2. PENGENALANPENGENALAN
Umumnya, Huraian Sukatan Pelajaran Tahap 2 tertakluk kepada
Umumnya, Huraian Sukatan Pelajaran Tahap 2 tertakluk kepada
sukatan pelajaran yang digunakan untuk PdP BM tahap 2, iaitu
sukatan pelajaran yang digunakan untuk PdP BM tahap 2, iaitu
tahun 4, 5 & 6.tahun 4, 5 & 6.
Dokumen penting yang digunakan untuk mata pelajaran BM
Dokumen penting yang digunakan untuk mata pelajaran BM
KBSR tahap 2.KBSR tahap 2.
Telah diedarkan oleh Pusat Perkembangan Kurikulum,
Kementerian Pelajaran Malaysia.
3. Perincian sukatan pelajaran dihuraikan dalam dokumenPerincian sukatan pelajaran dihuraikan dalam dokumen
yang dikenali sebagai huraianyang dikenali sebagai huraian
Sukatan pelajaran (HSP) bagi setiap tahun persekolahan.Sukatan pelajaran (HSP) bagi setiap tahun persekolahan.
Huraian Sukatan Pelajaran dipersembahkan dalam tigaHuraian Sukatan Pelajaran dipersembahkan dalam tiga
lajur. Lajur pertama ialahlajur. Lajur pertama ialah
pernyataan Hasil Pembelajaran seperti yang terdapatpernyataan Hasil Pembelajaran seperti yang terdapat
dalam Sukatan Pelajaran. Lajurdalam Sukatan Pelajaran. Lajur
kedua ialah Huraian Hasil Pembelajaran, Dan Lajur ketigakedua ialah Huraian Hasil Pembelajaran, Dan Lajur ketiga
ialah Cadangan Aktiviti / Nota.ialah Cadangan Aktiviti / Nota.
Perincian sukatan pelajaran dihuraikan dalam dokumenPerincian sukatan pelajaran dihuraikan dalam dokumen
yang dikenali sebagai huraianyang dikenali sebagai huraian
Sukatan pelajaran (HSP) bagi setiap tahun persekolahan.Sukatan pelajaran (HSP) bagi setiap tahun persekolahan.
Huraian Sukatan Pelajaran dipersembahkan dalam tigaHuraian Sukatan Pelajaran dipersembahkan dalam tiga
lajur. Lajur pertama ialahlajur. Lajur pertama ialah
pernyataan Hasil Pembelajaran seperti yang terdapatpernyataan Hasil Pembelajaran seperti yang terdapat
dalam Sukatan Pelajaran. Lajurdalam Sukatan Pelajaran. Lajur
kedua ialah Huraian Hasil Pembelajaran, Dan Lajur ketigakedua ialah Huraian Hasil Pembelajaran, Dan Lajur ketiga
ialah Cadangan Aktiviti / Nota.ialah Cadangan Aktiviti / Nota.
Penerangan Tentang HuraianPenerangan Tentang Huraian
Sukatan PelajaranSukatan Pelajaran
HSP
5. HASIL PEMBELAJARANHASIL PEMBELAJARAN
Membantu guru menjalankanMembantu guru menjalankan
pengukuran & penilaianpengukuran & penilaian
pencapaian muridpencapaian murid
Ditafsirkan daripadaDitafsirkan daripada
objektif kurikulum sesuatuobjektif kurikulum sesuatu
mata pelajaranmata pelajaran
Dapat dicapai denganDapat dicapai dengan
menggabungjalinkanmenggabungjalinkan
Kemahiran Bahasa, SistemKemahiran Bahasa, Sistem
Bahasa & Pengisian KurikulumBahasa & Pengisian Kurikulum
Petunjuk tentang kemahiranPetunjuk tentang kemahiran
yang perlu dikuasai muridyang perlu dikuasai murid
Membantu guru memilihMembantu guru memilih
kandungan, kaedah, sumber &kandungan, kaedah, sumber &
prosedur pengajaranprosedur pengajaran
6. Hasil pembelajaran utama, khusus dan aktiviti pembelajaran untuk matapelajaran
Bahasa Melayu memberi penekanan kepada kemahiran bahasa.
Hasil pembelajaran utama, khusus dan aktiviti pembelajaran untuk matapelajaran
Bahasa Melayu memberi penekanan kepada kemahiran bahasa.
Kemahiran bahasa yang dimaksudkan ialah kemahiran mendengar dan bertutur
(lisan), kemahiran membaca dan kemahiran menulis.
Kemahiran bahasa yang dimaksudkan ialah kemahiran mendengar dan bertutur
(lisan), kemahiran membaca dan kemahiran menulis.
Kemahiran Bahasa Aktiviti
Mendengar & Bertutur •Berbual
•Bercerita
•Menyampaikan maklumat & berbincang
Membaca •Membaca kuat
•Membaca & memahami maklumat
•Membaca – menaakul – menghayati teks
Menulis •Menggunakan pelbagai jenis ayat
•Mencatat & menyusun maklumat serta menghasilkan
penulisan kreatif & bukan kreatif.
8. PENOMBORAN HASIL PEMBELAJARANPENOMBORAN HASIL PEMBELAJARAN
UTAMA & KHUSUS KEMAHIRAN BAHASAUTAMA & KHUSUS KEMAHIRAN BAHASA
Kemahiran Bahasa Hasil Pembelajaran Utama Hasil Pembelajaran
Khusus
Mendengar & Bertutur 1.0 1.1, 1.2, 1.3, 1.4, 1.5, 1.6
2.0 2.1, 2.2
3.0 3.1, 3.2, 3.3
4.0 4.1, 4.2, 4.3, 4.4
Membaca 5.0 5.1, 5.2
6.0 6.1, 6.2, 6.3, 6.4, 6.5, 6.6
7.0 7.1, 7.2, 7.3,
Menulis 8.0 8.1, 8.2, 8.3, 8.4, 8.5, 8.6
9.0 9.1, 9.2, 9.3
10.0 10.1, 10.2, 10.3
11.0 11.1, 11.2, 11.3, 11.4
9. CONTOH HSP BM TAHUN 4
Hasil Pembelajaran Huraian Hasil
Pembelajaran
Cadangan Altiviti / Sumber
/ Catatan
11.0 Membuat ulasan
tentang bahan yang
didengar, dibaca, atau
ditonton.
11.2 Mengulas karya
bukan sastera dari segi
penggunaan perkataan,
idea, ayat, wacana, dan
nilai dan pengajaran.
Kemahiran bahasa
Hasil Pembelajaran
Aras 1
i.Mengecam maklumat
yang terdapat dalam teks.
ii.Menyatakan pandangan
tentang mesej dan nilai
yang terdapat dalam
bahan.
Huraian kemahiran
berbahasa
•Membaca dan memahami
karya berunsur ilmu.
•Memberikan pendapat
mengenai teks yang
dibaca.
Cadangan Altiviti / Nota
10. CADANGANCADANGAN
AKTIVITI/NOTAAKTIVITI/NOTA
Lajur ketiga.
Mengandungi cadangan aktiviti PdP dan bahan bantu
belajar.
Disesuaikan dengan huraian hasil pembelajaran dan
mengambil kira elemen yang terkandung dalam
pengisian kurikulum.
Contoh : Kemahiran meramal dan membuat pilihan
menggunakan kajian masa depan.
Lajur ketiga.
Mengandungi cadangan aktiviti PdP dan bahan bantu
belajar.
Disesuaikan dengan huraian hasil pembelajaran dan
mengambil kira elemen yang terkandung dalam
pengisian kurikulum.
Contoh : Kemahiran meramal dan membuat pilihan
menggunakan kajian masa depan.
11. CONTOHCONTOH
AKTIVITIAKTIVITI
Aktiviti pengajaran dan pembelajaran Bahasa Melayu KBSRAktiviti pengajaran dan pembelajaran Bahasa Melayu KBSR
tahap 2 ini memaparkan hasil pembelajaran, huraian hasiltahap 2 ini memaparkan hasil pembelajaran, huraian hasil
pembelajaran yang perlu dipilih menjadi fokus utama ataupembelajaran yang perlu dipilih menjadi fokus utama atau
fokus sampingan.fokus sampingan.
Fokus utama merujuk kepada hasil pembelajaran yangFokus utama merujuk kepada hasil pembelajaran yang
menjadi keutamaan dalam pengajaran dan pembelajaran.menjadi keutamaan dalam pengajaran dan pembelajaran.
12. CONTOH RANCANGAN PENGAJARANCONTOH RANCANGAN PENGAJARAN
HARIANHARIAN
Tahun : 5 Sejarah
Bilangan Murid : 20 orang
Tarikh : 20 Ogos 2014
Hari : Rabu
Masa : 10.30 pagi – 11.30 pagi
Matapelajaran : Bahasa Malaysia
Tema : Sekolah
Tajuk : Jangan Menuduh
13. CONTOH RANCANGAN PENGAJARANCONTOH RANCANGAN PENGAJARAN
HARIANHARIAN
HASIL PEMBELAJARAN
FOKUS UTAMA
5.1 Membaca Kuat perkataan dan ayat dengan
sebutan dan intonasi yang betul dan memahami
perkara yang dibaca.
Aras 1
Membaca perkataan, frasa dan ayat yang mengandung
ayat tunggal dan ayat majmuk dengan sebutan dan
intonasi yang betul
14. CONTOH RANCANGAN PENGAJARANCONTOH RANCANGAN PENGAJARAN
HARIANHARIAN
FOKUS SAMPINGAN
1.1 Berbual tentang sesuatu perkara berkaitan
kehidupan seharian dengan menggunakan kata,
ungkapan,ayat, sebutan intonasi dan nada yang sesuai.
Aras 1
Menggunakan kata panggilan yang sesuai mengikut
situasi dalam perbualan.
15. CONTOH RANCANGAN PENGAJARANCONTOH RANCANGAN PENGAJARAN
HARIANHARIAN
OBJEKTIF
Pada akhir pengajaran dan pembelajaran, murid
dapat:
1.Membaca dialog dengan lancer dengan sebutan dan
intonasi yang betul.
2.Menggunakan sisitem panggilan dan sapaan yang
betul serta sesuai semasa berinteraksi.
3.Membaca dan mengenal pasti ayat tunggal dan ayat
majmuk daripada teks yang dibacakan.
16. CONTOH RANCANGAN PENGAJARANCONTOH RANCANGAN PENGAJARAN
HARIANHARIAN
SISTEM BAHASA : Kata Panggilan, Ayat Majmuk
ILMU : Pendidikan Moral
NILAI : Bertanggungjawab
KEMAHIRAN BERNILAI TAMBAH (KBT)
Kemahiran Berfikir : Menghubungkaitkan
Kemahiran Belajar : Membaca, Menulis, Menyoal
Kecerdasan Pelbagai : Interpersonal
BBM : Komputer riba, Pemancar LCD, Kad Perkataan. Sampul
Surat, Kertas Sebak, Pen Maker, Dialog.
PENGETAHUAN SEDIA ADA : Murid menggunakan kata
panggilan dan ayat-ayat majmuk dalam kehidupan seharian
17. CONTOH RANCANGAN PENGAJARANCONTOH RANCANGAN PENGAJARAN
HARIANHARIAN
LANGKAH/
MASA
ISI PELAJARAN AKTIVITI P & P CATATAN
Set Induksi
(5 minit)
Rakaman Video Mencuri di
kompleks membeli belah.
Soalan
Apakah yang disaksikan di
skrin?
Di mana situasi ini berlaku?
Adakah anda pernah
mengalami situasi begini?
3 jawapan murid dikaitkan
dengan tajuk hari ini.
1.Seorang pencuri sedang
mencuri
2.Di kedai menjual telefon
3.Jawapan murid-murid.
1. Guru menayangkan
rakaman video
seorang pencuri
mencuri barangan
di kedai telefon.
1. Guru bersoal jawab
dengan murid.
KB:
menghubungkait
BCB: melihat
dengan teliti
BBB: Komputer
riba, pemancar
LCD.
KBT: kemahiran
berfikir
18.
19. Sambungan…Sambungan…
LANGKAH/
MASA
ISI PELAJARAN AKTIVITI P & P CATATAN
Langkah 1
(10 minit)
Dialog
Jangan Menuduh
Kata Panggilan
Azma
Malim
Tahir
Kamu
Saya
Dia
Cikgu
kita
1. Murid diedarkan teks
dialog.
2. Guru meminta beberapa
orang murid membaca
dialog dengan sebutan dan
intonasi yang betul.
3. Guru meminta beberapa
orang untuk melakonkan
dialog tersebut.
4. Murid diminta
menyenaraikan kata
panggilan yang terdapat
dalam dialog tersebut.
BCB : membaca
dengan lancar
KBT : kemahiran
Membaca
BBB : Kad perkataan
20. ( Kamu Dan Azma berada di sudut kantin sekolah )( Kamu Dan Azma berada di sudut kantin sekolah )
Malim : Mengapa kamu bermuram saja, Azma? Apakah
kamu ada masalah?
Azma : Duit saya sebanyak sepuluh ringgit telah hilang
Malim.
Malim : Macam mana boleh hilang?
Azma : Saya letakkan dalam beg. Balik dari rehat sahaja
duit dah tak ada. Saya syak Tahir yang curi,sebab waktu rehat dia
tak keluar.
Malim : Bukankah cikgu selalu menasihati agar duit jangan
ditinggalkan dalam beg. Sekarang sudah hilang, mengapa pula
menuduh tanpa usul periksa?
Azma : Jika bukan Tahir, siapa lagi? Saya pasti memang
Tahir! Dia dengkikan saya!
Malim : Jangan sesekali serkap jarang. Jika bukan dia,
bagaimana kita mahu tutup muka kita? Baik kita jumpa Cikgu
Zaidi. Guru disiplin itu boleh membantu kita.
Azma : Betul juga kata kamu, Malim. Saya berasa bangga
21. Sambungan…Sambungan…
LANGKAH/
MASA
ISI PELAJARAN AKTIVITI P & P CATATAN
Langkah 2
(25 minit) Ayat Tunggal:
Azma berasa sedih.
Duit Azma hilang.
Malim pergi ke kantin.
Azma pergi ke kantin.
Mereka keluar dari kelas.
Mereka berjumpa dengan guru
disiplin.
Ayat Majmuk:
Duit saya sebanyak sepuluh ringgit
telah hilang.
-duit saya sepuluh ringgit
-duit saya hilang
1. Murid diminta memilih
ayat tunggal dan ayat
majmuk yang terdapat
dalam dialog tersebut.
2. Murid membacakan ayat
tunggal dan majmuk yang
telah dipilih daripada teks
yang dibacakan.
3. Guru memberi beberapa
ayat tunggal kepada
murid.
4. Murid diminta menulis
dan membacakan ayat
majmuk demgan
menggunakan kata
hubung yang sesuai.
5. Guru menyemak jawapan
murid.
KB: menghubungkait
Nilai:
Bertanggungjawab
Jujur
BBB: Komputer riba,
Pemancar LCD.
22. Sambungan…Sambungan…
LANGKAH/
MASA
ISI PELAJARAN AKTIVITI P & P CATATAN
Langkah 3
(20 minit)
Kumpulan 1 & 4:
pengawas
menangkap
seorang pelajar
yang mencuri di
kelas.
Kumpulan 2 & 5:
Pihak kantin
menangkap pelajar
yang mencuri
makanan di kantin
sekolah.
Kumpulan 3 & 6:
Guru disiplin
menangkap pelajar
yang mencuri di
bilik guru.
1. Kelas dibahagikan kepada enam
kumpulan.
2. Setiap kumpulan diberi satu
situasi yang berlainan.
3. Guru meminta murid
melakonkan situasi tersebut
dengan menggunakan kata
panggilan yang sesuai.
4. Murid-murid diminta
melakonkan situasi tersebut di
hadapan kelas.
5. Guru meminta kumpulan lain
untuk menyenaraikan kata
panggilan yang digunakan dalam
setiap lakonan kumpulan lain.
KP:
Interpersonal
Nilai Murni:
Jujur
BBB: Sampul
Surat
23. Sambungan…Sambungan…
LANGKAH/
MASA
ISI PELAJARAN AKTIVITI P & P CATATAN
Penutup
(5 minit)
Rakaman video:
Mencuri di pusat
membeli belah
Nilai-nilai murni:
Bertanggungjawab
jujur
1. Guru menayangkan rakaman
video kepada murid-murid.
2. Guru meminta murid untuk
memberi pendapat tentang
rakaman video tersebut.
3. Guru mengakhiri pelajaran
dengan menetapkan nilai-nilai
murni berdasarkan rakaman
video yang telah disaksikan.
KB:
menghubungkait
Nilai:
Bertanggungjawab
Jujur
BBB: Komputer
riba, Pemancar
LCD.
Pemulihan:
Mengisi tempat kosong dengan kata hubung yang betul. Menulis semula ayat
majmuk yang telah diisikan dengan kata hubung yang sesuai.
Pengayaan:
Menulis ayat majmuk berdasarkan ayat tunggal yang diberi.
Pemulihan:
Mengisi tempat kosong dengan kata hubung yang betul. Menulis semula ayat
majmuk yang telah diisikan dengan kata hubung yang sesuai.
Pengayaan:
Menulis ayat majmuk berdasarkan ayat tunggal yang diberi.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
Picture with background removed
(Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.
Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.
On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Middle.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture.
Also under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” height and 3.24” width). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also under Picture Tools, on the Format tab, in the Adjust group, click Remove Background, and then do the following:
To remove additional background areas from the picture, on the Background Removal tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.
To keep additional areas of the picture that have been removed, on the Background Removal tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.
Click Keep Changes in the Close group when finished.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, select Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 40%.
Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.
In the Transparency box, enter 0%.
Select the third stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 90%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:
In the Font list, click Calisto MT.
In the Font Size list, click 36 pt.
Click Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Position text over the least transparent part of the gradient.
