4. Why do they used the term bio?
Essentially, bioplastics are bio-based, biodegradable, or both.
The term 'bio-based' means that the material or product is at least partly
derived from biomass (plants).
5. Effect of plastic debris
Makes the land infertile due to
its barrier properties.
Burning of plastics generates
toxic emissions.
More than 1 million seabirds
and 10000 marine mammals
die each year as a
consequence.
Hazard to maritime activities
including fishing and tourism
6.
7. Completely
biodegradabl
e
Produced under
various nutrient
&
environmental
conditions
Derived from both the
renewable &
nonrenewable
resources
Need for Biopolymer
7
Vital asset for humanity that cannot be replaced.
An improved alternative to resolve the waste
generation of plastic and also that provides continued
access to plastics is Biopolymer.
Partly or wholly made from biological materials and
not crude oil
8. Biopolymers
Biopolymers are made partly or
wholly from polymers derived from
biological sources such as
microorganisms, sugar cane, potato
starch, or the cellulose from trees,
and are biodegradable with the
action of microorganisms, heat, and
moisture.
Biopolymers are sustainable, carbon
neutral, and are always renewable.
Biopolymers are synthesized as
intracellular carbon and energy
reserves by a variety of
microorganisms, especially when
cultured in limiting nutritional
conditions.
Fig. 1 Schematic diagram of major
biopolymer biosynthesis pathway in
Azotobacter and their export into
extracellular matrix. Involvement of
enzymes and their corresponding
genes are marked with blue color and
in blue color bracket , respectively. The
EPS biosynthesis diagram is partially
adapted from Remmin ghorst and
Rehm (2006b)
10. Properties of Biopolymers
Non Immunogenic
Non Thrombogenic
Non-Toxic
Non Carcinogenic
Carbon Neutral
Renewable
Bio degradable
Sustainable
Biopolymers are referred to as materials that are biodegradable, derived
from both the renewable and nonrenewable resources.
Natural Biopolymers
Synthetic Biopolymers
13. Natural Biopolymers
The term biodegradable implies that it can be broken down into
simpler substances by the activities of living organisms, and
therefore is unlikely to persist in the environment (Gross and Kalra,
2002).
Polynucleotides Polysaccharides
Polypeptides Lipids (Polyesters)
Biopolymers
14. Biodegradable natural polymers
Natural and Synthetic. Synthetic biopolymers include polylactic acid,
polyglactin, and polyhydroxy apatite which are porous and fibrous materials
used for making bone implants, artificial tendon, ligament and artificial blood
vessels.
15. Synthetic Polymers
Synthetic polymers susceptible to biodegradation can be of different
types, e.g. polymers containing hydrolyzable backbone polyesters.
Recent research activity on biodegradable synthetic polymers has often
been focused on the simulation of different biopolymers or polymers
with degradable backbones, e.g. polyanhydrides, polycarbonates,
polylactones, etc.
Other concepts in the search for new biodegradable materials include
the use of microorganisms which can produce polymers, e.g. poly(β-
hydroxybutyrate) (PHB; 1) and copolymers of PHB.
17. Types of bioplastics
Bioplastics
Group 1: Plastics that are
both bio-based and
biodegradable
polylactic acid (PLA) and
polyhydroxalkanoate
(PHA)
Group 2: Bio-based or
partly bio-based non-
biodegradable plastics,
known as ‘drop-ins’
bio-polyethylene (PE),
polypropylene (PP) and
bio-
polyethylene terephalate
(PET)
Group 3: Plastics that are
based on fossil fuel
resources and are
biodegradable
polybutyrate (PBAT) and
polycaprolactone (PCL)
https://www.science.org.au/curious/earth-environment/future-plastics
Drop-ins: they can be processed, used and recycled in existing
facilities and following the same routes as conventional plastics
18. Polyesters
Polyesters are the most widespread used biodegradable
polymeric materials for drug carrier and tissue engineering.
Polyesters can be synthesized either by ring opening
polymerization (ROP) of cyclic ester monomers or
polycondensation of two multifunctional monomers.
Controlled drug delivery system
Tissue engineering
Coating
PHA and PLA are the two most promising biodegradable polymers.
19. Classification of biopolymers based on their nature (A: synthetic, nonrenewable; B: naturally
produced, renewable; and C: synthetic, renewable).
20. Recent Perspectives
Vegetable oil based polyesters
Exploring biodegradable polymer production from
microbes (marine microbes)
In packaging applications, a biodegradable additive
is often included as a way to promote
environmental degradation e.g. starch in
polyethylene (PE).
21. PLA-Corn Plastics
Polylactide or poly(lactic acid), otherwise known as PLA, is a
biodegradable thermoplastic polyester that is manufactured by
biotechnological processes from renewable resources (e.g. corn).
Although other sources of biomass can be used, corn has the advantage
of providing the required high-purity lactic acid. The use of alternative
starting materials (e.g. woody biomass) is being pursued in order to
reduce process costs; however, the number of steps involved in deriving
pure lactic acid from such raw materials means that their use remains
much less cost effective at present.
Poly(lactic acid) (PLA) is produced from the monomer of lactic acid (LA).
PLA can be produced by two well-known processes.
• the direct polycondensation (DP) route
• the ring opening polymerization (ROP) route.
22. Poly Lactic Acid from Corn
https://polymerinnovationblog.com/from-corn-to-poly-lactic-acid-pla-fermentation-in-action/
Lactobacillus genus such
as
Lactobacillus delbrueckii,
L. amylophilus,
L. bulgaricus,
L. leichmanii,
a pH range of 5.4 to 6.4, a
temperature range of 38 to
and a low oxygen
23. Cons of Polylactic Acid (PLA) or “Corn
Plastics”
PLA production depends on large fields of crops
PLA plastics are only compostable in a commercial composting
facility
Improperly disposed PLA plastics can contaminate recycling
processes
24. Polyhydroxyalkanoates (PHAs)
Polyesters of various
hydroxyalkanoates.
Can be synthesized by micro
organisms.
An intra cellular product
accumulate to levels as high
as 90% of the cell dry
weight under conditions of
nutrient stress.
Act as a carbon & energy
reserve.
27. Economic drawbacks in current
production methods
Cost
Raw material availability (agricultural land and
biomasses)
Possibility of industrial and structural application
development (short, medium, long term)
Ageing and durability
Biodegradability and/or compostability of high thickness
moulded part.
28. Research Focus
Identification of alternative cost-effective substrates for the
production of PHA.
Utilisation of agro industrial materials in production of PHB
will ensure the low production cost and also solve the
problem of waste management to certain level.
Continued research and development in this area creates
high quality products.
The three drivers of growth – the importance of brand
image to consumer goods companies, the value of joint
composting and the reduction of litter – will provide the spur
for continued growth in bioplastics across the world.
29. How could the production of PHB from algae be
competitive to the bacterial PHB production?
Helps in mitigating CO2 directly
Ability to grow on range of environment
Reduced production cost
Very few research in the field of algal bioplastics
30. BIODEGRADABLE POLYMERS for
Packaging
One of the most commonly used polymers for packaging purposes is polylactic
acid (PLA). PLA is used for a variety of films, wrappings, and containers
(including bottles and cups).
31. Blends
Both PLA and PHB are fairly hard and brittle materials, and not very
useful for many industrial applications.
On the Use of PLA-PHB Blends for Sustainable Food Packaging
Applications: P(3HB)/PLA blend
Polyhydroxyalkanoates (PHAs), their Blends, Composites and
Nanocomposites
(3HB)/PCL Blends
Ethyl-cellulose (EtC) and PHB
P(3HB)/starch
P(3HB)/chitosan
P(3HB)/cellulose propionate (CP)
P(3HB)/cellulose acetate butyrate (CAB)
32. Biopolymers for Drug Delivery
The following key conditions must be met if any polymeric material is
designed to use for drug delivery application
good biocompatibility of polymeric material and its degradation products;
high hydrophobicity for controlled drug release;
degraded and metabolized completely from the body after implantation;
low melting point (normally < 100 °C) and good solubility in common organic
solvents for device fabrication;
high flexibility, not broken during use and degradation;
low cost.
35. Comparison of different
biodegradation tests for plastics
Angew. Chem. Int. Ed., Volume: 58, Issue: 1, Pages: 50-62, First published: 04 July 2018, DOI: (10.1002/anie.201805766)
36. Degradation of PHB film using garden soil
Degradation of PHB film using microbial sources
PHB film on 0th day PHB film on 20th
day
PHB film on 0th day PHB film on 20th
day
37. Influence of humidity, temperature and
concentration of (suitable) microorganisms
on the biodegradation of PLA in different
environments.
38. ARE BIODEGRADABLE POLYMERS
THE FUTURE?
New ASTM guidelines are under preparation for testing
biodegradable polymers, as opposed to photodegradable and
oxidatively and hydrolytically degradable ones.
Several countries have taken action against non-degradable
polymers, in particular Japan, where the Ministry of International
Trade and Industry conducted a feasibility study on the development
of biodegradable plastics in 1989.
Biopolymers will be developed by microorganisms, chemical
synthesis of biopolymers and the commercial use of natural
macromolecules. A biodegradable plastic research group was also
organized by about 50 companies in 1989 in Japan.
