discipline team during project audits (internal, Customer
and third party technical audits) and Design Reviews.
o Assist Discipline Supervisor I Engineering Manager in the
preparation of quarterly forecasts and manpower planning.
13. Principal Electrical Designer- (1900715)
TYPICAL EXPERIENCE EDUCATION
10 years min with major contractor or consultantof which 9+ years of experience in predominately offshore
oil and gas
High School graduatewith a diploma in Civil,Electrical or Mechanical Design,or Draftingin a related
disciplineor equivalentexperience
BASIC FUNCTIONS
- Prepare and develop arrangement and detail conceptual,FEED, studies,and detail design drawings
of high technical quality and professional consistentpresentation ensuringclarity and easeof construction.
- Develop 3D models and ensure clash freewith all other disciplines.
- Ensure design deliverables arecompleted and issued per projectspecifications,MDR and project
Level 2 & 3 procedures,and within agreed schedules and budgets.
- Apply knowledge and/or skillsto perform complex work.
- Set priorities,organizeown work and time to meet objectives,and (as Lead Designer) foreca st and
plan resourcerequirements.
- W hen actingas Lead Designer, in addition:
o Direct largeElectrical Design team as Lead Designer.
o Lead projects as Lead Designer engaging the participation of other disciplines.Coordinateall
activities within own disciplineand Disciplineinterfaces with other disciplines.
o Lead the design team of the assigned work area and complete within planned scheduleand
budget, in accordancewith standards,MDR and project-specific procedures and to a high professional
standard.
o Plan,organize and directall aspects of Disciplineexecution on the assigned projectincluding
scope, deliverables,scheduleand all Disciplinemanpower resources - agree allocations with the Engineering
Manager.
o Ensure interfaces and deliverables areclearly identified.
o Maintain responsibility for progress and productivity,identifyingany required corrective action.
o Act as project-based Disciplinepointof contact in communications and meetings with ProjectTeam,
Customer, vendor/supplier and/or subcontractor counterparts;and relevant agencies such as certifying
authorities,auditors ,third parties,etc.
- When actingas Design Coordinator:
o Coordinate largeDesign team as Design Coordinator.
o Coordinate projectDesign interdisciplinary activities to ensure timely and organized distribution of
information amongst all Lead Designers .
o Ensure interfaces and deliverables areclearly identified.
TASKS & RESPONSIBILITIES
- Become fully familiar with the Contract Scope of Work, specifications,scheduleand all inter
disciplinerequirements ; includingidentifyingconcerns asearly as practicableand takingappropriate
14. initiativesto address the issues.
- Identify changes to scopeand promptly raisechangenotification in theChange Management
system, includingprovidingany necessary supportingdocumentation and estimates. Providesimilar support
for Variation Orders .
- Interface with all disciplines to develop clash freedesigns.
- Interface with other disciplines to obtain inputfor Disciplinedesigns and drawings.
- Liaisewith other disciplinesupportgroups to ensure clearly defined interfaces, deliverables and
schedules aremet.
- Document substantivecommunications (communicationsthatresultin significantdecisionsor
assignmentof actions),and forward copies to DisciplineLead Designer and DisciplineSupervisor.
- AssistDisciplineLead Designer in preparingestimates for proposals and job scopechanges,including
execution statements , work schedules,and manhour requirements, identifyingsoftware
requirements and any other project-specific requirements.
Raisetechnical queries to obtain missinginformation,clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards,practices and operational requirements .
Participatein finalizingdeliverableslists,deliverables and philosophies to ensure compliancewith
specifications and functional integrity.
Review project scheduleand fabrication schedulein relation to construction sequence, milestones,and
design scope.
Attend project kickoff and review meetings, vendor/supplier meetings, engineering and design meetings and
offshore sitesurveys as required.
Research Customer standards and procedures in order to prepare project-specific design procedures and
standards for submission to the Customer for approval.
Set up and maintain the DisciplineMaster design drawingand document files.Develop and maintain project
job books.
Prepare and review Disciplinedeliverables such as:o 3D model
o Detailed design drawings
- Develop conceptual layouts based on experience and good offshore engineering practice& develop
these through detail design.
- Assistthe Lead Designer in supervisingthepreparation of key Disciplinedrawings.
- Liaisewith the responsibleEngineers for the timely expediting of Vendor Data to efficiently progress
the project accordingto schedulerequirements .
- Review drawings issued by other disciplines and incorporatethe required data into Discipline
drawings.
15. - Review vendor drawings and documents and incorporaterequired vendor data into Discipline
drawings and documents .
- Assistin providingnecessary design inputs to other disciplines to enable them in proceeding with
their deliverables .
- Generate IDC design documentation for the project.
- Perform design verification through singledisciplinechecks (SDC) and/or inter-disciplinechecks
(IDC), providingcomments to Lead Designer.
- Review all projectIDC design documentation for detail technical interfaces.
- Maintain singledisciplineand inter-disciplinecheck drawings and filing,includingfinal archiving.
- AssistFabrication as required in the resolution of construction difficulties relatingto design
o Supervise and guide assigned Designers for Disciplinedesign and design deliverables .
o Ensure Designers assigned to the projectexecute assigned tasks in a consistentmanner.
o Prepare working forecasts identifyingchangemanagement plans,correctiveaction and real time
schedule.
o Provide Disciplineinputs for actual,planningand forecastingprogress reports includingassociated
productivity.
o Alert projectteam of any deviation from the scope or a need for change order.
o Monitor KPI measurement results,and take correctiveaction as necessary to improve Discipline
performance, includingperformanceatinterfaces with others.
o Coordinate with other disciplines'Lead Designers to ensure timely receipt of necessary design
inputs.
o Ensure DisciplineDesigners havesufficientinputinformation for the drawingor model being
undertaken.
o Raiseand approve technical queries to obtain missinginformation,clarify work scope, and to
maintain preferred McDermott procedures, specifications,standards,practices and
operational requirements.
o Review and approve Disciplineproject:
• Schedules
• Execution plans
• Deliverables lists
• Deliverables
16. • Forecasts
• Estimates
• Progress and productivity reports
• Procedures
• MTOs
• Singledisciplinechecks (SDC) I inter-disciplinechecks (IDC)
o Review comments from Customers & other agencies on documents and drawings produced by the
team , and resolveand give guidanceon their update and incorporation.
o Lead the Disciplineteam duringproject audits (internal,Customer and third party technical audits)
and Design Reviews.
o AssistDisciplineSupervisor I EngineeringManager in the preparation of quarterly forecasts and
manpower planning.
17. Senior Structural Designer-(1900644)
TYPICAL EXPERIENCE EDUCATION
7 years min with major contractor or consultantof which 5+ years of experience in predominately offshore
oil and gas
High School graduatewith a diploma in Civil,Electrical or Mechanical Design,or Draftingin a related
disciplineor equivalentexperience
BASIC FUNCTIONS
- Prepareand develop arrangement and detail conceptual,FEED, studies,and detai l design
drawings of high technical quality and professional consistentpresentation ensuringclarity and easeof
construction.
- Develop 3D models and ensure clash freewith all other disciplines.
- Ensure design deliverables arecompleted and issued per project specifications,MDR and
project Level 2 & 3 procedures, and within agreed schedules and budgets.
- apply knowledge and/or skillsto a range of activities .
- Set priorities,organizeown work and time to meet objectives,and (as Lead Designer) forecastand
plan resourcerequirements.
- When actingas Lead Designer, in addition:
0 Direct small or medium Structural Design team as Lead Designer.
o Lead projects as Lead Designer engaging the participation of other disciplines.Coordinateall
activities within own disciplineand Disciplineinterfaces with other disciplines.
o Lead the design team of the assigned work area and complete within planned scheduleand budget,
in accordancewith standards,MDR and project-specific procedures and to a high professional standard.
o Plan,organizeand directall aspects of Disciplineexecution on the assigned projectincludingscope,
deliverables,scheduleand all Disciplinemanpower resources - agree allocations with the Engineering
Manager.
o Ensure interfaces and deliverables areclearly identified .
o Maintain responsibility for progress and productivity, identifyingany required corrective action.
o Act as project-based Disciplinepointof contact in communications and meetings wit h ProjectTeam,
Customer, vendor/supplier and/or subcontractor counterparts;and relevant agencies such as certifying
authorities,auditors,third parties,etc.
TASKS & RESPONSIBILITIES
- Become fully familiar with the Contract Scope of Work, specifications,scheduleand all inter
disciplinerequirements; includingidentifyingconcerns asearly as practicableand takingappropriate
initiativesto address the issues.
- Identify changes to scopeand promptly raisechangenotification in theChange Management
system, includingprovidingany necessary supportingdocumentation and estimates. Providesimilar support
for Variation Orders.
- Interface with all disciplines to develop clash freedesigns.
18. - Interface with other disciplines to obtain inputfor Disciplinedesigns and drawings.
- Liaisewith other disciplinesupportgroups to ensure clearly defined interfaces,deliverables and
schedules aremet.
- Document substantivecommunications (communicationsthatresultin significantdecisionsor
assignmentof actions),and forward copies to DisciplineLead Designer and DisciplineSuperv isor.
- AssistDisciplineLead Designer in preparingestimates for proposals and job scopechanges,
includingexecution statements, work schedules,and manhour requirements, identifyingsoftware
requirements and any other project-specific requirements.
- Raisetechnical queries to obtain missinginformation,clarify work scope,and to maintain preferred
McDermott procedures, specifications, standards,practices and operational requirements .
- Participatein finalizingdeliverables lists,deliverables and philosophies to ensure compliancewith
specifications and functional integrity .
- Review projectschedule and fabrication schedulein relation to construction sequence,
milestones,
and design scope.
- Attend projectkickoff and review meetings, vendor/supplier meetings, engineering and design
meetings and offshore site surveys as required.
- Research Customer standards and procedures in order to prepare project-specific design procedures
and standards for submission to the Customer for approval.
- Set up and maintain the DisciplineMaster design drawingand document files.
- Develop and maintain projectjob books.
- Prepare and review Disciplinedeliverables such as:
o 3D model
o Detailed design drawings
Develop conceptual layouts based on experience and good offshoreengineering practice& develop these
through detail design.
Assistthe Lead Designer in supervisingthe preparation of key Disciplinedrawings.
Liaisewith the responsibleEngineers for the timely expediting of Vendor Data to efficiently progress the
project accordingto schedulerequirements.
Review drawings issued by other disciplines and incorporatethe required data into Disciplinedrawings.
Review vendor drawings and documents and incorporaterequired vendor data into Disciplinedrawings and
documents.
Assistin providingnecessary design inputs to other disciplines to enablethem in proceeding with their
deliverables.
19. Identify all items for which insufficientdata is availableto allowthe drawingor model to be
completed (HOLDS), and listthese on the drawingand on the standard 'HOLDS' listform.Notify the
DisciplineLead Designer when there are updates to the Holds list.
Generate IDC design documentation for the project.
Perform design verification through singledisciplinechecks (SOC) and/or i nter-disciplinechecks (IDC),
providingcomments to Lead Designer.
Review all projectIDC design documentation for detail technical interfaces.
Maintain singledisciplineand inter-disciplinecheck drawings and filing,includingfinal archiving.Prepare,
issueand update material and weight data take-offs .
AssistFabrication asrequired in the resolution of construction difficulties relatingto design problems,
clashes,etc.
Monitor progress and maintain the deliverables register on an ongoingbasis.
- Ensure compliancewith the ProjectExecution Plan and the timely completion and archivingof
drawings and documents.
- Keep Lead Designer apprised of all activities,progress and concerns,includingmanpower and
budgetary related.
- Assistin providinginputs for actual,planningand forecastingprogress reports includingassociated
productivity.
- Prepare forecastingschedules of delayed deliverables.
- Advise the Lead Designer of problem areas and/or manpower concerns.
- Report errors and suggest resolution for same.
- Participatein design reviews and audits .
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Capture Knowledge Objects and enter into MDR's K.now system .
- Act as a resource for colleagues with less experience.
- Act as a technical resourceto others in own Discipline.
- Guide less experienced Designers on MDR and Disciplineprocedures,standards,worksheets,design
calculations,software,technical queries,etc.
- Provide leadership,mentoring, and guidanceto others.
- Assistin the maintenance of departmental technical guidelines and standards .
- Participatein development and maintenance of Global Procedures,Software, Guidelines,and
Standards.
20. - Further develop understandingof MDR's business and processes .
- Identify and provide trainingto staff in specific techniques and proprietary software.
- Provide information on employee performance to the DisciplineSupervisor I EngineeringManager.
- AssistDisciplineSupervisor I EngineeringManager in interviewingjob applicants.
- Prepare I review and (as Lead Designer) approveStructural Design deliverables such as:
o 3D model Structural scopes
o General Structural Design instructions
o Jacket & TopsidePrimary steel drawings
o Jacket & TopsideSecondary steel drawings
o PileI Conductor drawings
o Bridge structural drawings.
o Flare/vent boom structural drawings
o Helideck structural drawings
o Structural drawings for Buildings and other structures
o Access platform drawings & Equipment support drawings
o Material handlingdrawingsand all appurtena ncedrawings.
o Seafastening drawings
o Installation/lift drawings
- Review vendor documents and providecomments for structura l support requirements.
- Participatein clash resolution meetings,as required.
- Provide technical guidanceto other designers for preparingstructural detail drawings.
- Travel to fabrication yard or offshoreto provideassistanceduringfabrication and/or installation,as
required.
- When actingas Lead Designer, in addition :
o Act as project-based Disciplinepointof contact in communications and meetings wit h
Customer, vendor/supplier and/or subcontractor counterparts;and Project Team .
o Ensure substantivecommunications aredocumented.
o Prepare bid's and project's Disciplinedesign budget and execution plans,updatingas required.
21. o Identify project staff needs based on knowledge of individual designer'sskill sets and provide
requests to the DisciplineSupervisor I EngineeringManager.
o Plan,organizeand assign tasks,responsibilities,and manhour budgets to the Disciplineteam, and
verify tasks are completed within budgets.
o Plan DisciplineLevel 4 detail deliverableschedule/ register compliantwith the overall execution
plan.
o Supervise and guide assigned Designers for Disciplinedesign and design deliverables.
o Ensure Designers assigned to the projectexecute assigned tasks in a consistentmanner.
o Prepare working forecasts identifyingchangemanagement plans,correctiveaction and real time
schedule.
o Provide Disciplineinputs for actual,planningand forecastingprogress reports including
associated productivity.
o Alert projectteam of any deviation from the scope or a need for change order .
o Monitor KPI measurement results,and take correctiveaction as necessar y to improve
Disciplineperformance, includingperformanceatinterfaces with others.
o Coordinate with other disciplines ' Lead Designers to ensure timely receipt of necessary
design inputs.
o Ensure DisciplineDesigners havesufficientinputinformation for the drawingor model being
undertaken.
o Raiseand approve technical queries to obtain missinginformation,clarify work scope,and to
maintain preferred McDermott procedures, specifications,standards,practices and operational
requirements.
o Review and approve Disciplineproject:
• Schedules
• Execution plans
• Deliverables lists
• Deliverables
• Forecasts
• Estimates
• Progress and productivity reports
• Procedures
22. • MTOs
• Singledisciplinechecks (SDC) I inter-disciplinechecks (IDC)
o Review comments from Customers & other agencies on documents and drawings produced by the
team, and resolveand give guidanceon their update and incorporation.
o Lead the Disciplineteam duringproject audits (internal,Customer and third party technical audits)
and Design Reviews.
o AssistDisciplineSupervisor I EngineeringManager in the preparation of quarterly forecasts and
manpower planning.
o Anticipate projectengineering needs and plan accordingly.
o AssistDisciplineSupervisor I EngineeringManager, and ProjectEngineering Manager or Project
Manager in Performance Evaluation of project team members.
o Coordinate with representatives from Fabrication and Marineto identify the construction sequence
and preferential design details.
o Ensure Structural item clashes identified in 3D model are addressed and resolved.
o Participatein 3D model reviews, and ensure Structural review comments are closed.o Travel
to fabrication yard or offshoreto provide assistanceduringfabrication
23. Principal Civil/Structural Designer- (1900643)
TYPICAL EXPERIENCE EDUCATION
10 years min with major contractor or consultantof which 5+ years of experience in predominately offshore
oil and gas
High School graduatewith a diploma in Civil, Electrical or Mechanical Design,or Draftingin a related
disciplineor equivalentexperience
BASIC FUNCTIONS
- Prepareand develop arrangement and detail conceptual,FEED, studies,and detail design
drawings of high technical quality and professional consistentpresentation ensuringclarity and easeof
construction.
- Develop 3D models and ensure clash freewith all other disciplines.
- Ensure design deliverables arecompleted and issued per project specifications,MDR and
project Level 2 & 3 procedures, and within agreed schedules and budgets.
- apply knowledge and/or skillsto a range of activities .
- Set priorities,organizeown work and time to meet objectives,and (as Lead Designer) forecastand
plan resourcerequirements.
- When actingas Lead Designer, in addition:
0 Direct small or medium Structural Design team as Lead Designer.
o Lead projects as Lead Designer engaging the participation of other disciplines.Coordinateall
activities within own disciplineand Disciplineinterfaces with other disciplines.
o Lead the design team of the assigned work area and complete within planned scheduleand budget,
in accordancewith standards,MDR and project-specific procedures and to a high professional standard.
o Plan,organizeand directall aspects of Disciplineexecution on the assigned projectincludingscope,
deliverables,scheduleand all Disciplinemanpower resources - agree allocations with the Engineering
Manager.
o Ensure interfaces and deliverables areclearly identified .
o Maintain responsibility for progress and productivity,identifyingany required corrective action.
o Act as project-based Disciplinepointof contact in communications and meetings wit h ProjectTeam,
Customer, vendor/supplier and/or subcontractor counterparts;and relevant agencies such as certifying
authorities,auditors, third parties,etc.
TASKS & RESPONSIBILITIES
- Become fully familiar with the Contract Scope of Work, specifications,scheduleand all inter
disciplinerequirements; includingidentifyingconcerns asearly as practicableand takingappropriate
initiativesto address the issues.
- Identify changes to scopeand promptly raisechangenotification in theChange Management
system, includingprovidingany necessary supportingdocumentation and estimates. Providesimilar support
for Variation Orders.
- Interface with all disciplines to develop clash freedesigns.
24. - Interface with other disciplines to obtain inputfor Disciplinedesigns and drawings.
- Liaisewith other disciplinesupportgroups to ensure clearly defined interfaces,deliverables and
schedules aremet.
- Document substantivecommunications (communicationsthatresultin significantdecisionsor
assignmentof actions),and forward copies to DisciplineLead Designer and DisciplineSuperv isor.
- AssistDisciplineLead Designer in preparingestimates for proposals and job scopechanges,
includingexecution statements, work schedules,and manhour requirements, identifyingsoftware
requirements and any other project-specific requirements.
- Raisetechnical queries to obtain missinginformation,clarify work scope,and to maintain preferred
McDermott procedures, specifications, standards,practices and operational requirements .
- Participatein finalizingdeliverables lists,deliverables and philosophies to ensure compliancewith
specifications and functional integrity .
- Review projectschedule and fabrication schedulein relation to construction sequence,
milestones,
and design scope.
- Attend projectkickoff and review meetings, vendor/supplier meetings, engineering and design
meetings and offshore site surveys as required.
- Research Customer standards and procedures in order to prepare project-specific design procedures
and standards for submission to the Customer for approval.
- Set up and maintain the DisciplineMaster design drawingand document files.
- Develop and maintain projectjob books.
- Prepare and review Disciplinedeliverables such as:
o 3D model
o Detailed design drawings
Develop conceptual layouts based on experience and good offshoreengineering practice& develop these
through detail design.
Assistthe Lead Designer in supervisingthe preparation of key Disciplinedrawings.
Liaisewith the responsibleEngineers for the timely expediting of Vendor Data to efficiently progress the
project accordingto schedulerequirements.
Review drawings issued by other disciplines and incorporatethe required data into Disciplinedrawings.
Review vendor drawings and documents and incorporaterequired vendor data into Disciplinedrawings and
documents.
Assistin providingnecessary design inputs to other disciplines to enablethem in proceeding with their
deliverables.
25. Identify all items for which insufficientdata is availableto allowthe drawingor model to be
completed (HOLDS), and listthese on the drawingand on the standard 'HOLDS' l istform.Notify the
DisciplineLead Designer when there are updates to the Holds list.
Generate IDC design documentation for the project.
Perform design verification through singledisciplinechecks (SOC) and/or inter-disciplinechecks (IDC),
providingcomments to Lead Designer.
Review all projectIDC design documentation for detail technical interfaces.
Maintain singledisciplineand inter-disciplinecheck drawings and filing,includingfinal archiving.Prepare,
issueand update material and weight data take-offs .
AssistFabrication asrequired in the resolution of construction difficulties relatingto design problems,
clashes,etc.
Monitor progress and maintain the deliverables register on an ongoingbasis.
- Ensure compliancewith the ProjectExecution Plan and the timely completion and archivingof
drawings and documents.
- Keep Lead Designer apprised of all activities,progress and concerns,includingmanpower and
budgetary related.
- Assistin providinginputs for actual,planningand forecastingprogress reports includingassociated
productivity.
- Prepare forecastingschedules of delayed deliverables.
- Advise the Lead Designer of problem areas and/or manpower concerns.
- Report errors and suggest resolution for same.
- Participatein design reviews and audits .
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Capture Knowledge Objects and enter into MDR's K.now system .
- Act as a resource for colleagues with less experience.
- Act as a technical resourceto others in own Discipline.
- Guide less experienced Designers on MDR and Disciplineprocedures,standards,worksheets,design
calculations,software,technical queries,etc.
- Provide leadership,mentoring, and guidanceto others.
- Assistin the maintenance of departmental technical guidelines and standards .
- Participatein development and maintenance of Global Procedures,Software, Guidelines,and
Standards.
26. - Further develop understandingof MDR's business and processes .
- Identify and provide trainingto staff in specific techniques and proprietary software.
- Provide information on employee performance to the DisciplineSupervisor I EngineeringManager.
- AssistDisciplineSupervisor I EngineeringManager in interviewingjob applicants.
- Prepare I review and (as Lead Designer) approveStructural Design deliverables such as:
o 3D model Structural scopes
o General Structural Design instructions
o Jacket & TopsidePrimary steel drawings
o Jacket & TopsideSecondary steel drawings
o PileI Conductor drawings
o Bridge structural drawings.
o Flare/vent boom structural drawings
o Helideck structural drawings
o Structural drawings for Buildings and other structures
o Access platform drawings & Equipment support drawings
o Material handlingdrawingsand all appurtena ncedrawings.
o Seafastening drawings
o Installation/lift drawings
- Review vendor documents and providecomments for structura l support requirements.
- Participatein clash resolution meetings,as required.
- Provide technical guidanceto other designers for preparingstructural detail drawings.
- Travel to fabrication yard or offshoreto provideassistanceduringfabrication and/or installation,as
required.
- When actingas Lead Designer, in addition :
o Act as project-based Disciplinepointof contact in communications and meetings wit h
Customer, vendor/supplier and/or subcontractor counterparts;and Project Team .
o Ensure substantivecommunications aredocumented.
o Prepare bid's and project's Disciplinedesign budget and execution plans,updatingas required.
27. o Identify project staff needs based on knowledge of individual designer'sskill sets and provide
requests to the DisciplineSupervisor I EngineeringManager.
o Plan,organizeand assign tasks,responsibilities,and manhour budgets to the Disciplineteam, and
verify tasks are completed within budgets.
o Plan DisciplineLevel 4 detail deliverableschedule/ register compliantwith the overal l execution
plan.
o Supervise and guide assigned Designers for Disciplinedesign and design deliverables.
o Ensure Designers assigned to the projectexecute assigned tasks in a consistentmanner.
o Prepare working forecasts identifyingchangemanagement plans,correctiveaction and real time
schedule.
o Provide Disciplineinputs for actual,planningand forecastingprogress reports including
associated productivity.
o Alert projectteam of any deviation from the scope or a need for change order .
o Monitor KPI measurement results,and take correctiveaction as necessar y to improve
Disciplineperformance, includingperformanceatinterfaces with others.
o Coordinate with other disciplines ' Lead Designers to ensure timely receipt of necessary
design inputs.
o Ensure DisciplineDesigners havesufficientinputinformation for the drawingor model being
undertaken.
o Raiseand approve technical queries to obtain missinginformation,clarify work scope,and to
maintain preferred McDermott procedures, specifications,standards,practices and operational
requirements.
o Review and approve Disciplineproject:
• Schedules
• Execution plans
• Deliverables lists
• Deliverables
• Forecasts
• Estimates
• Progress and productivity reports
• Procedures
28. • MTOs
• Singledisciplinechecks (SDC) I inter-disciplinechecks (IDC)
o Review comments from Customers & other agencies on documents and drawings produced by the
team, and resolveand give guidanceon their update and incorporation.
o Lead the Disciplineteam duringproject audits (internal,Customer and third party technical audits)
and Design Reviews.
o AssistDisciplineSupervisor I EngineeringManager in the preparation of quarterly forecasts and
manpower planning.
o Anticipate projectengineering needs and plan accordingly.
o AssistDisciplineSupervisor I EngineeringManager, and ProjectEngineering Manager or Project
Manager in Performance Evaluation of project team members.
o Coordinate with representatives from Fabrication and Marineto identify the construction sequence
and preferential design details.
o Ensure Structural item clashes identified in 3D model are addressed and resolved.
o Participatein 3D model reviews, and ensure Structural review comments are closed.o Travel
to fabrication yard or offshoreto provide assistanceduringfabrication
29. Structural Engineer -(1900641)
TYPICAL EXPERIENCE EDUCATION
3+ yrs in oil and gas with major contractor or consultant predominantly
performing detail design of offshore facilities
Bachelor Degree in Civil or Structural Engineering (Master Degree is
Preferred)
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and
design as per design basis, project specifications, design codes and
standards.
- Apply knowledge and skills to a wide range of standard and
nonstandard situations.
- Prepare clear and accurate detailed design calculations and
analyses including design reports and procedures .
- Manage own time to meet agreed deadlines and budgets, and
develop plans for short-term work activities in own area.
- Clearly communicate and explain complex issues and work to
establish understanding.
- Perform detailed engineering and design calculations
including analysis of offshore structures (in- service I pre-service
conditions).
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scope of work, specifications,
schedule and all inter-discipline requirements; including identifying
concerns as early as practicable and taking appropriate initiatives to
address the issues.
30. - Identify changes to scope and promptly raise change notifications,
including providing any necessary supporting documentation and
estimates. Provide similar support for Variation Orders.
- Interface with all disciplines to develop clash free designs.
- Interface with other departments to obtain input for Discipline
designs and drawings .
- Maintain close co-ordination with other engineering disciplines,
Planning, Fabrication, Marine, and
Project Management Team, as required .
- Document substantive communications (communications that
result in significant decisions or assignment of actions) and forward copies
to Discipline Lead Engineer and Discipline Manager.
- Assist in preparation of estimates for bid proposals, including
technical query reviews, execution statements and manhour estimates .
- Raise technical queries to obtain missing information, clarify work
scope , and to maintain preferred McDermott procedures , specifications,
standards, practices and operational requirements .
- Prepare Discipline engineering design basis, philosophies, and
technical specifications, as required.
- Participate in finalizing deliverables lists and deliverables, ensuring
compliance with specifications and functional integrity.
- Attend project review meetings, vendor meetings, engineering
meetings and offshore site surveys, as required.
- Provide technical direction and review of Designers producing
products related to Structural Engineering.
31. - Prepare and review design reports and procedures .
- Assist in providing necessary design inputs to other disciplines to
enable them in proceeding with their deliverables.
- Assist procurement personnel in procuring Discipline
equipment, materials and services; ensuring that work produced complies
with Customer objectives and procedures . Procurement assistance
includes preparing and reviewing requisitions, evaluating technical
quotations and preparing queries, compiling bid tabulations and
recommendations, preparing purchase requisitions, and coordinating with
Procurement to expedite vendor documents, as directed by Discipline
Lead Engineer.
- Assist in updating weight report based on receipt of vendor
information .
- Check engineering performed by others within Discipline.
- Review vendor and subcontractor submittals, checking for
compliance with project specifications
and providing comments as necessary.
Perform design verification through single-discipline check I inter-
discipline check (IDC). Provide technical support to all fabrication queries,
including identifying defect I rectification
requirements.
Keep the Lead Engineer apprised of all activities and concerns, technical,
budgetary and manpower related.
Assist in providing inputs for actual, planning and forecasting progress
reports including associated productivity .
Check final subcontractor and vendor data manuals to ensure that all
requested data has been received and approved.
32. Participate in internal, Customer and third party technical audits on
engineering deliverables and vendor documents.
Assist Lead Engineer with responses to Customer and other agencies (such
as certifying authorities, auditors, third parties, etc.) on their review and
approval.
Capture lessons learned and enter into MDR's Lessons Learned system.
Capture Knowledge Objects and enter into MDR's Know system .
Act as a resource for colleagues with less experience.
Guide Jess experienced engineers on MDR and Discipline procedures,
standards, worksheets, design calculations, software, requisitions,
technical bid evaluations, technical queries, etc.
Be aware of costs related to own work and of the discipline.
Provide guidance on preparing structural general arrangements , basic
schemes for fabrication and installation.
Prepare I review design analyses, calculations and procedures for
discipline deliverables such as:
o Analyze structures for in-service conditions such as static, fatigue,
earthquake, etc.
o Analyze structures for pre-service conditions such as lift analyses,
loadout analyses, and transportation and tiedown analyses.
o Perform detailed steelwork design.
o Prepare Weight and Center of Gravity reports.
33. Review all detailed drawings ensuring technical correctness, professional
presentation and that fabrication and installation requirements are
satisfied .
Familiar with software tools in addition to MicroSAS, such as ANSYS or
GRLWEAP
34. Senior Structural Engineer-(1900639)
TYPICAL EXPERIENCE EDUCATION
6+ yrs in oil and gas with major contractor or consultantpredominantly performingdetail design of offshore
facilities
Bachelor Degree in Civil or Structural Engineering(Master Degree is Preferred)
BASIC FUNCTIONS
- Perform conceptual,FEED, Studies, and detailed analyses and design as per design basis,project
specifications,design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accuratedetailed design calculationsand analyses includingdesign reports and
procedures .
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicateand explain complex issues and work to establish understanding.
- Perform detailed engineering and design calculationsincludinganalysisof offshore
structures (in- serviceI pre-service conditions).
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scopeof work, specifications,scheduleand all inter-discipline
requirements; includingidentifyingconcerns as early as practicableand takingappropriateinitiativesto
address the issues.
- Identify changes to scopeand promptly raisechangenotifications,includingprovidingany necessary
supportingdocumentation and estimates. Providesimilarsupportfor Variation Orders.
- Interface with all disciplines to develop clash freedesigns.
- Interface with other departments to obtain inputfor Disciplinedesigns and drawings .
- Maintain closeco-ordination with other engineering disciplines,Planning,Fabrication,Marine,and
Project Management Team, as required .
- Document substantivecommunications (communicationsthatresultin significantdecisionsor
assignmentof actions) and forward copies to DisciplineLead Engineer and DisciplineManager.
- Assistin preparation of estimates for bid proposals,includingtechnical query reviews, execution
statements and manhour estimates .
- Raisetechnical queries to obtain missinginformation,clarify work scope, and to maintain preferred
McDermott procedures , specifications,standards,practices and operational requirements .
- Prepare Disciplineengineeringdesign basis,philosophies,and technical specifications,as required.
- Participatein finalizingdeliverables lists and deliverables,ensuringcompliancewith specifications
and functional integrity.
35. - Attend projectreview meetings, vendor meetings, engineering meetings and offshoresite surveys,
as required.
- Provide technical direction and reviewof Designers producingproducts related to Structural
Engineering.
- Prepare and review design reports and procedures .
- Assistin providingnecessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assistprocurement personnel in procuringDisciplineequipment, materials and services;ensuring
that work produced complies with Customer objectives and procedures . Procurement assistance
includes preparingand reviewingrequisitions,evaluatingtechnical quotationsand preparingqueries,
compilingbid tabulationsand recommendations,preparingpurchaserequisitions,and coordinatingwith
Procurement to expedite vendor documents, as directed by DisciplineLead Engineer.
- Assistin updatingweight report based on receipt of vendor information .
- Check engineering performed by others within Discipline.
- Review vendor and subcontractor submittals,checkingfor compliancewith projectspecifications
and providingcomments as necessary.
Perform design verification through single-disciplinecheck I inter-disciplinecheck (IDC). Providetechnical
supportto all fabrication queries,includingidentifyingdefect I rectification
requirements.
Keep the Lead Engineer apprised of all activities and concerns,technical,budgetary and manpower related.
Assistin providinginputs for actual,planningand forecastingprogress reports includingassociated
productivity .
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Participatein internal,Customer and third party technical audits on engineering deliverables and vendor
documents.
AssistLead Engineer with responses to Customer and other agencies (such as certifyingauthorities,auditors,
third parties,etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's Know system .
Act as a resourcefor colleagues with less experience.
Guide Jess experienced engineers on MDR and Disciplineprocedures,standards,worksheets,design
calculations,software,requisitions,technical bid evaluations,technical queries,etc.
Be aware of costs related to own work and of the discipline.
36. Provideguidanceon preparingstructural general arrangements , basic schemes for fabrication and
installation.
Prepare I review design analyses,calculationsand procedures for disciplinedeliverables such as:
o Analyze structures for in-serviceconditions such asstatic,fatigue,earthquake, etc.
o Analyze structures for pre-serviceconditions such as liftanalyses,loadoutanalyses,and
transportation and tiedown analyses.
o Perform detailed steelwork design.
o Prepare Weight and Center of Gravity reports.
Review all detailed drawings ensuringtechnical correctness, professional presentation and thatfabrication
and installation requirements aresatisfied .
Familiarwith software tools in addition to MicroSAS, such as ANSYS or GRLWEAP
37. Principal Structural Engineer-(1900638)
TYPICAL EXPERIENCE EDUCATION
10+ yrs in oil and gas with major contractor or consultantpredominantly performing detail design of
offshore facilities
Bachelor Degree in Civil or Structural Engineering(Master Degree is Preferred)
BASIC FUNCTIONS
- Perform conceptual,FEED, Studies, and detailed analyses and design as per design basis,project
specifications,design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accuratedetailed design calculationsand analyses includingdesign reports and
procedures .
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicateand explain complex issues and work to establish understanding.
- Perform detailed engineering and design calculationsincludinganalysisof offshore
structures (in- serviceI pre-service conditions).
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scopeof work, specifications,scheduleand all inter-discipline
requirements; includingidentifyingconcerns as early as practicableand takingappropriateinitiativesto
address the issues.
- Identify changes to scopeand promptly raisechangenotifications,includingprovidingany necessary
supportingdocumentation and estimates. Providesimilarsupportfor Variation Orders.
- Interface with all disciplines to develop clash freedesigns.
- Interface with other departments to obtain inputfor Disciplinedesigns and drawings .
- Maintain closeco-ordination with other engineering disciplines,Planning,Fabrication,Marine,and
Project Management Team, as required .
- Document substantivecommunications (communicationsthat resultin significantdecisionsor
assignmentof actions) and forward copies to DisciplineLead Engineer and DisciplineManager.
- Assistin preparation of estimates for bid proposals,includingtechnical query reviews, execution
statements and manhour estimates .
- Raisetechnical queries to obtain missinginformation,clarify work scope, and to maintain preferred
McDermott procedures , specifications,standards,practices and operational requirements .
- Prepare Disciplineengineeringdesign basis,philosophies,and technical specifications,as required.
- Participatein finalizingdeliverables lists and deliverables,ensuringcompliancewith specifications
and functional integrity.
38. - Attend projectreview meetings, vendor meetings, engineering meetings and offshoresite surveys,
as required.
- Provide technical direction and reviewof Designers producingproducts related to Structural
Engineering.
- Prepare and review design reports and procedures .
- Assistin providingnecessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assistprocurement personnel in procuringDisciplineequipment, materials and services;ensuring
that work produced complies with Customer objectives and procedures . Procurement assistance
includes preparingand reviewingrequisitions,evaluatingtechnical quotationsand preparingqueries,
compilingbid tabulationsand recommendations,preparingpurchaserequisitions,and coordinatingwith
Procurement to expedite vendor documents, as directed by DisciplineLead Engineer.
- Assistin updatingweight report based on receipt of vendor information .
- Check engineering performed by others within Discipline.
- Review vendor and subcontractor submittals,checkingfor compliancewith projectspecifications
and providingcomments as necessary.
Perform design verification through single-disciplinecheck I inter-disciplinecheck (IDC). Providetechnical
supportto all fabrication queries,includingidentifyingdefect I rectification
requirements.
Keep the Lead Engineer apprised of all activities and concerns,technical,budgetary and manpower related.
Assistin providinginputs for actual,planningand forecastingprogress reports includingassociated
productivity .
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Participatein internal,Customer and third party technical audits on engineering deliverables and vendor
documents.
AssistLead Engineer with responses to Customer and other agencies (such as certifyingauthorities,auditors,
third parties,etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's Know system .
Act as a resourcefor colleagues with less experience.
Guide Jess experienced engineers on MDR and Disciplineprocedures,standards,worksheets,design
calculations,software,requisitions,technical bid evaluations,technical queries,etc.
Be aware of costs related to own work and of the discipline.
39. Provideguidanceon preparingstructural general arrangements , basic schemes for fabrication and
installation.
Prepare I review design analyses,calculationsand procedures for disciplinedeliverables such as:
o Analyze structures for in-serviceconditions such asstatic,fatigue, earthquake, etc.
o Analyze structures for pre-serviceconditions such as liftanalyses,loadoutanalyses,and
transportation and tiedown analyses.
o Perform detailed steelwork design.
o Prepare Weight and Center of Gravity reports.
Review all detailed drawings ensuringtechnical correctness, professional presentation and thatfabrication
and installation requirements aresatisfied .
Familiarwith software tools in addition to MicroSAS, such as ANSYS or GRLWEAP
40. Associate Structural Engineer - (1900636)
EDUCATION
3+ yrs in oil and gas with major contractor or consultant predominantly
performing detail design of offshore facilities
Bachelor Degree in Civil or Structural Engineering (Master Degree is
Preferred)
BASIC FUNCTIONS
- Perform conceptual, FEED, and detailed analyses and design as per
design basis, project
specifications, design codes and standards .
- Apply in-depth skills and broad knowledge of the business to
address complex problems and
nonstandard situations.
- Prepare clear and accurate detailed design calculations and
analyses including design reports and
procedures.
- Manage own time to meet objectives, and (as Lead Engineer)
forecast and plan resource
requirements.
- Clearly communicate and explain difficult concepts and persuade
others to adopt a point of view.
- Perform detailed engineering and design calculations including
analysis of offshore structures_{in- service I pre-service conditions).
- When acting as Lead Engineer, in addition :
o Direct small or medium Structural Engineering team as a Lead
Engineer.
41. o Lead the Discipline engineering design of the assigned work area
and complete within planned schedule and budget, in accordance with
standards, MDR and project-specific procedures and to a high professional
standard.
o Plan, organize and direct all aspects of Discipline execution on the
assigned project including scope, deliverables, schedule and all manpower
resources - agree allocations with the Discipline Manager.
o Ensure interfaces and deliverables are clearly identified.
o Maintain responsibility for progress and productivity, identifying
any required corrective
action .
o Act as project representative for the Discipline during meetings
with Project Team, Customer discipline lead and relevant agencies such as
certifying authorities, auditors, third parties, etc.
TASKS & RESPONSIBILITIES
Become fully familiar with the project scope of work, specifications,
schedule and all inter-discipline requirements; including identifying
concerns as early as practicable and taking appropriate initiatives to
address the issues. Interpret contractual requirements as they relate to
engineering execution.
Identify changes to scope and promptly raise change notifications,
including providing any necessary supporting documentation and
estimates. Provide similar support for Variation Orders.
Interface with all disciplines to develop clash free designs.
42. Interface with other departments to obtain input for Discipline designs
and drawings .
Maintain close co-ordination with other engineering disciplines, Planning,
Fabrication, Marine, and Project Management Team, as required.
Document substantive communications (communications that result in
significant decisions or assignment of actions) and forward copies to
Discipline Lead Engineer and Discipline Manager.
Prepare estimates for bid proposals, including technical query reviews,
execution statements and manhour estimates , identifying software
requirements and any other project-specific requirements.
Raise technical queries to obtain missing information, clarify work scope,
and to maintain preferred McDermott procedures , specifications ,
standards, practices and operational requirements .
Prepare, review, and (as Lead Engineer) approve Discipline engineering
design basis, philosophies ,
and technical specifications.
Participate in finalizing deliverables lists and deliverables, ensuring
compliance with specifications and functional integrity.
- Review project schedule and fabrication schedule in relation to
construction sequence, milestones, and engineering scope.
- Attend project kickoff and review meetings, vendor meetings,
engineering meetings and offshore site surveys, as required .
- Provide technical direction and review of Designers producing
products related to Structural Engineering.
- Prepare, review, and (as Lead Engineer) approve design reports
and procedures.
43. - Assist in providing necessary design inputs to other disciplines to
enable them in proceeding with their deliverables .
- Assist procurement personnel in procuring Discipline equipment,
materials and services; ensuring that work produced complies with
Customer objectives and procedures. Procurement assistance includes
preparing, reviewing, and (as Lead Engineer) approving requisitions,
evaluating technical quotations and preparing queries, compiling bid
tabulations and recommendations , preparing purchase requisitions, and
coordinating with Procurement to expedite vendor documents, as directed
by Discipline Lead Engineer.
- Assist in updating weight report based on receipt of vendor
information.
- Review and (as Lead Engineer) approve vendor and subcontractor
submittals, checking for compliance with project specifications and
providing comments as necessary.
- Review and (as Lead Engineer) approve design verification through
single-discipline check I inter discipline check (IDC).
- Provide technical support to fabrication queries, including
identifying defect I rectification requirements.
- Keep the Discipline Manager and Project Management Team
apprised of all activities and concerns, technical, budgetary and manpower
related.
- Assist in providing inputs for actual, planning and forecasting
progress reports including associated productivity.
- Check final subcontractor and vendor data manuals to ensure that
all requested data has been received and approved.
44. - Present issues and problems to Customers in a timely manner and
assist Lead Engineer in negotiating resolution in accordance with project
and company requirements.
- Perform (as required) Technical Quality Audit reviews in
accordance with MDR Global Procedures.
- Assist Lead Engineer with responses to Customer and other
agencies (such as certifying authorities, auditors, third parties, etc.) on
their review and approval.
- Capture lessons learned and enter into MDR's Lessons Learned
system.
- Capture Knowledge Objects and enter into MDR's K.now system.
- Guide less experienced engineers on MDR and Discipline
procedures, standards, worksheets, design calculations, software,
requisitions, technical bid evaluations, technical queries, etc.
- Supervise and guide assigned engineers and coordinate with
project Lead Designers for Discipline engineering and design deliverables.
- Responsible for the engineering integrity of the assigned work
area.
- Monitor costs of own work processes.
- Assist in the maintenance of departmental technical guidelines
and standard calculation notes.
- Participate in development and maintenance of Global
Procedures, Software, and Standards .
- May participate in standards development committees or task
groups such as API.
45. - Develop communication and presentation skills (e.g., write
technical papers, participate in conferences and/or seminars, present
design solutions, and/or present topics at "lunch and learns"; etc.).
- Identify and provide training to staff in specific techniques and
proprietary software.
- Provide information on employee performance to the Discipline
Manager.
- Assist Discipline manager in interviewing job applicants.
- Provide guidance on preparing structural general arrangements,
basic schemes for fabrication and installation.
- Prepare I review design analyses, calculations and procedures for
discipline deliverables such as:
o Analyze structures for in-service conditions such as static, fatigue,
earthquake, etc.
o Analyze structures for pre-service conditions such as lift analyses,
loadout analyses, and transportation and tiedown analyses.
o Perform detailed steelwork design.
o Prepare Weight and Center of Gravity reports.
- Review and (as Lead Engineer) approve all detailed drawings
ensuring technical correctness,
professional presentation and that fabrication and installation
requirements are satisfied.
46. - Review and (as Lead Engineer) approve the project Weight Control
Report, ensuring technical quality, professional presentation and that
Fabrication and installation requirements are employed.
- Able to use standard structural analysis software such as MicroSAS
or SACS to perform higher level analysis of offshore platforms, providing
guidance for less-experienced engineers performing these analyses.
- When acting as Lead Engineer, in addition:
o Act as project-based Discipline point of contact in communications
and meetings with Customer counterparts.
o Ensure substantive communications are documented.
o Prepare bid's and project's Discipline engineering budget and
execution plans, updating as
required.
o Identify project staff needs based on knowledge of individual
engineer 's skill sets and provide requests to the Discipline manager.
o Plan, organize and assign tasks, responsibilities, and manhour
budgets to the discipline team, and verify tasks are completed within
budgets .
o Plan Discipline Level 4 detail deliverable schedule/ register
compliant with the overall execution plan.
o Prepare working forecasts identifying change management plans,
corrective action and real
time schedule.
o Provide Discipline inputs for actual, planning and forecasting
progress reports including associated productivity.
47. o Alert project team of any deviation from the scope or a need for
change order.
o Monitor KPI measurement results, and take corrective action as
necessary to improve Discipline performance, including performance at
interfaces with others.
o Coordinate with other Discipline Lead Engineers and Designers to
ensure timely receipt of necessary design inputs.
o Review and approve requisitions, technical quotation evaluations
and queries, compiled bid tabulations and recommendations, and
purchase requisitions; and coordinate with Procurement to expedite
vendor documents as required.
o Lead the Discipline team during project audits (internal, Customer
and third party technical audits) and Design Reviews.
o Review comments from Customers & other agencies on
documents and drawings produced by the team, and resolve and give
guidance on their update and incorporation.
o Assist Discipline manager in the preparation of quarterly forecasts
and manpower planning. o Anticipate project engineering needs and
plan accordingly.
o Coordinate with vendor for discipline managed/procured items.
o Assist Discipline manager and Project Engineering Manager or
Project Manager in Performance Evaluation of project team members.
48. Piping Engineer-(1900628)
EDUCATION
3 - 5+ yrs in oil and gas with major contractor or consultantpredominantly performingdetail design of
offshore facilities
Bachelor Degree in Mechanical Engineeringor in similarEngineeringfield
BASIC FUNCTIONS
- Perform conceptual,FEED, Studies, and detailed analyses and design as per design basis,
project specifications,design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accuratedetailed design calculationsand analyses includingdesign reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicateand explain complex issues and work to establish understanding.
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scopeof work, specifications,scheduleand all inter-
disciplinerequirements; includingidentifyingconcerns asearly as practicable and takingappropriate
initiativesto address the issues.
- Identify changes to scopeand promptly raisechangenotifications,includingprovidingany
necessary supportingdocumentation and estimates. Provide similar supportfor Variation Orders.
- Interface with all disciplines to develop clash freedesigns.
- Interface with other departments to obtain inputfor Disciplinedesigns and drawings.
- Maintain closeco-ordination with other engineering disciplines,Planning,Fabrication,Marine,and
Project Management Team, as required.
- Document substantivecommunications (communicationsthatresultin significantdecisionsor
assignmentof actions) and forward copies to DisciplineLead Engineer and DisciplineManager.
- Assistin preparation of estimates for bid proposals,includingtechnical query reviews, execution
statements and manhour estimates.
- Raisetechnical queries to obtain missinginformation,clarify work scope,and to maintain preferred
McDermott procedures, specifications ,standards,practices and operational requirements .
- Prepare Disciplineengineeringdesign basis,philosophies,and technical specifications,as required.
- Participatein finalizingdeliverables lists and deliverables,ensuringcompliancewith specifications
and functional integrity.
- Attend projectreview meetings, vendor meetings, engineering meetings and offshoresite surveys,
as required.
- Provide technical direction and reviewof Designers producingproducts related to Piping
Engineering.
49. - Prepare and review design reports and procedures.
- Assistin providingnecessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assistprocurement personnel in procuringDisciplineequipment, materials and services;ensuring
that work produced complies with Customer objectives and procedures. Procurement assistanceincludes
preparingand reviewing requisitions,evaluatingtechnical quotations and preparingqueries,compilingbid
tabulations and recommendations,preparingpurchaserequisitions,and coordinatingwith Procurement to
expedite vendor documents, as directed by DisciplineLead Engineer .
- Assistin updatingweight report based on receipt of vendor information.
- Check engineering performed by others within Discipline.
- Review vendor and subcontractor submittals,checkingfor compliancewith projectspecifications
and providingcomments as necessary.
- Perform design verification through single-disciplinecheck I inter-disciplinecheck (IDC).
- Provide technical supportto all fabrication queries,includingidentifyingdefect I rectification
requirements.
- Keep the Lead Engineer apprised of all activities and concerns,technical,budgetary and manpower
related.
- Assistin providinginputs for actual,planningand forecastingprogress reports includingassociated
productivity.
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved.
- Participatein internal,Customer and third party technical audits on engineeringdeliverables and
vendor documents .
- AssistLead Engineer with responses to Customer and other agencies (such as certifyingauthorities,
auditors,third parties, etc.) on their review and approval.
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Capture Knowledge Objects and enter into MDR's K.now system .
- Act as a resource for colleagues with less experience.
- Guide less experienced engineers on MDR and Disciplineprocedures,standards,worksheets,design
calculations,software,requisitions,technical bid evaluations,technical queries,etc.
- Be aware of costs related to own work and of the discipline.
- Review pipe support locations and types:
o Selected by pipingdesign for non-critical piping.
50. o Defined by pipe stress analysisfor critical piping.
- Become fully familiar with P&ID,Line List, Equipment Layouts, PipingSpecifications,and Design
Basis.
- Prepare I Review Special PipingItems Listand required pipingand valvespecificationsand
datasheets.
- Review P&ID with reference to PipingMaterial and Valvespecification and mark-up Master P&ID.
- Provide inputfor Hydrotest Flow Diagrams and LineList.
- Perform I Review PipingStress Analyses and reports.
- Provide critical pipesupport loadsto Structural Engineering Lead for structural design I verification.
support, external pressure, etc.
- Provide pipesupport requirements to PipingDesign Lead.
- Participatein Factory Acceptance Testing of PipingEngineered items, as assigned.
- Review PipingMTO with respect to Material Requisitions and Projectrequirements.
- Prepare I Review Material Requisitions,Technical Queries,Technical Bid Evaluationsand Purchase
Requisitions for Engineered PipingEquipment includingValves,SP Items, PipingBulks,Springsupports,
Access fittings,etc.
51. Senior Piping Engineer-(1900627)
EDUCATION
6+ yrs in oil and gas with major contractor or consultantpredominantly performingdetail design of offshore
facilities
Bachelor Degree in Mechanical Engineeringor in similarEngineeringfield
BASIC FUNCTIONS
- Perform conceptual,FEED, Studies, and detailed analyses and design as per design basis,
project specifications,design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accuratedetailed design calculationsand analyses includingdesign reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicateand explain complex issues and work to establish understanding.
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scopeof work, specifications,scheduleand all inter-
disciplinerequirements; includingidentifyingconcerns asearly as practicableand takingappropriate
initiativesto address the issues.
- Identify changes to scopeand promptly raisechangenotifications,includingprovidingany
necessary supportingdocumentation and estimates. Provide similar supportfor Variation Orders.
- Interface with all disciplines to develop clash freedesigns.
- Interface with other departments to obtain inputfor Disciplinedesigns and drawings.
- Maintain closeco-ordination with other engineering disciplines,Planning,Fabrication,Marine,and
Project Management Team, as required.
- Document substantivecommunications (communicationsthatresultin significantdecisionsor
assignmentof actions) and forward copies to DisciplineLead Engineer and DisciplineManager.
- Assistin preparation of estimates for bid proposals,includingtechnical query reviews, execution
statements and manhour estimates.
- Raisetechnical queries to obtain missinginformation,clarify work scope,and to maintain preferred
McDermott procedures, specifications ,standards,practices and operational requirements .
- Prepare Disciplineengineeringdesign basis,philosophies,and technical specifications,as required.
- Participatein finalizingdeliverables lists and deliverables,ensuringcompliancewith specifications
and functional integrity.
- Attend projectreview meetings, vendor meetings, engineering meetings and offshoresite surveys,
as required.
- Provide technical direction and reviewof Designers producingproducts related to Piping
Engineering.
52. - Prepare and review design reports and procedures.
- Assistin providingnecessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assistprocurement personnel in procuringDisciplineequipment, materials and services;ensuring
that work produced complies with Customer objectives and procedures. Procurement assistanceincludes
preparingand reviewing requisitions,evaluatingtechnical quotations and preparingqueries,compilingbid
tabulations and recommendations,preparingpurchaserequisitions,and coordinatingwith Procurement to
expedite vendor documents, as directed by DisciplineLead Engineer .
- Assistin updatingweight report based on receipt of vendor information.
- Check engineering performed by others within Discipline.
- Review vendor and subcontractor submittals,checkingfor compliancewith projectspecifications
and providingcomments as necessary.
- Perform design verification through single-disciplinecheck I inter-disciplinecheck (IDC).
- Provide technical supportto all fabrication queries,includingidentifyingdefect I rectification
requirements.
- Keep the Lead Engineer apprised of all activities and concerns,technical,budgetary and manpower
related.
- Assistin providinginputs for actual,planningand forecastingprogress reports includingassociated
productivity.
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved.
- Participatein internal,Customer and third party technical audits on engineeringdeliverables and
vendor documents .
- AssistLead Engineer with responses to Customer and other agencies (such as certifyingauthorities,
auditors,third parties,etc.) on their review and approval.
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Capture Knowledge Objects and enter into MDR's K.now system .
- Act as a resource for colleagues with less experience.
- Guide less experienced engineers on MDR and Disciplineprocedures,standards,worksheets,design
calculations,software,requisitions,technical bid evaluations,technical queries,etc.
- Be aware of costs related to own work and of the discipline.
- Review pipe support locations and types:
o Selected by pipingdesign for non-critical piping.
53. o Defined by pipe stress analysisfor critical piping.
- Become fully familiar with P&ID,Line List, Equipment Layouts, PipingSpecifications,and Design
Basis.
- Prepare I Review Special PipingItems Listand required pipingand valvespecificationsand
datasheets.
- Review P&ID with reference to PipingMaterial and Valvespecification and mark-up Master P&ID.
- Provide inputfor Hydrotest Flow Diagrams and LineList.
- Perform I Review PipingStress Analyses and reports.
- Provide critical pipesupportloadsto Structural Engineering Lead for structural design I verification.
support, external pressure, etc.
- Provide pipesupport requirements to PipingDesign Lead.
- Participatein Factory Acceptance Testing of PipingEngineered items, as assigned.
- Review PipingMTO with respect to Material Requisitions and Projectrequirements.
- Prepare I Review Material Requisitions,Technical Queries,Technical Bid Evaluationsand Purchase
Requisitions for Engineered Piping Equipment includingValves,SP Items, PipingBulks,Springsupports,
Access fittings,etc.
54. Associate Mechanical Engineer- (1900613)
TYPICAL EXPERIENCE EDUCATION
Entry-level position,or less than 3 yrs experience in oil and gas
Bachelor Degree in Mechanical Engineeringor in similarEngineeringfield
LIAISE WITH: Engineers, Design Supervisor and Designers of own discipline
BASIC FUNCTIONS
- Perform detailed design engineering, analysisand calculations on basicengineeringtasks.
- Apply knowledge and skills to complete routine assignments under closesupervision and mentoring.
- Prepare clear and accuratedetailed design calculationsand analyses includingdesign reports and
procedures.
- Organizeown work to meet deadlines set by others.
- Clearly communicateinformation,askingquestions and checkingfor understanding.
TASKS & RESPONSIBILITIES
- Gain an understandingof the projectscope of work , specifications,scheduleand all inter-discipline
requirements.
- Prepare sketches of detail design to guide Designers.
- Review MTOs for requisitions.
- Check drawings.
- Keep the Lead Engineer apprised of all activities,progress and concerns.
- Develop an awareness of costs related to own work.
- Develop basic understandingof MDR's business and customers itserves.
- Develop basic knowledge of MDR's business units and interactionsincludingengineering,
fabrication,and marinefunctions.
- Develop advanced skillsin useof standard productivity tools such as MicrosoftWord,Excel,and
PowerPoint.
55. Mechanical Engineer-(1900612)
TYPICAL EXPERIENCE EDUCATION
3+ yrs in oil and gas with major contractor or Bachelor Degree in Mechanical Engineeringor in consultant
predominantly performing detail design of similarEngineeringfield
offshore facilities (Master Degree is Preferred)
GENERAL PROFILE
Project: Lead Engineer Familiar with the content and application of
Functional:SupervisingEngineer or Engineering standards,codes and guidelines as applicablefor
-
SUPERVISES: OTHER
Trainee Engineers Preferably Registered Engineer in Training(EIT) or member of professional
engineering society
LIAISE WITH: All design I draftingdisciplines,all Engineeringdisciplines,Fabrication group and Document
Control.
BASIC FUNCTIONS
- Perform FEED, Studies,and detailed design engineering, analysisand calculationson more complex
and demanding engineering tasks.
- Apply knowledge and skills to complete varied assignments.
- Prepare clear and accuratedetailed design calculationsand analyses includingdesign reports and
procedures.
- Prioritizeand organizeown work to meet deadlines.
- Focus on completing work within budgets.
- Clearly communicateand explain information in straightforward engineeringactivities.
TASKS & RESPONSIBILITIES
- Gain familiarity with the project scope of work, specifications,scheduleand all inter-discipline
requirements; includingidentifyingconcerns as early as practicable.
- Recognize changes to scopeand notify the DisciplineLead Engineer.
- Interface with all disciplines to develop clash freedesigns.
- Interface with other departments to obtain inputfor Disciplinedesigns and drawin
- Document substantivecommunications (communicationsthatresultin significantdecisionsor
assignmentof actions) and forward copies to DisciplineLead Engineer and DisciplineManager .
- Provide required bid inputs as directed .
56. - Prepare sketches of detail design to guide Designers .
- Assistprocurement personnel in procuringdisciplineequipment, materials and services.
Procurement assistanceincludes preparingrequisitions,evaluatingtechnical quotations and preparing
queries, compilingbid tabulations and recommendations,preparingpurchaserequisitions,and coordinating
with Procurement to expedite vendor documents, as directed by DisciplineLead Engineer.
- Review MTOs for requisitions.
- Assistin updatingweight report based on receipt of vendor information .
- Check drawings.
- Check engineering performed by others within Discipline.
- Review vendor and subcontractor submittals,checkingfor compliancewith projectspecifications
and providingcomments as necessary.
- Perform design verification through single-disciplinecheck and assistwith inter-disciplinechecks
(IDC).
- Keep the Lead Engineer apprised of all activities,progress and concerns .
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved .
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Capture Knowledge Objects and enter into MDR's K.now system.
- Develop an awareness of costs related to own work and of the discipline.
- Review P & IDs, plotplans and structural supportingdetails with reference to vendor drawings and
details.
- Prepare lubrication scheduleand spareparts schedule.
- Assistwith equipment inspection and testing.
- Provide inputto operations and maintenance manuals.
57. Principal Instrumentation Engineer-(1900609)
Principal Automation & Instrumentation Engineer
TYPICAL EXPERIENCE EDUCATION
10+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of
offshore facilities
Bachelor Degree in Chemical,Electrical ,or Electronics and Instrumentation Engineering
REPORTS TO: GENERAL PROFILE
Project: Lead Engineer, ProjectEngineering Manager or Project Manager
Functional:SupervisingEngineer or Engineering Manager
Detailed knowledge of design techniques and analysis methods,and detailed knowledge of the theory,
content and application of standards,codes and guidelines as applicablefor offshore.Knowledgeable in
project coordination and execution skills.
SUPERVISES: OTHER
Senior Automation & Instrumentation Engineers and Automation & Instrumentation Engineers
Preferably Registered Professional Engineer or member of professional engineeringsociety
LIAISE WITH:
All Engineering disciplines, Fabrication Group,Safety Dept, Offshore Group, Project Management Team,
Document Control , Project Planner,ProjectCost Controller,QC and Certification Group,Procurement
Group, Subcontractors and Vendors, and Customers.
BASIC FUNCTIONS
- Perform conceptual,FEED, and detailed analyses and design as per design basis,project
specifications,design codes and standards.
- Apply in-depth skillsand broad knowledge of the business to address complex problems and
nonstandard situations.
- Prepare clear and accuratedetailed design calculationsand analyses includingdesign reports and
procedures.
- Manage own time to meet objectives , and (as Lead Engineer) forecastand plan resource
requirements.
- Clearly communicateand explain difficultconcepts and persuadeothers to adopta pointof view.
- When actingas Lead Engineer, in addition:
0 Direct small or medium Automation & Instrumentation Engineering team as a Lead Engineer.
1. Lead the Discipline engineering design of the assigned work area and complete within
planned schedule and budget, in accordance with standards, MDR and project-specific
procedures and to a high professional standard.
58. o Plan, organize and direct all aspects of Discipline execution on the
assigned project including scope, deliverables, schedule and all manpower resources -
agree allocations with the Discipline Manager.
o Ensure interfaces and deliverables are clearly identified.
o Maintain responsibility for progress and productivity, identifying any required
corrective action.
Act as project representative for the Discipline during meetings with Project Team,
Customer discipline lead and relevant agencies such as certifying authorities, auditors, third
parties, etc.
TASKS & RESPONSIBILITIES
Become fully familiar with the project scope of work, specifications, schedule and all inter-
discipline requirements; including identifying concerns as early as practicable and taking
appropriate initiatives to address the issues. Interpret contractual requirements as they
relate to engineering execution .
Identify changes to scope and promptly raise change notifications, including providing any
necessary supporting documentation and estimates. Provide similar support for Variation
Orders.
Interface with all disciplines to develop clash free designs.
Interface with other departments to obtain input for Discipline designs and drawings.
Maintain close co-ordination with other engineering disciplines, Planning, Fabrication,
Marine, and Project Management Team, as required.
59. Document substantive communications (communications that result in significant decisions
or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline
Manager.
Prepare estimates for bid proposals, including technical query reviews, execution
statements and manhour estimates, identifying software requirements and any other
project-specific requirements .
Raise technical queries to obtain missing information, clarify work scope, and to maintain
preferred McDermott procedures, specifications, standards, practices and operational
requirements.
Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis,
philosophies, and technical specifications.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with
specifications and functional integrity.
Review project schedule and fabrication schedule in relation to construction sequence,
milestones, and engineering scope.
Attend project kickoff and review meetings, vendor meetings, engineering meetings and
offshore site surveys, as required.
Provide technical direction and review of Designers producing products related to
Automatio n &
Instrumentation Engineering.
Prepare, review, and (as Lead Engineer) approve design reports and procedures .
Assist in providing necessary design inputs to other disciplines to enable them in
proceeding with
60. their deliverables.
Assist procurement personnel in procuring Discipline equipment, materials and services;
ensuring that work produced complies with Customer objectives and procedures .
Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving
requisitions, evaluating technical quotations and preparing queries, compiling bid
tabulations and recommendations, preparing purchase requisitions, and coordinating with
Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.
Assist in updating weight report based on receipt of vendor information.
Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for
compliance with project specifications and providing comments as necessary .
Review and (as Lead Engineer) approve design verification through single-discipline check
I inter
discipline check (IDC).
Provide technical support to fabrication queries, including identifying defect I rectification
requirements.
Keep the Discipline Manager and Project Management Team apprised of all activities and
concerns, technical, budgetary and manpower related.
Assist in providing inputs for actual, planning and forecasting progress reports including
associated productivity.
Check final subcontractor and vendor data manuals to ensure that all requested data has
been received and approved.
Present issues and problems to Customers in a timely manner and assist Lead Engineer in
negotiating resolution in accordance with project and company requirements.
61. Perform (as required) Technical Quality Audit reviews in accordance with MDR Global
Procedures. Assist Lead Engineer with responses to Customer and other agencies (such
as certifying authorities ,
auditors, third parties, etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture
Knowledge Objects and enter into MDR's K.now system .
Guide less experienced engineers on MDR and Discipline procedures, standards,
worksheets,
design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Supervise and guide assigned engineers and coordinate with project Lead Designers for
Discipline engineering and design deliverables.
- Responsible for the engineering integrity of the assigned wor k area.
- Monitor costs of own work processes .
- Assist in the maintenance of departmental technical guidelines and standard
calculation notes.
- Participate in development and maintenance of Global Procedures, Software, and
Standards.
- May participate in standards development committees or task groups such as API.
- Develop communication and presentation skills (e.g., write technical papers,
participate in conferences and/or seminars, present design solutions, and/or present topics
at "lunch and learns"; etc.).