This document provides specifications for heavy weight drill pipe in two types - integral type and friction weld type. It lists the grade, sizes, connections, and dimensions for pipe sizes ranging from 3 1/2 inches to 6 5/8 inches. The pipe has tool joints made of AISI 4145HM steel and tubes made of AISI 1340 or equivalent steel. Dimensions included are tube ID, upset diameter, upset length, tool joint OD, tool joint ID, pin length, and box length.
Drilling Bit Introduction and bit Selection (Part 1)Amir Rafati
(PART 1,2 & 3)
1. Drilling mechanisms
2. Bit classifications (fixed cutter and roller cone bits)
3. IADC code descriptions
4. Tri-cone bits life time
5. Geometrical analysis of roller cone bits
• Fundamentals of bit design
• Basics of cone geometry design
• Oversize angle
• Offset
• Teeth and inserts
• Additional design criteria: tooth to tooth and groove clearances and etc.
• Cone-shell thickness
• Bearings factors
• Rock bit metallurgy
• Heat treatment
• Legs and cones material
• Tungsten carbide materials
• Legs and cones hard facing
• Tungsten carbide grade selection for inserts
• Bearings, seals and lubrication
• Bearing shape
• Bearing precisions and geometry
• Seal systems and seal details
• Dull grading system
6. Geometrical analysis of PDC bits
• PDC materials and constructions
• Matrix materials testing
• Differs between matrix & steel body
• Matrix body bits manufacturing
• Steel body bits manufacturing
• PDC bit design parameters: mechanical, hydraulic, rock properties
• Weld strength of PDC bits and cutters
• PDC cutter manufacturing process
• Tsp cutter properties vs PDC
• The influences of bit profile and profile elements
• PDC forces
• PDC bit stability
• PDC bit steer-ability
• Back rake
• Side rake
• Depth of cut
• Cutter exposure
• Cutter density
• Thermal damage and degradation of cutters
• Cutting mechanics
• PDC cutter substrate and its thickness
• Cutting structure elements
• Single set bladed cutting structures
• Plural set bladed cutting structures
• Dull grading system
7. ROP management based on drilling parameters
• WOB
• Rpm
• Sold content of mud
• Mud weight
• Cutter shape
• Cutters geometry
• Depth
• Abnormal pressure
• Drilling formation properties
A summary presentation of a 7" Liner job, demonstrating different components, mechanisms of liner hanger and other string components. Then a quick hint about cementing operation and some extra components involved in the job like the Handling equipment, VAM HT, ...etc.
Drilling Bit Introduction and bit Selection (Part 3)Amir Rafati
(PART 1,2 & 3)
1. Drilling mechanisms
2. Bit classifications (fixed cutter and roller cone bits)
3. IADC code descriptions
4. Tri-cone bits life time
5. Geometrical analysis of roller cone bits
• Fundamentals of bit design
• Basics of cone geometry design
• Oversize angle
• Offset
• Teeth and inserts
• Additional design criteria: tooth to tooth and groove clearances and etc.
• Cone-shell thickness
• Bearings factors
• Rock bit metallurgy
• Heat treatment
• Legs and cones material
• Tungsten carbide materials
• Legs and cones hard facing
• Tungsten carbide grade selection for inserts
• Bearings, seals and lubrication
• Bearing shape
• Bearing precisions and geometry
• Seal systems and seal details
• Dull grading system
6. Geometrical analysis of PDC bits
• PDC materials and constructions
• Matrix materials testing
• Differs between matrix & steel body
• Matrix body bits manufacturing
• Steel body bits manufacturing
• PDC bit design parameters: mechanical, hydraulic, rock properties
• Weld strength of PDC bits and cutters
• PDC cutter manufacturing process
• Tsp cutter properties vs PDC
• The influences of bit profile and profile elements
• PDC forces
• PDC bit stability
• PDC bit steer-ability
• Back rake
• Side rake
• Depth of cut
• Cutter exposure
• Cutter density
• Thermal damage and degradation of cutters
• Cutting mechanics
• PDC cutter substrate and its thickness
• Cutting structure elements
• Single set bladed cutting structures
• Plural set bladed cutting structures
• Dull grading system
7. ROP management based on drilling parameters
• WOB
• Rpm
• Sold content of mud
• Mud weight
• Cutter shape
• Cutters geometry
• Depth
• Abnormal pressure
• Drilling formation properties
Drilling Bit Introduction and bit Selection (Part 1)Amir Rafati
(PART 1,2 & 3)
1. Drilling mechanisms
2. Bit classifications (fixed cutter and roller cone bits)
3. IADC code descriptions
4. Tri-cone bits life time
5. Geometrical analysis of roller cone bits
• Fundamentals of bit design
• Basics of cone geometry design
• Oversize angle
• Offset
• Teeth and inserts
• Additional design criteria: tooth to tooth and groove clearances and etc.
• Cone-shell thickness
• Bearings factors
• Rock bit metallurgy
• Heat treatment
• Legs and cones material
• Tungsten carbide materials
• Legs and cones hard facing
• Tungsten carbide grade selection for inserts
• Bearings, seals and lubrication
• Bearing shape
• Bearing precisions and geometry
• Seal systems and seal details
• Dull grading system
6. Geometrical analysis of PDC bits
• PDC materials and constructions
• Matrix materials testing
• Differs between matrix & steel body
• Matrix body bits manufacturing
• Steel body bits manufacturing
• PDC bit design parameters: mechanical, hydraulic, rock properties
• Weld strength of PDC bits and cutters
• PDC cutter manufacturing process
• Tsp cutter properties vs PDC
• The influences of bit profile and profile elements
• PDC forces
• PDC bit stability
• PDC bit steer-ability
• Back rake
• Side rake
• Depth of cut
• Cutter exposure
• Cutter density
• Thermal damage and degradation of cutters
• Cutting mechanics
• PDC cutter substrate and its thickness
• Cutting structure elements
• Single set bladed cutting structures
• Plural set bladed cutting structures
• Dull grading system
7. ROP management based on drilling parameters
• WOB
• Rpm
• Sold content of mud
• Mud weight
• Cutter shape
• Cutters geometry
• Depth
• Abnormal pressure
• Drilling formation properties
A summary presentation of a 7" Liner job, demonstrating different components, mechanisms of liner hanger and other string components. Then a quick hint about cementing operation and some extra components involved in the job like the Handling equipment, VAM HT, ...etc.
Drilling Bit Introduction and bit Selection (Part 3)Amir Rafati
(PART 1,2 & 3)
1. Drilling mechanisms
2. Bit classifications (fixed cutter and roller cone bits)
3. IADC code descriptions
4. Tri-cone bits life time
5. Geometrical analysis of roller cone bits
• Fundamentals of bit design
• Basics of cone geometry design
• Oversize angle
• Offset
• Teeth and inserts
• Additional design criteria: tooth to tooth and groove clearances and etc.
• Cone-shell thickness
• Bearings factors
• Rock bit metallurgy
• Heat treatment
• Legs and cones material
• Tungsten carbide materials
• Legs and cones hard facing
• Tungsten carbide grade selection for inserts
• Bearings, seals and lubrication
• Bearing shape
• Bearing precisions and geometry
• Seal systems and seal details
• Dull grading system
6. Geometrical analysis of PDC bits
• PDC materials and constructions
• Matrix materials testing
• Differs between matrix & steel body
• Matrix body bits manufacturing
• Steel body bits manufacturing
• PDC bit design parameters: mechanical, hydraulic, rock properties
• Weld strength of PDC bits and cutters
• PDC cutter manufacturing process
• Tsp cutter properties vs PDC
• The influences of bit profile and profile elements
• PDC forces
• PDC bit stability
• PDC bit steer-ability
• Back rake
• Side rake
• Depth of cut
• Cutter exposure
• Cutter density
• Thermal damage and degradation of cutters
• Cutting mechanics
• PDC cutter substrate and its thickness
• Cutting structure elements
• Single set bladed cutting structures
• Plural set bladed cutting structures
• Dull grading system
7. ROP management based on drilling parameters
• WOB
• Rpm
• Sold content of mud
• Mud weight
• Cutter shape
• Cutters geometry
• Depth
• Abnormal pressure
• Drilling formation properties
The 3rd presentation of a series of presentations on Operations Geology. Very basic, just to introduce beginners to operations geology. I hope the end users will find this and the following presentations very helpful.
The seventh presentation of a series of presentations on Operations Geology. Very basic, just to introduce beginners to operations geology. I hope the end users will find this and the following presentations very helpful.
NESPL’ Manufactures and Supplier of equipment & spart parts of the Beverages sector and the export, import of equipment & spart parts for all barb and push fitting.
The 3rd presentation of a series of presentations on Operations Geology. Very basic, just to introduce beginners to operations geology. I hope the end users will find this and the following presentations very helpful.
The seventh presentation of a series of presentations on Operations Geology. Very basic, just to introduce beginners to operations geology. I hope the end users will find this and the following presentations very helpful.
NESPL’ Manufactures and Supplier of equipment & spart parts of the Beverages sector and the export, import of equipment & spart parts for all barb and push fitting.
JGB Enterprises complete line of Industrial Cleaning Hoses including Rubber, PVC & Plastic suction, Sewer cleaning, Vacuum, Water washdown & Discharge Hoses, has never made waste transfer so easy to meet the needs of every individual waste management customer. JGB Enterprises supplies a multitude of accessories including aluminum, polypropylene, & stainless camlock quick couplers, hose clamps & tools, strainers & sight glasses, valves, and more!
SEALEXCEL is a fast-growing manufacturing company in the field of design, development, production and marketing of high-quality valves and fittings for international and domestic markets, Since 1987.
https://www.sealexcel.com/pipe-fittings/
stainless pipe fittings, stainless steel pipe fittings manufacturers
Raccordi a compressione resistenti alle alte pressioni e alle alte temperature
GIGA TECH s.r.l.
Via Maestri del Lavoro 324 21040 Cislago (VA) Italy
Ph. 39 0296489130 - Fax +39 0296489303 - e-mail: contatti@giga-tech.it
Blind Flange dimensions by Sandco Metal IndustriesSunil Jain
Sandco Metal Industries is a leading manufacturer of blind flanges(BL). We specialize in producing high quality and close tolerance flanges. A blind flange, also known as blanking flange, is used in sealing an end of the piping system. This is generally used in high pressure applications to cease the flow of gases or liquids from one end. Blind flange is a convenient option to close an end of a pipe in large applications when compared to others due to its ease of access.
Learn how Merit Press technology saves you time and money when it comes to stainless press fittings & valves in your projects. Stainlesspress mates with schedule 5 and 10 stainless steel pipe.
About Merit Brass Company
Merit has a rich history of offering the most comprehensive flow control and piping connection technology. Their goal is to make the Merit Experience for
their customers seamless by bundling a complete line of consistent, high quality piping products, flow control devices and piping system solutions. Merit
features a full range of stainless steel and brass fittings, nipples, pipe, valves, flanges, stainless steel butt weld fittings, tubing, tube fittings and valves,
forged steel fittings and press technology, which includes both stainless steel and copper.
Terofox provides one stop service in diversity of valves’ procurement and ODM & OEM manufacturing, all our products and quality management procedures are in accordance with ISO 9001. Our wide range of products includes:
API608 Floating Stainless Steel Ball valve
API6D Trunnion Ball valves.
API 594 Dual plate check valves.
Concentric Butterfly Valves (Pins and Pinless / PTFE lining )
But our main focus is our “Special Product Line” in Taiwan that includes:
Sanitary Valves.
Cryogenic Valves: Used in the transmission of extreme low temperature services.
Special Alloy Valves: Some of the Materials we offer are Alloy 20, Monel, Hastelloy, Duplex/ Super Duplex Stainles Steel, Titanium and more.
Dead-man Return Ball Valves: Spring Return Handle that decreases the Torque for easier use.
Fugitive Emission ISO15848-1 certified : Safty is a trend nowadays, our low emission valve meets ISO15848-1 for eliminating fugitive emission
API607 6th Edition / ISO10497:2010 Fire Safe Approval ball valves - Flange Ball valves ( TF-20FS, TF-20DFS ), Trunnion Mounted Ball Valve ( TF-40FS, TF-44FS ) and high performance Ball Valve (EB-321DFS), Wafer Type Ball Valve ( TF-10MFS)
BS6363 Cryogenic Ball Valves
Marine Certified valves
Metal Seated Ball Valves : up to 600 Degree Celsius
3000psi/6000psi/10,000psi Ball Valves
In order to satisfy variety of requirements, we have applied for certificates such as ISO 9001, CE ( PED 97/23/EC ), API607 6th Edition Fire Safe Approved for floating and trunnion mounted ball valve, ABS PDA certificate, TA-Luft, ISO15848 for Fugitive Emmission applications, AD-2000, as well as foundry approvals: DNV, BV, LR certifications.
Our mission is to assist our customers in obtaining the best possible solutions to their requirements and needs, at the most advantageous prices, without compromising on delivery or quality. With this in mind, we believe in developing long terms relationships, based on mutual trust and honesty.
Una válvula de bola, conocida también como válvula de esfera, es un mecanismo de llave de paso que sirve para regular el flujo de un fluido canalizado y se caracteriza porque el mecanismo regulador situado en el interior es una bola perforada.
A ball valve, also known as a spherical valve, is a stopcock mechanism used to regulate the flow of a piped fluid and is characterised by having a perforated ball inside as its regulating mechanism.