(INDIRA) Call Girl Bhosari Call Now 8617697112 Bhosari Escorts 24x7
ย
ppt for conferance.pptx
1. INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS FOR CLEAN
ENERGY AND HEALTH APPLICATIONS
(AMCEHA - 2023)
S.TAMIL SELVAN,ASSISTANT PROFESSOR,RATHINAM TECHNICAML CAMPUS,COIMBATORE
INTRODUCTION
RESULT
ABSTRACT
MATERIALS SELECTION
CONCLUSIONS
REFERENCES
CONTACT
The aim of this research was to
design a structurally stable and
low weight chassis for an
electric motorcycle using
composite material called
Innegra S-Fiber. With the
increasing pollution and stricter
emission norms, there is an
urgent need to switch to green
technology. In India, 62% of
petrol is consumed by
motorcycles. Therefore, there is
a major scope of reducing
pollution through electrically
driven motorcycles., Present
work attempted to design the
chassis for electric motor driven
motorcycle for street legal
transportation.
portrays a bar chart that effectively visualizes
the reduction in frame deformation across
various materials. The chart accentuates the
distinct behaviors of different materials under
the specified loading conditions. Notably, the
bar chart highlights that Aluminum (Al 6061)
experiences a higher degree of deformation,
making it the most susceptible material under
these conditions. In comparison, Titanium
(Ti6Al4V) exhibits less deformation than
Aluminum, demonstrating its superior
resistance to deformation.
Selecting the right material for the bicycle
frame was driven by cost-effectiveness and
weight considerations. While steel has been a
common choice historically, Innegra S-Fiber
was chosen due to its lightweight nature and
stiffness. Innegra S-Fiber's properties were
compared with other materials. Innegra which
means itโs a synthetic fiber made from
polyolefin polypropylene.
Based on these findings, a conclusion can be
drawn. The incorporation of Innegra S-Fiber
into the final bicycle frame design stands as an
exceptional choice. This selection not only
ensures high strength but also facilitates the
achievement of a low-weight, high-quality
bicycle frame. In essence, the project attains its
primary objective of creating an electric
commuter bicycle concept that promises a
unique blend of durability, lightweight
construction, and overall excellence.
In the context of urbanization challenges and
escalating air pollution, bicycles are
spearheading a revolution towards sustainable
transportation. However, to make bicycles an
attractive primary mode of transport, they need
to be practical and utility-focused. Unlike
recreational bicycles designed for racing and
mountain biking, utility bicycles must cater to
short commutes, carrying goods, shopping, and
everyday tasks. This research aims to design the
ideal utility bicycle, considering factors such as
material, geometry, and strength.
S.TAMIL SELVAN ,
ASSISTANT PROFESOR
DEPARTMENT OF MECHANICAL ENGINEERING
RATHINAM TECHNICAL CAMPUS,
COIMBATORE
Figure 2. Refined mesh in most critical and
geometrically complex areas.
Table 2 Deformation of different materials
under different loading cases.
DESIGN AND ANALYSIS
Table 1. Final geometry for frameset
Figure 1. Bicycle frameset geometry
Figure 4 Most complex loading condition
more detailed analysis.
Figure 3 .Bar chart of deformation under loading
conditions.
Table 3 Weight of frame with different
materials
CONCLUSION