The Ronan X11CB Event Recording Annunciator is designed for the process and power industries, offering the most advanced data acquisition technology and monitoring, along with Ronan's high quality and performance standards. The X11CB annunciator system is equipped with an integrated Interface Module that allows for an Ethernet connection to the Software Configuration and other applications. The system also supports industrial protocols which allow for communication with a host on a local or plant network. The Interface Module continuously monitors system functions and Alarm Modules via a rugged CAN bus interface signaled by dedicated LED or relay contact closure. The X11CB Annunciator system features one to four windows per module, allowing for a maximum monitoring capacity of 400 alarm points. *Alarm Capacity: 100 alarm modules with up to four alarm points each on a single interface module *Remote monitoring through Ethernet interface *Event time stamping to 1mS resolution with date and time of day correlation when an external IRIG-B source is provided *Event recording capability with local IM storage up to 1000 events *Software configurable *Event history can be downloaded to open-source SQL database *Compatible with Ronan's X1000 SER and X110 Remote Alarm Annunciator *Network protocols: TCP/IP - UDP Ronan Proprietary, MODBUS over TCP, DNP3 (with optional X200 REC-UCM-2) The MODBUS over TCP protocol allows users of PLCs and DCSs that are operating as MODBUS Masters to acquire the status of annunciator inputs or transmit alarms to the annunciator for process monitoring. For more information on the RONAN X11CB in Northern California, contact: Belilove Company Engineers 21060 Corsair Blvd Hayward, CA 94545 Phone: (510) 274-1990 Fax: (510) 274-1999 E-mail: sales@belilove.com

1. Can be programmed in the field using
Ronan’s Configuration Software Application
Local Monitoring Applications
EVENT RECORDING ANNUNCIATOR
X11CB
28209 Avenue Stanford, Valencia, CA 91355 U.S.A. • 800-327-6626 • sales@ronan.com • www.ronan.com
DISPLAY PRODUCTS DIVISION
Remote Monitoring with
Network Transfer Applications
Multiplexing | Alarm Annunciation | Networking | Event Recording

2. Chassis:
• Up to 100 I/O Modules*
• Power Supply Filter Module
• AUX Relay Modules
• Interface and Communication Module
System Size:
• Basic Cabinet Module is 3.50 in.
(88.90mm) x 3.50 in. (88.90mm)
Enclosures:
• Weather Proof
- NEMA 4 (optional)
- NEMA 4X (optional)
- NEMA 12 (optional)
• Panel Mount
• Surface-mount
•19”Rack-mount
*Multiple chassis can be connected through CAN bus to
share communications capabilities up to a maximum of
FEATURES
Alarm Display LEDs:
• Minimum of 4 LEDs per window
• Colors: red, green, yellow, white
and blue
Built-In Diagnostics:
• Hardware startup
• System failure/status
PUSHBUTTON INPUTS
• Front Bezel Pushbuttons
• Rear Input Terminals
• via Network Interface
- Silence
- Acknowledge
- Reset
- First-Out Reset
- LED Test
• 24 VDC via optional Power Supply
INTERFACE MODULE
Communications with the SER/HMI or
a Host via a 10/100 Base-T Interface via:
• Ronan Proprietary Protocol
• ModBus/TCP Protocol
• DNP 3.0 Protocol via Ronan’s
X200 REC-UCM-2 (Optional)
•Alarm module monitoring generates
system error with missing module.
•
FullyconfigurableviaTCP/IPovera
network(LAN)usingtheRonan
ConfigurationSoftware
ALARM MODULE
(4) Opto-Isolated Channels
per module featuring:
ENVIRONMENT
• Operating Temperature
- 0 to 60º C (32 to 140ºF)**
• Storage Temperature
- 40 to +85ºC (-40 to +185ºF)
• Humidity 5-95% RH, non-condensing
** Operating at temperatures over 50ºC for more than a few
hours at a time will shorten the life of the system. The average
temperature over life of the system should be <50ºC, but
never exceeding 60ºC
WARRANTY
Ronan warrants equipment of its own
manufacture to be free from defects in
workmanship and material under normal
conditions of use and service, and will replace
any component found to be defective, on its
return, transportation charges prepaid, within
three (3) years of its original purchase. This
Extended Warranties are available.
Consult Factory.
DISPLAY PRODUCTS DIVISION
TECHNICAL SPECIFICATIONS
SYSTEM CONFIGURATION
(software provided)
Event Time Stamping to 1mS
resolution with date and time of
day correlation when an external
time source is provided
Stores latest 100,000 events in
distributed, non-volatile memory
ISO 9001:2008 Certified
SYSTEM VOLTAGE
• 1500V Isolation to Ground and
Channel-to-Channel
• Wetted or Dry Contacts
(Selectable by Module)
• Normally Open/Normally Closed
Contact Sensing
•
-
- Units in milliseconds, seconds, and minutes
28209 Avenue Stanford, Valencia, CA 91355 U.S.A. • 800-327-6626 • sales@ronan.com • www.ronan.com
• IRIG-B
• NTP Server
warranty carries no liability, either expressed
or implied, beyond our obligations to replace
the unit which carries the warranty.
Compatible with Ronan’s X1000
SER/HMI and X110 Remote
Alarm Annunciators
100 Modules.
of Interface Module.
AllISAalarmsequencesavailable
andfieldconfigurable
• Alarm history download capability
to open source SQL database
Continuous alarm module configuration
monitoring. (Verifies each alarm module
for correct configuration and reconfigures
improperly configured modules).
Can interface to PLC/DCS
systems using Ronan’s X200
Universal Communication Module
Filters for each field contacts normal
and alarm transition
-
Integrating/non-integrating filter types
Field Contact Debounce Filter with:
- VDC: 24, 48 or 125
- VAC: 115