Buy now JCB JS205LC tracked excavator in India and get yourselves a state-of-the-art excavator made through using advance technology and in terms of reliability and durability the JCB JS205LC tracked excavator comes with Use of robust cast ends and pivot bosses provide strength and durability to boom and arm.
Jcb tm320 telescopic wheel loader service repair manual sn from 2508700 to 25...udfjjsjekkemm
This document provides instructions for disassembling and assembling the master clutch of a loader transmission. The summary steps for disassembly are:
1. Remove the clutch cover and discard the O-rings and oil seal.
2. Install locking plates and remove the clutch drum, pressure plate, and clutch plates.
3. Remove the plate carrier and thrust washers.
The summary steps for assembly are:
1. Install a new oil seal using a mandrel and lubricate and install new O-rings on the cover.
2. Assemble the clutch plates and carrier on a bench then insert into the housing using retainers.
3. Install the clutch drum, pressure plate,
This document provides a lifting plan, risk assessment, and method statement for lifting operations. It includes details of the load, cranes, lifting accessories, hazards identified, risk assessment, responsibilities of personnel, and acceptance signatures. The key details are the load weight and dimensions, crane models and capacities, identified hazards like overhead power lines, and the sequence of operations. Personnel roles like appointed person, slinger, and crane supervisor are defined. Weather limits and ground conditions are also addressed.
Este documento fornece instruções de segurança para operadores de empilhadeiras. Detalha (1) as características e funções das empilhadeiras, (2) procedimentos seguros para operação, manutenção e armazenamento de cargas, e (3) riscos associados e medidas preventivas. O objetivo é promover o uso seguro das empilhadeiras e a proteção dos operadores e pedestres.
This service manual provides information for servicing EP16KT, EP18KT, and EP20KT models. It contains 12 sections covering general information, electrical components, powertrain, brakes, steering, hydraulics, masts, service data, and options. The electrical components section describes the console box functions, components, key switch, lighting, joystick operation, and troubleshooting.
The document is a departmental health and safety inspection checklist used to inspect various areas and ensure compliance with health and safety requirements. It contains 15 sections to inspect items like the working environment, housekeeping, material storage, electrical, fire safety, chemicals, and more. The purpose is to identify any issues and actions needed to address deficiencies. It is the responsibility of the head of department to ensure any comments or deficiencies noted in the inspection are addressed.
Development milestones and the early years learning framework and the nationa...Dr Lendy Spires
This document provides developmental milestones and examples of how they relate to the Early Years Learning Framework (EYLF) and National Quality Standards (NQS) for children from birth to 8 months. It outlines key physical, social, emotional, cognitive, and language milestones and gives examples of how early childhood educators can link observations of children's development to the EYLF learning outcomes and NQS quality areas to enrich their understanding and support for children's learning and growth. Educators are encouraged to use the milestones as a reference rather than checklist and to seek advice if concerned about a child's development.
MacBook Air- Mirror on promethean activ boardshthornt
To mirror a laptop display to a Promethean board, disconnect the VGA and USB cables from the board and connect them to the laptop instead. In system preferences, select the "Mirror Displays" option under the Display tab to duplicate the laptop screen onto the larger board screen. The laptop resolution may change but will return to normal once unplugged, and 1344x1008 often provides the best display on the Promethean board.
Jcb tm320 telescopic wheel loader service repair manual sn from 2508700 to 25...udfjjsjekkemm
This document provides instructions for disassembling and assembling the master clutch of a loader transmission. The summary steps for disassembly are:
1. Remove the clutch cover and discard the O-rings and oil seal.
2. Install locking plates and remove the clutch drum, pressure plate, and clutch plates.
3. Remove the plate carrier and thrust washers.
The summary steps for assembly are:
1. Install a new oil seal using a mandrel and lubricate and install new O-rings on the cover.
2. Assemble the clutch plates and carrier on a bench then insert into the housing using retainers.
3. Install the clutch drum, pressure plate,
This document provides a lifting plan, risk assessment, and method statement for lifting operations. It includes details of the load, cranes, lifting accessories, hazards identified, risk assessment, responsibilities of personnel, and acceptance signatures. The key details are the load weight and dimensions, crane models and capacities, identified hazards like overhead power lines, and the sequence of operations. Personnel roles like appointed person, slinger, and crane supervisor are defined. Weather limits and ground conditions are also addressed.
Este documento fornece instruções de segurança para operadores de empilhadeiras. Detalha (1) as características e funções das empilhadeiras, (2) procedimentos seguros para operação, manutenção e armazenamento de cargas, e (3) riscos associados e medidas preventivas. O objetivo é promover o uso seguro das empilhadeiras e a proteção dos operadores e pedestres.
This service manual provides information for servicing EP16KT, EP18KT, and EP20KT models. It contains 12 sections covering general information, electrical components, powertrain, brakes, steering, hydraulics, masts, service data, and options. The electrical components section describes the console box functions, components, key switch, lighting, joystick operation, and troubleshooting.
The document is a departmental health and safety inspection checklist used to inspect various areas and ensure compliance with health and safety requirements. It contains 15 sections to inspect items like the working environment, housekeeping, material storage, electrical, fire safety, chemicals, and more. The purpose is to identify any issues and actions needed to address deficiencies. It is the responsibility of the head of department to ensure any comments or deficiencies noted in the inspection are addressed.
Development milestones and the early years learning framework and the nationa...Dr Lendy Spires
This document provides developmental milestones and examples of how they relate to the Early Years Learning Framework (EYLF) and National Quality Standards (NQS) for children from birth to 8 months. It outlines key physical, social, emotional, cognitive, and language milestones and gives examples of how early childhood educators can link observations of children's development to the EYLF learning outcomes and NQS quality areas to enrich their understanding and support for children's learning and growth. Educators are encouraged to use the milestones as a reference rather than checklist and to seek advice if concerned about a child's development.
MacBook Air- Mirror on promethean activ boardshthornt
To mirror a laptop display to a Promethean board, disconnect the VGA and USB cables from the board and connect them to the laptop instead. In system preferences, select the "Mirror Displays" option under the Display tab to duplicate the laptop screen onto the larger board screen. The laptop resolution may change but will return to normal once unplugged, and 1344x1008 often provides the best display on the Promethean board.
This document provides detailed specifications and dimensions for a tracked excavator. It includes information on the excavator's operating weight, engine power, hydraulic system, undercarriage, swing system, cab features, and bucket/attachment compatibility. Dimensional data is provided for the excavator body and various attachments in both metric and imperial units. Performance specs are given for digging reach, digging depth, dumping height, and tearout forces depending on attachment configuration.
The document provides specifications for the 10BOP and 13BOP order picker models from Hyundai, including their lifting capacities, dimensions, performance characteristics, electrical and hydraulic components, control systems, safety features, maintenance access, and warranty information. It also briefly outlines some new models being added to Hyundai's forklift line.
The JOY Quadbolter is a track-mounted roofbolter fitted with two boom assemblies that each carry an operator platform and two roofbolting units. It can operate in heights from 7.5 to 14.7 feet and bolts roofs at a rate of up to 25 bolts per hour. The quadbolter incorporates an inbuilt temporary roof support and has hydraulic, traction, bolting, water, electric, and control systems to operate autonomously.
Helimo for Skid-Type Helicopter Tugs from GermanyAbdo Ali
The document provides technical specifications for the Helimo IV-H helicopter lifting device. It can lift helicopters up to 5.5 tons using forks that are inserted under the helicopter skids from the front, back, or sides. It is operated via a remote control and has features like lights and a public address system to assist with loading and unloading helicopters. The document includes details on its dimensions, weight, battery system, drive motors, braking, and control panel.
Walkie type electric pallet truck cbd20 k(d)Amber Dai
The document summarizes the features of an electric pallet truck. It has an advanced AC control system that requires minimal maintenance. It has an intelligent regenerative brake system that increases performance by decreasing battery charge intervals. It has a side-way battery with a roll-out system that is convenient for replacing batteries. It also has safety features like an emergency reversing device and overload protection. The structure is waterproof and dustproof with a small turning radius. It has serviceability features like low battery protection and CANbus technology that reduces wiring complexity.
The document describes an electric pallet truck. It lists the truck's specifications and features. It has an advanced AC control system that requires minimal maintenance. It has a side-way battery that can be easily replaced using a roll-out system. The truck also has an emergency reversing device, overload protection, stepless speed control, and other safety and productivity features. It has a compact design with a small turning radius and is water-proof and dust-proof. It is designed for durability with reinforced structures and components that are easy to service.
The document provides specifications for the Yanmar 1GM10 marine diesel engine and its associated gear and instrumentation options. The 1GM10 is a small single-cylinder 4-stroke diesel engine that produces 6.7 kW at 3600 rpm. It has an indirect injection combustion system and natural aspiration. Standard instrumentation includes alarms and gauges. The engine can be paired with different gear options like the KM2P-1 gear or a saildrive to turn a propeller. Performance curves are provided to show output and fuel consumption at varying engine speeds.
The document provides specifications for a Hydraulic Crawler Crane model BMS1200HD, including:
1) Its maximum lifting capacity is 120 tons at a 5 meter radius, with a maximum crane boom length of 61 meters.
2) It lists the engine, hydraulic, and electrical systems specifications.
3) Dimensions, weights, and ground pressure are specified.
4) Boom arrangement options and their lengths are displayed in a table.
This document provides specifications for two models of articulating boom lifts from JLG Industries: the 800A and 800AJ. It lists key features such as a 6-foot articulating jib and 180-degree hydraulic platform rotator. Accessories and options include different platform sizes and mesh rail extensions. The document provides details on the lifts' reach, capacity, dimensions, performance, and powertrain options. It concludes by noting JLG's exclusive 1-and-5-year warranty coverage for structural components.
Alat beratku.blogspot.com 8000-1-product-guide-imperialVonita Allena
This document provides specifications and details for the Manitowoc 8000-1 crane. Key information includes:
- The crane has an 80 US ton capacity, 200 ft heavy-lift boom, and can reach a maximum of 180 ft with a 60 ft jib attachment for a total of 240 ft.
- It is powered by a 285 HP engine and has a maximum line speed of 525 fpm and rated line pull of 17,000 lbs.
- Additional specifications cover dimensions, components like the boom, counterweights, engine, and performance data for the winches and load charts.
- Charts and diagrams show the crane's range of motion, dimensions, component weights and specifications
This document provides specifications for an up 75 T3 RT crane. It has a rectangular boom made from strong steel that is lightweight. Its inverted outriggers and jacks protect components from debris. Maintenance components are easily accessible. It has a cab with good visibility and controls. Sensors monitor the working area and load limits. Additional details provided include the boom configuration, extensions, capacities, engine, chassis, and other technical specifications.
The Eicher 11.10 remains "The Best Selling- Value for Money Truck" in LCV category on strength of its high mileage, highest rated payload, efficient turnaround and low maintenance.
The document describes the Eicher 11.10 truck. It has the highest payload capacity and best fuel efficiency in its category. It can carry up to 8 tons of payload and gets higher mileage than competitors. It also has a longer 20-foot cargo body option. The truck remains very popular for its low maintenance costs, driving comfort, and ability to deliver high value for money over its lifetime. Key features include a powerful engine, heavy-duty axles, air brakes, and a reinforced cabin for safety.
The Grundfos DW pumps form part of a complete range of wastewater and sewage
handling products. Like all Grundfos products the DW pump series offer unique cus-
tomer benefits, making them the natural choice for any job where raw water needs to
be pumped - whether from construction sites, mining pits, excavations, or flooded base-
ments, etc.
This document provides specifications for the Yanmar 4LHA-STP marine diesel engine. It is a 4-stroke, turbocharged inline 4-cylinder engine with a displacement of 3.455 liters that produces up to 177 kW of power at 3300 rpm. It has a freshwater cooling system and enclosed lubrication system. Optional equipment includes different instrument panels, exhaust configurations, and marine gearboxes that can provide propeller speeds between 1976 rpm and 1230 rpm. Performance curves provide additional information on output, torque, fuel consumption, and recommended propeller sizes.
The document summarizes the features of a FullElectricStacker truck. It has the following key features:
1. It uses an AC motor that eliminates carbon brush replacement and has a multi-function display to show battery level, fault codes, hours of use, and speed level.
2. It has safety features like an emergency reversing device, auto deceleration, overspeed protection, and emergency power disconnect.
3. It is designed for stability with a low center of gravity, vertical drive wheel, waterproof motor, and exchangeable mast and frame components.
4. Serviceability is improved through low battery protection, concentrated electronic components, CANbus wiring, and hall sensors that increase component life
The document summarizes the features of a FullElectricStacker truck. It has an AC motor that eliminates carbon brush replacement. It has multi-function displays and emergency safety features. The structural design has a low center of gravity for stability, vertical drive wheel for easy maintenance, and removable mast and frame parts. The electrical components use CANbus technology for reliability.
This document provides specifications for a hydraulic crawler crane model CKE900-1F, including:
- A maximum lifting capacity of 90 metric tons at 3.4 meters for the crane boom and 10.9 metric tons at 18 meters for the fixed jib.
- The crane boom has a maximum length of 61 meters and the maximum fixed jib combination is 51.8 meters plus 18.3 meters.
- Additional details provided include engine specifications, hydraulic system components, dimensions, working ranges, and lifting capacity charts.
DV Mobile cranes have three 16 tonne Bubble Cranes, these cranes are extremely compact and versatile.
Features include:
25m Reach
Tight Access
4 Wheel steering
4 Wheel Drive
Heavier lifting capacity and greater distances than our 7T cranes with similar footprint.
Dimensions: 2.4m Wide x 8.5m long x 3.3m High
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
More Related Content
Similar to Buy JCB JS205LC Tracked Excavator in India - JCB Heavy Machinery
This document provides detailed specifications and dimensions for a tracked excavator. It includes information on the excavator's operating weight, engine power, hydraulic system, undercarriage, swing system, cab features, and bucket/attachment compatibility. Dimensional data is provided for the excavator body and various attachments in both metric and imperial units. Performance specs are given for digging reach, digging depth, dumping height, and tearout forces depending on attachment configuration.
The document provides specifications for the 10BOP and 13BOP order picker models from Hyundai, including their lifting capacities, dimensions, performance characteristics, electrical and hydraulic components, control systems, safety features, maintenance access, and warranty information. It also briefly outlines some new models being added to Hyundai's forklift line.
The JOY Quadbolter is a track-mounted roofbolter fitted with two boom assemblies that each carry an operator platform and two roofbolting units. It can operate in heights from 7.5 to 14.7 feet and bolts roofs at a rate of up to 25 bolts per hour. The quadbolter incorporates an inbuilt temporary roof support and has hydraulic, traction, bolting, water, electric, and control systems to operate autonomously.
Helimo for Skid-Type Helicopter Tugs from GermanyAbdo Ali
The document provides technical specifications for the Helimo IV-H helicopter lifting device. It can lift helicopters up to 5.5 tons using forks that are inserted under the helicopter skids from the front, back, or sides. It is operated via a remote control and has features like lights and a public address system to assist with loading and unloading helicopters. The document includes details on its dimensions, weight, battery system, drive motors, braking, and control panel.
Walkie type electric pallet truck cbd20 k(d)Amber Dai
The document summarizes the features of an electric pallet truck. It has an advanced AC control system that requires minimal maintenance. It has an intelligent regenerative brake system that increases performance by decreasing battery charge intervals. It has a side-way battery with a roll-out system that is convenient for replacing batteries. It also has safety features like an emergency reversing device and overload protection. The structure is waterproof and dustproof with a small turning radius. It has serviceability features like low battery protection and CANbus technology that reduces wiring complexity.
The document describes an electric pallet truck. It lists the truck's specifications and features. It has an advanced AC control system that requires minimal maintenance. It has a side-way battery that can be easily replaced using a roll-out system. The truck also has an emergency reversing device, overload protection, stepless speed control, and other safety and productivity features. It has a compact design with a small turning radius and is water-proof and dust-proof. It is designed for durability with reinforced structures and components that are easy to service.
The document provides specifications for the Yanmar 1GM10 marine diesel engine and its associated gear and instrumentation options. The 1GM10 is a small single-cylinder 4-stroke diesel engine that produces 6.7 kW at 3600 rpm. It has an indirect injection combustion system and natural aspiration. Standard instrumentation includes alarms and gauges. The engine can be paired with different gear options like the KM2P-1 gear or a saildrive to turn a propeller. Performance curves are provided to show output and fuel consumption at varying engine speeds.
The document provides specifications for a Hydraulic Crawler Crane model BMS1200HD, including:
1) Its maximum lifting capacity is 120 tons at a 5 meter radius, with a maximum crane boom length of 61 meters.
2) It lists the engine, hydraulic, and electrical systems specifications.
3) Dimensions, weights, and ground pressure are specified.
4) Boom arrangement options and their lengths are displayed in a table.
This document provides specifications for two models of articulating boom lifts from JLG Industries: the 800A and 800AJ. It lists key features such as a 6-foot articulating jib and 180-degree hydraulic platform rotator. Accessories and options include different platform sizes and mesh rail extensions. The document provides details on the lifts' reach, capacity, dimensions, performance, and powertrain options. It concludes by noting JLG's exclusive 1-and-5-year warranty coverage for structural components.
Alat beratku.blogspot.com 8000-1-product-guide-imperialVonita Allena
This document provides specifications and details for the Manitowoc 8000-1 crane. Key information includes:
- The crane has an 80 US ton capacity, 200 ft heavy-lift boom, and can reach a maximum of 180 ft with a 60 ft jib attachment for a total of 240 ft.
- It is powered by a 285 HP engine and has a maximum line speed of 525 fpm and rated line pull of 17,000 lbs.
- Additional specifications cover dimensions, components like the boom, counterweights, engine, and performance data for the winches and load charts.
- Charts and diagrams show the crane's range of motion, dimensions, component weights and specifications
This document provides specifications for an up 75 T3 RT crane. It has a rectangular boom made from strong steel that is lightweight. Its inverted outriggers and jacks protect components from debris. Maintenance components are easily accessible. It has a cab with good visibility and controls. Sensors monitor the working area and load limits. Additional details provided include the boom configuration, extensions, capacities, engine, chassis, and other technical specifications.
The Eicher 11.10 remains "The Best Selling- Value for Money Truck" in LCV category on strength of its high mileage, highest rated payload, efficient turnaround and low maintenance.
The document describes the Eicher 11.10 truck. It has the highest payload capacity and best fuel efficiency in its category. It can carry up to 8 tons of payload and gets higher mileage than competitors. It also has a longer 20-foot cargo body option. The truck remains very popular for its low maintenance costs, driving comfort, and ability to deliver high value for money over its lifetime. Key features include a powerful engine, heavy-duty axles, air brakes, and a reinforced cabin for safety.
The Grundfos DW pumps form part of a complete range of wastewater and sewage
handling products. Like all Grundfos products the DW pump series offer unique cus-
tomer benefits, making them the natural choice for any job where raw water needs to
be pumped - whether from construction sites, mining pits, excavations, or flooded base-
ments, etc.
This document provides specifications for the Yanmar 4LHA-STP marine diesel engine. It is a 4-stroke, turbocharged inline 4-cylinder engine with a displacement of 3.455 liters that produces up to 177 kW of power at 3300 rpm. It has a freshwater cooling system and enclosed lubrication system. Optional equipment includes different instrument panels, exhaust configurations, and marine gearboxes that can provide propeller speeds between 1976 rpm and 1230 rpm. Performance curves provide additional information on output, torque, fuel consumption, and recommended propeller sizes.
The document summarizes the features of a FullElectricStacker truck. It has the following key features:
1. It uses an AC motor that eliminates carbon brush replacement and has a multi-function display to show battery level, fault codes, hours of use, and speed level.
2. It has safety features like an emergency reversing device, auto deceleration, overspeed protection, and emergency power disconnect.
3. It is designed for stability with a low center of gravity, vertical drive wheel, waterproof motor, and exchangeable mast and frame components.
4. Serviceability is improved through low battery protection, concentrated electronic components, CANbus wiring, and hall sensors that increase component life
The document summarizes the features of a FullElectricStacker truck. It has an AC motor that eliminates carbon brush replacement. It has multi-function displays and emergency safety features. The structural design has a low center of gravity for stability, vertical drive wheel for easy maintenance, and removable mast and frame parts. The electrical components use CANbus technology for reliability.
This document provides specifications for a hydraulic crawler crane model CKE900-1F, including:
- A maximum lifting capacity of 90 metric tons at 3.4 meters for the crane boom and 10.9 metric tons at 18 meters for the fixed jib.
- The crane boom has a maximum length of 61 meters and the maximum fixed jib combination is 51.8 meters plus 18.3 meters.
- Additional details provided include engine specifications, hydraulic system components, dimensions, working ranges, and lifting capacity charts.
DV Mobile cranes have three 16 tonne Bubble Cranes, these cranes are extremely compact and versatile.
Features include:
25m Reach
Tight Access
4 Wheel steering
4 Wheel Drive
Heavier lifting capacity and greater distances than our 7T cranes with similar footprint.
Dimensions: 2.4m Wide x 8.5m long x 3.3m High
Similar to Buy JCB JS205LC Tracked Excavator in India - JCB Heavy Machinery (20)
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Globalfleet - global fleet survey 2021 full results
Buy JCB JS205LC Tracked Excavator in India - JCB Heavy Machinery
1. JS205 TRACKED EXCAVATOR I SPECIFICATION
* All dimensions, weights and timings are variable within 1.5% JCB reserves the right to change specifications without prior notice.
CAB + CAB GUARD
Pressed steel construction with high strength rolled sections. Excellent all round visibility
during digging, loading & positioning. Removable front lower glass and sliding rear
window. Excellent ergonomic positioning of operating levers for reduced operator
fatigue. Optional ducted AC unit with heater for operator comfort. Windscreen wiper,
FM radio with USB media player with speakers, mobile phone charging point & lockable
stowage available. Rubber covered track pedal, water bottle & document holders
provided. Optional cab guards for cab front & top available for protection against flying
objects. Additional cab top lights for illumination.
ENGINE
Model : CUMMINS 6BT 5.9C
Type : Water Cooled, 4 stroke, 6 -cylinder in-line, direct injection, turbo-
charged diesel.
Nett Power : Gross power :140 hp
Piston : 5.88 litres.
Displacement
Air filtration : Dry element with secondary safety element plus air pre-cleaner
Cooling : Water cooler via large capacity radiator with anti block 'wavy' fins.
Starting system : 24 volt.
Alternator : 24V,75 amp,Heavy duty
SERVICE CAPACITIES
Fuel tank 343
Engine coolant 25.5
Engine oil 19
Hydraulic System 203
Hydraulic tank 120
Swing Device 5
Travel Device 2 x 5Track length on ground
Undercarriage overall length
Track gauge
Width over tracks
Transport length with
Monoboom and arm
Transport height with
Monoboom and dipper
Counterweight clearance
Tailswing radius
Width of superstructure
Height over cab
Ground Clearance
Track Height
A
B
C
D
E
F
G
H
I
J
L
M
STATIC DIMENSIONS
JS205LC (LC track, 500 mm
track shoe)
JS205 (Std track,
500 mm track shoe)
2.4m arm
3660
4460
2390
2890
9634
3122
1079
2825
2549
3060
435
885
3 m arm
3660
4460
2390
2890
9562
3122
1079
2825
2549
3060
435
885
2.4m arm
3370
4170
2200
2700
9634
3122
1079
2825
2549
3060
435
885
3 m arm
3370
4170
2200
2700
9562
3122
1079
2825
2549
3060
435
885
WEIGHT AND GROUND BEARING PRESSURE
Operating Weight
Ground bearing pressure
Standard machine with bucket, operator, full capacity lubes and fuel
JS205LC
21,250 kg
0.58 kg/sq cm
JS205
20,500 kg
0.61 kg/sq cm
LC
J
S
2
0
5
JS205LC
2. JS205 TRACKED EXCAVATOR I SPECIFICATION
* All dimensions, weights and timings are variable within 1.5% JCB reserves the right to change specifications without prior notice.
TRAVEL SPEED & TRACTIVE EFFORT
Travel speed 3.8 kmph
Tractive Force 166 KN
Bucket Toe plate width (mm)
0.9 cum (GP) 1198
0.9cum (HD) 1198
1.02cum (GP) 1350
0.8cum (Rock) 1120
All buckets are JCB type fully welded steel, with
sealed, hardened steel pivot pins and replaceable wear
parts.
EXCAVATOR BUCKET
Boom Length 5.7m Arm length
Dipper unit 2.40m 3.00m
A Maximum digging reach m 9.30 9.79 m
B Maximum digging reach (on ground) m 9.10 9.61
C Maximum digging depth m 5.98 6.59
D Maximum digging height m 9.03 9.12
E Maximum dumping height m 6.46 6.57
F Maximum vertical wall cut depth m 5.47 6.14
G Minimum swing radius m 3.85 3.74
Bucket rotation deg. 183 182
Dipper tearout (ISO6015) kgf 11700 9842
Bucket tearout (ISO6015) kgf 13205 13205
WORKING RANGE: JS205LC/JS205
LC
J
S
2
0
5
LC
J
S
2
0
5
JS205LC
3. JS205 TRACKED EXCAVATOR I SPECIFICATION
FILTRATION SYSTEMTRACK DRIVE
EXCAVATOR END
Type : Fully hydrostatic
Travel motors : Axial piston type, fully guarded
within undercarriage frame.
Final Drive : Planetary reduction, bolt-on
sprackets
Service brake : Hydraulic counter balance valve to
prevent over speeding on gradients.
Park brake : Disc type, spring applied, automatic
hydraulic release.
Gradeability : 70% (35 deg.) continuous
Travel Speed : 3.8 kmph
Tractive effort : 166 kN
Deep section design of boom & am with cast ends &
pivot bosses with braker pipe mounting provision
UNDERCARRIAGE
Construction: Standard/Long undercarriage fully welded. "X" frame type with
central belly guarding and sloping sidemembers with dirt relief holes under top
rollers.
Track Shoe : 500mm (Standard)
Upper & lower rollers : Heat treated, sealed andlubricated.
Track adjustment : Grease cylinder type.
Track idler : Sealed and lubricated, withspring enhanced
recoil.
No. of track guides : 2 per side
No. of lower rollers : 8 Per side (JS205LC), 7 per side (JS205)
No. of upper rollers : 2 per side (JS205LC)
No. of track shoes : 49 per side (JS205LC), 46 per side (JS205)
SWING SYSTEM
CONTROLS
A variable flow load sensing system with flow on demand,
variable power output and servo operated, multi-function
open centre control.
2 Work modes: Productivity & Economy
Pumps
Main pumps : 2 variable displacement axial
piston type.
Maximum flow : 2 x 220 L/min.
Servo pump : Gear type
Maximum flow : 20 L/min
Control valve
A combined four and five spool control valve with auxiliary
service spool as standard. When required twin pump flow
is combined to boom, dipper and bucket services for
greater speed and efficiency.
Relief valve settings
Boom / Arm / Bucket 343 bar
Swing circuit 289 bar
Travel circuit 343 bar
Pilot control 40 bar
Swing motor : Axial piston type
Swing brake : Hydraulic braking, electrically
operated spring applied disc type
parking brake.
Final drive : Planetary reduction
Swing torque : 65.2 kNm:
Swing gear : Large diameter, internally toothed
fully sealed grease bath lubricated.
Swing speed : 12 RPM.
HYDRAULIC SYSTEM
Excavator : All servo lever operated to ISO control pattern.
Engine Auto-Idler : Reduces engine speed to low idle
depending upon machine utilisation thus saving fuel.
Tracks : Individually servo operated by foot pedal or hand
lever.
Auxiliary : Via servo operated food pedal.
Horn : Operated via servo lever mounted button.
* All dimensions, weights and timings are variable within 1.5% JCB reserves the right to change specifications without prior notice.
STANDARD EQUIPMENT
FM Radio and USB music player with speakers
Fully ducte ir conditioner unit with heaterd a
Cabin Guard (Front and Top)
Rock breaker
Rock breaker pipe Work
General purpose buckets (0.9 cum, 1.02 cum)
Heavy-Duty Buckets (0.8 cum, 0.9 cum)
First aid kit
Fire Extinguisher
High raise cabin
Long reach attachment (15m)
Cab sun screen
3 m arm
Additional hour meter for rock-breaker
Refuel pump
Auto-Idler
Work lights: 2 nos. on booms and 1no. on main frame
Additional lights; 2 nos. on cab & 1 no. on counterweight
Windscreen wiper
Engine Fan Guard
Undercarriage belly guarding
Upper structure under covers
Engine pre-cleaner
Double element radial type air cleaner
with wire mesh protection
Heavy-duty alternator (75 amp)
Cabin Fan
Suspension Seat
Cab floor Mat
Rubber covered track pedals
Removable front lower cab glass
Hammer pipe mounting brackets
Tool Kit
Handrail and nonslip walk ways
Radiator fly screen
OPTIONAL EQUIPMENT
The hydraulic components are protected by the highest
standard of filtration to ensure long hydraulic fluid life
upto 5000 hrs (subject to SOS & recommended
maintenance practices) and component life.
In tank : 150 micron, suction strainer.
Main return line : 10 micron, fibre form element.
Pilot line : 10 micron, paper element.
Hydraulic hammer return : 10 micron, reinforced
microform element.
Cooling
Worldwide cooling is provided via a full return line air
blast cooler with anti-block wavy cooling fins. Fly mesh
provided to avoid clogging of radiator and cooler films.
4. JS205 TRACKED EXCAVATOR I SPECIFICATION
JCB INDIA LIMITED 23/7 Mathura Road, Ballabgarh - 121 004 India
Tel : + 91 129 4299000 Fax: + 91 129 2309050 Website: www.jcbindia.com E-mail : delhi.marketing@jcb.com
* All dimensions, weights and timings are variable within 1.5%
JCB reserves the right to change specifications without prior notice.
Lift capacity full circle
Life capacity front and rear
3 mReach
Load Point
Height
4.5 m 6.0 m 7.5 m Capacity at Max. Reach
LIFT CAPACITIES