2. CONTROLLINO
CONTROLLINO is an industry-grade PLC with 100% Arduino
compatibility. It can be used for almost any controlling and
automation purpose.
عن عبارة كونترولينوPLC توافق مع الصناعة فئة من100أردوينو مع ٪.من غرض ألي استخدامه يمكن
اًبتقري واألتمتة التحكم عناصر.
CONTROLLINO can be described in one sentence: it’s like an
industrialized Arduino. It combines the flexibility and open-source
nature of the Arduino ecosystem with the safety and reliability of
industrial grade PLCs.
وصف يمكنCONTROLLINO واحدة جملة في:يشبه Arduino الصناعي.المرونة بين يجمع فهو
لنظام المفتوح المصدر وطبيعةArduino وموثوقية سالمة مع البيئيPLCs الصناعية الدرجة من.
3. CONTROLLINO (CONT..)
With the simplicity and flexibility of the Arduino ecosystem, you can
drastically improve your project time-to-market.
نظام ومرونة بساطة خالل منArduinoالسوق في كبير بشكل مشروعك وقت تحسين يمكنك ، البيئي.
All this without sacrificing reliability and industry-ready performance.
للصناعة الجاهز واألداء بالموثوقية التضحية دون هذا كل.
Up to 61 I/O channels and relays, ranging from 5V to 250V at up to 16A.
allow you to use CONTROLLINO for an almost limitless range of automation
and control applications.
إلى يصل ما61إدخال ومرحل قناة/من تتراوح ، إخراج5إلى فولت250حتى فولت16أمبير.باستخدام لك تسمح
CONTROLLINOوالتحكم األتمتة تطبيقات من اًبتقري محدود غير لنطاق.
4. CONTROLLINO (CONT..)
they designed CONTROLLINO with highest industry & electronic safety
standards in mind. You can safely and reliably apply our module into
a production environment.
صمموا لقدCONTROLLINOاإللكترونية والسالمة الصناعة معايير أعلى مراعاة مع.تطبيق يمكنك
اإلنتاج بيئة في وموثوقية بأمان وحدتنا.
8. INPUTS
CONTROLLINO comes with up to 21 digital input channels
with ESD protection and other safety mechanisms.
يأتيCONTROLLINOإلى يصل ما مع21مع رقمية إدخال قناةESDالسالمة وآليات
األخرى.
ESD protection device protects a circuit from an Electrostatic
discharge
ESDالكهروستاتيكي التفريغ من الدائرة يحمي حماية جهاز
9. OUTPUTS
24 digital outputs (12x High Side Switch, 12x Half Bridge, rated
at 2A @ 12 or 24V) are available too.
10. INTERFACES
Interface the CONTROLLINO via industry-standard
interfaces like Serial (UART), RS485, I²C or SPI.
CONNECTIVITY
Communicate with your CONTROLLINO over USB or
through your network via Ethernet connector.
11. SOFTWARE
You can program CONTROLLINO with the standard Arduino IDE, as
well as with many other software solutions like Matlab, Atmel Studio
and more. If the software is compatible with traditional Arduino
boards, you can use it for CONTROLLINO too.
1. Arduino IDE
The open-source Arduino Software
(IDE) is the most used IDE for
Arduino and makes it easy to write
code and upload it to the
CONTROLLINO. It runs on Windows,
Mac OS X, and Linux. The
environment is written in Java and
based on Processing and other
open-source software. Make sure
you install the libraries first as stated
in the instruction manual. You can
find more information in the
12. SOFTWARE
2. Visuino
If you are a hardware developer and
don’t have much time to become an
expert in software development then
you can let Visuino become your
personal software expert.
Visuino has taken the effort out of
coding and created a drag and drop
programming environment where
everything is linked together by a
series of diagrams and pins.
Visualize the design of your code
and deploy!
13. SOFTWARE
3. Atmel Studio
Atmel Studio (before version 6: „AVR
Studio“) is a free IDE for directly
programming AVR Microcontrollers,
including an editor, debugger and
tools for writing directly to
microcontrollers.
14. SOFTWARE
4. logi.CAD
logi.CAD 3 is the engineering
software for creating controller
applications for industrial
automation. Systems of all kinds can
be programmed in accordance with
the industry norm IEC 61131-3, from
the microcontroller to various OEM
platforms and multi-core industrial
PCs.
18. CONTROLLINO MINI
The MINI is the smallest child in our
CONTROLLINO family. But no worries – it’s
still a big boy when it comes to the number
of inputs and outputs (8 each). The
incredible size to I/O ratio makes the MINI
one of the most compact and versatile PLCs
on the market.
Features MINI
5V Pin Headers Yes
Analog/Digital
Inputs
6 (2x only Analog)
Only Digital Inputs 2
Analog 0-10V
Inputs
no
Interrupt Inputs 2
Digital 2A Outputs 8 (3 PWM)
Analog 0-10V
Outputs
no
Relay Outputs 6 (parallel to Digital
Outputs)
Serial TTL Interface 1
I²C Interface 1
SPI Interface 1
RS485 Interface no
RTC 1
19. CONTROLLINO MAXI
The MAXI is the bestselling
model in our CONTROLLINO
range. It is the perfect
compromise between compact
size and big input and output
number. The core competence
is its flexibility.
Features MAXI
5V Pin Headers Yes
Analog/Digital Inputs 10
Only Digital Inputs 2
Analog 0-10V Inputs no
Interrupt Inputs 2
Digital 2A Outputs 12 (all PWM)
Analog 0-10V Outputs no
Relay Outputs 10
Serial TTL Interface 2
I²C Interface 1
SPI Interface 1
RS485 Interface 1
RTC 1
Ethernet Interface 1
Stepper Driver Output no
20. CONTROLLINO MEGA
The MEGA is the giant in our CONTROLLINO
range. If you are doing big and complex
projects, the Controllino MEGA is the perfect
fit. With its countless input and output
channels and high maximum current of 30A,
you can handle any automation and
controlling project with ease.
Features MEGA
5V Pin Headers Yes
Analog/Digital
Inputs
16
Only Digital Inputs 5
Analog 0-10V Inputs no
Interrupt Inputs 2
Digital 2A Outputs 24 (15 PWM)
Analog 0-10V
Outputs
no
Relay Outputs 16
Serial TTL Interface 2
I²C Interface 1
SPI Interface 1
RS485 Interface 1
RTC 1
Ethernet Interface 1
22. RIDING STABLE LIGHT CONTROL
Used the Controllino mini as a light control in a riding stable Consists
from:
1. Three PIR motion detectors (لالجسام )متحسس
2. One light sensor that sense the light level in the stable
3. Small LCD
4. Easy menu system there you can change max and min level of the
light
ESD protection device protects a circuit from an Electrostatic discharge (ESD), in order to prevent a malfunction or breakdown of an electronic device
Have used the Controllino mini as a light control in a riding stable for some years now. Consists of three PIR motion detectors and one light sensor that sense the light level in the stable. There is a little LCD and a easy menu system there you can change max and min level of the light. Wanted light level when there is movement in the stable. And timedelay when no movement is sensed. There is quite a lot of natural light in the stable so then it is daylight outside the system lower the power of the spotlights to save power and lifetime.