Poly-Optic® 14-Series Casting Resins are two-part,
polyurethane systems formulated specifically for applications where
optical clarity is required. Castings are clear like water; however,
PolyColor dyes can be added to obtain clear, colored castings. PolyOptic systems, with low viscosities and long pot-lives, provide for easy
mixing, excellent detail penetration, and easy degassing, through
vacuum or pressure casting techniques, for bubble-free castings.
Poly-Optic® 14-Series Casting Resins are two-part,
polyurethane systems formulated specifically for applications where
optical clarity is required. Castings are clear like water; however,
PolyColor dyes can be added to obtain clear, colored castings. PolyOptic systems, with low viscosities and long pot-lives, provide for easy
mixing, excellent detail penetration, and easy degassing, through
vacuum or pressure casting techniques, for bubble-free castings.
PT Flex products are two-component, fast-setting
polyurethane rubbers that cure at room temperature (RTV). Available
in a variety of hardnesses, these products are excellent for prototyping
and model making applications and for the casting of production parts,
props, tools, and more.
Use Poly 81-Series rubbers to make firm molds, mold
facings, stamping tools, industrial parts, rollers, gaskets, mold shells,
bumpers or pads. Poly 81-Series rubbers consist of two liquid parts (A
and B), which, after mixing, cure at room temperature to tough, durable
rubbers. They offer low sensitivity to moisture, and low viscosity for easy
mixing and pouring.
: FormRub Series Liquid Rubbers consist of two parts (A
and B), which, after mixing, cure at room temperature to flexible rubber.
Molds made with FormRub are excellent for casting concrete, plaster
and wax. In addition, when coated with a proper release agent, FormRub
molds can be used to cast various resins and foams. FormRub Liquid
Rubbers are formulated for good economy with high performance and
durability
Poly 74-Series Polyurethane Rubbers consist of two
parts (A and B), which, after mixing, cure at room temperature to
flexible, high-strength, mold rubbers. Poly 74-Series Rubbers make
durable, easy-releasing molds for casting plasters and waxes without
release agents. When Poly 74-Series molds are properly prepared, they
are also excellent for casting concrete and various resins, such as epoxy,
polyester, polyurethane and acrylic
TinSil® 70-Series Silicone Elastomers are two-component,
room temperature curing mold rubbers. TinSil silicone elastomers are
condensation-cure, tin-catalyzed systems that cure to flexible rubbers.
TinSil molds have high tear strength, excellent chemical resistance,
good release properties and resistance to high temperatures. These
molds are a great choice for casting polyesters, epoxy and polyurethane
resins, polyurethane foams, plaster, waxes and many other materials.
TinSil® 70-Series Silicone Elastomers are two-component,
room temperature curing mold rubbers. TinSil silicone elastomers are
condensation-cure, tin-catalyzed systems that cure to flexible rubbers.
TinSil molds have high tear strength, excellent chemical resistance,
good release properties and resistance to high temperatures. These
molds are a great choice for casting polyesters, epoxy and polyurethane
resins, polyurethane foams, plaster, waxes and many other materials.
Polygel® Liquid Rubbers are without equal for making
brush-on or sprayed blanket molds. Polygel products consist of two
parts (A and B) that immediately thicken to a brushable or trowellable
consistency after mixing. These non-sag products are especially
useful for application to vertical or overhead surfaces. For brush-on
application, use Polygel 35. In circumstances where spray application
is best (e.g., large surface areas where brushing may be impractical),
use Polygel Spray 35 or Spray 50. Polygel rubber molds are suitable
for casting plaster, concrete and waxes, as well as limited casting with
polyester, epoxy and polyurethane resins. Since Polygel products bond
well to many surfaces, they can also be used as adhesives and sealants.
Poly-Optic® 14-Series Casting Resins are two-part,
polyurethane systems formulated specifically for applications where
optical clarity is required. Castings are clear like water; however,
PolyColor dyes can be added to obtain clear, colored castings. PolyOptic systems, with low viscosities and long pot-lives, provide for easy
mixing, excellent detail penetration, and easy degassing, through
vacuum or pressure casting techniques, for bubble-free castings.
PT Flex products are two-component, fast-setting
polyurethane rubbers that cure at room temperature (RTV). Available
in a variety of hardnesses, these products are excellent for prototyping
and model making applications and for the casting of production parts,
props, tools, and more.
Use Poly 81-Series rubbers to make firm molds, mold
facings, stamping tools, industrial parts, rollers, gaskets, mold shells,
bumpers or pads. Poly 81-Series rubbers consist of two liquid parts (A
and B), which, after mixing, cure at room temperature to tough, durable
rubbers. They offer low sensitivity to moisture, and low viscosity for easy
mixing and pouring.
: FormRub Series Liquid Rubbers consist of two parts (A
and B), which, after mixing, cure at room temperature to flexible rubber.
Molds made with FormRub are excellent for casting concrete, plaster
and wax. In addition, when coated with a proper release agent, FormRub
molds can be used to cast various resins and foams. FormRub Liquid
Rubbers are formulated for good economy with high performance and
durability
Poly 74-Series Polyurethane Rubbers consist of two
parts (A and B), which, after mixing, cure at room temperature to
flexible, high-strength, mold rubbers. Poly 74-Series Rubbers make
durable, easy-releasing molds for casting plasters and waxes without
release agents. When Poly 74-Series molds are properly prepared, they
are also excellent for casting concrete and various resins, such as epoxy,
polyester, polyurethane and acrylic
TinSil® 70-Series Silicone Elastomers are two-component,
room temperature curing mold rubbers. TinSil silicone elastomers are
condensation-cure, tin-catalyzed systems that cure to flexible rubbers.
TinSil molds have high tear strength, excellent chemical resistance,
good release properties and resistance to high temperatures. These
molds are a great choice for casting polyesters, epoxy and polyurethane
resins, polyurethane foams, plaster, waxes and many other materials.
TinSil® 70-Series Silicone Elastomers are two-component,
room temperature curing mold rubbers. TinSil silicone elastomers are
condensation-cure, tin-catalyzed systems that cure to flexible rubbers.
TinSil molds have high tear strength, excellent chemical resistance,
good release properties and resistance to high temperatures. These
molds are a great choice for casting polyesters, epoxy and polyurethane
resins, polyurethane foams, plaster, waxes and many other materials.
Polygel® Liquid Rubbers are without equal for making
brush-on or sprayed blanket molds. Polygel products consist of two
parts (A and B) that immediately thicken to a brushable or trowellable
consistency after mixing. These non-sag products are especially
useful for application to vertical or overhead surfaces. For brush-on
application, use Polygel 35. In circumstances where spray application
is best (e.g., large surface areas where brushing may be impractical),
use Polygel Spray 35 or Spray 50. Polygel rubber molds are suitable
for casting plaster, concrete and waxes, as well as limited casting with
polyester, epoxy and polyurethane resins. Since Polygel products bond
well to many surfaces, they can also be used as adhesives and sealants.
PolyPoxy® Casting Epoxies are pourable, aluminumfilled, heat-resistant, room temperature curing (RTV) systems that are
typically used for heat-resistant tooling, vacuum form tools, injection
and compression molds, RTM and RIM molds, and matched dies.
Poly GlassRub 50 Liquid Rubber consists of two parts (A
and B) that, after mixing, cure at room temperature to a flexible, clear
rubber. The transparency of Poly GlassRub 50 allows the mold maker
to see if air bubbles are trapped against the master or forming in the
casting. Additionally, clear rubber castings or objects encapsulated in
clear rubber make interesting displays or original art. Cured GlassRub
may yellow slightly over time or following UV exposure. PolyColor dyes
can be added to the liquid rubber to make a tinted or colored, yet still
clear, rubber.
Poly 15-Series Liquid Plastics are excellent for casting
decorative objects, production parts, tools, models, patterns, fixtures,
duplicate masters, mold shells and more.
Polytek Moisture Sealing Epoxy Primer is a two-component, 100% solids, low viscosity, moisture
accepting epoxy primer. It can reduce the hydrostatic pressure mitted by the floor from 12 lbs per 1000 square feet to less
than 1 lb. Polytek Moisture Seal can even cure underwater without affecting its adhesion. When applied at 73°F / 50%
humidity, Moisture Seal is a 6–7-hour cure.
(www.indiamart.com/flosilbetcoatings) Our products are versatile in catering to premium, mid-range and economical applications without SA 2.5 surface preparation. To cater to the customers across India on an effective and faster timeline, to establish the long term relationship with the existing customers and to develop new customers we are looking for exuberant dealers and distributors on a long term basis.
Poly Plasti-Flex Liquid Plastic is a two part, room
temperature curing (RTV) polyurethane plastic that is slightly flexible
upon cure. The flexibility of this plastic makes it ideal for parts such as
decorative trim molding, props, special effects castings, and impactresistant items.
PolyFoam Series casting foams consist of two parts
(A and B) that, after mixing, form rigid or flexible foam products with
densities in the range of 3 to 20 lb/ft³. PolyFoam R-2, R-5 and R-8 are rigid
foams. PolyFoam F-3 and F-5 are flexible for casting soft parts. Consider
PolyFoams for production of decorative objects, lightweight mold
shells, production parts, models, patterns, fixtures, duplicate masters
and general tooling use. PolyFoam systems are practically odorless and
do not contain toluene diisocyanate, MOCA, heavy metals or HCFCs
Kast Series products are high-performance, fast-cast
urethane tooling and casting systems that are designed for use in a
variety of applications including foundry, special effects, prototyping,
vacuum and thermo-forming, and many other industrial and commercial
applications.
Kast products were developed to provide greater moisture resistance,
improved filler suspension, easier premixing of the components, and
minimal shrinkage.
Slo-Kast provides a longer pot life and demold time for larger pours,
while Metal-Kast simulates many of the desirable characteristics of
aluminum metal
EasyFlo Series Liquid Plastics are excellent for casting
decorative objects, sculpture reproductions, production parts, tools,
models, duplicate masters and more. EasyFlo products are mercury-free
systems that consist of two parts (A and B) that, after mixing, quickly
cure to tough polyurethane plastics. Since Parts A and B are very low
in viscosity, they are easy to mix, provide excellent detail penetration,
and make bubble-free castings without vacuum degassing or pressure
casting techniques.
PolyPoxy® Epoxy Clays are two-component, room
temperature curing (RTV) systems. When mixed together, these
components form a soft, dough-like consistency that ultimately cures
to a hard solid with excellent toughness and dimensional stability. The
gray Resin and a colored Hardener of PolyPoxy® epoxy clays provide
visual assistance to help obtain thorough mixing. Cured epoxy clay can
be machined or carved with common wood working tools.
PolyPoxy® Laminating Epoxies are low viscosity, room
temperature curing (RTV) systems formulated for general purpose and
high-temperature fabrication applications. These room temperature
curing systems should be used with reinforcement materials such as
fiberglass, carbon fiber, and other materials for lay-up mold making and
master production applications
Poly 74-Series Polyurethane Rubbers consist of two
parts (A and B), which, after mixing, cure at room temperature to
flexible, high-strength, mold rubbers. Poly 74-Series Rubbers make
durable, easy-releasing molds for casting plasters and waxes without
release agents. When Poly 74-Series molds are properly prepared, they
are also excellent for casting concrete and various resins, such as epoxy,
polyester, polyurethane and acrylic.
PolyPoxy® Epoxy Clays are two-component, room
temperature curing (RTV) systems. When mixed together, these
components form a soft, dough-like consistency that ultimately cures
to a hard solid with excellent toughness and dimensional stability. The
gray Resin and a colored Hardener of PolyPoxy® epoxy clays provide
visual assistance to help obtain thorough mixing. Cured epoxy clay can
be machined or carved with common wood working tools.
PolyPoxy® Epoxy Adhesives are two-component, roomtemperature curing (RTV) systems designed to be used as generalpurpose adhesives as well as a bonding adhesive for TekBoard™ Tooling
& Modeling Board.
Here is a “Polyurethane Datasheet Template “. TDSmaker offer you free Datasheet/ Specsheet/ Techsheet. Visit to ( https://www.tdsmaker.com ) to get start with free template.
http://marispolymers.com/products/waterproofing-systems/inverted-flat-roof-waterproofing/
Inverted flat roof waterproofing combined with a thermal insulation is essential for a buildings waterproofing and energy saving thermal insulation. The MARISEAL SYSTEM® inverted flat roof waterproofing method offers a simple build-up waterproofing, that features a protected waterproofing membrane and loose laying insulation boards.
The inverted waterproofing insulation system is applicable for all types of flat roofs, as it offers an efficient solution for new construction but also for renovation of old flat roofs as is it possible to install an inverted roof over an existing roof build up.
PlatSil® Gels are 1A:1B (by weight or volume) platinumcured silicone systems that can be used as mold rubbers, to create
prosthetic appliances, and for life casting. Polytek offers an array of
accessory products that can be used independently or in concert
to increase working time, accelerate cure time, thicken the mix for
brushing/layering, thin the mix for easier pouring, or soften or harden
the rubber. Smith’s Theatrical Prosthetic Deadener and PlatSil® Deadener
LV can be added to soften and eliminate the snappy, synthetic look and
feel of ordinary silicone rubbers. “Deadened” PlatSil Gels can be made
to look, feel and move like living tissue. Unlike silicone fluid, Deadener
does not leach from the cured rubber/appliance, so bonding and use
are far easier.
PlatSil Gel-OO30 & PlatSil Gel-OO20 are lower in viscosity and are less
tacky on cure compared to PlatSil Gel-OO
PolyPoxy® Casting Epoxies are pourable, aluminumfilled, heat-resistant, room temperature curing (RTV) systems that are
typically used for heat-resistant tooling, vacuum form tools, injection
and compression molds, RTM and RIM molds, and matched dies.
Poly GlassRub 50 Liquid Rubber consists of two parts (A
and B) that, after mixing, cure at room temperature to a flexible, clear
rubber. The transparency of Poly GlassRub 50 allows the mold maker
to see if air bubbles are trapped against the master or forming in the
casting. Additionally, clear rubber castings or objects encapsulated in
clear rubber make interesting displays or original art. Cured GlassRub
may yellow slightly over time or following UV exposure. PolyColor dyes
can be added to the liquid rubber to make a tinted or colored, yet still
clear, rubber.
Poly 15-Series Liquid Plastics are excellent for casting
decorative objects, production parts, tools, models, patterns, fixtures,
duplicate masters, mold shells and more.
Polytek Moisture Sealing Epoxy Primer is a two-component, 100% solids, low viscosity, moisture
accepting epoxy primer. It can reduce the hydrostatic pressure mitted by the floor from 12 lbs per 1000 square feet to less
than 1 lb. Polytek Moisture Seal can even cure underwater without affecting its adhesion. When applied at 73°F / 50%
humidity, Moisture Seal is a 6–7-hour cure.
(www.indiamart.com/flosilbetcoatings) Our products are versatile in catering to premium, mid-range and economical applications without SA 2.5 surface preparation. To cater to the customers across India on an effective and faster timeline, to establish the long term relationship with the existing customers and to develop new customers we are looking for exuberant dealers and distributors on a long term basis.
Poly Plasti-Flex Liquid Plastic is a two part, room
temperature curing (RTV) polyurethane plastic that is slightly flexible
upon cure. The flexibility of this plastic makes it ideal for parts such as
decorative trim molding, props, special effects castings, and impactresistant items.
PolyFoam Series casting foams consist of two parts
(A and B) that, after mixing, form rigid or flexible foam products with
densities in the range of 3 to 20 lb/ft³. PolyFoam R-2, R-5 and R-8 are rigid
foams. PolyFoam F-3 and F-5 are flexible for casting soft parts. Consider
PolyFoams for production of decorative objects, lightweight mold
shells, production parts, models, patterns, fixtures, duplicate masters
and general tooling use. PolyFoam systems are practically odorless and
do not contain toluene diisocyanate, MOCA, heavy metals or HCFCs
Kast Series products are high-performance, fast-cast
urethane tooling and casting systems that are designed for use in a
variety of applications including foundry, special effects, prototyping,
vacuum and thermo-forming, and many other industrial and commercial
applications.
Kast products were developed to provide greater moisture resistance,
improved filler suspension, easier premixing of the components, and
minimal shrinkage.
Slo-Kast provides a longer pot life and demold time for larger pours,
while Metal-Kast simulates many of the desirable characteristics of
aluminum metal
EasyFlo Series Liquid Plastics are excellent for casting
decorative objects, sculpture reproductions, production parts, tools,
models, duplicate masters and more. EasyFlo products are mercury-free
systems that consist of two parts (A and B) that, after mixing, quickly
cure to tough polyurethane plastics. Since Parts A and B are very low
in viscosity, they are easy to mix, provide excellent detail penetration,
and make bubble-free castings without vacuum degassing or pressure
casting techniques.
PolyPoxy® Epoxy Clays are two-component, room
temperature curing (RTV) systems. When mixed together, these
components form a soft, dough-like consistency that ultimately cures
to a hard solid with excellent toughness and dimensional stability. The
gray Resin and a colored Hardener of PolyPoxy® epoxy clays provide
visual assistance to help obtain thorough mixing. Cured epoxy clay can
be machined or carved with common wood working tools.
PolyPoxy® Laminating Epoxies are low viscosity, room
temperature curing (RTV) systems formulated for general purpose and
high-temperature fabrication applications. These room temperature
curing systems should be used with reinforcement materials such as
fiberglass, carbon fiber, and other materials for lay-up mold making and
master production applications
Poly 74-Series Polyurethane Rubbers consist of two
parts (A and B), which, after mixing, cure at room temperature to
flexible, high-strength, mold rubbers. Poly 74-Series Rubbers make
durable, easy-releasing molds for casting plasters and waxes without
release agents. When Poly 74-Series molds are properly prepared, they
are also excellent for casting concrete and various resins, such as epoxy,
polyester, polyurethane and acrylic.
PolyPoxy® Epoxy Clays are two-component, room
temperature curing (RTV) systems. When mixed together, these
components form a soft, dough-like consistency that ultimately cures
to a hard solid with excellent toughness and dimensional stability. The
gray Resin and a colored Hardener of PolyPoxy® epoxy clays provide
visual assistance to help obtain thorough mixing. Cured epoxy clay can
be machined or carved with common wood working tools.
PolyPoxy® Epoxy Adhesives are two-component, roomtemperature curing (RTV) systems designed to be used as generalpurpose adhesives as well as a bonding adhesive for TekBoard™ Tooling
& Modeling Board.
Here is a “Polyurethane Datasheet Template “. TDSmaker offer you free Datasheet/ Specsheet/ Techsheet. Visit to ( https://www.tdsmaker.com ) to get start with free template.
http://marispolymers.com/products/waterproofing-systems/inverted-flat-roof-waterproofing/
Inverted flat roof waterproofing combined with a thermal insulation is essential for a buildings waterproofing and energy saving thermal insulation. The MARISEAL SYSTEM® inverted flat roof waterproofing method offers a simple build-up waterproofing, that features a protected waterproofing membrane and loose laying insulation boards.
The inverted waterproofing insulation system is applicable for all types of flat roofs, as it offers an efficient solution for new construction but also for renovation of old flat roofs as is it possible to install an inverted roof over an existing roof build up.
PlatSil® Gels are 1A:1B (by weight or volume) platinumcured silicone systems that can be used as mold rubbers, to create
prosthetic appliances, and for life casting. Polytek offers an array of
accessory products that can be used independently or in concert
to increase working time, accelerate cure time, thicken the mix for
brushing/layering, thin the mix for easier pouring, or soften or harden
the rubber. Smith’s Theatrical Prosthetic Deadener and PlatSil® Deadener
LV can be added to soften and eliminate the snappy, synthetic look and
feel of ordinary silicone rubbers. “Deadened” PlatSil Gels can be made
to look, feel and move like living tissue. Unlike silicone fluid, Deadener
does not leach from the cured rubber/appliance, so bonding and use
are far easier.
PlatSil Gel-OO30 & PlatSil Gel-OO20 are lower in viscosity and are less
tacky on cure compared to PlatSil Gel-OO
• All Purpose Quick Cure Epoxy Paste
• Hardens in 5– 15 minutes depending on ambient temperature (down to 38°F)
• Ideal for immediate field use repairs
• Trowellable - ideal for vertical surface repairs
• Self-priming - bonds chemically and mechanically to the substrate
• Can be sanded, drilled, tapped and machined
• 100% solids - No VOCs
Sparkle Ortho Jet - Lang Dental Manufacturing, Co.langdental
Sparkle powder used with Contemporary Ortho-Jet liquid: Provides your patients the ability to express their “inner diva” by adding a sparkle factor for their application.
For your orders contact Lang Dental Manufacturing Co., Inc.
Address: 175 Messner Drive
Wheeling, IL 60090
Phone: (800) 222-5264/(847) 215-6622
Fax: (847) 215-6678/(866) 278-8510
Site: http://www.langdental.com/
Twitter: https://twitter.com/#!/LangDental
Facebook: http://www.facebook.com/pages/Lang-Dental-Mfg-Co-Inc/17884048549682
Similar to Poly-Optic® 14-Series Casting Resins (19)
Polytek’s Ultimate Top Coat is a two-component, high solids, water-based, aliphatic polyurethane. The
excellent UV resistant, mar-resistant, chemical resistant nature of this product will cause it to outperform most other types of
sealers or topcoats without the unwanted smell of solvents. Ultimate Top Coat comes in both a high-gloss and satin-gloss
finish
Product Identifier: TinSil®
70-10 Silicone Rubber Part A
TinSil®
70-11 Silicone Rubber Part A
TinSil® Gel-10 Silicone Rubber Part A
TinSil®
Spray 25 Silicone Rubber Part A
Product Code(s): 7010A, 7011A, TINGEL10A, TINSPRAY25A
Use: Component for silicone mold rubber. For
Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
Product Identifier: PlatSil®
SiliFoam Part A
PlatSil®
SiliFoam Part B
Product Code(s): SILIFOAMA, SILIFOAMB
Use: Liquid component for silicone foam. For
Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
Product Identifier: PT Flex D60 Casting Resin Part A
Product Code(s): PTFLEXD60A
Use: Component for Polyurethane Casting Resin. For
Industrial/Professional use only. Not for spray
application.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
Product Identifier: PT Flex D60 Casting Resin Part A
Product Code(s): PTFLEXD60A
Use: Component for Polyurethane Casting Resin. For
Industrial/Professional use only. Not for spray
application.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (9 a.m. to 5 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
Polytek’s Ultimate Top Coat is a two-component, high solids, water-based, aliphatic polyurethane. The
excellent UV resistant, mar-resistant, chemical resistant nature of this product will cause it to outperform most other types of
sealers or topcoats without the unwanted smell of solvents. Ultimate Top Coat comes in both a high-gloss and satin-gloss
finish
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Explore our most comprehensive guide on lookback analysis at SafePaaS, covering access governance and how it can transform modern ERP audits. Browse now!
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Search Disrupted Google’s Leaked Documents Rock the SEO World.pdf
Poly-Optic® 14-Series Casting Resins
1. DESCRIPTION: Poly-Optic® 14-Series Casting Resins are two-part,
polyurethane systems formulated specifically for applications where
optical clarity is required. Castings are clear like water; however,
PolyColor dyes can be added to obtain clear, colored castings. Poly-
Optic systems, with low viscosities and long pot-lives, provide for easy
mixing, excellent detail penetration, and easy degassing, through
vacuum or pressure casting techniques, for bubble-free castings.
BEFORE USE: Thoroughly read Safety Data Sheets, product labels
and the“SAFETY”section in this Technical Bulletin.
Choose the Poly-Optic® product that’s best for your application:
Poly-Optic® 1410 cures to a hard, virtually unbreakable, plastic.Cure
1410 at room temperature and, for optimum physical properties, post
cure at 150°F.
Poly-Optic® 1411 is an easy 1A:1B, by volume, system that cures
quickly to a super-strong, hard plastic. 1411 develops hardness
and can be demolded more quickly than 1410. It also has a higher
heat deflection temperature, which is useful in certain prototyping
applications.
Poly-Optic® 1411 ES7 a long pot-life (~7 hr) version of 1411, is used
for large pours where extra working time or minimal shrinkage is
required. 1411 ES7 Part B can be blended with 1411 Part B to shorten
pot-life.
Poly-Optic® 14-Series Casting Resins Technical Bulletin
55 Hilton Street, Easton, PA 18042 | 800.858.5990 | 610.559.8620 | Fax 610.559.8626 | www.polytek.com | sales@polytek.com
Poly-Optic® 1412 is a high-strength, heat-resistant, fast-curing,
rapid-prototyping plastic designed for casting in heated molds.
Poly-Optic® 1420 cures to a tough, impact- and heat-resistant plastic
that can be polished and machined. For strong plastic, heat cure 1420
at 150-180°F. For brittle, glass-like castings, cure at room temperature.
Poly-Optic® 14-70 is a firm rubber. Blend 1410 and 14-70 to achieve
any hardness between Shore D85 and Shore A70.
Poly-Optic® 1490 is a mercury-free formula with an easy 1A:1B mix
ratio by volume (100A:90B by weight). Must be pressure cast or used
with vacuum casting equipment (not degassing).
- Crystal clear
- Reproduces fine detail
- Can be machined, drilled and sanded
- Tough and hard, but not brittle
- Long working time
- Low shrinkage upon cure
PHYSICAL PROPERTIES
Product
Poly-Optic®
1410
Poly-Optic®
1411
Poly-Optic®
1411 ES7
Poly-Optic®
1412
Poly-Optic® 1420
Poly-Optic®
14-70
Poly-Optic®
1490^
Mix Ratio by Volume N/A 1A:1B 1A:1B 1A:1B N/A N/A 1A:1B
Mix Ratio by Weight 3A:2B 100A:90B 100A:90B 1A:1B 2A:1B 4A:5B 100A:90B
Shore Hardness D80 D80 D80 D80 D85 A70 D80
Pot Life (1-lb mix) 15 min. 9 min. 420 min. 8 min. 15 min. 15 min. 9 min.
Demold Time* @ 73°F
unless otherwise noted
2 hr. (1”thick)
30 min.
(0.5”thick)
48-96 hr.
30 min.
@ 175°F
8 hr. @ 150°F
30 min. @ 175°F
24-48 hr. 1 hr.
Cured Color Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear
Mixed Viscosity (cP) 700 600 600 750 250 340 690
Specific Volume (in3
/lb) 25.8 25.8 25.8 25.8 26.3 26.1 25.8
Specific Gravity 1.07 1.07 1.07 1.07 1.05 1.06 1.07
Linear Shrinkage (in/in) ND 0.0018 N/A 0.0019 ND 0.0016 N/A
Elongation (%) 27 7 N/A 11.1 5.3 234 12
Max Exotherm (°F) 265 228 140 235 311 190 235
Heat Deflection Temp. (°F) 100 138 N/A 227 168 N/A N/A
Tensile Strength (psi) 4,566 6,083 N/A 9,825 7,900 564 8,740
Elastic Modulus (psi) 96,830 133,956 N/A 179,886 171,500 N/A 128,800
Flexural Modulus (psi) 144,158 250,992 N/A 295,101 250,000 N/A 282,600
Flexural Strength, 5% Strain
(psi)
4,893 8,478 N/A 12,261 12,600 N/A 10,800
*Demold time varies with thickness of casting and the amount of accelerator used. ^Poly-Optic 1490 must be pressure cast or used with vacuum casting equipment
(not degassing).
PRODUCT LINE FEATURES
2. RETARDING CURE SPEED: Poly-Optic® 14 Part R Retarder slows the
cure of Poly-Optic systems. Slowing the cure also reduces exothermic
heating, which can cause distortion, waviness and shrinkage especially
in castings >½-inch thick. For every part of Part R added, an equal part of
Part A must be added to the mix. Add 1.5% Part R to the total mix weight
of 1410 to increase the pot-life from 15 to 70 minutes. Add 1% Part R to
1411 to double the working time from 9 to 18 minutes. Depending on
the size and mass of the part, post curing 14-70 and 1410 parts in the
mold at >140°F for 12 to 16 hours may be necessary. The extended pot-
life creates a lower exotherm upon curing, allowing larger castings to
be made without distortion. Never use more than 4% Part R since the
system may not cure properly. For larger castings, consider Poly-Optic
1411 ES7 with a 7-hour pot-life and low exotherm.
COLORS: Add PolyColors to 14-Series Part B before mixing with Part A
to create clear plastics of any color.
EXTERIOR USES: Although Poly-Optic 1410, 1411, 1411 ES7, 1412, 1420
and 1490 are non-yellowing formulas, they are not recommended for
long-term exterior use. To improve durability for exterior applications,
add 1% Poly UV Additive to the total mix weight of Poly-Optic to reduce
the onset of chalking and pitting of the outside surface for ~2 years. Add
3% Poly UV Additive to achieve good exterior stability beyond 5 years.
CLEAN UP: Tools should be wiped clean before the plastic is hard.
Denatured ethanol is a good cleaning solvent, but it must be handled
with extreme caution owing to its flammability and health hazards.
Work surfaces can be waxed or coated with Pol-Ease 2300 Release
Agent so cured rubber can be removed.
SAFETY: Before use, thoroughly read Safety Data Sheets and product
labels. Follow safety precautions and directions.
Part A: Keep out of reach of children. Avoid breathing fumes, vapors,
mists, or spray. Use only outdoors or with adequate general or local
exhaust ventilation to minimize exposure levels. If needed, a NIOSH-
approvedrespiratorwithorganicvaporcartridgemaybeused.Ifinhaled,
remove victim to fresh air and keep at rest in a position comfortable for
breathing. If experiencing respiratory irritation, get medical attention.
Wear impervious gloves, such as butyl rubber or nitrile rubber. Wash
contaminated clothing before reuse. Wash skin thoroughly with soap
and water after handling. If skin irritation or rash occurs, get medical
attention.Wear eye protection, such as chemical safety glasses/googles.
If in eyes, rinse cautiously with water for several minutes, removing
contact lenses if present and easy to do. Store in a well-ventilated place
and keep container tightly closed.
Part B: Keep out of reach of children. Do not breathe fumes or vapors.
Use with adequate general or local exhaust ventilation to minimize
exposure levels. If needed, a NIOSH-approved respirator with organic
vapor cartridge may be used. If inhaled, remove victim to fresh air and
keep at rest in a position comfortable for breathing. Wear impervious
gloves, such as butyl rubber or nitrile rubber. Wash skin thoroughly with
soap and water after handling. Wear eye protection, such as chemical
safety glasses/googles. If in eyes, rinse cautiously with water for several
minutes, removing contact lenses if present and easy to do. If spilled,
avoid release to the environment.
STORAGE LIFE: Poly-Optic liquids can be stored for at least 6 months in
unopened containers stored at room temperature. Poly-Optic Part As may
crystallize slightly or become viscous during storage. If crystallization occurs
warm the container to 100-120°F until crystals dissipate. Cool to room
temperature before use.
55 Hilton Street, Easton, PA 18042 | 800.858.5990 | 610.559.8620 | Fax 610.559.8626 | www.polytek.com | sales@polytek.com
MOLD PREPARATION: Poly-Optic products reproduce minute detail
from a mold or pattern, but may stick or foam when poured on
improperly prepared surfaces; ensure that the surface is moisture-
free. Perform a trial casting on a surface similar to the final mold to
avoid damaging a valuable mold. Polyethylene and silicone rubber
(i.e., PlatSil® 71- and 73-Series) molds, do not require a release agent.
[CAUTION: Condensation-cure silicones (i.e., TinSil® 70-Series) are not
recommended for casting Poly-Optic since residual alcohol can inhibit
cure or produce hazy castings.] Latex, polyurethane or metal molds
must be dry and require a coat of a suitable release agent (i.e., Pol-Ease®
2300 Release Agent). For optically clear castings, use highly polished
masters to create molds with excellent surface quality.
MIXING: Before mixing resins, be sure that both Parts A and B are at
room temperature and that all tools and molds are ready to go! Use
metal or plastic mixing vessels (i.e., polyethylene pail) and spatulas to
avoid introducing moisture. Shake or stir Part B before use, if required.
Carefully weigh or measure proper ratios of A and B into a mixing
container. Mix immediately, thoroughly scraping sides and bottom.
Vacuum degas mix and pour into the mold as quickly as possible. Using
pre-heated molds (i.e., 150°F) reduces shrinkage and improves the
surface quality of Poly-Optic parts. Pressure casting helps produce clear
castings. A light spray of Pol-Ease 2300 Release Agent or quickly passing
the flame of a torch over the back of the casting helps to break bubbles
on the back of the pour. To produce bubble-free castings, vacuum
degassing and pressure casting is necessary.
Once Part A and B containers are opened, use the product completely
or reseal tightly since atmospheric moisture may cause foaming of the
plastic. To lengthen shelf life, spray Poly Purge, a heavier-than-air dry
gas, into the open containers before resealing. If containers collapse
slightly over time, reopen containers and spray more Poly Purge to keep
containers from further collapse.
CURING: Allow castings to remain in the mold until thoroughly cured.
Parts demolded too soon may be subject to deformation. Use pre-
warmed molds to hasten curing, and reduce shrinkage and improve
overall quality of the casting. Low temperatures slow the cure and
extend demold time.
Poly-Optic 1410, 1411, 14-70 and 1490 cure at room temperature. For
plastic castings less than ¼-inch thick, 1411 is recommended because it
can be demolded more quickly in thin sections. For thinner castings, or
when using Poly-Optic 1410 for thin parts, add Part 14X Catalyst or heat
cure (8 hr at 140-150°F). Castings greater than ½-in thick do not require
heat or 14X, but the addition or use of either will speed up the curing
process considerably.
Poly-Optic 1412 and 1420 are demoldable after 30 minutes at 175°F
and, if desired, can be post cured for 16 hours at 150°F for optimum
physical properties. To produce brittle, glass-like parts and props, cure
1420 at room temperature.
Wash mold release from surfaces prior to painting or bonding.
ACCELERATING CURE SPEED: Poly-Optic® 14 Part X Accelerator can be
mixed into Part B prior to adding Part A to accelerate gel and cure times.
For castings less than ½-in thick, Part X is recommended. Add 0.5% Part
X to the total mix weight to speed the cure significantly (e.g, 0.5g Part X
in a 100g mix of 1410 halves the pour and cure time). Exotherm (heat of
reaction) and thus shrinkage on cooling is also increased. Experiment to
determine the best amount of Part X to use, but do not use more than
1% Part X because final physical properties may be affected.
Poly-Optic® 14-Series Casting Resins | Technical Bulletin | Page 2
3. 55 Hilton Street, Easton, PA 18042 | 800.858.5990 | 610.559.8620 | Fax 610.559.8626 | www.polytek.com | sales@polytek.com
December 9, 2020
Poly-Optic® 14-Series Casting Resins | Technical Bulletin | Page 3
DISCLAIMER: The information in this bulletin and otherwise provided
by Polytek® Development Corp. is considered accurate. However, no
warranty is expressed or implied regarding the accuracy of the data, the
results to be obtained by the use thereof, or that any such use will not
infringe any patent. Before using, the user shall determine the suitability
of the product for the intended use and user assumes all risk and liability
whatsoever in connection therewith.
Accelerator:
Poly 14 Part X Accelerator
Retarder:
Poly 14 Part R Retarder
Sealers & Release Agents:
Pol-Ease® 2300 Release Agent
Pol-Ease® 2500 Release Agent
Product Life Extender:
PolyPurge Aerosol Dry Gas
Colors:
PolyColor Dyes
Black - Brown - Blue - Green - Red
- Yellow - White - Fleshtone
Fillers:
Bronze Powder
UV Stabilizers:
UV Additive
ACCESSORIES