This document describes the ZYS High-Efficient Cone Crusher produced by Shanghai Joyal Mining Machinery Co., Ltd. It states that the cone crusher can crush materials with medium and high hardness like metal ore, basalt, granite, and limestone. It has features like excellent tramp release system, unique hydraulic lifting system, and high crusher throw that ensure high performance for secondary, tertiary and quaternary applications. The document provides details on the components, working principle, specifications, and advantages of the ZYS High-Efficient Cone Crusher.
The Jawmaster is a single toggle jaw crusher from Sandvik that provides high production and low costs. It combines high strength with low weight through its welded frame and attention to detail in design and manufacturing. It has features that allow for high capacity, high reduction, low jaw plate wear, and a large feed acceptance capability.
Hammer crusher is used for crushing medium hard materials with weak abrasiveness, and the compression strength of the materials to be crushed should not exceed 100MPa, and the water content should be lower than 15%. The materials that can be crushed by hammer crusher include coal, salt, chalk, gypsum
The document describes the SM Series of high performance machining centers from Smart Machine Tool. It provides specifications for several models including the SM 212/312/412/316, SM 600/1000, and SM 965/1165/1365/1565/1575. Key features highlighted include box way construction, spindle configurations with up to 12,000 rpm, tool changers with 24-40 tools, rigid machine structures, and chip removal systems.
The document describes a new double hacksaw cutting machine that aims to improve upon previous hacksaw machines. It can cut materials at a higher speed and in a more efficient manner than traditional single-cut hacksaw machines. The double hacksaw machine uses a crank mechanism to convert the rotational motion of an electric motor into a reciprocating motion that drives two cutting blades simultaneously on either side of the machine. This double-cutting attachment allows the production rate to be increased compared to single-cut machines. The new machine is also more compact, portable, easy to use, and maintenance-friendly. It has potential applications for small-scale industries.
Design and fabrication of multiway hacksaw machine pptEshver chandra
In this project work and effort has been made to develop a modernized multi way hacksaw machine and less stress full operation for cutting wood, metal and plastic materials. The aim of this work is to develop a hacksaw machine that will use a less effort to produce uniform cutting of PVC pipes, metals, wood. It is also done to show the performance difference between hand driven, pedal drive and multi way hacksaw machine.
This document provides information about a multi-way power hacksaw machine. It begins with an introduction that explains how this machine can cut four metal bars simultaneously, achieving high production rates. It then discusses the scotch yoke mechanism that converts linear motion to rotational motion. Various types of hacksaw machines are described, including power hacksaw machines, hydraulic hacksaw machines, circular band saw machines, and more. The construction of hacksaw machines is explained, covering components like the bed, saw frame, and drive system.
This document provides an overview of hacksaw machines and their operation. It discusses the basic components and working principle of hacksaw machines. Specifically, it notes that hacksaw machines use removable blades with teeth to cut materials like metal pipes. It also discusses the different types of hacksaw machines, including gravity feed and hydraulic machines. Hydraulic machines are able to develop greater cutting forces. The document also briefly summarizes other sawing methods like band sawing and circular sawing that are alternatives to hacksaw cutting.
This document describes a project report submitted for the degree of Bachelor of Engineering in Mechanical Engineering. The project involves the design and fabrication of a crankshaft-operated double hacksaw machine. The report includes an introduction outlining the objectives and justification of the project. It also provides a literature review on hacksaw machines and the types of hacksawing. The report then discusses the project methodology, components used, and working of the machine. It concludes with the results, discussion, and scope for future work. The overall aim is to develop an automated hacksaw machine that can cut multiple pieces simultaneously to improve productivity.
The Jawmaster is a single toggle jaw crusher from Sandvik that provides high production and low costs. It combines high strength with low weight through its welded frame and attention to detail in design and manufacturing. It has features that allow for high capacity, high reduction, low jaw plate wear, and a large feed acceptance capability.
Hammer crusher is used for crushing medium hard materials with weak abrasiveness, and the compression strength of the materials to be crushed should not exceed 100MPa, and the water content should be lower than 15%. The materials that can be crushed by hammer crusher include coal, salt, chalk, gypsum
The document describes the SM Series of high performance machining centers from Smart Machine Tool. It provides specifications for several models including the SM 212/312/412/316, SM 600/1000, and SM 965/1165/1365/1565/1575. Key features highlighted include box way construction, spindle configurations with up to 12,000 rpm, tool changers with 24-40 tools, rigid machine structures, and chip removal systems.
The document describes a new double hacksaw cutting machine that aims to improve upon previous hacksaw machines. It can cut materials at a higher speed and in a more efficient manner than traditional single-cut hacksaw machines. The double hacksaw machine uses a crank mechanism to convert the rotational motion of an electric motor into a reciprocating motion that drives two cutting blades simultaneously on either side of the machine. This double-cutting attachment allows the production rate to be increased compared to single-cut machines. The new machine is also more compact, portable, easy to use, and maintenance-friendly. It has potential applications for small-scale industries.
Design and fabrication of multiway hacksaw machine pptEshver chandra
In this project work and effort has been made to develop a modernized multi way hacksaw machine and less stress full operation for cutting wood, metal and plastic materials. The aim of this work is to develop a hacksaw machine that will use a less effort to produce uniform cutting of PVC pipes, metals, wood. It is also done to show the performance difference between hand driven, pedal drive and multi way hacksaw machine.
This document provides information about a multi-way power hacksaw machine. It begins with an introduction that explains how this machine can cut four metal bars simultaneously, achieving high production rates. It then discusses the scotch yoke mechanism that converts linear motion to rotational motion. Various types of hacksaw machines are described, including power hacksaw machines, hydraulic hacksaw machines, circular band saw machines, and more. The construction of hacksaw machines is explained, covering components like the bed, saw frame, and drive system.
This document provides an overview of hacksaw machines and their operation. It discusses the basic components and working principle of hacksaw machines. Specifically, it notes that hacksaw machines use removable blades with teeth to cut materials like metal pipes. It also discusses the different types of hacksaw machines, including gravity feed and hydraulic machines. Hydraulic machines are able to develop greater cutting forces. The document also briefly summarizes other sawing methods like band sawing and circular sawing that are alternatives to hacksaw cutting.
This document describes a project report submitted for the degree of Bachelor of Engineering in Mechanical Engineering. The project involves the design and fabrication of a crankshaft-operated double hacksaw machine. The report includes an introduction outlining the objectives and justification of the project. It also provides a literature review on hacksaw machines and the types of hacksawing. The report then discusses the project methodology, components used, and working of the machine. It concludes with the results, discussion, and scope for future work. The overall aim is to develop an automated hacksaw machine that can cut multiple pieces simultaneously to improve productivity.
This document provides details on the design and fabrication of a hacksaw machine project. It includes an introduction describing the objective to automate a conventional power hacksaw machine to achieve higher productivity. It then covers the various chapters that will be included in the project report such as literature review, description of equipment like AC motors and pulleys, design and working principles. The last few chapters will cover the merits, applications, materials list, cost estimation and conclusion.
This document provides an overview and index for a conveyor belt handbook. It describes various belt reinforcement materials and their properties, including fabrics made from polyester, nylon, cotton, and steel cord. It also discusses belt cover compounds made from materials like natural rubber, polybutadiene, styrene butadiene, and nitrile rubber that are suitable for general service, high heat, chemicals, and fire resistance. The index previews topics that will be covered in the handbook such as belt capacity calculations, power and tension, construction, pulley design, and special belt types for applications like mining.
Stl cnx - weld - solutions to design of weldments - blodgettDurim Bajrami
This document provides guidance on permissible stresses for weld metal in various types of welds, including complete penetration groove welds, partial penetration groove welds, fillet welds, and plug and slot welds. It specifies the required strength levels for weld metal based on the type of stress it experiences. It also provides a table matching weld metal strength levels to common base metal grades. The document aims to help engineers properly design welded connections and ensure welds have sufficient strength.
This document provides an overview of lathe machines. It begins with a brief history of lathes, noting they originated from primitive tree lathes. It then describes the basic principle of lathes is to rotate a workpiece while a single-point cutting tool removes material parallel to the axis of rotation, producing a cylindrical surface. Various types of lathes are classified based on their design and intended use, such as bench lathes, engine lathes, tool room lathes, capstan and turret lathes, and automatic lathes. The construction and function of key lathe components like the bed, headstock, spindle, tailstock, carriage, and apron are explained.
This document discusses the force analysis of a Geneva wheel and face cam used in an automat machine. The automat is used in the insulator pre-assembly line of spark plug manufacturing. It contains details of the components, their geometry, material properties, forces acting on them, and the methodology for analyzing the stresses using CAD, FEA, and simulation software. Specifically, it calculates the tangential forces on the Geneva wheel at its minimum and maximum positions during drum indexing. It also calculates the tangential forces on the face cam during workpiece carrier indexing, as well as the effective force and torque acting on the cam. The results and discussions section presents the material properties, mesh details, boundary conditions, and loading cases considered for the F
This document discusses automatic lathes and their operation. It begins by defining automatic lathes and their role in increasing production. It then describes the different types of automatic lathes including fully automatic, semi-automatic, single spindle, and multi-spindle lathes. The working principles of automatic lathes are explained, including the use of cams to control tool and turret movement. Various operations that can be performed on automatic lathes are listed. Finally, aspects like tooling layout and cam design that are important for planning automatic lathe processes are covered.
1. A shaft transmits power and rotational motion and has machine elements like gears and pulleys mounted on it.
2. Press fits, keys, dowel pins, and splines are used to attach machine elements to the shaft.
3. The shaft rotates on rolling contact or bush bearings and uses features like retaining rings to take up axial loads.
4. Couplings are used to transmit power between drive and driven shafts like between a motor and gearbox.
The document discusses various topics related to screwed joints and fastenings including:
1. The advantages and disadvantages of screwed joints.
2. Important terms used in screw threads such as major diameter, pitch, and crest.
3. Different types of screw threads including British Standard, American, and metric threads.
4. Factors to consider when locating screwed joints such as reducing bending stresses.
5. Common types of screw fastenings like through bolts, studs, and set screws.
'Vertical shaft impact crusher is also called sand maker which is highly efficient stone crushing equipment with domestic and international leading level researched and manufactured by Hongxing Machinery on the basis of introducing the famous “stone impacting stone” crusher principle
This document provides an overview of machine design concepts including the basic design process, factors to consider in design, and design of simple machine elements. It discusses the definition of machine design as using scientific principles and imagination to design machines to perform functions efficiently. The basic design process involves understanding requirements, analyzing loads, selecting materials, choosing dimensions, and specifying tolerances. Simple elements discussed include cotter joints, knuckle joints, levers, and components under eccentric loading. Design of these elements involves calculating stresses and selecting dimensions to prevent failure under various loading conditions like tension, shear, bending, and crushing. Standards and preferred sizes are also important considerations in efficient machine design.
Trituradora de material mineral primario de carbónjoyalcrusher
Stationay trituradora de mandíbula es una buena opción como carbón trituradora de mandíbulas primaria de grueso y medio de trituración, lo que es más, la trituradora de mandíbula móvil es un buen equipo de trituración primaria, es ampliamente utilizado en la minería, materiales, carretera, vía férrea y las industrias hidráulicas, etc construcción . mandíbula móvil de trituración http://joyaltrituradora.com/product/Mobile-Crushing-Plant.html y cribado de plantas puede ser terminado en un tiempo para producir el tamaño y la capacidad requerida. Para la minería del carbón, la máquina trituradora móvil de carbón es una excelente elección. Puede eliminar los obstáculos de los lugares y circunstancias de trituración, y ofrecen la máxima eficiencia y plantas de los proyectos de bajo coste para el cliente.
Trituradora de mandíbula http://joyaltrituradora.com/product/Jaw-Crusher.html es la trituradora de mineral primario de carbón triturado. Está diseñado para aplastar de manera eficiente todo, incluso más dura piedra y materiales reciclados. Los Joyal trituradoras de piedra http://joyaltrituradora.com/product/Crushing.html están diseñadas para el servicio de larga duración con un mantenimiento mínimo para duro, resistente, material abrasivo y de alta capacidad de sobrecarga.
Primay carbón trituradora de mandíbula
Joyal tiene muchos tipos de trituradoras de mineral http://joyaltrituradora.com/index.html para la venta, como la trituradora de mandíbula, trituradora de cono, trituradora de impacto, trituradora de martillos, trituradora móvil, trituradora de impacto vertical del eje y así sucesivamente. Carbón Primay trituradora de mandíbula fabricado por Joyal es trituradoras de clase premium debido a su diseño, así como a los materiales que se utilizan para producirlas, a fin de garantizar la máxima funcionalidad y fiabilidad posible, sin ningún compromiso. Cada modelo se prueba prácticamente para el estrés, tensión, choque, la deformación, la carga térmica, la vibración y el ruido en una amplia gama de condiciones de carga. El resultado es una fiabilidad excepcional.
¿Por qué elegir la trituradora de mandíbula como primaty carbón equipos de trituración
PE trituradora de mandíbula es adecuado para la trituración primaria y secundaria y se puede procesar la resistencia a la compresión de materia prima menos de 320Mpa. Además, la trituradora de mandíbula para el carbón tiene el diseño de la cavidad derecha para la cavidad es el corazón y el propósito principal de la trituradora de mandíbulas. La abertura de alimentación adecuado que racionar profundidad asegura el bloqueo mínimo y se elimina la altura necesaria de la trituradora. Los perfiles de los dientes y el espesor de la trituradora de mandíbula se trabajan y se combinan con las aleaciones de acero al manganeso adecuadas para maximizar el rendimiento y minimizar los costos de operación. La capacidad de producción de 10-1300t / h con el máximo de alimentación es de 1250mm. PE
The document discusses the selection and use of bearings. It describes the functions of bearings as supporting loads on shafts and locating the shaft position. It outlines types of bearings as sliding contact or rolling contact. Rolling contact bearings include ball bearings and roller bearings. When selecting a bearing, factors to consider include load type (radial, thrust, or combined), load capacity, dimensions, intended use conditions, and desired service life. Installation of ball bearings requires proper shaft and housing design, lubrication provision, and sealing.
Pioneer Machinery manufactures a variety of bearing products for industrial customers. It was founded in 1990 and has since expanded its product lines through acquisitions and innovations. Today it focuses on developing high-performance bearings for demanding applications in industries such as oil and gas.
This document provides information about planer machines. It begins with an introduction and overview of planers, noting they have reciprocating work and fixed tools. It then discusses the differences between planers and shapers, noting key differences in construction, operation, size, accuracy and power consumption. The document outlines the main parts of a planer, including the bed, table, columns, cross-rail and tool heads. It also describes various types of planers based on construction and drive methods. In closing, it discusses quick return mechanisms and feed mechanisms used in planers.
Rotary vibrating screen product introductionJenny Ma
Rotary vibrating screen is designed as a high-precision screening machinery. Round vibrating sieve is composed of vertical motor,and eccentric weight installed at two ends.
This document discusses shafts and shaft design. It covers several topics:
1) Shaft distortion can occur due to bending moments, transverse shear forces, and torsional loads. Geometric fidelity of the shaft is important for transmitting power and motion between rotating elements.
2) Bending induces lateral deflections and slopes at shaft sections. Tabular methods can be used to calculate deflections and slopes by integrating the bending moment diagram.
3) Transverse shear forces also cause shaft distortion, which is analyzed separately from bending effects. Shaft materials, loads, stresses, strength, critical speeds, and hollow shaft designs are also addressed.
The document provides information about sand making machines. It describes the inner structure, which includes a feeding device, distributor, and whirling motion crushing chamber. It also explains that the machine is suitable for medium and fine crushing of various hard materials to make building sand and road paving sand. Key features include being low in energy consumption, high in output, and having a protective basement that reduces abrasion.
Design and Analysis of Connecting Rod of Diesel Engineijtsrd
The main objective of this study is to review the weight optimization and cost reduction of a connecting rod in a Diesel engine. To get the idea about designing the connecting rod, various stresses to be considered while designing the connecting rod .This has entailed performing a detailed load analysis. The most important factors that are concentrated are stress distribution and deflections. In this project the connecting rod is designed with respect to all the available constraints using advanced cad software CATIA. Later the product file is converted to .stp file format standard exchange of product file and imported to ANSYS workbench to find deformation and analytic valve with respect to the model or product definitions. A. Vijay Kumar | K. Mihir | M. Mrudul | P. Pavan Kumar ""Design and Analysis of Connecting Rod of Diesel Engine"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23182.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23182/design-and-analysis-of-connecting-rod-of-diesel-engine/a-vijay-kumar
The Building mechanism of Speed frame
is very complicated in the view of its
mechanical drive system.
So That is Why There was a big demand of
development in building motion.
Since Builder Motion has to perform so many task:
• Reduction in RPM of Bobbin (Through Shifting of Belt)
• Up-Down Movement of the bobbin Rail
• Shortening of the traverse length to make ends taper
Shanghai Long Jing heavy machinery Co., LTD produces several types of crushers:
1. Jaw crushers are used for rough crushing of materials with compressive strength up to 320MPa. They have high crushing ratios and produce uniformly sized output.
2. Impact crushers can process materials up to 500mm in size and 350MPa in strength to produce cube-shaped output. They are used in industries like construction.
3. Vertical shaft impact crushers use high-speed rotors and have features like low energy use, stable operation, and suitability for sand production. Materials are crushed through impact and grinding.
4. Cone crushers have high frequency and an optimized cavity. They
1. The document introduces crawler mobile crushers produced by Shanghai Joyal Mining Machinery Co., Ltd.
2. Crawler mobile crushers are high performance, reliable machines that use advanced crushing and screening technology.
3. The crushers can be used for construction, mining, and other industries and feature a diesel engine, strong motors, efficient screening, and a ship-shaped chassis for transportation over different terrains.
Jaw crushers are used for size reduction of hard and large lumps of ore. Crushers employ compression to break solid materials into smaller pieces. A primary crusher breaks material to 150-250mm while a secondary crusher further reduces it to about 6mm. Jaw crushers consist of two jaws, one fixed and one moving, that crush material in a wedge-shaped crushing area until small enough to escape.
This document provides details on the design and fabrication of a hacksaw machine project. It includes an introduction describing the objective to automate a conventional power hacksaw machine to achieve higher productivity. It then covers the various chapters that will be included in the project report such as literature review, description of equipment like AC motors and pulleys, design and working principles. The last few chapters will cover the merits, applications, materials list, cost estimation and conclusion.
This document provides an overview and index for a conveyor belt handbook. It describes various belt reinforcement materials and their properties, including fabrics made from polyester, nylon, cotton, and steel cord. It also discusses belt cover compounds made from materials like natural rubber, polybutadiene, styrene butadiene, and nitrile rubber that are suitable for general service, high heat, chemicals, and fire resistance. The index previews topics that will be covered in the handbook such as belt capacity calculations, power and tension, construction, pulley design, and special belt types for applications like mining.
Stl cnx - weld - solutions to design of weldments - blodgettDurim Bajrami
This document provides guidance on permissible stresses for weld metal in various types of welds, including complete penetration groove welds, partial penetration groove welds, fillet welds, and plug and slot welds. It specifies the required strength levels for weld metal based on the type of stress it experiences. It also provides a table matching weld metal strength levels to common base metal grades. The document aims to help engineers properly design welded connections and ensure welds have sufficient strength.
This document provides an overview of lathe machines. It begins with a brief history of lathes, noting they originated from primitive tree lathes. It then describes the basic principle of lathes is to rotate a workpiece while a single-point cutting tool removes material parallel to the axis of rotation, producing a cylindrical surface. Various types of lathes are classified based on their design and intended use, such as bench lathes, engine lathes, tool room lathes, capstan and turret lathes, and automatic lathes. The construction and function of key lathe components like the bed, headstock, spindle, tailstock, carriage, and apron are explained.
This document discusses the force analysis of a Geneva wheel and face cam used in an automat machine. The automat is used in the insulator pre-assembly line of spark plug manufacturing. It contains details of the components, their geometry, material properties, forces acting on them, and the methodology for analyzing the stresses using CAD, FEA, and simulation software. Specifically, it calculates the tangential forces on the Geneva wheel at its minimum and maximum positions during drum indexing. It also calculates the tangential forces on the face cam during workpiece carrier indexing, as well as the effective force and torque acting on the cam. The results and discussions section presents the material properties, mesh details, boundary conditions, and loading cases considered for the F
This document discusses automatic lathes and their operation. It begins by defining automatic lathes and their role in increasing production. It then describes the different types of automatic lathes including fully automatic, semi-automatic, single spindle, and multi-spindle lathes. The working principles of automatic lathes are explained, including the use of cams to control tool and turret movement. Various operations that can be performed on automatic lathes are listed. Finally, aspects like tooling layout and cam design that are important for planning automatic lathe processes are covered.
1. A shaft transmits power and rotational motion and has machine elements like gears and pulleys mounted on it.
2. Press fits, keys, dowel pins, and splines are used to attach machine elements to the shaft.
3. The shaft rotates on rolling contact or bush bearings and uses features like retaining rings to take up axial loads.
4. Couplings are used to transmit power between drive and driven shafts like between a motor and gearbox.
The document discusses various topics related to screwed joints and fastenings including:
1. The advantages and disadvantages of screwed joints.
2. Important terms used in screw threads such as major diameter, pitch, and crest.
3. Different types of screw threads including British Standard, American, and metric threads.
4. Factors to consider when locating screwed joints such as reducing bending stresses.
5. Common types of screw fastenings like through bolts, studs, and set screws.
'Vertical shaft impact crusher is also called sand maker which is highly efficient stone crushing equipment with domestic and international leading level researched and manufactured by Hongxing Machinery on the basis of introducing the famous “stone impacting stone” crusher principle
This document provides an overview of machine design concepts including the basic design process, factors to consider in design, and design of simple machine elements. It discusses the definition of machine design as using scientific principles and imagination to design machines to perform functions efficiently. The basic design process involves understanding requirements, analyzing loads, selecting materials, choosing dimensions, and specifying tolerances. Simple elements discussed include cotter joints, knuckle joints, levers, and components under eccentric loading. Design of these elements involves calculating stresses and selecting dimensions to prevent failure under various loading conditions like tension, shear, bending, and crushing. Standards and preferred sizes are also important considerations in efficient machine design.
Trituradora de material mineral primario de carbónjoyalcrusher
Stationay trituradora de mandíbula es una buena opción como carbón trituradora de mandíbulas primaria de grueso y medio de trituración, lo que es más, la trituradora de mandíbula móvil es un buen equipo de trituración primaria, es ampliamente utilizado en la minería, materiales, carretera, vía férrea y las industrias hidráulicas, etc construcción . mandíbula móvil de trituración http://joyaltrituradora.com/product/Mobile-Crushing-Plant.html y cribado de plantas puede ser terminado en un tiempo para producir el tamaño y la capacidad requerida. Para la minería del carbón, la máquina trituradora móvil de carbón es una excelente elección. Puede eliminar los obstáculos de los lugares y circunstancias de trituración, y ofrecen la máxima eficiencia y plantas de los proyectos de bajo coste para el cliente.
Trituradora de mandíbula http://joyaltrituradora.com/product/Jaw-Crusher.html es la trituradora de mineral primario de carbón triturado. Está diseñado para aplastar de manera eficiente todo, incluso más dura piedra y materiales reciclados. Los Joyal trituradoras de piedra http://joyaltrituradora.com/product/Crushing.html están diseñadas para el servicio de larga duración con un mantenimiento mínimo para duro, resistente, material abrasivo y de alta capacidad de sobrecarga.
Primay carbón trituradora de mandíbula
Joyal tiene muchos tipos de trituradoras de mineral http://joyaltrituradora.com/index.html para la venta, como la trituradora de mandíbula, trituradora de cono, trituradora de impacto, trituradora de martillos, trituradora móvil, trituradora de impacto vertical del eje y así sucesivamente. Carbón Primay trituradora de mandíbula fabricado por Joyal es trituradoras de clase premium debido a su diseño, así como a los materiales que se utilizan para producirlas, a fin de garantizar la máxima funcionalidad y fiabilidad posible, sin ningún compromiso. Cada modelo se prueba prácticamente para el estrés, tensión, choque, la deformación, la carga térmica, la vibración y el ruido en una amplia gama de condiciones de carga. El resultado es una fiabilidad excepcional.
¿Por qué elegir la trituradora de mandíbula como primaty carbón equipos de trituración
PE trituradora de mandíbula es adecuado para la trituración primaria y secundaria y se puede procesar la resistencia a la compresión de materia prima menos de 320Mpa. Además, la trituradora de mandíbula para el carbón tiene el diseño de la cavidad derecha para la cavidad es el corazón y el propósito principal de la trituradora de mandíbulas. La abertura de alimentación adecuado que racionar profundidad asegura el bloqueo mínimo y se elimina la altura necesaria de la trituradora. Los perfiles de los dientes y el espesor de la trituradora de mandíbula se trabajan y se combinan con las aleaciones de acero al manganeso adecuadas para maximizar el rendimiento y minimizar los costos de operación. La capacidad de producción de 10-1300t / h con el máximo de alimentación es de 1250mm. PE
The document discusses the selection and use of bearings. It describes the functions of bearings as supporting loads on shafts and locating the shaft position. It outlines types of bearings as sliding contact or rolling contact. Rolling contact bearings include ball bearings and roller bearings. When selecting a bearing, factors to consider include load type (radial, thrust, or combined), load capacity, dimensions, intended use conditions, and desired service life. Installation of ball bearings requires proper shaft and housing design, lubrication provision, and sealing.
Pioneer Machinery manufactures a variety of bearing products for industrial customers. It was founded in 1990 and has since expanded its product lines through acquisitions and innovations. Today it focuses on developing high-performance bearings for demanding applications in industries such as oil and gas.
This document provides information about planer machines. It begins with an introduction and overview of planers, noting they have reciprocating work and fixed tools. It then discusses the differences between planers and shapers, noting key differences in construction, operation, size, accuracy and power consumption. The document outlines the main parts of a planer, including the bed, table, columns, cross-rail and tool heads. It also describes various types of planers based on construction and drive methods. In closing, it discusses quick return mechanisms and feed mechanisms used in planers.
Rotary vibrating screen product introductionJenny Ma
Rotary vibrating screen is designed as a high-precision screening machinery. Round vibrating sieve is composed of vertical motor,and eccentric weight installed at two ends.
This document discusses shafts and shaft design. It covers several topics:
1) Shaft distortion can occur due to bending moments, transverse shear forces, and torsional loads. Geometric fidelity of the shaft is important for transmitting power and motion between rotating elements.
2) Bending induces lateral deflections and slopes at shaft sections. Tabular methods can be used to calculate deflections and slopes by integrating the bending moment diagram.
3) Transverse shear forces also cause shaft distortion, which is analyzed separately from bending effects. Shaft materials, loads, stresses, strength, critical speeds, and hollow shaft designs are also addressed.
The document provides information about sand making machines. It describes the inner structure, which includes a feeding device, distributor, and whirling motion crushing chamber. It also explains that the machine is suitable for medium and fine crushing of various hard materials to make building sand and road paving sand. Key features include being low in energy consumption, high in output, and having a protective basement that reduces abrasion.
Design and Analysis of Connecting Rod of Diesel Engineijtsrd
The main objective of this study is to review the weight optimization and cost reduction of a connecting rod in a Diesel engine. To get the idea about designing the connecting rod, various stresses to be considered while designing the connecting rod .This has entailed performing a detailed load analysis. The most important factors that are concentrated are stress distribution and deflections. In this project the connecting rod is designed with respect to all the available constraints using advanced cad software CATIA. Later the product file is converted to .stp file format standard exchange of product file and imported to ANSYS workbench to find deformation and analytic valve with respect to the model or product definitions. A. Vijay Kumar | K. Mihir | M. Mrudul | P. Pavan Kumar ""Design and Analysis of Connecting Rod of Diesel Engine"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23182.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23182/design-and-analysis-of-connecting-rod-of-diesel-engine/a-vijay-kumar
The Building mechanism of Speed frame
is very complicated in the view of its
mechanical drive system.
So That is Why There was a big demand of
development in building motion.
Since Builder Motion has to perform so many task:
• Reduction in RPM of Bobbin (Through Shifting of Belt)
• Up-Down Movement of the bobbin Rail
• Shortening of the traverse length to make ends taper
Shanghai Long Jing heavy machinery Co., LTD produces several types of crushers:
1. Jaw crushers are used for rough crushing of materials with compressive strength up to 320MPa. They have high crushing ratios and produce uniformly sized output.
2. Impact crushers can process materials up to 500mm in size and 350MPa in strength to produce cube-shaped output. They are used in industries like construction.
3. Vertical shaft impact crushers use high-speed rotors and have features like low energy use, stable operation, and suitability for sand production. Materials are crushed through impact and grinding.
4. Cone crushers have high frequency and an optimized cavity. They
1. The document introduces crawler mobile crushers produced by Shanghai Joyal Mining Machinery Co., Ltd.
2. Crawler mobile crushers are high performance, reliable machines that use advanced crushing and screening technology.
3. The crushers can be used for construction, mining, and other industries and feature a diesel engine, strong motors, efficient screening, and a ship-shaped chassis for transportation over different terrains.
Jaw crushers are used for size reduction of hard and large lumps of ore. Crushers employ compression to break solid materials into smaller pieces. A primary crusher breaks material to 150-250mm while a secondary crusher further reduces it to about 6mm. Jaw crushers consist of two jaws, one fixed and one moving, that crush material in a wedge-shaped crushing area until small enough to escape.
The document discusses various types of size-reduction equipment, including crushers, grinders, ultrafine grinders, and cutting machines. It describes the main types of crushers as jaw crushers, gyratory crushers, smooth-roll crushers, and toothed-roll crushers. Jaw crushers use compression to break large rocks into smaller pieces, while roll crushers employ compression to crush materials between two rolls. The document also provides details on the working principles and applications of different types of crushers.
The document describes portable crushing plants manufactured by Shanghai Joyal Mining Machinery Co., Ltd. It provides details on their portable jaw crushing plant, portable cone crushing plant, portable impact crushing plant, and mobile VSI crusher. The plants are designed for contractors, quarry operators, and mining applications to crush materials on-site for reduced transportation costs. The plants can be transported easily and set up quickly with integrated support legs. They include feeders, crushers, screens, and conveyors in compact, truck-mounted designs.
Shanghai Joyal Mining Machinery Co., Ltd produces portable crushing plants that can be transported by truck and quickly assembled on site. Their portable plants include jaw, cone, and impact crushers as well as vibrating screens and conveyor belts mounted on a single chassis. The portable design allows crushing to occur near quarries and worksites, reducing material transportation costs.
Shanghai Joyal Mining Machinery Co., Ltd produces portable crushing plants that can be transported by truck and quickly assembled on site. Their portable plants include jaw, cone, and impact crushers as well as vibrating screens and conveyor belts mounted on a single chassis. The portable design allows crushing to occur near quarries and worksites, reducing material transportation costs.
Clirik large capacity ball mill cement ball mill with fairest priceAmmy Cheng
This document summarizes the specifications and features of the Clirik Large Capacity Ball Mill/Cement Ball Mill. Key details include:
- The ball mill is used for grinding materials into fine particle sizes and can grind a variety of materials. It works by rotating a cylinder with grinding balls that impact and grind the materials.
- Models range in cylinder size from 900x1800 to 3600x8500 and have processing capacities from 0.8 to 260 tons per hour. They can produce particle sizes from 75 to 890 microns.
- Features include high production capacity, low energy consumption, simple structure, and low costs. The company is based in Shanghai and has experience manufacturing grinding mills.
This document discusses various types of crushers used to reduce the size of materials including jaw crushers, gyratory crushers, cone crushers, hammer mills, stamp mills, sledging rolls, and spring rolls. It provides details on the basic components and operating mechanisms of different crushers like Blake and Dodge jaw crushers, gyratory crushers, cone crushers, hammer mills, stamp mills, and spring rolls. The document also compares jaw crushers with gyratory crushers and discusses factors affecting the efficiency of crushers.
The document discusses different types of size reduction equipment used in coarse, intermediate, and fine size reduction. For coarse size reduction of hard materials, jaw crushers and gyratory crushers are used. For coarse size reduction of soft materials, hammer mills and tooth roll crushers are used. Intermediate size reduction equipment includes cone crushers and crushing rolls. Fine size reduction or grinding equipment includes ball mills, Raymond mills, and bowl mills. The key mechanisms of size reduction in these equipment are impact, pressure, and shear forces.
1) The document describes various types of grinding ball mills and rod mills manufactured by Hengyang Industry, including their specifications, applications, and technical details.
2) Ball mills are used to grind materials through rotation of a cylindrical shell with grinding medium like steel balls. They come in overflow, grate-discharge, and compartment types.
3) Rod mills use rods instead of balls as the grinding medium and are suitable for fine crushing and grinding of hard materials.
A ball mill consists of a hollow cylindrical shell that rotates about its axis. It is partially filled with balls that can be made in chrome steel, stainless steel, rubber or ceramic. The inner part of the shell is usually lined with an abrasion-resistant material such as manganese steel or rubber. +8615617816797
Stone crushing plant for sand & gravel production, the capacity varies from 10-1000 t/h, size ranges from 0-50 mm, contact us with your detailed requirements so that we can prepare a solution with our factory price.
This document discusses the selection of forging equipment and stock size for open and closed die forging. It begins by classifying forging equipment into work-restricted and stroke-restricted machines such as hammers, presses, and hydraulic presses. It then explains open and closed die forging processes and considerations for die design such as flash, gutter, draft angles, and variation of stroke with load. The document concludes by providing design considerations for blocker, finisher, trim tools, and punches.
This document discusses the selection of forging equipment and stock size for open and closed die forging. It begins by classifying forging equipment into work-restricted and stroke-restricted machines such as hammers, presses, and hydraulic presses. It then describes open and closed die forging processes and considerations for die design such as flash, gutter, draft angles, and variation of stroke with load. The document concludes by providing design considerations for blocker, finisher, trim tools, and punches.
This document discusses various stages and types of crushing in mineral processing. It begins by explaining that crushing is the first mechanical stage where the goal is to liberate valuable minerals from waste rock. It then describes the stages of primary, secondary, and sometimes tertiary crushing needed to reduce the ore size. The main types of primary crushers are jaw and gyratory crushers, while cone crushers are often used for secondary and tertiary crushing. The document goes on to provide detailed descriptions of how jaw, gyratory, and cone crushers work. It also briefly mentions other less common crusher types such as impact and roll crushers.
Sy series multiple cylinder hydraulic cone crusherSHANHU GROUP
The document provides installation and maintenance instructions for SY series cone crushers. It describes the crusher components and operating principles in 3 pages, then discusses installation requirements and procedures over 7 pages. The crusher has hydraulic adjustment and clearing systems to control the discharge opening size and remove tramp iron. Detailed diagrams and tables show component weights, installation dimensions, and the steps for installing parts like the frame, drive shaft, pulley, eccentric sleeve, and bushing. Maintaining proper alignment and clearances during installation is emphasized.
This series crusher is a crushing machine researched and manufactured by our company for coarse crushing. The roll crusher is widely used for crushing high hard and medium hard materials in such industrial departments such as metallurgy, building material and refractory. It has the features of low noise, little powder dust, reliable performance and convenient maintenance.
External Sleeve trims are used in high erosive and high pressure drop service. External Sleeve Choke is often used for control flow in severe condition instead of traditional needle adjustable choke, which is designed and manufactured.
Disc Type Choke, Disc Type Choke Valve - WOM Groupwomgroup
WOM disc type choke is a robust design that guarantees excellent controllability and protection of the sealing surfaces against erosive media. The disc type valve uses two Tungsten Carbide discs with holes of specific geometry.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help alleviate symptoms of mental illness and boost overall mental well-being.
Shanghai Joyal Mining Machinery Co., Ltd is a Chinese company that specializes in manufacturing mining equipment such as crushers and grinding mills. It has a full production line and conducts R&D, manufacturing, sales, and service. The company's products include jaw crushers, cone crushers, impact crushers, sand makers, and grinding equipment that are used in mining, construction, chemicals, and other industries. Shanghai Joyal aims to provide high quality products at affordable prices along with technical support to customers.
This document describes the ZYS High-Efficient Cone Crusher produced by Shanghai Joyal Mining Machinery Co., Ltd. It states that the cone crusher can crush materials with medium and high hardness like metal ore, basalt, granite, and limestone. It has features like excellent tramp release system, unique hydraulic lifting system, and high crusher throw that ensure high performance for secondary, tertiary and quaternary applications. The document provides details on the components, working principle, specifications, and advantages of the ZYS High-Efficient Cone Crusher.
The document describes the ZYC High-Efficiency Cone Crusher manufactured by Shanghai Joyal Mining Machinery Co., Ltd. ZYC cone crushers can be used to crush materials like iron ore, limestone, and granite. The crushers feature improvements like a more convenient adjusting device and optimized cavity design. They have a simple design and various safety features. The document provides specifications, gradation curves, and a structure drawing for the ZYC cone crushers.
The document describes a VSI sand making machine manufactured by Shanghai Joyal Mining Machinery Co. It summarizes that the machine is highly efficient and uses Germany technology to produce sand and reshape stones. It lists key features such as automatic shutoff if no oil, easy maintenance, branded bearings, and vibrating alarms. Models range in capacity from 120-520 tons/hour and include technical specifications. Diagrams show the machine's structure and components.
The document describes a three-ring micro powder mill made by Shanghai Joyal Mining Machinery Co. It consists of three main parts: grinding, features, and specifications. The mill is used to grind hard materials into a fine powder 325-2500 mesh in size. It has high efficiency and low energy consumption. Key components like grinding rings and rolls can last over one year. Operation and maintenance instructions are provided, such as lubrication schedules and proper start-up and shut-down procedures.
This document provides information about vibrating screens and crushing plants. It describes the working principle and features of vibrating screens, which use vibration to separate materials by size. Crushing plants are also summarized, including their standard equipment and processes that involve feeding, crushing, and screening materials in a closed circuit. Technical specifications are given for various vibrating screen models.
The document discusses Raymond mill, which is used to grind non-flammable materials with hardness under 7 on the Mohs scale and humidity under 6% in fields like building materials and mining. It can produce powders from 30 to 325 mesh. The mill uses a grinding ring and rollers to grind materials into powder and features a compact design and high powder passing ratio. It is produced by Shanghai Joyal Mining Machinery Co. in sizes ranging from a 3R1410 mill to a 4R3216 mill.
The document discusses hydraulic impact crushers made by Joyal Crusher. It describes key features such as a heavy-duty rotor design, interchangeable wearing parts, easy maintenance, and flexible application for primary or secondary crushing. It provides technical specifications and diagrams for several PFW series models including the PFW 1210III, PFW 1214III, and PFW 1318III. The crushers can be used for coarse or fine crushing and provide customers with low costs and outstanding performance.
The document describes a three-ring micro powder mill manufactured by Shanghai Joyal Mining Machinery Co. It consists of a main frame, reducer, classifier, blower, feeder and other components. The mill can grind materials into a fine powder size of 325-2500 meshes. It has high efficiency and low energy consumption. Maintenance of the mill includes lubricating parts like the central shaft and grind rollers with calcium based grease on a regular schedule. The document provides specifications of models ZYM80 and ZYM110 and instructions for safe start-up and shutdown of the system.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against developing mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
The document provides information about a jaw crusher manufactured by Shanghai Joyal Mining Machinery Co., Ltd. It describes the various models of jaw crushers they produce ranging in size from 250x400 mm to 1200x1500 mm. It also provides details on the working principle, specifications, structure, applications, installation and maintenance of the jaw crushers. Potential problems that may occur and their solutions are listed as well.
The document describes a high-pressure suspension mill by Shanghai Joyal Mining Machinery Co., Ltd. It can grind mineral materials into powder. The mill uses a central shaft and grinding rollers to pulverize materials in the grinding chamber. Materials are then classified and separated, with fine particles collected and coarse particles reground. The whole system includes components that feed, crush, grind, classify, collect and transport materials throughout the process. It produces a uniform powder size and meets dust emission standards.
The document summarizes information about the European-Type Hammer Crusher manufactured by Shanghai Joyal Mining Machinery Co., Ltd. It describes the crusher's applications in mining and other industries for secondary and fine crushing of materials with compressive strengths under 320 MPa. It provides details on the crusher's features such as high capacity, crushing ratio, and structure. Technical specifications are given for three models including dimensions, rotor speed, feeding size, discharge size, and motor power. The working principle is also explained.
The ball mill is a key piece of equipment used for regrinding in various industries. It can grind materials using either a wet or dry process. The ball mill works by rotating a hollow cylinder with steel balls inside. Materials are introduced and the steel balls cause grinding and impact through the centrifugal force created by the rotation of the cylinder. Ground materials are discharged through discharge ports at the end. Ball mills come in various sizes to produce powders from different materials for uses in industries like mining, cement, ceramics, and chemicals.
The ball mill is a key piece of equipment used for regrinding in various industries. It can grind materials using either a wet or dry process. The ball mill works by rotating a hollow cylinder with steel balls inside. Materials are introduced and the steel balls cause grinding and impact through the centrifugal force created by the rotation of the cylinder. Ground materials are discharged through discharge ports at the end. Ball mills come in various sizes to produce powder from different materials for uses such as building materials, chemicals, and metals.
The document describes a high-pressure suspension mill machine that is used to grind and process mineral materials. It can grind materials with a Mohs hardness of less than 9.3 and humidity of less than 6% into powder. The mill increases output by 10% compared to other models and can grind materials into powder between 0.613mm and 0.033mm in size. It works by using a central shaft, grinding rollers, and grinding ring to pulverize materials, which are then classified and collected in a cyclone collector to be discharged.
Shanghai Joyal Mining Machinery Co., Ltd is a Chinese company that specializes in manufacturing mining equipment such as stone crushers and grinding mills. The company has a full production line located in Shanghai with laboratories for testing and controlling product quality. Shanghai Joyal produces jaw crushers, cone crushers, impact crushers, and other equipment used in mining, construction, chemicals, and other industries. It aims to meet international market demands by adopting advanced foreign technologies and pursuing innovation and development.
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....Lacey Max
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
Cover Story - China's Investment Leader - Dr. Alyce SUmsthrill
In World Expo 2010 Shanghai – the most visited Expo in the World History
https://www.britannica.com/event/Expo-Shanghai-2010
China’s official organizer of the Expo, CCPIT (China Council for the Promotion of International Trade https://en.ccpit.org/) has chosen Dr. Alyce Su as the Cover Person with Cover Story, in the Expo’s official magazine distributed throughout the Expo, showcasing China’s New Generation of Leaders to the World.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
During the budget session of 2024-25, the finance minister, Nirmala Sitharaman, introduced the “solar Rooftop scheme,” also known as “PM Surya Ghar Muft Bijli Yojana.” It is a subsidy offered to those who wish to put up solar panels in their homes using domestic power systems. Additionally, adopting photovoltaic technology at home allows you to lower your monthly electricity expenses. Today in this blog we will talk all about what is the PM Surya Ghar Muft Bijli Yojana. How does it work? Who is eligible for this yojana and all the other things related to this scheme?
The Genesis of BriansClub.cm Famous Dark WEb PlatformSabaaSudozai
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Call8328958814 satta matka Kalyan result satta guessing➑➌➋➑➒➎➑➑➊➍
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
AI Transformation Playbook: Thinking AI-First for Your BusinessArijit Dutta
I dive into how businesses can stay competitive by integrating AI into their core processes. From identifying the right approach to building collaborative teams and recognizing common pitfalls, this guide has got you covered. AI transformation is a journey, and this playbook is here to help you navigate it successfully.
Discover the Beauty and Functionality of The Expert Remodeling Serviceobriengroupinc04
Unlock your kitchen's true potential with expert remodeling services from O'Brien Group Inc. Transform your space into a functional, modern, and luxurious haven with their experienced professionals. From layout reconfiguration to high-end upgrades, they deliver stunning results tailored to your style and needs. Visit obriengroupinc.com to elevate your kitchen's beauty and functionality today.
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...BBPMedia1
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
2. >> E-Mail:joyal@crusherinc.com
ZYS
● Profile
>> Http://www.joyalcrusher.com
Shanghai Joyal Mining Machinery Co., Ltd
High-Efficient Cone Crusher
The JOYAL ZYS High-Efficient Cone Crusher is a high-performance models
optimized and improved on the basis of ZYS High-Efficient Cone Crusher.The ZYS
High-Efficient Cone Crusher is widely used for secondary and fine crushing in the
fields of mining, building materials, metallurgies and so on. The ZYS High-Efficient
Cone Crusher can crush materials with middle and high hardness, such as, metal
ore, basalt, granite, limestone, cobblestone, sandstone and so on.
3. ZYS High-Efficient Cone Crusher
For higher productivity, better reliability and flexibility, long service life,
and better final product quality, the ZYS High-Efficient Cone Crusher
is absolutely your best choice.
----------------------------------------------------------------ZYS High-Efficient Cone Crusher offer several outstanding features
such as excellent tramp release system, unique hydraulic lifting
system, high crusher throw and reasonable cavity design, all of these
features ensure the Symons type cone crusher can offer the
unbeatable performance in secondary, tertiary and quaternary
applications.
----------------------------------------------------------------If your aggregate or mining business demands the 24-hours running,
high-reduction, big capacity application, you will find the ZYS
High-Efficient Cone Crusher optimized for your demands.
----------------------------------------------------------------The innovations like the stable lubrication, excellent sealing feature,
great abrasive material applied in key components and rugged
construction effectively reduce the wear rate , extend the replacement
period of the spare parts, evidently reduce the production cost in per
ton hour material processed. All of these can help you to achieve the
highest level of profitability.
Componets
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
4. Working Principle
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
Motor drives eccentric bushing to rotate via V-belts, pulley, shaft, pionion, gear.
Mantle rotates with eccentric bushing, so mantle goes near and far from the
concave, and crush stone into smaller size.
Typical flow chart
5. Features Of The ZYS Cone Crusher
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
1. High-performance
Combining optimal designing of chamber type with applying reasonable speed and stroke, to make this kind of machine does
more work with the same dynamic cone diameter. Therefo, this machine is of high-performance and manufactring capacity
compared with other cone crusher of the same type.
Use lminated crushing principle, to make more cubic shape materials and less needle-like materials.
........................................................................................................................................................................................................
2. Good products size composition
The crusher applys for laminated crushing principle to make cubic shapes of final products stand for larger proportion. Acicular
and flake shape products decrease and size fraction much more well-proportioned.
........................................................................................................................................................................................................
3. Good stability
If there is metal or other non-broken material come to the chamber, metal going through protection device will release it and
then reset automaticly. The protection device has fixed discharge opening returning point and the original discharge opening
can returing back immediately after the metal goes through the crushing chamber.
........................................................................................................................................................................................................
4. Convenient Cleaning-up
If the crusher stops under loading condition, hydralic cleaning system can clean up the crushing chamber quickly so that
decrease the downtime.
........................................................................................................................................................................................................
5. High reliability.
Adopting main shaft with big diameter,heavy main frame and separate automatic Control System of thin oil lubrication
system, so that it guarantees robustness and reliable operation of the crusher.
........................................................................................................................................................................................................
6. Easy maintenance and operation
All parts can be disassembled from top and the upper side, so that fixed cone and dynamic cone can be disassembled easily.
Under high shock and vibration environment, bronze Bearing can keep excellent bearing capacity and it is much more
economic and easy for maintenance.
........................................................................................................................................................................................................
7. Low production costs
Due for big capacity, high reliability and easy maintenance, the production costs has been recuded greatly.
........................................................................................................................................................................................................
8. Widespread use
The speciality of ZYS High-Efficient Cone Crusher is maximizing the performance to apply to all kinds of crushing process:
from special coarse crushing to fine crushing; from fixed crushing plant to mobile crushing plant.
ZYS High-Efficient Cone Crusher has different types of crushing chamber for choosing according to crushing process.
........................................................................................................................................................................................................
9. Separate Lubrication
6. Sketch of the cavity between standard and short head type
------------------------ >> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com -------------------------------------------------------------------------------------------------------------------------------------------
7. Main Specifications
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
Specification chart in open circuit (STANDARD)
Cavity
Recommend-ed
minimum
discharge
Feed opening with min.
Capacities in tons per hour passing
recom-mended discharge through the crusher at indicated discharge
setting A (mm)
setting A(mm)
Model
Opening Closed
Side "B" Side "B"
9
13
16
19
22
45
58
59
70
71
80
92
93
107 115 137 165
129 145 175 198
25
31
38
Power
(KW)
51
64
36"
( 3' )
Fine
9
Coarse
13
Extra Coarse 25
102
175
178
83
159
163
51"
( 4.25' )
Fine
Medium
Coarse
Extra Coarse
13
16
19
25
137
210
241
259
109
188
216
238
106 125 145 153 161 183
132 156 174 201 224 253 304
171 198 217 249 295 349
230 272 304 358 450
66"
( 5.5' )
Fine
Medium
Coarse
Extra Coarse
15
22
25
38
209
241
269
368
188
213
241
331
200 224 256 298 324
252 286 330 380 417 437
299 353 417 453 634
431 476 680
84"
( 7' )
Fine
Medium
Coarse
Extra Coarse
19
25
31
38
278
334
369
460
253
303
334
425
381 406 499 615 726
605 721 800
786 835
886
76
89
102
75
185
240
849 1028
994 1120 1284
400
1078 1250 1370 1450
1179 1354 1478 1525 1637
8. Main Specifications
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
Specification chart in open circuit (SHORT HEAD)
Cavity
Recommend-ed
minimum
discharge
Feed opening with min.
Capacities in tons per hour passing
recom-mended discharge through the crusher at indicated discharge
setting A (mm)
setting A(mm)
Model
Opening Closed
Side "B" Side "B"
3
5
6
10
67
68
72
13
16
19
25
Power
(KW)
29
32
36"
( 3' )
Fine
3
Coarse
3
Extra Coarse 6
41
60
76
13
33
51
27
28
40
41
53
54
58
51"
( 4.25' )
Fine
Medium
Coarse
Extra Coarse
3
6
8
16
64
89
105
133
29
54
70
98
36
57
83 102 134 160
84 104 136 164
110 157 180 202
209
224
236
Fine
Medium
Coarse
Extra Coarse
5
6
10
13
70
89
133
133
35
54
98
117
90
134 160 207
137 164 210 253 280
190 253 282 304
253 282 309
330
337
Fine
5
Medium
10
Coarse
13
Extra Coarse 16
105
133
178
203
51
95
127
152
189 271 340 361 404 470 509
352 408 450 509 558 617
450 481 542 596 661 687
505 592 650 684 693
38
66"
( 5.5' )
84"
( 7' )
91
92 100
93 112 127
75
155
240
400
727
11. Main Specifications
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
Machinery dimension(mm)
The model of crusher
36"
51"
66"
84"
Crusher centerline to mainframe flange
A
850
1000
1440
1650
Crusher centerline to countershaft housing face
B
880
1130
1400
1780
Crusher centerline to the end of countershaft
C
1870
2040
2450
2980
Main frame base to the bottom of main frame cap D
455
630
810
1030
Max diameter of adjustment ring
E
2000
2500
3280
4270
Main frame cap diameter
F
550
690
810
920
Main frame base to the top of adjustment ring
G
1100
1300
1550
1960
Main frame base to the top of feed hopper
H
1720
2300
2690
3300
Location measure of anchor screw
J
660
880
1130
1245
Height required to disassembly the machine
2800
3600
4200
5400
Overall dimension
2865x2000x2190
3300x2500x2940 4105x3280x3505
5110x4270x4350
Weight list(kg)
Model of crusher
36"
51"
66"
84"
Standard Short head Standard Short head Standard Short head Standard Short head
Crusher complete
9980
10530
22460
22590
43270
43870
67360
70130
Bowl,Bowl liner,Adjustment cap
1820
2040
4900
4350
10250
9160
14830
14330
Head,Main shaft,Mantle,Feed plate
1680
2000
3630
4310
7580
9250
13970
17240
Main frame
2630
5490
11430
18140
Adjustment ring, Spring
2130
5490
8260
10800
Coutershaft box,Countershaft,Crusher sheave
910
1270
2130
3180
Eccentric
540
1050
1910
3450
13. Crushing Plant
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
■■■
The JOYAL Crushing plant includes
vibrating feeder, jaw crusher, impact crusher or cone crusher, vibrating
screen, belt conveyor and centrally electric controlling system, etc.
The designed capacity is from 40t/h to 600t/h.
To meet customer’s specific requirement for the stone crushing, we can
also add other equipments such as cone crusher, dust catcher on the
crushing plant.
14. Process of Crushing Plant
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
The Big materials are fed to the jaw crusher evenly and gradually by vibrating feeder through a hopper for the
primary crushing.
After first crushing, the material will transferred to impact crusher or cone crusher by belt conveyor for
secondary crush; the crushed materials will then transferred to vibrating screen for separating.
After being separated, the parts that can meet standard will be taken away as final products, while the other
parts will be returned to impact crusher, thus forming a closed circuit.
Size of final products can be combined and graded according to customer’s specific requirement. We can also
equip dust catcher system to protect environment.
15. Lubrication
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
■ The Lubricating System
..................................................................................................................................................................
Since the friction surface receives much pressure, lubrication is very important to the crusher. The crusher is
centrally lubricated with watery oil.
Oil route
There are two routes for the oil to enter the machine,
>>
one is through the oil hole at the bottom of the crusher, then to the hollow eccentric shaft surface,
bowl-shaped bearing and the big and small gears through 3 separate ways.
>>
The other is through the hole in the transmission shaft support, then to the transmission bearing. The return
route is a spill hole at the bottom of the small bevel gear and another spill hole in the dust-proof cover.
16. Adjustment and locking of hydraulic system
>> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
Start thin oil station before start the main unit, if the lubrication system is ok, start the main
unit, then start the vibrating feeder if the machine running normal without load. Stop
feeding before stop crusher, ores in crushing chamber is exhausted totally, stop the main
unit, and stop the thin oil station at last.
Before start the thin oil station, open relative oil valve and switch, adjust the pressure
adjust device, keep the pressure between 0.04-0.1MPa, the oil temperature should be in
30-40℃, if the temperature is too low, start the resistance heater first.
Please refer to the electricity control cabinet instruction for all electric switch function. And
put them in proper position before start the main unit.
17. >> E-Mail:joyal@crusherinc.com
>> Http://www.joyalcrusher.com
Problem and solution
Trouble
Cause
1. oil flow indicator shows no flow.
1. low oil temperature
1. heat oil
Oil pump running but oil
2. oil path switch is not start properly
2. check oil path switch
pressure less than 0.04Mpa
3. oil pump not good
3. overhaul or change oil pump
2. too much pressure difference
Block in filter
Clean the filter when pressure
between filter forwards and backwards
3. oil pressure and oil
difference surpass 0.05MPa
Oil pipe or oil path block
temperature increase
4. oil temperature surpass 60℃
Trouble shooting
Stop the machine and find
out the block point and remove
Problem in rolling rubbing parts
but oil pressure not increases
Stop the machine and check ball tile,
bushing, thrust mat,
find out the causes and remove
5. oil level decreases
1. leak machine bottom end cap
1,2 stop the machine and
2. leak in transmission shaft flange
fix bolt or change mat
3. block in bowl baring
3. stop the machine, check and clean
base or oil return tunnel
the oil path and tunnel, adjust oil level and
remove the the problem
6. water enter oil, oil level increases
1. water pressure bigger
1. adjust the water pressure lower
oil pressure cooler
than oil pressure
2. leak water in cooler
2. check the leak parts
3. too much water in water seal
3. adjust water amount
4. block in water return pipe
4. clean the water return pipe
, oil tank, change new oil
7. oil in water seal, oil
Oil tunnel block
Clean oil tank and oil return pipe
temperature not increases
8. crusher vibrates strongly
1. Oil lack or dust in oil between
Too fast cone rotation
main unit and bushing
Stop the machine, check the
2. bowl tile damaged
causes and do the needful
3. not enough gap between
cone bushing
9. frequent vibrating during
1. not enough pressure in spring
machine working
2. fine and sticky material feed
3. uneven or too much feeding
1. tighten nut in spring or change the spring
2,3. feed properly
10. crushing chamber moves up with Uncrushed material falls into
Remove iron before feeding,
strong noise then work normally
use metal detector
crushing chamber, which will
cause main shaft broken