6. Rig Crew Less Training
Pressure Hidrostatik Down
Pressure Abnormal Formation
Tools not good function
Late Handled Kick
Rig Crew Less Training For Close and Kill Whel
Factor Kick
Factor Blow Out
8. BLOWOUT PREVENTER (BOP) EQP.
FUNCTION
BOP EQP.
Close well at situation there a pipe or not pipe
stripping in or stripping out
Withstand pressure well that arise and can be passed all the
equipment who were used to operating the drilling / rework
Control well pressure and can be used for work
circulation kill kick
Hang (hanging off) and cut the drill pipe in an emergency.
Having a system backup equipment if one breaks down, specifically
for high pressure wells
9. BOP
EQUIPMENT
BOP Stack
Type
1. Annular Type
BOP
2. Ram Type
BOP
3. Diverter
BOP In a pipe
1. Upper Kelly
Cock
2. Lower Kelly
Cock
3. Inside BOP
4. Drill Pipe
Float Valve
Control
System
1. Accumulator
Unit
2. Driller
Remote
Control
Panel
Line Control
Systeml
1. Drilling Spool
2. Killing Line
3. Choke Line
4. Choke
Manifold
5. Manual
Choke &
Super Choke
10. *Annular Preventer
HYDRIL Type GK
13- 5/8 ‘’
Flexible Closing Tools
Closing the Hole In Pipe Nor
There
Ways of working ?
Packing Element
Pressing piston powered
Rubber Nitrogen Fluid From
Accumulator Unit
14. *BOP inside pipe
*Upper Kelly Cock 3- ½ ‘’
Between the swivel and the kelly
joint to isolate the mud from the drill
string with a swivel, rotary house and
stand pipe in the event of a leak
Lower Kelly cock 3- ½ ‘’
under kelly
To prevent mud from falling apart as a
freelance kelly kelly, which
accommodated the pressure of 5000 psi
15. *INSIDE BOP
*close / withstand pressure
from the string during a
kick or bursts.
*Inside bop should be
available on the rig floor
position Standby
17. Kill line 2 1/8” x 10.000 psi Choke line 3-1/8’’ x 10.000 psi
* Kill line
serves as a conduit to the injection of fluid into the well if
necessary to shut down wells
Choke line
To stream high pressure fluid to the manifold in case of kick
18. *Back Pressure
Manifold
CHOKE MANIFOLD OR BACK PRESSURE MANIFOLD
serves as a flow divider in the event kick by dividing the flow
of appropriate safety procedures
19. Accumulator Unit
o Accumulator unit steel
which contains high-
pressure nitrogen
o Known for Closing Unit
has the main function to
close the BOP during a
kick
o Accumulator unit
produksi ABS 80
o 3000 Psi
o 3 unit Air Pump, 1 unit
Triplex
o 20 Botol
20. * BOP Remote Control Panel
Operation
Drilling
Rig FLoorDriller
21. *Prosedur Closed Well
1. Soft Closed
Open choke line valve
Closed BOP
Closed choke slowly
Read and record the
pressure cap drill pipe
and casing
2. Hard Closed
Closed BOP
Open choke line slowly
Read and record the
pressure cap drill pipe
and casing
23. *
*BOP (Blowout Preventer) is a tool used to
cover / hold kick or the flow of formation fluids
into the wellbore uncontrolled
*Source of power Acummulator is the water
pump and Electric pump
*Back Pressure Manifold serves to mud to mud
gas to separator, reserve pit, or flare
*BOP handling system on RIG PDSI
#15.3/N110-M wells relatively good, as long as
the drilling does not problem