Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
S.U.Madusanka CV
1. SUBASINGHE UPUL MADUSANKA
16,Morris Street, Hokowhitu, Palmerston North, 4410 |+64223649669|
upulmadusanka@gmail.com
Career Goals
To utilize my technical skills for achieving the target and developing the best performance in the
organization. I would like to implement my innovative ideas, skills and creativity for
accomplishing the projects.
Professional Skills
Technical Knowledge and Skills
Excellent practical knowledge in:
- HVAC cooling load calculation
- HVAC piping and ducting system design
- Fire protection and detection system design
- Plumbing system design
- Radiant floor heating system design
- Geothermal system design
- AutoCAD software
- MEP Revit software
- Carrier HAP software
- Duct sizer software
- Eviews software
- Microsoft suite of products
Working knowledge on HeatCAD, LoopCAD software.
Working knowledge on Hevacomp software.
Familiar with SAP system and MATH LAB software.
Practical knowledge in operating Lathe machine, Milling machine, drilling machine.
Other Professional Strengths
Experience in building and maintaining excellent relationships with suppliers, technicians,
colleagues and clients.
Proven history of handing over the sites according to the time schedule.
Competent in facilitating group discussions, problem solving, reporting and persuading for
effective project delivery to achieve task objectives.
Experience in working with people from a wide range of cultural backgrounds.
Proven history of trouble shooting and problem solving on a technical and project level.
Proven record of research and development, process development applied field research and
diagnostics.
2. Employment History
Freelance Projects
Design Engineer (May 2014 to Current)
Taking a project from the conception, development, final design and construction
management of the design for Air Conditioning Systems, Fire Protection & Detection
Systems and Plumbing System for residential, commercial and industrial buildings.
Successful completion more than 40 projects by using various building codes for
worldwide customers.
Freelance
Mathematical Tutor (2007 to 2015)
Planning & delivering well-structured mathematical lessons which engage & motivate
Advanced Level students to enter the university.
Tutoring Advanced Mathematics for university students.
Central Engineering Consultancy Bureau
Mechanical Engineer-Building Services (December 2014 to September 2015)
Responsible for project conception, development and final design for HVAC & fire
protection systems.
Responsible for engineering and supervision of design and installation in compliance with
standard building codes and ordinance.
Coordination with clients, architects, vendors and contractors and attending for weekly
meetings.
Extensive management level interaction with multinational agencies, vendors and
contractors.
Projects Completed:
Defense Headquarter Complex, Akuregoda, Sri Lanka
The Defence Headquarters Complex (DHQC) is being constructed at Akuregoda,
Battaramulla, Sri Lanka comprising Main Complex and Residential Complex. Main
Complex consists of 8 numbers of 10 storied building Blocks with an open area in the
middle. The main aim of the project is to construct a building complex to centralize the
tri forces to one location of the country. The gross floor area of the complex is
approximately 432,000 m2 and estimated project value is US $ 520 million.
Kothalawala Defense Hospital, Werahera, Sri Lanka
The Kotelawala Defence University Teaching Hospital (KDU - TH) is being constructed in
Werahera, Sri Lanaka. It’s one of the largest Hospital in Sri Lanka with 704 number of beds
and 21 number of operation theaters. The building include 12 stories and gross floor area
is 60,800 m2 and the estimated project cost US $ 201.6 million.
3. Employment History continued…
Civimech Pvt Ltd.
Mechanical Engineer (July 2013 to December 2014)
• Designing HVAC systems according to BS Code, SMACNA & ASHRAE standards.
• Preparation of data sheets, specification and material requisition for HVAC systems such as
chiller, AHU, package unit, ducts, VRV, pipe, exhaust fans, HVAC control panel etc.
• Design check for constructability and highlight critical designs.
• Site supervision- quantify all task and set duration with productivity requirement as per
planning, quantify surveying, billing and verification.
• Inspecting site progress for work produced by contractor and subcontractor.
• Making inspection with clients for all erection works and overseeing quality control and safety
procedures at site.
• Making a comparison between different HVAC equipment costs, power consumption,
performance and monthly costs of systems.
• Preparation of technical room data sheets, HVAC heat load calculations, Duct/pipe design,
Routing calculation and static pressure calculation based on ASHRAE standards.
Completed projects included:
Working as a Site Engineer at Cargills Square Shopping Complex, Jaffna Sri Lanka– a
building with 3 stories including underground car park. Total Project capacity is 430 ton.
(10 no of 20 ton water cool package, 3 no of 30 ton VRV system and 40 ton, 30 ton and 20
ton air cool package)
Working as a Site Engineer at Havelock City Apartment Complex, Colombo Sri Lanka – a
building with two tower 22 stories. (365 no of ventilation fan for toilet, kitchen, generator
room….etc.)
Design, Supply, Installation, Testing and Commissioning of Air Conditioning and
Ventilation System at Burger King Restaurant in Kandy City Centre Sri Lanka.
Design, preparation of Cost estimation Documents and drawings of VRV System at Mega
Phama building in Dehiwala, Sri Lanka.
Design, Cost estimation and Drawing of Air Conditioning System at City Hotel, Colombo,
Sri Lanka.
Design, preparation of Cost estimation Documents and drawings of Air Conditioning
System and Ventilation System at Sehans Pvt Ltd, Kollupitiya, Sri Lanka.
Abans Electrical Pvt Ltd.
Customer Service Centre Manager (April 2013 to July 2013)
Oversaw daily activities and supervised a team of customer service representatives who
provide technical support to company’s customers.
Solved all major customer problems that subordinates were not able to solve earlier.
Trained and supervised customer service professionals to ensure an optimum satisfaction
of clients.
Managed a team of 35 no. of members of Clients Services Associates that focused on
meeting customer service efficiency and quality standards.
State Development and Construction Co-operation
Trainee Engineer (March 2011 to August 2011)
• Supervising a team of technicians and allocating them for assigned works in day duties.
• Working on SAP system.
4. Current Professional Memberships
Graduate member of Institute of Professional Engineers New Zealand (1152299)
Associate member of Institute of Engineers Sri Lanka (AM-15551)
Associate member of Institute of Mechanical Engineers United Kingdom (80307079)
Education
Postgraduate Diploma in International Studies
IPU Tertiary Institute Palmerston North, New Zealand (2015)
Qualifications
Bachelor of the Science of Engineering
Department of Mechanical Engineering University of Moratuwa Sri Lanka (2013)
Projects completed
Final year project based on Design and build a Low cost mini Paper Recycling
plant.
Did a Process flow analysis for Highray Engineering CO. (at Polgasowita)
Workshop, to improve efficiency of production line
Designed an Automated Bag security System (group project under level 3
Machine Design & Project Subject).
Designed and built Rubber sheet cutting machine.
Referees
CEng. Jayantha Jeffry Jayasinghe, Eng. A. Senadheera,
Deputy General Manager (Electro Mechanical), Chief Engineer,
Central Engineering Consultancy Bureau, Civimech Pvt Ltd,
Colombo 07, Kohuwala,
Sri Lanka. Sri Lanka.
Tel: +94714452167 Tel: +94772441090
Email: cecbmech@yahoo.com Email: athula@civimech.com
Dr. Robert L. Khan,
Lecturer,
IPU Tertiary Institute,
Palmerston North,
New Zealand.
Tel: 021485234
Email: robertkhan@xtra.co.nz