Ampair 3kW - technical specifications
•
0 likes•592 views
The Ampair 3 kW wind turbine is a simple, robust design suitable for coastal locations that can generate power continuously from wind speeds of 3 m/s. It comes in multiple tower options and models for grid connection, battery charging, or direct heating. Key specifications include a 3.6 m rotor diameter, 210 kg weight, passive furling and current limiting control, and power outputs of 2 kW at 11 m/s and 3.25 kW at 15.5 m/s.
Report
Share
Report
Share
Download to read offline
Recommended
Ampair 20kW - technical specifications
The Ampair 20 kW wind turbine is a simple, robust turbine suitable for coastal locations. It has a 10.4 meter rotor diameter and can generate power continuously from wind speeds above 3 m/s. Tower options include tilting monopoles from 15-18 meters and guyed tubular towers from 18-30 meters. The turbine is tested to withstand the strongest IEC class 1 wind conditions and has a 5 year warranty.
Ampair 10kW - technical specifications
The Ampair 10 kW wind turbine is a small wind turbine that is MCS certified and eligible for feed-in tariffs. It has a simple, robust design that can generate power continuously from wind speeds above 3 m/s. It has multiple tower and mounting options and can be used for grid connection, battery charging, or direct heating. Key specifications include a 6.4 m rotor diameter, 11.48 kW maximum power output, and certification to stringent IEC wind conditions standards.
Ampair 6kW - technical specifications
The Ampair 6 kW wind turbine is a small wind turbine that is MCS certified, eligible for feed-in tariffs, and generates power continuously from wind speeds above 3 m/s. It has a simple, robust design tested to withstand the strongest wind conditions, and is suitable for coastal locations. Tower options include tilting monopoles and guyed towers from 15-30m, and it can be used for grid connection, battery charging, or direct heating.
FITCRAFT SaveBox M Energy Storage Kit
The document describes the SAVEBOX M, a device for storing large quantities of electric energy consisting of a powerful battery pack, DC/AC inverter, charger, and PV charger. It has an AC output voltage of 230V and frequency of 50Hz. It can output a maximum of 60A of AC current when connected to a generator. The device uses LiFePo4 battery cells with a lifetime of 4000 charge cycles and can be stored offline for 6 months with only a 6% daily self-discharge when the AC is on but not loaded. It has automatic bypass in 10ms and monitors voltage, current, temperature, and energy levels. Dimensions are 1200 x 800 x 1307 mm. Accessories include
The Savebox S Scalable Lithium Ion Storage Product
The SAVEBOX S is a battery storage system consisting of a lithium iron phosphate battery pack, DC/AC inverter, charger, and optional photovoltaic charger. It can store up to 9 kWh of electric energy and output 240V AC power at up to 3 kW continuous or 6 kW peak power for backup applications. The lithium iron phosphate batteries are rated for over 4000 charge cycles and the system is housed in an IP44 rated enclosure measuring 680 x 670 x 850 mm.
SaveBox L Datasheet
The SAVEBOX L is a 3-phase battery storage system consisting of a battery pack, inverter, charger, and PV charger. It has an output of 3 x 8.5 kW, stores up to 60 kWh of energy in LiFePO4 batteries, and can fully charge in 5 hours via AC input or support a 10.5 kWp solar array. The unit has dimensions of 1600 x 1600 x 1260 mm.
Avnet Electronics Marketing and STMicro Power Devices for Solar Inverters
Avnet Electronics Marketing and STMicro Power Devices for Solar InvertersAvnet Electronics Marketing
Avnet Electronics Marketing presents power devices for solar inverters from STMicroelectronics. Presentation includes: ST 600 vs. SiC diodes, Power MOSFET families, MDmesh series. Choosing the ideal switches for solar inverters and more.250w Enphase Micro Inverter
The Enphase M250 Microinverter delivers increased energy harvest and reduces design and installation complexity with an all-AC approach. It has an isolated and insulated DC circuit that does not require a Ground Electrode Conductor, simplifying installation and enhancing safety. The M250 integrates seamlessly with Enphase accessories and monitoring software. It is optimized for higher-power modules, maximizes energy production, and minimizes impacts of shading, dust and debris.
Recommended
Ampair 20kW - technical specifications
The Ampair 20 kW wind turbine is a simple, robust turbine suitable for coastal locations. It has a 10.4 meter rotor diameter and can generate power continuously from wind speeds above 3 m/s. Tower options include tilting monopoles from 15-18 meters and guyed tubular towers from 18-30 meters. The turbine is tested to withstand the strongest IEC class 1 wind conditions and has a 5 year warranty.
Ampair 10kW - technical specifications
The Ampair 10 kW wind turbine is a small wind turbine that is MCS certified and eligible for feed-in tariffs. It has a simple, robust design that can generate power continuously from wind speeds above 3 m/s. It has multiple tower and mounting options and can be used for grid connection, battery charging, or direct heating. Key specifications include a 6.4 m rotor diameter, 11.48 kW maximum power output, and certification to stringent IEC wind conditions standards.
Ampair 6kW - technical specifications
The Ampair 6 kW wind turbine is a small wind turbine that is MCS certified, eligible for feed-in tariffs, and generates power continuously from wind speeds above 3 m/s. It has a simple, robust design tested to withstand the strongest wind conditions, and is suitable for coastal locations. Tower options include tilting monopoles and guyed towers from 15-30m, and it can be used for grid connection, battery charging, or direct heating.
FITCRAFT SaveBox M Energy Storage Kit
The document describes the SAVEBOX M, a device for storing large quantities of electric energy consisting of a powerful battery pack, DC/AC inverter, charger, and PV charger. It has an AC output voltage of 230V and frequency of 50Hz. It can output a maximum of 60A of AC current when connected to a generator. The device uses LiFePo4 battery cells with a lifetime of 4000 charge cycles and can be stored offline for 6 months with only a 6% daily self-discharge when the AC is on but not loaded. It has automatic bypass in 10ms and monitors voltage, current, temperature, and energy levels. Dimensions are 1200 x 800 x 1307 mm. Accessories include
The Savebox S Scalable Lithium Ion Storage Product
The SAVEBOX S is a battery storage system consisting of a lithium iron phosphate battery pack, DC/AC inverter, charger, and optional photovoltaic charger. It can store up to 9 kWh of electric energy and output 240V AC power at up to 3 kW continuous or 6 kW peak power for backup applications. The lithium iron phosphate batteries are rated for over 4000 charge cycles and the system is housed in an IP44 rated enclosure measuring 680 x 670 x 850 mm.
SaveBox L Datasheet
The SAVEBOX L is a 3-phase battery storage system consisting of a battery pack, inverter, charger, and PV charger. It has an output of 3 x 8.5 kW, stores up to 60 kWh of energy in LiFePO4 batteries, and can fully charge in 5 hours via AC input or support a 10.5 kWp solar array. The unit has dimensions of 1600 x 1600 x 1260 mm.
Avnet Electronics Marketing and STMicro Power Devices for Solar Inverters
Avnet Electronics Marketing and STMicro Power Devices for Solar InvertersAvnet Electronics Marketing
Avnet Electronics Marketing presents power devices for solar inverters from STMicroelectronics. Presentation includes: ST 600 vs. SiC diodes, Power MOSFET families, MDmesh series. Choosing the ideal switches for solar inverters and more.250w Enphase Micro Inverter
The Enphase M250 Microinverter delivers increased energy harvest and reduces design and installation complexity with an all-AC approach. It has an isolated and insulated DC circuit that does not require a Ground Electrode Conductor, simplifying installation and enhancing safety. The M250 integrates seamlessly with Enphase accessories and monitoring software. It is optimized for higher-power modules, maximizes energy production, and minimizes impacts of shading, dust and debris.
Save Box All In One Energy Storage Solution
Savebox HOME is an energy storage and power management device consisting of a LiFePO4 battery pack, control electronics, DC/AC inverter/charger, and PV charger. It is intended for domestic use and has a single phase AC output of 230V, 32A input/output protection, and can switch between grid and off-grid power in less than 15ms. Key specifications include a 150V/70A MPPT PV charger, >4000 cycle battery life, Ethernet and NFC connectivity, and air cooling with automatic airflow regulation. Models include options for inverter power between 2-6.5kVA, battery capacity between 4.3-7.2kWh, and recommended PV array
Solar Edge p320-p505
The document summarizes SolarEdge's Power Optimizer, which is designed to work with SolarEdge inverters. It allows for up to 25% more energy production compared to traditional solar systems. The Power Optimizer provides module-level voltage shutdown for safety and monitoring. It comes with a 25-year warranty and is compatible with all SolarEdge single and three phase inverters.
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
Ulx inverter series residential single phase transformer-based
The ULX inverter series features single- phase, transformer-based indoor and outdoor cabinets. For more info, visit http://www.danfoss.in/
Trina Honey Datasheet
Trina Solar provides a 10-year product warranty and 25-year linear power warranty for its solar photovoltaic modules. The warranty guarantees that the modules will produce at least 80% of their rated power after 5 years, declining linearly to 90% after 10 years, and no less than 80% after 25 years. Trina Solar aims to provide high quality products and exceptional customer service globally through its local presence and partnerships with installers, developers, and distributors.
Stp9000 tl den131418w
The document describes the Sunny Tripower 5000TL-9000TL three-phase inverters for home PV systems ranging from 5-9 kW. Key features include high maximum efficiency of 98%, optimal temperature and shade management, easy installation and connection, integrated grid support functions, and monitoring via Bluetooth and an external portal. The inverters are designed for flexibility with a wide input voltage and power range and modular plant design.
www.euchips.com Triac constant voltage dimmable driver EUP45T-1WMC-0
www.euchips.com Triac constant voltage dimmable driver EUP45T-1WMC-0Shanghai Euchips Industrial Co.,Ltd.
1. Single channel output, Output current level selectable by DIP S.W.
2. Support Leading edge (TRIAC) and Trailing edge (ELV) Dimmer
3. High efficiency up to 87%
4. Wide range of input voltage 40‐240VAC
5. The dimming curve smooth
6. Output short‐circuit protection, over current protection
7. Suitable for indoor LED lighting applicationSeraphim Datasheet
This document provides specifications for Seraphim Solar's SRP-6PB series photovoltaic modules rated between 250-265W. Key details include:
- Modules meet various international safety and reliability certifications
- Modules are PID free and have passed voltage durability testing
- Electrical specifications are provided for each wattage module including power, voltage, current and efficiency ratings
- Modules have a 25 year linear power output warranty and are constructed with tempered glass, aluminum frames and junction boxes rated for outdoor use.
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
215w Enphase Micro Inverter
The Enphase M215 Microinverter delivers increased energy harvest and reduced installation complexity through its all-AC, isolated DC circuit design that does not require a Ground Electrode Conductor. It seamlessly integrates with Enphase accessories and monitoring software. Key features include maximized energy production, minimized impact of shading and debris, no single point of failure, and industry-leading warranty of up to 25 years.
SMA 1.5 Solar Inverter
The Sunny Boy 1.5/2.5 inverters are versatile, flexible solar inverters for small PV systems. They have a broad input voltage range, integrated wireless connectivity, and easy commissioning via a web interface. The inverters are lightweight for simple installation and have no moving parts, requiring no maintenance due to convection cooling. System monitoring and control can be done remotely via the web interface on any smartphone or tablet.
Product: UPS: UniStar V
This document provides specifications for the UniStar V line of UPS systems, including models ranging from 1-3kVA for 120V or 230V single phase systems. It describes the tower/rack mounting design, modular battery packs for extended runtime, and optional accessories like external bypass switches or SNMP cards. Product details are provided for each UPS model and battery configuration including dimensions, weights, input/output connections and battery runtimes.
Power vamp gpu2000s
The GPU 2000 is a portable battery pack that provides 2000 amps of peak power. It is designed for use on helicopters and small aircraft with shaft turbines. Some key features include a 38 amp/hr capacity from two 13V battery cells in series, ambient temperature operation from -40°C to +40°C, and dimensions of 450mm x 440mm x 110mm. It can be connected in parallel with another GPU 2000 unit to double its capacity and power output.
SMA 3.0-5.0 Grid Tied Solar String Inverter
The document summarizes the Sunny Boy 3.0-5.0 solar inverters. It discusses their integrated monitoring service, SMA Smart Connected, which automatically monitors the inverters for anomalies and proactively informs installers and customers of issues to minimize downtime. The inverters are suited for residential solar installations due to their lightweight design and easy commissioning via the webserver. Current communication standards allow for adding energy storage and management solutions flexibly over time.
HMR Philippines - Power Generation Unit
HMR Philippines - Machinery and power generation unit is proud to represent a wide range of brand new power generator sets from 1.5KW to 1200KW from different manufacturers such as Cummins and Isuzu.
We provide 1 Year Warranty directly from the manufacturer with full technical service and support.
We provide the installation work and material directly from the manufacturer.
Spare parts available at anytime directly from the manufacturer.
Trina Duomax 250w Solar Module
Trina Solar is a leading global manufacturer of photovoltaic products. They believe close cooperation with partners is critical to success. They are committed to building strategic partnerships to drive shared success. Their products include mono and multi solar modules that offer improved durability, enhanced safety, and increased value through a 30-year linear warranty.
Datesheet evershine tl5000
1) The document discusses single-phase string inverters ranging from 1.5 kW to 5 kW for converting DC power from photovoltaic panels to AC power.
2) It provides technical specifications for the inverters such as maximum power input, voltage ranges, efficiency ratings, dimensions, certifications and approvals.
3) The inverters are designed for residential solar installations and offer high conversion efficiency and ease of use.
Ja solar-310-mono
This document provides specifications for JA Solar's JAM60S01 290-310/PR series PERC monocrystalline silicon solar modules. The 310W modules use high-efficiency PERCIUM cells and provide high performance with excellent low-light performance. Key features include a power output warranty of 25 years with 97% of the initial power output maintained after 25 years.
Axpert V Solar Inverter
This document provides specifications for several off-grid inverter models from Advancing Power including the Axpert VP, Axpert VM, and Axpert VM II series. It lists the key electrical specifications such as rated power output, input voltage range, output voltage regulation, efficiency, and battery requirements. Additional details are given for the solar charger and AC charger functionality, including maximum solar and AC charge currents and PV array specifications. Physical dimensions and weights are provided. The document also includes an image comparing several models and describes the off-grid inverters as producing pure sine wave output and having configurable input priority and overload protection.
SolarWorld SW255 Poly
The document summarizes the specifications of SolarWorld's SW 245-255 poly solar photovoltaic modules. Key details include:
1) The modules have fully-automated production and quality control to ensure high performance.
2) They come with a 25-year linear performance guarantee of no more than 0.7% annual degradation in power output as well as an extended 10-year product warranty.
3) Module power outputs range from 245W to 255W under standard test conditions with a positive power tolerance of 0-5W.
01.C2000D5-DS48-CPGK.pdf
This document provides specifications for a Cummins diesel generator set model C2000 D5. Key details include:
- The generator set has a standby rating of 2063 kVA and prime rating of 1875 kVA at 50 Hz.
- It is powered by a Cummins QSK60-G3 V16 cylinder diesel engine with a gross power output of 1790 kWm for standby rating.
- Other engine details include a bore of 159 mm, stroke of 190 mm, and rated speed of 1500 rpm.
- The generator has a brushless revolving field alternator with a temperature rise of 150°C for standby rating.
More Related Content
What's hot
Save Box All In One Energy Storage Solution
Savebox HOME is an energy storage and power management device consisting of a LiFePO4 battery pack, control electronics, DC/AC inverter/charger, and PV charger. It is intended for domestic use and has a single phase AC output of 230V, 32A input/output protection, and can switch between grid and off-grid power in less than 15ms. Key specifications include a 150V/70A MPPT PV charger, >4000 cycle battery life, Ethernet and NFC connectivity, and air cooling with automatic airflow regulation. Models include options for inverter power between 2-6.5kVA, battery capacity between 4.3-7.2kWh, and recommended PV array
Solar Edge p320-p505
The document summarizes SolarEdge's Power Optimizer, which is designed to work with SolarEdge inverters. It allows for up to 25% more energy production compared to traditional solar systems. The Power Optimizer provides module-level voltage shutdown for safety and monitoring. It comes with a 25-year warranty and is compatible with all SolarEdge single and three phase inverters.
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
Ulx inverter series residential single phase transformer-based
The ULX inverter series features single- phase, transformer-based indoor and outdoor cabinets. For more info, visit http://www.danfoss.in/
Trina Honey Datasheet
Trina Solar provides a 10-year product warranty and 25-year linear power warranty for its solar photovoltaic modules. The warranty guarantees that the modules will produce at least 80% of their rated power after 5 years, declining linearly to 90% after 10 years, and no less than 80% after 25 years. Trina Solar aims to provide high quality products and exceptional customer service globally through its local presence and partnerships with installers, developers, and distributors.
Stp9000 tl den131418w
The document describes the Sunny Tripower 5000TL-9000TL three-phase inverters for home PV systems ranging from 5-9 kW. Key features include high maximum efficiency of 98%, optimal temperature and shade management, easy installation and connection, integrated grid support functions, and monitoring via Bluetooth and an external portal. The inverters are designed for flexibility with a wide input voltage and power range and modular plant design.
www.euchips.com Triac constant voltage dimmable driver EUP45T-1WMC-0
www.euchips.com Triac constant voltage dimmable driver EUP45T-1WMC-0Shanghai Euchips Industrial Co.,Ltd.
1. Single channel output, Output current level selectable by DIP S.W.
2. Support Leading edge (TRIAC) and Trailing edge (ELV) Dimmer
3. High efficiency up to 87%
4. Wide range of input voltage 40‐240VAC
5. The dimming curve smooth
6. Output short‐circuit protection, over current protection
7. Suitable for indoor LED lighting applicationSeraphim Datasheet
This document provides specifications for Seraphim Solar's SRP-6PB series photovoltaic modules rated between 250-265W. Key details include:
- Modules meet various international safety and reliability certifications
- Modules are PID free and have passed voltage durability testing
- Electrical specifications are provided for each wattage module including power, voltage, current and efficiency ratings
- Modules have a 25 year linear power output warranty and are constructed with tempered glass, aluminum frames and junction boxes rated for outdoor use.
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
215w Enphase Micro Inverter
The Enphase M215 Microinverter delivers increased energy harvest and reduced installation complexity through its all-AC, isolated DC circuit design that does not require a Ground Electrode Conductor. It seamlessly integrates with Enphase accessories and monitoring software. Key features include maximized energy production, minimized impact of shading and debris, no single point of failure, and industry-leading warranty of up to 25 years.
SMA 1.5 Solar Inverter
The Sunny Boy 1.5/2.5 inverters are versatile, flexible solar inverters for small PV systems. They have a broad input voltage range, integrated wireless connectivity, and easy commissioning via a web interface. The inverters are lightweight for simple installation and have no moving parts, requiring no maintenance due to convection cooling. System monitoring and control can be done remotely via the web interface on any smartphone or tablet.
Product: UPS: UniStar V
This document provides specifications for the UniStar V line of UPS systems, including models ranging from 1-3kVA for 120V or 230V single phase systems. It describes the tower/rack mounting design, modular battery packs for extended runtime, and optional accessories like external bypass switches or SNMP cards. Product details are provided for each UPS model and battery configuration including dimensions, weights, input/output connections and battery runtimes.
Power vamp gpu2000s
The GPU 2000 is a portable battery pack that provides 2000 amps of peak power. It is designed for use on helicopters and small aircraft with shaft turbines. Some key features include a 38 amp/hr capacity from two 13V battery cells in series, ambient temperature operation from -40°C to +40°C, and dimensions of 450mm x 440mm x 110mm. It can be connected in parallel with another GPU 2000 unit to double its capacity and power output.
SMA 3.0-5.0 Grid Tied Solar String Inverter
The document summarizes the Sunny Boy 3.0-5.0 solar inverters. It discusses their integrated monitoring service, SMA Smart Connected, which automatically monitors the inverters for anomalies and proactively informs installers and customers of issues to minimize downtime. The inverters are suited for residential solar installations due to their lightweight design and easy commissioning via the webserver. Current communication standards allow for adding energy storage and management solutions flexibly over time.
HMR Philippines - Power Generation Unit
HMR Philippines - Machinery and power generation unit is proud to represent a wide range of brand new power generator sets from 1.5KW to 1200KW from different manufacturers such as Cummins and Isuzu.
We provide 1 Year Warranty directly from the manufacturer with full technical service and support.
We provide the installation work and material directly from the manufacturer.
Spare parts available at anytime directly from the manufacturer.
Trina Duomax 250w Solar Module
Trina Solar is a leading global manufacturer of photovoltaic products. They believe close cooperation with partners is critical to success. They are committed to building strategic partnerships to drive shared success. Their products include mono and multi solar modules that offer improved durability, enhanced safety, and increased value through a 30-year linear warranty.
Datesheet evershine tl5000
1) The document discusses single-phase string inverters ranging from 1.5 kW to 5 kW for converting DC power from photovoltaic panels to AC power.
2) It provides technical specifications for the inverters such as maximum power input, voltage ranges, efficiency ratings, dimensions, certifications and approvals.
3) The inverters are designed for residential solar installations and offer high conversion efficiency and ease of use.
Ja solar-310-mono
This document provides specifications for JA Solar's JAM60S01 290-310/PR series PERC monocrystalline silicon solar modules. The 310W modules use high-efficiency PERCIUM cells and provide high performance with excellent low-light performance. Key features include a power output warranty of 25 years with 97% of the initial power output maintained after 25 years.
Axpert V Solar Inverter
This document provides specifications for several off-grid inverter models from Advancing Power including the Axpert VP, Axpert VM, and Axpert VM II series. It lists the key electrical specifications such as rated power output, input voltage range, output voltage regulation, efficiency, and battery requirements. Additional details are given for the solar charger and AC charger functionality, including maximum solar and AC charge currents and PV array specifications. Physical dimensions and weights are provided. The document also includes an image comparing several models and describes the off-grid inverters as producing pure sine wave output and having configurable input priority and overload protection.
SolarWorld SW255 Poly
The document summarizes the specifications of SolarWorld's SW 245-255 poly solar photovoltaic modules. Key details include:
1) The modules have fully-automated production and quality control to ensure high performance.
2) They come with a 25-year linear performance guarantee of no more than 0.7% annual degradation in power output as well as an extended 10-year product warranty.
3) Module power outputs range from 245W to 255W under standard test conditions with a positive power tolerance of 0-5W.
What's hot (20)
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
Ulx inverter series residential single phase transformer-based
Ulx inverter series residential single phase transformer-based
www.euchips.com Triac constant voltage dimmable driver EUP45T-1WMC-0
www.euchips.com Triac constant voltage dimmable driver EUP45T-1WMC-0
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Cell Modules and 60 cell modules (multi-crystalline)
Similar to Ampair 3kW - technical specifications
01.C2000D5-DS48-CPGK.pdf
This document provides specifications for a Cummins diesel generator set model C2000 D5. Key details include:
- The generator set has a standby rating of 2063 kVA and prime rating of 1875 kVA at 50 Hz.
- It is powered by a Cummins QSK60-G3 V16 cylinder diesel engine with a gross power output of 1790 kWm for standby rating.
- Other engine details include a bore of 159 mm, stroke of 190 mm, and rated speed of 1500 rpm.
- The generator has a brushless revolving field alternator with a temperature rise of 150°C for standby rating.
Govindarajan Chittaranjan_Poster_CANWEA_2009
This document summarizes an advanced airborne wind turbine design with the following key points:
1) It uses twin rotors on a transversal axis with helium-impregnated technologies to remain airborne, along with ring generators over 5MW on each side for power transmission.
2) An adaptive model predictive control system with learning abilities controls a 3-phase 45kW motor for dynamic feathering of the rotor blades to maintain geostationary positioning against wind forces.
3) Active filters are used to smooth output, reduce electromagnetic interference, and improve power factor for the energy transmitted via radio frequency to the ground.
UPS operation, Rev 2.pptx
The document provides an overview of 3-phase UPS operation and key concepts:
- It defines UPS systems and their role in providing power backup and conditioning. On-line UPS systems use double conversion to regulate voltage and frequency.
- The presentation discusses UPS components like rectifiers, chargers, inverters and static switches. Inverters in particular are designed for high efficiency and low harmonic distortion.
- Newer 4-level inverter designs are highlighted for reducing voltage stress on components and improving reliability compared to traditional 2-level designs.
SOLAR WATER PUMP -KONDAAS
Leader in Technology, Quality and Competitiveness Air Cooled KONDAAS's solar inverter with MPPT (VFD) Variable Frequency Drive will give maximum torque with minimum sunlight.
The system requires no battery; the panel can be directly connected to the inverter which in-turn can be connected to a 3-phase motor. The OSP based control will track & extract maximum power from the solar panel so that the motor runs at a constant torque for the wide range of intensity of sunlight-morning till evening.
This will give 35% extra energy which results in pumping 35% more water compared to the conventional 3-phase inverter +3 phase pump or DC motor based water pump.
Electrical machines for renewable energy converters keynote
The document summarizes electrical machines and power conversion technologies for renewable energy applications such as wind, wave, and tidal energy. It discusses challenges including low generator speeds, variable prime movers, and the need for direct drive or single stage gearboxes. Solutions presented include transverse flux and air-cored machines, novel support structures, switched reluctance machines, and high temperature superconducting generators. A comparative design process for evaluating different permanent magnet machine topologies is also outlined.
Power u ps hip3300 presentation
This document describes the HIP3300 Series 3Phase/3Phase online UPS system for power capacities between 10-500kVA. The UPS features a module design and uses digital signal processor control and PFC technology. It is suitable for applications such as computer rooms, telecom infrastructure, and healthcare equipment.
66kV Offshore Wind Farm - Wet Design for Higher Voltage Wind Farm Applications
This document discusses using 66kV voltages for offshore wind farm array cables as a way to reduce costs. Higher voltages allow fewer cables to be used to connect turbines over long distances, reducing cable material costs and losses. The document presents analysis showing that converting three sample wind farms from 33kV to 66kV array voltages could reduce cable lengths by up to 45% and losses by up to 46%, demonstrating the potential cost savings of the higher voltage approach. It proposes a design for 66kV array cable systems and notes ongoing testing of these higher voltage cable arrays.
Kollmorgen powersync catalog
This document provides specifications for Pacific Scientific synchronous motors including:
- Performance curves showing torque vs inertia for 72 RPM and 60 RPM motors.
- Tables listing torque, inertia, current and other ratings for various NEMA 34 and 42 frame motors.
- Diagrams of phase shift networks required for motor startup.
- Information on selecting resistor and capacitor values for phase shift networks.
Ingersoll Rand MT250 Microturbine Product Spec 080LTb
The document summarizes the key features and specifications of the MT250 Series Microturbine from Ingersoll Rand. It is a 250 kW continuous onsite electrical power generation system with integrated heat recovery. Some of its main components include a patented recuperator and combustor, as well as a synchronous generator. It can operate in grid-parallel or grid-isolated modes and meets stringent emissions regulations.
GEA32208 GEs 3MW Platform_Brochure_R6
GE Renewable Energy has invested over $2 billion since 2002 to develop next-generation wind turbine technology. Their 3MW platform provides more power and efficiency through components scaled up from 2.5MW models. The 3MW platform includes the 3.4-137 turbine, which can achieve up to 24% higher output than GE's 2.75-120 turbine. Through integrated big data and software tools, the 3MW platform and Digital Wind Farm capabilities allow customers to better manage wind power on the grid.
WEG DC Motors
WEG manufactures DC motors with power ratings up to 10,000 kW. The motors have robust construction and are suitable for applications in industries like paper, plastics, and steel rolling. The DC motors offer features like wide speed variation, high efficiency, and ability to handle dynamic loads. WEG provides related products like converters and controllers to create complete DC drive systems.
Medium-Voltage, Gas-Insulated Arc-Resistant Switchgear Types 8DA10 & 8DB10
- Siemens medium-voltage gas-insulated arc-resistant switchgear provides increased safety, improved reliability, and increased flexibility with innovative features in a compact design that is easy to use and cost effective.
- It uses SF6 gas insulation for all primary components, which provides advantages over air insulation including a compact footprint, higher dielectric strength, and maintenance-free operation in a controlled gas environment.
- Key benefits include enhanced personnel safety due to its arc-resistant design, high operational availability and reliability due to its sealed pressure system, and minimized maintenance requirements over its lifetime.
TMEIC MVG 2 Medium Voltage Drive up to 19,500 KVA at 11 kv
High Reliability, Energy Efficiency, Lower Harmonic Distortion, Local Sales ,Service, & Technical Support, 20 + year Capacitor life, bump less , make-before-break transfer
AW3000
ACCIONA Windpower has seen explosive growth of orders for its AW3000 platform. This success is due to a track record of reliability and product innovation coming from one of the most experienced wind energy companies in the world. The latest evolution is the AW132/3000 for low-wind sites, which delivers the lowest cost of energy in this segment. Partner with ACCIONA Windpower to make your projects rise above the competition.
EUREC-NTUA Projects - Carlos Silva
- A wind farm study analyzed 1 year of wind data from a site including average wind speed, direction, and other parameters.
- Based on the data, a 100m diameter 2MW wind turbine was selected as the optimal design with the lowest LCOE and highest annual energy output.
- Performance simulations were conducted on the turbine, showing how its pitch, speed, power, and forces vary with wind speed.
- For integrating wind power onto the existing grid, the maximum penetration was found to be 10MW of wind (5 turbines), providing around 20% of annual electricity with 30.8% curtailment and a 26.88% capacity factor.
Wind Turbine Generators
The document discusses different types of wind turbine generators used in wind energy technology. It covers the fundamentals of wind power generation and describes various generator and motor types used - including induction motors, permanent magnet synchronous generators, squirrel cage induction generators, wound rotor induction generators, and doubly fed induction generators. The document also discusses high temperature superconducting wind turbine generators and provides comparisons of advantages and disadvantages of different generator types.
Unit v conventional and solid state speed control of ac drives
This document discusses various methods for controlling the speed of AC induction motors, including stator-side control by varying voltage or frequency, and rotor-side control using cascade control, adding rotor resistance, or slip power recovery schemes. Stator-side control involves changing the stator voltage using autotransformers or resistors, or changing the frequency which varies the synchronous speed. Rotor-side control techniques include cascade control using two motors, adding external resistance in the rotor circuit, or recovering slip power using Kramer or Scherbius systems.
Facts on Grid Friendly Wind Plants
This document discusses how wind turbines can provide grid support functions similar to Flexible AC Transmission Systems (FACTS) devices through advanced controls of the power electronics and generator systems. It describes how doubly-fed induction generator wind turbines can regulate voltage and reactive power at the point of interconnection, provide inertial response during frequency disturbances, limit ramp rates during changes in wind speed, and improve transient stability compared to synchronous generators. The document argues that these grid support functions allow high levels of wind power to be integrated onto the grid in a reliable manner without compromising system performance.
ELECTRICAL TRACTION SYSTEM SW.-1.pptx
This document summarizes a seminar presentation on electric traction. It defines electric traction as using electric motors powered by electric power for traction systems like railways and trams. It then provides a brief history of electric traction, including its introduction in India in 1925 using 1.5kV DC power. The document discusses the typical voltages used for electric traction in India and the different types of traction systems, including DC, AC, and multi-systems. It also covers topics like types of track electrification, pantograph collectors, traction motors, leading high-speed traction systems, and the advantages and disadvantages of electric traction systems.
Similar to Ampair 3kW - technical specifications (20)
Offshore platform powered with new electrical motor drive system_presentation...
Offshore platform powered with new electrical motor drive system_presentation...
Electrical machines for renewable energy converters keynote
Electrical machines for renewable energy converters keynote
66kV Offshore Wind Farm - Wet Design for Higher Voltage Wind Farm Applications
66kV Offshore Wind Farm - Wet Design for Higher Voltage Wind Farm Applications
Ingersoll Rand MT250 Microturbine Product Spec 080LTb
Ingersoll Rand MT250 Microturbine Product Spec 080LTb
Medium-Voltage, Gas-Insulated Arc-Resistant Switchgear Types 8DA10 & 8DB10
Medium-Voltage, Gas-Insulated Arc-Resistant Switchgear Types 8DA10 & 8DB10
TMEIC MVG 2 Medium Voltage Drive up to 19,500 KVA at 11 kv
TMEIC MVG 2 Medium Voltage Drive up to 19,500 KVA at 11 kv
Unit v conventional and solid state speed control of ac drives
Unit v conventional and solid state speed control of ac drives
Recently uploaded
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Operating System Used by Users in day-to-day life.pptx
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Recently uploaded (20)
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Operating System Used by Users in day-to-day life.pptx
Operating System Used by Users in day-to-day life.pptx
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Ampair 3kW - technical specifications
- 1. Ampair® 3 kW wind turbine TECHNICAL SPECIFICATIONS Variant of an MCS certified product Generates power continuously from 3 m/s Simple robust design Suitable for coastal locations Multiple tower options Models for grid connection, battery charging, or direct heating Photo courtesy Adrian Sargent, owner of an Ampair 3 kW used for 48V battery charging offgrid in Cornwall, UK since 2000.
- 2. Ampair® 3 kW wind turbine Tower options: Base hinged tilting monopoles with hydraulic raise/lower: 9 m (30 ft), 12m (39 ft), 15 m (49 ft) Base hinged tilting monopoles with ginpole winch raise/lower: 9 m (30 ft), 12m (39 ft), 15 m (49 ft) Guyed tubular with ginpole winch: 18m, 24m, 30m Guyed lattice: 18.5m (60 ft) Technical Specifications Reference Power 2.0 kW at 11.0 m/s (24.6 mph) Maximum Power 3.25 kW at 15.5 m/s (35 mph) Annual Energy Prod’n 3,424 kWh at 5m/s (11.2 mph) (per IEC, MCS, AWEA, RUK standards) Rotor Diameter 3.6 m (11.8 ft) Rotor Swept Area 10.17 m2 (110 ft2) Weight 210 kg (463 lb) for nacelle + blades Type Upwind 3-bladed HAWT Control Passive side-furling and current limiting reactor (choke) with PWM dump load Direction of Rotation Clockwise looking downwind Blades 3 fibreglass reinforced composite Rotor Speed Range Design operating 520rpm at 14m/s; maximum 1435 rpm Sound Power Level Not tested Generator Permanent magnet brushless Gearbox None (direct drive) Yaw Control Passive AC Grid Feeding Inverter connection for: single phase 220-240V; 50 or 60Hz DC Battery Charging 24 Vdc and 48 Vdc and 120 Vdc Heating Option With grid feed model or stand-alone Braking System Manually activated furling cable plus dump load and electrical shorting brake Cut-in Wind Speed 3.0 m/s (6.7 mph) Reference Wind Speed 11.0 m/s (24.6 mph) Cut-out Wind Speed None – continuous generation to survival wind speed Survival Wind Speed n/a - variant of the 6kW model which is tested for IEC class I: Vref (10-min avg) 50 m/s (112 mph) Ve50 (3-sec gust) 70 m/s (156 mph) Manufactured In the UK by Ampair Introduced 1997 Certification n/a - variant of the 6kW model with MCS certification by BRE (per IEC 61400-2; -12-1; -14) Warranty 5 years per Ampair Terms & Conditions Ampair 3A Carmavy Road, Crumlin Co Antrim, BT29 4TF, UK T. +44 (0) 028 9445 2437 W. www.ampair.com E. sales@ampair.com Performance data from Venco, Australia, 2003 WWCD-3016 Rev 1.0 20/07/2014