This document provides specifications for various construction equipment including aerial work platforms, excavators, compactors, tipper trucks, flooring equipment, and a ride-on floor scraper. It lists details like work heights, capacities, engine information, dimensions, and standard features for each piece of equipment.

1. 1300 768 459

2. 12ft GENIE RUNABOUT GRC12
Specifications:
Work Height: 5.66m
Raised Platform Height: 3.66m
Stowed Height: 1.70m
Width: 0.80m
Stowed Length: 1.37m
Weight: 948kg
Overall Capacity: 227kg
Max # of Persons (0 wind rating): 2
Page 5
Standard Features:
• AC power to platform
• Battery charge indicator
• Compact base 0.75 x 1.37m
• Ground clearance 2.5in stowed
• Auxiliary platform lowering
• 2 person rated
• Pothole protection
• Zero inside turning radius
• Solid rubber non-marking tyres
12ft SKYJACK SJ12 MAST LIFT
Specifications:
Work Height: 5.65m
Raised Platform Height: 3.65m
Lowered Platform Height: 0.45m
Overall Width: 0.76m
Overall Length: 1.37m
Weight: 782kg
Overall Capacity: 227kg
Max # of Persons (0 wind rating): 2
Standard Features:
• Wiring for AC outlet on platform
• 0.41m traversing platform
• 24V DC power source
• 30% gradeability
• Variable speed, front two wheel
hydraulic drive
• Drivable at full height
• Pothole protection system
• Relay based control system
• Tilt alarm with drive & lift cut-out
• Overload sensing system
• Solid rubber, non-marking tyres
• Lowering warning system
• Wet disc SAHR brakesTrailer also available for
GRC12 and SJ12 models

3. Page 6
16ft SKYJACK SJ16 MAST LIFT
Specifications:
Work Height: 6.75m
Raised Platform Height: 4.75m
Lowered Platform Height: 0.45m
Overall Width: 0.76m
Overall Length: 1.37m
Stowed Height: 1.79m
Weight: 966kg
Overall Capacity: 227kg
Max # of Persons (0 wind rating): 2
Standard Features
• Drivable at full height
• Zero inside turning radius
• Wet disc SAHR brakes
• Proportional controls
• 0.41m traversing platform
• 30% gradeability
• 24V DC power source
• Solid rubber non-marking tyres
• Pothole protection system
• Relay based control system
• Overload sensing system
• All motion audible alarm
19ft SKYJACK SJ3219 SCISSOR LIFT
Specifications:
Work Height: 7.79m
Raised Platform Height: 5.79m
Lowered Platform Height: 0.99m
Overall Width: 0.81m
Overall Length: 1.78m
Weight: 1579kg
Overall Capacity: 227kg
Max # of Persons (0 wind rating): 2
Standard Features
• Drivable at full height
• 90deg steering
• Zero inside turning radius
• Wet disc SAHR brakes
• Proportional controls
• 0.41m traversing platform
• 25% gradeability
• 24V DC power source
• Solid rubber non-marking tyres
• Pothole protection system
• Analog control system
• Overload sensing system
• All motion audible alarm
Trailer also available
For SJ16 and SJ3219 models

4. Page 7
32ft HAULOTTE HA12CJ+ ELECTRIC BOOM
Specifications:
Work Height: 11.7m
Raised Platform Height: 9.7m
Horizontal Outreach: 7.22m
Up & Over Clearance: 4.74m
Stowed Height: 1.99m
Width: 1.2m
Length: 5.64
Platform Size: 1.15m x 0.8m
Weight: 7040kg
Overall Capacity: 230kg
Max # of Persons (0 wind rating): 2
Standard Features:
• Ergonomic control panels
• Tilt sensor
• Emergency hand pump
• 2 wheel drive and steer
• Automatic platform levelling
• On board charger 48V – 50A
• Safe to use in winds up to 45km/h
• Solid non-marking tyres
• Load Management System in the
platform
• 180deg horizontal jib rotation
• 355deg turntable rotation
• 25% gradeability
46ft SKYJACK SJ46AJ DIESEL BOOM
Specifications:
Work Height: 16.15m
Raised Platform Height: 14.15m
Horizontal Outreach: 7.68m
Up & Over Clearance: 7.63m
Stowed Height: 2.07m
Stowed Width: 2.24m
Stowed Length: 6.50m
Weight: 6981kg
Overall Capacity: 227kg
Jib Length: 1.42m
Platform Size: 1.83 x 0.76m
Engine: 48HP Deutz Diesel
Standard Features:
• Axle based 4WD system
• Oscillating axle
• Driveable at full height
• 360deg continuous turret rotation
• 45% gradeability
• Modular platform railing system
• Wiring outlet on platform
• Direction sensing drive & steer
controls
• Proportional controls
• Relay based control system
• Overload sensing system
• Wet disc SAHR brakes (rear axle)
• Grip lug foam-filled tyres

5. Page 8
CAT 301.7D CR EXCAVATOR
Specifications:
Weight: 1690kg
Power: 13.2kW / 17.7hp @ 2200rpm
Max Digging Height: 3.43m
Max Digging Depth: 2.32m
Max Digging Reach at Ground Level:
3.84m
Overall Length: 3.584m
Overall Width: 0.73m
Overall Height: 2.362m
Tail Swing Radius: 0.722m
Lifting Capacity (Max Reach): 113kg
Special Features
• Standard auxiliary hydraulics
• Integrated counterweight and
tight tail swing
• Rubber tracks
• Two-post ROPS canopy
• Load sensing hydraulic system
• Safety Lock Out
• Adjustable suspension seat
• 2 Way Hammer / Auger Piping
• Available on a trailer
KOMATSU PC18MR-3 EXCAVATOR
Specifications:
Weight: 1780kg
Max Digging Height: 3.62m
Max Digging Depth: 2.16m
Max Digging Reach at Ground
Level: 3.94m
Loading Height: 1.22m
Overall Length: 3.65m
Overall Width: 1.28m
Overall Height: 2.41m
Tail Swing Radius: 0.72m
Lift Capacity (Max Reach): 220kg
Special Features
• Standard auxiliary hydraulics
• Two-post ROPS canopy
• Integrated counterweight and
tight tail swing
• Automatic load sensing two-
speed travel
• High strength X-track frame
• Fully adjustable suspension seat
• Available on a trailer

6. Page 9
KOMATSU PC35MR-3 EXCAVATOR
Specifications:
Weight: 3575kg
Max Digging Height: 5m
Max Digging Depth: 3.11m
Max Digging Reach at Ground
Level: 5.17m
Loading Height: 1.8m
Overall Length: 4.83m
Overall Width: 1.74m
Overall Height: 2.52m
Tail Swing Radius: 0.95m
Lift Capacity (Max Reach): 345kg
Special Features
• Standard auxiliary hydraulics
• Integrated counter weight and
tight tail swing
• Two-post ROPS canopy
• Automatic load sensing two-
speed travel
• High strength X-track frame
• 2 Way hammer / Auger Piping
• Adjustable suspension seat
CAT CB14B ROLLER
Specifications:
Weight: 1520kg
Drum Width: 1000mm
Overall Length: 1950mm
Overall Width: 1102mm
Overall Height: 2545mm
Engine Power: 16.8kW
(22.5hp) @ 2850rpm
Side Clearance: 45mm
Curb Clearance: 400mm
Special Features
• Adjustable seat
• Pressurized system with four nozzles per
drum optimise water coverage
• Standard 100L water tank
• Retractable front & rear drum scrapers
• Rubber mounts minimise vibration to the
operator station
• Performs well on uneven surfaces, and
steeper grades
• Continuous full-drum traction on soft
base materials
• Quiet operation and lower vibration
• Foldable ROPS
• Machine can fit on trailer

7. Page 10
ISUZU FRR 500 TIPPER
Specifications:
Medium Rigid Licence Required
GVM: 10,400kg
GCM: 16,000kg
Engine: SiTEC III 205
Power: 151kw @ 2,600rpm
Torque: 637Nm @ 1,600rpm
Wheelbase: X-Long 5,320mm
2015 Model
Diesel Turbo Charge
4 Cylinders
Single Cab
Features:
• 6 Tonne Towbar
• 6 Speed Manual
• Pintle Hook Ball Combination
• Reducer
• Reverse Camera
• Power Windows
• 3 Seats
• Retractable Tarp
• Air-Con
• DAVE Media System
• Electric ABS Brakes
ISUZU NLR200 TIPPER
Specifications:
Car Licence Only Required
GVM: 4,500kg
GCM: 7,000kg
Engine: SiTEC III 150
Power: 110kw @ 2,800rpm
Torque: 375Nm @ 1,600rpm
– 2,800rpm
2015 Model
6 Auto-Mated Manual
4 Cylinders
Features:
• 2 Tonne
• 3.0L Turbo
• 6 Speed Automated Manual
• Towbar & Reducer
• Retractable Mesh Tarp
• DAVE Media System
• Air-Con
• 3 Seats
• Power Steering
• Anti-lock braking system (ABS)
• Anti Skid Regulator (ASR)

8. Page 11
ISUZU NPR 200 TIPPER
Specifications:
Car Licence Only Required
GVM: 4,500kg
GCM: 8,000kg
Engine: SiTEC III 155
Power: 114kw @ 2,600rpm
Torque: 419Nm @ 1,600rpm
– 2,600rpm
2015 Model
6 Speed Manual
4 Cylinders
Features:
• 5.2L Turbo
• 3.5 Tonne Tow Bar
• Pintle Hook Combination
• 3,500kg braked towing capacity
• Air-Con
• Dave Media System
• Power Steering
• Anti-lock braking system (ABS)
• Anti Skid Regulator (ASR)
• 3 Seats
ISUZU NNR200 PANTECH
Specifications:
Car Licence Only Required
GVM: 4,500kg
GCM: 8,000kg
Power: 110kw @ 2,800rpm
Torque: 375Nm @
1,600rpm – 2,800rpm
2015 Model
Auto-Mated Manual
4 Cylinders
Cab Chassis
Features:
• 3L Turbo
• 6 Speed Automated Manual
• 3 Tonne
• Ply Safe Flooring
• Rear barn doors
• 500kg tuckaway tailgate loader
• Reverse Camera
• Power Steering
• ABS Braking system
• Anti Skid Regulator (ASR)
• Pantech body – 4200L x 2300W x
2200H

9. Page 12
FLOOR STRIPPER BEAVER 300
Features:
• Direct shot oscillating blade system
• Forward & reverse high speed override
• Highly aggressive hit directly to the blade
• For Medium to Large domestic, commercial
and industrial projects
• Removes glued down floors, commercial
carpet, gummy adhesives, vinyl tiles, solid
vinyl, radial rubber-tiles, sheet rubber,
sports surfaces, roofing material and some
ceramic tiled floor surfaces
• Vibration dampened operator handle
Specifications:
Power: 240v / 1HP
RPM: 1440
Blade Width: 70-250mm
Weight: 160kg
SATELLITE 480 DIAMOND GRINDER
Specifications:
Power: 2200w / 3HP
Volt: 240v
RPM: 360
Suction: 50mm
Production: 40-75sqm/hr
Width: 480mm
Weight: 160kg
Features:
• Adjustable axle height for ease of use
• Direct drive
• Ergonomic design – balance operation
which reduces operator fatigue
• Floating dust shroud for effective dust
control
• For small to medium sized domestic,
commercial and industrial projects
• Machine can be used for grinding,
polishing, buffing, concrete removal,
levelling, cleaning, glue removal and
re-surfacing.
Need to control the dust?
Hire our Dust Extractor.

10. Page 13
FLOOR SCARIFIER CPM-8
Specifications:
Power: 2.2kw / 3HP
Working Depth: 2-3mm
Working Width: 200mm
Weight: 92kg
Dimensions: 97L x 48W x 99H
Volt: 240v Electric
Production rate: 35-50sqm / hr
Features:
• Weight of machine provides excellent control
and ease of use
• Six-shaft drum assembly holds more cutters
per loading for added grinding action.
• A variety of accessories and cutters to
achieve the profile, depth and speed needed
for each job.
• Power source directly over drum to eliminate
vibration and maximise surface contact.
• Ideal for sidewalk repair, coating and traffic
line removal, floor preparation and creating
nonslip surfaces
TWISTER RIDE-ON-FLOOR SCRAPER
Specifications:
Power: 75HP / LPG
Speed: 152 m/min
Blade Width: 600mm
Weight: 1910kg loaded
Dimensions: 1870L x
660W x 1520H
Production Rate:
130sqm/hr
Features:
• Comfortable to ride and drive
• Extremely quiet
• Hydraulic Oil Cap 56L
• Powered by a Ford four cylinder LPG engine
• Removes Carpet, Vinyl Tiles, Sheet Vinyl,
Parquetry, Ceramic Tiles, Mosaic Tiles,
Slate, Quarry Tiles, Terrazzo Tiles, Rubber
Sports Floor