May 2016 Newsletter - Featured this month - IQ/IP programmable incremental encoders, customization and flexibility. Compact for narrow spaces, robust for harsh environments, high resolution for demanding applications, magnetic for tricky installations, optical for the greatest accuracy, with hollow or solid shaft, with cable or connector output, with resolution programmable up to 65,536 PPR: the range of programmable incremental encoders from Lika Electronic provides a myriad of possibilities to exactly meet your own requirements. IFS-10, SIL3/PLe functional safety! IFS-10 safety controller family from Lika Electronic is designed for safe monitoring of speed, standstill and direction of motion of incremental encoders and sensors both “safe” and “non safe” to be integrated into systems that require up to SIL3/PLe Functional Safety Level.
This document provides a cheat sheet of industrial control system (ICS) and SCADA products along with relevant Google dorks and network information to identify them. It lists common ICS vendors like Siemens, Allen-Bradley, Schneider Electric, General Electric and their products along with identifiers like default credentials, open ports, and SNMP strings that can be used for discovery and identification on Google, Shodan, or a network.
Featured this month: IFS-10, SIL3/PLe functional safety. IFS-10 safety controller family from Lika Electronic is designed for safe monitoring of speed, standstill and direction of motion of incremental encoders and sensors both “safe” and “non safe” to be integrated into systems that require up to SIL3/PLe Functional Safety Level. Also for SSI absolute encoders available soon.
OV7670 Camera interfacing-with-arduino-microcontrollerSomnath Sharma
This document discusses interfacing an OV7670 camera module with an Arduino microcontroller. It begins with an introduction and objectives. It then describes the hardware used, including specifications of the camera module and Arduino. It provides circuit diagrams and explains the serial camera control bus protocol. The document outlines the program flow, including initializing the camera, receiving image bytes in rows, and converting the pixel data to an image file. It also discusses handling multiple scans and converting images to PDF. Finally, it concludes the camera can provide a low-cost, configurable image acquisition solution for applications like security and time-lapse photography.
Sales Kits for NEXCOM Automation ControllerEric Lo
This document provides an overview of NEXCOM's IoT automation and control solutions for Industry 4.0. It discusses NEXCOM's converged IoT automation platform which seamlessly connects OT, CT, IT and IoT systems to the cloud. It also describes NEXCOM's automation controllers, including their PLC, motion control, networking and security capabilities. The controllers provide a unified architecture for industrial automation through open standards-based, high performance hardware and software.
In this presentation, Interfacing Bluetooth(HC-05) with Arduino is explained with some AT commands to configure and initialize the Bluetooth module(HC-05).
Code for Arduino:
#include <SoftwareSerial.h>
SoftwareSerial mySerial(10, 11); // RX, TX
void setup()
{
Serial.begin(9600);
pinMode(9,OUTPUT); digitalWrite(9,HIGH);
Serial.println("Enter AT commands:");
mySerial.begin(38400);
}
void loop()
{
if (mySerial.available())
Serial.write(mySerial.read());
if (Serial.available())
mySerial.write(Serial.read());
}
This document describes a smart assistance trolley system that uses RFID and Zigbee technology to automatically calculate shopping bills. The trolley contains a microcontroller, LCD display, RFID reader, and remove button. When products are placed in the trolley, the RFID reader scans their tags and displays the item and cost on the LCD. A remove button decreases the item count and cost if an item is taken out. The microcontroller transmits data to a PC using Zigbee to continuously update the bill total. This system aims to make shopping more efficient by automatically tracking selected products and their costs.
May 2016 Newsletter - Featured this month - IQ/IP programmable incremental encoders, customization and flexibility. Compact for narrow spaces, robust for harsh environments, high resolution for demanding applications, magnetic for tricky installations, optical for the greatest accuracy, with hollow or solid shaft, with cable or connector output, with resolution programmable up to 65,536 PPR: the range of programmable incremental encoders from Lika Electronic provides a myriad of possibilities to exactly meet your own requirements. IFS-10, SIL3/PLe functional safety! IFS-10 safety controller family from Lika Electronic is designed for safe monitoring of speed, standstill and direction of motion of incremental encoders and sensors both “safe” and “non safe” to be integrated into systems that require up to SIL3/PLe Functional Safety Level.
This document provides a cheat sheet of industrial control system (ICS) and SCADA products along with relevant Google dorks and network information to identify them. It lists common ICS vendors like Siemens, Allen-Bradley, Schneider Electric, General Electric and their products along with identifiers like default credentials, open ports, and SNMP strings that can be used for discovery and identification on Google, Shodan, or a network.
Featured this month: IFS-10, SIL3/PLe functional safety. IFS-10 safety controller family from Lika Electronic is designed for safe monitoring of speed, standstill and direction of motion of incremental encoders and sensors both “safe” and “non safe” to be integrated into systems that require up to SIL3/PLe Functional Safety Level. Also for SSI absolute encoders available soon.
OV7670 Camera interfacing-with-arduino-microcontrollerSomnath Sharma
This document discusses interfacing an OV7670 camera module with an Arduino microcontroller. It begins with an introduction and objectives. It then describes the hardware used, including specifications of the camera module and Arduino. It provides circuit diagrams and explains the serial camera control bus protocol. The document outlines the program flow, including initializing the camera, receiving image bytes in rows, and converting the pixel data to an image file. It also discusses handling multiple scans and converting images to PDF. Finally, it concludes the camera can provide a low-cost, configurable image acquisition solution for applications like security and time-lapse photography.
Sales Kits for NEXCOM Automation ControllerEric Lo
This document provides an overview of NEXCOM's IoT automation and control solutions for Industry 4.0. It discusses NEXCOM's converged IoT automation platform which seamlessly connects OT, CT, IT and IoT systems to the cloud. It also describes NEXCOM's automation controllers, including their PLC, motion control, networking and security capabilities. The controllers provide a unified architecture for industrial automation through open standards-based, high performance hardware and software.
In this presentation, Interfacing Bluetooth(HC-05) with Arduino is explained with some AT commands to configure and initialize the Bluetooth module(HC-05).
Code for Arduino:
#include <SoftwareSerial.h>
SoftwareSerial mySerial(10, 11); // RX, TX
void setup()
{
Serial.begin(9600);
pinMode(9,OUTPUT); digitalWrite(9,HIGH);
Serial.println("Enter AT commands:");
mySerial.begin(38400);
}
void loop()
{
if (mySerial.available())
Serial.write(mySerial.read());
if (Serial.available())
mySerial.write(Serial.read());
}
This document describes a smart assistance trolley system that uses RFID and Zigbee technology to automatically calculate shopping bills. The trolley contains a microcontroller, LCD display, RFID reader, and remove button. When products are placed in the trolley, the RFID reader scans their tags and displays the item and cost on the LCD. A remove button decreases the item count and cost if an item is taken out. The microcontroller transmits data to a PC using Zigbee to continuously update the bill total. This system aims to make shopping more efficient by automatically tracking selected products and their costs.
IRJET- Centralised Status alert system for industrial machinesIRJET Journal
This document describes a centralized status alert system for monitoring industrial machines. The system uses a master unit and multiple slave units to monitor machines. Each slave unit is installed on a machine and monitors parameters like oil level, temperature, and material levels. If an issue is detected, the slave unit sends an alert to the master unit. The master unit then sends an SMS notification to the control department. The slave units communicate wirelessly with the master unit using NRF24L01 transceivers. The master unit uses GSM to send SMS alerts. This allows real-time monitoring of machines and alerts operators to issues to prevent downtime or damage.
This document describes a GSM-based industrial security system that uses sensors and a microcontroller. Sensors like IR, touch, LDR, and temperature are connected to a microcontroller to detect intruders or fire. If triggered, the sensors will send alerts through GSM modem to notify users. The system provides 24/7 remote monitoring and flexible security at low cost. It can benefit industries, museums, colleges, and offices by improving security.
IO-Link is a point-to-point communication protocol that connects field devices like sensors and actuators directly to controllers. It uses standard 3-core cables to transmit power and data over short distances. IO-Link devices connect to an IO-Link master that acts as an interface between the field devices and higher-level networks. This allows for extensive device diagnostics and parameterization of devices from the controller without additional hardware costs. IO-Link simplifies wiring, installation and maintenance of automated systems.
This document provides details about the design and implementation of a wireless gas leakage detection robot. It begins with an introduction describing the dangers of gas leaks and motivates the need for a gas leakage detector. It then provides an overview of the key components used in the robot, including an Arduino Uno microcontroller, RF transmitter/receiver modules, encoder/decoder ICs, DC motors, and an MQ-2 gas sensor. The document presents circuit diagrams for the transmitting and receiving sections and describes the motor driver circuit. It concludes with potential applications of the robot and a high-level overview of its operation.
The document describes an electronic code lock device that uses a microcontroller to allow access with a password. It contains a keypad, LCD display, and P89V51 microcontroller. The device accepts a 4-digit password and unlocks if the correct code is entered. It can be adapted for access control of electronic devices. The microcontroller contains memory and ports to interface with the keypad, display, and locking mechanism.
2011 WPC IAG IoT Booth training material 20111020 Eric LoEric Lo
The document provides an overview of IAG IoT booth training material. It includes:
1. A layout of the IoT booth displaying different smart city applications like disaster monitoring, water treatment control, factory monitoring, etc. along with the products demonstrated for each.
2. Detailed sections for several applications including disaster monitoring, water treatment control, factory monitoring, greenhouse monitoring, traffic information system, and cold chain logistics.
3. Information on Advantech's wireless sensor network solutions and ADAM-2000 product offerings for IoT applications.
Wireless AI based industrial security robotVarun B P
This document provides an overview of an intelligent robot project that detects dangerous gas/smoke. It includes 9 chapters that describe: the existing system and proposed project (Chapter 1); a literature review (Chapter 2); the overall project description and block diagram (Chapter 3); the software and hardware components including a microcontroller, sensors, camera and other devices (Chapter 4); how the system will be implemented (Chapter 5); the advantages and disadvantages (Chapter 6); potential applications (Chapter 7); and conclusions (Chapter 8). An abstract is also provided.
Tracking police man using rf proximity cardAlbert Jose
Security is the important cause in the modern world. Now a day so many schemes have
announced by the banks which very attractive and the people are saving money in banks. At this
point protecting the banks is the main duty of police. Hence police are appointed securities to the
banks and make them to patrol during nights. . They have to go to every banks and streets and
sign the books kept in their places .But some police people forgot their duty and will sleep in a
vacant place and in the morning they get up and in a hurry go to these banks and put a fake time
and date and the signature .To avoid this and to provide more security our proposed system is
giving solution for tracking police man using RF proximity card. A RF proximity card reader with a
microcontroller will be designed and will be placed in every bank. During the patrol time, when a
police man swipe the card it will read the card number and will store it with date and time. The
data can be retrieved by connecting the machine to PC and giving appropriate commands.
Tracking police man using RF proximity card embedded system project explains about
new method for bank officials for checking their security of the bank by implementing accurate
method to control police officials. In present scenario banks are playing important role in providing
security for people for saving their money, gold..Etc. So banks are taking serious steps to
maintain security like hiring police officials at night time for patrolling banks, but there are chances
in irregularity of police officials so this method will provide card system for every police official
who should scratch his card. Data and time is stored inside system which can connect to
computer and analyze details of his attendance
The document summarizes the InBio Pro Series biometric access control panels. The panels use embedded fingerprint verification and can be managed over TCP/IP networks. They are compatible with ZKBioSecurity software and FR1300 readers to provide fingerprint, card, and password authentication. The panels come in 1-door, 2-door, and 4-door models and support features like anti-passback, first-card opening, and auxiliary input/output linkages.
This document outlines a project to build an infrared remote controlled robot using an AT89C51 microcontroller. The robot will receive infrared signals from a standard TV remote control up to 10 meters away. The microcontroller will decode the signals and control motors to move the robot in different directions. The microcontroller will interface with infrared sensors, motor drivers, and DC motors. Software will be written in assembly language and compiled using a cross compiler. The robot will allow controlling robot movement with a regular remote control.
The document describes designing a magnetic door lock system using an Arduino microcontroller. The system employs a magnetic lock, keypad, and Arduino board. When the correct code is entered via the keypad, a green LED will light and a small solenoid will engage, locking the door via magnetism. The Arduino senses the keypad input and controls the solenoid and LED output. The document provides details on the components, including describing the ATmega168 microcontroller on the Arduino board.
How to design a Passive Infrared (PIR) Open Source ProjectIonela
This article details the hardware and software required for a fully functional passive infrared (PIR) sensor with an associated remote control unit. The remote control unit adjusts key algorithm detection parameters which are stored in the MC68HC908JK1/3 FLASH memory area.
RFID based Access Control using 8051 Micro ControllerCircuitsToday
This document describes an RFID based access control system using an 8051 microcontroller. The system uses an RFID reader and tags to identify authorized users and grant access by controlling a relay if their RFID code matches stored codes. An LCD displays status messages. The system provides security for organizations by only allowing access to people with valid RFID tags. It can be enhanced with GSM to notify of access attempts and expanded for attendance tracking.
The Project is about anti-theft & automation. It also provides protection against gas leakage by notification through sms and internet. Ability to control electrical equipments via internet
PHYTEC Indo Swiss Training Center Embedded Systems IntroductionVasu Dev
Indo Swiss Training Center Workshop
Introduction to Embedded Systems & Internet of Things, ARM Processor & Risc-V Processor, AI/ML Applications using System On Module & Single Board Computer.
Applications in various domains like Industrial Automation, Medical & Healthcare, Energy Automation, Transportation, Aerospace, Railways, Retail Automation.
This document describes a GSM based industrial security system that uses sensors and a microcontroller. It uses an IR sensor, touch sensor, LDR sensor and temperature sensor to detect intruders and fires. The ATmega48/88 microcontroller is programmed to sense unauthorized persons and fires. If an intruder is detected or a high temperature is measured, a message is sent via GSM modem to alert concerned mobile numbers. The system provides flexible and effective security for industries, museums, colleges and offices.
The solution selling kits of PC-based Automation_20160404_Eric LoEric Lo
This document discusses PC-based automation solutions for driving Industry 4.0. It outlines key elements of Industry 4.0 like smarter machinery, digital factories, and connected enterprises. It then describes the architecture and components of smarter machine systems using PC-based controllers like IPPC and NIFE series. These support real-time EtherCAT communication, standard IEC 61131-3 programming, and seamless integration between industrial automation and information technology. The document promotes these PC-based motion controllers as providing high performance, multi-axis control, and open connectivity required for digital transformation in industry.
The RS30 series is a rugged touch mobile computer manufactured by CipherLab to meet the needs of mobile workers. It has a touch-centric interface like a smartphone alongside rugged features to withstand harsh environments. The RS30 offers reliable performance throughout a full shift without concerns over battery life. It provides an enterprise-focused full-function touch device.
2012 Moxa Brazil Channel Partner's Workshop_Industrial Ethernet Solution_0424...Eric Lo
The document provides an agenda for Moxa Brazil's 2012 Channel Partner's Workshop, to be held on April 25-26. The agenda includes topics such as Moxa's Industrial Ethernet Solution, vertical market strategies and case studies in power automation and transportation, and collaboration models for the power automation market. Presentations will cover Moxa's solutions for areas like remote I/O, industrial computing, wireless connectivity, IP surveillance, and solutions for the power and transportation industries.
DIGITAL LOGIC DESIGN (1) PROJECT REPORT.docxRafayNaveed4
The document describes a home automation system project that allows controlling home appliances via Bluetooth from a smartphone. The key components are an Arduino Uno microcontroller, Bluetooth module, 4-channel relay board. The system allows remotely turning appliances on/off like lights and fans. It discusses the working, including an Android app transmitting commands via Bluetooth to the Arduino which controls the relays. Benefits are security, energy efficiency, and cost savings. The budget is 5000 RS and code is included to interface the components.
This document provides an overview of a fire alarm system manufacturer's product line. It describes the capabilities of the manufacturer's high-end addressable fire panel, including its 128-loop capability and ability to integrate conventional systems. It also outlines the manufacturer's integration levels from simple conventional systems to complex addressable systems controlled from remote locations. Finally, it summarizes the manufacturer's portfolio of detectors, modules, sounders and other field devices.
IRJET- Centralised Status alert system for industrial machinesIRJET Journal
This document describes a centralized status alert system for monitoring industrial machines. The system uses a master unit and multiple slave units to monitor machines. Each slave unit is installed on a machine and monitors parameters like oil level, temperature, and material levels. If an issue is detected, the slave unit sends an alert to the master unit. The master unit then sends an SMS notification to the control department. The slave units communicate wirelessly with the master unit using NRF24L01 transceivers. The master unit uses GSM to send SMS alerts. This allows real-time monitoring of machines and alerts operators to issues to prevent downtime or damage.
This document describes a GSM-based industrial security system that uses sensors and a microcontroller. Sensors like IR, touch, LDR, and temperature are connected to a microcontroller to detect intruders or fire. If triggered, the sensors will send alerts through GSM modem to notify users. The system provides 24/7 remote monitoring and flexible security at low cost. It can benefit industries, museums, colleges, and offices by improving security.
IO-Link is a point-to-point communication protocol that connects field devices like sensors and actuators directly to controllers. It uses standard 3-core cables to transmit power and data over short distances. IO-Link devices connect to an IO-Link master that acts as an interface between the field devices and higher-level networks. This allows for extensive device diagnostics and parameterization of devices from the controller without additional hardware costs. IO-Link simplifies wiring, installation and maintenance of automated systems.
This document provides details about the design and implementation of a wireless gas leakage detection robot. It begins with an introduction describing the dangers of gas leaks and motivates the need for a gas leakage detector. It then provides an overview of the key components used in the robot, including an Arduino Uno microcontroller, RF transmitter/receiver modules, encoder/decoder ICs, DC motors, and an MQ-2 gas sensor. The document presents circuit diagrams for the transmitting and receiving sections and describes the motor driver circuit. It concludes with potential applications of the robot and a high-level overview of its operation.
The document describes an electronic code lock device that uses a microcontroller to allow access with a password. It contains a keypad, LCD display, and P89V51 microcontroller. The device accepts a 4-digit password and unlocks if the correct code is entered. It can be adapted for access control of electronic devices. The microcontroller contains memory and ports to interface with the keypad, display, and locking mechanism.
2011 WPC IAG IoT Booth training material 20111020 Eric LoEric Lo
The document provides an overview of IAG IoT booth training material. It includes:
1. A layout of the IoT booth displaying different smart city applications like disaster monitoring, water treatment control, factory monitoring, etc. along with the products demonstrated for each.
2. Detailed sections for several applications including disaster monitoring, water treatment control, factory monitoring, greenhouse monitoring, traffic information system, and cold chain logistics.
3. Information on Advantech's wireless sensor network solutions and ADAM-2000 product offerings for IoT applications.
Wireless AI based industrial security robotVarun B P
This document provides an overview of an intelligent robot project that detects dangerous gas/smoke. It includes 9 chapters that describe: the existing system and proposed project (Chapter 1); a literature review (Chapter 2); the overall project description and block diagram (Chapter 3); the software and hardware components including a microcontroller, sensors, camera and other devices (Chapter 4); how the system will be implemented (Chapter 5); the advantages and disadvantages (Chapter 6); potential applications (Chapter 7); and conclusions (Chapter 8). An abstract is also provided.
Tracking police man using rf proximity cardAlbert Jose
Security is the important cause in the modern world. Now a day so many schemes have
announced by the banks which very attractive and the people are saving money in banks. At this
point protecting the banks is the main duty of police. Hence police are appointed securities to the
banks and make them to patrol during nights. . They have to go to every banks and streets and
sign the books kept in their places .But some police people forgot their duty and will sleep in a
vacant place and in the morning they get up and in a hurry go to these banks and put a fake time
and date and the signature .To avoid this and to provide more security our proposed system is
giving solution for tracking police man using RF proximity card. A RF proximity card reader with a
microcontroller will be designed and will be placed in every bank. During the patrol time, when a
police man swipe the card it will read the card number and will store it with date and time. The
data can be retrieved by connecting the machine to PC and giving appropriate commands.
Tracking police man using RF proximity card embedded system project explains about
new method for bank officials for checking their security of the bank by implementing accurate
method to control police officials. In present scenario banks are playing important role in providing
security for people for saving their money, gold..Etc. So banks are taking serious steps to
maintain security like hiring police officials at night time for patrolling banks, but there are chances
in irregularity of police officials so this method will provide card system for every police official
who should scratch his card. Data and time is stored inside system which can connect to
computer and analyze details of his attendance
The document summarizes the InBio Pro Series biometric access control panels. The panels use embedded fingerprint verification and can be managed over TCP/IP networks. They are compatible with ZKBioSecurity software and FR1300 readers to provide fingerprint, card, and password authentication. The panels come in 1-door, 2-door, and 4-door models and support features like anti-passback, first-card opening, and auxiliary input/output linkages.
This document outlines a project to build an infrared remote controlled robot using an AT89C51 microcontroller. The robot will receive infrared signals from a standard TV remote control up to 10 meters away. The microcontroller will decode the signals and control motors to move the robot in different directions. The microcontroller will interface with infrared sensors, motor drivers, and DC motors. Software will be written in assembly language and compiled using a cross compiler. The robot will allow controlling robot movement with a regular remote control.
The document describes designing a magnetic door lock system using an Arduino microcontroller. The system employs a magnetic lock, keypad, and Arduino board. When the correct code is entered via the keypad, a green LED will light and a small solenoid will engage, locking the door via magnetism. The Arduino senses the keypad input and controls the solenoid and LED output. The document provides details on the components, including describing the ATmega168 microcontroller on the Arduino board.
How to design a Passive Infrared (PIR) Open Source ProjectIonela
This article details the hardware and software required for a fully functional passive infrared (PIR) sensor with an associated remote control unit. The remote control unit adjusts key algorithm detection parameters which are stored in the MC68HC908JK1/3 FLASH memory area.
RFID based Access Control using 8051 Micro ControllerCircuitsToday
This document describes an RFID based access control system using an 8051 microcontroller. The system uses an RFID reader and tags to identify authorized users and grant access by controlling a relay if their RFID code matches stored codes. An LCD displays status messages. The system provides security for organizations by only allowing access to people with valid RFID tags. It can be enhanced with GSM to notify of access attempts and expanded for attendance tracking.
The Project is about anti-theft & automation. It also provides protection against gas leakage by notification through sms and internet. Ability to control electrical equipments via internet
PHYTEC Indo Swiss Training Center Embedded Systems IntroductionVasu Dev
Indo Swiss Training Center Workshop
Introduction to Embedded Systems & Internet of Things, ARM Processor & Risc-V Processor, AI/ML Applications using System On Module & Single Board Computer.
Applications in various domains like Industrial Automation, Medical & Healthcare, Energy Automation, Transportation, Aerospace, Railways, Retail Automation.
This document describes a GSM based industrial security system that uses sensors and a microcontroller. It uses an IR sensor, touch sensor, LDR sensor and temperature sensor to detect intruders and fires. The ATmega48/88 microcontroller is programmed to sense unauthorized persons and fires. If an intruder is detected or a high temperature is measured, a message is sent via GSM modem to alert concerned mobile numbers. The system provides flexible and effective security for industries, museums, colleges and offices.
The solution selling kits of PC-based Automation_20160404_Eric LoEric Lo
This document discusses PC-based automation solutions for driving Industry 4.0. It outlines key elements of Industry 4.0 like smarter machinery, digital factories, and connected enterprises. It then describes the architecture and components of smarter machine systems using PC-based controllers like IPPC and NIFE series. These support real-time EtherCAT communication, standard IEC 61131-3 programming, and seamless integration between industrial automation and information technology. The document promotes these PC-based motion controllers as providing high performance, multi-axis control, and open connectivity required for digital transformation in industry.
The RS30 series is a rugged touch mobile computer manufactured by CipherLab to meet the needs of mobile workers. It has a touch-centric interface like a smartphone alongside rugged features to withstand harsh environments. The RS30 offers reliable performance throughout a full shift without concerns over battery life. It provides an enterprise-focused full-function touch device.
2012 Moxa Brazil Channel Partner's Workshop_Industrial Ethernet Solution_0424...Eric Lo
The document provides an agenda for Moxa Brazil's 2012 Channel Partner's Workshop, to be held on April 25-26. The agenda includes topics such as Moxa's Industrial Ethernet Solution, vertical market strategies and case studies in power automation and transportation, and collaboration models for the power automation market. Presentations will cover Moxa's solutions for areas like remote I/O, industrial computing, wireless connectivity, IP surveillance, and solutions for the power and transportation industries.
DIGITAL LOGIC DESIGN (1) PROJECT REPORT.docxRafayNaveed4
The document describes a home automation system project that allows controlling home appliances via Bluetooth from a smartphone. The key components are an Arduino Uno microcontroller, Bluetooth module, 4-channel relay board. The system allows remotely turning appliances on/off like lights and fans. It discusses the working, including an Android app transmitting commands via Bluetooth to the Arduino which controls the relays. Benefits are security, energy efficiency, and cost savings. The budget is 5000 RS and code is included to interface the components.
This document provides an overview of a fire alarm system manufacturer's product line. It describes the capabilities of the manufacturer's high-end addressable fire panel, including its 128-loop capability and ability to integrate conventional systems. It also outlines the manufacturer's integration levels from simple conventional systems to complex addressable systems controlled from remote locations. Finally, it summarizes the manufacturer's portfolio of detectors, modules, sounders and other field devices.
Transcend Automation is the Authorized Business partners for Advantech Co.Ltd. in India. We Market / Promote / Integrate their products for customers in India.
Choosing the right PLC can be overwhelming for most people. If you’ve been tasked with determining what control solution is needed for your next application, a control system integrator (CSI) can be an excellent resource. A CSI should be technology agnostic. Their priority should be to understand your specific technical and commercial requirements.
IBM introduces the first neurosynaptische computer chip mimicking the human brain with a million programmable neurons and 256 million programmable synapses. The chip consumes only 70mW, much less than a modern microprocessor. The chip could enable major advances in science, technology, business, government and society. Brainchild's new line of Smart paperless linerecorders now include touchscreens, MODBUS TCP/IP ports, USB ports, and an SD slot. Models range from 4.3 to 12.1 inches and can measure up to 48 analog channels. The recorders include standard features like timers and internet clock synchronization for logging.
Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online.
Industrial Applications of Arduino using Ladder LogicRobocraze
This document provides an overview of using Arduino boards in industrial applications. It discusses the Arduino Pro series of boards including the Portenta H7, Edge Control, Nicla Sense ME, Nano 33 BLE, and MKR family. It then introduces ladder logic programming, the basics of how it works, and demonstrates it using an online IDE called IECuino. Circuit diagrams and programming examples for turning on an LED using buttons are provided to illustrate ladder logic programming with Arduino. The document concludes with information on asking questions.
Siemens' SIMATIC S7-200 SMART PLC offers an affordable and flexible automation solution for developing markets. It provides a range of CPU modules with integrated I/O and communication ports. Additional I/O and communication can be added via cost-effective signal boards. The PLC uses a high-speed processor and user-friendly software to provide powerful motion control, networking, and programming capabilities despite its low cost. It can be integrated with other Siemens products to create complete automation solutions for applications like packaging machines.
The new Modicon M580 is the first ePAC with Ethernet built right into its core. M580 is the controller of choice for Schneider Electric’s collaborative and integrated automation architecture, PlantStruxure.
The document provides information about Schneider Electric, a leading manufacturer of automation and control solutions. It discusses Schneider Electric's history, products, and solutions. Key points include that Schneider Electric was founded in 1836 and is a pioneer in programmable logic controllers (PLCs). It offers a wide range of PLCs, drives, software, and other automation products. The document provides details on several of Schneider Electric's PLC and drive product lines.
Developing an avr microcontroller systemnugnugmacmac
This document provides an introduction to microcontrollers and AVR microcontrollers. It discusses what microprocessors and microcontrollers are, how they are used in various electronic devices. It then focuses on the AVR architecture, its features like flash memory, SRAM, EEPROM. It demonstrates how to interface an AVR chip with an LCD display and program it to display "Hello World". It describes the tools and steps needed to program the AVR, including using AVR Studio, GCC compiler and PonyProg programmer.
The one-day workshop covers embedded system design using simulation tools. It discusses embedded systems, microcontrollers, microprocessors and Arduino. The technical specifications of Arduino and how to interface it with sensors like LCD, temperature sensor, ultrasonic sensor, IR sensor and soil moisture sensor are explained. The document emphasizes the need for simulation to safely and efficiently solve real-world problems. It also introduces Tinkercad as a free simulation tool to design interfaces between Arduino and various sensors. The code examples shared explain how to interface different sensors with Arduino and read their values.
Choosing the right PLC can be overwhelming for most people. If you’ve been tasked with determining what control solution is needed for your next application, a control system integrator (CSI) can be an excellent resource. A CSI should be technology agnostic. Their priority should be to understand your specific technical and commercial requirements.
This document describes a touch screen and Zigbee based control system for apartments using an embedded system. The system uses a microcontroller, touch screen, Zigbee modules, and other components to allow users to control home appliances in their apartment wirelessly via the touch screen or voice commands. The microcontroller interfaces with the touch screen, Zigbee modules, and other devices. It receives input from the touch screen or other inputs and sends wireless signals via Zigbee to control appliances like lights and fans. The system aims to provide a compact, user-friendly, and low-cost way to remotely control home appliances within an apartment.
Since our commencement in the year 1984, we, “Electro Engineering Enterprises”, are an ISO 9001:2008 certified firm, which is one of the leading manufacturers, suppliers and exporters of Data Acquisition Systems, Industrial Communication, Networking & Power system Products. Offered products are Industrial Computer Chassis, Embedded Box Computers, Programmable Automation Controller, Industrial Ethernet Switches, Wireless Communication System, CCTV Cameras, Digital Signage System, DC to DC Converter and Industrial Media Converter, to name a few. Also, we offer RS485/Ethernet Based DAQ Modules, USB Modules (Data Acquisition Systems), PCI Cards, Data Acquisition Module using premium grade components. The Power Supplies in power electronics division are sourced from reputed names such as Meanwell Taiwan, Digitronics and Spectron.
The document provides information on access control products from a company, including networkable access control units, software solutions, proximity readers, Mifare readers, longer range proximity readers, vandal resistant readers, convertible reader/controllers, and VR Mifare readers. Technical specifications and features are listed for each product type. Services such as design consultancy, on-site commissioning, technical support, training, and remote support are also summarized.
This paper Presentation(ppt) is totally on Industrial Automation for seminar along with project ( PLC based water bottle filling system) which work on the principle of Industrial Automation .
The document describes Modicon M221 and M221 Book logic controllers for machine control. The M221 controllers offer best-in-class performance with embedded I/O, communication ports, and functions. They integrate with the EcoStruxure Machine architecture to enable smart, connected machines. Programming is done with the EcoStruxure Machine Expert - Basic software for simplified engineering. The controllers are available in different sizes with optional I/O expansion modules, cartridges, and remote displays to suit a variety of machine control applications.
Ranjith Kumar is seeking a position in industrial automation where he can learn and solve problems. He has experience programming PLCs and HMIs from Schneider and Allen-Bradley and skills in ladder logic, SCADA, networking protocols, and Microsoft Office. His current role involves designing and implementing automation systems for water treatment plants, parking ventilation, and solar air conditioning using PLCs, HMIs, sensors, and VFDs. Ranjith holds a B.Tech in electrical engineering and is proficient in Kannada, English, Hindi, and Telugu.
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
How to Manage Your Lost Opportunities in Odoo 17 CRMCeline George
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...RitikBhardwaj56
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Executive Directors Chat Leveraging AI for Diversity, Equity, and InclusionTechSoup
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
2. CONTROLLINO
CONTROLLINO is an industry-grade PLC with 100% Arduino
compatibility. It can be used for almost any controlling and
automation purpose.
عن عبارة كونترولينوPLC توافق مع الصناعة فئة من100أردوينو مع ٪.من غرض ألي استخدامه يمكن
اًبتقري واألتمتة التحكم عناصر.
CONTROLLINO can be described in one sentence: it’s like an
industrialized Arduino. It combines the flexibility and open-source
nature of the Arduino ecosystem with the safety and reliability of
industrial grade PLCs.
وصف يمكنCONTROLLINO واحدة جملة في:يشبه Arduino الصناعي.المرونة بين يجمع فهو
لنظام المفتوح المصدر وطبيعةArduino وموثوقية سالمة مع البيئيPLCs الصناعية الدرجة من.
3. CONTROLLINO (CONT..)
With the simplicity and flexibility of the Arduino ecosystem, you can
drastically improve your project time-to-market.
نظام ومرونة بساطة خالل منArduinoالسوق في كبير بشكل مشروعك وقت تحسين يمكنك ، البيئي.
All this without sacrificing reliability and industry-ready performance.
للصناعة الجاهز واألداء بالموثوقية التضحية دون هذا كل.
Up to 61 I/O channels and relays, ranging from 5V to 250V at up to 16A.
allow you to use CONTROLLINO for an almost limitless range of automation
and control applications.
إلى يصل ما61إدخال ومرحل قناة/من تتراوح ، إخراج5إلى فولت250حتى فولت16أمبير.باستخدام لك تسمح
CONTROLLINOوالتحكم األتمتة تطبيقات من اًبتقري محدود غير لنطاق.
4. CONTROLLINO (CONT..)
they designed CONTROLLINO with highest industry & electronic safety
standards in mind. You can safely and reliably apply our module into
a production environment.
صمموا لقدCONTROLLINOاإللكترونية والسالمة الصناعة معايير أعلى مراعاة مع.تطبيق يمكنك
اإلنتاج بيئة في وموثوقية بأمان وحدتنا.
8. INPUTS
CONTROLLINO comes with up to 21 digital input channels
with ESD protection and other safety mechanisms.
يأتيCONTROLLINOإلى يصل ما مع21مع رقمية إدخال قناةESDالسالمة وآليات
األخرى.
ESD protection device protects a circuit from an Electrostatic
discharge
ESDالكهروستاتيكي التفريغ من الدائرة يحمي حماية جهاز
9. OUTPUTS
24 digital outputs (12x High Side Switch, 12x Half Bridge, rated
at 2A @ 12 or 24V) are available too.
10. INTERFACES
Interface the CONTROLLINO via industry-standard
interfaces like Serial (UART), RS485, I²C or SPI.
CONNECTIVITY
Communicate with your CONTROLLINO over USB or
through your network via Ethernet connector.
11. SOFTWARE
You can program CONTROLLINO with the standard Arduino IDE, as
well as with many other software solutions like Matlab, Atmel Studio
and more. If the software is compatible with traditional Arduino
boards, you can use it for CONTROLLINO too.
1. Arduino IDE
The open-source Arduino Software
(IDE) is the most used IDE for
Arduino and makes it easy to write
code and upload it to the
CONTROLLINO. It runs on Windows,
Mac OS X, and Linux. The
environment is written in Java and
based on Processing and other
open-source software. Make sure
you install the libraries first as stated
in the instruction manual. You can
find more information in the
12. SOFTWARE
2. Visuino
If you are a hardware developer and
don’t have much time to become an
expert in software development then
you can let Visuino become your
personal software expert.
Visuino has taken the effort out of
coding and created a drag and drop
programming environment where
everything is linked together by a
series of diagrams and pins.
Visualize the design of your code
and deploy!
13. SOFTWARE
3. Atmel Studio
Atmel Studio (before version 6: „AVR
Studio“) is a free IDE for directly
programming AVR Microcontrollers,
including an editor, debugger and
tools for writing directly to
microcontrollers.
14. SOFTWARE
4. logi.CAD
logi.CAD 3 is the engineering
software for creating controller
applications for industrial
automation. Systems of all kinds can
be programmed in accordance with
the industry norm IEC 61131-3, from
the microcontroller to various OEM
platforms and multi-core industrial
PCs.
18. CONTROLLINO MINI
The MINI is the smallest child in our
CONTROLLINO family. But no worries – it’s
still a big boy when it comes to the number
of inputs and outputs (8 each). The
incredible size to I/O ratio makes the MINI
one of the most compact and versatile PLCs
on the market.
Features MINI
5V Pin Headers Yes
Analog/Digital
Inputs
6 (2x only Analog)
Only Digital Inputs 2
Analog 0-10V
Inputs
no
Interrupt Inputs 2
Digital 2A Outputs 8 (3 PWM)
Analog 0-10V
Outputs
no
Relay Outputs 6 (parallel to Digital
Outputs)
Serial TTL Interface 1
I²C Interface 1
SPI Interface 1
RS485 Interface no
RTC 1
19. CONTROLLINO MAXI
The MAXI is the bestselling
model in our CONTROLLINO
range. It is the perfect
compromise between compact
size and big input and output
number. The core competence
is its flexibility.
Features MAXI
5V Pin Headers Yes
Analog/Digital Inputs 10
Only Digital Inputs 2
Analog 0-10V Inputs no
Interrupt Inputs 2
Digital 2A Outputs 12 (all PWM)
Analog 0-10V Outputs no
Relay Outputs 10
Serial TTL Interface 2
I²C Interface 1
SPI Interface 1
RS485 Interface 1
RTC 1
Ethernet Interface 1
Stepper Driver Output no
20. CONTROLLINO MEGA
The MEGA is the giant in our CONTROLLINO
range. If you are doing big and complex
projects, the Controllino MEGA is the perfect
fit. With its countless input and output
channels and high maximum current of 30A,
you can handle any automation and
controlling project with ease.
Features MEGA
5V Pin Headers Yes
Analog/Digital
Inputs
16
Only Digital Inputs 5
Analog 0-10V Inputs no
Interrupt Inputs 2
Digital 2A Outputs 24 (15 PWM)
Analog 0-10V
Outputs
no
Relay Outputs 16
Serial TTL Interface 2
I²C Interface 1
SPI Interface 1
RS485 Interface 1
RTC 1
Ethernet Interface 1
22. RIDING STABLE LIGHT CONTROL
Used the Controllino mini as a light control in a riding stable Consists
from:
1. Three PIR motion detectors (لالجسام )متحسس
2. One light sensor that sense the light level in the stable
3. Small LCD
4. Easy menu system there you can change max and min level of the
light
ESD protection device protects a circuit from an Electrostatic discharge (ESD), in order to prevent a malfunction or breakdown of an electronic device
Have used the Controllino mini as a light control in a riding stable for some years now. Consists of three PIR motion detectors and one light sensor that sense the light level in the stable. There is a little LCD and a easy menu system there you can change max and min level of the light. Wanted light level when there is movement in the stable. And timedelay when no movement is sensed. There is quite a lot of natural light in the stable so then it is daylight outside the system lower the power of the spotlights to save power and lifetime.