The new world energy market is leading more and more toward highly efficient power plants together with the necessity of fulfill new stringent limits for the environmental emissions. We offer Power Plants that show peculiar advantages in this way allowing fuel economisation through the exploitation of the flue gas heat thermal power produced by the gas turbine upper cycle in a bottom steam cycle, a larger range of flexibility strategies for power production, an optimisation of the whole plant efficiency and a limited environmental impact.
Craig & Rupert Denis Limited, a distinguished player in the energy industry, providing reliable and flexible solutions across a complete and innovative product portfolio in the power generation field: equipment and plant design, engineering, manufacturing, contracting, service and customer assistance.
We are international turn-key power plant provider designing and manufacturing several plant types: thermal, geothermal, combined cycle, cogeneration and many activities for nuclear power plants. According to the market demand, the core business focuses on combined cycle power plants supplied n a wide range of generating capacities from 100 to1,600 MW.
From Event to Action: Accelerate Your Decision Making with Real-Time Automation
CRDENERGY MGT BROCHURE
1. Craig & Rupert Denis Limited
, www.crdenergy.com
The new world energy market is leading more and more toward highly efficient power
plants together with the necessity of fulfill new stringent limits for the environmental
emissions. We offer Power Plants that show peculiar advantages in this way allowing fuel
economisation through the exploitation of the flue gas heat thermal power produced by the
gas turbine upper cycle in a bottom steam cycle, a larger range of flexibility strategies for
power production, an optimisation of the whole plant efficiency and a limited
environmental impact.
Craig & Rupert Denis Limited, a distinguished player in the energy industry, providing
reliable and flexible solutions across a complete and innovative product portfolio in the
power generation field: equipment and plant design, engineering, manufacturing,
contracting, service and customer assistance.
We are international turn-key power plant provider designing and manufacturing several
plant types: thermal, geothermal, combined cycle, cogeneration and many activities for
nuclear power plants. According to the market demand, the core business focuses on
combined cycle power plants supplied n a wide range of generating capacities from 100
to1,600 MW.
… epic of affordable energy
2. …Tailored solutions
PRODUCTS TAILORED TO YOUR NEEDS
The main application is gas turbine Combined Heat and Power (CHP) / Cogeneration. In this configuration heat
recovery from the gas turbine exhaust improves plant efficiency to greater than 85%. Our generators can be
powered by steam and gas turbines and allow our customers to create the optimal systems at power plants of any
size.
RELIABILITY, INNOVATION AND A CUSTOMER ORIENTED APPROACH
Craig & Rupert Denis limited offers a complete range of heavy duty gas turbines for power generation applications,
allowing customers to equip their combined-cycle and open-cycle power plants with gas turbines that are
competitive in terms of all market drivers: efficiency, power output, reliability, operational and fuel flexibility,
emission levels and cost-effectiveness; the gas turbines combine the company’s proven designs, manufacturing
capabilities and commissioning skills with its well known flexibility in matching customer needs with tailored
solutions.
A WIDE AND COMPLETE PRODUCT RANGE
The Craig & Rupert Denis limited product portfolio, which includes both varieties of gas turbines, covers all power
generation applications in order to meet customer requirements:
turn-key open and combined cycle power plants
integrated thermal cycles for power islands
stand-alone units (equipped with electrical generator, turboset auxiliaries and control system), as a package
for industrial Companies or EPC contractors.
3. STATE-OF THE-ART MANUFACTURING TECHNOLOGY
In order to meet the challenge of increasing market competitiveness, the company has invested heavily in human
resources, advanced technology and new products. A significant portion of the investment has been spent on
consolidating and upgrading manufacturing facilities. Full supply chains have been developed for all components,
including high technology ones, to deliver manufacturing process excellence.
A CUSTOMISED GAS TURBINE CONTROL SYSTEM
The control system has been designed specifically to meet the stringent requirements of new generation, advanced
performance gas turbines, while at the same time offering customers familiarity and ease of maintenance. System
development has drawn on know-how gathered during the implementation of hundreds of fossil and industrial steam
turbine applications.
A modular architecture makes it possible to accommodate the full range of customer requirements by adding pre-
assembled hardware and software modules.
Control, protection and sequence functions are handled separately, but created using the same functional blocks and
uniform technology.
All products are subject to continuous improvement, in line with the challenges posed by the energy market evolution:
environmental sustainability
operating life extension
flexibility increase
performance optimization
4. …Convenience, simplicity and flexibility
The design and manufacturing technology of the generators guarantee the high maintainability of the equipment
that at great extent reduces the possible future costs of our customers. Moreover, these generators with the
minimum costs can be assembled on the existing foundations of the retired turbogenerators of the same capacity
class air and hydrogen cooling system.
Flexiblity to meet the requirements of the new free electric market. New power plants should have long lifetime
and high flexibility to hold heavy and continuous load cycles with frequent daily start-up and shut-down.
Our Principe designs power plants from base load to reliable daily start-up and shut down with its proper features.
Flexibility packages to be retrofitted on existing combined cycles have been studied to obtain flexible power plants
reaching the following aims: plant grid support improvement; minimum environmental load reduction; start-up time
reduction and start up-time procedure optimization. The above packages can be provided alone or together
depending on client requirements.
5.
6. . …Consulting/Specialist Areas
ENERGY OPTIMISATION
The whole is idea is how to reduce your energy cost to least minimal volume in face of climbing energy prices, we
can help you to reduce your operating cost with a few, very effective steps. The total energy balance of your
company/district is made visible by analysis of potentials. Existing weaknesses are identified and optimal energy-
saving solutions are proposed by our expert engineers.
NO PROFITABLE INVESTMENT IS MADE WITHOUT SOUND ADVICE
CRD offers comprehensive consulting services for your investment project. We provide you with close support from
the project idea through to handover and beyond, with a wide-ranging after-sales service.
IT STARTS WITH AN IDEA
The fast technical progress requires efficient, cost and energy-saving processes. Therefore, the development of new
processes, but also the optimization of existing processes is an important part of our services.
CUSTOMER ORIENTED SERVICES: COMMISSIONING AND AFTER SALES
We offers a full range of services and qualified personnel for erection and/or supervision, start-up and testing. The
availability of standard arrangements and in some cases packaged solutions ensures rapid, problem-free erection,
start-up and commissioning. We provides technical assistance services worldwide, available 24 hours a day, 7 days a
week, in the fields of maintenance, spare parts supply and preventive maintenance programs, so ensuring that
customers are in the best position to achieve optimum operation. Continuous process improvements guarantee the
best assistance for our customers: for example, the latest maintenance procedures include extended spare parts
stocks and streamlined logistics.
FLEXIBLE ARRANGEMENT FOR TRANSPORTATION
The.overall,dimensions,of,turbogenerators,comply.with,rail.transport limits. Turbogenerators for gas turbines can be
transported in assembled form, reducing shipping costs and simplifying on-site erection and alignment work. In
special cases generators can be shipped only partially assembled for completion on site.
The entire delivery forms a fully functional unit. The delivery includes complete installation, testing, debugging and
commissioning of the equipment.
7. Project financing description
•Financing plan based on a comprehensive
economic analysis of the project.
•Minimum invested equity is 20 % of total
project costs
•Return on investment of the project ranges
between 8 and 10 years
•Beginning of repayment of a loan is within 6
months from putting the plant into operation
Project Financing
We will carry out comprehensive economic analysis of the entire project and propose the best financing for the
customer, based on the results of the analysis. Hence, complete delivery and construction of power generation
equipment, assembly and putting into operation will also include financing of the entire project in co-operation with
banks and financial institutions. This approach will impose the minimum requirements on the customer´s own capital.
Our goal is not only supplying turbo-set or power generation equipment to our customers, but also finding the
optimum financial solution of the entire project with the minimum financial burden of the customers.
Energy contracting
We will completely ensure delivery and installation of the turbine generator unit, including accessories and
modernization of the existing systems or construction of new power engineering facilities. The entire capital
investment is repaid by way of sale or consumption of electrical energy according to the contractual model agreed
upon.
This means that customers need not invest their own capital. The risks connected with construction are fully on
the supplier's part, as is the responsibility for energy management (i.e. maintenance, operation and servicing of
equipment). In the case of projects of this type, the complete turbine generator unit, including accessories, is
transferred to the customer free-of-charge after repayment of the capital investment.
The customers need not take care of the equipment for the entire term of repayment of the turbine generator unit;
they are not indebted and thus need not provide security in the form of their assets. They can invest financial means,
which would otherwise have to be invested into installation of the turbine generator unit, into other projects.
9. REALIZATION OF ALL PHASES OF AN INVESTMENT PROJECT
We use our experiences and ideas for our clients' benefit. We offer an overall and complete service, so that you have
no interface problems. Our expert employees are also at your disposal to produce engineering services for individual
project phases.
Our services in engineering cover all phases of a plant. In both basic and detail engineering, we are able to offer the
following services: