사용자의 편안함과 사용 편이성을 보장해 주는 지브라의 인체공학적 캡처 기능
사용이 간편한 모바일스캐너 CS3000 시리즈는 매우 직관적이고 단수한 2개의 버튼이 별도의 교육이 없어도 손쉽게 사용할 수 있습니다.
그 외에도, 손과 손가락이 가장 편안한 스캔 위치로 인도되도록 홈이 파여 있고 트리거 버튼이 연질 고무 재질로 만들어져 있어 대부분의 스캔 집약적 작업을 편안하게 처리할 수 있습니다.
동급 최고의 고성능 스캔
이 제품은 세계적으로 유명한 스캔 품질 및 신뢰성을 제공하는 지브라의 SE955 스캔 엔진을 내장하고 있습니다.
또한 광범위한 작동 범위가 지원되므로 어떠한 조명 조건 하에서든 접촉 지점에서부터 114.3cm/45in. 까지의 거리에서 바코드를 캡처할 수 있을 만큼 탁월한 애플리케이션 유연성이 보장됩니다. 아울러 손상되었거나 품질이 불량한 바코드까지도 캡처할 수 있을 정도로 성능이 뛰어날뿐 아니라 각 일괄 처리 스캔 작업마다 시간 스탬프를 자동적으로 첨부할 수 있는 비즈니스 인텔리전스 기능이 추가로 제공됩니다.
두 가지의 유연한 작동 모드 (일괄처리 및 실시간)를 이용해 작업순서를 자동화
일괄 처리 모드에서 이 포켓형 장치는 보안 요원과 경비 직원이 출입문 및 기타 장소의 바코드를 스캔하고 교대 시간 종료 시 시간 및 날짜 스탬프 데이터를 업로드하여 정확한 활동 종료 사실을 문서화할 수 있는 기능을 제공합니다. 또한 지브라 CS3000 시리즈는 제조업체 및 대리점이 고객에게 CS3000을 지급하고 사용 시점에 재고를 스캔하도록 함으로써 소비 현장과 연동하여 주문 프로세스를 효과적으로 자동화하는 등 기업 외부에서도 널리 활용됩니다.
유연한 모바일 1D 레이저 스캐너
두 가지 작동 모드를 지원하는 모바일 바코드 스캐너: 데이터를 호스트에 일괄 처리 방식으로 업로드하거나 스마트폰, PDA 및 랩탑에 대한 무선 블루투스 연결을 통해 호스트 애플리케이션으로 실시간 캡처 및 전송
긴 배터리 사용 시간
아울러 24시간 일괄 처리/12 시간 블루투스 모드 배터리 수명이 지원되므로 한 번 충전으로 일과 시간 내내 충분히 스캔 작업을 수행할 수 있습니다.
심플한 투 버튼 디자인
편안하고 손쉬운 사용: 거의 교육 없이 작동 가능
작고 가벼운 중량
포켓 또는 목 거치대에 딱 들어 맞는 작은 크기와 70g에 불과한 무게
호스트 장치와 손쉽게 통합
일괄 처리 USB 연결 또는 무선 블루투스 기능을 통해 거의 모든 호스트 장치와의 호환성을 지원
512MB 비휘발성 메모리
백만 건이 넘는 스캔 데이터를 저장할 수 있는 용량 및 확실한 데이터 보존성: 거의 모든 일괄 처리 작업에 매우 적합
탁월한 스캐닝 성능 손쉽고 직관적인 사용
가리키고 클릭하는 것만으로 스캔이 완료되며, 더럽거나 손상되었거나 품질이 불량한 바코드까지 손쉽게 캡처
기업용 수준의 내구성
1.2m/4ft. 낙하 사양, 0.5m/1.64ft 높이에서 250회 낙하(500회의 충격), IP40 봉합 떨어뜨리거나 부딪힐 수밖에 없는 실제 사용 환경에서 안정적인 작동을 보장
PHYSICAL SPECIFICATIONS
Dimensions : 3.41 in. L x 1.95 in. W x 0.87 in H 8.65 cm L x 4.95 cm W x 2.2 cm H
Weight (With batteries) : 2.45 ozs./70 gms
PERFORMANCE CHARACTERISTICS
Decode capability : 1-D
Interfaces supported : USB, USB 2.0 Host
Scan pattern : Single line
Memory : 512 MB Flash
USER ENVIRONMENT
Ambient lighting tolerance : Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED : 450 Ft Candles (4, 844 Lux) Sunlight: 8000 Ft Candles (86, 111 Lux)
Operating temperature : 32° to 104° F /0° to 40° C
Drop specifications : 4 ft./1.21 m drop to tiled linoleum over concrete, 6 drops per 6 sides, across the operating temperature range
Storage temperature : -40° to 158° F /-40° to 70°C
REGULATOR
Laser/LED safety : EN 60825-1, IEC 60825-1, 21CFR1040.10
Radio : EN 300 328
Environmental : RoHS Directive 2002/95/EEC
EMI/RFI : EN 301 489-1, EN 301 489-17, EN 55022, FCC Part 15 Class B, ICES 003 Class B, EN 55024
Electrical safety : UL 60950-1, C22.2 No. 60950-1, EN 60950-1, IEC 60950-1
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
Zebra의 산업용 PDA MC9500-K는 혁신적인 인체공학적 디자인과 기능을 결합하여 아무리 까다로운 현장에서도 모빌리티 애플리케이션을 지원함으로써 고급 러그드 모바일 컴퓨팅의 기대 수준을 높였으며, 지브라만의 혁신적인 이 기기는 외양만큼이나 내부도 다릅니다.
지브라 테크놀로지를 대표하는 MC9000 바코드 PDA 시리즈를 기반으로 한 MC9500-K 는 더 견고한 설계, 더 많은 데이터 캡처 옵션, 고객이 전환할 수 있는 WAN 서브 시스템과 키패드를 통한 진정한 WAN 기술 독립성 및 애플리케이션 유연성, 더 강력한 프로세싱 성능, 배터리 및 백룸 관리에 대한 획기적인 방식을 제공하면서도 더 가볍고 날렵하며 사용하기에 간편한 외관을 갖추고 있습니다.
차세대 인체공학적 디자인
지브라 산업용PDA MC9500-K의 작고 날렵하며 손에 쥐기 편한 외관은 새로운 차원의 편의성을 제공하며 키 기반 애플리케이션을 한 손으로 쉽게 조작할 수 있습니다. 고급 LCD 기술이 적용된 동급 최고의 디스플레이로 인해 어떤 조명 조건에서도 간편하게 볼 수 있습니다.
통신업체로부터의 진정한 독립을 가능케 하는 Zebra MAX FlexWAN
백룸에서 WAN 서브시스템을 원하는 대로 바꿀 수 있어 통신업체로부터의 진정한 독립을 가능케 하는 최초의 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능은 WAN을 채택하고 필요에 따라 셀룰러 네트워크를 변경할 수 있는 유연성을 제공함으로써 전체 작업자의 통신 범위를 최적화하고, 서로 다른 네트워크에서 재배포를 가능케하고, 라이프사이클을 연장하고, 기기 사용률을 개선합니다.
Zebra MAX 키패드
백룸에서 몇 분 내에 키패드를 바꿀 수 있는 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능을 통해 MC9500-K를 손쉽게 맞춤화할 수 있어, 기기를 간편하게 업그레이드하여 업데이트되거나 새로운 애플리케이션의 요구를 충족할 수 있습니다. 또한 키패드 교체를 위해 기기를 정비 센터에 반환할 필요가 없으므로 가동 시간이 개선됩니다.
PHYSICAL CHARACTERISTICE
Dimensions : 9.2 in. H x 3.5 in. W x 2 in. D (23.36 cm H x 8.89 cm W x 5.08 cm D)
Weight : 22 oz./623 g (including battery, stylus, keypad & strap)
Display : 3.7 in. VGA Color (TFT) Display (640 x 480) with touch panel and backlight
Keypad Options : Modular: alpha primary; numeric telephony, numeric calculator, alpha numeric
Expansion Slot : microSD slot - supports up to 32 GB
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA320 @ 806 MHz
Operating System : All models except MC959B: Windows Mobile 6.5
Memory : 256MB RAM/1GB Flash
BATTERY
Capacity : Rechargeable Lithium Ion 4800 mAh battery @ 3.7V – with State of Charge and State of Health indicators
Standby Time : 150 hours
Talk Time : 8 hours (minimum/suspend mode)
DATA CAPTURE
Scanning : 1D Scanner; 2D Imager; 3 MP auto-focus flashenabled digital color camera with symbology decode software
Scan Angle : Optimized for scanning (15° downward angle)
Options : Integrated Magnetic Stripe Reader (MSR) with encrypted head (optional)
COLOR CAMERA
Resolution : 3 megapixel
Illumination : User controllable flash
Lens : Autofocus
1D LASER SCANNER (SE950)
Range on 100% UCPA : 24 in./60 cm
Resolution : 4 Mil minimum element width
Roll : ±35° from vertical
Pitch Angle : ±65° from normal
Skew Tolerance : ±50° from normal
Ambient Light Immunity : LED: 450 Ft Candles (4,844 Lux), Sunlight: 8000 Ft Candles (86,111 Lux)
Scan Rate : 104 (±12) scans/sec (bi-directional)
Scan Angle : 47° ±3° default; 35° ±3° reduced
2D IMAGER (SE4500SR)
Focal Distance : From center of exit window: SR – 7.5 in./19 cm
Sensor Resolution : 752 x 480 pixels
Field of View Horizontal : 40°; Vertical: 25°
Skew Tolerance : ±60°
Pitch Tolerance : ±60°
Roll Tolerance : 360°
Ambient Light Immunity : 9,000 ft. candles/96,900 lux
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
견고한 지브라 MC67 산업용PDA 시리즈를 사용하여 보다 빠르고 스마트한 작업에 필요한 도구를 현장 근무자에게 제공하십시오.
작업자는 완벽한 기능을 갖춘 이 기기를 사용하여 백엔드 시스템의 정보에 액세스하고 조건에 관계없이 거의 모든 바코드를 스캔할 수 있으며 문서를 캡처하여 간편하게 기록을 보관할 수 있습니다. 또한 실시간 수리 지원을 위해 동영상과 사진을 촬영, 전송할 수 있으며 도착 창에서 고객에게 전화를 할 수 있습니다.
현장 업무에 최적화된 지브라의 MC67 바코드PDA는 보다 많은 작업, 예를들어 장비수리, 물품픽업 또는 배송, 주문접수, 건물 또는 레스토랑 점검, 고지서 발행 또는 경쟁 정보 수집 등을 수행하는 모바일 컴퓨터입니다.
MC67 Base 모델
비용 효과적인 라인 확장을 통한 현장 근무자의 생산성 향상
MC67 Base는 MC67 시리즈의 비용대비 효과적인 확장입니다.
튼튼한 보급형 플랫폼을 찾는 고객들에게 MC67 Base는 현장 근로자에게 생산성을 높일 수 있는 모든 기능을 제공하며 MC65 및 MC55 액세서리와 역호환이 될 뿐 아니라 MC67 프리미엄 버전으로 귀사 시스템에 액세스할 수 있도록 지원합니다.
Windows® Embedded Handheld 6.5가 실행되는 MC67 Base는 복잡한 애플리케이션, 유연한 고속 이동통신 및 Wi-Fi 무선 연결을 지원하고 거의 모든 유형의 데이터를 캡처할 수 있습니다.
결과는? 향상된 고객 서비스. 고객 만족도 제고. 고객 유지 가능성 증대.
MC67 Premium 모델
작업자가 작업을 수행하는 데 필요한 모든 기능 제공
MC67 Premium을 사용하는 경우 모빌리티 전략을 가장 효과적으로 지원하는 운영 체제(Windows® Embedded Handheld 6.5 또는 Android™ Jelly Bean 4.1)를 선택하여 다양한 비즈니스 시스템 정보에 빠르게 액세스함으로써 작업 효율성과 정확성을 향상시킬 수 있습니다.
수리가 필요한 장비를 촬영한 동영상 클립을 보내 내부 전문가 또는 장비 제조업체로부터 즉시 조언을 얻습니다.
고해상도 스냅 사진으로 상황을 기록, 바코드를 스캔하여 사용 중인 부품을 빠르고 정확하게 추적하며 중요 문서는 캡처합니다.
고객에게 전화를 걸어 도착 시간 창을 업데이트합니다. 이메일을 확인하고 답장을 보냅니다.
또한 현재 MC65를 사용하는 경우 대부분의 기존 MC55/MC65 액세서리와의 백워드 호환성에 따라 최신 모바일 컴퓨팅 기술로의 비용 효율적인 업그레이드가 가능합니다.
PHYSICAL CHARACTERISTICE
Dimensions : 6.38 in. L x 3.03 in. W x 1.32 in. D (162.2 mm L x 77 mm W x 33.5 mm D)
Weight : 13.5 oz./385 g (with rechargeable 3600mAh Lithium Ion battery)
Display : 3.5 in. color VGA display, touch, 640 x 480 portrait, 650+ NIT s
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh battery
Backup Battery : Ni-MH battery (rechargeable) 15mAh 3.6V nominal (not user-accessible or replaceable)
Expansion Slot : Micro SD card slot (supports up to 32GB)
Communication : Interface: USB 2.0 high speed (host and client)
PERFORMANCE CHARACTERISTICS
CPU : Dual core 1GHz OMAP 4 processor
Operating System : Microsoft® Embedded Handheld 6.5 Professional
Memory : 256 MB RAM/2 GB Flash
DATA CAPTURE
Options :
2D SE4500-SR imager
2D SE4500-SR imager + 8 MP Camera
2D SE4500-DL imager + 8 MP Camera
2D SE4500-DL imager
2D SE4500-DPM/HD + 8 MP camera
Data Types : 1D/2D bar codes, photographs, video, signatures and documents
WIRELESS VOICE AND DATA COMMUNICATIONS
WAN Radio : 4G HSPA+ Frequency band: UMTS/HSDPA and HSUP A - 850, 900, 1900 and 2100 MHz; GSM/EDGE: 850, 900, 1800 and 1900 MHz
WLAN : Push-to-talk (PTT ); VoIP -ready
INTEGRATED GPS
Integrated standalone and Assisted-GPS (A-GPS): SUPL 1.0
WIRELESS PAN AND DATA COMMUNICATIONS
Bluetooth Class II , v2.1 with Enhanced Data Rate (EDR)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC55A0-HC 2D 헬스케어PDA 의료용모바일컴퓨터 산업용PDA 바코드PDA 매뉴얼HION IT
지브라 MC55A0-HC 헬스케어 PDA는 차세대 의료 모빌리티를 위해 소독이 가능한 견고한 의료용 모바일 컴퓨터로 휴대하기 쉽고 사용하기 쉬우며 환자 모니터링이 간편한 산업용PDA입니다.
MC55A0-HC 헬스케어 바코드 PDA는 병원용으로 설계되어 있어 일상적인 낙하와 충돌을 견딜 뿐만 아니라 환자용으로 사용한 후 소독도 가능합니다. 또한 강력한 무선 애플리케이션 성능과 무선 네크워크 옵션을 통해 의료 서비스 제공자가 이동 중에 환자 기록 액세스를 통해 환자 모니터링에 집중하고, 약을 정확히 투여하며, 환자의 활력 징후를 관찰하고, 검사실과 조제실에 지시하며, 검사 결과를 열람하는 등의 일을 모두 몇 초만에 병원 내 어디에서든 할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.78 in. L x 3.03 in. W x 1.1 in. D (14.7 cm L x 7.7 cm W x 2.8 cm D)
Weight : 11.9 oz./338 g (including standard battery)
Display : PenTile® 3.5 in Color VGA, super bright 650+ NITS
Touch Panel : Glass analog resistive touch
Display : Backlight LED backlight
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh Smart Battery
Backup Battery : Ni-MH battery (rechargeable) 18mAh 2.4V (not user accessible)
Expansion Slot : microSD slot with SDHC Support (maximum 32GB)
Comm. Interface : USB 1.1 host and client
Keypad Options : QWERTY; Numeric
Audio : VoWLAN; support for Bluetooth headsets; handset and speaker phone modes
PERFORMANCE CHARACTERISTICS
CPU : Marvell™ PXA 320 @ 806 MHz processor
Operating System : Microsoft® Windows Mobile ® 6.5 Classic
Memory : 256MB RAM; 1GB Flash
USER ENVIRONMENT
Operating Temp. : 14° F to 122° F/-10° C to 50°C
Storage Temp. : -40° F to 158° F/-40° C to 70° C
Humidity : 95% non-condensing
Drop Specification : Multiple 6 ft./1.8 m drops per MIL-STD 810G specifications
Tumble Specification : 1,000 1.6 ft./0.5 m tumbles (2,000 hits)
Sealing : IP64 per IEC sealing specifications
Clock : ntegrated real time clock
Electrostatic Discharge (ESD) : 15KV Air; 8KV Touch
BATTERY PERFORMANCE
User Profiles Minimally 8 hours based on 600 scans and WLAN transmits per hour with display on and standard capacity battery
DATA CAPTURE OPTIONS
Options 2D SE4500-DL imager; 3.2 MP auto-focus flash-enabled digital color camera; captures 1D and 2D bar codes, color photographs and video, signatures and documents
REGULATORY
Electrical Safety : Certified to UL/cUL 60950-1, IEC/EN60950-1
Environmental : RoHS-compliant
WLAN and Bluetooth (PAN) : USA: FCC Part 15.247, 15.407 Canada: RSS-210, RSS 310 EU: EN 300 328, EN 300 440-2, EN 301 893 Japan: ARIB STD-T33, ARIB STD-T66, ARIB STD-T70 & T71 Australia: AS/NZS 4268
RF Exposure : USA: FCC Part 2, FCC OET Bulletin 65 Supplement C Canada: RSS-102 EU: EN 50392 Australia: Radiocommunications Standard 2003
EMI/RFI : North America: FCC Part 15, Class B Canada: ICES 003 Class B EU: EN55022 Class B, EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 60601-1-2
Laser Safety : IEC/Class 2/FDA ll in accordance with IEC60825-1 /EN 60825-1
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
중소규모의 기업 또는 신흥 시장에서, 그리고 현장 직원이 장비를 수리하거나 판매 장부를 기록 도중 또는 배송물을 반출하여 전달하는 모든 경우와 상황에서 각 직원들의 한 가지 공통점은 고객과 매일 접촉하는 당사자라는 점입니다. 직원들의 직무 수행 속도와 수행 능력은 수입, 고객 만족, 고객 보유력 및 노동비에 직접적인 영향을 미치게 됩니다.
지브라 MC45 산업용 PDA는 매출 손실을 방지하고 고객을 잃지 않으면서 직원에게 직무를 올바르게 수행하기 위해 필요한 실시간 정보를 적재적소에 제공할 수 있는 경제적인 방법입니다.
이를 통해 직원은 소비자가 원하는 세련된 소비자 스타일링과 간소화된 운용을 비롯하여 비즈니스에 필요한 기능, 내구성, 보안 및 관리성을 갖추게 됩니다.
진정한 현장 내구성
MC45 바코드 PDA는 현장에서 활용하도록 제작되었으며 직원이 온도 조절이 가능한 차량에서 실외로 이동할 때 자주 발생하는 낙하, 충돌, 유출, 먼지, 진동 및 열충격을 처리할 수 있습니다.
고급형 1D 스캔 기술
적응형 ScanTM 기술을 사용한 Zebra의 업계 선도 1D 스캔 엔진으로 스캔 집중적인 작업을 쉽게 수행할 수 있으며 광범위한 스캐닝 범위는 접촉점 근처에서 15피트/4.5m 떨어진 곳에 이르기까지 더러워졌거나 손상되었거나 인쇄 상태가 좋지 않은 바코드를 손쉽게 캡처할 수 있습니다.
더 많은 지역에서 GPS 서비스 지원
직원들은 번잡한 도시 지역, 숲이 무성한 지역 또는 건물 내부에서도 신뢰할 수 있는 GPS 액세스를 통해 실시간 방향 및 지오스탬프에 액세스하여 애플리케이션에 대한 정보를 자동으로 캡처할 수 있습니다.
'내외부' 무선 연결
도로나 사무실에서 직원들이 3.5G GSM HSDPA 휴대폰과 802.11a/b/g Wi-Fi에 계속 연결되어 있도록 합니다.
OS에 관계없이 사용 가능한 애플리케이션 지원(내장형)
RhoMobile 제품군에 대한 지원은 HTML5 기반 OS에 관계없이 사용 가능한 애플리케이션을 개발하게 되어 응용 프로그램 개발 시간 및 비용을 크게 절감하고 하나의 응용 프로그램을 운영 체제가 서로 다른 여러 장치에서 실행할 수 있게 되었습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.6 in. L x 2.6 in. W x 1.0 in. D (14.2 cm L x 6.6 cm W x 2.5 cm D)
Weight : 8.73 oz./247.4 g
Display : Outdoor-viewable 3.2 in. QVGA with backlight, 240 W x 320 L
Standard Battery : Rechargeable Lithium Ion 3.7V, 3080 mAh
Expansion Slot : User accessible 32 GB microSD slot with SDHC support Network
Connections : USB 2.0 High Speed (host and client), WLAN, WWAN and Bluetooth
PERFORMANCE CHARACTERISTICS
CPU : 600 MHz, ARM 11 processor, MSM 7627
Operating System : Microsoft® Windows Embedded Handheld™ 6.5.3 Professional Edition
Memory : 256 MB RAM / 1GB Flash
DATA CAPTURE OPTIONS
Camera : Autofocus 3.2 MP with user-controllable flash; supports integrated 1D/2D bar code capture
1D Laser Scanner : 1D* laser with Adaptive Scan technology
WIRELESS LAN VOICE AND DATA COMMUNICATIONS
Radio : Tri-mode IEEE ® 802.11a/b/g
Data Rates Supported :1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
Security : WPA2, WEP (40 or 128 bit), TKIP, TLS, TTLS (MSCHAP),TTLS (MS-CHAP v2), TTLS (CHAP), TTLSMD5, TTLS-PAP, PEAP-TLS, PEAP (MS-CHAP v2), AES, LEAP, CCXv4 certified; FIPS 140-2 certified
WIRELESS PAN VOICE AND DATA COMMUNICATIONS
Bluetooth : Class II , V2.0 with Enhanced Data Rate (EDR)
WIRELESS WAN DATA AND VOICE COMMUNICATIONS
Radio : 3.5G HSDPA, Quad-Band GPRS/EDGE
Frequency Band :
GSM : Quad Band : 850/900/1800/1900 MHz
UMTS/HSDPA : Americas: 850/1900 MHz
UMTS/HSDPA : Rest of the world: 2100 MHz
GPS Integrated, Autonomous and Assisted-GPS (A-GPS)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
Zebra의 산업용 PDA MC9500-K는 혁신적인 인체공학적 디자인과 기능을 결합하여 아무리 까다로운 현장에서도 모빌리티 애플리케이션을 지원함으로써 고급 러그드 모바일 컴퓨팅의 기대 수준을 높였으며, 지브라만의 혁신적인 이 기기는 외양만큼이나 내부도 다릅니다.
지브라 테크놀로지를 대표하는 MC9000 바코드 PDA 시리즈를 기반으로 한 MC9500-K 는 더 견고한 설계, 더 많은 데이터 캡처 옵션, 고객이 전환할 수 있는 WAN 서브 시스템과 키패드를 통한 진정한 WAN 기술 독립성 및 애플리케이션 유연성, 더 강력한 프로세싱 성능, 배터리 및 백룸 관리에 대한 획기적인 방식을 제공하면서도 더 가볍고 날렵하며 사용하기에 간편한 외관을 갖추고 있습니다.
차세대 인체공학적 디자인
지브라 산업용PDA MC9500-K의 작고 날렵하며 손에 쥐기 편한 외관은 새로운 차원의 편의성을 제공하며 키 기반 애플리케이션을 한 손으로 쉽게 조작할 수 있습니다. 고급 LCD 기술이 적용된 동급 최고의 디스플레이로 인해 어떤 조명 조건에서도 간편하게 볼 수 있습니다.
통신업체로부터의 진정한 독립을 가능케 하는 Zebra MAX FlexWAN
백룸에서 WAN 서브시스템을 원하는 대로 바꿀 수 있어 통신업체로부터의 진정한 독립을 가능케 하는 최초의 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능은 WAN을 채택하고 필요에 따라 셀룰러 네트워크를 변경할 수 있는 유연성을 제공함으로써 전체 작업자의 통신 범위를 최적화하고, 서로 다른 네트워크에서 재배포를 가능케하고, 라이프사이클을 연장하고, 기기 사용률을 개선합니다.
Zebra MAX 키패드
백룸에서 몇 분 내에 키패드를 바꿀 수 있는 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능을 통해 MC9500-K를 손쉽게 맞춤화할 수 있어, 기기를 간편하게 업그레이드하여 업데이트되거나 새로운 애플리케이션의 요구를 충족할 수 있습니다. 또한 키패드 교체를 위해 기기를 정비 센터에 반환할 필요가 없으므로 가동 시간이 개선됩니다.
PHYSICAL CHARACTERISTICE
Dimensions : 9.2 in. H x 3.5 in. W x 2 in. D (23.36 cm H x 8.89 cm W x 5.08 cm D)
Weight : 22 oz./623 g (including battery, stylus, keypad & strap)
Display : 3.7 in. VGA Color (TFT) Display (640 x 480) with touch panel and backlight
Keypad Options : Modular: alpha primary; numeric telephony, numeric calculator, alpha numeric
Expansion Slot : microSD slot - supports up to 32 GB
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA320 @ 806 MHz
Operating System : All models except MC959B: Windows Mobile 6.5
Memory : 256MB RAM/1GB Flash
BATTERY
Capacity : Rechargeable Lithium Ion 4800 mAh battery @ 3.7V – with State of Charge and State of Health indicators
Standby Time : 150 hours
Talk Time : 8 hours (minimum/suspend mode)
DATA CAPTURE
Scanning : 1D Scanner; 2D Imager; 3 MP auto-focus flashenabled digital color camera with symbology decode software
Scan Angle : Optimized for scanning (15° downward angle)
Options : Integrated Magnetic Stripe Reader (MSR) with encrypted head (optional)
COLOR CAMERA
Resolution : 3 megapixel
Illumination : User controllable flash
Lens : Autofocus
1D LASER SCANNER (SE950)
Range on 100% UCPA : 24 in./60 cm
Resolution : 4 Mil minimum element width
Roll : ±35° from vertical
Pitch Angle : ±65° from normal
Skew Tolerance : ±50° from normal
Ambient Light Immunity : LED: 450 Ft Candles (4,844 Lux), Sunlight: 8000 Ft Candles (86,111 Lux)
Scan Rate : 104 (±12) scans/sec (bi-directional)
Scan Angle : 47° ±3° default; 35° ±3° reduced
2D IMAGER (SE4500SR)
Focal Distance : From center of exit window: SR – 7.5 in./19 cm
Sensor Resolution : 752 x 480 pixels
Field of View Horizontal : 40°; Vertical: 25°
Skew Tolerance : ±60°
Pitch Tolerance : ±60°
Roll Tolerance : 360°
Ambient Light Immunity : 9,000 ft. candles/96,900 lux
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
견고한 지브라 MC67 산업용PDA 시리즈를 사용하여 보다 빠르고 스마트한 작업에 필요한 도구를 현장 근무자에게 제공하십시오.
작업자는 완벽한 기능을 갖춘 이 기기를 사용하여 백엔드 시스템의 정보에 액세스하고 조건에 관계없이 거의 모든 바코드를 스캔할 수 있으며 문서를 캡처하여 간편하게 기록을 보관할 수 있습니다. 또한 실시간 수리 지원을 위해 동영상과 사진을 촬영, 전송할 수 있으며 도착 창에서 고객에게 전화를 할 수 있습니다.
현장 업무에 최적화된 지브라의 MC67 바코드PDA는 보다 많은 작업, 예를들어 장비수리, 물품픽업 또는 배송, 주문접수, 건물 또는 레스토랑 점검, 고지서 발행 또는 경쟁 정보 수집 등을 수행하는 모바일 컴퓨터입니다.
MC67 Base 모델
비용 효과적인 라인 확장을 통한 현장 근무자의 생산성 향상
MC67 Base는 MC67 시리즈의 비용대비 효과적인 확장입니다.
튼튼한 보급형 플랫폼을 찾는 고객들에게 MC67 Base는 현장 근로자에게 생산성을 높일 수 있는 모든 기능을 제공하며 MC65 및 MC55 액세서리와 역호환이 될 뿐 아니라 MC67 프리미엄 버전으로 귀사 시스템에 액세스할 수 있도록 지원합니다.
Windows® Embedded Handheld 6.5가 실행되는 MC67 Base는 복잡한 애플리케이션, 유연한 고속 이동통신 및 Wi-Fi 무선 연결을 지원하고 거의 모든 유형의 데이터를 캡처할 수 있습니다.
결과는? 향상된 고객 서비스. 고객 만족도 제고. 고객 유지 가능성 증대.
MC67 Premium 모델
작업자가 작업을 수행하는 데 필요한 모든 기능 제공
MC67 Premium을 사용하는 경우 모빌리티 전략을 가장 효과적으로 지원하는 운영 체제(Windows® Embedded Handheld 6.5 또는 Android™ Jelly Bean 4.1)를 선택하여 다양한 비즈니스 시스템 정보에 빠르게 액세스함으로써 작업 효율성과 정확성을 향상시킬 수 있습니다.
수리가 필요한 장비를 촬영한 동영상 클립을 보내 내부 전문가 또는 장비 제조업체로부터 즉시 조언을 얻습니다.
고해상도 스냅 사진으로 상황을 기록, 바코드를 스캔하여 사용 중인 부품을 빠르고 정확하게 추적하며 중요 문서는 캡처합니다.
고객에게 전화를 걸어 도착 시간 창을 업데이트합니다. 이메일을 확인하고 답장을 보냅니다.
또한 현재 MC65를 사용하는 경우 대부분의 기존 MC55/MC65 액세서리와의 백워드 호환성에 따라 최신 모바일 컴퓨팅 기술로의 비용 효율적인 업그레이드가 가능합니다.
PHYSICAL CHARACTERISTICE
Dimensions : 6.38 in. L x 3.03 in. W x 1.32 in. D (162.2 mm L x 77 mm W x 33.5 mm D)
Weight : 13.5 oz./385 g (with rechargeable 3600mAh Lithium Ion battery)
Display : 3.5 in. color VGA display, touch, 640 x 480 portrait, 650+ NIT s
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh battery
Backup Battery : Ni-MH battery (rechargeable) 15mAh 3.6V nominal (not user-accessible or replaceable)
Expansion Slot : Micro SD card slot (supports up to 32GB)
Communication : Interface: USB 2.0 high speed (host and client)
PERFORMANCE CHARACTERISTICS
CPU : Dual core 1GHz OMAP 4 processor
Operating System : Microsoft® Embedded Handheld 6.5 Professional
Memory : 256 MB RAM/2 GB Flash
DATA CAPTURE
Options :
2D SE4500-SR imager
2D SE4500-SR imager + 8 MP Camera
2D SE4500-DL imager + 8 MP Camera
2D SE4500-DL imager
2D SE4500-DPM/HD + 8 MP camera
Data Types : 1D/2D bar codes, photographs, video, signatures and documents
WIRELESS VOICE AND DATA COMMUNICATIONS
WAN Radio : 4G HSPA+ Frequency band: UMTS/HSDPA and HSUP A - 850, 900, 1900 and 2100 MHz; GSM/EDGE: 850, 900, 1800 and 1900 MHz
WLAN : Push-to-talk (PTT ); VoIP -ready
INTEGRATED GPS
Integrated standalone and Assisted-GPS (A-GPS): SUPL 1.0
WIRELESS PAN AND DATA COMMUNICATIONS
Bluetooth Class II , v2.1 with Enhanced Data Rate (EDR)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC55A0-HC 2D 헬스케어PDA 의료용모바일컴퓨터 산업용PDA 바코드PDA 매뉴얼HION IT
지브라 MC55A0-HC 헬스케어 PDA는 차세대 의료 모빌리티를 위해 소독이 가능한 견고한 의료용 모바일 컴퓨터로 휴대하기 쉽고 사용하기 쉬우며 환자 모니터링이 간편한 산업용PDA입니다.
MC55A0-HC 헬스케어 바코드 PDA는 병원용으로 설계되어 있어 일상적인 낙하와 충돌을 견딜 뿐만 아니라 환자용으로 사용한 후 소독도 가능합니다. 또한 강력한 무선 애플리케이션 성능과 무선 네크워크 옵션을 통해 의료 서비스 제공자가 이동 중에 환자 기록 액세스를 통해 환자 모니터링에 집중하고, 약을 정확히 투여하며, 환자의 활력 징후를 관찰하고, 검사실과 조제실에 지시하며, 검사 결과를 열람하는 등의 일을 모두 몇 초만에 병원 내 어디에서든 할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.78 in. L x 3.03 in. W x 1.1 in. D (14.7 cm L x 7.7 cm W x 2.8 cm D)
Weight : 11.9 oz./338 g (including standard battery)
Display : PenTile® 3.5 in Color VGA, super bright 650+ NITS
Touch Panel : Glass analog resistive touch
Display : Backlight LED backlight
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh Smart Battery
Backup Battery : Ni-MH battery (rechargeable) 18mAh 2.4V (not user accessible)
Expansion Slot : microSD slot with SDHC Support (maximum 32GB)
Comm. Interface : USB 1.1 host and client
Keypad Options : QWERTY; Numeric
Audio : VoWLAN; support for Bluetooth headsets; handset and speaker phone modes
PERFORMANCE CHARACTERISTICS
CPU : Marvell™ PXA 320 @ 806 MHz processor
Operating System : Microsoft® Windows Mobile ® 6.5 Classic
Memory : 256MB RAM; 1GB Flash
USER ENVIRONMENT
Operating Temp. : 14° F to 122° F/-10° C to 50°C
Storage Temp. : -40° F to 158° F/-40° C to 70° C
Humidity : 95% non-condensing
Drop Specification : Multiple 6 ft./1.8 m drops per MIL-STD 810G specifications
Tumble Specification : 1,000 1.6 ft./0.5 m tumbles (2,000 hits)
Sealing : IP64 per IEC sealing specifications
Clock : ntegrated real time clock
Electrostatic Discharge (ESD) : 15KV Air; 8KV Touch
BATTERY PERFORMANCE
User Profiles Minimally 8 hours based on 600 scans and WLAN transmits per hour with display on and standard capacity battery
DATA CAPTURE OPTIONS
Options 2D SE4500-DL imager; 3.2 MP auto-focus flash-enabled digital color camera; captures 1D and 2D bar codes, color photographs and video, signatures and documents
REGULATORY
Electrical Safety : Certified to UL/cUL 60950-1, IEC/EN60950-1
Environmental : RoHS-compliant
WLAN and Bluetooth (PAN) : USA: FCC Part 15.247, 15.407 Canada: RSS-210, RSS 310 EU: EN 300 328, EN 300 440-2, EN 301 893 Japan: ARIB STD-T33, ARIB STD-T66, ARIB STD-T70 & T71 Australia: AS/NZS 4268
RF Exposure : USA: FCC Part 2, FCC OET Bulletin 65 Supplement C Canada: RSS-102 EU: EN 50392 Australia: Radiocommunications Standard 2003
EMI/RFI : North America: FCC Part 15, Class B Canada: ICES 003 Class B EU: EN55022 Class B, EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 60601-1-2
Laser Safety : IEC/Class 2/FDA ll in accordance with IEC60825-1 /EN 60825-1
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
중소규모의 기업 또는 신흥 시장에서, 그리고 현장 직원이 장비를 수리하거나 판매 장부를 기록 도중 또는 배송물을 반출하여 전달하는 모든 경우와 상황에서 각 직원들의 한 가지 공통점은 고객과 매일 접촉하는 당사자라는 점입니다. 직원들의 직무 수행 속도와 수행 능력은 수입, 고객 만족, 고객 보유력 및 노동비에 직접적인 영향을 미치게 됩니다.
지브라 MC45 산업용 PDA는 매출 손실을 방지하고 고객을 잃지 않으면서 직원에게 직무를 올바르게 수행하기 위해 필요한 실시간 정보를 적재적소에 제공할 수 있는 경제적인 방법입니다.
이를 통해 직원은 소비자가 원하는 세련된 소비자 스타일링과 간소화된 운용을 비롯하여 비즈니스에 필요한 기능, 내구성, 보안 및 관리성을 갖추게 됩니다.
진정한 현장 내구성
MC45 바코드 PDA는 현장에서 활용하도록 제작되었으며 직원이 온도 조절이 가능한 차량에서 실외로 이동할 때 자주 발생하는 낙하, 충돌, 유출, 먼지, 진동 및 열충격을 처리할 수 있습니다.
고급형 1D 스캔 기술
적응형 ScanTM 기술을 사용한 Zebra의 업계 선도 1D 스캔 엔진으로 스캔 집중적인 작업을 쉽게 수행할 수 있으며 광범위한 스캐닝 범위는 접촉점 근처에서 15피트/4.5m 떨어진 곳에 이르기까지 더러워졌거나 손상되었거나 인쇄 상태가 좋지 않은 바코드를 손쉽게 캡처할 수 있습니다.
더 많은 지역에서 GPS 서비스 지원
직원들은 번잡한 도시 지역, 숲이 무성한 지역 또는 건물 내부에서도 신뢰할 수 있는 GPS 액세스를 통해 실시간 방향 및 지오스탬프에 액세스하여 애플리케이션에 대한 정보를 자동으로 캡처할 수 있습니다.
'내외부' 무선 연결
도로나 사무실에서 직원들이 3.5G GSM HSDPA 휴대폰과 802.11a/b/g Wi-Fi에 계속 연결되어 있도록 합니다.
OS에 관계없이 사용 가능한 애플리케이션 지원(내장형)
RhoMobile 제품군에 대한 지원은 HTML5 기반 OS에 관계없이 사용 가능한 애플리케이션을 개발하게 되어 응용 프로그램 개발 시간 및 비용을 크게 절감하고 하나의 응용 프로그램을 운영 체제가 서로 다른 여러 장치에서 실행할 수 있게 되었습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.6 in. L x 2.6 in. W x 1.0 in. D (14.2 cm L x 6.6 cm W x 2.5 cm D)
Weight : 8.73 oz./247.4 g
Display : Outdoor-viewable 3.2 in. QVGA with backlight, 240 W x 320 L
Standard Battery : Rechargeable Lithium Ion 3.7V, 3080 mAh
Expansion Slot : User accessible 32 GB microSD slot with SDHC support Network
Connections : USB 2.0 High Speed (host and client), WLAN, WWAN and Bluetooth
PERFORMANCE CHARACTERISTICS
CPU : 600 MHz, ARM 11 processor, MSM 7627
Operating System : Microsoft® Windows Embedded Handheld™ 6.5.3 Professional Edition
Memory : 256 MB RAM / 1GB Flash
DATA CAPTURE OPTIONS
Camera : Autofocus 3.2 MP with user-controllable flash; supports integrated 1D/2D bar code capture
1D Laser Scanner : 1D* laser with Adaptive Scan technology
WIRELESS LAN VOICE AND DATA COMMUNICATIONS
Radio : Tri-mode IEEE ® 802.11a/b/g
Data Rates Supported :1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
Security : WPA2, WEP (40 or 128 bit), TKIP, TLS, TTLS (MSCHAP),TTLS (MS-CHAP v2), TTLS (CHAP), TTLSMD5, TTLS-PAP, PEAP-TLS, PEAP (MS-CHAP v2), AES, LEAP, CCXv4 certified; FIPS 140-2 certified
WIRELESS PAN VOICE AND DATA COMMUNICATIONS
Bluetooth : Class II , V2.0 with Enhanced Data Rate (EDR)
WIRELESS WAN DATA AND VOICE COMMUNICATIONS
Radio : 3.5G HSDPA, Quad-Band GPRS/EDGE
Frequency Band :
GSM : Quad Band : 850/900/1800/1900 MHz
UMTS/HSDPA : Americas: 850/1900 MHz
UMTS/HSDPA : Rest of the world: 2100 MHz
GPS Integrated, Autonomous and Assisted-GPS (A-GPS)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라 MC9200 산업용 PDA는 차세대 지브라 MC9000 시리즈로, 창고 바닥부터 도크 도어까지 요구 조건이 까다로운 재고 및 자산 관리 환경에서 업계 최고 수준의 모빌리티를 자랑합니다.
Zebra MC9200 모바일 컴퓨터은 세 가지 운영체제, 운영체제 간 전환기능, 7개의 첨단 스캔엔진, 6개의 교체형 키패드 및 오늘날의 그래픽 집중적 애플리케이션을 지원하는 충분한 출력 등으로 러기드 모바일 컴퓨팅 및 기기 유연성을 한층 업그레이드한 제품입니다.
또한 고객이 최대한 저렴한 비용으로 최신 기술 플랫폼으로 업그레이드할 수 있도록 돕는다는 약속의 일환으로, 이미 MC9000 시리즈 모바일 컴퓨터를 보유하고 있는 경우 동일한 액세서리를 사용할 수 있도록 MC9200을 설계했습니다.
MC9200 바코드 PDA는 거친 환경에서 생산성과 정확도의 수준을 한 차원 높이기 위해 필요한 모든 모바일 컴퓨팅 기술을 제공합니다.
다양한 OS
Android™, Windows Embedded Compact 또는 Windows Embedded Handheld 등 여러 운영체제 중에서 기술 전략과 환경을 지원하는 운영체제를 선택할 수 있습니다.
MX - ANDROID를 더욱 강력한 엔터프라이즈급 OS로 업그레이드
Mobility Extensions(Mx)는 더욱 향상된 모바일 장치 제어, 애플리케이션 액세스 및 Wi-Fi 성능과 보안을 제공하여 Android를 더욱 강력한 엔터프라이즈급 OS로 바꿔주고 지원 시간을 줄여주며 작업자 생산성과 장치 가동 시간을 극대화시킬 기능을 더했습니다.
어떤 애플리케이션이라도 지원할 수 있는 파워
듀얼 코어 1 GHz 프로세서, 2GB 플래시 메모리 그리고 최대 32GB의 추가 SD 메모리가 지원되므로 여러 개의 복잡한 ERP 애플리케이션을 동시에 실행할 수 있습니다.
The power you need to support any application
A dual core 1 GHz processor, 2GB of Flash memory, up to 32GB of additional SD memory and Microsoft's advanced mobile operating systems provide the power to run complex ERP applications simultaneously.
High-speed 802.11a/b/g/n Wi-Fi
Support for the fastest Wi-Fi connection available today - 802.11n - provides your workers with the best possible wireless voice and data experience.
Proven rugged construction, ready for your most challenging environments
Every day, the MC9000 Series devices deliver reliable performance, despite everyday drops on concrete, subzero cold, extreme heat, dust, spills and more.
Government-grade security
Government-grade FIPS 140-2 Level 1 certification secures Wi-Fi and Bluetooth wireless communications, without impacting device or application performance.
Six advanced scan engines - the most scan engine options
No matter what type of barcodes are in use in your facility, there is a scan engine option that is optimized for rapid-fire capture of 1-D, 2-D, driver’s license, DPM codes and more - even if the codes are dirty, damaged or poorly printed.
Six interchangeable keypads for superior customisation
Choose the keypad that makes data entry as easy as possible for any type of application.
PHYSICAL CHARACTERISTICE
Dimensions : 9.1 in. L x 3.6 in. W x 7.6 in. H/ 23.1 cm L x 9.1 cm W x 19.3 cm H
Weight : 27 oz./765 g (includes battery)
Keyboard : 28-, 43- and 53-key; Terminal Emulation (5250, 3270, VT)
Display : 3.7 in VGA resolution; color
Power : PowerPrecision Lithium ion battery 2200 mAh
RFID Tag : Integrated UHF Gen2 tag (Premium models only)
IST : Sensor technology (Premium models only)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라RFID리더 Zebra MC3190-Z 900MHz 휴대형RFID리더 매뉴얼HION IT
지브라 MC3190-Z는 RFID의 혜택을 산업공간을 넘어 고객 대면 비즈니스 환경까지 확장하기 위해 특별히 설계된 비즈니스급 핸드헬드 RFID 리더기입니다.
서명에 견고한 디자인과 고성능으로 정평이 있는 제브라 산업용 핸드헬드를 기반으로 하여 더욱 빠른 판독률과 높은 처리량을 위해 고급, 고효율의 Zebra RFID 리더기 엔진을 추가했습니다.
방향에 민감하지 않은 획기적인 첨단 안테나를 추가하면 소매점과 의료 시설부터 사무실에 이르기까지 고객을 대면하는 환경 어디서나 매우 다양하게 사용할 수 있는 장치가 됩니다.
지브라 RFID 리더기 엔진
더욱 빠른 판독률과 높은 처리량을 위한 고급, 고효율 판독 성능을 제공합니다.
지브라가 특허를 가진 전방향 MAX RFID 안테나
방향에 민감하지 않은 설계로 더 빠르고 더 정확한 판독을 위해 이제 정밀한 리더기와 태그 정렬이 필요하지 않습니다.
핀포인트 로케이셔닝 기술
직관적이며 청각적이고 시각적인 신호의 독특한 결합을 통해 작업자에게 다음과 같이 특정 제품을 알려줍니다.
장치가 원하는 제품에 가까워지면 신호음의 빈도가 높아지고 볼륨이 커지면서 움직이는 막대 그래프의 크기가 커집니다.
사용하기 쉬운 API(애플리케이션 프로그래밍 인터페이스)
신속하고 비용 효율적인 애플리케이션 개발 가능
지브라 MAX 보안
최고급 암호화 및 인증 알고리즘, 그리고 VPN(가상 사설망)에 사용되는 FIPS 140-2 인증 및 지원.
가장 엄격한 업계의 보안 규정 및 민감한 정부 애플리케이션 요구사항도 준수합니다.
지브라 MAX 러그드
낙하, 지면 충돌, 밀봉에 대하여 MIL-STD 810F 표준을 충족하거나
초과 매일의 업무 사용 환경에 적합하며 부득이하게 떨어뜨리거나 물을 엎질러도 안정적으로 작동하며 수명 연장과 세척이 가능합니다.
지브라 MAX 데이터 캡처
단일 장치에서 뛰어난 RFID 및 바코드 스캐닝 기능을 제공하며 두 장치를 별도 구매할 필요가 없어 자본과 운영 비용이 절감 됩니다.
백라이트가 포함된 320 x 320 디스플레이
거의 모든 조명 상태에서도 쉽게 볼 수 있도록 1/4 VGA보다 30% 높은 해상도
PHYSICAL CHARACTERISTICS
Dimensions : 7.6 in. H x 4.7 in. W x 6.4 in D (19.34 cm H x 11.94 cm W x 16.26 cm)
Weight : 22.93 oz./650 g (including battery, stylus, narrow keypad & strap)
Display : 3 in. QVGA color display (320 x 320) touchscreen with backlight
Battery : Li-Ion 4,400 mAh @ 3.7Vdc (2X Battery only)
Network Connections : RS232; USB (host and client)
Keypad : 48-key Alpha-Numeric
Data Capture Options RFID, 1D laser scanner and 2D imager
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA320 @ 624 MHz
Operating System : Microsoft® Windows Embedded Handheld 6.5.3
Memory : 256MB RAM/1GB Flash as shipped, user expandable
RFID
RFID Power Output : EU - 1/2 watt ERP for Europe US - 1 watt EIRP
RFID Antenna Type : Integrated Orientation Insensitive
Frequency Range : EU - 865-868 MHz; US - 902-928 MHz
Standards Supported : EPC Gen 2 DRM (DRM compliant up to 0.5W)
WIRELESS LAN VOICE AND DATA COMMUNICATIONS
Radio : Tri-mode IEEE® 802.11a/b/g
Data Rates Supported : 802.11a: up to 54 Mbps, 802.11b: up to 11 Mbps, 802.11g: up to 54 Mbps
VoIP-Ready : Optional (region dependent)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라 MC2100 산업용 PDA 시리즈 모바일 컴퓨터는 매장에서 창고까지, 작업 지점에서 재고 데이터를 자동으로 캡처합니다.
Zebra MC2100 바코드 PDA는 중저가 제품이지만 상위 모델에서나 볼수 있는 다양한 기능을 갖추었으며, 업계 최고의 처리 능력, 견고한 디자인, 우수한 인체공학, 유연한 데이터 캡처 옵션, 엔터프라이즈급 PTT (Push-to-talk), 집중화된 관리 및 플랫폼 간 OS 애그노스틱 애플리케이션을 만들 수 있는 기능을 기대할 수 있습니다.
강력한 스캐닝 성능
지브라 MC2100 모바일 컴퓨터는 동급의 다른 어떤 기기보다도 다양한 옵션(1D 선형 이미저, 1D 레이저 또는 1D/2D 영역 이미저)을 제공하며 세 가지 스캔 엔진 모두 손상되거나 오염되거나 흠집이 난 바코드를 한 번에 스캔할 수 있습니다.
우수한 사용 편리성을 위한 뛰어난 인체공학식 설계
경량의 MC2100 산업용 PDA는 편의성을 고려한 설계와 함께 한 손으로 쉽게 사용할 수 있도록 최적화된 제품입니다.
장치 뒷면에 손가락 고리가 장착되어 안전하게 잡고 사용할 수 있습니다. 키의 크기와 위치는 한 손으로 조작하기에 쉽게 설계되었습니다.
하루 종일 어디에서나 사용할 수 있는 견고한 디자인
지브라 MC2100 바코드 PDA는 낙하 및 충격시험을 거친 IP54 등급 밀봉, 오목한 키패드 및 Corning® Gorilla® 유리 출력 창을 채택하여 낙하 사고, 부딪힘, 액체 엎지름에도 계속 작동합니다.
모든 바코드에 적용 가능한 업계 최고의 스캔 성능
캡처해야 할 데이터의 유형에 따라 최고의 성능을 발휘할 스캔 엔진을 선택하십시오.
우수한 사용 편리성을 위한 뛰어난 인체공학
MC2100은 가볍게 설계되어 간편하고 한 손으로 사용할 수 있습니다.
하루 종일 어디에서나 사용할 수 있는 견고한 디자인
MC2100은 낙하 및 충돌 시험을 거친 IP54 등급 밀봉, 오목한 키패드 및 Corning® Gorilla® 유리 출력 창을 채택하여 피할 수 없는 낙하, 부딪힘, 물 엎지름에도 계속 작동합니다.
진정한 엔터프라이즈급 PTT(Push-to-talk)
통합 TEAM Express 클라이언트를 통해 단체 방송 및 개인 응답 PTT 기능을 사용할 수 있습니다.
MC2100 및 기타 Zebra 모바일 컴퓨터용 단일 애플리케이션 버전 만들기
Zebra RhoElement를 사용하여 Android, Microsoft® Windows Mobile 또는 Windows CE 운영 체제와 관계없이 Zebra 모바일 컴퓨터와 동일하게 보고, 느끼고, 작동할 수 있는 단일 애플리케이션을 만들 수 있습니다.
PHYSICAL CHARACTERISTICE
Dimensions : 6.76 in. H x 1.34 in. D x 2.40 in. W (171.7 mm H x 34.1 mm D x 60.9 mm W)
Weight :
WLAN with battery : 8.3 oz./234.7 g to 8.5 oz./240.7 g
Batch with battery:8.2 oz./231.7 g to 8.4 oz./237.7 g
Display : 2.8 in. QVGA with backlight; TFT-LCD, 64K colors
Expansion Slot : User accessible Micro SDHC card slot (up to 32GB)
Connectivity : Wi-Fi 802.11b/g/n and Bluetooth (MC2180 only); USB 1.1 full speed host/client
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA 320 624 MHz
Operating System : Microsoft® Embedded CE 6.0 Core & Pro (MC2180 Only) Editions
Memory : 128 MB RAM/256 MB ROM; 256MB RAM/256MB ROM (MC2180 Only); user accessible microSD card slot (supports up to 32GB)
DATA CAPTURE
Scanner Options : 1D linear imager, 1D1 laser, 1D/2D area imager (MC2180 only)
Exit Window : Corning® Gorilla® Glass
WIRELESS COMMUNICATIONS (MC2180 ONLY)
WLAN : 802.11b/g/n
WLAN Security : WEP, WPA, WPA2, 802.1x, EAP-TLS,TTLS (CHAP, MS-CHAP, MS-CHAPv2, PAP or MD5), PEAP (TLS, MSCHAPv2, EAP-GTC), LEAP, EAP-FAST (TLS, MS-CHAPv2, EAP-GTC), CCXv4 certified
WPAN Bluetooth : Class II, v 2.0 with EDR; integrated antenna
VOICE AND AUDIO
Audio : Speaker and microphone (MC2180 only) Buzzer (MC2100 only)
Push-to-Talk : PTT (client included); high quality speakerphone, wired headset support, PTT will support headset and speakerphone mode (MC2180 Only)
Voice Directed Picking : TEKSPEECH PRO TekSpeech Pro Certified (MC2180 Only); Compatible with 3rd party VDP clients (MC2180 only)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라PDA Zebra MC17시리즈 1D 산업용PDA 퍼스널쇼퍼 바코드PDA 매뉴얼HION IT
지브라 MC17 시리즈 산업용 PDA는 구매 선호도 기반으로 한 고객별 프로모션과 제안으로 고객 경험의 가치를 높이십시오.
매장 직원이 현장에서 재고와 가격을 보다 효율적으로 관리할 수 있도록 지원합니다.
지브라 MC17 시리즈 바코드 PDA는 다목적 리테일 모바일 컴퓨터로 간접 비용을 줄이고 고객 충성도를 향상시킵니다.
고객의 쇼핑 경험을 혁신적으로 개선
퍼스널 쇼퍼 시리즈 무선 리테일 모바일 컴퓨터는 새로운 차원의 우수한 고객 서비스와 향상된 지원 생산성 및 효율성을 제공합니다.
지브라 MC17 바코드 PDA 다목적 장치는 직원들에게 현장에서 고객의 질문에 답하고 재고 보충에서 가격 인하까지 재고를 오류 없이 효율적으로 관리하며 계산대 대기 시간을 단축하는 데 필요한 도구를 제공하기 위한 목적으로 설계되었습니다.
O/S 선택 (안드로이드 또는 윈도우즈)
널리 사용되는 모바일 운영 체제인 Android KitKat 또는 Windows Embedded Compact 7 최신 버전 중에서 선택하십시오.
그런 다음 기존 MC17 Windows 장치를 Android로 쉽게 업데이트할 수 있습니다.
거의 모든 바코드를 즉시 캡처
지브라는 첨단 이미징 엔진은 바코드가 용지에 인쇄되었거나, 모바일 폰 화면에 표시되거나, 손상, 긁힘 또는 인쇄 품질 저하와 상관없이 모든 1D 또는 2D 바코드를 빠르게 캡처할 수 있습니다.
또한 전방향 스캔이 가능하므로 구매 고객과 매장 직원 모두에게 포인트-앤-슛(Point-and-Shoot) 방식의 간편함을 제공합니다.
Windows CE 5.0 Professional
Standard tool set for rapid application development.
Full Internet Explorer 6.0
Familiar platform for web-enabled applications.
Zebra PocketBrowser compatibility
Dramatically simplifies development of complex web-based solutions that integrate advanced functionalities such as barcode scanning, wireless connectivity and mobile printing.
320x240 QVGA colour display (MC17T only – backlit, resistive touch panel)
Enables rich content delivery for an enhanced customer experience.
Durability
Built to endure everyday drops to ensure reliable operation and investment protection.
Six-key intuitive interface
Easy to use for first time users of any age.
Sleek design
Easy to hold, minimizes user fatigue.
Wi-Fi IEEE 802.11 a/b/g
Provides wireless freedom for your customers and instant access to information for store associates.
Large capacity battery
Provides up to eight hours of continuous operation.
Zebra's Mobility Services Platform compatibility
Reduces cost, complexity, and effort associated with device management.
Customisable top cover
Professional branding reminds customers of your competitive identity and provides an additional revenue stream for promotional opportunities for manufacturers.
PHYSICAL CHARACTERISTICS
Dimensions : 2.3 in. H x 8.11 in. L x 3.2 in. W/ 5.9 cm H x 20.6 cm L x 8.1 cm W
Weight : 9.5 oz./270 g (with battery)
Display :
MC17A: 2.8 in. 320x240 QVGA
MC17T: 2.8 in. 320x240 QVGA backlit resistive touch screen
Keyboard : 6 fully programmable keys
Power Source : Rechargeable 2400 mAh Li-ION battery pack
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라키오스크 Zebra MK3100 8인치 마이크로키오스크 산업용키오스크 산업용PC 매뉴얼HION IT
동급 최강의 처리 능력
1GHz 프로세서, 1GB RAM/8GB 플래시 및 MicroSD 카드 슬롯을 통한 최대 32GB의 추가 메모리가 내장되어 있어 가장 복잡한 멀티미디어 애플리케이션에 적합한 능력을 제공하는, 동급 최강의 성능을 자랑하는 플랫폼입니다.
모든 바코드 캡처
라벨이 손상된 경우에도 종이 라벨(플라스틱 포인트 카드, 기프트 카드 또는 휴대 전화 화면)에 인쇄된 1D 및 2D 바코드를 스캔합니다.
메모리에서 주변 장치까지 필요한 모든 제품을 추가합니다.
사용자가 액세스할 수 있는 USB 포트 3개와 블루투스를 통해 비즈니스 요구 사항에 맞춰 MK3100을 사용자가 지정할 수 있으며, 까다로운 애플리케이션에 메모리도 추가합니다.
무선 또는 유선 프린터를 추가해 사용자가 영수증, 선물 등록 등을 인쇄할 수 있습니다.
직접 계산할 수 있는 카드 결제기와 데이터 입력을 단순화하는 키보드도 추가할 수 있습니다.
전체 화면 비디오 지원
풍부한 비디오 기반 정보의 전달로 고객과 직원과 좀 더 수월하게 연락할 수 있습니다.
사용 방법 및 제품 데모 비디오는 고객에게 부가 가치를 제공합니다.
교육 비디오는 판매 기술 향상에 도움을 주고 직원들이 새로운 항목에 대한 최신 정보를 습득합니다.
아울러 장치를 사용하지 않을 때 비디오 광고를 실행할 수 있는 기능은 광고 예산과 MK3100을 최대한 활용하는 데 도움을 줍니다.
모바일 바코드를 사용해 더욱 견고하고 개인적인 고객과의 관계 구축
컴퓨터 화면에서 전자 바코드를 스캔할 수 있어 거의 항상 고객이 보유한 개별 장치인 휴대 전화에 연결할 수 있습니다.
그 결과 편리함과 가치를 얻게 됩니다. 고객은 언제나 자신의 고객 카드, 쿠폰, 탑승권 등을 휴대하여 시간과 비용을 절약합니다.
손쉬운 배치
802.11a/b/g/n 및 이더넷 지원으로 기존 무선 또는 유선 네트워크에 쉽게 연결할 수 있습니다.
'n' 지원은 데이터 집약적인 멀티미디어 애플리케이션에 적합한 대역폭을 제공합니다.
'a'는 중요한 매장 무선 인프라에 사용할 수 있으므로 성능을 보존하기만 하면 됩니다.
PoE(Power-over-Ethernet)를 지원하여 모든 장치에 동일한 콘센트를 사용할 수 있습니다.
표준 VESA 장착으로 선반, 벽면, 전시 공간을 비롯한 모든 장소에 쉽게 장착할 수 있습니다.
OS 비의존형인 세련된 애플리케이션에 적합한 RhoElements 지원
운영 체제와 상관 없이 모든 장치에서 실행할 수 있는 한 가지 버전의 애플리케이션을 만들어 애플리케이션 개발 투자를 최소화합니다.
PHYSICAL CHARACTERISTICS
Dimensions : 8.87 in. H x 8.87 in. L x 2.17 in. W (22.5 cm H x 22.5 cm L x 5.5 cm W)
Weight : 1.9 lbs./0.86 kg
Display : 8 in./20.32 cm diagonal WVGA LCD; 800 x 480 pixels; resistive touch screen
Power : DC: 12v; Support for Power-over-Ethernet (802.3af and 802.3at)
Expansion Capabilities : User accessible MicroSD card slot; USB host
Data Ports : 1 Mini USB 2.0 host/client; 2 Mini USB 2.0 host; Ethernet RJ-45
Audio : Two integrated stereo speakers, microphone and headset jack
Scanner : Imager for capture of 1-D, 2-D, and PDF417 codes
Keys : Four programmable keys
SYMBOLOGY DECODE CAPABILITY
2D Imager Scanner Decode Capability :
1D : Code 39, Code 128, EAN-8, EAN-13, UPCEAN-128, UPCA, UPCE, UPC/EAN Supplementals, GS1 DataBar, Chinese 2 of 5, Code 93, Discrete 2 of 5, Interleaved 2 of 5 (including ITF14 and ITF 2 of 5), Codabar, ISBT 128
2D : PDF417, QR, Aztec, DataMatrix and MaxiCode
USER ENVIRONMENT
Operating Temp. : 32° to 104° F /0° to 40° C
Storage Temp. : -40° to 158° F /-40° to 70° C
Humidity : 5% to 85% (non-condensing)
Application Development Tools : RhoMobile Suite for web development; Enterprise Mobility Developer Kit (EMDK) for C for developing native C/C++ applications; Enterprise Mobility Developer Kit (EMDK) for .NET for developing managed .NET applications in C# or VB.NET
Management Tools : Rapid Deployment Client; Zebra Mobility Services Platform (MSP)
Ambient Light : Immunity Immune to normal indoor lighting up to 1600 Lux; immune to sunlight up to 86,000 Lux
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라PDA Zebra MC18 2D 산업용PDA 퍼스널쇼퍼 바코드PDA 매뉴얼HION IT
매장 방문 고객의 쇼핑 경험을 혁신적으로 개선한 지브라 MC18 산업용 PDA 퍼스널 쇼퍼로 쇼핑을 즐길 수 있는 고객 환경을 선사하십시오.
이 스마트폰형 첨단 모바일 컴퓨터는 고객에게 실시간 연결을 지원하여 진정한 가치를 선사합니다.
안드로이드 롤리팝 및 Zebra의 Mx(Mobility Extensions) 옵션으로 소비자용 안드로이드를 진정한 엔터프라이즈급 운영체제로 전환하는 일련의 기능이 추가되었습니다.
고객의 쇼핑 경험을 혁신적으로 개선
지브라 MC18 바코드 PDA 퍼스널 쇼퍼 시리즈 무선 리테일 모바일 컴퓨터는 새로운 차원의 우수한 고객 서비스와 향상된 지원 생산성 및 효율성을 제공합니다.
Zebra MC18 산업용 PDA 다목적 장치는 직원들에게 현장에서 고객의 질문에 답하고 재고 보충에서 가격 인하까지 재고를 오류 없이 효율적으로 관리하며 계산대 대기 시간을 단축하는 데 필요한 도구를 제공하기 위한 목적으로 설계되었습니다.
O/S 선택 (안드로이드 또는 윈도우즈)
널리 사용되는 모바일 운영 체제인 Android KitKat 또는 Windows Embedded Compact 7 최신 버전 중에서 선택하십시오.
그런 다음 기존 MC18 Windows 장치를 Android로 쉽게 업데이트할 수 있습니다.
거의 모든 바코드를 즉시 캡처할 수 있습니다.
지브라의 첨단 이미징 엔진은 바코드가 용지에 인쇄되었거나, 모바일 폰 화면에 표시되거나, 손상, 긁힘 또는 인쇄 품질 저하와 상관없이 모든 1D 또는 2D 바코드를 빠르게 캡처할 수 있습니다.
또한 전방향 스캔이 가능하므로 구매 고객과 매장 직원 모두에게 포인트-앤-슛(Point-and-Shoot) 방식의 간편함을 제공합니다.
PHYSICAL CHARACTERISTICS
Dimensions : 2.95 in. H x 8.58 in. L x 3.09 in. W/ 7.50 cm H x 21.80 cm L x 7.86 cm W
Weight : 10.6 oz./300 g (with battery)
Display : Color LCD; 4.0 inch 480x800 WVGA resolution; 16 bits/pixel RGB; LE D backlight; capacitive touch screen; Corning Gorilla Glass 3
Keyboard : 1 dedicated trigger key
Power Source : PowerPrecision+ 2725 mAh Li-Ion rechargeable battery
PERFORMANCE CHARACTERISTICS
Processor : TI OMAP 4430, Dual Core, 800MHz
Operating System :
Windows Embedded Compact 7
Microsoft Internet Explorer Embedded 7
Memory : 512 MB RA M/2 GB Flash or 1 GB RA M/4 GB Flash
Interface/Communications : USB 2.0 Client for Microsoft ActiveSync for service and maintenance
Light Source : Red LED Illumination with LED dot aim pattern
Scan Rate : Imaging rate: 30 Frames per second, 1280p x 800p
Ambient Light Immunity : Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED: 450 Ft. Candles (4,844 Lux) Sunlight: 8,000 Ft. Candles (86,111 Lux)
WIRELESS SECURITY
Wi-Fi Security Certification : Legacy, WPA and WPA 2
Authentication : None, EAP-TTLS (CHAP, MSCHAP, MSCHAPv2, PAP , MD5), EAP-TLS, PEAP (TLS, MSCHAPv2, GTC), LEAP and EAP-FAST (TLS, MSCHAPv2, GTC)
Encryption : WEP (40 or 104 bit), TKIP and AES
USER ENVIRONMENT
Operating Temperature : 32° to 104° F/0° to 40° C
Storage Temperature : 4° to 140° F/-20° to 60° C
Humidity : 40° C (RH 10% - 95%) non-condensing
Drop Specification : Withstands multiple 4 ft./1.2 m drops to vinyl tile over concrete
Tumble Specification : 1,000 0.5 m/1.64 ft. tumbles at room temperature
WIRELESS NETWORKING
WLAN : Wi-Fi IEEE 802.11a/b/g/n
WPAN : Bluetooth Class 1.5 2.1+EDR/ Bluetooth 4.0 with Bluetooth SMART technology
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 MC9200 산업용 PDA는 차세대 지브라 MC9000 시리즈로, 창고 바닥부터 도크 도어까지 요구 조건이 까다로운 재고 및 자산 관리 환경에서 업계 최고 수준의 모빌리티를 자랑합니다.
Zebra MC9200 모바일 컴퓨터은 세 가지 운영체제, 운영체제 간 전환기능, 7개의 첨단 스캔엔진, 6개의 교체형 키패드 및 오늘날의 그래픽 집중적 애플리케이션을 지원하는 충분한 출력 등으로 러기드 모바일 컴퓨팅 및 기기 유연성을 한층 업그레이드한 제품입니다.
또한 고객이 최대한 저렴한 비용으로 최신 기술 플랫폼으로 업그레이드할 수 있도록 돕는다는 약속의 일환으로, 이미 MC9000 시리즈 모바일 컴퓨터를 보유하고 있는 경우 동일한 액세서리를 사용할 수 있도록 MC9200을 설계했습니다.
MC9200 바코드 PDA는 거친 환경에서 생산성과 정확도의 수준을 한 차원 높이기 위해 필요한 모든 모바일 컴퓨팅 기술을 제공합니다.
다양한 OS
Android™, Windows Embedded Compact 또는 Windows Embedded Handheld 등 여러 운영체제 중에서 기술 전략과 환경을 지원하는 운영체제를 선택할 수 있습니다.
MX - ANDROID를 더욱 강력한 엔터프라이즈급 OS로 업그레이드
Mobility Extensions(Mx)는 더욱 향상된 모바일 장치 제어, 애플리케이션 액세스 및 Wi-Fi 성능과 보안을 제공하여 Android를 더욱 강력한 엔터프라이즈급 OS로 바꿔주고 지원 시간을 줄여주며 작업자 생산성과 장치 가동 시간을 극대화시킬 기능을 더했습니다.
어떤 애플리케이션이라도 지원할 수 있는 파워
듀얼 코어 1 GHz 프로세서, 2GB 플래시 메모리 그리고 최대 32GB의 추가 SD 메모리가 지원되므로 여러 개의 복잡한 ERP 애플리케이션을 동시에 실행할 수 있습니다.
The power you need to support any application
A dual core 1 GHz processor, 2GB of Flash memory, up to 32GB of additional SD memory and Microsoft's advanced mobile operating systems provide the power to run complex ERP applications simultaneously.
High-speed 802.11a/b/g/n Wi-Fi
Support for the fastest Wi-Fi connection available today - 802.11n - provides your workers with the best possible wireless voice and data experience.
Proven rugged construction, ready for your most challenging environments
Every day, the MC9000 Series devices deliver reliable performance, despite everyday drops on concrete, subzero cold, extreme heat, dust, spills and more.
Government-grade security
Government-grade FIPS 140-2 Level 1 certification secures Wi-Fi and Bluetooth wireless communications, without impacting device or application performance.
Six advanced scan engines - the most scan engine options
No matter what type of barcodes are in use in your facility, there is a scan engine option that is optimized for rapid-fire capture of 1-D, 2-D, driver’s license, DPM codes and more - even if the codes are dirty, damaged or poorly printed.
Six interchangeable keypads for superior customisation
Choose the keypad that makes data entry as easy as possible for any type of application.
PHYSICAL CHARACTERISTICE
Dimensions : 9.1 in. L x 3.6 in. W x 7.6 in. H/ 23.1 cm L x 9.1 cm W x 19.3 cm H
Weight : 27 oz./765 g (includes battery)
Keyboard : 28-, 43- and 53-key; Terminal Emulation (5250, 3270, VT)
Display : 3.7 in VGA resolution; color
Power : PowerPrecision Lithium ion battery 2200 mAh
RFID Tag : Integrated UHF Gen2 tag (Premium models only)
IST : Sensor technology (Premium models only)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라RFID리더 Zebra MC3190-Z 900MHz 휴대형RFID리더 매뉴얼HION IT
지브라 MC3190-Z는 RFID의 혜택을 산업공간을 넘어 고객 대면 비즈니스 환경까지 확장하기 위해 특별히 설계된 비즈니스급 핸드헬드 RFID 리더기입니다.
서명에 견고한 디자인과 고성능으로 정평이 있는 제브라 산업용 핸드헬드를 기반으로 하여 더욱 빠른 판독률과 높은 처리량을 위해 고급, 고효율의 Zebra RFID 리더기 엔진을 추가했습니다.
방향에 민감하지 않은 획기적인 첨단 안테나를 추가하면 소매점과 의료 시설부터 사무실에 이르기까지 고객을 대면하는 환경 어디서나 매우 다양하게 사용할 수 있는 장치가 됩니다.
지브라 RFID 리더기 엔진
더욱 빠른 판독률과 높은 처리량을 위한 고급, 고효율 판독 성능을 제공합니다.
지브라가 특허를 가진 전방향 MAX RFID 안테나
방향에 민감하지 않은 설계로 더 빠르고 더 정확한 판독을 위해 이제 정밀한 리더기와 태그 정렬이 필요하지 않습니다.
핀포인트 로케이셔닝 기술
직관적이며 청각적이고 시각적인 신호의 독특한 결합을 통해 작업자에게 다음과 같이 특정 제품을 알려줍니다.
장치가 원하는 제품에 가까워지면 신호음의 빈도가 높아지고 볼륨이 커지면서 움직이는 막대 그래프의 크기가 커집니다.
사용하기 쉬운 API(애플리케이션 프로그래밍 인터페이스)
신속하고 비용 효율적인 애플리케이션 개발 가능
지브라 MAX 보안
최고급 암호화 및 인증 알고리즘, 그리고 VPN(가상 사설망)에 사용되는 FIPS 140-2 인증 및 지원.
가장 엄격한 업계의 보안 규정 및 민감한 정부 애플리케이션 요구사항도 준수합니다.
지브라 MAX 러그드
낙하, 지면 충돌, 밀봉에 대하여 MIL-STD 810F 표준을 충족하거나
초과 매일의 업무 사용 환경에 적합하며 부득이하게 떨어뜨리거나 물을 엎질러도 안정적으로 작동하며 수명 연장과 세척이 가능합니다.
지브라 MAX 데이터 캡처
단일 장치에서 뛰어난 RFID 및 바코드 스캐닝 기능을 제공하며 두 장치를 별도 구매할 필요가 없어 자본과 운영 비용이 절감 됩니다.
백라이트가 포함된 320 x 320 디스플레이
거의 모든 조명 상태에서도 쉽게 볼 수 있도록 1/4 VGA보다 30% 높은 해상도
PHYSICAL CHARACTERISTICS
Dimensions : 7.6 in. H x 4.7 in. W x 6.4 in D (19.34 cm H x 11.94 cm W x 16.26 cm)
Weight : 22.93 oz./650 g (including battery, stylus, narrow keypad & strap)
Display : 3 in. QVGA color display (320 x 320) touchscreen with backlight
Battery : Li-Ion 4,400 mAh @ 3.7Vdc (2X Battery only)
Network Connections : RS232; USB (host and client)
Keypad : 48-key Alpha-Numeric
Data Capture Options RFID, 1D laser scanner and 2D imager
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA320 @ 624 MHz
Operating System : Microsoft® Windows Embedded Handheld 6.5.3
Memory : 256MB RAM/1GB Flash as shipped, user expandable
RFID
RFID Power Output : EU - 1/2 watt ERP for Europe US - 1 watt EIRP
RFID Antenna Type : Integrated Orientation Insensitive
Frequency Range : EU - 865-868 MHz; US - 902-928 MHz
Standards Supported : EPC Gen 2 DRM (DRM compliant up to 0.5W)
WIRELESS LAN VOICE AND DATA COMMUNICATIONS
Radio : Tri-mode IEEE® 802.11a/b/g
Data Rates Supported : 802.11a: up to 54 Mbps, 802.11b: up to 11 Mbps, 802.11g: up to 54 Mbps
VoIP-Ready : Optional (region dependent)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라 MC2100 산업용 PDA 시리즈 모바일 컴퓨터는 매장에서 창고까지, 작업 지점에서 재고 데이터를 자동으로 캡처합니다.
Zebra MC2100 바코드 PDA는 중저가 제품이지만 상위 모델에서나 볼수 있는 다양한 기능을 갖추었으며, 업계 최고의 처리 능력, 견고한 디자인, 우수한 인체공학, 유연한 데이터 캡처 옵션, 엔터프라이즈급 PTT (Push-to-talk), 집중화된 관리 및 플랫폼 간 OS 애그노스틱 애플리케이션을 만들 수 있는 기능을 기대할 수 있습니다.
강력한 스캐닝 성능
지브라 MC2100 모바일 컴퓨터는 동급의 다른 어떤 기기보다도 다양한 옵션(1D 선형 이미저, 1D 레이저 또는 1D/2D 영역 이미저)을 제공하며 세 가지 스캔 엔진 모두 손상되거나 오염되거나 흠집이 난 바코드를 한 번에 스캔할 수 있습니다.
우수한 사용 편리성을 위한 뛰어난 인체공학식 설계
경량의 MC2100 산업용 PDA는 편의성을 고려한 설계와 함께 한 손으로 쉽게 사용할 수 있도록 최적화된 제품입니다.
장치 뒷면에 손가락 고리가 장착되어 안전하게 잡고 사용할 수 있습니다. 키의 크기와 위치는 한 손으로 조작하기에 쉽게 설계되었습니다.
하루 종일 어디에서나 사용할 수 있는 견고한 디자인
지브라 MC2100 바코드 PDA는 낙하 및 충격시험을 거친 IP54 등급 밀봉, 오목한 키패드 및 Corning® Gorilla® 유리 출력 창을 채택하여 낙하 사고, 부딪힘, 액체 엎지름에도 계속 작동합니다.
모든 바코드에 적용 가능한 업계 최고의 스캔 성능
캡처해야 할 데이터의 유형에 따라 최고의 성능을 발휘할 스캔 엔진을 선택하십시오.
우수한 사용 편리성을 위한 뛰어난 인체공학
MC2100은 가볍게 설계되어 간편하고 한 손으로 사용할 수 있습니다.
하루 종일 어디에서나 사용할 수 있는 견고한 디자인
MC2100은 낙하 및 충돌 시험을 거친 IP54 등급 밀봉, 오목한 키패드 및 Corning® Gorilla® 유리 출력 창을 채택하여 피할 수 없는 낙하, 부딪힘, 물 엎지름에도 계속 작동합니다.
진정한 엔터프라이즈급 PTT(Push-to-talk)
통합 TEAM Express 클라이언트를 통해 단체 방송 및 개인 응답 PTT 기능을 사용할 수 있습니다.
MC2100 및 기타 Zebra 모바일 컴퓨터용 단일 애플리케이션 버전 만들기
Zebra RhoElement를 사용하여 Android, Microsoft® Windows Mobile 또는 Windows CE 운영 체제와 관계없이 Zebra 모바일 컴퓨터와 동일하게 보고, 느끼고, 작동할 수 있는 단일 애플리케이션을 만들 수 있습니다.
PHYSICAL CHARACTERISTICE
Dimensions : 6.76 in. H x 1.34 in. D x 2.40 in. W (171.7 mm H x 34.1 mm D x 60.9 mm W)
Weight :
WLAN with battery : 8.3 oz./234.7 g to 8.5 oz./240.7 g
Batch with battery:8.2 oz./231.7 g to 8.4 oz./237.7 g
Display : 2.8 in. QVGA with backlight; TFT-LCD, 64K colors
Expansion Slot : User accessible Micro SDHC card slot (up to 32GB)
Connectivity : Wi-Fi 802.11b/g/n and Bluetooth (MC2180 only); USB 1.1 full speed host/client
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA 320 624 MHz
Operating System : Microsoft® Embedded CE 6.0 Core & Pro (MC2180 Only) Editions
Memory : 128 MB RAM/256 MB ROM; 256MB RAM/256MB ROM (MC2180 Only); user accessible microSD card slot (supports up to 32GB)
DATA CAPTURE
Scanner Options : 1D linear imager, 1D1 laser, 1D/2D area imager (MC2180 only)
Exit Window : Corning® Gorilla® Glass
WIRELESS COMMUNICATIONS (MC2180 ONLY)
WLAN : 802.11b/g/n
WLAN Security : WEP, WPA, WPA2, 802.1x, EAP-TLS,TTLS (CHAP, MS-CHAP, MS-CHAPv2, PAP or MD5), PEAP (TLS, MSCHAPv2, EAP-GTC), LEAP, EAP-FAST (TLS, MS-CHAPv2, EAP-GTC), CCXv4 certified
WPAN Bluetooth : Class II, v 2.0 with EDR; integrated antenna
VOICE AND AUDIO
Audio : Speaker and microphone (MC2180 only) Buzzer (MC2100 only)
Push-to-Talk : PTT (client included); high quality speakerphone, wired headset support, PTT will support headset and speakerphone mode (MC2180 Only)
Voice Directed Picking : TEKSPEECH PRO TekSpeech Pro Certified (MC2180 Only); Compatible with 3rd party VDP clients (MC2180 only)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라PDA Zebra MC17시리즈 1D 산업용PDA 퍼스널쇼퍼 바코드PDA 매뉴얼HION IT
지브라 MC17 시리즈 산업용 PDA는 구매 선호도 기반으로 한 고객별 프로모션과 제안으로 고객 경험의 가치를 높이십시오.
매장 직원이 현장에서 재고와 가격을 보다 효율적으로 관리할 수 있도록 지원합니다.
지브라 MC17 시리즈 바코드 PDA는 다목적 리테일 모바일 컴퓨터로 간접 비용을 줄이고 고객 충성도를 향상시킵니다.
고객의 쇼핑 경험을 혁신적으로 개선
퍼스널 쇼퍼 시리즈 무선 리테일 모바일 컴퓨터는 새로운 차원의 우수한 고객 서비스와 향상된 지원 생산성 및 효율성을 제공합니다.
지브라 MC17 바코드 PDA 다목적 장치는 직원들에게 현장에서 고객의 질문에 답하고 재고 보충에서 가격 인하까지 재고를 오류 없이 효율적으로 관리하며 계산대 대기 시간을 단축하는 데 필요한 도구를 제공하기 위한 목적으로 설계되었습니다.
O/S 선택 (안드로이드 또는 윈도우즈)
널리 사용되는 모바일 운영 체제인 Android KitKat 또는 Windows Embedded Compact 7 최신 버전 중에서 선택하십시오.
그런 다음 기존 MC17 Windows 장치를 Android로 쉽게 업데이트할 수 있습니다.
거의 모든 바코드를 즉시 캡처
지브라는 첨단 이미징 엔진은 바코드가 용지에 인쇄되었거나, 모바일 폰 화면에 표시되거나, 손상, 긁힘 또는 인쇄 품질 저하와 상관없이 모든 1D 또는 2D 바코드를 빠르게 캡처할 수 있습니다.
또한 전방향 스캔이 가능하므로 구매 고객과 매장 직원 모두에게 포인트-앤-슛(Point-and-Shoot) 방식의 간편함을 제공합니다.
Windows CE 5.0 Professional
Standard tool set for rapid application development.
Full Internet Explorer 6.0
Familiar platform for web-enabled applications.
Zebra PocketBrowser compatibility
Dramatically simplifies development of complex web-based solutions that integrate advanced functionalities such as barcode scanning, wireless connectivity and mobile printing.
320x240 QVGA colour display (MC17T only – backlit, resistive touch panel)
Enables rich content delivery for an enhanced customer experience.
Durability
Built to endure everyday drops to ensure reliable operation and investment protection.
Six-key intuitive interface
Easy to use for first time users of any age.
Sleek design
Easy to hold, minimizes user fatigue.
Wi-Fi IEEE 802.11 a/b/g
Provides wireless freedom for your customers and instant access to information for store associates.
Large capacity battery
Provides up to eight hours of continuous operation.
Zebra's Mobility Services Platform compatibility
Reduces cost, complexity, and effort associated with device management.
Customisable top cover
Professional branding reminds customers of your competitive identity and provides an additional revenue stream for promotional opportunities for manufacturers.
PHYSICAL CHARACTERISTICS
Dimensions : 2.3 in. H x 8.11 in. L x 3.2 in. W/ 5.9 cm H x 20.6 cm L x 8.1 cm W
Weight : 9.5 oz./270 g (with battery)
Display :
MC17A: 2.8 in. 320x240 QVGA
MC17T: 2.8 in. 320x240 QVGA backlit resistive touch screen
Keyboard : 6 fully programmable keys
Power Source : Rechargeable 2400 mAh Li-ION battery pack
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라키오스크 Zebra MK3100 8인치 마이크로키오스크 산업용키오스크 산업용PC 매뉴얼HION IT
동급 최강의 처리 능력
1GHz 프로세서, 1GB RAM/8GB 플래시 및 MicroSD 카드 슬롯을 통한 최대 32GB의 추가 메모리가 내장되어 있어 가장 복잡한 멀티미디어 애플리케이션에 적합한 능력을 제공하는, 동급 최강의 성능을 자랑하는 플랫폼입니다.
모든 바코드 캡처
라벨이 손상된 경우에도 종이 라벨(플라스틱 포인트 카드, 기프트 카드 또는 휴대 전화 화면)에 인쇄된 1D 및 2D 바코드를 스캔합니다.
메모리에서 주변 장치까지 필요한 모든 제품을 추가합니다.
사용자가 액세스할 수 있는 USB 포트 3개와 블루투스를 통해 비즈니스 요구 사항에 맞춰 MK3100을 사용자가 지정할 수 있으며, 까다로운 애플리케이션에 메모리도 추가합니다.
무선 또는 유선 프린터를 추가해 사용자가 영수증, 선물 등록 등을 인쇄할 수 있습니다.
직접 계산할 수 있는 카드 결제기와 데이터 입력을 단순화하는 키보드도 추가할 수 있습니다.
전체 화면 비디오 지원
풍부한 비디오 기반 정보의 전달로 고객과 직원과 좀 더 수월하게 연락할 수 있습니다.
사용 방법 및 제품 데모 비디오는 고객에게 부가 가치를 제공합니다.
교육 비디오는 판매 기술 향상에 도움을 주고 직원들이 새로운 항목에 대한 최신 정보를 습득합니다.
아울러 장치를 사용하지 않을 때 비디오 광고를 실행할 수 있는 기능은 광고 예산과 MK3100을 최대한 활용하는 데 도움을 줍니다.
모바일 바코드를 사용해 더욱 견고하고 개인적인 고객과의 관계 구축
컴퓨터 화면에서 전자 바코드를 스캔할 수 있어 거의 항상 고객이 보유한 개별 장치인 휴대 전화에 연결할 수 있습니다.
그 결과 편리함과 가치를 얻게 됩니다. 고객은 언제나 자신의 고객 카드, 쿠폰, 탑승권 등을 휴대하여 시간과 비용을 절약합니다.
손쉬운 배치
802.11a/b/g/n 및 이더넷 지원으로 기존 무선 또는 유선 네트워크에 쉽게 연결할 수 있습니다.
'n' 지원은 데이터 집약적인 멀티미디어 애플리케이션에 적합한 대역폭을 제공합니다.
'a'는 중요한 매장 무선 인프라에 사용할 수 있으므로 성능을 보존하기만 하면 됩니다.
PoE(Power-over-Ethernet)를 지원하여 모든 장치에 동일한 콘센트를 사용할 수 있습니다.
표준 VESA 장착으로 선반, 벽면, 전시 공간을 비롯한 모든 장소에 쉽게 장착할 수 있습니다.
OS 비의존형인 세련된 애플리케이션에 적합한 RhoElements 지원
운영 체제와 상관 없이 모든 장치에서 실행할 수 있는 한 가지 버전의 애플리케이션을 만들어 애플리케이션 개발 투자를 최소화합니다.
PHYSICAL CHARACTERISTICS
Dimensions : 8.87 in. H x 8.87 in. L x 2.17 in. W (22.5 cm H x 22.5 cm L x 5.5 cm W)
Weight : 1.9 lbs./0.86 kg
Display : 8 in./20.32 cm diagonal WVGA LCD; 800 x 480 pixels; resistive touch screen
Power : DC: 12v; Support for Power-over-Ethernet (802.3af and 802.3at)
Expansion Capabilities : User accessible MicroSD card slot; USB host
Data Ports : 1 Mini USB 2.0 host/client; 2 Mini USB 2.0 host; Ethernet RJ-45
Audio : Two integrated stereo speakers, microphone and headset jack
Scanner : Imager for capture of 1-D, 2-D, and PDF417 codes
Keys : Four programmable keys
SYMBOLOGY DECODE CAPABILITY
2D Imager Scanner Decode Capability :
1D : Code 39, Code 128, EAN-8, EAN-13, UPCEAN-128, UPCA, UPCE, UPC/EAN Supplementals, GS1 DataBar, Chinese 2 of 5, Code 93, Discrete 2 of 5, Interleaved 2 of 5 (including ITF14 and ITF 2 of 5), Codabar, ISBT 128
2D : PDF417, QR, Aztec, DataMatrix and MaxiCode
USER ENVIRONMENT
Operating Temp. : 32° to 104° F /0° to 40° C
Storage Temp. : -40° to 158° F /-40° to 70° C
Humidity : 5% to 85% (non-condensing)
Application Development Tools : RhoMobile Suite for web development; Enterprise Mobility Developer Kit (EMDK) for C for developing native C/C++ applications; Enterprise Mobility Developer Kit (EMDK) for .NET for developing managed .NET applications in C# or VB.NET
Management Tools : Rapid Deployment Client; Zebra Mobility Services Platform (MSP)
Ambient Light : Immunity Immune to normal indoor lighting up to 1600 Lux; immune to sunlight up to 86,000 Lux
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라PDA Zebra MC18 2D 산업용PDA 퍼스널쇼퍼 바코드PDA 매뉴얼HION IT
매장 방문 고객의 쇼핑 경험을 혁신적으로 개선한 지브라 MC18 산업용 PDA 퍼스널 쇼퍼로 쇼핑을 즐길 수 있는 고객 환경을 선사하십시오.
이 스마트폰형 첨단 모바일 컴퓨터는 고객에게 실시간 연결을 지원하여 진정한 가치를 선사합니다.
안드로이드 롤리팝 및 Zebra의 Mx(Mobility Extensions) 옵션으로 소비자용 안드로이드를 진정한 엔터프라이즈급 운영체제로 전환하는 일련의 기능이 추가되었습니다.
고객의 쇼핑 경험을 혁신적으로 개선
지브라 MC18 바코드 PDA 퍼스널 쇼퍼 시리즈 무선 리테일 모바일 컴퓨터는 새로운 차원의 우수한 고객 서비스와 향상된 지원 생산성 및 효율성을 제공합니다.
Zebra MC18 산업용 PDA 다목적 장치는 직원들에게 현장에서 고객의 질문에 답하고 재고 보충에서 가격 인하까지 재고를 오류 없이 효율적으로 관리하며 계산대 대기 시간을 단축하는 데 필요한 도구를 제공하기 위한 목적으로 설계되었습니다.
O/S 선택 (안드로이드 또는 윈도우즈)
널리 사용되는 모바일 운영 체제인 Android KitKat 또는 Windows Embedded Compact 7 최신 버전 중에서 선택하십시오.
그런 다음 기존 MC18 Windows 장치를 Android로 쉽게 업데이트할 수 있습니다.
거의 모든 바코드를 즉시 캡처할 수 있습니다.
지브라의 첨단 이미징 엔진은 바코드가 용지에 인쇄되었거나, 모바일 폰 화면에 표시되거나, 손상, 긁힘 또는 인쇄 품질 저하와 상관없이 모든 1D 또는 2D 바코드를 빠르게 캡처할 수 있습니다.
또한 전방향 스캔이 가능하므로 구매 고객과 매장 직원 모두에게 포인트-앤-슛(Point-and-Shoot) 방식의 간편함을 제공합니다.
PHYSICAL CHARACTERISTICS
Dimensions : 2.95 in. H x 8.58 in. L x 3.09 in. W/ 7.50 cm H x 21.80 cm L x 7.86 cm W
Weight : 10.6 oz./300 g (with battery)
Display : Color LCD; 4.0 inch 480x800 WVGA resolution; 16 bits/pixel RGB; LE D backlight; capacitive touch screen; Corning Gorilla Glass 3
Keyboard : 1 dedicated trigger key
Power Source : PowerPrecision+ 2725 mAh Li-Ion rechargeable battery
PERFORMANCE CHARACTERISTICS
Processor : TI OMAP 4430, Dual Core, 800MHz
Operating System :
Windows Embedded Compact 7
Microsoft Internet Explorer Embedded 7
Memory : 512 MB RA M/2 GB Flash or 1 GB RA M/4 GB Flash
Interface/Communications : USB 2.0 Client for Microsoft ActiveSync for service and maintenance
Light Source : Red LED Illumination with LED dot aim pattern
Scan Rate : Imaging rate: 30 Frames per second, 1280p x 800p
Ambient Light Immunity : Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED: 450 Ft. Candles (4,844 Lux) Sunlight: 8,000 Ft. Candles (86,111 Lux)
WIRELESS SECURITY
Wi-Fi Security Certification : Legacy, WPA and WPA 2
Authentication : None, EAP-TTLS (CHAP, MSCHAP, MSCHAPv2, PAP , MD5), EAP-TLS, PEAP (TLS, MSCHAPv2, GTC), LEAP and EAP-FAST (TLS, MSCHAPv2, GTC)
Encryption : WEP (40 or 104 bit), TKIP and AES
USER ENVIRONMENT
Operating Temperature : 32° to 104° F/0° to 40° C
Storage Temperature : 4° to 140° F/-20° to 60° C
Humidity : 40° C (RH 10% - 95%) non-condensing
Drop Specification : Withstands multiple 4 ft./1.2 m drops to vinyl tile over concrete
Tumble Specification : 1,000 0.5 m/1.64 ft. tumbles at room temperature
WIRELESS NETWORKING
WLAN : Wi-Fi IEEE 802.11a/b/g/n
WPAN : Bluetooth Class 1.5 2.1+EDR/ Bluetooth 4.0 with Bluetooth SMART technology
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC70 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC70 / TC75 산업용 PDA는 처음부터 기업용으로 제작된 전문가용 안드로이드 디바이스입니다.
업무를 효율적으로 처리하고 고객에게 향상된 서비스를 제공하려면 지속적인 통신과 정보 액세스가 가능한 엔터프라이즈급 핸드헬드 컴퓨터가 필요합니다.
그러나 직원들은 일반 소비자 기기와 같이 세련되고 사용하기 쉬운 장치를 원합니다.
지브라 TC70 바코드 PDA는 이 두 가지 요구를 모두 충족시킬 수 있습니다.
Mobility Extensions(Mx)는 AndroidTM 를 진정한 의미의 엔터프라이즈급 운영체제로 만들어줍니다.
Zebra TC70 안드로이드 기반의 산업용 PDA는 견고한 디자인으로 가장 까다로운 환경에서도 안정적으로 사용할 수 있으며 양방향 무전기로도 활용할 수 있습니다.
내장 스캐너와 카메라를 사용하면 어떠한 유형의 비즈니스 인텔리전스도 자동으로 캡처할 수 있습니다.
완벽한 액세서리 및 최신 기술 구성으로 현재뿐 아니라 미래 비즈니스까지 지원할 수 있으므로 높은 투자 수익률을 기대할 수 있습니다.
지브라 TC70은 소매, 제조 및 영업 분야에서 고객에게 보다 나은 서비스를 제공할 수 있습니다.
실질적인 경쟁 우위를 확보할 수 있습니다.
Mobility Extensions(Mx) 및 Mobility DNA와 함께 기업용으로 강화된 Android KitKat
모든 TC70/ TC75 산업용 PDA에는 안드로이드를 소비자급 운영 체제(OS)에서 진정한 엔터프라이즈급 OS로 변신시켜주는 Mobility Extensions(Mx)가 함께 제공되며, 엔터프라이즈급 보안과 장치 관리가 가능하고 엔터프라이즈급 데이터 캡처 기능을 지원합니다.
완벽한 성능뿐 아니라 간편한 Mobility DNA로 모빌리티 효율성을 향상시킵니다.
이 모빌리티 솔루션은 Zebra 모바일 기기에 통합된 상용, 최종 사용자 앱, 강력한 관리 유틸리티 및 간편한 앱 개발 도구를 기반으로 가장 빠르고 간편한 모바일 성능을 지원합니다.
데이터 입력 유연성을 극대화 하기위한 업계 최고의 듀얼 모드 터치 패널
맨 손가락 및 장갑 낀 손가락 또는 맨 손가락 및 스타일러스 등 선호하는 데이터 입력 모드를 선택할 수 있어, 선명한 서명 캡처에 이상적입니다.
데이터 입력 방법을 전환할 때마다 설정을 조정해야 하는 경쟁사 장치와는 달리, 이 지능형 4.7인치 디스플레이는 필요에 따라 자동으로 조절됩니다.
업계 최고의 포괄적인 오디오 기능으로 새로운 차원의 음성 유연성 지원
대중적인 스마트폰의 음량을 최대 4배까지 증폭하고 소음 제거 기술을 제공하는 TC70/ TC75 PDA는 모든 통화마다 양쪽 사용자에게 깨끗한 오디오 품질을 선사합니다.
Workforce Connect PTT(Push-to-Talk) Express 및 Pro 지원으로 현장에서 동료와 빠르게 연결될 수 있으며 관리자 및 다른 사무 지원 인력과의 협업을 통해 고객 요구에 신속하게 대응할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 6.3 in. L x 3.3 in. W x 1.1 in. D/ 161 mm L x 84 mm W x 28 mm D
Weight : 13.3 oz./376 g
Display : 4.7 in. High Definition (1280 x 720); exceptionally bright, outdoor viewable; optically bonded to touch panel
Imager Window : Corning Gorilla Glass 2
Touchpanel : Dual mode capacitive touch with stylus or bare or gloved fingertip input (conductive stylus sold separately); Corning Gorilla Glass 2
Backlight : LED backlight
Power : PowerPrecision: Li-Ion 3.7 V, 4620 mAh
Expansion Slot : User accessible 32 GB microSD slot with SDHC and SDXC support
Network Connections : USB 2.0 High Speed (host and client); WLAN
Notification : Audible tone; multi-color LEDs; vibration
Keypad : On-screen keypad
Voice and Audio : Three microphone support with noise cancellation; vibrate alert; speaker; Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU : 1.7 GHz dual core processor
Operating System : AndroidTM AOSP 4.4.2 (KitKat)
Memory : 1 GB RAM / 8 GB Flash pSLC
WIRELESS PAN
Bluetooth Bluetooth v4.0 (Bluetooth® Smart technology)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
복수 사용자가 로그온 방식을 통해 사용자는 여러대의 태블릿 중 어느 태블릿을 사용하더라도, 각자 업무 수행에 필요한 책임 범위 및 접근 권한에 따라 애플리케이션과 기능만 이용할 수 있습니다.
관리자용 데시보드
매장을 원할하게 운영하는데 필요한 모든 기능이 관리자의 손끝에 달려 있습니다.
판매지원
고객이 구매 결정을 내리는 데 필요한 모든 정보를 실시간으로 제공 합니다.
모바일 POS
고객은 구입 결정을 내리는 바로 그 순간에 비용을 지불할 수 있습니다.
따라서 카운터에서 줄을 서서 기다릴 필요가 없고, 기다리는 동안 마음이 바뀔까봐 걱정할 필요도 없습니다.
멀티미디어 교육
ET1을 활용하여 매장 내에서 즉각적이고 손쉬운 직원 교육이 이루어지며 직원들은 신제품과 현재 진행중인 프로모션에 대해 고객에게 바로 설명할 수 있습니다.
확장성
필요할 때마다 새로운 기능을 추가할 수 있습니다.
블루투스(Bluetooth) 무선 연결과 통합 확장 포트를 사용하여 카드리더기(MSR : magnetic Stripe Reader)나 휴대용 프린터 또는 CAC 카드 리더기 등 주변 기기를 ET1에 손쉽게 연결할 수 있습니다.
고성능
지브라솔루션은 다양한 운영체제 환경을 관리하기 쉽도록 Rho Elements 를 개발하였습니다.
이 HTML5 애플리케이션 개발 프레임워크를 사용하면, 하나의 애플리케이션을 여러 버전으로 개발해서 관리해야하는 번거로움과 복잡성이 사라지며, 간편한 배포, 풍부한 기능 및 비용절감의 효과를 누릴 수 있습니다.
즉 지브라 디바이스가 윈도우 모바일(Windows Mobile), 윈도우 CE(Windoes CE) 또는 안드로이드 중 어떤 운영체제를 사용한든 상관없이 애플리케이션을 한번만 제작하서 화면크기에 상관없이 여러 모바일 디바이스에서 사용할 수 있습니다.
지속 가능한 배터리
배터리가 고갈될 경우 메모리 백업 배터리를 통해 진행중인 애플리케이션 상태 및 데이터 입력을 15분동안 그대로 유지한 채 배터리를 교체할 수 있습니다.
사용 편의성
ET1은 손에 들었을때 가볍다고 느껴지고 장시간 휴대하여도 전혀 불편하거나 피로감이 느껴지지 않도록 특수 설계 되었습니다.
또한 센서가 주변 조명을 자동 감지하여 그에 맞게 백라이트를 조절하므로 사용자는 조명이 다른 지역을 이동하더라고 설정을 바꾸지 않아도 화면을 보는데 전혀 지장이 없습니다.
애플리케이션이 세로보다 가로방향으로 사용하거나 전환할 경우 간단하게 회전하기만 하면 됩니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.14 in. H x 0.98 in. D x 8.82 in. W (130.5 mm H x 25.0 mm D x 224.0 mm W)
Weight : 1.4 lbs./.63 kg
Display : 7 in. capacitive; 1024 x 600; 350 NIT; Corning® Gorilla® Glass
Keypad Options : Virtual; Bluetooth®
Expansion Capabilities : User accessible Micro SDHC card slot (up to 32GB); expansion module port
Expansion Modules : Integrated expansion port for ‘snap-in’ peripherals for Zebra and third party peripherals
Connectivity : Two USB interfaces: 1 USB 2.0 OTG connector (docking connector) and 1 USB 2.0 Host connector (expansion module port); HDMI out; communication via cradle and expansion ports; USB 2.0 host via expansion module
PERFORMANCE CHARACTERISTICS
CPU : Dual core 1GHz each plus graphics accelerator
Operating System : Android 2.3.4
Memory : 1GB RAM,4GB Flash plus 4GB microSD (total of 8GB flash memory); user accessible microSD card slot (supports up to 32GB)
COMMUNICATIONS
WLAN : 802.11a/b/g/n
WPAN : Bluetooth 2.1 + EDR; integrated antenna
GPS : Autonomous GPS
DATA CAPTURE
Rear Camera ; For barcode scanning and image capture: 8MP auto-focus camera with user controllable LED flash, illumination and aiming; captures 1D and 2D bar codes, photographs, video, signatures and documents
Front Camera : Optimized for video collaboration and low lighting conditions
Video : 720p video
Readability : 9,000 ft. candles
POWER
Battery : 4620 mA rechargeable Smart Li-Ion; user replaceable; rapid resume
Battery User Profile : Ample power for a full shift
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
지브라PDA Zebra MC3200시리즈 안드로이드젤리빈 MS임베디드컴펙트7 2D 산업용PDA 바코드PDA 매뉴얼HION IT
지브라 MC3200 모바일 컴퓨터는 재고관리의 생산성과 안정성을 재 정의하는 업계 최고의 차세대 산업용 PDA로 고객의 니즈를 충족시키는 다양한 옵션이 추가되었습니다.
귀사의 비지니스에 적합한 운영체제를 선택할 수 있습니다.
(안도로이드 젤리빈 또는 마이크로소프트 임베디드 컴펙트 7 (Android™ Jelly Bean 또는 Microsoft™ Embedded Compact 7)
고급 1D 레이저 또는 1D/2D 이미저 스캔 엔진을 선택하면 작업자들은 어떠한 조건에서도 쉽게 바코드를 캡처할 수 있습니다.
고객 만족도와 비즈니스 성공은 재고 관리를 얼마나 효율적으로 정확하게 할 수 있는지에 달려 있습니다.
지브라 MC3200 시리즈 산업용 PDA는 견고하고, 경량의 아래 세 가지 모델을 제공으로 합니다.
- 일자형
- 건스타일
- 회전형
Android Jelly Bean 및 Microsoft Embedded Compact 7 지원
귀하의 비즈니스와 작업자들의 필요에 맞게 업계에서 많이 사용하는 운영 체제를 선택할 수 있습니다.
또한 Premium CE와 Android에서 운영 체제간의 교체가 가능해 나중을 위한 투자로 활용할 수 있습니다.
기업용 Android 성능을 강화하는 Zebra 익스텐션(Mx)
Android에 통합된 Mx는 Andriod를 소비자용 운영 체제(OS)에서 엔터프라이즈급 OS로 탈바꿈시키기 위해 보안, 디바이스 관리 및 엔터프라이즈 데이터 캡처 등의 기능을 추가합니다.
가장 까다로운 애플리케이션을 지원하는 강력한 성능
듀얼 코어 1GHz 프로세서에 2 또는 4GB 플래시 메모리를 선택할 수 있고 최대 32GB의 SD 메모리까지 추가할 수 있어 여러 복잡한 애플리케이션을 동시에 실행할 수 있습니다.
PHYSICAL CHARACTERISTICES
Dimensions :
Straight Shooter: 7.49 in. L x 3.22 in. W x 1.78 in. D (190.4 mm L x 81.9 mm W x 45.2 mm D)
At grip: 2.40 in. W x 1.35 in. D (60.9 mm W x 34.2 mm D)
Rotating Turret: 8.37 in. L x 3.22 in. W x 1.57 in. D (212.6 mm L x 81.9 mm W x 40.0 mm D)
At grip: 2.40 in. W x 1.35 in. D (60.9 mm W x 34.2 mm D)
Gun: 7.59 in. L x 3.18 in. W x 6.5 in. D (192.7 mm L x 80.8 mm W x 166 mm D)
Weight (including strap, stylus, and battery):
Straight Shooter: 12.88 oz./365 g
Rotating Turret: 13.13 oz./372 g (with standard battery)
Gun: 18.0 oz./509 g (with extended battery)
Display: 3.0 in. color (TFT) (320 x 320) display
Touch Panel: Chemically strengthened glass, resistive touch
Backlight: LED Backlight
Keypad Options: 28-key Numeric, 38-key Shifted Alpha, 48-key Alpha-Numeric
Expansion Slot: User accessible Micro SD slot; (supports up to 32 GB microSDHC)
Notifications: LEDs, audio
Audio: Speaker, microphone and headset connector (2.5 mm jack)
PERFORMANCE CHARACTERISTICS
CPU: Dual core 800 MHz OMAP4 Processor (Standard) or Dual core 1 GHz OMAP4 processor (Premium)
Operating System: Choice of Windows Embedded Compact 7.0 (Standard or Premium) or Android 4.1 (Premium)
Memory: 512 MB RAM/2 GB Flash (Standard) 1GB RAM/4 GB Flash (Premium)
Power: PowerPrecision Li-Ion batteries
Two options: High Capacity 5200 mAh or Standard Capacity 2740 mAh (not available on gun form factor)
DATA CAPTURE
Scanning: 1-D Laser 1-D Laser SE965 Standard Range with Adaptive Scanning (all models); SE4750-SR Standard range and SE4750-MR Medium Range 1-D/2-D scanners (straight shooter & gun models only).
VOICE AND AUDIO:
PTT (client included); high-quality speakerphone; wireless (Bluetooth) and wired headset support; PTT will support headset and speakerphone mode.
NETWORK COMMUNICATIONS
I/O: USB 1.1 Full Speed Host/ Client or RS232
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
Similar to 지브라스캐너 Zebra CS3000 1D 포켓타입 모바일스캐너 매뉴얼 (20)
Zebra의 혁신적인 ZXP 시리즈 8 재전사 (Retransfer) 카드프린터 계열과 Windows 인증 드라이버 및 ZMotif SDK 소프트웨어를 사용하여 필요할 때 완벽한 화질로 선명한 컬러 카드와 단색 카드를 즉석에서 발급하십시오. 이 재전사 카드프린터는 스마트 카드와 같이 표면에 요철부가 있는 카드 인쇄, 높은 이미지 품질이 요구되는 분야 또는 내구성 및 마모 내성이 개선된 카드 인쇄에 적합합니다.
혁신적인 재전사 (Retransfer) 인쇄 공정을 사용하는 지브라 ZXP 시리즈 8 은 일반 신분증 사진보다 광택이 많은 잡지 인쇄물처럼 보이는 영상과 그래픽으로 고품질 포토 ID 카드를 제작하는 데 필요한 최상의 인쇄 해상도를 동급 최고 속도로 제공합니다. 프린터에 모듈형 설계를 채택하고 있어 필요에 따라 다양한 인코딩 옵션을 유연하게 추가할 수 있습니다. 단면 또는 양면 코팅도 지원합니다.
탁월한 성능
ZXP 시리즈 8은 가로 모드로 이미지를 인쇄하는 특허 받은 양면 동시 전사 공정을 채택하여 동종 최고의 인쇄, 인코딩 및 코팅 성능을 제공함으로써 품질 저하 없이 처리량과 편평도를 향상시킵니다. Zebra의 이미지 처리 기술을 기반으로 브랜드 사양과 품질을 충족하는 사진 품질 컬러와 해상도를 얻을 수 있습니다. 이 시리즈는 내부와 외부를 모두 견고하게 설계하여 수리 비용이 절감되고 가동 중단 시간이 단축됩니다.
간편한 프린터 통합 및 관리
ZMotif XML 기반 드라이버와 SDK를 채택하여 간편한 설치 및 빠른 배포에 적합한 드라이버와 관리 유틸리티 도구를 갖춘 엔터프라이즈급 카드프린터 입니다. Microsoft® Windows® 인증 드라이버가 기존 소프트웨어 인프라에서 적용 호환성, 사용 용이성 및 투자 보호를 보장합니다. USB 및 이더넷 연결 인터페이스가 표준으로 제공되며, 지역 네트워크 또는 무선 시스템에 쉽게 통합되는 WiFi 옵션도 제공합니다.
보안 기능
ZXP 시리즈 8 에는 단면 또는 양면 코팅용 라미네이터 모듈 옵션 등 보안 강화에 유용한 많은 기능을 포함하고 있습니다. 전사 필름이 내장된 사기 방지 수단 조작 증거를 보여주며, 잠금형 케이스와 카드 공급기 옵션이 무단 사용을 방지할 수 있습니다. 이 시리즈에는 Kensington® 잠금장치 슬롯도 포함됩니다.
PRINTING
Dye sublimation retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
Photo quality image
Over-the-edge printing on standard CR80 media
* Print speed based on click to drop, average print coverage, with USB connectivity, card per hour (cph).
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card reject hopper (30 mil)
100 card output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows® certified drivers
Kensington physical lock capable
LAMINATOR SPECIFICATIONS
Single-or dual-sided lamination option (with dual-sided printer only)
180 cards per hour dual-sided printing and dual-sided lamination
GSA FIPS 201 approved (dual-sided lamination)
Uses Zebra True Secure i Series laminates only
Laminate for the top and bottom sold separately
Custom-coded laminates available
CARD SPECIFICATIONS
Card thickness: 30 ? 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite***
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)***
Technology cards: contact and contactless smart cards, UHF cards***
COMMUNICATIONS INTERFACES
USB V2.0
10/100 Ethernet (encoding over Ethernet requires ZBR PS-300 Ethernet-to-USB Device Server)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZXP 시리즈 7 열전사 단면인쇄 양면인쇄(옵션) 카드프린터 매뉴얼HION IT
지브라 ZXP7 시리즈 열전사 카드프린터로 대량발급 어플리케이션에서 사진과 유사한 품질의 카드를 인쇄합니다.
Zebra ZXP7 시리즈 카드프린터는 최신의 기술에 의해 대량으로 고품질의 카드를 빠르게 인쇄하며, 총 소유비용(TCO)을 낮춤으로써 사용자에게 뛰어난 가치를 제공합니다.
또한 정밀한 컬러 제어로 항상 선명한 카드를 인쇄합니다.
ZXP 시리즈 7 카드프린터는 혁신적인 디자인을 도입하였습니다.
지브라 ZXP 시리즈 7 카드프린터는 카드의 두께에 따라 자동으로 조정되고 간편하게 리본을 로딩할 수 있습니다.
색상으로 구분된 안내와 선명한 LCD 제어판으로 누구나 쉽게 사용할 수 있으며, 다양한 인코딩 및 연결 옵션 중에서 선택하면 됩니다.
그리고 특별한 보안 또는 내구성이 필요한 카드의 경우에는 폐기물 없는 단면/양면 라미네이트를 사용할 수 있습니다.
잠금 메카니즘은 프린터와 미디어를 보호하며 필요에 따라 소프트웨어로 작업을 추적하고 제한함으로써 보안을 더욱 강화할 수 있습니다.
성능 : 카드마다 필요한 방식으로 작동
ZXP 7 시리즈 카드프린터는 오늘날의 까다로운 비즈니스 니즈를 충족시킬 수 있도록 제작되었습니다.
광범위한 환경과 어플리케이션에서 바로 사용할 수 있는 강력한 디자인
사진 인쇄 기술을 적용하여 사진과 유사한 인쇄 품질 및 색의 농도 생성
풀전사(edge-to-edge)카드 인쇄
라미네이터로 카드의 보안 보장 및 이미지 수명 연장
생산성 : 빠른 속도와 간편한 유지보수
ZXP 7 시리즈 카드프린터는 빠른 인쇄 속도로 생산성을 향상시키고 대기 시간을 줄입니다:
빠른 click-to-drop 및 배치 인쇄 속도
최대 세가지 작업(인코딩, 인쇄, 라미네이팅)의 동시 처리로 가장 빠른 처리량 제공
보다 빠른 인쇄를 위해 개발된 ix Series™ 리본
양면 동시 라미네이팅
용이한 통합 및 간편한 유지보수가 가능합니다:
높은 미디어 용량
리본과 라미네이트 롤 사이즈 동일
리본 로딩 및 운영 간소화
Windows® 드라이버, ZMotif™SDK, 빠른 설치를 위한 네트워킹 옵션
적용성 : 현재 및 미래의 비즈니스 니즈 충족
ZXP 7 시리즈 카드프린터는 진정한 유연성을 제공합니다.
필요시 옵션을 구매하여 카드 인쇄 어플리케이션 포트폴리오 확장 및 투자 관리를 동시에 할 수 있습니다.
옵션 :
단면 또는 양면 인쇄
다양한 인코딩 및 연결 옵션
폐기물 없는 단면 또는 양면 라미네이트
물리적 보안 잠금 메커니즘
적용성 및 소프트웨어를 통한 제어:
ZXP Toolbox를 통해 프린터, 드라이버, 소프트웨어 설정에서부터 관리, 진단까지 고급 제어 기능 제공
고급 보안 기능으로 사용자별 기능 및 권한 설정에 필요한 관리 유연성 제공
소프트웨어 개발자는 ZMotif SDK를 사용하여 고급 기능의 간편한 통합 또는 맞춤형 인쇄 어플리케이션 개발 가능
비용 효율성 : 카드 당 비용을 최소화하도록 설계된 소모품
ZXP 7 시리즈 카드프린터는 Zebra True Colours® ix Series 리본과 Zebra True Secure™ i Series™ 라미네이트를 함께 사용하도록 설계되었습니다.
대용량 리본은 롤 당 더 많은 이미지를 제공함으로써 비용을 줄이고, 보다 빠른 속도로 고품질의 이미지를 인쇄할 수 있는 개선된 포뮬레이션을 자랑합니다.
대부분의 리본 타입은 모든 인쇄 업무의 니즈를 충족시키기 위해 두 가지 사이즈로 제공합니다.
Zebra True Secure 라미네이트는 카드 위조 위험을 줄이고 강력한 보안 카드의 수명을 연장시켜 줍니다.
독창적인 라미네이트 디자인은 라미네이트의 Carrier, Backing, Liner 를 제거함으로써 폐기물을 급격히 줄여 줍니다.
또한 특수 설계된 카트리지로 라미네이트를 간단하게 교체할 수 있습니다.
리본과 라미네이트 모두 지능형 미디어 기술을 활용하여 프린터를 자동으로 감지하고 보정합니다.
STANDARD FEATURES
300 dpi/11.8 dots per mm print resolution
USB 2.0 and Ethernet 10/100 connectivity
Microsoft® Windows Certified drivers
200-card capacity feeder (30 mil)
15-card reject hopper (30 mil)
100-card output hopper (30 mil)
Single-card feed capability
ix Series intelligent media technology
21-character x 6-line LCD operator display with configurable soft keys - Kensington® physical lock slot
Two-year unlimited warranty on printer and printhead
OPTIONAL FEATURES
Single-sided laminator
FIPS 201 compliant dual-sided laminator
Lockable enclosures and card feeder**
EXtended product warranty programs
802.11b/g wireless connectivity
1D barcode scanner
Duo-Print upgrade kit
NOTE: FIPS201 compliant dual-sided laminator is only for North America.
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11b/g wireless option
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
초고속으로 사진처럼 생생한 이미지 품질 구현
보안성이 뛰어난 애플리케이션 요구를 충족하도록 설계된 ZXP 시리즈 9™을 사용하면 사진 품질의 카드를 빠르고 안정적으로 생성 할 수 있습니다. 안정성을 자랑하는 ZXP 시리즈 9 카드프린터는 사진과 그래픽 인쇄에 적합하며 지브라의 Color Predictive Technology (색상 예측 기술)를 채택하고 있습니다. 이 기술은 지속적인 모니터링과 프린터 설정 즉시 적용을 통해 최고 수준의 품질을 자동으로 생성합니다. 본 재전사 프린터 제품은 스마트 카드와 같이 표면이 고르지 않은 경우에도 내구성이 뛰어난 풀전사 카드 제작이 가능합니다.
탁월한 인쇄 품질과 성능
ZXP 시리즈 9 재전사 카드프린터는 탁월한 품질과 안정성, 빠른 처리 속도, 더 많은 옵션과 귀중한 비용 및 시간 절감 효과를 제공합니다.
고품질 카드를 빠른 속도로 인쇄하며, 동급 최강의 재전사 및 라미네이트 기술로 강화된 보안을 보장합니다.
유연하고 간편한 작업
ZXP 시리즈 9 카드프린터를 통합 및 관리하는 데 필요한 도구를 제공하는 종합적인 소프트웨어 제품군을 사용하여 맞춤형 카드 디자인을 생성할 수 있습니다. 사용자 선택 가능 인쇄 품질 모드는 더 많은 옵션과 제어 기능을 제공합니다. 특허받은 Zebra의 양면 동시 재전사 인쇄 설계로 인쇄 도중 프린터가 카드를 기계적으로 뒤집을 필요가 없습니다. 이 기술 덕분에 기계적 오류나 카드 걸림 현상이 감소합니다. 그리고 Print Touch™ 및 QR 코드 기술이 즉석에서 관련 정보와 지원을 제공합니다.
보안 기능 추가
특수 홀로그램 라미네이트와 함께 암호화, 프린터 호스트 인증 등의 프린터 기반 보안 기능으로 보안을 한층 더 강화하고 불법 위조, 변조 및 복제를 방지할 수 있습니다. 지브라는 카드 위조 방지를 위해 전용 카드 보안 기능이 필요한 맞춤형 홀로그램 라미네이트를 지원합니다. ZXP 시리즈 9는 무단 사용을 방지하기 위한 카드 피더 및 인클로저와 함께 선택적으로 잠금 기능도 라미네이터에 탑재할 수 있습니다.
PRINTING
Dye diffusion retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
User-selectable print modes: standard and fine
Photo-quality images
Over-the-edge printing on standard CR80 media
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card capacity reject hopper (30 mil)
100 card capacity output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows certified drivers
Kensington physical lock capable
CARD SPECIFICATIONS
Card thickness: 30 - 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite**
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)**
Technology cards: contact and contactless smart cards, UHF cards**
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11 b/g wireless connectivity
ELECTRICAL
Auto-switching single-phase AC power
100V~240V AC and 50-60 Hz
PHYSICAL
Height (w/ card hoppers): 13.2”/334 mm
Width (w/ card hoppers): 18.75”/476 mm
Width (w/ card hoppers, w/ laminator): 30.75”/781 mm
Depth: 20.4”/519 mm
Weight (printer only): 27.5 lbs./12.5 kg
Weight (printer, laminator): 44 lbs./20 kg
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410RFID ZT420RFID 열전사감열 산업용 RFID프린터 매뉴얼HION IT
Zebra ZT400 시리즈 RFID 프린터 / 인코더는 혹독한 환경 속에서 안정적인 인쇄와 인코딩에 필요한 고급 기능을 제공합니다.
RFID 라벨링의 가격대비 성능을 선도하는 지브라의 ZT400 RFID 프린터는 여러 산업분야의 다양한 애플리케이션을 지원합니다.
지브라 ZT400 RFID는 RZ™ 시리즈보다 처리량 및 극한 환경에서 생산성을 향상시키는 견고한 금속 프레임을 특징으로합니다.
ZT400 시리즈는 4인치 ZT410 및 6인치 ZT420 은 0.6 "/ 16 mm의 작은 라벨을 인쇄 및 인코딩 할 수 있으며, 소형 라벨 애플리케이션에 대한 정확한 등록으로 최대 600 dpi를 인쇄 할 수 있습니다.
직렬, USB 2.0, 블루투스 및 10/100 이더넷 통신을 비롯한 다양한 표준연결 옵션은 물론 802.11 a / b / g / n 보안 무선 및 병렬 옵션도 제공합니다.
Integrated ThingMagic® RFID reader/encoder
RFID system is available as a factory- or field-installable option
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Adaptive encoding technology automatically eliminates complex RFID placement guidelines
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Auto-tag calibration for label lengths of 2” or greater
Optimised for throughput of both small and large labels
RFID job-monitoring tools track RFID performance
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
RFID ZPL® commands provide compatibility with existing Zebra RFID printers
RFID
Integrated RFID system is user-upgradable in the field
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Automatically eliminate complex RFID placement guidelines with adaptive encoding technology
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Track performance with RFID job-monitoring tools
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
Integrated ThingMagic® RFID reader/encoder
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory :
256 MB RAM memory (4 MB user available)
512 MB Flash memory (64 MB user available)
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm
Media Sensors : Dual media sensors: transmissive and reflective
Media Characteristics : Media web width (label and liner)
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410 ZT420 열전사감열 산업용 바코드프린터 매뉴얼HION IT
지브라프린터 ZM400 후속 모델로 지브라 ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 다양한 어플리케이션에서 장시간 사용이 가능 하도록 설계된 뛰어난 산업용프린터로 귀사의 중요 업무를 효율적으로 지원 할 것입니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 현장에서 입증된 Z Series의 신뢰성을 바탕으로 인쇄속도 인쇄품질 및 네트워크 연결 옵션을 더욱 개선하였습니다.
또한 사용자 편의성을 고려하여 디자인된 ZT400 시리즈 바코드프린터는 직관적인 아이콘 기반의 LCD 그래픽 사용자 인터페이스를 제공하며 소모품을 간편하게 장착할 수 있습니다.
통신연결은 USB, 직렬, 이더넷 및 블루투스 포트를 기본으로 제공하며, 확장된 RFID 기능은 더욱 강력한 추적 능력과 상세한 가시성을 제공합니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 4인치, 6인치 모델로 제공되며, 귀사의 바코드프린터 투자에 현재와 미래의 요구를 항상 충족시킬 수 있도록 광범위한 고급 기능을 표준으로 제공합니다.
외관은 전체가 금속 프레임과 접이식 도어로 구성되어 공간이 제한된 환경에 적합하도록 설계되었습니다.
강력한 멀티플렛폼 SDK (Software Development Kit)와 소프트웨어 어플리케이션이 결합된 혁신적 운영체제인 제브라의 Link-OS 환경을 통해 전세계 어디에서나 통합, 관리, 유지보수가 용이합니다.
ZT410
Maximum print width : 4 인치
Maximum ribbon length : 450 m
Maximum print speed ; 14 ips
User Interface : LCD
Print resolution : 203, 300, 600 dpi
Printer control language : ZPL, EPL, others
ZT420
Maximum print width : 6 인치
Maximum ribbon length : 450 m
Maximum print speed ; 12 ips
User Interface : LCD
Print resolution : 203 and 300 dpi
Printer control language : ZPL, EPL, others
어플리케이션 유연성
폭넓은 범위의 사용가능한 미디어와 미디어 배송 옵션으로 프린팅 준비성 확대
최종 사용자가 설치 가능한 미디어 핸들링 옵션으로 현재와 미래의 비지니스 요구에 맞게 프린터 커스터마이징 가능
직렬, USB, 이더넷 및 블루투스의 기본 제공 및 기타 연결 옵션을 위한 두개의 개방형 미디어 슬롯
설치 및 사용 용이성을 고려한 확장된 RFID 기능
고해상도 인쇄기능으로 소형 바코드라벨 어플리케이션에서 고품질의 결과물 보장
간편한 통합
USB 호스트 포트의 장착으로, 미러링을 통한 USB 플래시 드라이브 데이터의 간편한 전송과 확장된 매핑 드라이브 메모리 기능을 활용하여 간단한 프린터 설정 가능
Virtual Device 앱을 통해 ZPL 및 EPL 이외 주요 래거시 및 경쟁사 프린터 언어를 지원함으로 미래에 대비한 투자 가능
용이한 조작
Dynamic QR 코드로 프린터 오류의 신속한 해결을 위한 온디맨드, 웹 기반의 지원 제공
Print Touch 를 지원하는 Link-OS 프린터는 NFC(Near Field Communicatrion)를 사용하여 웹 페이지 실행, 사용법에 관한 동영상과 제품 지원에 관한 지브라의 광범위한 지식 기반에 편리하게 엑세스
미디어 및 리본 경로의 조명으로 어두운 환경에서도 프린터 내부 확인 용이
간단한 관리
지브라의 Link-OS 환경으로 어느 곳에서나 프린터의 모니터, 관리 및 유지보수가 가능한 진보된 기능 제공
Clould Connect를 이용하여 인쇄 및 기기 관리를 위한 Link-OS 지원 프린터와 클라우드의 안전하고 직접적인 상호 작용 가능
Profile Manager를 통해 전세계 어디에서든 단일 프린터, 복수의 프린터, 또는 네트워크상의 모든 Link-OS 지원 프린터를 편집 및 관리
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory : 256 MB SDRAM/ 512 MB on-board linear Flash memory
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm per second
Media Sensors : Dual media sensors - transmissive and reflective
Media Characteristics - Media web width (label and liner):
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT220 ZT230 열전사감열 산업용 바코드프린터 매뉴얼HION IT
S4M 바코드프린터의 장점을 바탕으로 고객으로부터의 다양한 의견 수렴을 통하여 출시된 새로운 ZT200 시리즈 바코드프린터는 우수한 공간 절약형 디자인, 손쉬운 설정, 직관적인 사용자 운영 그리고 편리한 서비스 및 유지보수 등의 특징을 가지고 있습니다.
ZT200 바코드프린터 시리즈는 바코드 기술의 신규 도입부터 기존 바코드프린터 모델의 업그레이드까지, 다양한 라벨링 어플리케이션에 적합한 탁월한 선택이며, 이 혁신적인이고 새로운 프린터는 많은 사용자에게 혜택을 제공할 것입니다.
지브라 ZT200 바코드프린터 시리즈는 효율적인 디자인과 작은 크기로 Stripe와 S4M 모델 보다 물리적 공간을 더욱 작게 차지하며 최소한의 운영자 교육, 주요 구성요소에 대해 공구가 필요없는 유지보수 서비스를 제공합니다.
또한 기존 시스템과의 완벽한 호환성을 제공하기에 IT 담당자는 다운타임을 최소화하면서 새로운 프린터를 운영할 수 있습니다.
ZT220
지브라의 가장 저렴한 탁상용 프린터
충격에 강하고 견고하여 오래 사용할 수 있는 폴리머 케이스
300m 리본 용량
사용자가 간단하게 사용할 수 있는 3개의 조작 버튼
바코드라벨의 교체가 빈번하게 발생하는 작업에 이상적입니다.
ZT230
견고한 금속 케이스로 오래 사용할 수 있습니다.
가동 시간을 늘리고 리본 교환 횟수를 줄이기 위한 450m 리본 용량
화면 표시 내용이 그래픽으로 처리되어 바코드프린터 설정 및 제어가 편리함
바코드라벨의 교체가 좀 더 빈번하게 발생하는 작업에 이상적입니다.
지브라 ZT200 바코드프린터 시리즈는 고객의 다양한 의견과 고객의 프린팅 어플리케이션, 진화하는 비즈니스 요구와 운영상의 문제점에 대한 이해를 바탕으로 설계된 최고의 제품으로, ZT200 시리즈는 동급 프린터에서 일반적으로 찾을 수 없는 탁월한 성능과 특징을 제공합니다.
공간 절약형 디자인
제한된 좁은 공간에 적합한 작은 설치 공간과 효율적인 설계
업무 공간을 최대화하며 좁은 공간에도 적합한 독특한 접이식 도어의 공간 절약형 디자인(개방 공간 102mm/4” 필요)
빠른 설치 및 통합
구형 Stripe 및 S4M 모델의 완벽한 후속 모델
다중 연결 옵션: 병렬, 10/100 이더넷, 802.11b/g/n 무선
아이콘 기반의 상태 LED로 프린터 상태를 쉽고 즉각적으로 파악
직관적이고 손쉬운 미디어 장착
복잡한 소모품 장착을 간소화하는 측면 장착 디자인
처음 사용자도 리본 및 미디어를 장착할 수 있도록 색깔로 표현된 시각적 안내 제공
미디어를 통해 보이는 발광형 이동식 센서로 간단하게 센서 위치 조정
인쇄 품질
미세 조정으로 더 나은 인쇄 정확도를 보장하도록 제작
선명하고 깔끔한 텍스트 및 바코드 - 좁은 미디어에서도 가능
Zebra 신뢰성과 내구성
경공업 및 상업 환경에 적합하도록 제작
Energy Star® 인증
최소한의 유지보수로 최적의 성능을 제공하도록 설계된 드라이브 시스템
간소화된 사용성
플래턴과 프린트헤드를 도구없이 쉽게 제거함으로써 간단히 청소와 교체 가능
손쉽게 교체 가능한 연결 옵션으로 신속한 프린터 교체 및 업그레이드 가능
일반적인 도구 3개로 기본 서비스 가능
PRINTER SPECIFICATIONS
Resolution ;
8 dots per mm/203dpi
12 dots per mm/300dpi (optional)
Memory : Standard / 128MB flash (58MB user-available), 128MB DRAM
Print width ;
104mm/4.09"
Minimum: 0.75"/19.4mm
Print speed : 152mm/6" per second
Media sensors : Transmissive and reflective sensors
Media characteristics ;
Maximum label and liner width : 114mm/4.5"
Maximum non-continuous label length : 991mm/39"
Media width : 19.4mm/0.75" to 114mm/4.50"
Print length ;
203dpi : 3,988mm/157"
300dpi : 1,854mm/73"
Maximum media roll size ;
203mm/8.0" O.D on a 76mm/3.0" I.D. core
152mm/6.0" O.D. on a 25mm/1.0" I.D. core
Media thickness : 0.076mm/0.003" to 0.25mm/0.010"
Media types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZE500시리즈 열전사감열 RFID프린터엔진 오토라벨러엔진 바코드프린터엔진 매뉴얼HION IT
지브라의 새로운 ZE500™ 시리즈는 OEM 바코드 인쇄 엔진에 대한 혁신적인 접근 방식을 채택했습니다.
Zebra ZE500 시리즈 바코드 프린터 엔진은 광범위한 설문 조사를 활용하여 디자인, 사용 편의성, 서비스 및 통합 용이성에 중점을 두고 중요한 자동라벨링 업무에 중단없이 작동하도록 설계되었습니다.
우아한 디자인의 ZE500 바코드 프린터 엔진은 유지 보수를 단순화하고 유지 보수에 대한 가동 중단 시간을 획기적으로 줄여주며 3개의 롤러는 모두 프린터의 전자 장치에 접근할 필요없이 수 분 만에 교환 할 수 있습니다.
와이드 오픈 프린트 헤드는 청소 및 교체를 단순하게하며 퀵 체인지 모듈 식 드라이브 시스템은 프린터 수리 시간을 줄입니다.
확장된 RFID 기능은 보다 향상된 추적 성능을 제공하여 운영 효율성을 향상시킵니다.
리본 교체와 같은 일상적인 작업은 매우 간단합니다 (두 인쇄 폭 모두 동일).
새로운 그래픽 LCD 디스플레이는 장치에서 분리할 수 있으며 사용 편의성을 위해 응용 프로그램에 적합한 위치에 재배치 할 수 있습니다.
인쇄 및 적용할 기계와 쉽게 통합할 수 있으며 먼지와 물에 대한 내성이 뛰어납니다.
확장된 연결 포트 및 어플리케이터 포트의 향상된 소프트웨어 제어 기능은 통합 유연성을 한층 향상시킵니다.
Resolution: 203 dpi (8 dots per mm); 300 dpi (12 dots per mm)
Rotatable front panel display (0,180)
16MB SDRAM memory, 64MB Flash Memory
Available in right and left hand configurations
ZebraNet 10/100 Print Server (Internal)
Embedded ZebraLink WebView™and Alert features
Real Time Clock
Applicator interface - provides status and control signals for applicators
Communications via serial RS-232, IEEE 1284 bidirectional parallel interface with auto detect, and USB 2.0 port
Full function graphic front panel & large multilingual back-lit LCD display with user programmable password protection
Thin film print head with E3® Element Energy Equalizer
Dual media sensors, transmissive and reflective, selectable through software or front panel
ZPL® or ZPL II® programming language, selectable through software or front panel
XML-Enabled Printing ? allows XML communications from today's enterprise systems for barcode label printing
32 bit 133 MHz RISC processor
Zebra printer driver for Windows 7, XP, Vista, 2008, and 2003 operating systems
Advanced media counters
PRINTER SPECIFICATIONS
ZE500-4™ :
Maximum print width : 4.1”/104 mm
Media specification :
Label and liner width: 0.625”/16 mm to 4.5”/ 114 mm
Minimum length with back feed: 0.5”/13 mm
Minimum length without back feed: 0.25”/6.5 mm
Minimum length in stream mode: 0.25”/6.5 mm
Maximum length: 39”/990 mm
Maximum continuous media print length: 150”/3,810 mm
Ribbon width: 1”/25.4 mm to 4.2”/107 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed : 12”/305 mm per second (203 and 300 dpi)
ZE500-6™ :
Maximum print width : 6.6”/168 mm
Media specification
Label and liner width : 3”/76 mm to 7.1”/180 mm
Minimum length with back feed : 3”/76 mm
Minimum length without back feed : 1”/25.4 mm
Minimum length in stream mode : 1”/25.4 mm
Maximum length : 39”/990 mm
Maximum continuous media print length : 150”/3,810 mm
Ribbon width : 3”/76 mm to 7.1”/180 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed
12”/305 mm per second (203 dpi)
10”/254 mm per second (300 dpi)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
고객의 니즈를 충족시키는 고성능 옵션의 지브라 G 시리즈™ GX™ 및 ZD500™ 데스크탑 바코드프린터는 가장 빠른 인쇄 속도와 함께 이더넷, LCD 화면, 무선 또는 블루투스를 비롯한 다양한 첨단 기능 및 옵션을 제공합니다.
확장된 미디어 처리 기능으로 Peel & Present와 라벨, 영수증 및 태그에 적합한 정밀 커터, 라이너리스 라벨 등을 제공합니다.
지브라 GX™ 시리즈 및 ZD500™ 고성능 바코드프린터는 지브라 데스크탑 바코드프린터 제품군 중에서 가장 빠른 인쇄 속도와 완벽한 기능 세트를 제공합니다.
혁신적인 라벨, 영수증 및 태그 처리 기능을 갖추고 있어 필요한 유연성을 얻을 수 있습니다.
최상의 인쇄 품질과 다양한 연결 옵션을 제공하는 GX420™, GX430™ 및 ZD500 프린터는 다양한 애플리케이션을 지원하고 거의 모든 환경에 통합 가능하기 때문에 사용자가 효율과 수익을 높이고 시간을 절약하여 작업자 교육을 최소화할 수 있습니다.
고해상도의 인쇄 품질, 4개의 연결 옵션을 제공하는 ZD500 프린터는 컴팩트하며 최고의 성능에 필요한 기능들을 탑재한 프린터입니다.
어디에서든지 손쉽게 통합, 관리 및 유지보수할 수 있는 Link-OS 지원 프린터입니다.
감열 또는 열전사 모드로 작동합니다.
포함된 기능
지브라의 고성능 데스크탑 바코드프린터는 향상된 효율성과 생산성을 위해 동급 최고의 인쇄 속도와 기능을 제공합니다.
각 모델은 다양한 연결 옵션과 ZPL® 및 EPL™(GX 모델만 해당) 프로그래밍 언어로 손쉬운 업그레이드 및 통합을 제공하고 총 소유비용(TCO)을 절감할 수 있는 ENERGY STAR™ 인증 프린터입니다.
애플리케이션 유연성을 극대화해주는 강력한 기능
확장된 미디어 핸들링 옵션으로 Peel & Present와 라벨, 영수증 및 태그, 라이너리스 라벨에 적합한 Cutter 등을 제공합니다.
블루투스와 WiFi를 포함한 다양한 연결 옵션. LCD 디스플레이(옵션)를 통해 프린터 설정을 변경할 수 있습니다.
특정 요구에 맞도록 구성 가능
감열 또는 열전사 모델로 제공되는 이들 소형 바코드프린터는 직관적인 디자인과 다양한 연결 옵션을 갖추고 있습니다.
GX430과 ZD500 프린터 모두 300 dpi 고해상도 인쇄가 가능하므로 텍스트와 그래픽으로 구성된 소형 바코드라벨 인쇄에 적합합니다.
PRINTER FEATURE
Print methods : Thermal Transfer and Direct Thermal
ZPL programming language
EPL programming language (GX model only)
Dual-wall frame construction
Tool-less printhead and platen replacement
Open ACDESS for easy media loading
Quick and easy ribbon loading
Simplified calibration of media
ENERGY STAR qualified
PRINTER SPECIFICATIONS
Resolution :
203 dpi/ 8 dots/mm per mm
300 dpi/ 12 dots/mm per mm (optional on ZD500)
Memory:
128 MB Std SDRAM memory (4 MB available to user)
256 MB Std Flash memory (56 MB available to user)
Real time clock
Maximun Print Width : 4.09"/ 104 mm
Maximun Print Length : 39.0"/ 990 mm
Maximun Print Speed :
6"/152 mm per second (203 dpi)
4"/102 mm per second (300 dpi)
Media Sensors : Multi-position transmissive and adjustable reflective sensor
MEDIA CHARACTERISTICS
Label and Liner Length :
Maximum non-continuous : 39"/ 990 mm
Maximum using tear off mode : .25" (6.3 mm)
Minimum with label present sensor used : 0.5"/ 12.7 mm
Minimum with cutter : 1.0"/ 25.4 mm
Label and Liner Width : 0.75"/ 19 mm - 4.25"/ 108mm
Media Roll Size :
Maximum outside diameter : 5"/127 mm
Core inner diameter : 0.5"/ 12.7 mm, 1.0"/25 mm, 1.375"/ 35 mm, 1.5"/37.1 mm, 3"/ 76mm
Media Thickness : .003"/0.08 mm to .012"/ 0.305 mm
Media type : Roll-fed or fan-fed, dia-cut or continuous direct thermal label with or wothout black tag, stock, continuous receipt paper, wristbands
Ribbon charcateristics :
Outside diameter : 1.36"/ 35 mm
Standard length : 244"/ 74 m
Ratio : 1:1 media to roll to ribbon
width : 1.33"/ 33.8 mm to 4.3"/ 109.2 mm
Core inner diameter : 0.5"/ 12.7 mm
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 QLn 시리즈 모바일 프린터의 확장인 QLn220 ™ 및 QLn320 ™ 헬스케어 프린터는 의료 시설의 요구에 맞게 특별히 설계되었습니다.
지브라 헬스케어 모바일 프린터는 세균으로 부터 환자를 보호하기 위해 내구성이 높고 소독이 가능한 재료를 사용하여 제작되었습니다.
특히 의료용으로 개발된 Zebra의 QLn 시리즈 프린터를 사용하면 다음과 같은 업무를 지원합니다.
병원 침상 옆의 표본을 모으고, 수집 및 관련 레이블을 만들 수 있습니다.
Zebra의 Link-OS® 환경으로 모든 인쇄 장치를 가상으로 관리, 유지 보수 및 업그레이드 할 수 있습니다.
프로파일 관리자 응용프로그램을 사용하여 프린터 구성을 제어하고 형식 출력 및 인쇄물의 일관성을 유지합니다.
서비스 요청 감소
CLSI (Clinical and Laboratory Standards Institute®) 표준을 만족하는 라벨 인쇄
STANDARD FEATURES
Includes disinfectant-ready plastics in a lighter healthcare color scheme
Apple® iOS, Android, Windows Mobile and BlackBerry® connectivity
Direct thermal printing of barcodes, text and graphics
CPCL, EPL™ and ZPL® programming languages
256 MB Flash supports downloadable programs, receipt formats, fonts and graphics (64 MB available for user storage)
2450 mAh (nominal) 18.1 Wh removable, rechargeable Li-Ion battery
Built-in battery charger
IEC 60601-certified AC adapter for medical environments
Serial and USB ports (both support strain relief)
Belt clip for unobtrusive and convenient printing (not compatible with extended capacity battery)
Black mark and gap media sensing using fixed center position sensors
Easy-to-use peel and present mode
Label present sensor for issuing labels one at a time
Tear bar for easy media dispensing
Center-loading media locking for variable roll widths
“Clamshell” design for easy media loading
Management: Mirror, SNMP, Web server, Profile Manager, AirWatch® and Wavelink Avalanche®
Large, easy-to-read LCD control panel (240 x 128 pixels)
LCD can be customized using WML (text and icons)
5-way navigation buttons, two software defined keys
Printer alerts on the display, help menus
Tolerance of multiple drops from 5’/1.52 m to concrete
IP43 dust- and water-resistance rating (IP54 with soft case)
400 MHz 32-bit ARM processor
XML support
Supports vertical and horizontal printing
Printers can be used in any orientation
QR barcode links to web-based help pages
Zebra Print Touch simplifies Bluetooth pairing and launches web-based help pages with Near Field Communication (NFC) enabled devices
Label odometer
Real-time clock
PRINTER SPECIFICATIONS
Resolution : 203 dpi/8 dots per mm
Memory : 128 MB RAM; 256 MB Flash (standard)
Print Width : 1.9”/48 mm
Print Length : Min: 0.5”/12.7 mm, Max: 32”/813 mm
Print Speed : Up to 4”/102 mm per second
Media Sensors : Black mark and gap media sensing using fixed center position sensors; label present sensor for issuing labels one at a time
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 MP6000, 2D 고정식 바코드스캐너는 거의 모든 인쇄 또는 휴대폰, 태블릿PC 화면의 1D 또는 2D 바코드를 사실상 놀라운 속도로 모든 상황에서 캡처 할 수 있습니다.
놀라운 스캔 성능
지브라의 업계에서 입증된 선도적인 이미징 기술을 사용하면 오늘날 사용 가능한 어떤 레이저 바이옵틱 스캐너보다 빠른 속도로 바코드를 스캔할 수 있습니다.
각종 바코드 캡처
어떤 종류의 1D 및 2D 바코드라도 자동으로 판독/평가할 수 있습니다.
종이 라벨에 인쇄되어 손상되었든, 플라스틱 고객카드나 기프트카드에 인쇄되어 있든, 휴대전화 화면에 표시되어 있든 상관 없습니다.
탁월한 신뢰성, 비용 및 총소유비용(TCO) 절감
고장 및 유지 관리 비용을 최소화할 수 있습니다. 스캔 엔진에 작동 부품이 없으므로 전력 소비량이 최소 30% 감소하고 정전용량형 버튼도 마모되는 일이 없습니다.
매장 및 고객 요구 사항에 맞게 맞춤 가능
6개 포트가 있으므로 스케일, 고객이 휴대전화나 고객카드의 바코드를 스캔할 수 있는 고객 스캐너(Customer Side Scanner), 핸드헬드 스캐너, EAS 기기 등과 같은 새로운 기능을 손쉽게 추가할 수 있을 뿐만 아니라, RFID와 같은 미래의 요구 사항에 맞게 확장도 가능합니다.
탁월한 관리 기능
보완적 관리 소프트웨어를 사용하면 스캐너, 스케일, 연결된 모든 주변 기기를 비롯해 전체 스캐너 솔루션을 원격으로 관리할 수 있습니다.
사파이어 유리
수평 스캔 창에 업계 최고의 유리를 사용하여 긁히지 않고 마모나 훼손에도 취약하지 않습니다.
통합 EAS 지원
현재 사용 중인 Checkpoint® 또는 Sensormatic® 시스템을 지원하므로 업그레이드하느라 별도의 시간 및 비용이 들지 않습니다.
초 저소음
레이저 스캐너와 달리 모터 소음이 없는 MP6000은 매우 조용하여 POS 환경을 개선시켜 줍니다.
사용 편의성
전방향 스캔 및 6면 720° 커버리지 영역을 지원하므로 신속하게 스캔하고 정확하게 계산을 마칠 수 있습니다.
고객측 스캐너(옵션)
고객이 자신의 고객카드, 쿠폰, 충동 구매 품목 및 휴대전화에 표시된 바코드를 동시에 스캔할 수 있습니다.
손쉬운 설치
기존 계산대에 잘 맞습니다.
3개의 프로그래밍 버튼
푸시버튼을 사용해 광범위한 POS 프로세스를 간소화하여 처리량을 향상시켜 줍니다.
PHYSICAL CHARACTERISTICS
Dimensions :
Long scanner and scanner/scale :
20 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 507 mm L x 292 mm W x 102 mm D x 128 mm H
Medium scanner and scanner/scale : 15.7 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 399 mm L x 292 mm W x 102 mm D x 128 mm H
Short scanner : 13.9 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 353 mm L x 292 mm W x 102 mm D x 128 mm H
Weight :
Long scanner : 15.2 lb./6.9 kg
Long scanner/scale : 18.3 lb./8.3 kg
Medium scanner : 13.0 lb./5.9 kg
Medium scanner/scale : 16.2 lb./7.4 kg
Short scanner : 12.0 lb/5.4 kg
Scale :
30 lb. in 0.01 lb. increments/15 kg in 5 g increments
Maximum static weight: 300 lb./136 kg
Scale can be added after scanner installation (most countries)
Single-cable and dual-cable protocols
Compatible with Mettler and Bizerba price computational scales
Options :
0-12 lb. in 0.005 lb. increments and 12-30 lb. in 0.01 lb. increments
0-6 kg in 2 g increments and 6-15 kg in 5 g increments
Single-head and dual head remote scale displays
Dual heads rotate throug 290° for widest viewing angles on the market
Horizontal Glass : Sapphire; integrated Produce Lift Bar
User Interface :
Soft touch capacitive pads (no buttons to break or wear out)
Wide, centrally located two-color decode/ information bar (clear for cashiers and self-checkout users)
Beeper: adjustable volume and beep tones
Three programmable buttons
Ports :
One shared POS port for USB/RS-232/ IBM RS-485
Three USB peripheral ports
Two powered RS-232 peripheral ports
Checkpoint interlock port
Remote scale display port
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC55 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC55 산업용PDA를 통해 효율성과 고객 서비스 개선 작업을 처리하려면 작업자에게 실시간 데이터에 대한 안전하고, 신뢰할 수 있는 원격 액세스가 필요합니다.
개인용 스마트폰, 태블릿PC 및 랩톱은 매력적이고 사용하기 쉽지만 매일 비즈니스에 사용하는 데 필요한 내구성 또는 기능성이 떨어지는 문제가 있기 때문에 포켓 크기의 지브라 TC55 산업용 PDA는 이와 같은 걱정이 없습니다.
Zebra TC55 산업용 PDA는 자주 사용되는 개인용 기기의 최근 기술에, 세련된 디자인, 사용 편의성을 바탕으로 하지만 소비자용 모델과 달리 TC55에는 데이터 캡처 기능이 통합되어 있습니다.
TC55 바코드 PDA는 산업 환경에서의 마모를 견디도록 제작되었기 때문에 현장에서 고장이 발생할 가능성이 적습니다.
기업 환경의 일상적인 업무용으로 제작
지브라 TC55 바코드 DPA는 오랜 내구성을 제공하는 기능들을 갖추고 있습니다.
낙하 및 충격 사양, IP67 밀봉 및 Corning Gorilla Glass 2 디스플레이로 인해 낙하 및 유출 시에도 안정적인 작동이 보장되어 평균 수명 3년을 쉽게 달성할 수 있습니다.
최대 데이터 입력 유연성을 갖춘 업계 최고의 이중 모드 터치 패널
원하는 데이터 입력 모드를 손가락(두꺼운 장갑 착용 유무에 상관없음)또는 서명 캡처용 스타일러스 중에서 선택할 수 있습니다.
전력 소비가 적지만 매우 밝은 4.3인치로 정전식 터치 환경의 수준을 한 차원 높여줍니다.
지브라 TC55 모바일 컴퓨터는 또한 습기가 있는 상태에서도 작동하는 WVGA 디스플레이를 제공합니다.
데이터를 자동으로 캡처하고 전체 문서를 처리합니다.
SimulScan Document Capture를 통해 작업자가 하나의 버튼만 누르면 바코드, 텍스트 필드, 전화 번호, 이미지, 서명 및 확인란을 캡처할 수 있습니다. 즉, 송장 및 주문 처리 속도가 향상됩니다.
기업용 안드로이드
모든 지브라 TC55 산업용 PDA에는 소비자 운영체제의 AndroidTM 를 더욱 강화된 기업용 운영체제로 탈바꿈시킬 수 있는 다양한 기능을 제공하는 Mobility Extensions (Mx)가 기본으로 탑재되어 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions (with standard battery) : 5.4 in. L x 2.7 in. W x 0.63 in. D/ 137 mm L x 69 mm W x 15.9 mm D
Weight With standard battery : 7.8 oz./220 g
Display : Blanview® LCD display, 4.3 in. WVGA, exceptional low power consumption, exceptionally bright image with 700 NITs, 3% transflective, Corning Gorilla Glass 3
Camera/Imager Exit Windows : Corning Gorilla Glass 3
Touchpanel : Dual mode capacitive touch with stylus or fingertip (bare or gloved) input
Backlight : LED backlight
Power :
PowerPrecision Li-Ion batteries
Two options: Extented 1.5x 4410 mAh or Standard Capacity 2940 mAh battery
Expansion Slot : User accessible 32 GB microSD slot with SDHC support
Network Connections : USB 2.0 High Speed (host and client), WLAN, WWAN and Bluetooth
Notification : Vibrate and audible tone
Keypad : On-screen keypad
Voice and Audio : 2 front facing speakers; dual noise-cancelling microphones; high-quality speaker phone; 3.5mm headset jack , Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU ; 1.5 GHz dual core processor
Operating System : Android 4.1.2
Memory : 1 GB RAM / 8 GB Flash MLC
USER ENVIRONMENT
Operating Temp. : 14°F to 122°F/-10°C to 50°C
Storage Temp. : -40°F to 158°F/-40°C to 70°C
Humidity : 5% to 85% non-condensing
Drop Specification ; 4 ft./1.2 m drop to plywood per MIL-STD 810G; With protective boot: 5 ft./1.5m to concrete at room temperature
Tumble Specification :
300 1.6 ft/0.5 m tumbles;
With protective boot: 1000 1.5ft./0.5 m tumbles; meets and exceeds IEC tumble
Thermal Shock : -40°F to 158°F/-40°C to 70°C rapid transition
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PX4i PX6i 열전사감열 RFID 산업용 바코드프린터 매뉴얼HION IT
인터맥, EasyCoder PX (PX4i, PX6i) 시리즈 바코드프린터는 까다로운 산업환경에 맞게 설계된 견고한 금속의 고성능 프린터로, 24시간 작동을 지원합니다.
개방된 모듈식 디자인은 프린터가 쉽게 적응, 유지보수 및 서비스를 제공받을 수 있도록 합니다.
인터맥 PX 시리즈, PX4i 및 PX6i 산업용 바코드 프린터는 각각 4인치 또는 6인치의 최대 인쇄폭 기능이 특징입니다.
제조업 환경에서의 간편한 통합을 위해 설계된 PX 시리즈 산업용 프린터는 사실상 어떠한 위치라도 장착할 수 있습니다.
다기능성 폼 팩터가 라벨 자동부착기 같은 주변장치와의 연결을 용이하게 합니다.
인터맥 EasyCoder PX 시리즈 프린터는 사용자 정의 프로그램을 실행, 독립적으로 작동할 수 있어서 PC가 필요하지 않습니다.
최대 7개의 유선 및 무선 연결 인터페이스를 통해 스캐너, 스케일, 기타 프린터 및 컨베이어를 포함한 생산라인 기계장치에서 작동할 수 있을 뿐만 아니라 네트워크 호스트에서 정보에 직접 액세스할 수 있습니다.
최대의 성능 및 인쇄품질- 분당 최대 115개까지 6인치 길이의 컴플라이언스 라벨 인쇄
견고한 금속 구조로 열악한 산업환경에서도 24시간 / 7일 인쇄제공
변화하는 호스팅 환경 및 응요운야에 쉽게 적응
자동화된 라벨 부착 응용분야의 통합을 위한 모듈화 디자인
PC 비용을 들이지 않는 독립형 프린터 응용지원
IPL 또는 Fingerprinter/DP 프린터 명령 언어 선택
203, 300 또는 400 dpi 인쇄 해상도의 선택 사항을 제공하는 교체 가능한 프린트 헤드
PHYSICAL CHARACTERISTICS
LxHxW : 482 x 238 x 275 mm (19.0 x 9.4 x 10.8 in)
Weight : 12.85 kg (28.4 lbs)
PRINT SPECIFICATIONS
Max. Print Width : 112 (DT)/110 (TT) mm (4.4/4.3 in)
Max. Length :
4095 mm (161 in) at 203 dpi
2775 mm (109 in) at 300 dpi
1016 mm (40 in) at 406 dpi
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC
Generation 2
865-928 MHz radio configured to comply with local UHF RFID regulations including FCC and ETSI.
Contact local representative for availability in particular region.
PRINT SPEED
100 - 300 mm/s (4 - 12 ips) for 203/300dpi
100 - 250 mm/s (4 - 10 ips) for 406 dpi
MEDIA
Labels & Tags :
Max/Min Width : 120/ 25.4mm (4.72/ 1 in)
Thickness : 2.4 to 10.0 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter : 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Ribbons :
Roll Max Diameter : 80 mm (3.15in), approx. 450m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/ XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop, Applicator Interface
Wireless :
IEEE 802.11 b/g
Wi-Fi Certified, Cisco® Compatible (CCX) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAPTTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols : TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included. Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PM4i 열전사감열 RFID 바코드프린터 산업용프린터 매뉴얼HION IT
다기능 PM4i는 최신 RFID 기술과 함께 Intermec의 바코드프린터에서 사용자들이 기대해왔던 신뢰성 및 견고성과 함께 뛰어난 성능을 제공합니다.
기업들은 PM4i를 통해 RFID 어플리케이션을 구동시켜 RFID 스마트 라벨을 생성기킬 수 있습니다.
PM4i는 가변 주파수 RFID Tag 를 사용함으로써 전세계에서 사용할 수 있는 라벨 인코딩과 인쇄를 동시에 할 수 있으며, 이를 통해 지역 표준에 따라 달라지는 여러 주파수 Tag 를 읽을 수 있습니다.
PM4i 는 완벽한 프린터 독립성 어플리케이션에 대한 사용자 정의 프로그램을 실행하는 "스마트 클라이언트"의 역할도 할 수 있습니다.
PM4i 프린터는 PC 필요없이 추가적인 하드웨어(예, 스캐너, 다른 프린터, 컨베이어)를 작동시킬 수 있고, 네트워크 호스트로부터 정보에 접근할 수 있으며, 기능 추가를 위한 어플리케이션으로도 변경시킬 수 있습니다.
통합 EasyLAN 이더넷, USB, 직렬 연결은 PM4i와의 기본 인터페이스 입니다.
사용자는 추가적인 EasyLAN 무선 및 산업용 인터페이스 보드를 선택할 수 있습니다.
EasyLAN 무선 인터페이스는 통합 표준 802.11b 무선 통신을 사용합니다.
네트워크를 통해 이 무선 통신은 중계된 정보의 128-bit WEP 암호화를 제공합니다.
Intermec의 유선 및 무선 기술은 보안 인쇄와 모든 환경에 대한 네트워크 인프라를 보장합니다.
PM4i 바코드프린터는 공급망 전체에 걸쳐 신속하고 정확한 데이터 수집을 위해 모든 물품들이 RFID를 통해 라벨이 주어지고, 추적된다는 것을 보장하며, 제조업, 창고업 및 물류업 용도에 적합하도록 설계되었습니다.
향후 RFID 표준으로서의 UHF Gen 2를 지원
향후 RFID 표준 발전을 지원하기위한 고유 제품기능으로 고객 투자보호
주파수 가변 UHF Tag를 인코딩하는 최초의 RFID 프린터
바코드, 판독 가능한 택스트, 그래픽을 동시인쇄
독립형 프린터 어플리케이션 지원
통합 EastLAN 이더넷, USB, 직렬 인터페이스 표준
EasyLAN 무선 인터페이스(옵션)
DESCRIPTION
Direct thermal and thermal transfer label, ticket and tag printer. Also available with RFID.
PHYSICAL CHARACTERISTICS
LxHxW : 543 x 261 x 298mm (21.38 x10.28 x 11.73 in)
Weight : 13.5 kg (29.76 lbs.)
PRINT SPECIFICATIONS
Max. Width : 104 mm (4.09 in) at 203 dpi and 406dpi; 105.7 mm (4.16 in) at 300 dpi.
Max. Length : 4095 mm (161.2 in) at 203 dpi; 2730 mm (107.5 in) at 300 dpi. 1016 mm (40 in) at 406 dpi.
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC Class 1 Generation 2, 865-928 MHz radio configured to comply with local UHF FID regulations including FCC and ETSI. Contact local representative for availability in particular regions.
PRINT SPEED
100 - 200 mm/s (4 - 8 ips) variable (203 dpi)
100 - 150 mm/s (4 - 6 ips) variable (300/406 dpi)
PRINT RESOLUTION
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi)
16 dots/mm (406 dpi)
MEDIA
Type : Labels and Tags
Max/Min Width : 114.3 /25.4 mm (4.5 /1 in)
Thickness : 2.5 to 8.7 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diamete r: 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 82 mm (3.2 in), approx. 450m
Core ID : 25.4 mm (1 in)
Type : Wax, mid-range, resin
MEMORY
Standard : 16MB Flash memory, 32MB SDRAM, 1 Compact Flash slot
Available : 1GB CompactFlash memory, multi-GB USB memory device (FAT16/FAT32 USB drivers supported)
POWER SUPPLY
AC Voltage : 90 to 265 VAC, 45 to 65Hz
PFC Regulation : IEC 61000-3-2
Power Consumption : Standby 15W; Peak 300W
OPERATING ENVIRONMENT
Ambient Operating Temperature : +5°C to +40°C (+41°F to +104°F)
Storage Temperature : -20°C to +70°C (-4°F to +152°F)
Humidity : 20 to 80% non-condensing
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PF2i PF4i 열전사감열 바코드프린터 산업용프린터 매뉴얼HION IT
컴팩트한 PF2i, PF4i 미드 레인지 바코드프린터는 인터맥의 스마트하고 강하고 안전한 산업용 프린터 제품입니다.
Intermec SmartSystems ™ 및 Wavelink Avalanche ™를 통해 PF2i의 통합 장치관리 및 진단 기능은 가동 중단 시간을 줄이고 설치를 단순화합니다
견고한 All-Metal PF2i 바코드프린터는 다운 타임을 줄이고 유지 보수 비용을 최소화하는 기능을 통합합니다.
작은 크기에도 불구하고 PF2i는 풀 사이즈 라벨 롤 (최대 8.4 in / 213 mm)을 사용하여 용지 교체 횟수를 줄입니다.
QuickMount ™ 프린트 헤드 디자인 덕분에 프린트 헤드를 빠르고 쉽게 교체 할 수 있습니다.
최고 수준의 보안 무선 연결 (WPA2)을 포함한 여러 보안 인터페이스 옵션을 사용할 수 있습니다.
업계 유일의 프린터인 WiFi- 및 CCX-Certification과 함께 사용할 수있는 인터맥 산업용 프린터는 무선 네트워크 무결성을 유지하고 구성 시간을 단축시킵니다.
모든 프린터는 이더넷 연결 및 출현하는 네트워크 프로토콜 IPv6과 함께 제공되므로 장기간의 엔터프라이즈 확장성을 보장합니다.
기타 연결 옵션 - 표준 RS232 및 USB 포트, 옵션 병렬, 이중 직렬 또는 산업용 인터페이스는 통합 유연성을 추가로 제공합니다.
Strong, all-metal construction and superior throughput for harsh industrial environments
Compact size fits space- constrained applications
Smart Printing capabilities support stand-alone printer applications, eliminating PC expense and complexity
All-in-one, user-selectable printer languages Fingerprint/Direct Protocol (DP), IPL, ZSim and DSim in every printer
Secure wireless connectivity : CCX and WiFi® certified with WPA2
Integrated Ethernet, USB host and device, and serial interface standard
Internet Protocol v6 (IPv6) support
PHYSICAL CHARACTERISTICS
Length : 397 mm (15.6 in)
Height : 178 mm (7 in)
Height (big top) : 205 mm (8.1 in)
Width : 194 mm (7.6 in)
Weight : 5.5 kg (12 lbs.)
PRINT SPECIFICATIONS
Max. Width: 56 mm (2.2 in)
Max. Length: 4095 mm (161.2 in)
Print Speed : 100 ? 200 mm/s (4 - 8 ips) variable
Print Resolution : 8 dots/mm (203 dpi)
MEDIA
Type : Labels & Tags
Max/ Min Width : 60/25.4 mm (2.36/1 in)
Thickness : 3.0 to 7.5 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter (long door): 152.4 mm (6 in)
Label Roll Max Diameter (short door): 213 mm (8.38 in)
Label Roll Core: 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 65 mm (2.56 in), approx. 225m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop
Wireless:
IEEE 802.11 b/g
Wi-Fi Certified, CCX (Cisco®) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAP- TTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols :
TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 INTERMEC PD43 PD43c 2D 열전사 산업용 바코드프린터 매뉴얼HION IT
경공업 (Light Industrial) 산업에 적합한 열전사 인쇄타입의 PD43, PD43c 바코드 프린터는 설치공간이 협소한 얕은 조리대 및 인출 타입의 캐비넷 공간에서의 설치사용이 용이한 혁신적인 인쇄 성능을 제공합니다.
인터맥 PD43, PD43c 바코드 프린터 물류센터 및 배송센터, 물류창고, 항공기내 승객서비스 등에 적합하며, 외형은 금속재질, 강력한 캐스트알루미늄 인쇄 메커니즘, 프린터 헤드 및 롤러 교체시 도구 필요없어 다운타임을 최소화 하도록 설계되었습니다.
Intermec PD43은 호스트 컴퓨터가 없어도 설정을 쉽게 구성, 구성 및 미세 조정할 수있는 컬러 그래픽 디스플레이를 제공합니다.
실제로 스마트 인쇄 기능을 통해 PD43 은 프린터 내부에서 바로 응용 프로그램을 실행할 수 있으므로 연결된 PC가 필요하지 않습니다.
Incredibly Compact: Small footprint for installation into compact tabletops and pull-out cabinets.
Built Strong: Rugged metal chassis and print mechanism provide investment protection.
Easy to Use: Intuitive, ten-language color display or icon interface simplifies setup and maintenance.
uilt-In Command Languages: Fast, friendly and complete printer emulation-including ZSim2, our most comprehensive ZPL-II® emulation ever-makes upgrading from other printer brands easy.
Smart Printer: Run apps right inside the printer, control peripherals, and eliminate the need for a connected PC, using either C# for Printers or Fingerprint.
Maintenance Made Easy: Completely tool-free printhead and platen roller replacement.
Broad Media Compatibility: Supports half- and one-inch ribbon cores, ink-in or ink-out.
Co-Engineered Media: Extensively tested with Intermec co-engineered media products, ensuring optimized performance. Compatible with Honeywell's broad range of media products.
Available Accessories: Customize with a wide range of available accessories such as a Wi-Fi/Bluetooth® module and cutter.
PHYSICAL CHARACTERISTICS
Length ;
PD43 with Standard Door : 470 mm (18.5 in)
PD43 with Flat Top Door : 470 mm (18.5 in)
PD43c : 236 mm (9.3 in)
PD43c with Optional External Media Holder : 432 mm (17.0 in)
Width ;
PD43 with Standard Door : 211 mm (8.3 in)
PD43 with Flat Top Door : 211 mm (8.3 in)
PD43c : 211 mm (8.3 in)
PD43c with Optional External Media Holder : 211 mm (8.3 in)
Height ;
PD43 with Standard Door : 249 mm (9.8 in)
PD43 with Flat Top Door : 209 mm (8.2 in)
PD43c : 205 mm (8.1 in)
PD43c with Optional External Media Holder : 217 mm (8.5 in)
Weight ;
PD43 with Standard Door : 8.4 kg (18.5 lbs)
PD43 with Flat Top Door : 8.3 kg (18.3 lbs)
PD43c : 5.1 kg (11.2 lbs)
PD43c with Optional External Media Holder : 6.0 kg (13.2 lbs)
PRINT SPECIFICATIONS
Max Print Width : 104 mm (4.1 in)
Print Speed : 203 mm/s (8.0 ips) @ 8.0 dpmm (203 dpi), 152 mm/s (6.0 ips) @ 11.8 dpmm (300 dpi)
Resolution : 8.0 dpmm (203 dpi), 11.8 dpmm (300 dpi)
Media Compatibility
Max. Media Diameter (OD) ;
PD43 with Standard Door : 213 mm (8.375 in)
PD43 with Flat Top Door : 152 mm (6.0 in)
PD43c with External Media Holder : 203 mm (8.0 in)
Media Core Sizes (ID) : 1, 1.5, 3 in
Media Width : 19 mm (0.75 in) to 118 mm (4.65 in)
Label Length : 6.4 mm (0.25 in) to 172.7 cm (68.0 in)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
아보패널PC ARBOR Gladius G1056 2D 10.4인치 산업용 패널PC 매뉴얼HION IT
아보패널PC, Gladius G1056는 10.4인치 AMD G-T56N 견고한 산업용 패널PC 입니다.
ARBOR 산업용PC는 고성능 / 저전력 플랫폼으로 패널PC의 수명을 연장할 수 있습니다.
SYSTEM
CPU : AMD G-Series APU G-T56N dual-core 1.65GHz
Graphics Controller : AMD Radeon HD 6320
Memory : 4GB DDR3 SO-DIMM memory module installed
Chipset : AMD Platform Control Hub A50M
BIOS : AMI Aptio® UEFI BIOS
Audio :
1 x microphone
2 x 2W speakers
1 x Earphone jack
Storage 1 x 32GB 1.8" SATA SSD installed
PERIPHERALS AND DEVICES
Camera :
1 x 5.0 MP front-facing AF CMOS camera (optional)
1 x 5.0 MP rear AF CMOS camera
RFID & NFC : 1 x 13.56MHz, ISO 15693/14443A/ 14443B, RFID & NFC Reader (distance: 3~5cm; speed: 5 cards/sec) (optional)
WLAN & Bluetooth : 1 x WLAN 802.11 a/b/g/n & Bluetooth 2.1 + EDR
WWAN : HSUPA / HSPA+/ LTE for WWAN (optional)
I/O INTERFACE
USB Port : 4 x USB 2.0 ports
Serial Port : 1 x RS-232 port (optional)
Ethernet : 1 X RJ45 GbE LAN
Docking Port : 1 x 35-pin pogo connector for docking connection
Video Port : 1 x VGA; 1 x mini DisplayPort
BUTTON & INDICATOR
Function Key : 1 x 5-way function key
Power Button : 1 x Power on/off button
LED : 4 x LEDs (Power, Battery Status, WLAN/RFID, Bluetooth)
TOUCH SCREEN
Type : Analog Resistive
Controller Interface : USB Interface
Digitizer : Electromagnetic digitizer with battery-free pen
LCD DISPLAY
Size/Type : 10.4" AFFS+ TFT Active Matrix Panel
Max. Resolution : 1024 (H) x 768 (V)
Luminance : 340 cd/m²
Contrast Ratio : 600:1
View Angle (U/D/R/L) : 89°/89°/89°/89°
Backlight Type : LED
POWER SUPPLY
Adapter Input : 100 ~ 240VAC (Full Range)
Adapter Output : 19VDC, 4.74A, 90W
Battery Type : Li-battery pack
Battery Capacity : 2 x 2500mAh 4-cell external battery pack
Battery Life : Up to 6 hours (depends on configuration and use)
MECHANICAL & ENVIRONMENTAL
Operating Temp. : -20 ~ 45ºC (-4 ~ 113ºF)
Storage Temp. : -20 ~ 60ºC (-4 ~ 140ºF)
Discharging Temp. : -20 ~ 40ºC (-4 ~ 104ºF)
Charging Temp. : 0 ~ 40ºC (32 ~ 104ºF)
Operating Humidity : 10 ~ 95% @ 45ºC (non-condensing)
Dimensions (W x H x D) : 266.8 x 257.7 x 67.7 mm (10.5" x 10.1" x 2.7")
Gross Weight : 1.8 kg (3.9 lb)
Vibration : 3 Grms/ 5 ~ 500Hz/ random operation
Shock : 40G peak acceleration (11 ms duration)
Transit Drop : 3ft. (90cm), except the front side
IP Rating : IP54 (Front panel only)
Regulatory : CE/FCC Class B, VCCI certified
OS SUPPORT
Windows XP Embedded / Windows XP Professional
Windows Embedded 7 / Windows 7 Professional
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
아보패널PC ARBOR ASLAN-W810C-2930G2 10.1인치 산업용PC 매뉴얼HION IT
아보패널PC, ASLAN-W810C-2930G2는 10.1인치 인텔 베이 트레일 SoC 프로세서가 장착된 산업용 패널PC 입니다.
산업용PC, ASLAN-W810C-2930G2는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인되었습니다.
최첨단 기술로 설계된 ARBOR, ASLAN-W810C-2930G2 패널PC는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적인 응용 프로그램 라인을 제공하는 강력하고 컴팩트한 공간 절약형 패널PC 입니다.
High Resolution LCD Display w/ LED Backlight
Flat panel with projected capacitive touchscreen
Front panel compliant with IP65
Anti-scratch surface: 7H hardness
Slim and Compact Design
Mini PCIe expansion slot support
Fanless cooling system
Cable-less Design
Low power consumption
DC-12V Power Input
SYSTEM
CPU : Intel® N2930 Quad-Core™ Processor 1.83GHz
Memory :
2GB DDR3L SO-DIMM RAM module installed
1 x DDR3L SO-DIMM Socket, supporting 1600MHz SDRAM up to 8GB
LAN : 2 x Intel® I210AT GbE controllers
Watchdog Timer : 1~255 levels reset
STORAGE
Device : 1 x mSATA for SATA interface SSD Supports 300MB/s HDD transfer rate
AUDIO
Speaker : 1x Mic-in / 1x Line out
LCD DISPLAY
Size/Type : 10.1" TFT LCD Panel
Max. Resolution : 1280 x 800, WXGA
Max. Colors : 16.7M
Luminance : 350 cd/m²
Touch Screen : Projected capacitive touch panel
View Angle (U/D/R/L) : 85°/85°/85°/85°
POWER SYSTEM
Power Input : DC 12V input with DC jack
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus :
1 x Full-Size mPCIE (PCIex1+USB2.0)
1 x Half-Size mPCIE (PCIex1 Lane only)
EXTERNAL I/O
USB Ports :
1 x Type-A USB 3.0 port
1 x Type-A USB 2.0 port
LAN : 2 x RJ-45 GbE ports
DVI : 1 x DVI-I connector
WiFi : 1 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : VESA-75 / 100 Mounting with Bracket
Chassis : Aluminum front bezel and SECC steel chassis
Dimension (W x H x D) : 255.00 x 175.0. x 39.50 mm (10.04” x 6.89” x 1.56”)
Weight (Net) : 1.7 kg (3.75 lb)
ENVIRONMENT
Operating Temp. : -20ºC ~ 55ºC (-4°F ~ 140°F)
Storage Temp. : -30ºC ~ 70°C (-22°F ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 60°C (non-condensing)
Vibration : 5 ~ 500Hz, 1Grms Random (with CFast/SSD)
Shock : Operating 10G, 11ms Non-operating 30G, 11ms (with CFast/SSD)
OS SUPPORT
W7 Pro / WS7E / W8.1 Industry / Linux: Ubuntu
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
아보태블릿PC ARBOR M1042 2D 10.4인치 윈도우즈 헬스케어 태블릿PC 매뉴얼HION IT
아보, GM1042 의료용 태블릿 PC는 10.4인치 Intel® Atom™ N2800 프로세서가 포함된 Mobile Clinical Assistant 핸드헬드 태블릿PC 입니다.
ARBOR 의료 컴퓨팅 솔루션은 국제적으로 인정된 산업표준 (UL-60601-1 / EN60601-1, CE / FCC Class B Certified)을 준수합니다.
OS SUPPORT
Windows Embedded Standard 7 (WS7E / WS7P) for M1042R
Windows Embedded Standard 7 (WS7P) for M1042C
Linux: Ubuntu / Fedora
eHealthcare and Clinical Assistant Application
Anti-bacterial Protection (Against Escherichia Coli & Staphylococcus Aureus)
Soldered onboard Intel® Atom™ Processor N2800
IEC60601-1 (3rd edition), EN60601-1 (3rd edition), EN60601-1-2 certified
UL60601-1 compliant
Redundant Battery (Internal + Hot-swappable External Battery)
w/ Long Battery Life (6.5 hrs Max.)
Slim Appearance - Ultra-light Weight (1.3kg) and Ultra-slim (26mm) Slip-free Grip for Easy Handling
2D Barcode Scanner, 2.0 Megapixels Camera, RFID Reader
SYSTEM
CPU : Soldered onboard Intel® Atom™ Processor N2800 dual-core 1.86GHz
Graphic Controller : Intel® GMA3650
Memory : 2GB DDR3 SO-DIMM memory module installed
Chipset : Intel® NM10
Storage : 32GB mSATA SSD installed
PERIPHERALS AND DEVICES
Camera :
1 x 2.0 MP CMOS camera (front)
1 x 2.0 MP CMOS camera w/ auto-focus (rear)
WLAN & Bluetooth : 1 x WLAN 802.11 a/b/g/n & Bluetooth 2.1 + EDR
RFID : 1 x 13.56MHz RFID reader with ISO 14443A/14443B/15693 support (optional)
GSM/UMTS : 1 x HSUPA 3.75G (optional)
Barcode Scanner : 1 x 2D Barcode Scanner
Smart Card Reader : 1 x Smart Card Reader (optional)
I/O INTERFACE
Audio : 2 x 2W speakers, 1 x built-in Digital Microphone
USB Port : 1 x USB 2.0 port
Docking Port : 1 x 35-pin POGO connector to expand USB, VGA & GbE
BUTTON & INDICATOR
Button :
1 x Power on/off button with indicative LED ring
1 x 5-way function key
1 x RFID on/off button
1 x Barcode scan trigger button
4 x Programmable function keys (F1 ~ F4), Default setting: referring to User Manual
Indicator :
1 x Battery status LED
1 x Bluetooth LED
1 x WLAN/RFID on/off LED
1 x Power on/off LED
Reset Function : 1 x Hardware reset
TOUCH SCREEN
Type :
Analog Resistive Touch for M1042R
Projective Capacitive Touch, adopting Corning® Gorilla® Glass tech. for M1042C
Digitizer : 10.4" Electromagnetic Digitizer (only for M1042R)
LCD DISPLAY
Size/Type : 10.4" TFT Active Matrix Panel
Max. Resolution : 1024 x 768 (XGA) w/ 262,144 colors
Luminance : 340 cd/m² (typ.)
Contrast Ratio : 600:1 (typ.)
Backlight Type : LED
View Angle (U/D/R/L) : 89°/89°/89°/89° (typ.)
OS SUPPORT
Windows Embedded Standard 7 (WS7E / WS7P) for M1042R
Windows Embedded Standard 7 (WS7P) for M1042C
Linux: Ubuntu / Fedora
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
아보, Gladius G1052C 단종으로 대안모델인, Gladius G1052R은 10.4인치 Intel® Celeron® N2930 견고한 산업용 태블릿PC는 고성능 / 저전력 플랫폼으로 태블릿PC의 수명을 연장할 수 있습니다.
아보 Gladius G1052C 모델은 단종되었으며, 대안모델 G1052R은 스크린 터치 방식이 감압식 입니다.
10.4" AFFS+ TFT Active Matrix with Resistive Touch Panel (감압식)
Ultra low power consumption
Fully rugged for mobile POS or warehousing application
Meeting MIL-STD-810G, IP54, 4 ft. drop resistance
High mobility, multiple connectivity (Bluetooth/WLAN/WWAN)
Identification devices (barcode scanner, RFID & NFC reader and MSR)
Hot-swappable external battery w/ redundant internal battery
23-key keypad with numeric keys and function Keys
I.P.A. (Isopropyl) alcohol clearing allowed
SYSTEM
CPU : Intel® Celeron® Processor N2930 quad-core 1.83 GHz
Graphics Controller : Intel® HD Graphics
Memory : 2GB DDR3L SO-DIMM memory module installed (optional up to 8GB)
BIOS : UEFI BIOS
Audio :
1 x microphone
1 x 2W speaker
1 x Earphone jack
Storage : 1 x 32GB MLC mSATA SSD
PERIPHERALS AND DEVICES
Camera : 1 x 5.0 MP rear AF CMOS camera with LED (optional)
WLAN & Bluetooth : 1 x WLAN 802.11 a/b/g/n & Bluetooth 4.0 LE, class 2
RFID & NFC :1 x 13.56MHz, ISO 15693/14443A/ 14443B RFID & NFC Reader (distance: 3~5cm; speed: 5 cards/sec) (optional)
WWAN : HSUPA / HSPA+/ LTE (BTO)
Barcode Scanner : 1 x 1D/2D Barcode scanner (optional)
MSR : 1x Magnetic Stripe Reader (BTO)
Smart Card Reader : 1x Smart Card Reader (BTO)
GPS : U-BLOX 6 GPS Receiver (BTO)
I/O INTERFACE
USB Port : 1 x USB 3.0 Type-A port
SD Card : 1 x SD/SDHC/SDXC slot
Docking Port : 1 x 35-pin pogo connector for docking connection
Expansion : 1 x USB 2.0 Type-A or USB Sensor Hub
BUTTON & INDICATOR
Function Key ;
10 x Numeric keys (0 ~ 9)
1 x Enter key
1 x 4-way navigation key
4 x Function keys
1 x Ctrl key
1 x Backspace
1 x Dot (.) key
1 x Brightness key
Power Button : 1 x Power on/off button
LED Indicator ;
1 x Battery LED
1 x WLAN/RFID LED
1 x Bluetooth/WWAN LED
TOUCH SCREEN
Type : Analog Resistive Touch (감압식)
Light Transparency : 80% (typ.)
Controller Interface : USB Interface
LCD DISPLAY
Size/Type : 10.4” XGA TFT color LCD with LED backlight
Max. Resolution : 1024 x 768 (XGA) w/ 262,144 colors
Luminance : 340 cd/m² (typ.)
Contrast Ratio : 600 :1
View Angle (U/D/R/L) : 89°/89°/89°/89°
Backlight Type : LED
POWER SUPPLY
Adapter Input : 100 ~ 240VAC (full range)
Adapter Output : 19VDC, 3.42A, 65W
Battery Type : Li-battery pack
Battery Capacity ;
1 x 2500mAh 4-cell external battery pack
1 x 1880mAh 3-cell internal battery pack (optional)
Battery Life : Up to 8 hours (depends on configuration and use)
OS SUPPORT
Windows Embedded 7 / Windows 7 Professional
Windows Embedded Standard 8.0 / Windows Embedded 8.1 Industry Pro /
Windows 8.1 Professional
Windows 10 IoT Enterprise 2015 LTSB
Linux: Ubuntu
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
싸이퍼랩 9700 윈도우즈 PDA (Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3), 산업용PDA는 혹독한 현장에 적합하도록 설계되었으며 2 배터리(옵션) 운영으로 24시간 운영이 가능합니다.
타사의 경쟁 모델보다 CPU 처리속도, 메모리, 배터리 방진, 방수등급 등이 우월하면서도 가격 경쟁력 또한 우수합니다.
다양한 스캔 엔진을 제공하며 현장에서 교체 가능하도록 설계되었습니다.
(1D, 2D 다중모드, 최대 15m 바코드 인식)
Extended Range Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 13.5˚ ± 0.7˚
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
Min. Distance : 2 in/ 5 cm (7.5 mil)
Max. Distance : 45 ft/ 9.1 m (100 mil retro-reflective)
Near/Far 2D Imager
Technology : Auto-focus 2D imager
Light source : Auto-adaptive illumination: 617 nm highly visible LEDs
Scan Angle : 14˚ (horizontal), 8.7˚ (vertical)
Print Contrast : Down to 40%
Ambient Lighting : From 0 to 100,000 lux
Min. Distance : 6 in/ 15 cm (10 mil)
Max. Distance : 50 ft/ 15 m (300mil)
Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 47˚±3˚(typical), 35˚±3˚(narrow)
Print Contrast : Minimum 20% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
DOF : 1 to 45 in. / 2.5 to 114.3 cm
2D Imager
Technology : 752 x 480 pixels
Light source : 625 ±5 nm LEDs
Scan Angle : 40˚ (horizontal), 25˚ (vertical)
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : Max 96,900 lux (sunlight)
DOF :
5 mil code39 1.4 in./5.3cm to 7.5 in./19.1 cm
100% UPC 1.6 in./4.1cm to 12 in./30.5cm
5 mil PDF417 2.8 in./7.1cm to 4.5 in./11.4cm
다양한 키패드 선택
30-Key 및 38-Key 뉴메릭 키패드와 각각 4개 및 10개의 기능키
특정 52-Key 알파 뉴메릭키로 VT220 / TN3270 / TN5250 시스템 터미널 에뮬레이션 제공
우연한 터치에 의한 키패드 입력 오류를 방지하기 위한 키간격 유지 및 인체공학적 디자인
유연하고 효율적인 무선통신 제공
CCXv4 인증 IEEE 802.11 a/b/g/n
Bluetooth® 통신 Class II, V2.1
Push-to-talk (무전기, 동보전송 기능)
장시간 사용을 위한 주요 대안
표준 3600 mAh 뱃더리 및 대용량 5400 mAh 뱃더리 제공
최소 13 시간 계속 운용 (20초당 1번 레이저 스캐닝시)
두가지 Windows® 플랫폼 지원
Window® CE 6.0
Windows® Embedded Handheld 6.5
Android 6.0 (모델 : 9700A)
블루투스 및 무선랜 지원거리
블루투스 : 가시거리내에서 50m 지원
802.11 b/g: 가시거리 내에서 300 m 지원
802.11 a: 가시거리 내에서 250 m 지원
PERFORMANCE
Operating system : Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3
CPU : TI OMAP 3730 1GHz
Memory : 4GB Nand FLASH / 512MB DDR SDRAM
Expansion : Micro SD slot with SDHC support
Operating power : Rechargeable 3.7V 3600 mAh / 5400 mAh Li-ion Battery
Working hours1 : 13 hours
Alert : 3 LED indicators (for RF, charging status and good reading) / Vibrator/ Speaker
Interface supported : USB, RS232
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
5. iii
Revision History
Changes to the original manual are listed below:
Change Date Description
-01 Rev A 07/2010 Initial release
-02 Rev A 10/2010 Added Motorola Droid Bluetooth connection example.
-03 Rev A 2/2012 Replaced specifications with link to specification/data sheet, added battery
replacement note, add information for connecting to an iPad.
-04 Rev A 2/2013 Updated out of range behavior description.
-05 Rev A 12/2014 Zebra Rebranding
7. TABLE OF CONTENTS
About This Guide
Introduction ..................................................................................................................................... xi
Product Reference Guide – Start Here ..................................................................................... xi
Chapter Descriptions ...................................................................................................................... xi
Notational Conventions................................................................................................................... xii
Related Documents ........................................................................................................................ xiii
Service Information......................................................................................................................... xiii
Chapter 1: Getting Started
Introduction .................................................................................................................................... 1-1
Unpacking the Scanner .................................................................................................................. 1-2
The Cradle ..................................................................................................................................... 1-2
Connecting the Cradle ............................................................................................................. 1-2
Charging the Scanner Battery ........................................................................................................ 1-3
Charging via USB Host Cable .................................................................................................. 1-3
Charging via Charging Cradle .................................................................................................. 1-4
Scanner Charging LED ............................................................................................................ 1-5
Connecting to the Host Computer .................................................................................................. 1-5
Batch Connection ..................................................................................................................... 1-5
Bluetooth Connection: Development Options .......................................................................... 1-5
Bluetooth Connection Examples .............................................................................................. 1-6
Numeric Bar Codes for PIN Entry .................................................................................................. 1-24
Configuring the Scanner ................................................................................................................ 1-25
Staging Multiple Scanners ....................................................................................................... 1-25
Editing the Configuration File ................................................................................................... 1-26
8. vi CS3000 Series Scanner Product Reference Guide
Chapter 2: Scanning
Introduction .................................................................................................................................... 2-1
Scanning ........................................................................................................................................ 2-1
Deleting Bar Codes .................................................................................................................. 2-2
Transmitting Bar Code Data to Host .............................................................................................. 2-2
Transferring Data from a Batch Scanner ................................................................................. 2-2
Transferring Data from an RF Scanner .................................................................................... 2-2
User Interface Definitions .............................................................................................................. 2-3
LED Indications ........................................................................................................................ 2-3
Beeper Indications ................................................................................................................... 2-5
Chapter 3: User Preferences
Introduction .................................................................................................................................... 3-1
Scanning Sequence Examples ...................................................................................................... 3-1
Errors While Scanning ................................................................................................................... 3-1
User Preferences Default Parameters ........................................................................................... 3-2
Reset ............................................................................................................................................. 3-4
Reset Factory Defaults .................................................................................................................. 3-4
Set Date and Time ......................................................................................................................... 3-5
Set Date ................................................................................................................................... 3-5
Set Time ................................................................................................................................... 3-5
Cancel Date and Time Setting ................................................................................................. 3-5
Numeric Bar Codes for Date and Time Settings ...................................................................... 3-6
Clear Data ...................................................................................................................................... 3-7
Beeper Settings ............................................................................................................................. 3-8
Beeper Volume ........................................................................................................................ 3-8
Beeper Tone ............................................................................................................................ 3-9
Mute Beeper ............................................................................................................................ 3-10
Scanner Options ............................................................................................................................ 3-11
Scan Angle ............................................................................................................................... 3-11
Transmit “No Read” Message .................................................................................................. 3-12
Bluetooth Options .......................................................................................................................... 3-13
Bluetooth Unpair ...................................................................................................................... 3-13
Bluetooth HID Profile ............................................................................................................... 3-13
Bluetooth Serial Port Profile (SPP) .......................................................................................... 3-13
Disable All Symbologies ................................................................................................................ 3-14
Linear Code Type Security Level ................................................................................................... 3-15
Bi-directional Redundancy ............................................................................................................. 3-16
Data Options .................................................................................................................................. 3-17
Transmit Code ID Character .................................................................................................... 3-17
Prefix/Suffix Values .................................................................................................................. 3-18
Scan Data Transmission Format ............................................................................................. 3-19
Send Versions ............................................................................................................................... 3-21
Firmware Version ..................................................................................................................... 3-21
Bluetooth Version ..................................................................................................................... 3-21
Scan Engine Version ............................................................................................................... 3-21
Save Configuration ........................................................................................................................ 3-22
13. ABOUT THIS GUIDE
Introduction
The CS3000 Series Scanner Product Reference Guide provides general instructions for setting up, operating,
maintaining, and troubleshooting the scanner. The CS3000 series scanner is available in the following
configurations:
• CS3000 - USB (batch), 0.5 GB Flash
• CS3070 - USB (batch) and Bluetooth, 0.5 GB Flash
Each scanner includes a USB host cable. A charging cradle is also available for mounting, charging, and host
connection.
Product Reference Guide – Start Here
Go to the last page of this electronic manual and print it out. This is the Quick Start Instructions. This single page
provides links within the document to technical support for 99% of all customer questions.
Chapter Descriptions
Topics covered in this guide are as follows:
• Chapter 1, Getting Started provides a product overview and describes how to charge, connect, and configure
the scanner.
• Chapter 2, Scanning provides instructions for how to scan bar codes and send the data to a host, as well as
beeper and LED definitions.
• Chapter 3, User Preferences describes each user preference feature and provides the programming bar
codes for selecting these features for the scanner. It also includes wireless communication parameters and
commonly used bar codes to customize how data is transmitted to the host device.
• Chapter 4, Symbologies describes all symbology features and provides the programming bar codes for
selecting these features.
• Chapter 5, Maintenance and Technical Specifications provides information on how to care for the scanner,
troubleshooting, and technical specifications.
14. xii CS3000 Series Scanner Product Reference Guide
• Appendix A, Standard Default Parameters provides a table of all host devices and miscellaneous
scanner defaults.
• Appendix B, Programming Reference provides a table of AIM code identifiers, ASCII character
conversions, and keyboard maps.
• Appendix C, Sample Bar Codes includes sample bar codes.
Notational Conventions
The following conventions are used in this document:
• Italics are used to highlight the following:
• Chapters and sections in this and related documents
• Bold text is used to highlight the following:
• Key names on a keypad
• Button names on a screen or window.
• bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential
• Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
• Throughout the programming bar code menus, asterisks (*) are used to denote default parameter
settings.
*Baud Rate 9600 Feature/Option* Indicates Default
NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note
will not result in physical harm to the reader, equipment or data.
CAUTION This symbol indicates that if this information is ignored, the possiblity of data or material damage may
occur.
WARNING! This symbol indicates that if this information is ignored the possibility that serious personal
injury may occur.
15. About This Guide xiii
Related Documents
• CS3000 Series Scanner Quick Reference Guide (p/n 72-136598-xx) provides general information to help
the user get started with the scanner, including basic setup and operation instructions.
For the latest version of this guide and all guides, go to: http://www.zebra.com/support.
Service Information
If you have a problem using the equipment, contact your facility's technical or systems support. If there is a
problem with the equipment, they will contact the Zebra Global Customer Support Center at:
http://www.zebra.com/support.
When contacting Zebra support, please have the following information available:
• Serial number of the unit
• Model number or product name
• Software type and version number
Zebra responds to calls by e-mail, telephone or fax within the time limits set forth in service agreements.
If your problem cannot be solved by Zebra support, you may need to return your equipment for servicing and
will be given specific directions. Zebra is not responsible for any damages incurred during shipment if the
approved shipping container is not used. Shipping the units improperly can possibly void the warranty.
If you purchased your business product from a Zebra business partner, please contact that business partner
for support.
17. CHAPTER 1 GETTING STARTED
Introduction
The CS3000 Series Scanner captures and stores bar codes for a variety of uses, and transmits bar code data
to a host via USB connection or Bluetooth.
Figure 1-1 CS3000 Series Scanner
This scanner supports the following host interfaces:
• USB - The scanner connects to a USB host as a removable storage device, via a cradle or USB cable.
• Bluetooth - The scanner supports Bluetooth HID connection to a host (the default) where the scanner
emulates a keyboard, as well as Serial Port Profile (SPP) connection where the scanner behaves as if
there is a serial connection.
Mini-USB Port
Scan Button LED
Bluetooth Button/LED
Delete Button
Protective Cover
Reset Button
18. 1 - 2 CS3000 Series Scanner Product Reference Guide
Unpacking the Scanner
Remove the scanner from its packing and inspect it for damage. If the scanner was damaged in transit, contact
Zebra support. See page xiii for contact information. KEEP THE PACKING. It is the approved shipping
container and should be used if the equipment ever needs to be returned for servicing.
The Cradle
The cradle sits on a desktop and serves as a stand, charger, and USB communication device for the CS3000
series scanner. The cradle does not require a separate power supply to charge the scanner.
Figure 1-2 Cradle
Connecting the Cradle
Insert the cradle’s interface cable into a USB port on the host.
Figure 1-3 Connecting the Cables to the Cradle
19. Getting Started 1 - 3
Charging the Scanner Battery
To charge the CS3000 series scanner, connect it to a host PC via the USB host cable or charging cradle. No
power supply is necessary. Charge time is approximately three hours for a fully discharged battery.
Charging via USB Host Cable
1. Insert the mini-USB connector on the host cable in the interface port on the scanner.
2. Connect the other end of the host cable to a USB port on the host PC.
Figure 1-4 Connecting Scanner to Host PC
The scanner begins charging. A complete charge of a fully discharged battery takes approximately three
hours. Charge within the recommended temperature of 32° to 104° F (0° to 40° C).
NOTE To check the battery charge status, hold the scan (+) button for 15 seconds. See Battery charge status in
Table 2-1 on page 2-3.
NOTE An authorized Zebra repair facility can replace the CS3000 battery. Changing the battery does not affect
bar code data which is stored in non-volatile memory, however the date and time is lost upon changing the
battery or if the battery completely loses charge.
20. 1 - 4 CS3000 Series Scanner Product Reference Guide
Charging via Charging Cradle
1. Insert the cradle’s USB connector into a USB port on the host PC.
Figure 1-5 Connecting Cradle to Host PC
2. Remove the protective cover from the scanner.
3. Place the scanner in the cradle, ensuring the mini-USB connector in the cradle inserts into the interface
port on the scanner.
Figure 1-6 Inserting Scanner in Cradle
The scanner begins charging. A complete charge of a fully discharged battery takes approximately three
hours. Charge within the recommended temperature of 32° to 104° F (0° to 40° C).
21. Getting Started 1 - 5
Scanner Charging LED
The scanner’s LED indicates charging activity (see Table 2-1 on page 2-3). The amber LED blinks slowly
during charging. The scanner’s LED turns solid green when the battery is fully charged.
Connecting to the Host Computer
Batch Connection
See Charging the Scanner Battery on page 1-3 for instructions on connecting the scanner to a host PC via
USB.
Bluetooth Connection: Development Options
Serial Port Profile
This Bluetooth profile emulates a serial cable to provide a simply implemented wireless replacement for
existing RS-232 based serial communications applications, including familiar control signals. It is the preferred
communication profile implementation because accidental key strokes from the keyboard or touch screen on
the host are not entered into the bar code data stream.
Human Interface Device Emulation
This Bluetooth profile is a lightweight wrapper of the Human Interface Device protocol defined for USB. Data
transmitted from the Bluetooth scanner appears as keyboard entries to the Bluetooth host (Smartphone, PC,
etc).
NOTE To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host (applies to CS3070
model only).
NOTE Wedge data appears within whichever application has input focus.
22. 1 - 6 CS3000 Series Scanner Product Reference Guide
Bluetooth Connection Examples
This section provides the following connection examples:
• Droid X HID pairing Example
• PC HID Pairing Example on page 1-7
• PC SPP Pairing Example on page 1-10
• Windows Mobile Device (ES400) HID Pairing Example on page 1-13
• Windows Mobile Device (ES400) SPP Pairing Example on page 1-17
• iPad Pairing Example on page 1-21
Overview
Pairing the CS3070 with a host device typically requires entering a pairing PIN on both the CS3070 and the
host device. To enter the PIN on the CS3070, use the Numeric Bar Codes for PIN Entry on page 1-24. For the
host device, use the data entry method required for that device to enter the PIN.
Droid X HID Pairing Example
For CS3070 scanners, to pair to a Droid X via HID:
1. Press the scan button (+) to wake the scanner.
2. Press and hold the Bluetooth button (round button with logo) for five seconds. The scanner beeps and the
Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host.
3. On the Droid X, press the Settings button (bottom left hard button).
4. Tap Settings from the list of options that appears.
5. Tap Wireless & networks.
6. Tap Bluetooth to enable Bluetooth.
7. Tap the Bluetooth settings option.
8. Tap Scan for devices. The CS3070 appears in the Bluetooth devices list, indicated by its model name and
serial number.
9. Select the CS3070 from the list. A window prompts for the PIN.
10. Tap the text box to open the soft keyboard. Enter the PIN using the keyboard and tap Ok.
11. With the CS3070, scan the PIN using the Numeric Bar Codes for PIN Entry on page 1-24 and scan Enter.
The scanner beeps to indicate it has paired with the Droid, and the Droid displays Connected to hid below
the CS3070 device name.
To display scanned data on the Droid:
1. Tap and hold the screen to display the Add to Home screen menu.
2. Select widgets.
3. Scroll down the menu and select Sticky Note.
NOTE HID is the default profile for the CS3070. If this was changed, scan Bluetooth HID Profile on page 3-13.
23. Getting Started 1 - 7
4. Tap Sticky Note to display the text entry screen.
5. Tap in the text entry field and scan a bar code. The bar code contents appear in the text entry field.
PC HID Pairing Example
For CS3070 scanners, to pair to a Bluetooth-enabled PC or laptop via HID:
1. Press the scan button (+) to wake the scanner.
2. Press and hold the Bluetooth button (round button with logo) for five seconds. The scanner beeps and the
Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host.
3. On the host PC, launch the third party Bluetooth pairing application. Following is a sample window of such
an application.
Figure 1-7 Sample Bluetooth Application Window
NOTE If the host does not support Bluetooth communication, a third-party Bluetooth adapter is required.
NOTE HID is the default profile for the CS3070. If this was changed, scan Bluetooth HID Profile on page 3-13.
24. 1 - 8 CS3000 Series Scanner Product Reference Guide
4. Place the application into discover Bluetooth device mode (in this example, select the check box), and click
Next.
Figure 1-8 Sample Device Discovery Window
5. Select the CS3070 device from the discovered device list. The Bluetooth application may prompt you to
scan a passkey it generated, or for you to create and then scan a passkey (PIN).
Figure 1-9 Sample Passkey Option Window
25. Getting Started 1 - 9
6. Select an option, then click Next:
• If you select Choose a passkey for me, the host generates and displays a passkey.
• If you select Use the passkey found in the documentation, enter the default 1234.
• If you select Let me choose my own passkey, enter any passkey.
7. Scan Numeric Bar Codes for PIN Entry on page 1-24 corresponding to the passkey, then scan the Enter
bar code.
Figure 1-10 Sample Bluetooth Pairing Completion Window
26. 1 - 10 CS3000 Series Scanner Product Reference Guide
8. Click Finish to complete the pairing. The device appears in the Bluetooth Devices window.
Figure 1-11 Bluetooth Devices Window
9. Select the device, then click Add... The CS3070 issues a two-tone beep and the Bluetooth button blinks
slowly to indicate that the scanner paired with the host.
PC SPP Pairing Example
For CS3070 scanners, to pair to a Bluetooth-enabled PC or laptop via SPP:
1. Press the scan button (+) to wake the scanner.
2. Scan Bluetooth Serial Port Profile (SPP) on page 3-13. The Bluetooth button starts blinking quickly to
indicate that the scanner is discoverable by the host.
NOTE Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable
automatically re-establishes the Bluetooth pairing.
NOTE If the host does not support Bluetooth communication, a third-party Bluetooth adapter is required.
27. Getting Started 1 - 11
3. On the host PC, launch the third party Bluetooth pairing application. Following is a sample window of such
an application.
Figure 1-12 Sample Bluetooth Application Window
4. Place the application into discover Bluetooth device mode (in this example, select the check box), and click
Next.
Figure 1-13 Sample Device Discovery Window
28. 1 - 12 CS3000 Series Scanner Product Reference Guide
5. Select the CS3070 device from the discovered device list. The Bluetooth application may prompt you to
scan a passkey it generated, or for you to create and then scan a passkey (PIN).
Figure 1-14 Sample Passkey Option Window
6. For SPP, select Use the passkey found in the documentation, then enter the default passkey 1234 in the text
box. Click Next.
Figure 1-15 Sample Bluetooth Pairing Completion Window
NOTE For SPP, the host requires entering a PIN, but no PIN entry is required for the CS3070.
29. Getting Started 1 - 13
7. Click Finish. In order to complete the pairing, open a serial input application such as HyperTerminal. The
CS3070 issues a two-tone beep and the Bluetooth button blinks slowly to indicate that the scanner paired
with the host.
Windows Mobile Device (ES400) HID Pairing Example
To pair to a ES400 Windows Mobile 6.5 device via HID:
1. Press the scan button (+) to wake the scanner.
2. Press and hold the Bluetooth button (round button with logo) for five seconds. The scanner beeps and the
Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the ES400.
3. On the ES400, launch the third party Bluetooth pairing application. Following is a sample window of such
an application.
Figure 1-16 Sample Bluetooth Application - Add Device Window
NOTE Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable
automatically re-establishes the Bluetooth pairing.
NOTE HID is the default profile for the CS3070. If this was changed, scan Bluetooth HID Profile on page 3-13.
30. 1 - 14 CS3000 Series Scanner Product Reference Guide
4. Tap Add new device.... The ES400 searches for Bluetooth devices.
Figure 1-17 Sample Device Discovery Window
5. Select the CS3070 device from the discovered device list and tap Next. The device prompts you to enter a
passcode.
Figure 1-18 Enter Passcode Window
6. Tap Next if you don’t require a passcode, or enter any passcode and then tap Next.
31. Getting Started 1 - 15
7. If you entered a passcode in Step 6, scan Numeric Bar Codes for PIN Entry on page 1-24 corresponding to
that code, then scan the Enter bar code.
Figure 1-19 Connection Verification Window
8. Select Yes on the pop-up window to add the device to the device list.
Figure 1-20 Discovered Devices List
32. 1 - 16 CS3000 Series Scanner Product Reference Guide
9. Select the device and tap Connect to complete the pairing. The device appears in the Connected list, and
the CS3070 issues a two-tone beep and the Bluetooth button blinks slowly to indicate that the scanner
paired with the host.
Figure 1-21 Discovered Devices List
NOTE Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable
automatically re-establishes the Bluetooth pairing.
33. Getting Started 1 - 17
Windows Mobile Device (ES400) SPP Pairing Example
For CS3070 scanners, to pair to a ES400 Windows Mobile 6.5 device via SPP:
1. Press the scan button (+) to wake the scanner.
2. Scan Bluetooth Serial Port Profile (SPP) on page 3-13. The Bluetooth button starts blinking quickly to
indicate that the scanner is discoverable by the ES400.
3. On the ES400, launch the third party Bluetooth pairing application. Following is a sample window of such
an application.
Figure 1-22 Sample Bluetooth Application Window - Add Device Window
34. 1 - 18 CS3000 Series Scanner Product Reference Guide
4. Tap Add new device.... The ES400 searches for Bluetooth devices.
Figure 1-23 Sample Device Discovery Window
5. Select the CS3070 device from the discovered device list and tap Next. The device prompts you to enter a
passcode.
Figure 1-24 Sample Enter Passcode Window
35. Getting Started 1 - 19
6. Enter the CS3070 default PIN (1234) and tap Next.
Figure 1-25 Connection Verification Window
7. Select Yes on the pop-up window to add the device to the device list.
Figure 1-26 Discovered Devices List
NOTE For SPP, on the host PC a PIN entry is required, but no PIN entry is required on the CS3070 device side.
36. 1 - 20 CS3000 Series Scanner Product Reference Guide
8. Select the device and tap Connect. The Partnership Settings window appears.
Figure 1-27 Partnership Settings Window
9. Tap Serial Port and then Save to complete the pairing. The device appears in the Connected list, and the
CS3070 issues a two-tone beep and the Bluetooth button blinks slowly to indicate that the scanner paired
with the ES400.
Figure 1-28 Discovered Devices List
NOTE Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable
automatically re-establishes the Bluetooth pairing.
37. Getting Started 1 - 21
iPad Pairing Example
For CS3070 scanners, to pair to an iPad:
1. Press the scan button (+) to wake the scanner.
2. Press and hold the Bluetooth button (round button with logo) for five seconds. The scanner beeps and the
Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host.
3. On the iPad, tap the Settings icon.
4. Tap General from the list of options that appears.
Figure 1-29 General Menu
5. Tap Bluetooth. If Bluetooth is not enabled, swipe to enable it. The CS3070 appears in the Devices list,
indicated by its model name and serial number.
Figure 1-30 Bluetooth Devices
NOTE HID is the default profile for the CS3070. If this was changed, scan Bluetooth HID Profile on page 3-13.
38. 1 - 22 CS3000 Series Scanner Product Reference Guide
6. Select the CS3070 from the list. A window prompts for a PIN generated by the iPad.
Figure 1-31 Pin Prompt
7. With the CS3070, scan the PIN using the Numeric Bar Codes for PIN Entry on page 1-24 and scan Enter.
The scanner beeps to indicate it has paired with the iPad, and the iPad displays Connected next to the
CS3070 device name.
To display scanned data on the iPad:
1. Tap the Notes icon to display the Notes text entry screen.
2. Scan a bar code. The bar code contents appear in the Note.
Figure 1-32 Note with Keyboard
NOTE To enter keypad data with the scanned data, press the delete key ( - ) on the CS3070 to invoke the
keyboard on the iPad. Press this key again to toggle off the keyboard.
39. Getting Started 1 - 23
Unpairing
To temporarily unpair the scanner and host, press the Bluetooth button. This disables Bluetooth and the
Bluetooth button stops blinking. Pressing the Bluetooth button again re-pairs the scanner with the host.
To permanently unpair the scanner and host, scan Unpair on page 3-13. This allows the scanner to pair to a
different host device.
Deleting the CS3070 from the Device List
To delete the device from the discovered devices list, tap and old the device and select Delete.
Figure 1-33 Deleting Device
NOTE To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host (applies to CS3070
model only).
40. 1 - 24 CS3000 Series Scanner Product Reference Guide
Numeric Bar Codes for PIN Entry
Use the following bar codes for pin entry for Bluetooth connection.
0
1
2
3
4
5
6
7
8
9
Enter
41. Getting Started 1 - 25
Configuring the Scanner
To configure the scanner for initial use:
1. Scan the parameter bar codes in Chapter 3, User Preferences and Chapter 4, Symbologies to customize
scanner operation.
2. Scan the Save Configuration bar code on page 3-22 (also provided below).
Save Configuration
3. For additional customization, edit the Config.ini file on the scanner using the options in Editing the
Configuration File on page 1-26.
4. CS3070 only: When deploying the new configuration to multiple scanners, to ensure unique CS3070 serial
numbers appear in the host’s discovery window, edit the Config.ini file to either remove the BTName entry
or set it to blank (“BTName=”) to ensure that each scanner uses the default BT name of
CS3070:<serial number>.
Staging Multiple Scanners
After creating a config.ini file for one “golden” scanner with all desired settings, create a copy of the file from
this scanner and copy it to other scanners via USB connection. Set the time and date on the “cloned” scanners
by scanning bar codes from Set Date and Time on page 3-5.
NOTE When scanning parameter bar codes, scan each bar code within two minutes of the previous one. The
scanner enters sleep mode after two minutes of inactivity, and any parameter bar codes scanned and not
saved are ignored.
NOTE CS3070 only: When deploying the new configuration to multiple scanners, to ensure unique CS3070
serial numbers appear in the host’s discovery window, edit the Config.ini file to either remove the
BTName entry or set it to blank (“BTName=”) to ensure that each scanner uses the default BT name of
CS3070:<serial number>.
NOTE Before deploying the Config.ini file to multiple scanners, make the file read only to prevent users from
overwriting the file when scanning Save Configuration or Reset Factory Defaults on page 3-4.
42. 1 - 26 CS3000 Series Scanner Product Reference Guide
Editing the Configuration File
Use a text editor such as Notepad to set configuration values in the Config.ini editable text file in the
Parameters folder on the CS30XX. Table 1-1 lists the programmable contents of the file.
NOTE If you make errors while editing the Config.ini file, the file LOG.TXT is created in the Parameters folder.
Consult this log file to determine the errors and make corrections.
Table 1-1 Config.ini File Content
Parameter Values Description Default
BarcodeFile String In batch mode, the name of the batch file
containing bar codes scanned.
BARCODES.TXT
BarcodeDB String Bar code database filename. If the
database file exists scanned bar codes
are checked against its content. If the bar
code exists within the database, the
scanner issues a positive beep, if not a
negative beep. To engage this mode,
create the BarcodeDB.txt file on the
CS30XX. Note that if this mode is
engaged, no bar code data is saved to the
scanner.
DBASE.TXT
BTPin String Default SPP PIN. 1234
BTName String Bluetooth device name (address) used
during discovery.
CS3070:<serial
number>
BTProfile HID
SPP
Selected BT profile. HID
Mute On
Off
Mute the beeper. Off
Prefix Character Prefix character. <none>
Suffix Character Suffix character. 0x0D (CR)
Separator Character Separator character. ','
DateFormat MM/DD/YY
DD/MM/YY
MM/DD/YYYY
DD/MM/YYYY
Date format for batch data. Set to enable
date stamp. See Set Date on page 3-5 to
set the date.
Enter no value to disable the date stamp,
for example: “DateFormat = “
MM/DD/YY
(Enabled)
TimeFormat 12h
24h
Time format for batch data. Set to enable
time stamp. See Set Time on page 3-5 to
set the time.
Enter no value to disable the time stamp,
for example: “TimeFormat = “
24h
(Enabled)
43. Getting Started 1 - 27
ScanParam Variable Any scan engine parameter. Multiple
entries are allowed. Sent after reset or
when engine is powered.
For example:
ScanParam=0xf0,0x00,0x01
ScanParam=0xee,0x01
ScanParam=0x38,0x00
<none>
Sleep Integer Time in seconds before the scanner
enters sleep mode when no activity is
detected.
120 (2 minutes)
BTSleep Integer Time in seconds before the scanner
enters sleep mode while paired to another
Bluetooth device when no activity is
detected.
600 (10 minutes)
ButtonPlus Enabled
Disabled
Enable or disable the Plus button. Enabled
ButtonMinus Enabled
Disabled
Enable or disable the Minus button. Enabled
ButtonBT Enabled
Disabled
Enable or disable the BT button. Enabled
WakeUpLED Enabled
Disabled
Enable or disable the wake-up LEDs. Enabled
LEDBlue Enabled
Disabled
Enable or disable the blue LED for normal
operation and wake up.
Enabled
LEDGreen Enabled
Disabled
Enable or disable the green LED for
normal operation and wake up
Enabled
LEDRed Enabled
Disabled
Enable or disable the red LED for normal
operation and wake up.
Enabled
LEDAmber Enabled
Disabled
Enable or disable the amber LED for
normal operation and wake up.
Enabled
CodeID Enabled
Disabled
Enable or disable saving CodeID in the
scanned bar codes file. See Code Type
IDs on page B-1.
Enabled
ScanLED Enabled
Disabled
Enable or disable the LEDs that illuminate
while the laser scanner is active.
Enabled
Table 1-1 Config.ini File Content (Continued)
Parameter Values Description Default
44. 1 - 28 CS3000 Series Scanner Product Reference Guide
45. CHAPTER 2 SCANNING
Introduction
This chapter provides instructions for how to scan bar codes and send the data to a host. Beeper and LED
definitions are also included.
Scanning
See Chapter 1, Getting Started to install and program the scanner. To scan:
1. Aim the scanner at the bar code.
2. Press the scan (+) button.
Figure 2-1 Scanning
3. Ensure the scan line crosses every bar and space of the symbol.
012345
WRONG
012345
RIGHT
46. 2 - 2 CS3000 Series Scanner Product Reference Guide
4. The scanner beeps and the LED turns green to indicate a successful decode. See Table 2-1 and Table 2-2
for beeper and LED definitions.
Deleting Bar Codes
In batch mode, to delete a bar code aim the scanner at the bar code and press the delete ( - ) button.
Figure 2-2 Deleting a Bar Code in Batch Mode
Transmitting Bar Code Data to Host
Transferring Data from a Batch Scanner
The BarcodeFile.txt file within the Scanned Barcodes directory on the scanner stores scanned bar code data.
Connect the scanner to the host PC via USB host cable or the charging cradle and use Windows Explorer to
navigate to the scanner. Copy the bar code data file to the host
To clear the bar code data, delete the BarcodeFile.txt file from the scanner, or scan the Clear Data bar code on
page 3-7.
Autorun Feature
The scanner supports an autorun feature where you can build an autorun.inf file to automatically copy the data
to the host upon connection. Autorun.inf is a text-based configuration file that defines, upon connecting the
scanner, which executable or application to run on the host, which icon represents the scanner, and which
menu commands appear when you right-click the scanner icon from Windows Explorer. For more information,
search autorun.inf on any search engine.
Transferring Data from an RF Scanner
When the scanner is paired to a host via Bluetooth, data transmits to the host after each scan and is not stored
on the device.
NOTE The scanner cannot scan bar codes when it is connected to the host via the USB host cable.
NOTE Bar codes cannot be deleted in Bluetooth mode.
47. Scanning 2 - 3
Out of Range Behavior
If the scanner moves out of range of the host, and does not re-pair with the host within the timeout period,
scanned data is lost and the scanner emits a 3-beep error tone.
When the radio loses connection, the Bluetooth LED stops its slow, consistent blinking and the beeper emits a
short high low beep. The Bluetooth LED blinks at a faster rate for a period of time while the device attempts to
reestablish pairing with the host, and when it returns within range the device repairs. If repairing is
unsuccessful the Bluetooth LED stops blinking.
To manually reestablish paring when the device returns to range, press the Bluetooth LED button. Upon
Bluetooth pairing, the beeper emits a short low high beep and the Bluetooth LED starts its slow, consistent
blinking again.
User Interface Definitions
The scanner uses beeper and LED sequences to indicate various system events. Table 2-1 and Table 2-2
define these sequences and events.
LED Indications
Table 2-1 LED Indications
Function Performed User Action LED Feedback Other
Scan attempt Press scan (+)
button
Flashing green Laser on
Successful bar code scan Solid green Laser off
Battery charge status Hold scan (+)
button 15 seconds
Flashing green Full charge (for 8 hours at 6
scans per minute)
Flashing amber Less than 8 hours but more
then one of operating time
Flashing red Less than 1 hour of operating
time
Delete bar code
(when in batch mode)
Press & hold
delete (-) button
Flashing amber Laser on
Successful bar code deletion Solid amber Laser off
Unsuccessful deletion - item
doesn't exist (when in batch
mode)
Solid red Laser off
Clear all bar code data
(when delete (-) button enabled)
Press & hold
delete (-) button 3
seconds past scan
time
Flashing amber Laser on
Successful clear all Solid amber Laser off
48. 2 - 4 CS3000 Series Scanner Product Reference Guide
Charge scanner Connect scanner
to a host PC USB
port
Flashing amber Scanner connects in mass
storage mode, auto-run
application on PC launches
Charge complete Solid green
Toggle data protection on or off
(when enabled)
Press & hold both
scan (+) and
delete (-) buttons
for 6 seconds
None
Successful data protection setting Solid amber
Enable Bluetooth radio Hold Bluetooth
button for 5
seconds
Rapidly flashing blue
LED
Bluetooth is enabled but has
not paired with a host
Bluetooth radio pairing Press Bluetooth
button
Slowly flashing blue
LED
Bluetooth radio paired with host
and in range
Very slowly flashing
blue LED
Bluetooth radio out of range of
host
Blue LED is off Stops transmitting beacons
Bluetooth radio returns to
communication range of host
Press any button Very slowly flashing
blue LED
Re-pairs device with host
Special Conditions
Memory low scan Press & hold scan
(+) button
Flashing red, then
normal operation
Delete/Clear All Press & hold
delete (-) button
Normal operation
Memory Full Scan Press & hold scan
(+) button
Solid red
Memory Full Delete/Clear All Press & hold
delete (-) button
Normal operation
Battery low indication - Scan Delete/Clear All
When enabled Normal operation Solid red, then
normal operation
When enabled and
performance disabled
Normal operation Solid red for 3
seconds
No decode or upload
When disabled and
performance enabled
Normal operation Normal operation
When disabled and
performance disabled
Normal operation None No decode or upload
Table 2-1 LED Indications (Continued)
Function Performed User Action LED Feedback Other
49. Scanning 2 - 5
Beeper Indications
Data protection (enabled and on) Scan/function/host
com
Rapidly flashing red
Unexpected failure Scan/function/dock Flashing red, green
and amber for 5
seconds
Contact support
Battery depleted Scan/function/dock None
Table 2-1 LED Indications (Continued)
Function Performed User Action LED Feedback Other
Table 2-2 Beeper Indications
Function Performed Beeper Feedback Other
Successful bar code scan Short high tone Laser off
Successful bar code deletion Short medium tone Laser off
Unsuccessful deletion - item doesn't
exist (when in batch mode)
Long short short Laser off
Successful clear all 2 long medium tones Laser off
Successful data protection setting Short long short
Connect scanner to a host PC USB
port to charge scanner
Low high
Enable Bluetooth radio Short beep Hold Bluetooth button for 5 seconds
Bluetooth radio pairing Short low high
Bluetooth radio out of range of host Short high low Stops transmitting beacons
Bluetooth radio returns to
communication range of host
Short low high Re-pairs device with host
Attempt to scan when out of
Bluetooth radio range
4 high tones No Bluetooth transmission
Memory Full Scan Long tones for 5 seconds or
until scan button released
50. 2 - 6 CS3000 Series Scanner Product Reference Guide
51. CHAPTER 3 USER PREFERENCES
Introduction
This chapter describes each user preference feature and provides the programming bar codes for selecting
these features for the scanner.
The scanner ships with the settings shown in the User Preferences Default Table on page 3-2 (also see
Appendix A, Standard Default Parameters for all host device and miscellaneous scanner defaults). If the
default values suit the requirements, programming is not necessary. To change these values, scan a single bar
code or a short bar code sequence. After scanning Save Configuration on page 3-22, the new settings are
stored in non-volatile memory and are preserved when the scanner powers down.
To return all features to their default values, scan the Reset Factory Defaults bar code on page 3-4. Throughout
the programming bar code menus, default values are indicated with asterisks (*).
Scanning Sequence Examples
In most cases, scan only one bar code to set a parameter value. For example, to set the beeper tone to high,
scan the High Frequency (beeper tone) bar code under Beeper Tone on page 3-9. The scanner issues a fast
warble beep and the LED turns green, indicating a successful parameter entry.
Other parameters, such as Data Transmission Formats, require scanning several bar codes. See the
parameter description for this procedure.
Errors While Scanning
Unless otherwise specified, if an error is made during a scanning sequence, re-scan the correct parameter.
*High Frequency Feature/Option* Indicates Default
52. 3 - 2 CS3000 Series Scanner Product Reference Guide
User Preferences Default Parameters
Table 3-1 lists the defaults for user preference parameters. To change any option, scan the appropriate bar
code(s) provided in this chapter.
NOTE See Appendix A, Standard Default Parameters for all default parameters.
Table 3-1 User Preferences Default Table
Parameter
Parameter Number
(Hex)
Factory Default
Page
Number
Reset N/A 3-4
Reset Factory Defaults N/A 3-4
Set Date N/A 3-5
Set Time N/A 3-5
Cancel Date and Time Settings N/A 3-5
Clear Data N/A 3-7
Beeper Volume 0x8C Medium 3-8
Beeper Tone 0x91 Medium Frequency 3-9
Mute Beeper N/A Do Not Mute 3-10
Scan Angle 0xBF Wide (47°) 3-11
Transmit “No Read” Message 0x5E Disable 3-12
Bluetooth Unpair N/A 3-13
Bluetooth HID Profile N/A 3-13
Bluetooth Serial Port Profile (SPP) N/A 3-13
Disable All Symbologies N/A 3-14
Linear Code Type Security Levels 0x4E 1 3-15
Bi-directional Redundancy 0x43 Disable 3-16
Data Options
Transmit Code ID Character 0x2D None 3-17
Prefix/Suffix Values
Prefix
Suffix 1
Suffix 2
0x69
0x68
0x6A
NULL
LF
CR
3-18
Scan Data Transmission Format 0xEB Data as is 3-19
Send Firmware Version N/A 3-21
53. User Preferences 3 - 3
Send Bluetooth Version N/A 3-21
Send Scan Engine Version N/A 3-21
Save Configuration N/A 3-22
Table 3-1 User Preferences Default Table (Continued)
Parameter
Parameter Number
(Hex)
Factory Default
Page
Number
54. 3 - 4 CS3000 Series Scanner Product Reference Guide
Reset
To reset the scanner and apply parameters from the configuration file, scan the following bar code.
Reset
Reset Factory Defaults
To reset the scanner to factory defaults, scan the following bar code. This rebuilds the configuration file from
program memory.
Reset Factory Defaults
55. User Preferences 3 - 5
Set Date and Time
Set Date
Scan the Set Date bar code, then scan six numeric digits in the format mmddyy from Numeric Bar Codes for
Date and Time Settings on page 3-6 (first two for the month, second two for the day, third two for the year).
Set Date
Set Time
Scan the Set Time bar code, then scan four numeric digits in the format hhmm from Numeric Bar Codes for
Date and Time Settings on page 3-6 representing the time according to the 24 hour clock (first two for the hour,
second two for the minute).
For example, to set the time to 8:45 in the morning, scan the following bar code, then scan 0, 8, 4, 5. To set the
time to 3:07 in the afternoon, scan 1, 5, 0, 7.
Set Time
Cancel Date and Time Setting
Scan the Cancel Set Date/Time bar code to cancel the date and time settings.
Cancel Set Date/Time
NOTE You must scan the configuration bar codes to set the time and date stamp on the scanner. The time and
date can not be set or edited in the config.ini file. This setting persists for three months if the scanner is
not used.
NOTE To change the date format from mmddyy, see DateFormat on page 1-26.
NOTE To change the time format between 12h and 24h, see TimeFormat on page 1-26.
56. 3 - 6 CS3000 Series Scanner Product Reference Guide
Numeric Bar Codes for Date and Time Settings
0
1
2
3
4
5
6
7
8
9
Enter
57. User Preferences 3 - 7
Clear Data
Scan the following bar code to clear all batch bar code data on the scanner. This deletes the BarcodeFile.txt
from the scanner.
Clear Data
58. 3 - 8 CS3000 Series Scanner Product Reference Guide
Beeper Settings
Beeper Volume
Parameter # 0x8C
To select a decode beep volume, scan the appropriate bar code.
Low
(0x02)
*Medium
(0x01)
High
(0x00)
59. User Preferences 3 - 9
Beeper Tone
Parameter # 0x91
To select a decode beep frequency (tone), scan the appropriate bar code.
Low Frequency
(0x02)
*Medium Frequency
(0x01)
High Frequency
(0x00)
60. 3 - 10 CS3000 Series Scanner Product Reference Guide
Mute Beeper
Scan the Mute Beeper bar code to mute the beeper.
Mute Beeper
(0x01)
*Do Not Mute Beeper
(0x00)
61. User Preferences 3 - 11
Scanner Options
Scan Angle
Parameter # 0xBF
This parameter sets the scan angle to narrow or wide.
Narrow Angle (35°)
(0x05)
*Wide Angle (47°)
(0x06)
NOTE The allowed values for this setting are different for some legacy models of scanners. These old values can
still be used and are interpreted by the scanner as follows.
0x00 - 0x05 0x06 - 0x2C 0x2D - 0x4A 0x4B - 0xFF
Narrow (0x05) Wide (0x06) Narrow (0x05) Wide (0x06)
62. 3 - 12 CS3000 Series Scanner Product Reference Guide
Transmit “No Read” Message
Parameter # 0x5E
Enable this option to transmit “NR” if a symbol does not decode during the timeout period or before the trigger
is released. Any enabled prefix or suffixes are appended around this message.
Disable this to send no message to the host if a symbol does not decode.
Enable No Read
(0x01)
*Disable No Read
(0x00)
63. User Preferences 3 - 13
Bluetooth Options
Bluetooth Unpair
Scan the following bar code to unpair the scanner from the host.
Unpair
Bluetooth HID Profile
Scan Bluetooth HID Profile to cause the scanner to emulate a keyboard.
Bluetooth HID Profile
Bluetooth Serial Port Profile (SPP)
Scan Bluetooth SPP to cause the scanner to emulate a serial connection.
Bluetooth SPP
64. 3 - 14 CS3000 Series Scanner Product Reference Guide
Disable All Symbologies
Scan the bar code below to disable the decoding of all symbologies. Use this to simplify selecting a single
symbology to decode by scanning this, then scanning the desired enable code type bar code. Note that the
scanner can still decode parameter bar codes.
Disable All Symbologies
65. User Preferences 3 - 15
Linear Code Type Security Level
Parameter # 0x4E
The scanner offers four levels of decode security for linear code types (e.g., Code 39, Interleaved 2 of 5).
Select higher security levels for decreasing levels of bar code quality. As security levels increase, the
scanner’s aggressiveness decreases.
Select the security level appropriate for your bar code quality.
Linear Security Level 1
The scanner must read the following code types twice before decoding:
*Linear Security Level 1
(0x01)
Linear Security Level 2
The scanner must read all code types twice before decoding.
Linear Security Level 2
(0x02)
Code Type Length
Codabar All
MSI 4 or less
D 2 of 5 8 or less
I 2 of 5 8 or less
66. 3 - 16 CS3000 Series Scanner Product Reference Guide
Linear Security Level 3
The scanner must read code types other than the following twice before decoding. It must read the following
codes three times:
Linear Security Level 3
(0x03)
Linear Security Level 4
The scanner must read all code types three times before decoding.
Linear Security Level 4
(0x04)
Bi-directional Redundancy
Parameter # 0x43
This parameter is only valid when a Linear Code Type Security Level is enabled. When this parameter is
enabled, the scanner must scan a bar code successfully in both directions (forward and reverse) before
decoding.
Enable Bi-directional Redundancy
(0x01)
*Disable Bi-directional Redundancy
(0x00)
Code Type Length
MSI 4 or less
D 2 of 5 8 or less
I 2 of 5 8 or less
67. User Preferences 3 - 17
Data Options
Transmit Code ID Character
Parameter # 0x2D
A code ID character identifies the code type of a scanned bar code. This can be useful when decoding more
than one code type. The code ID character is inserted between the prefix character (if selected) and the
decoded symbol.
Select no code ID character, a Symbol Code ID character, or an AIM Code ID character. The Symbol Code ID
characters are listed below. See Appendix B, Programming Reference for AIM Code Identifiers.
• A = UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13
• B = Code 39, Code 32
• C = Codabar
• D = Code 128, ISBT 128
• E = Code 93
• F = Interleaved 2 of 5
• G = Discrete 2 of 5
• J = MSI
• K = GS1-DataBar
• L = Bookland EAN
• M = Trioptic Code 39
• N = Coupon Code
• R = GS1 DataBar-14, GS1 DataBar Limited, GS1 DataBar Expanded.
Symbol Code ID Character
(0x02)
Aim Code ID Character
(0x01)
*None
(0x00)
68. 3 - 18 CS3000 Series Scanner Product Reference Guide
Prefix/Suffix Values
Parameter # P = 0x69, S1 = 0x68, S2 = 0x6A
Append a prefix and/or one or two suffixes to scan data for data editing. To set these values, scan a four-digit
number (i.e., four bar codes) that corresponds to ASCII values. See Table B-6 on page B-7 and Numeric Bar
Codes on page 4-48. To change the selection or cancel an incorrect entry, scan Cancel on page 4-50. To set
the Prefix/Suffix values via serial commands, see Setting Prefixes and Suffixes on page B-7.
Scan Prefix
Scan Suffix 1
Scan Suffix 2
Data Format Cancel
NOTE In order to use Prefix/Suffix values, set the Scan Data Transmission Format on page 3-19.
NOTE The CS3000 series scanner does not support ADF, however it does allow setting prefix and suffix values
via parameter bar codes.
69. User Preferences 3 - 19
Scan Data Transmission Format
Parameter # 0xEB
To change the Scan Data Transmission Format, scan one of the following bar codes corresponding to the
desired format.
*Data As Is
(0x00)
<DATA> <SUFFIX 1>
(0x01)
<DATA> <SUFFIX 2>
(0x02)
<DATA> <SUFFIX 1> <SUFFIX 2>
(0x03)
71. User Preferences 3 - 21
Send Versions
Firmware Version
Scan the following bar code to send the firmware version to the host.
Firmware Version
Bluetooth Version
Scan the following bar code to send the Bluetooth version to the host.
Bluetooth Version
Scan Engine Version
Scan the following bar code to send the scan engine version to the host.
Scan Engine Version
72. 3 - 22 CS3000 Series Scanner Product Reference Guide
Save Configuration
Scan the following bar code after setting parameters to save the new configuration selections.
Save Configuration
73. CHAPTER 4 SYMBOLOGIES
Introduction
This chapter describes symbology features and provides the programming bar codes for selecting these
features for the scanner. Before programming, follow the instructions in Chapter 1, Getting Started.
The scanner ships with the settings in Table 4-1 on page 4-2 (also see Appendix A, Standard Default
Parameters for all scanner defaults). If the default values suit requirements, programming is not necessary. Set
a feature value by scanning a single bar code or a short bar code sequences. To return all features to default
values, scan Reset on page 3-4.
Scanning Sequence Examples
In most cases, scan only one bar code to set a parameter value. For example, to transmit bar code data
without the UPC-A check digit, scan the Do Not Transmit UPC-A Check Digit bar code under Transmit UPC-A
Check Digit on page 4-13. The scanner issues a fast warble beep and the LED turns green, indicating a
successful parameter entry.
Other parameters, such as Set Length(s) for D 2 of 5 require scanning several bar codes in sequence. See
the parameter description for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, re-scan the correct parameter.
74. 4 - 2 CS3000 Series Scanner Product Reference Guide
Symbology Default Parameters
Table 4-1 lists the defaults for all symbologies parameters. To change any option, scan the appropriate bar
code(s) in this chapter.
NOTE See Appendix A, Standard Default Parameters for all default parameters.
Table 4-1 Factory Default Table
Parameter
Parameter Number
(Hex)
Factory Default
Page
Number
UPC/EAN
UPC-A 0x01 Enable 4-5
UPC-E 0x02 Enable 4-5
UPC-E1 0x0C Disable 4-6
EAN-8 0x04 Enable 4-6
EAN-13 0x03 Enable 4-7
Bookland EAN 0x53 Disable 4-7
Decode UPC/EAN Supplementals 0x10 Ignore 4-8
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
0xF1 0x43
0xF1 0x44
4-12
Decode UPC/EAN Supplemental Redundancy 0x50 7 4-12
Transmit UPC-A Check Digit 0x28 Enable 4-13
Transmit UPC-E Check Digit 0x29 Enable 4-13
Transmit UPC-E1 Check Digit 0x2A Enable 4-14
UPC-A Preamble 0x22 System Character 4-14
UPC-E Preamble 0x23 System Character 4-15
UPC-E1 Preamble 0x24 System Character 4-16
Convert UPC-E to A 0x25 Disable 4-17
Convert UPC-E1 to A 0x26 Disable 4-17
EAN-8 Zero Extend 0x27 Disable 4-18
Bookland ISBN Format F1h 40h ISBN-10 4-19
UPC/EAN Security Level 0x4D 0 4-20
UCC Coupon Extended Code 0x55 Disable 4-21
Code 128
Code 128 0x08 Enable 4-21
75. Symbologies 4 - 3
GS1-128 (formerly UCC/EAN-128) 0x0E Enable 4-22
ISBT 128 0x54 Enable 4-22
Code 39
Code 39 0x00 Enable 4-23
Trioptic Code 39 0x0D Disable 4-23
Convert Code 39 to Code 32 0x56 Disable 4-24
Code 32 Prefix 0xE7 Disable 4-24
Set Length(s) for Code 39 0x12
0x13
2-55 4-25
Code 39 Check Digit Verification 0x30 Disable 4-26
Transmit Code 39 Check Digit 0x2B Disable 4-26
Code 39 Full ASCII Conversion 0x11 Disable 4-27
Code 93
Code 93 0x09 Disable 4-28
Set Length(s) for Code 93 0x1A
0x1B
4-55 4-28
Code 11
Code 11 0x0A Disable 4-30
Set Lengths for Code 11 0x1C
0x1D
4 to 55 4-30
Code 11 Check Digit Verification 0x34 Disable 4-32
Transmit Code 11 Check Digit(s) 0x2F Disable 4-33
Interleaved 2 of 5
Interleaved 2 of 5 0x06 Enable 4-33
Set Length(s) for I 2 of 5 0x16
0x17
14 4-34
I 2 of 5 Check Digit Verification 0x31 Disable 4-36
Transmit I 2 of 5 Check Digit 0x2C Disable 4-36
Convert I 2 of 5 to EAN 13 0x52 Disable 4-37
Table 4-1 Factory Default Table (Continued)
Parameter
Parameter Number
(Hex)
Factory Default
Page
Number
76. 4 - 4 CS3000 Series Scanner Product Reference Guide
Discrete 2 of 5
Discrete 2 of 5 0x05 Disable 4-37
Set Length(s) for D 2 of 5 0x14
0x15
12 4-38
Chinese 2 of 5
Chinese 2 of 5 0xF0 0x98 Disable 4-39
Codabar
Codabar 0x07 Disable 4-39
Set Lengths for Codabar 0x18
0x19
5-55 4-40
CLSI Editing 0x36 Disable 4-41
NOTIS Editing 0x37 Disable 4-41
MSI
MSI 0x0B Disable 4-42
Set Length(s) for MSI 0x1E
0x1F
6-55 4-43
MSI Check Digits 0x32 One 4-44
Transmit MSI Check Digit 0x2E Disable 4-44
MSI Check Digit Algorithm 0x33 Mod 10/Mod 10 4-45
GS1 DataBar
GS1 DataBar-14 0xF0
0x52
Disable 4-45
GS1 DataBar Limited 0xF0
0x53
Disable 4-46
GS1 DataBar Expanded 0xF0
0x54
Disable 4-46
Convert GS1 DataBar to UPC/EAN 0xF0
0x8D
Disable 4-47
Numeric Bar Codes 4-48
Cancel 4-50
Table 4-1 Factory Default Table (Continued)
Parameter
Parameter Number
(Hex)
Factory Default
Page
Number
77. Symbologies 4 - 5
UPC/EAN
Enable/Disable UPC-A
Parameter # 0x01
To enable or disable UPC-A, scan the appropriate bar code below.
*Enable UPC-A
(0x01)
Disable UPC-A
(0x00)
Enable/Disable UPC-E
Parameter # 0x02
To enable or disable UPC-E, scan the appropriate bar code below.
*Enable UPC-E
(0x01)
Disable UPC-E
(0x00)
78. 4 - 6 CS3000 Series Scanner Product Reference Guide
Enable/Disable UPC-E1
Parameter # 0x0C
To enable or disable UPC-E1, scan the appropriate bar code below.
Enable UPC-E1
(0x01)
*Disable UPC-E1
(0x00)
Enable/Disable EAN-8
Parameter # 0x04
To enable or disable EAN-8, scan the appropriate bar code below.
*Enable EAN-8
(0x01)
Disable EAN-8
(0x00)
NOTE UPC-E1 is not a UCC (Uniform Code Council) approved symbology.
79. Symbologies 4 - 7
Enable/Disable EAN-13
Parameter # 0x03
To enable or disable EAN-13, scan the appropriate bar code below.
*Enable EAN-13
(0x01)
Disable EAN-13
(0x00)
Enable/Disable Bookland EAN
Parameter # 0x53
To enable or disable EAN Bookland, scan the appropriate bar code below.
Enable Bookland EAN
(0x01)
*Disable Bookland EAN
(0x00)
NOTE If you enable Bookland EAN, select a Bookland ISBN Format on page 4-19. Also select either Decode
UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979 Supplemental
Mode in Decode UPC/EAN Supplementals on page 4-8.
80. 4 - 8 CS3000 Series Scanner Product Reference Guide
Decode UPC/EAN Supplementals
Parameter # 0x10
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2,
EAN 13+2). The following options are available:
• If you select Ignore UPC/EAN Supplementals, and the scanner is presented with a UPC/EAN plus
supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.
• If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with
supplemental characters, and ignores symbols without supplementals.
• If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols
with supplemental characters immediately. If the symbol does not have a supplemental, the scanner
must decode the bar code the number of times set via Decode UPC/EAN Supplemental Redundancy on
page 4-12 before transmitting its data to confirm that there is no supplemental.
• If you select one of the following Supplemental Mode options, the scanner immediately transmits
EAN-13 bar codes starting with that prefix that have supplemental characters. If the symbol does not
have a supplemental, the scanner must decode the bar code the number of times set via Decode
UPC/EAN Supplemental Redundancy on page 4-12 before transmitting its data to confirm that there is
no supplemental. The scanner transmits UPC/EAN bar codes that do not have that prefix immediately.
• Enable 378/379 Supplemental Mode.
• Enable 978/979 Supplemental Mode.
• Enable 977 Supplemental Mode.
• Enable 414/419/434/439 Supplemental Mode.
• Enable 491 Supplemental Mode.
• Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed
previously.
• Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit
user-defined prefix. Set this 3-digit prefix using User-Programmable Supplementals on page 4-12.
• Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either
of two 3-digit user-defined prefixes. Set the 3-digit prefixes using User-Programmable Supplementals
on page 4-12.
• Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any
prefix listed previously or the user-defined prefix set using User-Programmable Supplementals on
page 4-12.
• Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with
any prefix listed previously or one of the two user-defined prefixes set using User-Programmable
Supplementals on page 4-12.
NOTE If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
Enable/Disable Bookland EAN on page 4-7 to enable Bookland EAN, and select a format using Bookland
ISBN Format on page 4-19.
NOTE To minimize the risk of invalid data transmission, select either to decode or ignore supplemental
characters.
81. Symbologies 4 - 9
Decode UPC/EAN Supplementals (continued)
Select the desired option by scanning one of the following bar codes.
Decode UPC/EAN Supplementals
(0x01)
*Ignore UPC/EAN With Supplementals
(0x00)
Autodiscriminate UPC/EAN Supplementals
(0x02)
Enable 378/379 Supplemental Mode
(0x04)
Enable 978/979 Supplemental Mode
(0x05)
83. Symbologies 4 - 11
Decode UPC/EAN Supplementals (continued)
Supplemental User-Programmable Type 1
(0x09)
Supplemental User-Programmable Type 1 and 2
(0x0A)
Smart Supplemental Plus User-Programmable 1
(0x0B)
Smart Supplemental Plus User-Programmable 1 and 2
(0x0C)
84. 4 - 12 CS3000 Series Scanner Product Reference Guide
User-Programmable Supplementals
Supplemental 1: Parameter # 0xF1 0x43
Supplemental 2: Parameter # 0xF1 0x44
If you selected a Supplemental User-Programmable option from Decode UPC/EAN Supplementals on page
4-8, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the
Numeric Bar Codes on page 4-48. Select User-Programmable Supplemental 2 to set a second 3-digit prefix.
Then select the 3 digits using the Numeric Bar Codes on page 4-48.
User-Programmable Supplemental 1
User-Programmable Supplemental 2
Decode UPC/EAN Supplemental Redundancy
Parameter # 0x50
With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number of times a symbol
without supplementals are decoded before transmission. The range is from 2 to 30 times. Five or above is
recommended when decoding a mix of UPC/EAN symbols with and without supplementals, and the
autodiscriminate option is selected.
Scan the bar code below to select a decode redundancy value. Next scan two bar codes from Numeric Bar
Codes on page 4-48. Single digit numbers must have a leading zero. To change the selection or cancel an
incorrect entry, scan Cancel on page 4-50.
Decode UPC/EAN
Supplemental Redundancy
(Default: 7)
85. Symbologies 4 - 13
Transmit UPC-A Check Digit
Parameter # 0x28
Scan the appropriate bar code below to transmit the symbol with or without the UPC-A check digit.
*Transmit UPC-A Check Digit
(0x01)
Do Not Transmit UPC-A Check Digit
(0x00)
Transmit UPC-E Check Digit
Parameter # 0x29
Scan the appropriate bar code below to transmit the symbol with or without the UPC-E check digit.
*Transmit UPC-E Check Digit
(0x01)
Do Not Transmit UPC-E Check Digit
(0x00)
86. 4 - 14 CS3000 Series Scanner Product Reference Guide
Transmit UPC-E1 Check Digit
Parameter # 0x2A
Scan the appropriate bar code below to transmit the symbol with or without the UPC-E1 check digit.
*Transmit UPC-E1 Check Digit
(0x01)
Do Not Transmit UPC-E1 Check Digit
(0x00)
UPC-A Preamble
Parameter # 0x22
Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-A symbol.
Select one of the following options for transmitting UPC-A preamble to the host device: transmit system
character only, transmit system character and country code (“0” for USA), or transmit no preamble.
No Preamble
(<DATA>)
(0x00)
*System Character
(<SYSTEM CHARACTER> <DATA>)
(0x01)
System Character & Country Code
(< COUNTRY CODE> <SYSTEM CHARACTER> <DATA>)
(0x02)
87. Symbologies 4 - 15
UPC-E Preamble
Parameter # 0x23
Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E symbol.
Select one of the following options for transmitting UPC-E preamble to the host device: transmit system
character only, transmit system character and country code (“0” for USA), or transmit no preamble.
No Preamble
(<DATA>)
(0x00)
*System Character
(<SYSTEM CHARACTER> <DATA>)
(0x01)
System Character & Country Code
(< COUNTRY CODE> <SYSTEM CHARACTER> <DATA>)
(0x02)
88. 4 - 16 CS3000 Series Scanner Product Reference Guide
UPC-E1 Preamble
Parameter # 0x24
Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E1 symbol.
Select one of the following options for transmitting UPC-E1 preamble to the host device: transmit system
character only, transmit system character and country code (“0” for USA), or transmit no preamble.
No Preamble
(<DATA>)
(0x00)
*System Character
(<SYSTEM CHARACTER> <DATA>)
(0x01)
System Character & Country Code
(< COUNTRY CODE> <SYSTEM CHARACTER> <DATA>)
(0x02)
89. Symbologies 4 - 17
Convert UPC-E to UPC-A
Parameter # 0x25
Enable this parameter to convert UPC-E (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections
(e.g., Preamble, Check Digit).
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E (zero suppressed) decoded data.
Convert UPC-E to UPC-A (Enable)
(0x01)
*Do Not Convert UPC-E to UPC-A (Disable)
(0x00)
Convert UPC-E1 to UPC-A
Parameter # 0x26
Enable this parameter to convert UPC-E1 (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections
(e.g., Preamble, Check Digit).
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E1 (zero suppressed) decoded data.
Convert UPC-E1 to UPC-A (Enable)
(0x01)
*Do Not Convert UPC-E1 to UPC-A (Disable)
(0x00)
90. 4 - 18 CS3000 Series Scanner Product Reference Guide
EAN Zero Extend
Parameter # 0x27
When enabled, this parameter adds five leading zeros to decoded EAN-8 symbols to make them compatible in
format to EAN-13 symbols.
Disable this parameter to transmit EAN-8 symbols as is.
Enable EAN Zero Extend
(0x01)
*Disable EAN Zero Extend
(0x00)
91. Symbologies 4 - 19
Bookland ISBN Format
Parameter # 0xF1 0x40
If you enabled Bookland EAN using Enable/Disable Bookland EAN on page 4-7, select one of the following
formats for Bookland data:
• Bookland ISBN-10 - The scanner reports Bookland data starting with 978 in traditional 10-digit format
with the special Bookland check digit for backward-compatibility. Data starting with 979 is not considered
Bookland in this mode.
• Bookland ISBN-13 - The scanner reports Bookland data (starting with either 978 or 979) as EAN-13 in
13-digit format to meet the 2007 ISBN-13 protocol.
*Bookland ISBN-10
(0x00)
Bookland ISBN-13
(0x01)
NOTE For Bookland EAN to function properly, first enable Bookland EAN using Enable/Disable Bookland EAN
on page 4-7, then select either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN
Supplementals, or Enable 978/979 Supplemental Mode in Decode UPC/EAN Supplementals on page 4-8.
92. 4 - 20 CS3000 Series Scanner Product Reference Guide
UPC/EAN Security Level
Parameter # 0x4D
The CS3070 offers four levels of decode security for UPC/EAN bar codes. Increasing levels of security are
provided for decreasing levels of bar code quality. Select higher levels of security for decreasing levels of bar
code quality. Increasing security decreases the scanner’s aggressiveness, so choose only that level of security
necessary for the application.
UPC/EAN Security Level 0
This default setting allows the scanner to operate in its most aggressive state, while providing sufficient
security in decoding most “in-spec” UPC/EAN bar codes.
*UPC/EAN Security Level 0
(0x00)
UPC/EAN Security Level 1
As bar code quality levels diminish, certain characters become prone to mis-decodes before others (i.e., 1, 2,
7, 8). If mis-decodes of poorly printed bar codes occur, and the mis-decodes are limited to these characters,
select this security level.
UPC/EAN Security Level 1
(0x01)
UPC/EAN Security Level 2
If mis-decodes of poorly printed bar codes occur, and the mis-decodes are not limited to characters 1, 2, 7, and
8, select this security level.
UPC/EAN Security Level 2
(0x02)
UPC/EAN Security Level 3
If misdecodes still occur after selecting Security Level 2, select this security level. Be advised, selecting this
option is an extreme measure against mis-decoding severely out of spec bar codes. Selection of this level of
security significantly impairs the decoding ability of the scanner. If this level of security is necessary, try to
improve the quality of the bar codes.
UPC/EAN Security Level 3
(0x03)
93. Symbologies 4 - 21
UCC Coupon Extended Code
Parameter # 0x55
The UCC Coupon Extended Code is an additional bar code adjacent to a UCC Coupon Code. To enable or
disable UCC Coupon Extended Code, scan the appropriate bar code below.
Enable UCC Coupon Extended Code
(0x01)
*Disable UCC Coupon Extended Code
(0x00)
Code 128
Enable/Disable Code 128
Parameter # 0x08
To enable or disable Code 128, scan the appropriate bar code below.
*Enable Code 128
(0x01)
Disable Code 128
(0x00)
94. 4 - 22 CS3000 Series Scanner Product Reference Guide
Enable/Disable GS1-128 (formerly UCC/EAN-128)
Parameter # 0x0E
To enable or disable GS1-128, scan the appropriate bar code below. See Appendix B, Programming
Reference for details on GS1-128 (formerly UCC/EAN-128).
*Enable GS1-128
(0x01)
Disable GS1-128
(0x00)
Enable/Disable ISBT 128
Parameter # 0x54
To enable or disable ISBT 128, scan the appropriate bar code below.
*Enable ISBT 128
(0x01)
Disable ISBT 128
(0x00)
Lengths for Code 128
No length setting is required for Code 128.
95. Symbologies 4 - 23
Code 39
Enable/Disable Code 39
Parameter # 0x00
To enable or disable Code 39, scan the appropriate bar code below.
*Enable Code 39
(0x01)
Disable Code 39
(0x00)
Enable/Disable Trioptic Code 39
Parameter # 0x0D
Trioptic Code 39 is a variant of Code 39 used in marking computer tape cartridges. Trioptic Code 39 symbols
always contain six characters.
To enable or disable Trioptic Code 39, scan the appropriate bar code below.
Enable Trioptic Code 39
(0x01)
*Disable Trioptic Code 39
(0x00)
NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If an error beep sounds
when enabling Trioptic Code 39, disable Code 39 Full ASCII and try again.
96. 4 - 24 CS3000 Series Scanner Product Reference Guide
Convert Code 39 to Code 32 (Italian Pharma Code)
Parameter # 0x56
Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code
below to enable or disable converting Code 39 to Code 32.
Enable Convert Code 39 to Code 32
(0x01)
*Disable Convert Code 39 to Code 32
(0x00)
Code 32 Prefix
Parameter # 0xE7
Enable this parameter to add the prefix character A to all Code 32 bar codes. Enable Convert Code 39 to Code
32 (Italian Pharma Code) in order for this parameter to function.
Enable Code 32 Prefix
(0x01)
*Disable Code 32 Prefix
(0x00)
NOTE Code 39 must be enabled in order for this parameter to function.
97. Symbologies 4 - 25
Set Lengths for Code 39
Parameter # L1 = 0x12, L2 = 0x13
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 39 to any length, one or two discrete lengths, or lengths within
a specific range. If you enabled Code 39 Full ASCII, Length Within a Range or Any Length are the preferred
options.
One Discrete Length - This option limits decodes to Code 39 symbols containing a selected length. Select
lengths using the Numeric Bar Codes on page 4-48. For example, to decode only Code 39 symbols with 14
characters, scan Code 39 - One Discrete Length, then scan 1, then 4. To change the selection or cancel an
incorrect entry, scan the Cancel on page 4-50.
Code 39 - One Discrete Length
Two Discrete Lengths - This option limits decodes to Code 39 symbols containing either of two selected
lengths. Select lengths using the Numeric Bar Codes on page 4-48. For example, to decode only Code 39
symbols containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, then scan 0, 2, 1,
and then 4. To change the selection or cancel an incorrect entry, scan Cancel on page 4-50.
Code 39 - Two Discrete Lengths
Length Within Range - This option limits decodes to Code 39 symbols within a specified range. For
example, to decode Code 39 symbols containing between 4 and 12 characters, first scan Code 39 - Length
Within Range. Then scan 0, 4, 1, and 2. Select lengths using the Numeric Bar Codes on page 4-48. To
change the selection or cancel an incorrect entry, scan Cancel on page 4-50.
Code 39 - Length Within Range
Any Length - Scan this option to decode Code 39 symbols containing any number of characters.
Code 39 - Any Length
NOTE When setting lengths, include a leading zero for single digit numbers.
98. 4 - 26 CS3000 Series Scanner Product Reference Guide
Code 39 Check Digit Verification
Parameter # 0x30
Enable this feature to check the integrity of all Code 39 symbols to verify that the data complies with a specified
check digit algorithm. Only Code 39 symbols that include a modulo 43 check digit are decoded, so only enable
this if your Code 39 symbols contain a module 43 check digit.
Verify Code 39 Check Digit
(0x01)
*Do Not Verify Code 39 Check Digit
(0x00)
Transmit Code 39 Check Digit
Parameter # 0x2B
Scan this bar code to transmit the check digit with the data.
Transmit Code 39 Check Digit (Enable)
(0x01)
Scan this bar code to transmit data without the check digit.
*Do Not Transmit Code 39 Check Digit (Disable)
(0x00)
99. Symbologies 4 - 27
Enable/Disable Code 39 Full ASCII
Parameter # 0x11
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To
enable or disable Code 39 Full ASCII, scan the appropriate bar code below.
See Table B-6 on page B-7 for mapping Code 39 characters to ASCII values.
Enable Code 39 Full ASCII
(0x00)
*Disable Code 39 Full ASCII
(0x00)
NOTE You cannot enable Trioptic Code 39 and Code 39 Full ASCII simultaneously. If the scanner issues an
error beep when enabling Code 39 Full ASCII, disable Trioptic Code 39 and try again.
100. 4 - 28 CS3000 Series Scanner Product Reference Guide
Code 93
Enable/Disable Code 93
Parameter # 0x09
To enable or disable Code 93, scan the appropriate bar code below.
Enable Code 93
(0x01)
*Disable Code 93
(0x00)
Set Lengths for Code 93
Parameter # L1 = 0x1A, L2 = 0x1B
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 93 to any length, one or two discrete lengths, or lengths within
a specific range.
One Discrete Length - Select this option to decode only codes containing a selected length. For example,
select Code 93 One Discrete Length, then scan the bar codes 1, 4 from Numeric Bar Codes on page 4-48 to
limit the decoding to Code 93 symbols containing 14 characters. To change the selection or cancel an incorrect
entry, scan Cancel on page 4-50.
Code 93 - One Discrete Length
101. Symbologies 4 - 29
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. For
example, select Code 93 Two Discrete Lengths, then scan 0, 2, 1, 4 from Numeric Bar Codes on page
4-48 to limit the decoding to Code 93 symbols containing 2 or 14 characters. To change the selection or
cancel an incorrect entry, scan Cancel on page 4-50.
Code 93 - Two Discrete Lengths
Length Within Range - Select this option to decode a code type within a specified range. For example, to
decode Code 93 symbols containing between 4 and 12 characters, first scan Code 93 Length Within
Range, then scan 0, 4, 1 and 2 (include a leading zero for single digit numbers) from Numeric Bar Codes on
page 4-48. To change the selection or cancel an incorrect entry, scan Cancel on page 4-50.
Code 93 - Length Within Range
Any Length - Scan this option to decode Code 93 symbols containing any number of characters.
Code 93 - Any Length
102. 4 - 30 CS3000 Series Scanner Product Reference Guide
Code 11
Enable/Disable Code 11
Parameter # 0x0A
To enable or disable Code 11, scan the appropriate bar code below.
Enable Code 11
(0x01)
*Disable Code 11
(0x00)
Set Lengths for Code 11
Parameter # L1 = 0x1C, L2 = 0x1D
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within
a specific range.
• One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length.
Select the length using the bar codes from Numeric Bar Codes on page 4-48. For example, to decode
only Code 11 symbols with 14 characters, scan Code 11 - One Discrete Length, then scan 1, then 4. To
correct an error or to change the selection, scan Cancel on page 4-50.
• Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two
selected lengths. Select lengths using the bar codes from Numeric Bar Codes on page 4-48. For
example, to decode only Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two
Discrete Lengths, then scan 0, 2, 1, and 4. To correct an error or to change the selection, scan
Cancel on page 4-50.
• Length Within Range - Select this option to decode a Code 11 symbol with a specific length
range. Select lengths using the bar codes from Numeric Bar Codes on page 4-48. For example, to
decode Code 11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within
Range. Then scan 0, 4, 1, and 2 (include a leading zero for single digit numbers). To correct an error or
change the selection, scan Cancel on page 4-50.
• Any Length - Scan this option to decode Code 11 symbols containing any number of characters within
the scanner’s capability.
103. Symbologies 4 - 31
Set Lengths for Code 11 (continued)
Code 11 - One Discrete Length
Code 11 - Two Discrete Lengths
Code 11 - Length Within Range
Code 11 - Any Length
104. 4 - 32 CS3000 Series Scanner Product Reference Guide
Code 11 Check Digit Verification
Parameter # 0x34
This feature allows the scanner to check the integrity of all Code 11 symbols to verify that the data complies
with the specified check digit algorithm. This selects the check digit mechanism for the decoded Code 11 bar
code. The options are to check for one check digit, check for two check digits, or disable the feature.
To enable this feature, scan the bar code below corresponding to the number of check digits encoded in your
Code 11 symbols.
*Disable
(0x00)
One Check Digit
(0x01)
Two Check Digits
(0x02)
105. Symbologies 4 - 33
Transmit Code 11 Check Digits
Parameter # 0x2F
This feature selects whether or not to transmit the Code 11 check digit(s).
Transmit Code 11 Check Digit(s) (Enable)
(0x01)
*Do Not Transmit Code 11 Check Digit(s) (Disable)
(0x00)
Interleaved 2 of 5
Enable/Disable Interleaved 2 of 5
Parameter # 0x06
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below.
*Enable Interleaved 2 of 5
(0x01)
Disable Interleaved 2 of 5
(0x00)
NOTE Code 11 Check Digit Verification must be enabled for this parameter to function.