The document provides instructions for installing the Renault CAN Clip V145 diagnostic interface software. It involves:
1. Inserting the installation CD and copying files to the desktop.
2. Running the installation which automatically sets up the interface software.
3. Finding and inputting an unlocking code to complete registration of the software.
4. Updating firmware and configuring the interface by filling in vehicle information.
What are the differences between an international company, a global company, ...
Renault can clip v145 installation instructions
1. Numéro de l'article. SP19-A
http://www.diyobd2.fr/wholesale/renault-can-clip-diagnostic-interface.html
Renault CAN Clip V145 Installation Instructions
Here comes with instructions for the newest V145 CAN Clip software installation.
1. Insert the CD (V145 version) into computer CD driver, and to open it.
2. Find the file “Renault CAN-CLIP RegistrationPatch V3.0” and then copy it to the desktop.
3. Open the file and double-click “Crack! Renault CAN-CLIP.reg Registration Entries”, and then
click “Yes” and continually click “OK”
4. Find and double-click “setup.exe”, it will automatically enter into a new interface (see the
following picture).
2. 5. Click “FIRST INSTALLATION”>> “I accept the term of the license agreement”>> “Next”, and then
choose the country (if your country is out of list, please click “OTHER COUNTRIES”), and click Next
to continue.
6. Select language, and then click Next, it will automatically go on installation (You just need to
operate according the tips to make sure its normal installation).
7. Installation done, it pops out a hint “The platform will restart automatically”.
3. 8. Right click “CLIP” on the laptop and choose “Properties”>> “Find Target”, and to find and Cut
“RSRWin.exe” into desktop.
9. Open “Renault CAN-CLIP Registration Patch V3.0” on the desktop and also open “Renault
CAN-CLIP Registration Patch V3.0” file, find “RSRWin.exe”, next copy and paste it into the blank of
Step 8 (i.e. to as substitute for “RSRWin.exe” cut into desktop)
4. 10. Open “RSRWin.exe”(being pasted into C’CLIP_X91LibApplication).
11. Then it will pop out a new interface, Click “Register me now” to pop out message “Are you
part of the Renault Network?” and to select “No”.
5. 12. Next, a new interface pops out asking for the unlocking code. You can see Step 8 the file
“Renault CAN-CLIP RegistrationPatch V3.0” to get unlocking code and input them.
13. Put the “RSRWin.exe” (previously cut into desktop, mark red) to substitute for
“RSRWin.exe”(in the C’CLIP_X91LibApplication).
6. 14. Open “Found New HardwareWizard”, select ”Next” and finish.
15. Click “Clip” on the desktop, it will pop out a new interface and automatically update sensor
firmware.
16. Fill in Vehicle VIN and click “OK”, and complete the information shown at picture below, and
then click “COMPUTER TEST”.
