Material Laying Capacity: 300 TPH
Engine Power: 125 hp
Screed size: 2.5m to 5.5m
Wheels on rear axle: Two on each side
Electronic Sensor: MOBA, Germany
Operator Seat: Double
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
This document provides specifications for various construction equipment including aerial work platforms, excavators, compactors, tipper trucks, flooring equipment, and a ride-on floor scraper. It lists details like work heights, capacities, engine information, dimensions, and standard features for each piece of equipment.
Material Laying Capacity : 100 TPH
Engine Power: 76 hp
Screed size: 2.5m to 4.5m
Wheels on rear axle: One on each side
Conveyor: Mechanical
Operator Seat: Double
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
This document provides specifications for a hydraulic crawler crane model CKE900-1F, including:
- A maximum lifting capacity of 90 metric tons at 3.4 meters for the crane boom and 10.9 metric tons at 18 meters for the fixed jib.
- The crane boom has a maximum length of 61 meters and the maximum fixed jib combination is 51.8 meters plus 18.3 meters.
- Additional details provided include engine specifications, hydraulic system components, dimensions, working ranges, and lifting capacity charts.
Claas dominator 78 h (type 079) combine service repair manualufjjsjekkdemd
This document provides specifications for the CLAAS Dominator 106 combine harvester including technical data, dimensions, weights, settings, and capacities. It includes information on the cutterbar, threshing equipment, straw walkers, cleaning system, engines, transmission, hydraulics, electrical system, and auxiliary equipment. Dimensions and specifications are provided for operating and transport positions. Settings such as hydraulic oil pressures, tire pressures, and wheel bolt torques are also listed. The document contains detailed technical specifications for the CLAAS Dominator 106 combine harvester model.
A paver is a piece of construction equipment that lays asphalt flat and provides minor compaction before a roller compacts it fully. There are different types of pavers including asphalt crawler pavers, asphalt wheeled pavers, and concrete pavers, which can operate on wheels or tracks depending on the pavement surface. Pavers are used to lay asphalt on roads, highways, ports, parking lots, and other areas.
An asphalt paver is a self-propelled machine that lays down asphalt. It has a hopper to temporarily store asphalt, which is then moved to the rear by conveyor belts and spread evenly by augers. A floating screed then levels and compacts the asphalt to the desired thickness and profile. The key components are the material feed system in the tractor to move asphalt to the augers, and the self-leveling screed that shapes and initially compacts the new asphalt surface.
Material Laying Capacity : 125 TPH
Engine Power: 76 hp
Screed size: 2.5m to 4.5m
Wheels on rear axle: One on each side
Electronic Sensor: MOBA, Germany
Operator Seat: Double
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
Material Laying Capacity: 300 TPH
Engine Power: 125 hp
Screed size: 2.5m to 5.5m
Wheels on rear axle: Two on each side
Electronic Sensor: MOBA, Germany
Operator Seat: Double
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
This document provides specifications for various construction equipment including aerial work platforms, excavators, compactors, tipper trucks, flooring equipment, and a ride-on floor scraper. It lists details like work heights, capacities, engine information, dimensions, and standard features for each piece of equipment.
Material Laying Capacity : 100 TPH
Engine Power: 76 hp
Screed size: 2.5m to 4.5m
Wheels on rear axle: One on each side
Conveyor: Mechanical
Operator Seat: Double
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
This document provides specifications for a hydraulic crawler crane model CKE900-1F, including:
- A maximum lifting capacity of 90 metric tons at 3.4 meters for the crane boom and 10.9 metric tons at 18 meters for the fixed jib.
- The crane boom has a maximum length of 61 meters and the maximum fixed jib combination is 51.8 meters plus 18.3 meters.
- Additional details provided include engine specifications, hydraulic system components, dimensions, working ranges, and lifting capacity charts.
Claas dominator 78 h (type 079) combine service repair manualufjjsjekkdemd
This document provides specifications for the CLAAS Dominator 106 combine harvester including technical data, dimensions, weights, settings, and capacities. It includes information on the cutterbar, threshing equipment, straw walkers, cleaning system, engines, transmission, hydraulics, electrical system, and auxiliary equipment. Dimensions and specifications are provided for operating and transport positions. Settings such as hydraulic oil pressures, tire pressures, and wheel bolt torques are also listed. The document contains detailed technical specifications for the CLAAS Dominator 106 combine harvester model.
A paver is a piece of construction equipment that lays asphalt flat and provides minor compaction before a roller compacts it fully. There are different types of pavers including asphalt crawler pavers, asphalt wheeled pavers, and concrete pavers, which can operate on wheels or tracks depending on the pavement surface. Pavers are used to lay asphalt on roads, highways, ports, parking lots, and other areas.
An asphalt paver is a self-propelled machine that lays down asphalt. It has a hopper to temporarily store asphalt, which is then moved to the rear by conveyor belts and spread evenly by augers. A floating screed then levels and compacts the asphalt to the desired thickness and profile. The key components are the material feed system in the tractor to move asphalt to the augers, and the self-leveling screed that shapes and initially compacts the new asphalt surface.
Material Laying Capacity : 125 TPH
Engine Power: 76 hp
Screed size: 2.5m to 4.5m
Wheels on rear axle: One on each side
Electronic Sensor: MOBA, Germany
Operator Seat: Double
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
Material Laying Capacity: 300 TPH
Engine Power: 125 hp
Screed size: 2.5m to 5.5m
Wheels on rear axle: Two on each side
Electronic Sensor: MOBA, Germany
Operator Seat: Double
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
Material Laying Capacity : 100 TPH
Engine Power: 76 hp
Screed size: 2.5m to 4.5m
Wheels on rear axle: One on each side
Conveyor: Mechanical
Operator Seat: Single (Right side fix)
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
Material Laying Capacity : 125 TPH
Engine Power: 76 hp
Screed size: 2.5m to 4.5m
Wheels on rear axle: One on each side
Conveyor: Hydrualic
Operator Seat: Double
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
development of main headings and gate roads with the use of road heading and bolter miners has paramount importance for effective production from a Longwall mine
If you’re looking for product quality improvements that only an ultra
precision tooling spindle can provide, and also require the robustness
of an industrial grade design, you no longer need to compromise.
Precitech’s ASD-H25 and ASD-Cx high speed air-bearing ultra
precision tooling spindles by Levicron are precisely what you need.
The document summarizes an eco-friendly surface mining machine called the KSM 304 Surface Miner produced by Larsen & Toubro Limited (L&T) of India. The KSM 304 cuts, crushes, and transports coal, limestone, and other minerals in a single operation without drilling or blasting. It is a rugged and reliable machine designed to operate in tough conditions. Key features include a cutting drum, hydrostatic drive, lifting system, safety controls, and an operator cabin. It provides an efficient and cost-effective alternative to traditional mining methods.
This document provides information about Soosan Cranes, a manufacturer of telescopic and articulated boom cranes and crane augers. It lists contact information for Soosan's headquarters in Korea and various international offices. It also provides technical specifications and details for several of Soosan's crane models, including their lifting capacities, boom dimensions, winch and slewing specifications. The document aims to showcase Soosan's product range and capabilities in lifting heavy loads for construction and other industrial applications.
Tts Energy Company Presentation 3108 2011 Ver B Aug2011aarshipathan
TTS Energy AS , Norway is supplier of the High performance drilling equipment packages to the global oil & gas drilling contractors , Shipyards & owners etc
Buy JCB JS205LC Tracked Excavator in India - JCB Heavy Machineryjcbheavymachinery
Buy now JCB JS205LC tracked excavator in India and get yourselves a state-of-the-art excavator made through using advance technology and in terms of reliability and durability the JCB JS205LC tracked excavator comes with Use of robust cast ends and pivot bosses provide strength and durability to boom and arm.
This document provides information on lineshaft driven live roller conveyors. It describes the general operating principle where a drive shaft spans the length of the conveyor and transmits power to rollers. It then provides specifications for 1 3/8 inch diameter lineshaft conveyors, including dimensions, materials, speeds, load capacities and options. It also describes lineshaft driven curve and spur conveyors for turns and merges, listing available angles and dimensions.
The document provides specifications for the Rhino RAP60W asphalt paver. It has versatile screed configurations to optimize job site performance. Key features include twin auger sections, a hopper with a capacity of 12 tons, and a hydraulic system with an axial piston pump and motors. It is highly adaptable with options for infrared heating screed, tracks, auto-leveling, and tier 3 or 4 engines.
This document provides detailed specifications and dimensions for a tracked excavator. It includes information on the excavator's operating weight, engine power, hydraulic system, undercarriage, swing system, cab features, and bucket/attachment compatibility. Dimensional data is provided for the excavator body and various attachments in both metric and imperial units. Performance specs are given for digging reach, digging depth, dumping height, and tearout forces depending on attachment configuration.
The document provides specifications and information about Soosan's STD series of top-hammer drill rigs. The STD series includes the STD11, STD11E, and STD14E models, which are hydraulic crawler drilling rigs designed for reliable drilling in quarries and civil construction. The document outlines the main features of the rigs, including their automatic drilling systems, dust collection systems, safety cabins, rock drills, and optional equipment.
This document provides information on various machines used in the cotton processing industry:
1. It describes machines for opening, cleaning, and ginning raw cotton like vertical openers, step cleaners, ginning machines, and horizontal cotton cleaners.
2. It then covers scouring, bleaching, and drying machines like pressure kiers, preheaters, hydroextractors, and chamber or conveyor dryers.
3. Finally, it mentions carding machines that card cotton, man-made fibers, and blends to produce sliver.
A CKD CORPORATION pode oferecer uma variedade de componentes para o processo de fabricação de peças automotivas para veículos elétricos, como motores, inversores e ECUs. Atuadores/Cilindros elétricos, motores de acionamento direto, garras e cilindros de longa duração, etc. Estes produtos podem contribuir para a sua alta produtividade.
1) The document describes a bitumen pressure distributor that provides uniform and prescribed quantities of hot bitumen or emulsion.
2) It has an insulated storage tank for hot bitumen and a unique pressure cleaning system to avoid clogging.
3) The distributor comes equipped with an air compressor, diesel engine, bitumen pump, remote control station, and other features to efficiently distribute bitumen.
Specifications of lapping, honing and broaching machineKaran Prajapati
This slide is prepared with the collective effort of Karan Prajapati, Athar Kothawal, Yudhishthir Ramnani and Samiraj Anupam who are doing B.Tech in Mechanical Engineering at School of Technology, Pandit Deendayal Petroleum University. The presentation describes the main terms of specifications in lapping, honing and broaching machines and also explaining the respective manufacturing processes. These machines are used for super-finishing processes.
Engineering-Design-Manufacturing-Assembly of all kind of equipments and services from a single spare parts to complete LF or complete meltshop. Ladles, ladle cars, gas purging stations, emergency lance stirrers, wire feeders, material handling systems, Slab Turnover Device, etc. Training and advisory services. Complete turnkey projects for Mini Steel Plant and rolling mills.
This document provides technical specifications for multiple pieces of woodworking machinery and equipment. It includes specifications for a vacuum membrane press, CNC router, manual honeycomb expander, protective film applicator, water spray booth, briquetting machine, and silicon sheet vacuum pumps. Key details provided include power requirements, dimensions, production capacities, and functional features.
PROJECT REPORT ON BHEL BHOPAL FOR MECHANICALRohitsen21
This presentation is on vocational training that I have done between 12 july to 1 august, in BHEL BHOPAL I visited all the blocks and our training was sheduled to WTM block and traction motor block.
lamination machine is made to handle various films with different mechanical and chemical characteristics and with even opposing sensibility to heat or solvents.
Material Laying Capacity : 100 TPH
Engine Power: 76 hp
Screed size: 2.5m to 4.5m
Wheels on rear axle: One on each side
Conveyor: Mechanical
Operator Seat: Single (Right side fix)
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
Material Laying Capacity : 125 TPH
Engine Power: 76 hp
Screed size: 2.5m to 4.5m
Wheels on rear axle: One on each side
Conveyor: Hydrualic
Operator Seat: Double
Work Applicability
Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
development of main headings and gate roads with the use of road heading and bolter miners has paramount importance for effective production from a Longwall mine
If you’re looking for product quality improvements that only an ultra
precision tooling spindle can provide, and also require the robustness
of an industrial grade design, you no longer need to compromise.
Precitech’s ASD-H25 and ASD-Cx high speed air-bearing ultra
precision tooling spindles by Levicron are precisely what you need.
The document summarizes an eco-friendly surface mining machine called the KSM 304 Surface Miner produced by Larsen & Toubro Limited (L&T) of India. The KSM 304 cuts, crushes, and transports coal, limestone, and other minerals in a single operation without drilling or blasting. It is a rugged and reliable machine designed to operate in tough conditions. Key features include a cutting drum, hydrostatic drive, lifting system, safety controls, and an operator cabin. It provides an efficient and cost-effective alternative to traditional mining methods.
This document provides information about Soosan Cranes, a manufacturer of telescopic and articulated boom cranes and crane augers. It lists contact information for Soosan's headquarters in Korea and various international offices. It also provides technical specifications and details for several of Soosan's crane models, including their lifting capacities, boom dimensions, winch and slewing specifications. The document aims to showcase Soosan's product range and capabilities in lifting heavy loads for construction and other industrial applications.
Tts Energy Company Presentation 3108 2011 Ver B Aug2011aarshipathan
TTS Energy AS , Norway is supplier of the High performance drilling equipment packages to the global oil & gas drilling contractors , Shipyards & owners etc
Buy JCB JS205LC Tracked Excavator in India - JCB Heavy Machineryjcbheavymachinery
Buy now JCB JS205LC tracked excavator in India and get yourselves a state-of-the-art excavator made through using advance technology and in terms of reliability and durability the JCB JS205LC tracked excavator comes with Use of robust cast ends and pivot bosses provide strength and durability to boom and arm.
This document provides information on lineshaft driven live roller conveyors. It describes the general operating principle where a drive shaft spans the length of the conveyor and transmits power to rollers. It then provides specifications for 1 3/8 inch diameter lineshaft conveyors, including dimensions, materials, speeds, load capacities and options. It also describes lineshaft driven curve and spur conveyors for turns and merges, listing available angles and dimensions.
The document provides specifications for the Rhino RAP60W asphalt paver. It has versatile screed configurations to optimize job site performance. Key features include twin auger sections, a hopper with a capacity of 12 tons, and a hydraulic system with an axial piston pump and motors. It is highly adaptable with options for infrared heating screed, tracks, auto-leveling, and tier 3 or 4 engines.
This document provides detailed specifications and dimensions for a tracked excavator. It includes information on the excavator's operating weight, engine power, hydraulic system, undercarriage, swing system, cab features, and bucket/attachment compatibility. Dimensional data is provided for the excavator body and various attachments in both metric and imperial units. Performance specs are given for digging reach, digging depth, dumping height, and tearout forces depending on attachment configuration.
The document provides specifications and information about Soosan's STD series of top-hammer drill rigs. The STD series includes the STD11, STD11E, and STD14E models, which are hydraulic crawler drilling rigs designed for reliable drilling in quarries and civil construction. The document outlines the main features of the rigs, including their automatic drilling systems, dust collection systems, safety cabins, rock drills, and optional equipment.
This document provides information on various machines used in the cotton processing industry:
1. It describes machines for opening, cleaning, and ginning raw cotton like vertical openers, step cleaners, ginning machines, and horizontal cotton cleaners.
2. It then covers scouring, bleaching, and drying machines like pressure kiers, preheaters, hydroextractors, and chamber or conveyor dryers.
3. Finally, it mentions carding machines that card cotton, man-made fibers, and blends to produce sliver.
A CKD CORPORATION pode oferecer uma variedade de componentes para o processo de fabricação de peças automotivas para veículos elétricos, como motores, inversores e ECUs. Atuadores/Cilindros elétricos, motores de acionamento direto, garras e cilindros de longa duração, etc. Estes produtos podem contribuir para a sua alta produtividade.
1) The document describes a bitumen pressure distributor that provides uniform and prescribed quantities of hot bitumen or emulsion.
2) It has an insulated storage tank for hot bitumen and a unique pressure cleaning system to avoid clogging.
3) The distributor comes equipped with an air compressor, diesel engine, bitumen pump, remote control station, and other features to efficiently distribute bitumen.
Specifications of lapping, honing and broaching machineKaran Prajapati
This slide is prepared with the collective effort of Karan Prajapati, Athar Kothawal, Yudhishthir Ramnani and Samiraj Anupam who are doing B.Tech in Mechanical Engineering at School of Technology, Pandit Deendayal Petroleum University. The presentation describes the main terms of specifications in lapping, honing and broaching machines and also explaining the respective manufacturing processes. These machines are used for super-finishing processes.
Engineering-Design-Manufacturing-Assembly of all kind of equipments and services from a single spare parts to complete LF or complete meltshop. Ladles, ladle cars, gas purging stations, emergency lance stirrers, wire feeders, material handling systems, Slab Turnover Device, etc. Training and advisory services. Complete turnkey projects for Mini Steel Plant and rolling mills.
This document provides technical specifications for multiple pieces of woodworking machinery and equipment. It includes specifications for a vacuum membrane press, CNC router, manual honeycomb expander, protective film applicator, water spray booth, briquetting machine, and silicon sheet vacuum pumps. Key details provided include power requirements, dimensions, production capacities, and functional features.
PROJECT REPORT ON BHEL BHOPAL FOR MECHANICALRohitsen21
This presentation is on vocational training that I have done between 12 july to 1 august, in BHEL BHOPAL I visited all the blocks and our training was sheduled to WTM block and traction motor block.
lamination machine is made to handle various films with different mechanical and chemical characteristics and with even opposing sensibility to heat or solvents.
Similar to Uniter sensor paver finisher machine model vp 05 presentation (20)
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
The Python for beginners. This is an advance computer language.
Uniter sensor paver finisher machine model vp 05 presentation
1. Model: VP-05
Hydrostatic Asphalt Paver Finisher with Electronic Sensor
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
Tested and Approved
by BS-III engine
2. ESP-05 is powered by Kirloskar make
water-cooled electric start diesel engine,
Model 6R 1080 TA1, 125 hp @ 2300
rpm.
Engine has sufficient space on all the
sides for air draft and cooling of engine.
Engine is easily accessible for daily
maintenance like checking engine oil,
coolant water level, engine suction filter
etc.
Engine starter, alternator can be easily
removed for periodic maintenance.
PRIME MOVER
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
3. Manual and Auto mode compatible.
Electronic Sensors controls the grade
and slope which give easy and accurate
modification to adjust the laying mat
thickness according to the job
requirements.
Electronic Sensor of MOBA, Germany
(imported) is used.
MOBA, Germany is a major supplier of
sensors for paver all over the world.
ELECTRONIC SENSOR
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
4. All the functions to control the machine are
provided on a single control panel, mounted
within easy reach of the operator.
Sliding type operator panel with traveling
functions on left and right side.
Operating functions on left side with double
operator seat.
Machine is hydraulically controlled by means
of simple switches of operator panel
Gauges like engine temperature, oil pressure,
ampere meter are on sliding panel and are
easily visible from operator’s seat.
CONTROL PANEL
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
Hydrostatic steering is fitted for effortless
operation.
Extreme care has been taken for mounting the
control panel so that the operator has
maximum visibility.
5. Tandem bogie of pneumatic tyres, size
10.00 x 20 four nos., are mounted on
equalizer beam to ensure maximum
floatation and equal weight distribution.
Double wheel on rear axle gives more
traction force which reduces chances for
tyre slippage.
Wheels are with equalizer beam which
reduces undulations of the laid surface.
REAR BOGIE
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
6. Movement of the two hoppers is
obtained by means of hydraulic
cylinder operated independently by
simple switches of control panel.
Two pallet conveyors with
hardened steel chain provide the
material to two sets of augers which
spreads material on both sides and
are controlled independently from
the operator’s seat.
Hopper Capacity: 4.25 CM
HOPPER & FEEDING SYSTEM
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
7. Worm spreads material in front of screed in total
width of pavement.
Properly sealed bearings are used for greater life
as they are always covered with the laying
material while paving.
Special arrangement for greasing is provided as
greasing is required daily for greater life of
bearing.
Worm is of Ni-Hard / Hi Chromium steel
material, properly heat treated for greater
service life.
Proper covers for chain are provided for greater
service life of chain.
WORM ASSEMBLY
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
8. 2.5 m basic width, Hydraulically
extendable to 4.5 m and further
extension to 5.5 m by bolt on extension.
Main screed is pivoted at the center
point of the machine to assure a
constant flatness or work on uneven
grounds.
Lateral mobile plates are hydraulically
operated, sliding on chromium plated
telescopic cylindrical guides for wear
resistance to archive paving width up to
extendable limit.
Screed plate is heated by 8 LPG burners
two on each mobile plate and four on
main screed plate.
SCREED
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
Screed Vibration & Tamping is provided for complete
length of screed with infinitely variable frequency from
zero to 3000 rpm (Max) & 1500 rpm (Max) respectively.
9. MAINTENANCE SHUTTERS
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
Shutters are provided on three side of machine which can
easily be opened for easy inspection and maintenance of
the machine.
Special care has been taken to keep maintenance parts on
left side of machine so that maintenance on road can be
safe.
Filters are kept on outer side of machine for maintenance.
Maximum use of MS pipe is done as it occupies less space,
can be easily clamped and reduce chances of leakage.
10. 1. WORM EXTENSION SUPPORT, 2. MOBA GRADE SENSOR
AND 3. MATERIAL CONTROL SYSTEM
Worm extension support with
material guiding plate.
MOBA, Germany make grade sensor.
Limit switch which stops conveyor
and auger movement when material
level is high and it starts conveyor
and auger when material level is low
(Automatic material control system).
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
11. Two operator seats on both sides.
Moba, Germany make slope sensor.
Shutter on back side of machine
which makes maintenance on back
side of machine easier.
Two panel boards, one on left and
one on right. These panel board
contains material thickness control
and screed extension functions.
1. OPERATOR SEAT, 2. MOBA SLOPE SENSOR,
3. SHUTTER ON BACK SIDE AND 4. CONTROL PANEL ON SCREED
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
12. PAVER SPECIFICATION
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
POWER UNIT
Engine Kirloskar make water-cooled electric start diesel engine,
Model 6R 1080 TA1, 125 hp (93 kW) @ 2200 rpm or equivalent
Electrical System 12 V DC
Emission Standard BS-III
Speed Reduction Gearbox Two speed reduction gearbox to achieve low speed for paving and
high speed for traveling.
SCREED
Screed width 2.5 m (8’ 2½”) basic width, Hydraulically extendable up to 4.5 m (14’
91/8”), bolt on extension up to 5.5 m (18’ ½”)
Option: Attachment up to 6.0m (19’ 8¼”)
Crown (Manual) -1° / +4°
Screed Heating Yes, with 8 LPG burner facility
Screed Vibration Yes, infinitely variable (0 to 50.00 Hz)
Screed Tamping Yes, infinitely variable (0 to 33.33 Hz)
13. PAVER SPECIFICATION
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
PERFORMANCE
Laying suitability Option 1: Bituminous material
Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)
Laying Capacity 300 TPH
Laying Thickness 300 mm (Max) to 10 mm (Min)
12” (Max) to 3/8” (Min)
Transmission Hydrostatic
Working Speed 0 to 30 m/min (Max.)
Travelling Speed 0 to 16 km/hr (Max)
Weight 14,100 kg (31,200 lb) approx.
Slope & Grade Control MOBA, Germany make electronic sensor
(Auto & Manual mode available)
Maintenance Shutters On three side of machine
Traction & Conveyor
Pump - Motor
Sauer Danfoss, Germany or equivalent
14. PAVER SPECIFICATION
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
OPERATOR STATION
Control Panel Type Sliding
Operator Seat Double Operator Seat
Travelling Function Left & Right side
Operating Function Left & Right side
Steering Hydraulic
Brake Caliper disc brake on both the sides
UNDER CARRIAGE
Rear Wheel Four no. Pneumatic Tyre
Size: 10.00 x 20
Front Wheel Four no. Solid Rubber Tyre
550 Dia. x 175 mm wide
15. PAVER SPECIFICATION
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
CONVEYOR & AUGER SYSTEM
Conveyor & Auger 2 Sets, one on each side
Conveyor Drive Hydraulic
Conveyor Control On / off switch function
Auger Screw Size Dia 300 mm (12”)
Auger Material Ni-Hard / High Chromium Steel Material
HOPPER & FEEDING SYSTEM
Hopper Operation Hydraulic
Hopper Capacity 4.25 m3 (151 ft3)
Hopper Width Working: 3.22 m (10’ 6 ¾”)
Closed: 2.44 m (8’)
Feed Tunnel Width 1.268 m (4’ 15/8”)
16. PAVER SPECIFICATION
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
DIMENSIONS
Operating Height 3.47 m (11’ 45/8”)
Shipping Height (canopy tilted)
(w/o canopy & exhaust)
2.90 m (9’ 6¼”)
2.68 m (8’ 9½”)
Shipping Width 2.57 m (8’ 5¼”)
Length (Tractor unit + screed) 6.67 m (21’ 10½”)
Wheel Base 2.61 m (8’ 67/8”)
Dump Height 0.70 m (2’ 3½“)
Thrust Roller Height 0.54 m (1’ 9¼“)
REFILL CAPACITIES
Fuel 156 L (34.4 gal)
Hydraulic Oil 282 L (62.1 gal)
Cooling System 6.5 L (1.4 gal)
Engine Oil 14.0 L (3.0 gal)
17. PAVER SPECIFICATION
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
OTHER FEATURES
All operating levers including panel switch board are handy and within easy reach; All gears and
shafts of gear box are made from alloy steel and are hardened and ground for efficient working;
Screed is vibrated with hydraulic motor to compact laid layer; All jacks are having same kind of
seal kit (Piston seal and rod seal of PU material).
MACHINERY ACCESSORIES
Canvas Canopy; Working & Traveling Lights; Tool Kit with Jack; Horn
Note: Specification / description / dimensions are indicative and subject to change without notice due to modification alteration or
custom engineering.)
18. Refer our website for detailed product information and to have paver comparative chart.
“INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.”
OUR WEBSITE
www.uniter.in