9. Our company has carefully selected a network of
trusted ingredients partners from 10+ countries
Maximum flexibility: Solutions tailored to your
specific requirements
Extensively tested quality: Ensuring you get
exactly what you expect
Competitive pricing: Giving you the opportunity
to increase your margins
IMPROVE &
9
12. 11
FOAM FORMATION
A COMMON ISSUE IN LIQUID SYSTEM
Basically, FOAM does not form in apure liquid as
bubbles simply break at the surface.
In Reality, Air / Emulsion/Surfactant are
incorporate into liquid during production &
application process, and its cause of FOAM
FORMATION & STABILIATION
Macrofoam
Located at the coating surface
Foam bubble stabilized by surfactant
Double layer (foam lamella)
Microfoam
Located below coating layer
Foam bubble stabilized by surfactant (“anchor mechanism”)
Stabilised by high coating viscosity
(velocity of rising determined by Law of Stoke)
Macrofoam
Microfoam
13. 12
FOAM CONTROL
TECHNOLOGY OF CHOICES
F
ATTYACIDSAMIDE ORESTER
POL-ALKYLGLYCOL
ORGANO-PHOSPHATE
ORGANIC POL
YMER (ACR
YLATE/ETHER)
ALIPHATIC HYDROCARBON
MENERAL OILS
SILICONE OILS
POLYSILOXANE-PILYETHER COPOLYMER
Hydrophobic particles modification usually help to increase an deformer efficiency (metallic soap,silica,organic urea derivatives)
DEFECT
FOAM
16. 16
EVALUATE JEBCHEM 1805AQ IN DECORATIVE WATER BASED PAINT
JEBCHEM
JC 1805AQ show BETTER defoam efficiency
B 1615
JEBCHEM 1805AQ
High shear
(Grinding)
Evaluated rating* of defoaming efficiency on film appearance
BYK 1615 JEBCHEM 1805 AQ
- Low shear
Wet film 1 2.5
Dry film 2 3.5
- High shear
Wet film 2 4
Dry film 3 4
Characteristic
Anti-foam performance rating
(1 = Poor, 5 = Excellent)
Low shear
(Let-down)
- Jebchem 1805AQ provide better efficiency at
high shear mixing.
- Jebchem 1805AQ shows anti-foam
performance better than BYK1615 in both
process
17. 15
S
PONGE ROLLER TES
T METHODE
Competitor
0.5%B022
Competitor
0.5%B018
Standard
NO ANTIFOAM
0.5%
JC1805AQ
0.5%
JC1710AQ
Standard
NO ANTIFOAM
JebChem 1710 AQ
WATERBASEDECORATIVE P
AINT – 100%MODIFIED SILICONE
S
TIRING TES
T METHODE
Competitor
0.5%B022
Competitor
0.5%B018
0.5%
1710AQ
Standard
NO ANTIFOAM
18. 16
WATERBASEDECORATIVE P
AINT – MINERAL OIL MODIFICATION
JebChem 1009M AQ
Competitor
0.5%
Competitor
0.5%B037
0.5%
1009MAQ
Standard
NO ANTIFOAM
Competitor
0.5%A125
S
PONGE ROLLER TES
T METHODE
19. 19
JEBCHEM
The superior Defoamer for premium Auto Car Refinish
& Solvent Base Industrial Coatings
JebChem 1066 Silicone defoamer for solvent-free and solvent-borne
coatings, printing inks, and ambient curing plastic systems on the
basis of epoxy resin and polyurethane. Standard silicone defoamer for
all solvent-borne systems. Good balance between effectiveness and
compatibility
B E N E F I T :
• Highly effective defoamer for solvent-borne and
solvent-free coating systems and printing inks,
• Offers optimal defoaming at a very low percentage of
incompatible substances.
• RAPID FOAM KNOCKDOWN
• EASY OPERATION
• LONG TERM STORAGE STABILITY
• NO ADVERSELY AFFECTING FILM APPEARANCE
• EFFECTIVE IN VARIETY OF APPLICATION
CHALLENGES SOLVED
JebChem 1066 Competitive with Competitor 066 in price & quality : Quick Test & Fast Result
20. 20
JEBCHEM
Silicone-free defoamer on polymer-basis for solvent-borne and solvent-free
systems. Standard defoamer for many different applications.
JebChem 2052 Competitive with Competitor 052 in price & quality : Quick Test & Fast Result
21. 14
JebChem 2052
SOLVENT BASE– SILICONEFREEDEFOAMER
S
TIRING TES
T METHODE HIGH S
PEED S
HAKING TES
T METHODE
JC2052
Competitor
B052
JC 2052
Competitor
B052
23. 18
A COMMON ISSUE IN LIQUID SYSTEM
SURFACE DEFECTS
SLIP ADDITIVE
Slip additive oriented itself on the surface of paint film. The
repeating unit of methyl siloxane group & organo-
modification will be determine slip property of the silicone.
LEVELLING ADDITIVE
Orientation towards the surface by controlled incompatibility
The variation of Mw and Polarity will determine the levelling
property in each paint system.
FLOW ADDITIVE
Enhancing the wet-out & flow ability of uncured film to eliminate
surface defects such as craters, fisheye, orange peels, brush
mark during applications, derived by surface tension, viscosity
of paint atsystem
S
UBSTRATEWETTING ADDITIVE
All aqueous coatings cause problems on substrates whose
surface tension values are below the values of the coating.
Examples craters, pinholes, adhesion..
24. 24
CHEMICAL OF SLIP ADDITIVES
Silicone Slip additive
Polydimethylsiloxanes
28. 22
SLIP ADDITIVE EVALUATION
1KTP
A SOLVENT BASESYSTEM
The Slip efficiency determine by Co-
efficient of Friction (COF) As result fond
that solvent basedJ
ebChem slip additive
provide better performance than
competitor.
LOWER COFvalue,BEETER slip property
TEST
% Dosage
(supply
form)
Slip Agent
In 35% PChem BM66 Solution
Average
COF
Reading
1 0.0 Standard - No Slip Agent 1.27
2 1.0 JebChem 3306(15% Solids) 0.43
3 0.5 JebChem 3323(100% Solids) 0.24
4 0.5 JebChem 3333(100% Solids) 0.72
5 0.5 JebChem 3410 (100% Solids) 0.57
6 0.5 Comp.T410 (100%) 0.63
7 0.5 CompT450 (100%) 0.89
29. 23
TEST
% Dosage
(supply form)
Slip Agent
In 35% Mowilith 727
Average COF
Reading
1 0.0 Standard - No SlipAgent 1.04
2 0.5 JebChem 3307(100% Solids) 0.50
3 0.5 JebChem 3410(100% Solids) 0.67
4 0.5 Jebchem 3333(100% Solids) 0.63
5 1.0 JebChem 3511 (40% Solids) 0.30
6 0.5 Comp.T410 (100%) 0.77
7 0.5 CompT450 (100%) 0.79
8 0.5 Comp B331 (100%) 0.70
9 0.5 Comp B333 (100%) 0.69
The Slip efficiency determine by Co-
efficient of Friction (COF) As result fond
that J
ebChem slip additive provide better
performance than competitor.
LOWER COFvalue,BETTER slip property
SLIP ADDITIVE EVALUATION
ACR
YLICWATERBASESYSTEM
30. 13
JEBCHEM 3333
Develop super slip w/b roof tile paint for Water Base Coating
Figure 1: The performance evaluation
of dirt pick up ability in different slip
additive. As test result, observed that
JebChem 3511 has very good
enhancing ability of dirt pick up, less
pigment stuck on sample panel
compare to B 378
Figure 2: The performance evaluation of
water repellent in different slip additive. As
test result observed JebChem 3333 can
enhance water repellency in water-base
roofing tile paint there are water stuck on
sample panel less than B 378.
JebChem 3511 is superior slip surface additive ,to improve slip and water repellant property
31. 31
JEBCHEM 6377
Flow and levelling – Solvent Base Coating
Performance evaluation JebChem Flow and Levelling in Base Coat 2K PU Car
refinish application
As evaluation of paint flow efficiency in different Flow & Levelling
compare JebChem product to competitor in market. Test result
observed paint film with added of JebChem 6377 provide a desired
flow efficiency no observed flow line. On the other hand there are
severe unfavorable flow on film with competitor product
Competitor E JebChem 6377
32. 32
JEBCHEM 6354, 6356, 6358
Flow and levelling – Solvent Base Coating
Performance evaluation JebChem Flow and Levelling in Base Coat 2K PU Car refinish
application
As evaluation of paint flow efficiency in different Flow & Levelling compare JebChem product to competitor in market. Test result observed paint film
with added of JebChem 6354, 6356 and 6358 provide a desired flow efficiency no observed flow line. On the other hand there are severe
unfavorable flow on film with competitor product
Competitor T
JebChem 6354
Wire-wound
Track Line
Good Flow
Competitor T JebChem 6356
Good Flow
Wire-wound
Track Line
Competitor T
JebChem 6358
36. 27
UNSTABILIZED OF PIGMENT DISPERSION
A COMMON ISSUE IN LIQUID P
AINT SYSTEM
PIGMENT FLOCCULATION
POOR OF COLOR STRENGHTS
POOR OFGLOS
SORTRANS
P
ARENCY
COLOR SEPARATIONS
BERNARD CELL ISSUE
HIGHVISCOSITY COLOR P
ASTE
LOW PIGMENT LOADING
LONG GRINDING/DISPERSINGTIME
S
TABILITY ISSUESOVERTIME
40. 31
JEBCHEM – DISPERSANTS
PRODUCT PORTFOLIO
CHEMISTRY PRODUCT CODE % ACTIVE Mw POLARITY W/B S/B UV
Polyacrylate JebChem 8190 AQ 50% High High ●
Fatty Acid JebChem 8504 AQ 40% Low High ●
Polyamide JebChem 8740 AQ 100% High High ●
Polyacrylate CPT JebChem 8755 AQ 100% High High ●
Polyamide JebChem 8907 100% High High ● ● ●
Polyacrylate JebChem 8061 100% High Low ● ●
Fatty Acid JebChem 8108 100% Low Low ●
Polyacrylate JebChem 8800 100% High Low ●
Fatty Acid JebChem 8104 50% Low Medium ●
Polyposphoric Acid Ester JebChem 8110 50% Low Medium ●
Polyamide JebChem 8163 50% High Medium ●
Polyamide CPT JebChem 8531 50% High Medium ● ●
41. 6
Wetting &Dispersing for Water Base Coating – General
Development organic Pigment Paste Binder Free for Water Based System.
JebChem 8755AQ is universal dispersant forW/B Organic Dispersant
JEBCHEM 8755 AQ
42. 42
JEBCHEM 8755 AQ
Wetting &Dispersing for Water Base Coating – General
The evaluation of JebChem Dispersing Agent
Compared to Competitor product in organic
pigment for water based system
43. Figure1. Establish full shade of FW200 CB paste
using JebChem 8531 compare to CAB standard
16
JEBCHEM 8531
Figure3. Establish reduce shade/rub out test of
FW200 CB paste using JebChem 8531 compare to
CAB standard
Evaluation JebChem DispersingAgent for Carbon Black Paste in 2K PU system :
Improving CB paste formulation to increase the productivity, reduce grinding time,higher color strength
Higher Gloss
Shorten Grinding
time from 6 hrs. to
2 hrs.
JebChem 8531provided avery superior dispersant for PremiumAuto OEC & Refinish
44. 32
JEBCHEM 8061
SHORT O IL ALKYD / Low - Medium Polarity System
Performance evaluation STD NC Black Chip Vs FW2 Pigment Paste using JC8061
As the result testing of disperse carbon black pigment FW2 with JebChem 8061 can achieved high gloss without
mixed with NC black chip. And other basic pigment paste properties viscosity and fineness have no different
significant. And in addition, the observation of dispersing ability are not difficult to operate.
Stability test over 7 day at 60 degree of Celsius haven’t seen changed or increase in viscosity and fineness compare
to the initial result showed good stability performance.
45. 34
JEBCHEM 8110
Dispersing for Solvent Base Coating – General
The evaluation of JebChem Dispersing Agent Compared to Competitor product in White Base Long Oil System
S
TD Competitor J
C 8110
B 110 JC 8110
As test result found JebChem 8110 provide good dispensability of
Titanium past show desirable whiteness , opacity ,gloss and viscosity
46. 16
JEBCHEM 8163
Evaluation dispersing agent JebChem 8163 and 8531 for FW200 carbon black (S/B)
Improving CB paste formulation to increase the productivity, reduce grinding time,higher color strength
JebChem 8531provided avery superior dispersant for PremiumAuto OEC & Refinish
