This document provides specifications for the CLAAS Dominator 106 combine harvester including technical data, dimensions, weights, settings, and capacities. It includes information on the cutterbar, threshing equipment, straw walkers, cleaning system, engines, transmission, hydraulics, electrical system, and auxiliary equipment. Dimensions and specifications are provided for operating and transport positions. Settings such as hydraulic oil pressures, tire pressures, and wheel bolt torques are also listed. The document contains detailed technical specifications for the CLAAS Dominator 106 combine harvester model.
Liebherr ta240 articulated truck service repair manualufjjsjekkdemd
The document is a technical manual that provides an overview of various systems for a piece of machinery. It includes sections on technical data, maintenance, drive systems, cooling, hydraulics, steering, brakes, electrical, axles, working equipment, cab features, lubrication, software, hardware, and options. The document encourages the reader to click on a link for the complete manual or download the PDF.
Liebherr ta230 articulated truck service repair manualufjjsjekkdemd
The document is a technical manual that provides an overview of various systems for a piece of machinery. It includes sections on technical data, maintenance, drive groups, cooling systems, hydraulics, steering, brakes, electrical systems, axles, working equipment, cab features, lubrication and software/hardware options. The document encourages the reader to click on a link for the complete manual or download the PDF.
Liebherr r974 c 1011 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r974 c 1010 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r974 c 449 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1416 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1165 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr er 900 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Liebherr ta240 articulated truck service repair manualufjjsjekkdemd
The document is a technical manual that provides an overview of various systems for a piece of machinery. It includes sections on technical data, maintenance, drive systems, cooling, hydraulics, steering, brakes, electrical, axles, working equipment, cab features, lubrication, software, hardware, and options. The document encourages the reader to click on a link for the complete manual or download the PDF.
Liebherr ta230 articulated truck service repair manualufjjsjekkdemd
The document is a technical manual that provides an overview of various systems for a piece of machinery. It includes sections on technical data, maintenance, drive groups, cooling systems, hydraulics, steering, brakes, electrical systems, axles, working equipment, cab features, lubrication and software/hardware options. The document encourages the reader to click on a link for the complete manual or download the PDF.
Liebherr r974 c 1011 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r974 c 1010 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r974 c 449 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1416 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1165 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr er 900 hydraulic excavator service repair manualufjjsjekkdemd
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
This document is a parts catalog for a Wheel Loader model 95Z7B powered by an ISUZU 6WG1 engine. It lists various parts grouped by system such as engine systems, cab, chassis, hydraulic system, and loader attachment. For each part, it provides the part number, quantity needed, and applicable serial number range. The document also includes indexes for part symbols and part numbers.
This document is a parts catalog for a wheel loader model 95Z7 powered by an Isuzu 6WG1 engine. It contains listings of parts for various components of the loader organized by part number, name, quantity, and serial number range. The parts included are for systems such as the relay unit mount, buzzer mount, horn mount, battery, battery switch mount, electrical sensors, and a lift arm auto-leveler system. Electrical parts for the instrument panel are also listed.
Jcb js210, js230 excavator service repair manual (from 2453501 to 2453750)ufjjsjekkdemd
This document is a service manual for excavator models JS210 and JS230 that contains instructions for maintenance and repair. It includes sections on machine components, safety procedures, descriptions of systems, and troubleshooting guides. Safety is emphasized, with warnings about operating or working on the machine without understanding the manual and ensuring proper training, protective equipment, and safety practices are followed.
Jcb js210, js230 excavator service repair manual (from 2453251 to 2453500)ufjjsjekkdemd
This service manual provides instructions for maintaining and repairing excavators models JS210 and JS230. It contains sections covering the machine components, safety procedures, and a description of the machine. The manual instructs technicians on safety during maintenance, operating procedures, and working on job sites. It also includes diagrams and specifications for repairs and replacements of parts.
Jcb js130 excavator service repair manual sn 2397429 and upufjjsjekkdemd
The document provides service information for excavator tracks. It includes sections on track components, checking track condition, adjusting track tension, removing and installing tracks, and storing tracks. The main components of the track system are identified and diagrams are provided showing typical track installations. Technical specifications are given for track tension, pin and bush wear limits, link height wear limits, and replacement thresholds. Procedures are outlined for checking track components for wear and damage.
Jcb js115 t3 excavator service repair manual sn 2397465 and upufjjsjekkdemd
The document provides service information for excavator tracks. It includes sections on track components, checking track condition, adjusting track tension, removing and installing tracks, and storing tracks. The main components described are the steel track chain, pins, bushes, links, and tensioning/idler wheel assembly. Instructions are given on inspecting wear of these parts and taking corrective actions such as adjusting, replacing, or turning the track pins and bushes. Technical specifications are also included for measuring track tension and wear limits of pins, bushes, and links.
Jcb 540 v180 telescopic handler service repair manual sn from 2460601 onwardsufjjsjekkdemd
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers systems like the engine, brakes, hydraulics, and electrical systems. The manual instructs technicians to study it before operating or maintaining the machine to prevent injury or death. It also contains sections on safety, maintenance procedures, technical specifications, and the removal and installation of components.
Jcb 540 v140 telescopic handler service repair manual sn from 2902000 onwardsufjjsjekkdemd
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 536 t70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 536 70 tier 4 telescopic handler service repair manual sn from 2336575 on...ufjjsjekkdemd
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for reinstalling injectors and seals.
Jcb 536 70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. Procedures are provided for maintenance, removal and installation of parts, and repair. Safety warnings are included throughout regarding working on and operating the machines.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2902000 on...ufjjsjekkdemd
This service manual provides instructions for servicing the components of a Loadall rough terrain variable reach truck, including the fuel injection system. The document discusses fuel injectors, injector seals, the common rail, and the high pressure fuel injection pump. Procedures are provided for checking injector operation, removing and installing injectors, removing and installing injector seals, removing and installing the common rail, and identifying components of the high pressure fuel injection pump. Safety information, required tools, and torque specifications are also included.
Jcb 536 60 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 535 t95 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 535 95 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 533 105 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 531 t70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 531 70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 250 skid steer loader service repair manual sn from 2476302 to 2477300ufjjsjekkdemd
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Hyundai R16-7 Mini Excavator Service Repair Manualufjjsjekkdemd
This is the Highly Detailed factory service repair manual for theHYUNDAI R16-7 MINI EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYUNDAI R16-7 MINI EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
1. Precautions on Maintenance
2. Outline
3. Attachment
4. Engine
5. Main Pump
6. Hydraulic Oil Filter
7. Control Valve
8. Joystick
9. Slew Motor
10. Travel Motor
11. Hydraulic Cylinder
12. Swivel Joint
13. Crawler
14. Spring Case and Grease Cylinder
15. Idler
16. Sprocket
17. Track Roller
18. Electrical Equipment
19. Troubleshooting
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYUNDAI R16-7 MINI EXCAVATOR Service Repair Workshop Manual.
Thanks for visiting!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
This document is a parts catalog for a Wheel Loader model 95Z7B powered by an ISUZU 6WG1 engine. It lists various parts grouped by system such as engine systems, cab, chassis, hydraulic system, and loader attachment. For each part, it provides the part number, quantity needed, and applicable serial number range. The document also includes indexes for part symbols and part numbers.
This document is a parts catalog for a wheel loader model 95Z7 powered by an Isuzu 6WG1 engine. It contains listings of parts for various components of the loader organized by part number, name, quantity, and serial number range. The parts included are for systems such as the relay unit mount, buzzer mount, horn mount, battery, battery switch mount, electrical sensors, and a lift arm auto-leveler system. Electrical parts for the instrument panel are also listed.
Jcb js210, js230 excavator service repair manual (from 2453501 to 2453750)ufjjsjekkdemd
This document is a service manual for excavator models JS210 and JS230 that contains instructions for maintenance and repair. It includes sections on machine components, safety procedures, descriptions of systems, and troubleshooting guides. Safety is emphasized, with warnings about operating or working on the machine without understanding the manual and ensuring proper training, protective equipment, and safety practices are followed.
Jcb js210, js230 excavator service repair manual (from 2453251 to 2453500)ufjjsjekkdemd
This service manual provides instructions for maintaining and repairing excavators models JS210 and JS230. It contains sections covering the machine components, safety procedures, and a description of the machine. The manual instructs technicians on safety during maintenance, operating procedures, and working on job sites. It also includes diagrams and specifications for repairs and replacements of parts.
Jcb js130 excavator service repair manual sn 2397429 and upufjjsjekkdemd
The document provides service information for excavator tracks. It includes sections on track components, checking track condition, adjusting track tension, removing and installing tracks, and storing tracks. The main components of the track system are identified and diagrams are provided showing typical track installations. Technical specifications are given for track tension, pin and bush wear limits, link height wear limits, and replacement thresholds. Procedures are outlined for checking track components for wear and damage.
Jcb js115 t3 excavator service repair manual sn 2397465 and upufjjsjekkdemd
The document provides service information for excavator tracks. It includes sections on track components, checking track condition, adjusting track tension, removing and installing tracks, and storing tracks. The main components described are the steel track chain, pins, bushes, links, and tensioning/idler wheel assembly. Instructions are given on inspecting wear of these parts and taking corrective actions such as adjusting, replacing, or turning the track pins and bushes. Technical specifications are also included for measuring track tension and wear limits of pins, bushes, and links.
Jcb 540 v180 telescopic handler service repair manual sn from 2460601 onwardsufjjsjekkdemd
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers systems like the engine, brakes, hydraulics, and electrical systems. The manual instructs technicians to study it before operating or maintaining the machine to prevent injury or death. It also contains sections on safety, maintenance procedures, technical specifications, and the removal and installation of components.
Jcb 540 v140 telescopic handler service repair manual sn from 2902000 onwardsufjjsjekkdemd
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 536 t70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 536 70 tier 4 telescopic handler service repair manual sn from 2336575 on...ufjjsjekkdemd
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for reinstalling injectors and seals.
Jcb 536 70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. Procedures are provided for maintenance, removal and installation of parts, and repair. Safety warnings are included throughout regarding working on and operating the machines.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2902000 on...ufjjsjekkdemd
This service manual provides instructions for servicing the components of a Loadall rough terrain variable reach truck, including the fuel injection system. The document discusses fuel injectors, injector seals, the common rail, and the high pressure fuel injection pump. Procedures are provided for checking injector operation, removing and installing injectors, removing and installing injector seals, removing and installing the common rail, and identifying components of the high pressure fuel injection pump. Safety information, required tools, and torque specifications are also included.
Jcb 536 60 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 535 t95 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 535 95 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 533 105 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 531 t70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 531 70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 250 skid steer loader service repair manual sn from 2476302 to 2477300ufjjsjekkdemd
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Hyundai R16-7 Mini Excavator Service Repair Manualufjjsjekkdemd
This is the Highly Detailed factory service repair manual for theHYUNDAI R16-7 MINI EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYUNDAI R16-7 MINI EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
1. Precautions on Maintenance
2. Outline
3. Attachment
4. Engine
5. Main Pump
6. Hydraulic Oil Filter
7. Control Valve
8. Joystick
9. Slew Motor
10. Travel Motor
11. Hydraulic Cylinder
12. Swivel Joint
13. Crawler
14. Spring Case and Grease Cylinder
15. Idler
16. Sprocket
17. Track Roller
18. Electrical Equipment
19. Troubleshooting
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYUNDAI R16-7 MINI EXCAVATOR Service Repair Workshop Manual.
Thanks for visiting!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. GROUP
INDEX
1 Specifications
2 Sectional View of Machine
3 Drive Schematic
4 Cutterbar
5 Threshing Mechanism
6 Elevators and Crop Delivery
7 Engine and Drives
8 Transmission and Chassis
9 Hydraulic System
10 Steering and Rear Axle
11 Electrical System
12 Auxiliary Equipment
Special Notes
4. DO 106 .... 56
1 SPECIFICATIONS DOMINATOR 106
Technical data 1. 1
Weights 1. 4
Dimensions 1. 5
Settings and capacities 1. 7
DOMINATOR 96
Technical data 1. 9
Weights 1.12
Dimensions 1.13
Settings and capacities 1.15
DOMINATOR 86
Technical data 1.17
Weights 1.20
Dimensions 1.21
Settings and capacities 1.23
DOMINATOR 76
Technical data 1.25
Weights 1.28
Dimensions 1.29
Settings and capacities 1.31
DOMINATOR 66
Technical data 1.33
Weights 1.36
Dimensions 1.37
Settings and capacities 1.39
DOMINATOR 56
Technical data 1.41
Weights 1.44
Dimensions 1.45
Settings and capacities 1.47
5. SPECIFICATIONS DOMINATOR 106
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes in design and
specifications at any time without previous
notice and rejects all responsibility in case
of errors.
NOTE: Front, rear, right and left refer to
direction of travel.
Cutterbar
Cutting widths
Height adjustment
Cutting height range
Clearance height under
cutterbar skid
Reel drive
Reel height adjustment
Feeder house
Cutterbar clutch
Threshing Equipment
Stone trap
Concave
Disawning
Threshing drum
Threshing mechanism clutch
DO 106 . .,. ,.56
To be sure, always compare settings and filling'
capacities with specifications stated in the
appropriate Operator's Manual for the machine
concerned.
3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50 m
(13ft) (15ft) t17ft) (19ft) (22ft) (25ft)
hydraulic
from 360 mm (14 1/4 in) below ground level
to 1300 mm (51 1/4 in) above ground level.
with floatation springs in use 950 mm (37 112 in)
with floatation springs blocked 1100 mm (43 1/2 in)
belt-operated variable speed drive
hydraulic
chain-type feed rake
hydraulic
standard equipment
adjustable from operator's platform
rear of concave separately adjustable (2nd lever)
width 1580 mm (621/4 in), 12 bars
disawning plates underneath the concave, two and three
disawning plates can be engaged separately
width 1580 mm (62 1/4 in)
diameter 450 mm (17 3/4 in)
six rasp bars, seven drum discs
speed infinitely variable from 650 to 1500 1/min (rpm)
Optional:
a) step pulley drive - 750, 1000, 1200, 1500 1Imin (rpm)
b) slow-speed threshing drum drive kit (chain drive)
from 290 to 680 1/min (rpm)
hydraulic
1.1
6. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
Straw Walkers
Type
No. of walker racks
No. of walker crankshafts
Speed of walker crankshafts
No. of tine crankshafts
No. of tines per crankshaft
Walker area
Separating area
Cleaning
Type
Wind volume control
Total cleaning area
Grain tank
Capacity
Unloading tube
Engines
Cubic capacity
Max. speed l/min (rpm)
Idle speed 1/min (rpm)
kW (DIN H.P.)
Cooling
Fuel tank capacity
Battery
1.2
step type walkers and intensive separation system
(crankshaft with tines)
six
two
220_5 1/min (rpm)
two
six
7.00 m2
(10 850 sq in)
7.95m2
(12322sqin)
forced air cleaning fan
by infinitely variable fan speed
additional fan shutters (optional)
5.10 m2
(7905 sq in)
6500 litres (178.75 U.K. bushels; 184.6 U.S. bushels)
hydraulically operated position control
Mercedes DM 401.901
10455 cm3
(638 in3
)
2390
1150
151 (205)
water
300 litres (66 Imp. gal, 79 U.S. gaU
12 Volt, 143 Ah
7. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
Ground drive
Transmission
Ground speeds in kilometers per hour
Forward travel
Reverse travel
Ground speeds in miles per hour
Forward travel
Reverse travel
Traction Wheel Drive
Steering
hydrostatic, controlled by lever on operator's platform
three gear ranges in either forward or reverse
1. and 2. gear range for field operations
3. gear range for road travel
on 23.1-26 R1 / 18.4-34 R1 tyres
1. from 0 to 6.1 km/h (from 0 to 7.7 km/h)
2. from 0 to 8.9 km/h (from 0 to 11.1 km/h)
3. from 0 to 20.0 km/h (from 0 to 25.5 km/h)
1. from 0 to 4.6 km/h (from 0 to 5.8 km/h)
2. from 0 to 6.6 km/h (from 0 to 8.8 km/h)
3. from 0 to 15.3 km/h (from 0 to 19.0 km/h)
on 23.1-26 R1 / 18.4-34 R1 tyres
1. from 0 to 3.8 mph (from 0 to 4.8 mph)
2. from 0 to 5.5 mph (from 0 to 6.9 mph)
3. from 0 to 12.4 mph (from 0 to 15.8 mph)
1. from 0 to 2.9 mph (from 0 to 3.6 mph)
2. from 0 to 4.1 mph (from 0 to 5.5 mph)
3. from 0 to 9.5 mph (from 0 to 11.8 mph)
Figures in brackets are only applicable for certain countries.
In countries with a speed limit of 20 km/h (12.4 mph) for
self-propelled machinery of husbandry, the hydrostatic drive
system incorporates a device that limits the ground speed
accordingly.
via final drive gears in oil bath
hydrostatic
Brakes
Tyres and Tyre Pressures
Foot brake
Hand brake
hydraulic, designed to work independently when the pedal
lock is removed
mechanical, independent of foot brakes
maximum minimum tyre pressure
tyre size tyre maize picker head grain cutterbar
pressure six-row five-row 7.50 m 6.60 m 5.70 m 5.10 m 4.50m 3.90m
four-row (25 ft) (22 ft) (19 ft) (17 ft) (15 ft) (13 ft)
bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi)
18.4-3414PR 3.3 (48) - 3.2 (46) 3.2 (46) 3.0 (43) 2.8 (41)
23.1-26 14 PR 2.5 (36) 2.5 (36) 2.3 (33) 2.3 (33) 2.1 (30) 1.9 (27)
28.1-26 12 PR 1.8 (26) 1.8 (26) 1.7 (25) 1.7 (25) 1.6 (23) 1.5 (22)
30.5-32 12 PR 1.5 (22) 1.2 (17) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16)
14.5/75-20 8 PR - 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43)
Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to
obtain the longest possible service life of the tyre.
Torque Settings of Wheel
Bolts and Wheel Nuts
Front wheels wheel nuts with thrust piece H 22
DIN 74361-10 =860 Nm (622 ft Ib)
Rear wheels wheel bolts M 18 x 1.5 =325 Nm (235 ft Ib)
1.3
8. DO 106 .... 56
SPECIFICATIONS DOMINATOR 106
Weights
Combine equipped with 18.4-34 Rl and 14.5/75-20
tyres, empty fuel tank and six cylinder engine:
Determine the total weight of the machine by adding
the weight of the equipment used on the combine to
the weight of the basic machine.
Basic machine (without cutterbar)
With cutterbar and spring tine reel
3.90 m (13 ft)
4.50 m (15 ft)
5.10 m (17 ft)
5.70 m (19 ft)
With bat-type reel
6.60 m (22 ft)
7.50 m (25 ft)
Two cpl. divider assemblies
With straw chopper
With four-row maize picker head
With five-row maize picker head
With six-row maize picker head
With maize head stalk chopper
With wheel weights (one set)
With liquid ballast (magnesium chloride solution) filled into tyres
With extra weights in compliance with road regulations (not for all countries)
Combine Dimensions
9060 kg (19974 Ib)
add 960 kg ( 2116 Ib)
add 1040 kg ( 2292 Ib)
add 1120 kg ( 2469 Ib)
add 1200 kg ( 2446 Ib)
add 1320 kg ( 2910 Ib)
add 1440 kg ( 3175 Ib)
add 50 kg ( 110 Ib)
add 284 kg ( 626 Ib)
add 1260 kg ( 2778 Ib)
add 1510 kg ( 3329 Ib)
add 1740 kg ( 3836 Ib)
add 250 kg ( 551 Ib)
add 104 kg ( 2291b)
add 254 kg ( 560 Ib)
add 300 kg ( 661 Ib)
Turning Diameter, conforming to DIN 70020 Specifications
Wheel Thread
Width over Tyres
Wheel Base
Ground Clearance
front
rear
on 18.4-34 tyres
on 23.1-26 14 PR tyres and
DW 20-26 wheels
on 28.1-26 tyres
adjustable axle
on 18.4-34 tyres
on 23.1-26 14 PR tyres and
DW 20-26 wheels
on 28.1-26 tyres
2510 mm (98 3/4 in)
2550 mm (100 1/2 in)
2780 mm (109 1/2 in)
2300 mm (90 1/2 in)
2980 mm (117 1/4 in)
3140 mm (123 1/2 in)
3500 mm (137 3/4 in)
3650 mm (143 3/4 in)
420 mm (16 1/2 in)
16800 mm (661 1/2 in)
1.4
9. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
~-----------L------------.....&
Operatjng Position
3760 mm (148 in)
add 415 mm ( 16 3/8 in)
3720 mm (146 1/2 in)
WIDTH B
HEIGHT H
Cutting width 3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50"m
(13 ft) (15ft) (17ft) (19 ft) (22ft) ("25ft)
Overall width 5565 mm 6175 mm 6785 mm 7395 mm 8310 mm 9225 mm
(219 in) (243 in) (267 1/4) (291 1/4) (327 1/4) (363 1/4 in)
Overall widths are with deflectors set out on each side by
600 mm (23 3/4 in).
With four-row (3 m) maize picker head 3260 mm (128 1/4 in)
With five-row maize picker head 4060 mm (159 3/4 in)
With six-row maize picker head 5200 mm (204 3/4 in)
To top of grain tank
When grain tank lid is open
To top of cab
To bottom edge of grain tank
unloading tube 4020 mm (158 1/4 in)
On 23.1-26 or 28.1-26 tyres the height dimensions are being
reduced by approx. 40 mm (1 1/2 in).
LENGTH L Without dividers
With hoop dividers
With long dividers
With short dividers
Witz maize picker head
, With straw hood back panel
adjusted to rearward position
With straw spreader
9190 mm (361 3/4 in)
9550 mm (376 in)
10540 mm (415 in)
10290 mm (405 in)
10220 mm (402 1/4"in)
add 300 mm ( 11 3/4 in)
add 500 mm ( 19 3/4 in)
1.5
10. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
.......-----------L--------------..
Transport Position
WIDTH B
HEIGHT H
Cutting width 3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50 m
(13ft) (15ft) (17ft) (19 ft) (22ft) (25ft)
Overall width 4365 mm 4975 mm 5585 mm 6195 mm 7110 mm 8025 mm
(171 3/4) (1953/4) (220 in) (244 in) (280 in) (315 in)
With cutterb6r detached 3000 mm (118 in)
With four-row (3 m) maize picker head 3000 mm (118 in)
With five-row maize pic.ker head 3800 mm (149 1/2 in)
With six-row maize picker head 4940 mm (194 1/2 in)
Ta top of grain tank 3760 mm (148 in)
Ta top of cab 3720 mm (146 1/2 in)
On 23.1-26 or 28.1-26 tyres the height dimensions are being
reduced by approx. 40 mm (1 1/2 in).
LENGTH L
1.6
With cutterbar detached
Without dividers
With hoop dividers
With long dividers
With short dividers
With maize picker head
7770 mm (306 in)
9290 mm (365 3/4 in)
9650 mm (380 in)
10640 mm (419 in)
10390 mm (409 in)
10320 mm (406 in)
11. SPECIFICATIONS DOMINATOR 106
SETTINGS AND CAPACITIES
Hydraulic Oil Pressures
Lift hydraulic system
pressure relief valve
Hydrostatic steering system
pressure relief valve
Hydrostatic ground drive:
(LINDE hydrostatic pump BPV 100 S)
Charge pressure
Operating pressure
(SAUER hydrostatic pump SPV 23)
Charge pressure
Operating pressure
Oil Capacities
Transmission gearbox
Final drive gearboxes
Lift hydraulic system
LINDE hydrostatic
ground drive system
SAUER hydrostatic ground
drive system
Engines
Slip clutches
Reel
Main table auger
Upper feed rake shaft
Returns elevator
180 bar (2610 psi)
90+5 bar (1305+72.5 psi)
16 bar ( 232 psi)
420 bar (6091 psi)
14 bar ( 203 psi)
420 bar (6091 psi)
5 litres (4.4 Imp. qt; 5.28 U.S. qt) SAE 90
(M IL-L-21 05 B) API-G L-5-90
Hypoid Transmission Oil
4 litres each (3.5 Imp. qt; 4.2 U.S. qt) SAE 90
(M IL-L-21 05 B) API-G L-5-90
Hypoid Transmission Oil
approx.7 litres (6.2 Imp.qt; 7.4 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DI N 51524) ISO-VG 68 Specifications
approx. 8 litres (7 Imp. qt; 8.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DI N 51524) ISO-VG 68 Specifications
consult engine instruction book and combine
operator's manual
200 Nm (145 ft Ib)
200 Nm (145 ft Ib)
220 Nm (159 ft Ib)
adjust ratchet clutch so that no play exists
DO 106 .... 56
1.7
12. DO 106 .... 56
SPECIFICATIONS DOMINATOR 106
Shear Bolt
Grain tank unloading system
Knife Register
Reel
Basic setting
Main table auger
Basic setting
Concave
Control (initial) setting
M 10 x 45 DIN 931-8.8
the center of the knife sections should line up with the center
of the cutterbar fingers at each end of the knife stroke
reel drive shaft placed vertically over the knife. The tines
should be adjusted to vertical position.
approx. 15 mm (19/32 in) clearance between auger flights
and bottom of cutterbar
concave entrance: 13 mm (1/2 in)
clearance measured at third concave bar
concave exit:
concave main
adjusting lever:
concave rear
adjusting lever:
3 mm (1/8 in)
clearance measured at third last concave
bar
locked in 3rd hole of quadrant
locked in 1st hole of quadrant
(e = narrow)
Brakes
Steering
1.8
Foot brake
Hand brake
brake must grip when the pedal is depressed through one
third of its total travel
brake should be effective with the..hand-l-e·locked in the first
three to four teeth in the segment
with the steering cylinder piston rod fully extended, the
adjustable stop bolts must be contacting the steering arms
13. DO 106 .... 56
SPECIFICATIONS DOMINATOR 96
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes in design and
specifications at any time without previous
notice and rejects all responsibility in case
of errors.
NOTE: Front, rear, right and left refer to
direction of travel.
To be sure, always compare settings and filling
capacities with specifications stated in the
appropriate Operator's Manual for the machine
concerned.
5.70 m
(19 ft)
5.10 m
(17 ft)
4.50 m
(15 ft)
3-.90 m
(13 ft)
3.60 m
(12 ft)
hydraulic
from 360 mm (14 114 in) below ground level
to 1300 mm (51 114 in) above ground level
with floatation springs in use 925 mm (36 112 in)
with floatation springs blocked 1075 mm (42 114 in)
belt-operated variable speed drive
hydraulic
chain-type feed rake
belt-operated
Height adjustment
Cutting height range
Clearance height under
cutterbar skid
Reel drive
Reel height adjustment
Feeder house
Cutterbar clutch
Cutterbar
Cutting widths
Threshing Equipment
Stone trap
Concave
Disawning
Threshing drum
standard equipment
adjustable from operator's platform
rear of concave separately adjustable (2nd lever)
width 1320 mm (52 in), 12 bar
disawning plates underneath the concave, two and
three disawning plates can be engaged separately
width 1320 mm (52 in)
diameter 450 mm (17 3/4 in)
six rasp bars, six drum discs
speed infinitely variable from 650 to 1500 1Imin (rpm)
Threshing mechanism clutch
Optional:
a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm)
a1) additional speed 650 1/min (rpm)
b) slow speed threshing drum drive kit, 3-speed chain
drive: 300, 430 and 550 1/min (rpm)
belt-operated
1.9
14. 00 106 .... 56
SPECIFICATIONS DOMINATOR 96
Straw Walkers
Type
No. of walker racks
No. of walker crankshafts
Speed of walker crankshafts
No. of tine crankshafts
No. of tines per crankshaft
Walker area
Separating area
Cleaning
Type
Wind volume control
Total cleaning area
Grain tank
Capacity
Unloading tube
Engine
Cubic capacity
Max. speed 1Imin (rpm)
Idle speed 1Imin (rpm)
kW (DIN H.P.)
Cooling
Fuel tank capacity
Battery
Ground Drive
a) Mechanical
Clutch
Transmission
Speed range
1.10
step type walkers and intensive separation system
(crankshaft with tines)
five
two
220_5 1/min (rpm)
two
five
5.80 m2
(8990 sq in)
6.60 m2
(10230 sq in)
forced air cleaning fan
by infinitely variable fan speed
additional fan shutters (optional)
4.25 m2
(6588 sq in)
5200 litres (143 Imp. bushels, 147.7 U.S. bushels)
hydraulically operated position control
Mercedes OM 352 A
5675 cm3 (346 in3 )
2600
1150
110 (150)
water
300 litres (66 Imp. gal, 79 U.S. gal)
12 Volt, 110 Ah
variable ground speed, hydraulically controlled
dry single disc clutch
three forward, one reverse gear
on 23.1-26 R 1 tyres
1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph)
2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph)
3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph)
R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph)
15. DO 106 .... 56
SPECIFICATIONS DOMINATOR 96
b) Hydrostatic
Transmission
Ground speeds in kilometers per hour
Forward travel
Reverse travel
Ground speeds in miles per hour
Forward travel
Reverse travel
Traction Wheel Drive
Steering
controlled by lever on operator's platform
three gear ranges in either forward or reverse
1. and 2. gear range for field operation
3. gear range for road travel
on 23.1-26 R1 tyres
1. from 0 to 5.4 km/h (from 0 to· 6.8 km/h)
2. from 0 to 9.9 km/h (from 0 to 12.6 km/h)
3. from 0 to 19.9 km/h (from 0 to 25.3 km/h)
1. from 0 to 4.0 km/h (from 0 to 4.9 km/h)
2. from 0 to 7.4 km/h (from 0 to 8.9 km/h)
3. from 0 to 15.0 km/h (from 0 to 18.0 km/h)
on 23.1-26 R1
1. from 0 to 3.4 mph (from 0 to 4.2 mph)
2. from 0 to 6.2 mph (from 0 to 7.8 mph)
3. from 0 to 12.4 mph (from 0 to 15.7 mph)
1. from 0 to 2.5 mph (from 0 to 3.0 mph)
2. from 0 to 4.6 mph (from 0 to 5.5 mph)
3. from 0 to 11.2 mph (from 0 to 11.2 mph)
Figures in brackets are only applicable for certain countries.
In countries with a speed limit of 20 km/h (12.4 mph) for
self-propelled machinery of husbandry, the hydrostatic drive
system incorporates a device that limits the ground speed
accordingly.
via final drive gears in oil bath
hydrostatic
Brakes
Tyres and Tyre Pressures
Foot brakes
Hand brake
hydraulic, designed to work independently when the pedal
lock is removed
mechanical, independent of foot brake
maximum minimum tyre pressure
tyre maize picker head grain cutterbar
tyre sizes pressure six-row five-row 5.70 m 5.10 m 4.50m 3.90m 3.60 m
four-row (19 ft) (17 ft) (15 ft) (13 ft) (12 ft)
and up
bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi)
18.4-34 14 PR 3.3 (48) 3.1 (45) 3.0 (43) 3.0 (43) 2.8 (41) 2.6 (38)
23.1-2612PR 2.1 (30) 2.1 (30) 2.0 (29) 2.0 (29) 1.9 (27) 1.7 (25)
23.1-26 14 PR 2.5 (36) 2.1 (30) 2.0 (29) 2.0 (29) 1.9 (27) 1.7 (25)
28.1-26 12 PR 1.8 (26) 1.6 (23) 1.6 (23) 1.6 (23) 1.5 (22) 1.4 (20)
30.5-3210PR 1.5 (22) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16)
12.5/80-18 6 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39)
12.5/80-18 10 PR - 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43)
14.5/75-20 8 PR - 2.4 (35) 2.4 (35) 2.4 (35) 2.4 (35) 2.4 (35)
Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to
obtain the longest possible service life of the tyre.
Torque Settings of Wheel
Nuts and Wheel Bolts
Front wheels wheel nuts with thrust piece H 22
DIN 74361-10 = 520 Nm (376 ft Ib)
Rear wheels wheel bolts M 18 x 1.5 =325 Nm (235 ft Ib)
1.11
16. DO 106 .... 56
'SPECIFICATIONS DOMINATOR 96
Weights
Combine equipped with 23.1-26 R1 and 12.5/80-18
15 tyres, empty fuel tank and six cylinder engine:
Determine the total weight of the machine·by adding
the weight of the equipment used on the combine to
the weight of the basic machine.
Basic machine (without cutterbar)
With cutterbar and spring tine reel
3.60 m (12 ft)
3.90 m (13 ft)
4.50 m (15 ft)
5.10 m (17 ft)
5.70 m (19 ft)
Two cpl. divider assemblies
With straw chopper
With cab and ventilating system
With four-row maize picker head
With five-row maize picker head
With six-row maize picker head
With maize head stalk chopper
With wheel weights (one set)
With liquid ballast (magnesium chloride solution) filled into tyres
With extra weights in compliance with road regulations
(not for all countries)
Combine Dimensions
7432 kg (16385 Ib)
add 920 kg ( 20281b)
add 960 kg ( 2116 Ib)
add 1040 kg ( 22931b)
add 1120 kg ( 2469 Ib)
add 1200 kg ( 2646 Ib)
add 50 kg ( 11 0 Ib)
add 264 kg ( 582 Ib)
add 260 kg ( 573 Ib)
add 1260 kg ( 2778 Ib)
add 1510 kg ( 3329 Ib)
add 1740 kg ( 3836 Ib)
add 250 kg ( 551 Ib)
add 104 kg ( 229 Ib)
add 210 kg ( 4631b)
add 300 kg ( 661 Ib)
Turning Diameter, conforming to DIN 70020 Specifications
Wheel Tread
Width over Tyres
Wheel Base
Ground Clearance
front
rear
on 23.1-26 12 PR tyres
and DW 16-26 wheels
on 23.1-26 14 PR tyres
and DW 20-26 wheels
on 18.4-34 tyres
on 28.1-26 tyres
wide axle
adjustäble axle
on 23.1-26 12 PR tyres
and DW 16-26 wheels
on 23.1-26 14 PR tyres
and DW 20-26 wheels
on 18.4-34 tyres
on 28.1-26 tyres
2450 mm (96 1/2 in)
2550 mm (100 1/2 in)
2510 mm (98 3/4 in)
2780 mm (109 1/2 in)
2050 mm (80 3/4 in)
2300 mm (90 1/2 in)
2500 mm (98 1/2 in)
2700 mm (106 1/4 in)
3000 mm (118 in)
3140 mm (123 1/2 in)
2980 mm (117 1/4 in)
3500 mm (137 3/4 in)
3650 mm (143 3/4 in)
420 mm (16 1/2 in)
16800 mm (661 1/2 in)
1.12
17. Da 106 .... 56
SPECIFICATIONS DOMINATOR 96
.......-----------L--------------..
Operating Position
WIDTH B Cutting width 3.60 m 3.90 m 4.50 m 5.10 m 5.70 m
(12ft) (13ft) (15ft) (17ft) (19ft)
Overall width 5190 mm 5565 mm 6175 mm 6785 mm 7395 mm
(204 1/4 in) (219 in) (243 in) (267 1/4 in) (291 1/4 in)
Overall widths are with deflectors set out on each side by
600 mm (23 3/4 in).
With four-row (3 m) maize picker head 3260 mm (128 1/4 in)
With five-row maize oicker head 4060 mm (159 3/4 in)
With six-row maize picker head 5200 mm (204 3/4 in)
HEIGHT H
LENGTH L
Ta top of grain tank
When grain tank lid is open
To top of cab
To bottom edge of gran tank
Without dividers
With hoop dividers
With long dividers
With short dividers
With maize picker head
With straw hood back panel
adjusted to rearward position
With straw spreader
3720 mm (146 1/2 in)
add 415 mm ( 16 11/32 in)
3680 mm (144 3{4 in)
3530 mm (139 in)
9190 mm (361 3/4 in)
9550 mm (376 in)
10540 mm (415 in)
10290 mm (405 in)
10220 mm (402 1/4 in)
add 300 mm (11 3/4 in)
add 500 mm (19 3/4 in)
1.13
18. 00 106 .... 56
SPECIFICATIONS DOMINATOR 96
...---- B------.e
Transport Position
......- - - - - - - - - - - L---------------l..
WIDTH B Cutting width 3.60 m 3.90 m 4.50 m 5.10 m 5.70 m
(12ft) (13 ft) (15ft) (17ft) (19 ft)
Overall width 3990 mm 4365 mm 4975 mm 5585 mm 6195 mm
(157 in) (171 3/4) '( 195 3/4) (220 in) (244 in)
With cutterbar detached 3000 mm (118 in)
With four-row (3 m) maize picker head 3000 mm (118 in)
With five-row maize picker head 3800 mm (149 1/4 in)
With six-row maize picker head 4940 mm (194 1/2 in)
HEIGHT L
LENGTH L
1.14
To top of grain tank
To top of cab
With cutterbar detached
Without dividers
With hoop dividers
With long dividers
With short dividers
With maize picker head
3720 mm (146 1/2 in)
3680 mm (144 3/4 in)
7770 mm (306 in)
9290 mm (365 3/4 in)
9650 mm (380 in)
10640 mm (419 in)
10390 mm (409 in)
10320 mm (406 1/4 in)
19. SPECIFICATIONS DOMINATOR 96
SETTINGS AND CAPACITIES
Hydraulic Oil Pressures
Lift hydraulic system
pressure relief valve
Hydrostatic steering system
pressure relief valve
Hydrostatic ground drive:
(LINDE hydrostatic pump BPV 70 S)
Charge pressure
Operating pressure
(SAUER hydrostatic pump SPV 22)
Charge pressure
Operating pressure
Oil capacities
Transmission gearbox
Final drive gearboxes
Lift hydraulic system
LI NDE hydrostatic
ground drive system
SAUER hydrostatic
ground drive system
Engines
Slip clutches
Reel
Main table auger
Upper feed rake shaft
Returns elevator
180 bar (2610 psi)
90+5 bar (1305+72.5 psi)
16 bar ( 232 psi)
420 bar (6091 psi)
14 bar ( 203 psi)
420 bar (6091 psi)
• 6 litres (5.3 Imp. qt; 6.3 U.S. qt) SAE 90
(M IL-L-21 05) API-G L-4-90
Transmission Oil
3 litres each (2.6 Imp. qt; 3.2 U.S. qt) SAE 90
(MIL-L-2105) API-GL-4-90
Transmission Oil
approx.6 litres (5.3 Imp. qt, 6.3 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
approx. 8 litres (7 Imp. qt; 8.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
consult engine instruction book and combine
operator's manual
200 Nm (145 ft Ib)
200 Nm (145 ft Ib)
220 Nm (159 ft Ib)
adjust ratchet clutch so that no play exists
DO 106 .... 56
1.15
20. 00 106 .... 56
SPECIFICATIONS DOMINATOR 96
Shear Bolt
Grain tank unloading system
Knife Register
Reel
Basic setting
Main table auger
Basic setting
Concave
Control (initial) setting
M 10 x 45 DIN 931-8.8
the center of the knife sections should line up with the center
of the cutterbar fingers at each end of the knife stroke
reel drive shaft placed vertically over the knife. The tines
should be adjusted to vertical position.
approx. 15 mm (19/32 in) clearance between auger flights
and bottom of cutterbar
concave entrance: 13 mm (1/2 in)
clearance measured at third concave bar
concave exit:
concave main
adjusting lever:
concave rear
adjusting lever:
3 mm (1/8 in)
clearance measured at third last concave
bar
locked in 3rd hole of quadrant
locked in 1st hole of quadrant
(e =narrow)
Brakes
Steering
1.16
Foot brake
Hand brake
brake must grip when the pedal is depressed through one third
of its total travel
brake should be effective with the handle locked in the first
three to four teeth in the segment.
with the steering cylinder piston rod fully extended, the
adjustable stop bolts must be contacting the steering arms
21. DO 106 .... 56
SPECIFICATIONS DOMINATOR 86
TechniCaI data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes in design and
specifications at any time without previous
notice and ejects all responsibilit'! in case
of errors.
NOTE: Front, rear, right and left refer to
direction of travel.
To be sure, always compare settings and filling
capacities with specifications stated in the
appropriate Operator's Manual for the machine
concerned.
5.70 m
(19 ft)
5.10 m
(17 ft)
4.50m
(15 ft)
3.90 m
(13 ft)
3.60 m
(12 ft)
hydraulic
from 360 mm (14 1/4 in) below ground level
to 1300 mm (51 114 in) above ground level
with floatation springs in use 900 mm (35 1/2 in)
with floatation springs blocked 1040 mm (41 in)
belt-operated variable speed drive
hydraulic
chain-type feed rake
belt-operated
Height adjustment
Cutting height range
Cutterbar
Cutting widths
Clearance height under
cutterbar skid
Reel drive
Reel height adjustment
Feeder house
Cutterbar clutch
Threshing Equipment
Stone trap
Concave
Disawning
Threshing drum
standard equipment
adjustable from operator's platform
rear of concave separately adjustable (2nd lever)
width 1320 mm (52 in), 12 bar
disawning plates underneath the concave, two and
three disawning plates can be engaged separately
width 1320 mm (52 in)
diameter 450 mm (17 3/4 in)
six rasp bars, six drum discs
speed infinitely variable from 650 to 1500 1/min (rpm)
Threshing mechanism clutch
Optional:
a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm)
a1) additional speed 650 1/min (rpm)
b) slow speed threshing drum drive kit, 3-speed chain
drive: 300, 430 and 550 1/min (rpm)
belt-operated
1.17
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. 00 106 .... 56
SPECIFICATIONS DOMINATOR 86
Straw Walkers
Type
No. of walker racks
No. of walker crankshafts
Speed of walker crankshafts
No. of tine crankshafts
No. of tines per crankshafts
Walker area
Separating area
Cleaning
Type
Wind volume control
Total cleaning area
Grain tank
Capacity
Unloading tube
step typ walkers and intensive separation system
(crankshaft with tines)
five
two
220_5 1/min (rpm)
two
five
5.15 m2
(7982.5 sq in)
5.95 m2 (9222.5 sq in)
forced air cleaning fan
by infinitely variable fan speed
additional fan shutters (optional)
4.25 m2
(6588 sq in)
4600 Iitres (126.5 Imp. bushels; 130.6 U.S. bushels)
hydraulically operated position control
Engines
Cubic capacity
Max. speed 1Imin (rpm)
Idle speed 1/min (rpm)
kW (DIN H.P.)
Cooling
Mercedes OM 352
5675 cm3 (346 in3 )
2600
1150
88 (120)
water
Perkins 6.3724
6100 cm3
(372 in3
)
2600
1150
88 (120)
water
Fuel tank capacity
Battery
1.18
300 Iitres (66 Imp. gal; 79 U.S. gal)
12 Volt, 110 Ah
24. DO 106 .... 56
SPECIFICATIONS DOMINATOR 86
Ground Drive
a) Mechanical
Clutch
Transmission
Speed range
Traction Wheel Drive
Steering
Brakes
Tyres and Tyre Pressures
Foot brake
Hand brake
variable ground speed, hydraulically controlled
dry single disc clutch
three forward, one reverse gear
on, 18.4-30 R1 /.23.1-26 R1 tyres
1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph)
2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph)
3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph)
R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph)
via final drive gears in oil bath
hydrostatic
hydraulic, designed to work independently when the pedal
lock is removed
mechanical, independent of foot brake
maximum minimum tyre pressure
tyre size tyre maize picker head grain cutterbar
pressure six-row five-row 5.70 m 5.10 m 4.50m 3.90 m 3.60 m
four-row (19 ft) (17 ft) (15 ft) (13 ft) (12 ft)
bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi)
18.4-30 12 PR 2.9 (42) - - - - 2.9 (42)
18.4~34 12 PR 2.9 (42) - 2.9 (42) 2.9 (42) 2.5 (36) 2.4 (35)
23.1-26 12 PR 2.1 (30) 2.0 (29) 1.9 (27) 1.9 (27) 1.7 (25) 1.6 (23)
28.1-26 12 PR 1.8 (26) 1.5 (22) 1.5 (22) 1.5 (22) 1.1 (16) 1.1 (16)
12.5/80-18 6 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39)
12.5/80-18 10 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39)
14.5/75-20 8 PR - 2.0 (29) 2.0 (29) 2.0 (29) 2.0 (29) 2.0 (29)
Where ground conditions allow maximum tyre_pressure, the maximLam tyre pressure should be maintained in order to
obtain the longest possible service of the tyre.
Torque Settings of Wheel
Bolts and Wheel Nuts
Front wheels with flange nuts M22 x 1.5
and special washer (Limes) C 22.5 DIN 74361
= 520 Nm (376 ft lb)
Rear wheels M 18 x 1.5 wheel bolts = 325 Nm (235 ft lb)
1.19
25. DO 106 .... 56
SPECIFICATIONS DOMINATOR 86
Weights
Combine equipped with 18.4-30 R1 and 12.5/80-18
Impl. tyres, empty fuel tank, six cylinder engine.
Determine the total weight of the machine by adding
the weight of the equipment used on the combine
to the weight of th"e basic machine.
Basic machine (without cutterbar)
With long lip cutterbar and spring tine reel
3.60 m (12 ft)
3.90 m (13 ft)
4.50 m (15 ft)
5.10m(17ft)
5.70 m (19 ft)
Two cpl. divider assemblies
With straw chopper
With cab and ventilating system
With four-row maize picker head
With five-row maize picker head
With six-row maize picker head
With maize head stalk chopper
With wheel vveights (one set)
With liquid ballast (magnesium chloride solution) filled into
12.5/80-18 rear tyres
With extra weights in compliance with road regulations
(not for all countries)
Combine Dimensions
7170 kg (15807 Ib)
add 920 kg ( 20281b)
add 960 kg ( 2116 Ib)
add 1040 kg ( 2293 Ib)
add 1120 kg ( 24691b)
add 1200 kg ( 2646 Ib)
add 50 kg ( 110 Ib)
add 264 kg ( 5821b)
add 260 kg ( 5731b)
add 1260 kg ( 27781b)
add 1510 kg ( 33291b)
add 1740 kg ( 3836 Ib)
add 250 kg ( 551 Ib)
add 104 kg ( 2291b)
add 210 kg ( 4631b)
add 300 kg ( 661 Ib)
Wheel Tread
Width over Tyres
Wheel Base
Ground Clearance
front
rear
on 18.4-30 tyres
on 23.1-26 tyres
on 18.4-34 tyres
wide rear axle
adjustable rear axle
on 18.4-30 tyres
on 23.1-26 tyres
on 18.4-34 tyres
2522 mm (99 1/4 in)
2450 mm (96 1/2 in)
2510 mm (99 in)
2050 mm (80 3/4 in)
2300 mm (90 1/2 in)
2500 mm (98 1/2 in)
2700 mm (106 1/4 in)
2967 mm (116 3/4 in)
2985 mm (117 1/2 in)
2975 mm (117 in)
3650 mm (143 3/4 in)
380 mm (15 in)
Turning Diameter, conforming to DIN 70020 Specifications
1.20
15900 mm (626 in)