3. Pengertian obat terlarang
Obat-obatan terlarang terdiri dari narkotik dan
psikotropika.
Narkotika : zat atau obat yang menimbulkan
ketergantungan. Contoh : ganja.
Psikotropika : zat atau obat berkhasiat psikoaktif
menyebabkan perubahan khas pada aktivitas
mental dan perilaku. Contoh : ekstasi
4.
5.
6. UPAYA MENGATASI DAMPAK PENYALAHGUNAAN
OBAT-OBATAN TERLARANG
Preventif (pencegahan)
Pencegahan lebih baik dari pada pemberantasan.
Pencegahan penyalahgunaan Narkoba dapat dilakukan
dengan :
1. pembinaan dan pengawasan dalam keluarga
2. penyuluhan oleh pihak yang kompeten baik di
sekolah dan masyarakat
3. pengajian oleh para ulama
4. pengawasan tempat-tempat hiburan malam oleh
pihak keamanan
5. pengawasan distribusi obat-obatan ilegal
7. Represif (penindakan)
yaitu menindak dan memberantas
penyalahgunaan narkoba melalui jalur
hukum
Kalau masyarakat mengetahui harus segera
melaporkan kepada pihak berwajib dan tidak
boleh main hakim sendiri.
8. Kuratif (pengobatan)
bertujuan penyembuhan para korban baik
secara medis maupun dengan media lain.
Di Indonesia sudah banyak didirikan tempattempat penyembuhan dan rehabilitasi
pecandu narkoba seperti Yayasan Titihan
Respati, pesantren-pesantren, yayasan Pondok
Bina Kasih dll.
9.
Rehabilitatif (rehabilitasi)
Dilakukan agar setelah pengobatan selesai para
korban tidak kambuh kembali “ketagihan”
Narkoba.
Rehabilitasi berupaya menyantuni dan
memperlakukan secara wajar para korban
narkoba agar dapat kembali ke masyarakat
dalam keadaan sehat jasmani dan rohani.
Kita tidak boleh mengasingkan para korban
Narkoba yang sudah sadar dan bertobat, supaya
mereka tidak terjerumus kembali sebagai
pecandu narkoba.
10.
11. Penyebab terjadinya penggunaan
obat-obatan terlarang
Karena stress berat
Untuk melupakan masalah, mencari
jalan keluar yang salah
Terpengaruh teman
Ikut-ikutan
Coba-coba
Karena dianggap keren/gaya jika
memakai obat-obatan terlarang
12.
13. 1) Dampak penyalahgunaan narkoba
terhadap fisik:
Gangguan pada system syaraf (neurologis) seperti
gangguan kesadaran
Pada jantung dan pembulu darah (kardiovaskuler) seperti:
infeksi akut otot jantung, gangguan peredaran darah
Gangguan pada paru-paru (pulmoner) seperti: penekanan
fungsi pernapasan susah nafas
Terhadap kesehatan reproduksi remaja perempuan antara
lain perubahan periode menstruasi, dan amenorhoe (tidak
haid)
Bagi pengguna narkoba melalui jarum suntik tertular
penyakit seperti hepatitis B, C, dan HIV yang hingga saat ini
belum ada obatnya
Penyalahgunaan narkoba bisa berakibat fatal ketika terjadi
over dosis yaitu bisa menyebabkan kematian
14.
15. 2) Dampak penyalahgunaan narkoba
terhadap psikis:
Lamban kerja, ceroboh kerja, sering
tegang dan gelisah
Hilang kepercayaan diri, apatis,
pengkhayal, penuh curiga
Agitatif, menjadi ganas dan tingkah laku
yang brutal
Sulit berkonsentrasi, perasaan kesal dan
tertekan
Cenderung menyakiti diri, perasaan
tidak aman, bahkan bunuh diri
16. 3) Dampak penyalahgunaan narkoba terhadap
lingkungan social:
Gangguan mental, anti-sosial dan
asusila, dikucilkan oleh lingkungan
Merepotkan dan menjadi beban keluarga
Pendidikan menjadi terganggu, masa depan
suram
Editor's Notes
Custom animation effects: motion path text and change color(Intermediate)To reproduce the picture on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert.On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 3” and the Width box is set to 10”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Select the picture. On the Home tab, in the Drawing group, click the arrow under Arrange, point to Align, and do the following:Click Align to Slide.Click AlignCenter.Click Align Top.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box and select the text. On the Home tab, in the Font group, do the following:In the Font list, select Century Gothic.In the Font Size box, enter 30. Click Bold.Click the arrow next to FontColor, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 80, Green: 129, Blue: 226.On the Home tab, in the Paragraph group, click Align Text Left to align the text left in the text box.Drag the text box below the picture, in the middle of the left side of the slide.To reproduce the animation effects for the first text box on this slide, do the following:On the Animations tab, in the Animations group, click Custom Animation.On the slide, select the text box. In the CustomAnimation task pane, do the following:Click AddEffect, point to Entrance, and then click More Effects.In the Add Entrance Effect dialog box, under Subtle, click Fade. Select the animation effect (fade effect for the first text box). Under Modify: Fade, do the following:In theStart list, selectWith Previous. In the Speed list, select Medium.On the slide, select the text box. In the CustomAnimation task pane, do the following:Click AddEffect, point to Motion Paths, and then click Right. Select the second animation effect (right motion path for the first text box). Under Modify: Right, do the following:In theStart list, selectWithPrevious.In the Speed list, select Medium.On the slide, select the text box. In the CustomAnimation task pane, do the following:Click AddEffect, point to Emphasis, and then click More Effects.In the Add Emphasis Effect dialog box, under Basic, click Change Font Color. Select the third animation effect (change font color effect for the first text box). Under Modify: Change Font Color, do the following:In theStart list, selectAfterPrevious.In the Font Color list, select White (first option from the left).In the Speed list, select Fast.On the slide, select the motion path for the text box. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, press and hold SHIFT, and then drag the endpoint to lengthen the motion path about 4”. (Note: It will help to use the ruler to measure the path. On the View tab, in the Show/Hide group, select Ruler.) Right-click the motion path, and then click Reverse Path Direction. To reproduce the other animated text boxes on this slide, do the following:On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Drag the second text box below and to the right of the first text box.Click in the second text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, do the following:In the Font Size list, select 24.Click Bold to unbold the text.Click Italic. On the slide, select the motion path for the second text box. Point to the starting point (green arrow) until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the second text box, until the length of the path is about 4”. Select the first text box. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. On the slide, Drag the third text box until it is below and to the left of the second text box, and to the right of the first text box.Click in the third text box, and then edit the text.Select the text in the third text box. On the Home tab, in the Font group, in the Font Size list, select 24.In the Custom Animation task pane, select the sixth animation effect (change font color effect for the second text box). Under Modify: Change Font Color, in the Speed list, select Fast. On the slide, press and hold CTRL, and then select all three text boxes. In the CustomAnimation task pane, do the following:Click AddEffect, point to Exit, and then click More Effects.In the Add Exit Effect dialog box, under Moderate, click Stretchy. Select the 10th, 11th, and 12th animation effects (stretchy effects for the text boxes). Under Modify: Stretchy, do the following:In theStart list, selectWith Previous. In the Speed list, select Medium.Select the 10th animation effect (stretchy effect for the first text box), and then drag it until it is ninth in the list of effects. Select the 12th animation effect (stretchy effect for the third text box), and then under Modify: Exit, in the Start list, select After Previous.To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until four stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 20%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).Select Stop 3 from the list, and then do the following: In the Stop position box, enter 80%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).Select Stop 4 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left).
Animated series of emerging circles(Intermediate)To reproduce the SmartArt on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Basic Radial (eighth row, second option from the left), and then click OK to insert the graphic into the slide.On the slide, select the SmartArtgraphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top-level bullet, enter the text for the center circle of the graphic. In the second-level bullets, enter the text for all the other shapes in the SmartArt graphic. With the SmartArt graphic still selected, on the Design tab, in the Themes group, click Colors and select Median. Under SmartArtTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5”.In the ShapeWidth box, enter 7.5”.Under SmartArtTools, on the Format tab, in the Arrange group, click Align and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click the More arrow at the SmartArtStyles gallery, and then under Best Match for Document select IntenseEffect (the fifth option from the left).On the Home tab, in the Font group, click the button next to FontColor, and then under ThemeColors select Black, Text 1 (first row, the second option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, under Surface do the following:In the Material list, under SpecialEffect, select SoftEdge (second option from the left).In the Lighting list, under Neutral, select Harsh (first row, the fourth option from the left).In the Angle box, enter 30°.Press and hold CTRL, and select all five shapes in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Shadow in the left pane, and in the Shadow pane do the following:In the Presets list, under Outer, select OffsetBottom (first row, the second option from the left).In the Transparency box, enter 65%.In the Size box, enter 103%.In the Blur box, enter 9 pt.In the Angle box, enter 90°.In the Distance box, enter 3 pt.To reproduce the SmartArt effects on this slide, do the following:On the slide, select the center circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, the first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box enter 12 pt.On the slide, select the top circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors select Orange, Accent 2 (first row, the sixth option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, the first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 20 pt. Also under Bevel, to the right of the Top list, in the Height box enter 15 pt.Press and hold SHIFT, and drag a corner sizing handle towards the center of this circle to make it smaller.On the Home tab, in the Font group, in the Font Size box enter 20 pt.Position the top circle slightly over to the right 0.5”.Select the right circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then ThemeColors select Gold, Accent 4 (first row, the eighth option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, the first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box enter 12 pt.Press and hold SHIFT, and drag a corner sizing handle towards the center of this circle to make it smaller.On the Home tab, in the Font group, in the Font Size box enter 28 pt.Position the right circle slightly towards the upper right corner of the slide.One the slide, select the bottom circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.In the Color list, under ThemeColors select Green, Accent 5 (first row, the ninth option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, select Circle (first row, the first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box enter 12 pt.Press and hold SHIFT, and drag a corner sizing handle away from the center of this circle to make it larger.On the Home tab, in the Font group, in the Font Size box enter 28 pt.Drag the circle slightly toward the right edge of the slide.On the slide, select the left circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.In the Color list, under ThemeColors select Olive Green, Accent 3 (first row, the seventh option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, the first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 30 pt. Also under Bevel, to the right of the Top list, in the Height box enter 30 pt.Press and hold SHIFT, and drag a corner sizing handle towards the center of this circle to make it smaller.On the Home tab, in the Font group, in the Font Size box enter 40 pt. and click Bold.Position the top circle slightly towards the bottom of the slide.To reproduce the line effects on this slide, do the following:Press and hold CTRL and select each of the four lines connecting the circles in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Line Color in the left pane, and in the Line Color pane do the following:Click Gradient line.In the Type list, select Linear.In the Direction list, select Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear on the slider, then customize the gradient stops as follows:Select Stop 1 on the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 100%.Also in the FormatShape dialog box, clickLineStyle in the left pane, and in the LineStyle pane do the following:In the Width box, enter 3.5 pt.In the Dashtype list, select RoundDot (second option from the top).To reproduce the animation effects on this slide, do the following:On the Animation tab, in the Advanced Animations group, click Animation Pane. On the slide, select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click MoreEntrance Effects. In the ChangeEntranceEffect dialog box, under Moderate, select Basic Zoom, and then click OK.In the Animation group, click Effect Options and do the following:Under Direction, click In from ScreenCenter.Under Sequence, click One by one.In the CustomAnimation task pane, expand the contents by clicking the double arrow under the zoom entrance effect, and then do the following:Select the first effect (zoom entrance effect), and in the Timing group, in the Start list, select WithPrevious.Select the second effect (zoom entrance effect). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery, and under Entrance, click Wipe, and click OK.With the second effect (now wipe effect) still selected, do the following:In the Animation group, click Effect Options, and then under Direction, select FromBottom.In the Timing group, in the Delay list, enter 00.50.In the Timing group, in the Duration list, enter 00.50.Select the fourth effect (zoom entrance effect). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery, and under Entrance, click Wipe, and click OK.With the fourth effect (now wipe effect) still selected, do the following:In the Animation group, click Effect Options, and then under Direction, select From Left.In the Timing group, in the Delay list, enter 00.50.In the Timing group, in the Duration list, enter 00.50.Select the sixth effect (zoom entrance effect). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery, and under Entrance, click Wipe, and click OK.With the sixth effect (now wipe effect) still selected, do the following:In the Animation group, click Effect Options, and then under Direction, select From Left.In the Timing group, in the Delay list, enter 00.50.In the Timing group, in the Duration list, enter 00.50.Select the eighth effect (zoom entrance effect). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery, and under Entrance, click Wipe, and click OK.With the eighth effect (now wipe effect) still selected, do the following:In the Animation group, click Effect Options, and then under Direction, select From Right.In the Timing group, in the Delay list, enter 00.50.In the Timing group, in the Duration list, enter 00.50.To reproduce the background on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction, list click From Center (third option from the left)in the drop-down list.Under Gradient stops, click Add or Remove until two stops appear on the slider, then customize the gradient stops as follows:Select Stop 1 on the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). Select Stop 2 on the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1 (first row, second option from the left).
Custom animation effects: spinning clip art with text(Intermediate)To reproduce the clip art on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click Clip Art.In the Clip Art pane, in the Search for box, enter j0435540. In the Search in list, select Everywhere, and then click Go. Select the clip art file in the pane to insert it into the slide. (Note: If you choose another clip art file, the clip art must be in the Windows Metafile format [.wmf].)On the slide, select the clip art. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 5.83”.In the Shape Width box, enter 8.12”.On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.In the Microsoft Office PowerPoint dialog box, click Yes. On the slide, select the converted clip art. On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the top-level group. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup. Also in the Selection and Visibility pane, select the Autoshape object, and then press DELETE. Press CTRL+A to select all of the objects on the slide. On the Home tab, in the Drawing group, click Arrange, and then click Group.Select the group. On the Home tab, in the Drawing group, click Shape Effects, point to Preset, and then under Presets click Preset 8 (second row, fourth option from the left). With the group still selected, under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher, and do the following:On the Size tab, in the Height box, enter 6.27”.On the Size tab, in the Width box, enter 6.27”.On the Position tab, in the Horizontal box, enter 3.89”. On the Position tab, in the Vertical box, enter 1.55”To reproduce the text on this slide, do the following:On the Insert tab, in the Text group, click TextBox.Drag to draw a text box on the slide.In the text box, enter text and select it. On the Home tab, in the Font group do the following:In the Font list, select Candara.In the FontSize box, enter 32 pt.In the FontColor list, under StandardColors select Orange (third option from the left). Click Italic. Select the text box on the slide, and then under DrawingTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 7.29”.In the ShapeWidth box, enter 7.29”.Under DrawingTools, on the Format tab, in the WordArtStyles group, click TextEffects, point to Transform, and under FollowPath select ArchUp (first option from the left).To wrap the text upside down, at the bottom of the text box, drag the pink adjustment diamond from the center left position in the text box to the lower right corner of the text box. With the text box still selected, under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher, and then on the Position tab do the following:In the Horizontal box, enter 3.38”. In the Vertical box, enter 1.04”.To reproduce the animation effects on this slide, do the following:On the Animation tab, in the Animations group, click CustomAnimation.Select the circle clip art on the slide, and then in the CustomAnimation task pane, do the following:Click AddEffect, point to Emphasis effect and select MoreEffects. In the AddEmphasisEffect dialog box, under Basic select Spin, and then click OK.Click the arrow to the right of the spin emphasis effect, select Effect Options,and do the following:On the Effect tab, under Settings, in the Amount list, select QuarterSpin.On the Effect tab, under Settings, in the Amount list, select Counterclockwise.On the Timing tab, in the Start list, select WithPrevious.On the Timing tab, in the Speed box enter4.0 seconds.Click OK.On the slide, select the text box, and then in the CustomAnimation task pane, do the following:Click the AddEffect, point to Entrance and select MoreEffects. In the AddEntranceEffect dialog box, under Subtle select Fade, and then click OK.Select the fade entrance effect (second effect), and under Modify: Fade do the following:In the Start list, select WithPrevious.In the Speed list, select Slow. With the text box still selected, click AddEffect, point to Emphasis and select MoreEffects. In the AddEmphasisEffect dialog box, under Basic select Spin, and then click OK.Select the spin emphasis effect (third effect), and under Modify: Spin do the following:In the Start list, select WithPrevious.In the Amount list, select HalfSpin.In the Speed list select Slow. With the text box still selected, click AddEffect, point to Emphasis and select MoreEffects. In the AddEmphasisEffect dialog box, under Basic select Spin, and then click OK.Click the arrow to the right of the spin emphasis effect (fourth effect), select Effect Options,and do the following:On the Effect tab, under Settings, in the Amount list, in the Custom box enter 30°, and then press ENTER.On the Effect tab, under Settings, in the Amount list, select Counterclockwise.On the Timing tab, in the Start list, select WithPrevious.On the Timing tab, in the Delay box enter 3.0 seconds.On the Timing tab, in the Speed box enter1 seconds (Fast).Click OK.To reproduce the background on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.In the Direction, list click Linear Down (first row, second option from the left)Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1, Lighter 50% (second row, second option from the left).