The document describes the ZYC High-Efficiency Cone Crusher manufactured by Shanghai Joyal Mining Machinery Co., Ltd. ZYC cone crushers can be used to crush materials like iron ore, limestone, and granite. The crushers feature improvements like a more convenient adjusting device and optimized cavity design. They have a simple design and various safety features. The document provides specifications, gradation curves, and a structure drawing for the ZYC cone crushers.
Jt 0.5 t travelling nut screw jack shaft, 0.5 ton jack screw length,500 kg synchronized screw jack,5kn screw jack roller bearings,1000lb screw jack housing casting static lifting force 500 kg, dynamic lifting force 300 kg. lifting screw (spindle) Tr20x5. high speed gear ratio 1/5, medium speed gear ratio 1/10, low speed gear ratio 1/20. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 100 mm stroke without guidances, 200 mm stroke with guidances. when tension load, 700 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 15 t load lifting screw jacks,15 ton locking screw jack,15 tonnes jackscrew and self locking,150kn self locking gear jack,15000kg self locking jack, 30000lbs machine screw lift static lifting force 15000 kg, dynamic lifting force 6400 kg. lifting screw (spindle) Tr50x8. high speed gear ratio 1/8, medium speed gear ratio 1/16, low speed gear ratio 1/32. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 500 mm stroke without guidances, 1000 mm stroke with guidances. when tension load, 2500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 20 t amce screw lift,20 ton screw lift elevator,20 tonnes lead screw lift,200kn screw lift mechanism,20000kg worm gear screw lifter,40000lb screw jack hoist,3000 mm stroke hoist lift jack static lifting force 20000 kg, dynamic lifting force 8400 kg. lifting screw (spindle) Tr64x10. high speed gear ratio 1/10, medium speed gear ratio 1/20, low speed gear ratio 1/40. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 600 mm stroke without guidances, 1200 mm stroke with guidances. when tension load, 3000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 100 t screw jack threaded rod,100 ton screw jack torque calculation,100 tonnes screw jack thread type,1000kn screw jack actuator,100000kg linear actuator jack,actuator jack screw, linear actuator screw jack static lifting force 100000 kg, dynamic lifting force 26000 kg. lifting screw (spindle) Tr100x16. high speed gear ratio 1/8, medium speed gear ratio 1/16, low speed gear ratio 1/32. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 900 mm stroke without guidances, 1800 mm stroke with guidances. when tension load, 4500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 40 t screw jack efficiency, 40 ton screw jack engineering drawing, 40 tonnes screw jack force calculation, 400 kn screw jack grease,40000kg screw jack gear ratio,80000lbs screw jack worm gear
China guomao zsy series industrial gearboxes manufacturerLance Shi NER GROUP
Gearbox Repair and Service | Marine and Industry Gearboxes China ZDY\ZLY\ZSY\ZFY Series gearbox catalog of Zsy Series Hard Tooth ... Application: Motor, Machinery, Marine, Agricultural Machinery, Industrial Machinery. Manufacturer of China famous brand ZSY series gear reduction boxes, industrial gearboxes, geared motor supplier, industrial gear reducer Vendor, gear
Jt 30 t screw geared hoist,30 ton screw jack assembly drawing,30 tonnes screw jack autocad drawing,300kn screw jack bellows boot,30000kg screw jack cad drawing static lifting force 30000 kg, dynamic lifting force 9600 kg. lifting screw (spindle) Tr75x12. high speed gear ratio 1/12, medium speed gear ratio 1/18, low speed gear ratio 1/36. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 750 mm stroke without guidances, 1500 mm stroke with guidances. when tension load, 3500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 2 t anti backlash screw jack,2 ton lifting gear box,20 kn actuator lift,2000kg lifting jacks,2 tonnes lifting jacks screw,4000lb screw jack actuator, jack lift, bearing for screw jacks static lifting force 2000 kg, dynamic lifting force 1350 kg. lifting screw (spindle) Tr25x5. high speed gear ratio 1/5, medium speed gear ratio 1/10, low speed gear ratio 1/20. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 200 mm stroke without guidances, 400 mm stroke with guidances. when tension load, 1200 mm stroke. single screw jack or multiple screw jacks system arrangements
Jt 0.5 t travelling nut screw jack shaft, 0.5 ton jack screw length,500 kg synchronized screw jack,5kn screw jack roller bearings,1000lb screw jack housing casting static lifting force 500 kg, dynamic lifting force 300 kg. lifting screw (spindle) Tr20x5. high speed gear ratio 1/5, medium speed gear ratio 1/10, low speed gear ratio 1/20. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 100 mm stroke without guidances, 200 mm stroke with guidances. when tension load, 700 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 15 t load lifting screw jacks,15 ton locking screw jack,15 tonnes jackscrew and self locking,150kn self locking gear jack,15000kg self locking jack, 30000lbs machine screw lift static lifting force 15000 kg, dynamic lifting force 6400 kg. lifting screw (spindle) Tr50x8. high speed gear ratio 1/8, medium speed gear ratio 1/16, low speed gear ratio 1/32. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 500 mm stroke without guidances, 1000 mm stroke with guidances. when tension load, 2500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 20 t amce screw lift,20 ton screw lift elevator,20 tonnes lead screw lift,200kn screw lift mechanism,20000kg worm gear screw lifter,40000lb screw jack hoist,3000 mm stroke hoist lift jack static lifting force 20000 kg, dynamic lifting force 8400 kg. lifting screw (spindle) Tr64x10. high speed gear ratio 1/10, medium speed gear ratio 1/20, low speed gear ratio 1/40. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 600 mm stroke without guidances, 1200 mm stroke with guidances. when tension load, 3000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 100 t screw jack threaded rod,100 ton screw jack torque calculation,100 tonnes screw jack thread type,1000kn screw jack actuator,100000kg linear actuator jack,actuator jack screw, linear actuator screw jack static lifting force 100000 kg, dynamic lifting force 26000 kg. lifting screw (spindle) Tr100x16. high speed gear ratio 1/8, medium speed gear ratio 1/16, low speed gear ratio 1/32. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 900 mm stroke without guidances, 1800 mm stroke with guidances. when tension load, 4500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 40 t screw jack efficiency, 40 ton screw jack engineering drawing, 40 tonnes screw jack force calculation, 400 kn screw jack grease,40000kg screw jack gear ratio,80000lbs screw jack worm gear
China guomao zsy series industrial gearboxes manufacturerLance Shi NER GROUP
Gearbox Repair and Service | Marine and Industry Gearboxes China ZDY\ZLY\ZSY\ZFY Series gearbox catalog of Zsy Series Hard Tooth ... Application: Motor, Machinery, Marine, Agricultural Machinery, Industrial Machinery. Manufacturer of China famous brand ZSY series gear reduction boxes, industrial gearboxes, geared motor supplier, industrial gear reducer Vendor, gear
Jt 30 t screw geared hoist,30 ton screw jack assembly drawing,30 tonnes screw jack autocad drawing,300kn screw jack bellows boot,30000kg screw jack cad drawing static lifting force 30000 kg, dynamic lifting force 9600 kg. lifting screw (spindle) Tr75x12. high speed gear ratio 1/12, medium speed gear ratio 1/18, low speed gear ratio 1/36. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 750 mm stroke without guidances, 1500 mm stroke with guidances. when tension load, 3500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 2 t anti backlash screw jack,2 ton lifting gear box,20 kn actuator lift,2000kg lifting jacks,2 tonnes lifting jacks screw,4000lb screw jack actuator, jack lift, bearing for screw jacks static lifting force 2000 kg, dynamic lifting force 1350 kg. lifting screw (spindle) Tr25x5. high speed gear ratio 1/5, medium speed gear ratio 1/10, low speed gear ratio 1/20. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 200 mm stroke without guidances, 400 mm stroke with guidances. when tension load, 1200 mm stroke. single screw jack or multiple screw jacks system arrangements
Jt 50 t screw jack instruction manual,50 ton keyed screw jack,500kn screw jack load calculation, 50 tonnes screw jack load capacity,50000kg screw jack mechanism,100000lbs jack screw acme nut static lifting force 50000 kg, dynamic lifting force 11000 kg. lifting screw (spindle) Tr90x14. high speed gear ratio 1/7, medium speed gear ratio 1/14, low speed gear ratio 1/28. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 850 mm stroke without guidances, 1700 mm stroke with guidances. when tension load, 4000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 3 t jack lifting,3 ton mechanical lifter,30kn mechanical jack,3tonnes mechanical screw jack,3000kg screw jacks with trapezoid,6000lb jack screw lift,12 inch screw jack static lifting force 3000 kg, dynamic lifting force 2000 kg. lifting screw (spindle) Tr32x6. high speed gear ratio 1/6, medium speed gear ratio 1/12, low speed gear ratio 1/24. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 250 mm stroke without guidances, 500 mm stroke with guidances. when tension load, 1500 mm stroke. single screw jack or multiple screw jacks system arrangements.
SEW-SNXR Series Ring Frame Cross Shaft Pneumatic Power Press. Its a hybrid design of C-Frame and H Frame Power Press gives more rigidity and economical.
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high capacity machine screw actuators features:
1. Lifting Force 250kN. Under max. lifting force, drive torque high speed 200.36Nm, low speed 67.32Nm.
2. Acme screw diameter 80 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 3 cubic screw jack, Germany PFAFF MERKUR M6 cubic screw jack and GROB BJ3 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical gear jack,long stroke linear screw drive actuator features:
1. Lifting Force 350kN. Under max. lifting force, drive torque high speed 325.51Nm, low speed 107.46Nm.
2. Acme screw diameter 100 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 4500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 4 cubic screw jack, Germany PFAFF MERKUR M7 cubic screw jack and GROB BJ4 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
20 ton screw jack,jtc200 model worm gear screw jack load 200kn,20 tonnes machine screw actuators dimensions,drawing,design,assembly,formula,calculation features:
1. Lifting Force 200kN. Under max. lifting force, drive torque high speed 146Nm, low speed 47.75Nm.
2. Acme screw diameter 70 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3000mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 2 cubic screw jack, Germany INKOMA HSG-200 cubic screw jack, PFAFF MERKUR M6 cubic screw jack and GROB BJ2 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
The Spherical Rubber Bearingst product catalogue from GMT Rubber-Metal Technology. This product brochure features technical specifications and diagrams of a wide range of Spherical Rubber Bearings available within the GMT range.
Jt 50 t screw jack instruction manual,50 ton keyed screw jack,500kn screw jack load calculation, 50 tonnes screw jack load capacity,50000kg screw jack mechanism,100000lbs jack screw acme nut static lifting force 50000 kg, dynamic lifting force 11000 kg. lifting screw (spindle) Tr90x14. high speed gear ratio 1/7, medium speed gear ratio 1/14, low speed gear ratio 1/28. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 850 mm stroke without guidances, 1700 mm stroke with guidances. when tension load, 4000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 3 t jack lifting,3 ton mechanical lifter,30kn mechanical jack,3tonnes mechanical screw jack,3000kg screw jacks with trapezoid,6000lb jack screw lift,12 inch screw jack static lifting force 3000 kg, dynamic lifting force 2000 kg. lifting screw (spindle) Tr32x6. high speed gear ratio 1/6, medium speed gear ratio 1/12, low speed gear ratio 1/24. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 250 mm stroke without guidances, 500 mm stroke with guidances. when tension load, 1500 mm stroke. single screw jack or multiple screw jacks system arrangements.
SEW-SNXR Series Ring Frame Cross Shaft Pneumatic Power Press. Its a hybrid design of C-Frame and H Frame Power Press gives more rigidity and economical.
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high capacity machine screw actuators features:
1. Lifting Force 250kN. Under max. lifting force, drive torque high speed 200.36Nm, low speed 67.32Nm.
2. Acme screw diameter 80 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 3 cubic screw jack, Germany PFAFF MERKUR M6 cubic screw jack and GROB BJ3 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical gear jack,long stroke linear screw drive actuator features:
1. Lifting Force 350kN. Under max. lifting force, drive torque high speed 325.51Nm, low speed 107.46Nm.
2. Acme screw diameter 100 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 4500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 4 cubic screw jack, Germany PFAFF MERKUR M7 cubic screw jack and GROB BJ4 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
20 ton screw jack,jtc200 model worm gear screw jack load 200kn,20 tonnes machine screw actuators dimensions,drawing,design,assembly,formula,calculation features:
1. Lifting Force 200kN. Under max. lifting force, drive torque high speed 146Nm, low speed 47.75Nm.
2. Acme screw diameter 70 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3000mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 2 cubic screw jack, Germany INKOMA HSG-200 cubic screw jack, PFAFF MERKUR M6 cubic screw jack and GROB BJ2 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
The Spherical Rubber Bearingst product catalogue from GMT Rubber-Metal Technology. This product brochure features technical specifications and diagrams of a wide range of Spherical Rubber Bearings available within the GMT range.
(https://www.indiamart.com/srikrishna-enterprises) We are one of the leading organizations engaged in manufacturing and exporting of Automotive Parts, Automotive Components, Automotive Valves. Our main business is parts for replacement market for Volvo, Mercedes, Scania, Tatra.
Forklift Block Clamp can efficiently handle various types of solid,regular cubic goods under normal temperature. Widely used in construction material,metallurgy industries for handling concrete blocks,cement bricks, carbon cubes,etc. The high structural strength and durability ensure the safe, productive application and long service life.
The Hammer Crusher is widely used in the industries of mining, building materials, chemical industry, metallurgies and fodder. The Hammer Crusher is applicable for secondary and fine crushing of materials with middle or middle minus hardness such as barite, limestone, terrazzo, silicasandstone, coal, coke, gypsum, aluminum sulfate, slag, etc.
Features of Oriental Hammer Crusher
● simple to operate;
● high capacity;
● low investment.
DIC TOOLS provides a complete range of HSS Cutting Tools, including End Mills, Miling Cutters, Reamers, Drills, and Slitting Saws, other tools are also available per customer requirements. HSS cutting tools have a long life due to their excellent hardness and toughness, and they consume less power when compared to other cutting tools. For more Information at website:info@dictoolsindia.com
Kuvam Technologies Angle Head for VMC is fixed with a 90° spindle angle combining vertical & horizontal operation on a single machine. They basically boost productivity with easily changing angle of the cutter while using the original workpiece setup. Also, the best way to improve overall accuracy & eliminates potential error created by multiple setups.
TorcStark® is a professional manufacturer and supplier of hydraulic equipment. Mainly produce hydraulic torque wrenches, hydraulic bolt tensioners, hydraulic torque/tensioner pumps and other products.
Trituradora de material mineral primario de carbónjoyalcrusher
Stationay trituradora de mandíbula es una buena opción como carbón trituradora de mandíbulas primaria de grueso y medio de trituración, lo que es más, la trituradora de mandíbula móvil es un buen equipo de trituración primaria, es ampliamente utilizado en la minería, materiales, carretera, vía férrea y las industrias hidráulicas, etc construcción . mandíbula móvil de trituración http://joyaltrituradora.com/product/Mobile-Crushing-Plant.html y cribado de plantas puede ser terminado en un tiempo para producir el tamaño y la capacidad requerida. Para la minería del carbón, la máquina trituradora móvil de carbón es una excelente elección. Puede eliminar los obstáculos de los lugares y circunstancias de trituración, y ofrecen la máxima eficiencia y plantas de los proyectos de bajo coste para el cliente.
Trituradora de mandíbula http://joyaltrituradora.com/product/Jaw-Crusher.html es la trituradora de mineral primario de carbón triturado. Está diseñado para aplastar de manera eficiente todo, incluso más dura piedra y materiales reciclados. Los Joyal trituradoras de piedra http://joyaltrituradora.com/product/Crushing.html están diseñadas para el servicio de larga duración con un mantenimiento mínimo para duro, resistente, material abrasivo y de alta capacidad de sobrecarga.
Primay carbón trituradora de mandíbula
Joyal tiene muchos tipos de trituradoras de mineral http://joyaltrituradora.com/index.html para la venta, como la trituradora de mandíbula, trituradora de cono, trituradora de impacto, trituradora de martillos, trituradora móvil, trituradora de impacto vertical del eje y así sucesivamente. Carbón Primay trituradora de mandíbula fabricado por Joyal es trituradoras de clase premium debido a su diseño, así como a los materiales que se utilizan para producirlas, a fin de garantizar la máxima funcionalidad y fiabilidad posible, sin ningún compromiso. Cada modelo se prueba prácticamente para el estrés, tensión, choque, la deformación, la carga térmica, la vibración y el ruido en una amplia gama de condiciones de carga. El resultado es una fiabilidad excepcional.
¿Por qué elegir la trituradora de mandíbula como primaty carbón equipos de trituración
PE trituradora de mandíbula es adecuado para la trituración primaria y secundaria y se puede procesar la resistencia a la compresión de materia prima menos de 320Mpa. Además, la trituradora de mandíbula para el carbón tiene el diseño de la cavidad derecha para la cavidad es el corazón y el propósito principal de la trituradora de mandíbulas. La abertura de alimentación adecuado que racionar profundidad asegura el bloqueo mínimo y se elimina la altura necesaria de la trituradora. Los perfiles de los dientes y el espesor de la trituradora de mandíbula se trabajan y se combinan con las aleaciones de acero al manganeso adecuadas para maximizar el rendimiento y minimizar los costos de operación. La capacidad de producción de 10-1300t / h con el máximo de alimentación es de 1250mm. PE
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
3. Email:joyal@crusherinc.com
http://www.joyalcrusher.com
Features
ZYC cone crushers
improves the adjusting device,
the operation becomes more
convenient.
ZYC cone crushers on the basis of
absorbing foreign technology, based on
customer needs, based on the lamination
theory and a number of broken ground
breaking conceptual design developed by
a small set of high-frequency pendulum,
optimize stroke in the cavity and
reasonable one of the modern
high-performance cone crusher.
Simplicity of design and
rugged construction have
made Cone Crushers ideal for
crushing operations.
The spring-loaded release
system allows any
uncrushable material to pass
through without causing any
damage.
The lubrication unit is
interlocked with the main
motor for additional safety
as a standard equipment.
A rib liner is provided inside
the bottom section of the
frame to help protect it from
wear.
There are generally four
types of Series Cone
Crushers :
the SGC Standard or the coarse type, the
SGM fine or the medium type, the SGF
Short Head type &SGEF Super Fine
Type.
All the four types are designed for
secondary or tertiary crushing purposes
both in stationary and portable
applications for highly abrasive materials.
7. Email:joyal@crusherinc.com
http://www.joyalcrusher.com
Structure Drawing of
ZYC Cone Crusher
As shown in graph, fixed cone assembly is mainly composed of adjustment cap and bowl liner, movable cone assembly includes
main shaft, fixed cone, mantle and other components, transmission part mainly includes main pulley, drive shaft, a pinion gear,
ring gear and other components.
1
10
2
11
3
12
4
13
5
14
15
6
16
7
17
8
9
18
1.Nut cover
2.Main shaft
3.Bowl liner
4.Top cell
5.Mantle
6.Eccentric bush
7.Frame bush
8.Main frame
9.Hydraulic cylinder
10.Frame cap
11.Mantle core
12.Seat liner
13.Release spring
14.Ring gear
15.Pinion gear
16.Counter shaft
17.Main pulley
18.Countershaft frame