UVITEX NFW 450% is a fluorescent whitening agent powder for textiles. It provides a slightly violet white shade and has high affinity for polyamide, wool, and silk fibers. It can be used in exhaust and continuous processing and provides excellent build-up and a very high brilliant white effect. It has good stability when used with reducing agents and hydrogen peroxide during bleaching.

1. Textile Effects
Technical Data Sheet
UVITEX®
NFW 450% textile whitener
FLUORESCENT WHITENING AGENTS FOR TEXTILES
USES
Fluorescent whitening agent with slightly violet white shade for polyamide, wool, silk, cellulosic
fibers and their blends in all stages of processing.
Versatile application by exhaust and continuous processes.
Characteristics Benefits
• High affinity for polyamide, wool and silk;
excellent build-up.
• Very high and brilliant white maximum.
• Low to moderate affinity for
cellulosic fibers.
• Very good levelness from end to end in
continuous processes.
Outstanding leveling properties in exhaust
and wash-whitening process.
• Very good stability to reducing agents
and hydrogen peroxide.
• Discontinuous reductive or oxidative
bleaching can be carried out
simultaneously with the whitening process.
Suitable for incorporation in print pastes
for white discharges.

2. Technical Data Sheet UVITEX
®
NFW 450% textile whitener
7200065e 2/8
PROPERTIES
Chemical constitution Distyryl biphenyl derivative
Ionic character Anionic
Physical form Yellow powder
Storage stability UVITEX
®
NFW 450% is stable for 5 years when properly
stored in closed containers at 20°C.
pH stability * pH 1–12
Hard water Not stable
Peroxide bleach Very good stability
Reduction bleach
(sodium dithionite)
Very good stability
Chlorite bleach Not stable
Chlorine bleach Not stable
Ecology/toxicology The usual hygiene and safety rules for handling chemicals
should be observed in storage, handling and use. The
product must not be swallowed.
For further information, please consult existing safety
data sheet.
* in soft and demineralized water.

3. Technical Data Sheet UVITEX
®
NFW 450% textile whitener
7200065e 3/8
FASTNESS PROPERTIES
PA WO, S CEL
Light ISO 105-B02 4 2–3 3–4
Washing 40°C ISO 105-C06/A1S 5 5 5
60°C ISO 105-C06/C1S 4–5 – 4
95°C ISO 105-C06/E2S 3–4 – 3
Chlorine bleach mild ISO 105-N01 – – 5
severe – – 4–5
Chlorinated-/Sea water ISO 105-E03/E02 5 – 5
Chlorite bleach mild ISO 105-N03 1 – 1
Alkali ISO 105-E06 – – 5
Acid ISO 105-E05 5 5 5
Perspiration alkaline ISO 105-E04 4–5 4 5
acid 4–5 4 5
Dry heat 30 s/180°C ISO 105-P01 5 – 5
Nitrogen oxides 1 cycle ISO 105-G04 5 – 5
2 cycles 5 – 4–5
Burnt gas fumes 1 cycle ISO 105-G02 5 – 4–5
2 cycles 5 – 4–5
Ozone 1 cycle ISO 105-G03 5 – 4–5
2 cycles 4–5 – 3–4

4. Technical Data Sheet UVITEX
®
NFW 450% textile whitener
7200065e 4/8
APPLICATIONS
UVITEX
®
NFW 450% must be applied from soft water or in presence of a suitable complexing
agent.
Polyamide, wool, silk
Exhaust process: From slightly acid baths, preferably in presence of
stabilized sodium dithionite; can also be applied in a
weakly acid peroxide bleaching bath.
Continuous process: Pad-bake, pad-steam, acid shock or wash-whitening processes.
Cellulosic fibers
Exhaust process: From water with addition of electrolytes.
In the peroxide and reduction bleach.
Continuous process: By padding and in wash-whitening process.
Dissolving/diluting
Dissolve by pouring on hot water. Boil up briefly with live steam if necessary.
Solubility:
at the boil 250 g/l
in cooled liquor 65 g/l
Stock solutions should be kept away from the light; also substrates treated with the whitening
agent, as long as it is not fixed.
Required amount UVITEX
®
NFW 450%
PA
Exhaustion 0.1–0.45%
Pad-bake, Pad-steam,
Acid shock
liquor pick up 80–100%
1–4.5 g/l
Wash-whitening 0.2–1 g/l
WO, S
Exhaustion 0.1–0.45%
CEL
Exhaustion 0.05–0.15%
Padding
liquor pick up about 70%
0.5–1.5 g/l

5. Technical Data Sheet UVITEX
®
NFW 450% textile whitener
7200065e 5/8
Suggested recipes- polyamide
Exhaust process
0.1–0.45 % UVITEX
®
NFW 450%
0–3 g/l sodium dithionite, stabilized
1–2 g/l INVATEX
®
CS
0.5–1 g/l INVADINE
®
DA or ULTRAVON
®
EL
pH 4–5 (with acetic or citric acid)
Liquor ratio 10 : 1–20 : 1
Temperature range 120–90°C
Treatment time 20–60 min
The pH can also be set at 4–5 by using 2 g/l ALBATEX®
AB-45 as a buffer.
A final neutralization of the residues of reducing agent (with approx . 0.5 ml/l hydrogen peroxide 35%) is
recommended to avoid unpleasant odour and yellowing during subsequent drying.
The addition of 2–3% STABILON®
CT can be recommended to protect white goods against storage yellowing
caused by the adsorption of phenolic antioxidants present in packaging materials.
Additionally, the final pH of the substrate s hould be slightly acid (pH 5–6) withe.g. INVATEX®
AC.
Continuous process
Pad-bake
1–4.5 g/l UVITEX
®
NFW 450%
1–3 g/l INVALON
®
NA
1–2 g/l polyphosphate
5–10 g/l polyethylene glycol 400–600
pH 4–5 (with acetic, preferably tartaric or citric acid)
Padding liquor pick-up 60–80%, cold
Drying
Baking/developing 15–30 s at 180–190°C
Pad-steam
1–4.5 g/l UVITEX®
NFW 450%
1–3 g/l INVALON
®
NA
1–2 g/l INVATEX
®
CS
5–10 g/l sodium dithionite, stabilized (if necessary)
pH about 4–5 (with acetic, preferably tartaric of citric acid)
Padding liquor pick-up 60–80%, cold
Steaming 2–30 min (saturated conditions)

6. Technical Data Sheet UVITEX
®
NFW 450% textile whitener
7200065e 6/8
Suggested recipes - wool, silk
Exhaust process
Wool and silk are preferably fluorescent whitened in the reduction bleaching bath following a
first bleach with peroxide:
0.1–0.45 % UVITEX
®
NFW 450%
1–5 g/l sodium dithionite, stabilized
0–1 g/l INVADINE®
DA
1–2 g/l INVATEX
®
CS
pH 5 (with acetic acid)
Liquor ratio 10 : 1–30 : 1
Temperature range 50–60°C (wool) or 60–70°C (silk)
Treatment time 60–120 min
A final neutralization of the residues of reducing agent (with approx . 0.5 ml/l hydrogen peroxide 35%) is
recommended to avoid unpleasant odour and yellowing during subsequent drying.
Suggested recipes - cellulosic fibers
Exhaust process
The affinity of UVITEX
®
NFW 450% depends on the temperature and electrolyte
content. UVITEX
®
NFW 450% can be applied in combination with the peroxide bleach.
0.05–0.15 % UVITEX
®
NFW 450%
2–5 g/l Glauber’s salt, anhyd.
8–14 ml/l hydrogen peroxide 35%
2–4 g/l CLARITE
®
WIN
1.5–3 g/l sodium hydroxide 100%
Liquor ratio 5 : 1–20 : 1
Temperature range/ time - without bleach: 40–80°C/15–30 min
- with bleach: 95–80°C/40–60 min
If the goods are rinsed at high temperatures after bleaching, an electrolyte addition is recommended.
UVITEX®
NFW 450% can also be applied in presence of reducing bleaching agents (stabilized sodium dithionite).
Acid cracking prior to bleach-whitening may improve the whiteness level and reduce damages of cellulosic fibers
during bleaching process.
The amount of bleaching chemicals should be reduced in case of regenerated cellulose fibers.
In the case of yarn package and beam whitening, CLARITE®
WIN should not be used and replaced by CLARITE®
GS
(0.5–1.5 g/l) together with INVADINE®
DA (0.5–1 g/l).

7. Technical Data Sheet UVITEX
®
NFW 450% textile whitener
7200065e 7/8
Soft handle finish
0.5–1.5 g/l UVITEX
®
NFW 450%
20–40 g/l ULTRATEX
®
FMW
Padding liquor pick-up 60–90%
Drying 110–130°C
Brightening pastel shades
The brightness of pastel shades can be improved in dyeing with
0.02–0.1 % UVITEX
®
NFW 450%
White discharges
White discharges are usually produced with
0.2–1 g/kg UVITEX
®
NFW 450%
Preliminary trials should be carried out owing to the widely different formulations of the
print pastes used.
Leveling/stripping
1–2 g/l ALBEGAL®
W
Temperature/time 20–60 min at 60–90°C
To freshen up the whiteness and avoid subsequent yellowing, hydrogen peroxide
(especially with cellulosic goods) or stabilized sodium dithionite should be added.
Re-whitening can be carried out with UVITEX
®
NFW 450% or other products in the
UVITEX
®
range which are suitable for cellulosic or polyamide fibers, wool and silk.
UVITEX
®
NFW 450% can be radically stripped from cellulosic and polyamide goods using
a sodium chlorite bleach.

8. Technical Data Sheet UVITEX
®
NFW 450% textile whitener
7200065e 8/8
Region Europe
Huntsman Textile Effects (Germany) GmbH
Rehlinger Str. 1
86462 Langweid a. Lech, Germany
infotexeurope@huntsman.com
Tel: +49 8230 41-0
Fax: +49 8230 41-370
Region Americas
Huntsman International LLC
Textile Effects
4050 Premier Drive
USA-High Point, North Carolina 27265
infotexamericas@huntsman.com
Tel: +1 800 822 1736
Fax: +1 336 801 2808
Region Asia
Huntsman (Guangdong) Ltd.
Textile Effects
Flying Geese Mountain Industrial Park
Shilou Town, Panyu District, Guangzhou
511447, PR China
infotexasia@huntsman.com
Tel: +86 20 8484 5100
Fax: +86 20 8484 5222
Copyright © 2007 Huntsman. All rights reserved.
All trademarks mentioned are either property of or licensed to
Huntsman Corporation or an affiliate thereof in one or more, but not
all countries.
IMPORTANT: The following supersedes Buyer’s documents. Sales
of the product described herein (“Product”) are subject to the general
terms and conditions of sale of either Huntsman Advanced Materials
LLC, or its appropriate affiliate. Huntsman warrants that at the time
and place of del ivery all Products sold to Buyer shall conform to the
specifications provided to Buyer by Huntsman.
While the information and recommendations included in this
publication are, to the best of Huntsman’s knowledge, accurate as of
the date of publication, NOTHING CONTAINED HEREIN (EXCEPT
AS SET FORTH ABOVE REGARDING CONFORMANCE WITH
SPECIFICATIONS PROVIDED TO BUYER BY HUNTSMAN) IS TO
BE CONSTRUED AS A REPRESENTATION OR WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT
OF ANY INTELLECTUAL PROPERTY RIGHTS, OR WARRANTIES
AS TO QUALITY OR CORRESPONDENCE WITH PRIOR
DESCRIPTION OR SAMPLE, AND THE BUYER ASSUMES ALL
RISK AND LIABILITY WHATSOEVER RESULTING FROM THE
USE OF SUCH PRODUCT, WHETHER USED SINGLY OR IN
COMBINATION WITH OTHER SUBSTANCES.
No statements or recommendations made herein are to be construed
as a representation about the suitability of any Product for the
particular application of Buyer or user or as an inducement to infringe
any patent or other intellectual property right. Buyer is responsible to
determine the applicability of such information and recommendations
and the suitability of any Product for its own particular purpose, and
to ensure that its intended use of the Product does not infringe any
intellectual property rights.
The Product may be or become hazardous. The Buyer should obtain
Material Safety Data Sheets and Technical Data Sheets from
Huntsman containing detailed information on Product hazards and
toxicity, together with proper shipping, handling and storage
procedures for the Product, and should comply with all applicable
governmental laws, regulations and standards relating to the
handling, use, storage, distribution and disposal of, and exposure to
the Product. Buyer shall also take all steps necessary to adequately
inform, warn and familiarize its employees, agents, direct and indirect
customers and contractors who may handle or be exposed to the
Product of all hazards pertaining to and proper procedures for safe
handling, use, storage, transportation and disposal of and exposure
to the Product, and the containers or equipment in which the Product
may be handled, shipped or stored.
Please note that products may differ from country to country. If you
have any queries, kindly contact your local Huntsman representative.
7200065e—April-07, Printed in Switzerland.
www.huntsman.com/textile_effects