The document lists and describes the main parts of a lathe machine: The Norton box fixes the steps for threading pieces. The large stone bench supports guides and has internal ribbing. The face plate supports and adjusts material. The longitudinal carriage supports and guides the cutting tool and allows advancing movement. The cross slide provides perpendicular motion for sideways tool movement. The splinde is a threaded bar that extends from the head to the counterpoint and engages the head. The tailstock supports very long pieces that rotate. The brake stops the machine in emergencies. The spindle speed selector adjusts spindle speed. The emergency stop button cuts power. The motor start button powers the electric drive motor. The toolpost holds cutting tools.

1. PARTS OF THE
LATHE
MACHINE

2. NORTON BOX
The Norton box is a mechanism formed of
several gears for to fix the steps of the
pieces to thread. (cut a screw).

3. LARGE STONE BENCH
This is a piece made of foundry, very rigid
and robust with internal ribbing. In your
higher part carry the guides for the cars. To
your left are find the principal head and to
the right the conterpoint.

5. Face plate
It supports and adjust the material for to
make the pieces.

6. LONGITUDINAL CORRIEGE
It Comprising the compound carriage,
carrying tools and apron. Since the carriage
supports and guides the cutting tool, it must
be rigid and built with precision. It is moves
on guides of the bench printing advancing
movement to the tool

8. CROSS SLIDE
The cross slide provides a motion
perpendicular to the longitudinal carriage,
and the tool can have a sideways
movement as a result of the composition of
the longitudinal and transverse.

10. SPLINDE
The splinde is a long and threaded bar,
located below the bed guides extending
from the head to the counterpoint. It is
engaged to the head so that its rotation
can be reversed and adjusted to the
longitudinal.

12. tailstock
It is mount on the guides of the large stone
bench. Your function are support the pieces
that rotate when this are very long.

13. BRAKE
The brake is use for to stop in case of
emergence the lathe machine.

14. Cabinet leg
It is the support of the lathe machine.

15. Spindle speed selector
The spindle speed selector allows the
operator to adjust the spindle speed of
the machine.

16. Emergency Stop Button
The emergency stop button turns off the
power to the machine.

17. Motor Start Button
The motor start button starts the electric
drive motor for the machine. The motor start
button does not control the spindle
however, it does supply the power.

18. toolpost
It is a device that hold the tool of cutting as
a burin.

19. clutch
It regulates speed of the engine.

20. MEMBERS
 Giovanny Duran Valencia.
 Duvan Felipe Saavedra Yaima.