Ampair 10kW - technical specifications
•
0 likes•563 views
The Ampair 10 kW wind turbine is a small wind turbine that is MCS certified and eligible for feed-in tariffs. It has a simple, robust design that can generate power continuously from wind speeds above 3 m/s. It has multiple tower and mounting options and can be used for grid connection, battery charging, or direct heating. Key specifications include a 6.4 m rotor diameter, 11.48 kW maximum power output, and certification to stringent IEC wind conditions standards.
Report
Share
Report
Share
Download to read offline
Recommended
Ampair 6kW - technical specifications
The Ampair 6 kW wind turbine is a small wind turbine that is MCS certified, eligible for feed-in tariffs, and generates power continuously from wind speeds above 3 m/s. It has a simple, robust design tested to withstand the strongest wind conditions, and is suitable for coastal locations. Tower options include tilting monopoles and guyed towers from 15-30m, and it can be used for grid connection, battery charging, or direct heating.
Ampair 20kW - technical specifications
The Ampair 20 kW wind turbine is a simple, robust turbine suitable for coastal locations. It has a 10.4 meter rotor diameter and can generate power continuously from wind speeds above 3 m/s. Tower options include tilting monopoles from 15-18 meters and guyed tubular towers from 18-30 meters. The turbine is tested to withstand the strongest IEC class 1 wind conditions and has a 5 year warranty.
Ampair 3kW - technical specifications
The Ampair 3 kW wind turbine is a simple, robust design suitable for coastal locations that can generate power continuously from wind speeds of 3 m/s. It comes in multiple tower options and models for grid connection, battery charging, or direct heating. Key specifications include a 3.6 m rotor diameter, 210 kg weight, passive furling and current limiting control, and power outputs of 2 kW at 11 m/s and 3.25 kW at 15.5 m/s.
Applied motion products ps150 a24 datasheet
This document provides specifications for a 150W/24V power supply with built-in active power factor correction. It lists the supply's key electrical specifications including a nominal output of 24V at 6.3A, input voltage range of 85-265VAC, efficiency between 81-84%, and protections for overcurrent, overvoltage, and short circuits. The document also provides the supply's mechanical dimensions, operating temperature range, safety and EMI certifications, and other general product information.
Cascade TEK - SVO-9 Vacuum Oven
Largest Turn Key Vacuum Drying Oven Available
The SVO-9 is a large vacuum drying oven integrated with the vacuum pump (wet or oil-free dry pump) necessary to execute your drying, curing, bake-out process. Delivered with the controller programmed and the pumps installed, the SVO-9 can be operational within hours of receiving it.
www.cascadetek.com
Aet series
The document describes the AET series UPS from Nova Electric, which are true online UPS systems available in 1KVA to 3.2KVA capacities. The UPS have a rotatable LCD, are 19-inch rack mountable, include hot-swappable battery packs, and feature user-friendly software. Key specifications include output power ratings, input/output voltage ranges, battery details, communications options, and certifications.
Save Box All In One Energy Storage Solution
Savebox HOME is an energy storage and power management device consisting of a LiFePO4 battery pack, control electronics, DC/AC inverter/charger, and PV charger. It is intended for domestic use and has a single phase AC output of 230V, 32A input/output protection, and can switch between grid and off-grid power in less than 15ms. Key specifications include a 150V/70A MPPT PV charger, >4000 cycle battery life, Ethernet and NFC connectivity, and air cooling with automatic airflow regulation. Models include options for inverter power between 2-6.5kVA, battery capacity between 4.3-7.2kWh, and recommended PV array
HMR Philippines - Power Generation Unit
HMR Philippines - Machinery and power generation unit is proud to represent a wide range of brand new power generator sets from 1.5KW to 1200KW from different manufacturers such as Cummins and Isuzu.
We provide 1 Year Warranty directly from the manufacturer with full technical service and support.
We provide the installation work and material directly from the manufacturer.
Spare parts available at anytime directly from the manufacturer.
Recommended
Ampair 6kW - technical specifications
The Ampair 6 kW wind turbine is a small wind turbine that is MCS certified, eligible for feed-in tariffs, and generates power continuously from wind speeds above 3 m/s. It has a simple, robust design tested to withstand the strongest wind conditions, and is suitable for coastal locations. Tower options include tilting monopoles and guyed towers from 15-30m, and it can be used for grid connection, battery charging, or direct heating.
Ampair 20kW - technical specifications
The Ampair 20 kW wind turbine is a simple, robust turbine suitable for coastal locations. It has a 10.4 meter rotor diameter and can generate power continuously from wind speeds above 3 m/s. Tower options include tilting monopoles from 15-18 meters and guyed tubular towers from 18-30 meters. The turbine is tested to withstand the strongest IEC class 1 wind conditions and has a 5 year warranty.
Ampair 3kW - technical specifications
The Ampair 3 kW wind turbine is a simple, robust design suitable for coastal locations that can generate power continuously from wind speeds of 3 m/s. It comes in multiple tower options and models for grid connection, battery charging, or direct heating. Key specifications include a 3.6 m rotor diameter, 210 kg weight, passive furling and current limiting control, and power outputs of 2 kW at 11 m/s and 3.25 kW at 15.5 m/s.
Applied motion products ps150 a24 datasheet
This document provides specifications for a 150W/24V power supply with built-in active power factor correction. It lists the supply's key electrical specifications including a nominal output of 24V at 6.3A, input voltage range of 85-265VAC, efficiency between 81-84%, and protections for overcurrent, overvoltage, and short circuits. The document also provides the supply's mechanical dimensions, operating temperature range, safety and EMI certifications, and other general product information.
Cascade TEK - SVO-9 Vacuum Oven
Largest Turn Key Vacuum Drying Oven Available
The SVO-9 is a large vacuum drying oven integrated with the vacuum pump (wet or oil-free dry pump) necessary to execute your drying, curing, bake-out process. Delivered with the controller programmed and the pumps installed, the SVO-9 can be operational within hours of receiving it.
www.cascadetek.com
Aet series
The document describes the AET series UPS from Nova Electric, which are true online UPS systems available in 1KVA to 3.2KVA capacities. The UPS have a rotatable LCD, are 19-inch rack mountable, include hot-swappable battery packs, and feature user-friendly software. Key specifications include output power ratings, input/output voltage ranges, battery details, communications options, and certifications.
Save Box All In One Energy Storage Solution
Savebox HOME is an energy storage and power management device consisting of a LiFePO4 battery pack, control electronics, DC/AC inverter/charger, and PV charger. It is intended for domestic use and has a single phase AC output of 230V, 32A input/output protection, and can switch between grid and off-grid power in less than 15ms. Key specifications include a 150V/70A MPPT PV charger, >4000 cycle battery life, Ethernet and NFC connectivity, and air cooling with automatic airflow regulation. Models include options for inverter power between 2-6.5kVA, battery capacity between 4.3-7.2kWh, and recommended PV array
HMR Philippines - Power Generation Unit
HMR Philippines - Machinery and power generation unit is proud to represent a wide range of brand new power generator sets from 1.5KW to 1200KW from different manufacturers such as Cummins and Isuzu.
We provide 1 Year Warranty directly from the manufacturer with full technical service and support.
We provide the installation work and material directly from the manufacturer.
Spare parts available at anytime directly from the manufacturer.
Ct & pt specification
This document outlines the minimum acceptable specifications for current transformers, potential transformers, and capacitor voltage transformers used for metering purposes at different voltage levels.
The specifications include parameters such as highest system voltage, transformer ratios, number of cores/windings, rated thermal and short circuit currents, accuracy classes, voltage and burden ratings that the transformers must conform to for different voltage levels ranging from 11kV to 245kV.
The document also specifies the applicable Indian Standards that the transformers and their insulating oils must conform to for metering applications.
Liebert ita-10 kva, Emerson Bangladesh, Online UPS Bangladesh
Liebert ita-10 kva, Emerson Bangladesh, Online UPS Bangladesh, 10KVA Online UPS Bangladesh, UPS Price Bangladesh, Emerson Price, Vertv Bangladesh, Vertiv Emerson Bangladesh
TRIMATRIK MULTIMEDIA
Hotline: 0185-3330355, 01785-777722
Telephone: 02-48955951, 09611677432
E-mail: info@trimatrikbd.com
Web: http://www.trimatrikbd.com
Facebook: http://www.facebook.com/trimatrikbd
Google+: https://plus.google.com/u/1/+TRIMATRIK-MULTIMEDIA
Twitter: https://twitter.com/trimatrikbd
Linkedin: https://www.linkedin.com/company/trimatrik
Pinterest: https://www.pinterest.com/trimatrik/
Youtube: https://www.youtube.com/channel/UCsGIujrlNAqkF7ZY-KzqkJA
https://digg.com/u/trimatrikbd
https://www.dailymotion.com/trimatrikbd
Product: UPS: UniStar V
This document provides specifications for the UniStar V line of UPS systems, including models ranging from 1-3kVA for 120V or 230V single phase systems. It describes the tower/rack mounting design, modular battery packs for extended runtime, and optional accessories like external bypass switches or SNMP cards. Product details are provided for each UPS model and battery configuration including dimensions, weights, input/output connections and battery runtimes.
Productos en Stock
The document lists various solar products in stock including amorphous and polycrystalline solar panels ranging from 80W to 190W, PWM charge controllers from Morningstar, Wagan, and Xantrex ranging from 170W to 1920W, Wagan and Xantrex solar inverters from 400W to 3000W, Mtek and Alphacell lead-acid batteries from 75Ah to 155Ah, solar fencing from Parmak ranging from 6km to 20km, and Sun Pumps solar water pumps with capacities from 35m to 76m.
triac constant voltage dimmable driver EUP75T-1H12V-0
Shanghai Euchips 40-240VAC 12W 12VDC triac constant voltage dimmable driver EUP75T-1H12V-0. Welcome to contact us: sales@euchips.com
1,5 ke6v8
This document provides specifications for Transil diodes that provide high overvoltage protection through clamping action. The diodes have peak pulse power ratings from 1500W up to 440V and fast response times. Electrical characteristics including leakage current, breakdown voltage, clamping voltage, and forward voltage drop are provided for various diode models in tables and graphs. Thermal characteristics and packaging information is also included.
Tempest EMI Filters
Premier’s Tempest EMI Power Line Filters provide off the shelf performance for both moderate and severe environments.
Visit site for more information about Tempest EMI Filters.
McWong_Sensors_&_Controls_Catalog_2015
This document contains wiring diagrams and instructions for connecting various occupancy sensor models to power sources and lighting loads. It also includes specifications for the sensor models, such as voltage input, load capacity, mounting details, and certifications. The sensor models can be ceiling mounted or installed in wall switches, and use PIR, ultrasonic, or dual technology detection methods to automatically control lighting based on occupancy or vacancy.
Original N-Channel Mosfet CEP83A3 30V 100A TO-220 New CET
This document summarizes the specifications of an N-channel enhancement mode field effect transistor (FET) in a TO-220 or TO-263 package. It has a drain-source breakdown voltage up to 30V, continuous drain current up to 100A, and on-resistance as low as 5.3mΩ at a gate-source voltage of 10V. The document provides detailed maximum ratings, electrical characteristics, and test conditions. Graphs depict characteristics such as output, transfer and capacitance curves, and switching waveforms are shown.
Terbella power plant
The document discusses the Tarbela Power Station in Pakistan. It contains 14 questions and answers about the power station. Some key details:
- There are 14 units at the Tarbela Power Station that can generate a total of 3478MW of electricity. Units 1-10 are 175MW each, while units 11-14 are 432MW each.
- The station uses "Frances turbines". The diameter of the penstock is 24.5 inches and the Main Inlet Valve is 48.5 inches.
- The penstock pressure is 150 bar. The pressure of the cooling water system is 10 bar. The lubrication oil system has a maximum pressure of 400 Psi.
-
Tecnotion tl series_specsheet
This document provides specifications for Tecnotion BV's TL series iron core motors in versions 6, 9, 12, 15, 18, and 24. It lists performance details such as maximum force, speed, electrical properties including current and resistance, and mechanical dimensions. The motors feature integrated water cooling and can be mounted on magnet plates of different sizes with mounting instructions provided.
Kripa Inverter UPS
The document describes Kripa Inverters and UPS products, including their features and specifications. Kripa offers inverters and UPS from 600VA to 5000VA capacity. Their products provide pure sine wave output and have user-friendly LED/LCD displays. The inverters and UPS can run appliances like lights, fans, TVs, ACs and protect equipment from power fluctuations, offering backup times based on capacity. Kripa provides 7 years warranty and services customers in Kerala, India.
Tbxlha 6565 c-vtm
The TBXLHA-6565C-VTM is a tri-band dual-polarization antenna with three independent antennas under one radome covering the frequency bands of 824-960 MHz, 1710-1880 MHz, and 1850-2180 MHz. It has a 65 degree horizontal beamwidth and can provide up to 8 degrees of electrical tilt control compatible with Andrew's Teletilt remote control system. Key specifications include gains between 14.5-17.5 dBi across the bands, front-to-back ratios over 25 dB, and maximum wind loading of 922 N at 150 km/h.
Original N-channel MOSFET MMF70R900P 70R900P 70R900 750V 5A TO-220 New MagnaC...
Original N-channel MOSFET MMF70R900P 70R900P 70R900 750V 5A TO-220 New MagnaChip Semiconductor
https://authelectronic.com/original-n-channel-mosfet-mmf70r900p-70r900p-70r900-750v-5a-to-220-new-magnachip-semiconductor
POWERVAMP LTD. > GPU 2000
The GPU 2000 is a 2000 amp battery pack used to start larger turbine engines. It has a 38 amp/hr capacity from two 13V batteries in series and can operate from -40C to +40C. Weighing 70 lbs, it is used widely by the British military and offshore operators to start Lynx helicopters, ALF 502 turboprops, and BAe 146 aircraft. The GPU 2000 has a rugged stainless steel case and high-quality components designed for reliability in harsh environments.
HVA200 200 kV VLF/DC tester from B2 ELECTRONIC
The high power HVA200 VLF/DC tester is capable of testing cables up to 138 kV with a test voltage of 1,7 x Uo and allows diagnostics with Partial Discharge and Tan Delta. It is the smallest and lightest high voltage hipot tester offering Very Low Frequency testing at 0.1 Hz as well as DC output up to 200 kV.
Quadri elettrici per vaporizzatori - Control box for lpg vaporizers
The document discusses standard control boxes for vaporizing liquid gases, listing models that range in capacity from 30 to 1000 kg/h. It notes the control boxes come in an IP65 version with a steel enclosure for installation in safe areas, and optionally an Eexd version. Standard models are listed along with their vaporizing capacity, power requirement, and operating voltage.
generator basic specifications medisky llc dubai
Medisky produces generating sets from 10-2000 KVA that run on diesel or gas for emergency power or parallel operation with mains power. They are available in normal, automatic, or soundproofed versions mounted on a foundation, encased, in a container, or truck-mounted. Generating sets include alternators from manufacturers like Stanford, Marelli, and Meccalte. Control and monitoring panels can be manual, automatic, or for parallel systems.
Ls catalog thiet bi dien mv drive e_110628_dienhathe.vn
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
10kW Solar Canopy
A 14kW solar canopy was installed at an industrial site to provide renewable energy and power electric vehicle charging stations. The solar canopy generates electricity year-round to charge EVs and reduce the site's carbon footprint through clean energy generation.
Solar System proposal
This document proposes a solar power system for the PIPS project and provides technical details. It recommends a 45kW solar panel system with polycrystalline solar modules, an MPPT charge controller, deep cycle maintenance-free batteries, and a 60kVA inverter. Installation details are included along with cost estimates totaling approximately 37 million Pakistani rupees. Technical specifications conform to international standards.
10 MW Solar PV power Plant - CPM & PERT, Design
This document discusses the design of a 10 MW solar PV power plant consisting of 20 sections of 500 kW each. It includes details of the number of solar panels, inverters, junction boxes, and other infrastructure needed. A critical path method (CPM) network diagram shows the key activities in the project, including site assessment, design, procurement, mounting structure erection, panel erection, cabling, commissioning, and their durations and dependencies. The critical path is shown to be either 14 or 18 weeks depending on the pathway taken.
More Related Content
What's hot
Ct & pt specification
This document outlines the minimum acceptable specifications for current transformers, potential transformers, and capacitor voltage transformers used for metering purposes at different voltage levels.
The specifications include parameters such as highest system voltage, transformer ratios, number of cores/windings, rated thermal and short circuit currents, accuracy classes, voltage and burden ratings that the transformers must conform to for different voltage levels ranging from 11kV to 245kV.
The document also specifies the applicable Indian Standards that the transformers and their insulating oils must conform to for metering applications.
Liebert ita-10 kva, Emerson Bangladesh, Online UPS Bangladesh
Liebert ita-10 kva, Emerson Bangladesh, Online UPS Bangladesh, 10KVA Online UPS Bangladesh, UPS Price Bangladesh, Emerson Price, Vertv Bangladesh, Vertiv Emerson Bangladesh
TRIMATRIK MULTIMEDIA
Hotline: 0185-3330355, 01785-777722
Telephone: 02-48955951, 09611677432
E-mail: info@trimatrikbd.com
Web: http://www.trimatrikbd.com
Facebook: http://www.facebook.com/trimatrikbd
Google+: https://plus.google.com/u/1/+TRIMATRIK-MULTIMEDIA
Twitter: https://twitter.com/trimatrikbd
Linkedin: https://www.linkedin.com/company/trimatrik
Pinterest: https://www.pinterest.com/trimatrik/
Youtube: https://www.youtube.com/channel/UCsGIujrlNAqkF7ZY-KzqkJA
https://digg.com/u/trimatrikbd
https://www.dailymotion.com/trimatrikbd
Product: UPS: UniStar V
This document provides specifications for the UniStar V line of UPS systems, including models ranging from 1-3kVA for 120V or 230V single phase systems. It describes the tower/rack mounting design, modular battery packs for extended runtime, and optional accessories like external bypass switches or SNMP cards. Product details are provided for each UPS model and battery configuration including dimensions, weights, input/output connections and battery runtimes.
Productos en Stock
The document lists various solar products in stock including amorphous and polycrystalline solar panels ranging from 80W to 190W, PWM charge controllers from Morningstar, Wagan, and Xantrex ranging from 170W to 1920W, Wagan and Xantrex solar inverters from 400W to 3000W, Mtek and Alphacell lead-acid batteries from 75Ah to 155Ah, solar fencing from Parmak ranging from 6km to 20km, and Sun Pumps solar water pumps with capacities from 35m to 76m.
triac constant voltage dimmable driver EUP75T-1H12V-0
Shanghai Euchips 40-240VAC 12W 12VDC triac constant voltage dimmable driver EUP75T-1H12V-0. Welcome to contact us: sales@euchips.com
1,5 ke6v8
This document provides specifications for Transil diodes that provide high overvoltage protection through clamping action. The diodes have peak pulse power ratings from 1500W up to 440V and fast response times. Electrical characteristics including leakage current, breakdown voltage, clamping voltage, and forward voltage drop are provided for various diode models in tables and graphs. Thermal characteristics and packaging information is also included.
Tempest EMI Filters
Premier’s Tempest EMI Power Line Filters provide off the shelf performance for both moderate and severe environments.
Visit site for more information about Tempest EMI Filters.
McWong_Sensors_&_Controls_Catalog_2015
This document contains wiring diagrams and instructions for connecting various occupancy sensor models to power sources and lighting loads. It also includes specifications for the sensor models, such as voltage input, load capacity, mounting details, and certifications. The sensor models can be ceiling mounted or installed in wall switches, and use PIR, ultrasonic, or dual technology detection methods to automatically control lighting based on occupancy or vacancy.
Original N-Channel Mosfet CEP83A3 30V 100A TO-220 New CET
This document summarizes the specifications of an N-channel enhancement mode field effect transistor (FET) in a TO-220 or TO-263 package. It has a drain-source breakdown voltage up to 30V, continuous drain current up to 100A, and on-resistance as low as 5.3mΩ at a gate-source voltage of 10V. The document provides detailed maximum ratings, electrical characteristics, and test conditions. Graphs depict characteristics such as output, transfer and capacitance curves, and switching waveforms are shown.
Terbella power plant
The document discusses the Tarbela Power Station in Pakistan. It contains 14 questions and answers about the power station. Some key details:
- There are 14 units at the Tarbela Power Station that can generate a total of 3478MW of electricity. Units 1-10 are 175MW each, while units 11-14 are 432MW each.
- The station uses "Frances turbines". The diameter of the penstock is 24.5 inches and the Main Inlet Valve is 48.5 inches.
- The penstock pressure is 150 bar. The pressure of the cooling water system is 10 bar. The lubrication oil system has a maximum pressure of 400 Psi.
-
Tecnotion tl series_specsheet
This document provides specifications for Tecnotion BV's TL series iron core motors in versions 6, 9, 12, 15, 18, and 24. It lists performance details such as maximum force, speed, electrical properties including current and resistance, and mechanical dimensions. The motors feature integrated water cooling and can be mounted on magnet plates of different sizes with mounting instructions provided.
Kripa Inverter UPS
The document describes Kripa Inverters and UPS products, including their features and specifications. Kripa offers inverters and UPS from 600VA to 5000VA capacity. Their products provide pure sine wave output and have user-friendly LED/LCD displays. The inverters and UPS can run appliances like lights, fans, TVs, ACs and protect equipment from power fluctuations, offering backup times based on capacity. Kripa provides 7 years warranty and services customers in Kerala, India.
Tbxlha 6565 c-vtm
The TBXLHA-6565C-VTM is a tri-band dual-polarization antenna with three independent antennas under one radome covering the frequency bands of 824-960 MHz, 1710-1880 MHz, and 1850-2180 MHz. It has a 65 degree horizontal beamwidth and can provide up to 8 degrees of electrical tilt control compatible with Andrew's Teletilt remote control system. Key specifications include gains between 14.5-17.5 dBi across the bands, front-to-back ratios over 25 dB, and maximum wind loading of 922 N at 150 km/h.
Original N-channel MOSFET MMF70R900P 70R900P 70R900 750V 5A TO-220 New MagnaC...
Original N-channel MOSFET MMF70R900P 70R900P 70R900 750V 5A TO-220 New MagnaChip Semiconductor
https://authelectronic.com/original-n-channel-mosfet-mmf70r900p-70r900p-70r900-750v-5a-to-220-new-magnachip-semiconductor
POWERVAMP LTD. > GPU 2000
The GPU 2000 is a 2000 amp battery pack used to start larger turbine engines. It has a 38 amp/hr capacity from two 13V batteries in series and can operate from -40C to +40C. Weighing 70 lbs, it is used widely by the British military and offshore operators to start Lynx helicopters, ALF 502 turboprops, and BAe 146 aircraft. The GPU 2000 has a rugged stainless steel case and high-quality components designed for reliability in harsh environments.
HVA200 200 kV VLF/DC tester from B2 ELECTRONIC
The high power HVA200 VLF/DC tester is capable of testing cables up to 138 kV with a test voltage of 1,7 x Uo and allows diagnostics with Partial Discharge and Tan Delta. It is the smallest and lightest high voltage hipot tester offering Very Low Frequency testing at 0.1 Hz as well as DC output up to 200 kV.
Quadri elettrici per vaporizzatori - Control box for lpg vaporizers
The document discusses standard control boxes for vaporizing liquid gases, listing models that range in capacity from 30 to 1000 kg/h. It notes the control boxes come in an IP65 version with a steel enclosure for installation in safe areas, and optionally an Eexd version. Standard models are listed along with their vaporizing capacity, power requirement, and operating voltage.
generator basic specifications medisky llc dubai
Medisky produces generating sets from 10-2000 KVA that run on diesel or gas for emergency power or parallel operation with mains power. They are available in normal, automatic, or soundproofed versions mounted on a foundation, encased, in a container, or truck-mounted. Generating sets include alternators from manufacturers like Stanford, Marelli, and Meccalte. Control and monitoring panels can be manual, automatic, or for parallel systems.
Ls catalog thiet bi dien mv drive e_110628_dienhathe.vn
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
What's hot (19)
Liebert ita-10 kva, Emerson Bangladesh, Online UPS Bangladesh
Liebert ita-10 kva, Emerson Bangladesh, Online UPS Bangladesh
triac constant voltage dimmable driver EUP75T-1H12V-0
triac constant voltage dimmable driver EUP75T-1H12V-0
Original N-Channel Mosfet CEP83A3 30V 100A TO-220 New CET
Original N-Channel Mosfet CEP83A3 30V 100A TO-220 New CET
Original N-channel MOSFET MMF70R900P 70R900P 70R900 750V 5A TO-220 New MagnaC...
Original N-channel MOSFET MMF70R900P 70R900P 70R900 750V 5A TO-220 New MagnaC...
Quadri elettrici per vaporizzatori - Control box for lpg vaporizers
Quadri elettrici per vaporizzatori - Control box for lpg vaporizers
Ls catalog thiet bi dien mv drive e_110628_dienhathe.vn
Ls catalog thiet bi dien mv drive e_110628_dienhathe.vn
Viewers also liked
10kW Solar Canopy
A 14kW solar canopy was installed at an industrial site to provide renewable energy and power electric vehicle charging stations. The solar canopy generates electricity year-round to charge EVs and reduce the site's carbon footprint through clean energy generation.
Solar System proposal
This document proposes a solar power system for the PIPS project and provides technical details. It recommends a 45kW solar panel system with polycrystalline solar modules, an MPPT charge controller, deep cycle maintenance-free batteries, and a 60kVA inverter. Installation details are included along with cost estimates totaling approximately 37 million Pakistani rupees. Technical specifications conform to international standards.
10 MW Solar PV power Plant - CPM & PERT, Design
This document discusses the design of a 10 MW solar PV power plant consisting of 20 sections of 500 kW each. It includes details of the number of solar panels, inverters, junction boxes, and other infrastructure needed. A critical path method (CPM) network diagram shows the key activities in the project, including site assessment, design, procurement, mounting structure erection, panel erection, cabling, commissioning, and their durations and dependencies. The critical path is shown to be either 14 or 18 weeks depending on the pathway taken.
10 kwp-solar-rooftop-system
The document proposes a 10 KWp rooftop solar PV system for a site in New Delhi, India. It would include 50 200-watt solar panels producing an estimated annual output of 14.75 MWh. A single 10 KW inverter would connect the system to the local grid. Mounting structures made of galvanized steel would support the panels at a 30 degree tilt and be fixed into concrete foundations. Electrical components like cables and junction boxes are also specified.
Drawings & Documents Required for Solar Projects
List of most essential drawings and documents needed for successful implementation of solar projects.
Project Proposal on 10 MW Solar PV Power Plant
By installing and successfully operating 10 MW photovoltaic (PV) power plants will deliver electricity for consumption by the owners, the relevant peoples in the project assessment place will be made aware of the technical and economic potential of solar power generation. Furthermore, the power required from the public grid will be reduced, and overall expenditure on electric power will be lowered & our project aims to create the necessary awareness among the population, and especially among policy-makers and large investors, Youngsters.....
Financial Feasibility of Solar Power Plant in India
This document analyzes the financial feasibility of building a 10MW solar power plant in India. It finds that the project has a low return on investment based on current conditions, but could become more viable if conversion efficiency increases and government incentives continue. A sensitivity analysis shows that returns are highly dependent on power purchase agreement rates, taxes, and conversion efficiency. The project may only be profitable if government policies strongly support the solar energy sector. Foreign investment from countries like Spain could see higher returns. Overall, the solar power sector in India depends heavily on government incentives and support.
Viewers also liked (7)
Financial Feasibility of Solar Power Plant in India
Financial Feasibility of Solar Power Plant in India
Similar to Ampair 10kW - technical specifications
FPI 1000P
This document provides specifications for an FPI 1000P generator set including:
- Power ratings of 1000kVA at 50Hz and 995.2kVA at 60Hz at 0.8 power factor
- Prime and standby power definitions and usage limitations
- Engine model, speed, cooling and lubrication details
- Alternator model, voltage regulation, and performance data
- Standard enclosure dimensions and optional enhanced enclosure specifications
Ingersoll Rand MT250 Microturbine Product Spec 080LTb
The document summarizes the key features and specifications of the MT250 Series Microturbine from Ingersoll Rand. It is a 250 kW continuous onsite electrical power generation system with integrated heat recovery. Some of its main components include a patented recuperator and combustor, as well as a synchronous generator. It can operate in grid-parallel or grid-isolated modes and meets stringent emissions regulations.
TMEIC MVG 2 Medium Voltage Drive up to 19,500 KVA at 11 kv
High Reliability, Energy Efficiency, Lower Harmonic Distortion, Local Sales ,Service, & Technical Support, 20 + year Capacitor life, bump less , make-before-break transfer
Ss 11317131-18321546-144
This document provides specifications for a Caterpillar 3412C generator set. It can generate between 680-900 kVA at 50 Hz. The generator set has a V-12 four-stroke water-cooled diesel engine that is 27.02L in displacement. It also includes a SR500 alternator, EMCP 4 control panel, radiator cooling system, and other standard equipment. Optional equipment can be added such as circuit breakers, exhaust components, and starting/charging systems. Dimensions and performance data are also listed.
Govindarajan Chittaranjan_Poster_CANWEA_2009
This document summarizes an advanced airborne wind turbine design with the following key points:
1) It uses twin rotors on a transversal axis with helium-impregnated technologies to remain airborne, along with ring generators over 5MW on each side for power transmission.
2) An adaptive model predictive control system with learning abilities controls a 3-phase 45kW motor for dynamic feathering of the rotor blades to maintain geostationary positioning against wind forces.
3) Active filters are used to smooth output, reduce electromagnetic interference, and improve power factor for the energy transmitted via radio frequency to the ground.
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
Power u ps hip3300 presentation
This document describes the HIP3300 Series 3Phase/3Phase online UPS system for power capacities between 10-500kVA. The UPS features a module design and uses digital signal processor control and PFC technology. It is suitable for applications such as computer rooms, telecom infrastructure, and healthcare equipment.
Riello master-ups-vdc
Master MHF series is a scaleable UPS system incorporating a VDC or VDC-XE flywheel. The UPS is ideal for ECO targetted datacentres looking to achieve the lowest possible PUE ratios and highest operational resilience.
FPI 600P
This document provides specifications for an FPI 600P generator set including:
- Frequency and voltage ratings at 50Hz and 60Hz
- Prime and standby power ratings
- Engine data such as model, cylinders, cooling system, emissions rating
- Electrical system ratings and alternator data
- Dimensions and shipping information
Avp694 6 compressed
This document provides specifications for an AVP694-6 generator set manufactured by AKSA Power Generation. It includes:
- Technical details on the Volvo engine, Stamford alternator, and DSE control panel components of the generator set.
- Dimensions and weights for the unit in both an enclosed and open skid configuration.
- Performance details like fuel consumption rates, sound levels, and voltage regulation capabilities.
- Standard features like the base fuel tank, battery charger, and residential grade silencer.
- Optional accessories available for custom configurations.
Catalog biến tần Frenic eHVAC - beeteco.com
Catalog biến tần Frenic eHVAC - beeteco.com
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
TURBINA DE VIENTO AGW 110 2.1 WEG MEXICO
Nos es muy grato informarle que dado el éxito de nuestra compañía en Brasil en lo que corresponde al segmento de Generación Eólica, nos encontramos en posibilidades ya de suministrar estos sistemas eólicos para el mercado Mexicano (Torres, Aspas, Generadores, Convertidores, Transformadores, Transmisión etc) todo de nuestra marca WEG y hecho en las fábricas de nuestro Grupo. Daniel García: rep-dgarcia@weg.net
Ls catalog thiet bi dien mv drive e_110628
This document provides information about medium voltage variable frequency drives (MV VFDs) including:
- MV VFDs are available in voltage classes from 3kV to 10kV and capacities from 200kVA to 11,000kVA.
- They use sensorless vector control and multi-level pulse width modulation to generate strong torque at low speeds.
- MV VFDs can provide energy savings of up to 30% compared to damper-based airflow control systems through optimized motor control.
- Additional features include automatic motor parameter measurement, built-in cell bypass for redundancy, high power factor control, and monitoring interfaces.
We got a Secret!
The document introduces Cummins Power Generation's energy solutions capabilities, which include natural gas and waste-to-energy generator sets ranging from 300 kW to 30 MW for applications such as cogeneration, peak power, and remote prime power. It provides details on generator set models, their emissions levels and fuel compatibility, as well as case studies on projects for greenhouses and the Tennessee Valley Authority.
Fuji tu dong hoa renic ehvaccatalog-dienhathe.org
The document discusses Fuji Electric's new FRENIC-eHVAC AC drive for HVAC applications. It offers optimized energy savings for fans and pumps used in HVAC through appropriate flow rate and air flow adjustments. It has built-in EMC filters and other features for efficiency and maintenance like PID control, customizable logic, and communication protocols. The document provides specifications for the drive such as voltage and current ratings, cooling methods, and dimensions for various models.
AS-6M30 PERC Module Specification
This document provides information on Amerisolar photovoltaic modules. It summarizes that the modules have a maximum efficiency of 18.44% using PERC technology, are highly reliable under extreme temperatures and weather conditions, and come with a 12-year limited warranty and performance guarantee. The modules are certified to numerous international standards and are engineered to withstand heavy wind and snow loads.
Delta Power Conditioning System 100kW
The 100kw PCS by Delta Electronics Australia is a grid forming bi-directional inverter. The PCS is capable of delivering energy from Lithium ion batteries upto a 6C rate.
You can also parallel upto 4 of these units to deliver impressive peak demand shaving.
The renewable microgrid sector will gain a large advantage with the adoption of PCS 100
01.C2000D5-DS48-CPGK.pdf
This document provides specifications for a Cummins diesel generator set model C2000 D5. Key details include:
- The generator set has a standby rating of 2063 kVA and prime rating of 1875 kVA at 50 Hz.
- It is powered by a Cummins QSK60-G3 V16 cylinder diesel engine with a gross power output of 1790 kWm for standby rating.
- Other engine details include a bore of 159 mm, stroke of 190 mm, and rated speed of 1500 rpm.
- The generator has a brushless revolving field alternator with a temperature rise of 150°C for standby rating.
EUREC-NTUA Projects - Carlos Silva
- A wind farm study analyzed 1 year of wind data from a site including average wind speed, direction, and other parameters.
- Based on the data, a 100m diameter 2MW wind turbine was selected as the optimal design with the lowest LCOE and highest annual energy output.
- Performance simulations were conducted on the turbine, showing how its pitch, speed, power, and forces vary with wind speed.
- For integrating wind power onto the existing grid, the maximum penetration was found to be 10MW of wind (5 turbines), providing around 20% of annual electricity with 30.8% curtailment and a 26.88% capacity factor.
Similar to Ampair 10kW - technical specifications (20)
Ingersoll Rand MT250 Microturbine Product Spec 080LTb
Ingersoll Rand MT250 Microturbine Product Spec 080LTb
TMEIC MVG 2 Medium Voltage Drive up to 19,500 KVA at 11 kv
TMEIC MVG 2 Medium Voltage Drive up to 19,500 KVA at 11 kv
Offshore platform powered with new electrical motor drive system_presentation...
Offshore platform powered with new electrical motor drive system_presentation...
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Cell Modules and 60 cell modules (multi-crystalline)
Recently uploaded
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Things to Consider When Choosing a Website Developer for your Website | FODUU
Choosing the right website developer is crucial for your business. This article covers essential factors to consider, including experience, portfolio, technical skills, communication, pricing, reputation & reviews, cost and budget considerations and post-launch support. Make an informed decision to ensure your website meets your business goals.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
In this blog post, we'll delve into the intersection of AI and app development in Saudi Arabia, focusing on the food delivery sector. We'll explore how AI is revolutionizing the way Saudi consumers order food, how restaurants manage their operations, and how delivery partners navigate the bustling streets of cities like Riyadh, Jeddah, and Dammam. Through real-world case studies, we'll showcase how leading Saudi food delivery apps are leveraging AI to redefine convenience, personalization, and efficiency.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Recently uploaded (20)
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Things to Consider When Choosing a Website Developer for your Website | FODUU
Things to Consider When Choosing a Website Developer for your Website | FODUU
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Ampair 10kW - technical specifications
- 1. Ampair® 10 kW wind turbine TECHNICAL SPECIFICATIONS MCS certified product Eligible for Feed-in-tariffs Generates power continuously from below 3 m/s Simple robust design Tested in the strongest IEC class I wind conditions Suitable for coastal locations Multiple tower options Models for grid connection, battery charging, or direct heating
- 2. Ampair® 10 kW wind turbine Tower options: Base hinged tilting monopoles with hydraulic raise/lower: 15 m (49 ft), 18 m (59 ft) Base hinged tilting monopoles with ginpole winch raise/lower: 15 m (49 ft), 18 m (59 ft) Guyed tubular with ginpole winch: 18m, 24m, 30m Technical Specifications Reference Power 9.17 kW at 11.0 m/s (24.6 mph) Maximum Power 11.48 kW at 15.0 m/s (33.5 mph) Annual Energy Prod’n 13,971 kWh at 5m/s (11.2 mph) (per IEC, MCS, AWEA, RUK standards) Rotor Diameter 6.4 m (21.0 ft) Rotor Swept Area 32.15 m2 (346 ft2) Weight 420 kg (926 lb) for nacelle + blades Type Upwind 3-bladed HAWT Control Passive side-furling and current limiting reactor (choke) with PWM dump load Direction of Rotation Clockwise looking downwind Blades 3 fibreglass reinforced composite Rotor Speed Range Design operating 194rpm at 14m/s; maximum 792 rpm Sound Power Level 88.5 dB(A) at 8 m/s; slope 1.58 dB/m/s Generator Permanent magnet brushless Gearbox None (direct drive) Yaw Control Passive AC Grid Feeding Inverter connection for: single phase 220-240V; 50 or 60Hz split phase 440-480V; 50 or 60Hz three phase 380-415V; 50 or 60Hz DC Battery Charging 120 Vdc Heating Option With grid feed model or stand-alone Braking System Manually activated furling cable plus dump load and electrical shorting brake Cut-in Wind Speed 2.95 m/s (6.6 mph) Reference Wind Speed 11.0 m/s (24.6 mph) Cut-out Wind Speed None – continuous generation to survival wind speed Survival Wind Speed Tested for IEC class I: Vref (10-min avg) 50 m/s (112 mph) Ve50 (3-sec gust) 70 m/s (156 mph) Manufactured In the UK by Ampair Introduced 1984 Certification MCS certification by BRE (per IEC 61400-2; -12-1; -14) Warranty 5 years per Ampair Terms & Conditions Ampair 3A Carmavy Road, Crumlin Co Antrim, BT29 4TF, UK T. +44 (0) 028 9445 2437 W. www.ampair.com E. sales@ampair.com Data taken from MCS Summary Report WWCD-3018 Rev 1.0 20/07/2014