Report
Share
Download to read offline
Recommended
Tocci chapter 13 applications of programmable logic devices extended
The document discusses the family tree of digital systems, including standard logic, ASICs, microprocessors, DSPs, and different types of programmable logic devices like PLDs, CPLDs, and FPGAs. It covers the architectures of early PLDs like PROM, PAL, and FPLA, which have programmable AND and OR gates, as well as the different programming technologies for modern PLDs like SRAM, flash memory, EPROM, and antifuse.
Tocci chapter 12 memory devices
The document discusses various types of memory devices and technologies. It covers topics like memory terminology, ROM, EPROM, EEPROM, and flash memory. Key points include that ROM is read-only memory that can be mask-programmed or one-time programmable, while EPROM, EEPROM and flash memory use floating-gate MOS transistors and can be electrically erased and reprogrammed in bulk or individually.
Tocci ch 9 msi logic circuits
This document covers MSI (medium-scale integration) logic circuits. It discusses decoders, multiplexers, encoders, and other digital logic components. Decoders take binary inputs and activate one of multiple outputs. Multiplexers select one of several inputs to output based on a digital select code. Encoders convert coded inputs to binary outputs. The document provides circuit diagrams and explanations of common MSI components like decoders, multiplexers, priority encoders, and code converters. It also discusses applications such as seven-segment displays, LCDs, and digital systems.
Tocci ch 7 counters and registers modified x
This document discusses various types of counters and registers, including asynchronous (ripple) counters, synchronous (parallel) counters, decade counters, BCD counters, shift registers, ring counters, and Johnson counters. It provides details on their structure, operation, and applications. Key topics covered include propagation delay in ripple counters, the advantages of synchronous counters, designing counters with different mod numbers, decoding counter states, and using counters for functions like stepper motor control.
Tocci ch 6 digital arithmetic operations and circuits
The document discusses digital arithmetic operations and circuits, including binary addition, representing signed numbers, addition and subtraction in the two's complement system, multiplication and division of binary numbers, BCD addition, hexadecimal arithmetic, and arithmetic circuits. It describes how an ALU performs arithmetic operations by accepting data from memory and executing instructions from the control unit, using adders, registers, and control signals to perform addition and subtraction.
Tocci ch 3 5 boolean algebra, logic gates, combinational circuits, f fs, - re...
This document contains lecture slides on logic gates and Boolean algebra. It covers topics like De Morgan's theorem, sum of products and product of sums, logic gate representations including NAND and NOR gates, flip flops including JK and D flip flops. Circuit diagrams and truth tables are provided for latching circuits and different types of flip flops. The document is copyrighted and appears to be from a course on logic gates and Boolean algebra taught by Muhammad A M Islam.
A15 sedra ch 15 memory circuits
The document discusses latches and flip-flops, basic memory circuits. It describes the latch, SR flip-flop, CMOS enabled SR flip-flop, and CMOS SRAM memory cell. It also discusses a one-transistor dynamic RAM cell. The document focuses on the circuit designs and operations of various basic memory components.
A14 sedra ch 14 advanced mos and bipolar logic circuits
This document discusses advanced logic circuits including pseudo-NMOS logic, pass-transistor logic, dynamic MOS logic, emitter-coupled logic (ECL), and BiCMOS digital circuits. Pseudo-NMOS logic uses one transistor per input instead of two to reduce area and delay. Pass-transistor logic builds logic functions using NMOS or transmission gate switches. Dynamic MOS logic uses precharge and evaluate phases to reduce static power at the cost of increased sensitivity to noise. ECL uses differential pairs for noise immunity and constant current sources. BiCMOS combines CMOS and BJTs to achieve high performance with lower power than ECL.
Recommended
Tocci chapter 13 applications of programmable logic devices extended
The document discusses the family tree of digital systems, including standard logic, ASICs, microprocessors, DSPs, and different types of programmable logic devices like PLDs, CPLDs, and FPGAs. It covers the architectures of early PLDs like PROM, PAL, and FPLA, which have programmable AND and OR gates, as well as the different programming technologies for modern PLDs like SRAM, flash memory, EPROM, and antifuse.
Tocci chapter 12 memory devices
The document discusses various types of memory devices and technologies. It covers topics like memory terminology, ROM, EPROM, EEPROM, and flash memory. Key points include that ROM is read-only memory that can be mask-programmed or one-time programmable, while EPROM, EEPROM and flash memory use floating-gate MOS transistors and can be electrically erased and reprogrammed in bulk or individually.
Tocci ch 9 msi logic circuits
This document covers MSI (medium-scale integration) logic circuits. It discusses decoders, multiplexers, encoders, and other digital logic components. Decoders take binary inputs and activate one of multiple outputs. Multiplexers select one of several inputs to output based on a digital select code. Encoders convert coded inputs to binary outputs. The document provides circuit diagrams and explanations of common MSI components like decoders, multiplexers, priority encoders, and code converters. It also discusses applications such as seven-segment displays, LCDs, and digital systems.
Tocci ch 7 counters and registers modified x
This document discusses various types of counters and registers, including asynchronous (ripple) counters, synchronous (parallel) counters, decade counters, BCD counters, shift registers, ring counters, and Johnson counters. It provides details on their structure, operation, and applications. Key topics covered include propagation delay in ripple counters, the advantages of synchronous counters, designing counters with different mod numbers, decoding counter states, and using counters for functions like stepper motor control.
Tocci ch 6 digital arithmetic operations and circuits
The document discusses digital arithmetic operations and circuits, including binary addition, representing signed numbers, addition and subtraction in the two's complement system, multiplication and division of binary numbers, BCD addition, hexadecimal arithmetic, and arithmetic circuits. It describes how an ALU performs arithmetic operations by accepting data from memory and executing instructions from the control unit, using adders, registers, and control signals to perform addition and subtraction.
Tocci ch 3 5 boolean algebra, logic gates, combinational circuits, f fs, - re...
This document contains lecture slides on logic gates and Boolean algebra. It covers topics like De Morgan's theorem, sum of products and product of sums, logic gate representations including NAND and NOR gates, flip flops including JK and D flip flops. Circuit diagrams and truth tables are provided for latching circuits and different types of flip flops. The document is copyrighted and appears to be from a course on logic gates and Boolean algebra taught by Muhammad A M Islam.
A15 sedra ch 15 memory circuits
The document discusses latches and flip-flops, basic memory circuits. It describes the latch, SR flip-flop, CMOS enabled SR flip-flop, and CMOS SRAM memory cell. It also discusses a one-transistor dynamic RAM cell. The document focuses on the circuit designs and operations of various basic memory components.
A14 sedra ch 14 advanced mos and bipolar logic circuits
This document discusses advanced logic circuits including pseudo-NMOS logic, pass-transistor logic, dynamic MOS logic, emitter-coupled logic (ECL), and BiCMOS digital circuits. Pseudo-NMOS logic uses one transistor per input instead of two to reduce area and delay. Pass-transistor logic builds logic functions using NMOS or transmission gate switches. Dynamic MOS logic uses precharge and evaluate phases to reduce static power at the cost of increased sensitivity to noise. ECL uses differential pairs for noise immunity and constant current sources. BiCMOS combines CMOS and BJTs to achieve high performance with lower power than ECL.
A13 sedra ch 13 cmos digital logic circuits
This document discusses CMOS digital logic circuits. It covers special characteristics like fan-out, power dissipation, and propagation delay. It then describes the basic CMOS inverter circuit. The inverter uses complementary NMOS and PMOS transistors for the pull-down and pull-up networks. When the input is low, the NMOS transistor is on and the PMOS is off, pulling the output high. When the input is high, the opposite occurs. This allows the output to switch between 0V and the supply voltage with very low static power dissipation.
A09 sedra ch 9 frequency response
The document discusses the high-frequency response of common-emitter (CE) amplifiers. It first examines the CE amplifier circuit and its mid-band behavior when the capacitors are short circuits. It then explores how each internal capacitor (CB, CC, CE) affects the frequency response as it blocks signal flow at lower frequencies. The document also considers the Miller effect, which multiplies the input capacitance seen at the base due to feedback through the amplifier. Overall, the internal capacitances lower the amplifier's bandwidth as frequency decreases.
5 sedra ch 05 mosfet.ppsx
This document describes the structure and operation of MOS field-effect transistors (MOSFETs). It covers topics such as device structure, current-voltage characteristics, MOSFET circuits at DC, and large-signal equivalent circuit models. Examples are provided to illustrate how to analyze MOSFET circuits and calculate current and voltage values. The document also discusses the physical mechanisms involved in MOSFET operation such as creation of a channel for current flow and derivation of current-voltage relationships.
5 sedra ch 05 mosfet
This document discusses MOS field-effect transistors (MOSFETs) and includes the following topics:
1. It outlines the structure and operation of MOSFET devices, including creating a channel for current flow and deriving the iD-vDS relationship.
2. It covers current-voltage characteristics of MOSFETs such as the iD-vDS, iD-vGS curves and their different operating regions.
3. It provides examples of solving for unknown variables in MOSFET circuits operating in different regions, such as the triode and saturation regions.
5 sedra ch 05 mosfet revision
This document discusses MOS field-effect transistors (MOSFETs) and their operation. It covers MOSFET device structure and physical operation, current-voltage characteristics, MOSFET circuits at DC, applying MOSFETs in amplifier design, small signal operations and models, and other related topics. The document contains diagrams and equations to illustrate MOSFET characteristics and circuit analysis. It provides an overview of the key concepts and applications of MOSFET devices.
Fields Lec 2
This document discusses coordinate systems and vector calculus concepts needed for electromagnetic field theory. It introduces Cartesian, cylindrical, and spherical coordinate systems. It explains that vector integration requires defining appropriate differential elements (length, area, volume) that vary based on the coordinate system. It also introduces concepts of gradient, divergence, and curl - vector operators used to take derivatives of vector fields. The gradient represents the maximum rate of change, divergence measures flux, and curl represents rotational nature. Expressions for these operators are given in the three coordinate systems.
Fields Lec 1
The document discusses the interaction of electromagnetic fields (EMFs) with biological systems. It notes that the topic is studied to assess potential health hazards, enable applications in biology and medicine, and optimize the design of EM devices. The document outlines various effects of EMF exposure at different frequencies, therapeutic and diagnostic EMF applications, and the need to model human exposure and effects through governing equations and human body models. Key areas covered include dosimetry, various human body models, RF applications like keyless entry and MRI, hyperthermia modeling, and diagnostic applications such as endoscopic capsules.
Fields Lec 5&6
1. The document discusses various electromagnetic boundary conditions including:
- Electric and magnetic field boundary conditions between dielectric-dielectric interfaces where the normal component of B and tangential component of E are continuous.
- Conductor-dielectric boundary conditions where the surface charge density is related to the normal electric field component.
2. Faraday's law relates the rate of change of magnetic flux through a loop to the induced electromotive force around the loop. Lenz's law states that the induced current will flow such that it creates a magnetic field opposing the original change in flux.
3. The plane wave solution for electromagnetic waves in free space represents the electric and magnetic fields as propagating sinusoidal functions of space and time with
Fields Lec 4
Electrical stimulation can be used for many applications including vision restoration, epilepsy control, tremor control, cardiac pacing, and more. Magnetic fields are generated by moving electric charges. The Biot-Savart law describes the magnetic field generated by a current element, while Ampere's law relates the magnetic field to the current passing through a closed loop. Materials respond differently to magnetic fields based on properties like diamagnetism, paramagnetism, and ferromagnetism. Ferromagnetic materials have domains that can align with an external magnetic field, allowing the material to retain magnetization.
Fields Lec 3
Here are some examples of FDA-approved therapeutic devices that use direct current (DC) electric fields:
- Bone growth stimulators - Use pulsed electromagnetic fields or capacitively coupled electric fields to promote bone healing of fractures that are not healing on their own.
- Transcutaneous electrical nerve stimulators (TENS) - Apply electric currents to stimulate nerves for pain relief and muscle rehabilitation.
- Iontophoresis devices - Use low-level electrical currents to drive ionized drug molecules through the skin for local drug delivery.
- Cardioversion/defibrillation devices - Apply controlled electric shocks to the heart to treat irregular heart rhythms like atrial fibrillation or ventricular fibrillation.
Lecture 2 (system overview of c8051 f020) rv01
The document provides an overview of the Silicon Labs C8051F020 microcontroller. It describes the microcontroller's CPU, memory organization, I/O ports, analog and digital peripherals such as ADCs, DACs, and comparators. It also discusses the microcontroller's special function registers used to control and interface with its various peripherals.
Lecture 1 (course overview and 8051 architecture) rv01
This document provides an overview and syllabus for a course on the 8051 microcontroller architecture. The course covers the 8051 architecture, instruction set, programming using assembly and C languages, peripherals, interrupts, timers, serial communication, analog-to-digital converters, and more. The goals are for students to understand the 8051 architecture, develop skills in programming 8051 microcontrollers using different languages, and interface the microcontroller to external components. The course consists of lectures, tutorials, and labs using the Silicon Labs C8051F020 development board.
Lecture 12 (adc) rv01
The document discusses analog to digital converters (ADCs). It describes what an ADC is and how it converts an analog input voltage to a digital output code. It then discusses specifics of the 12-bit ADC0 on the C8051F020 microcontroller, including its input range, output coding, configuration registers, starting conversions, and programming. It provides examples of setting the SAR0 clock frequency, PGA gain, multiplexer channel, and enabling ADC0 to take conversions.
Lecture 11 (dac and comparator) rv01
The document discusses digital-to-analog converters (DACs) and analog comparators. It describes the 12-bit DACs and analog comparators available on the C8051F020 microcontroller. It explains how the DACs can be programmed to output analog voltages through control registers. It also details how the analog comparators work, including their functional block diagram, hysteresis characteristics, and interrupt capabilities.
Lecture 10 (serial communication)
This document provides an overview of serial communication and UART operation. It discusses asynchronous and synchronous serial communication, UART block diagrams, clock requirements, programming UARTs, operation modes, baud rate calculations using timers 1 and 2, and initializing UART0 using timers 1 and 2 to generate baud rates. Equations are provided to calculate the reload values for timers 1 and 2 to generate a desired baud rate given the system clock frequency. Code examples initialize UART0 for 115200 baud communication using timer 1 or timer 2 clock sources.
Lecture 5 (system clock crossbar and gpio) rv012
The document discusses the system clock, watchdog timer, port pins, and crossbar for the C8051F020 microcontroller. It describes initializing the system clock from the internal or external oscillator, configuring the watchdog timer interval and disabling it. It also covers configuring port pin output modes as open-drain or push-pull and digital inputs. Finally, it explains the crossbar's pin assignment priority and registers for configuration.
Lecture 4 (8051 instruction set) rv01
The document summarizes the instruction set of the 8051 microcontroller. It describes the different addressing modes including register, direct, indirect, immediate, relative, absolute, long and indexed addressing. It also explains the various instruction types such as arithmetic, logical, data transfer, boolean and program branching instructions. Examples are provided for different instructions like ADD, MOV, JMP etc. to illustrate how they work and affect processor registers.
Lecture 3 (tool stick platform) rv01
The document describes the ToolStick development platform from Silicon Labs. It consists of a base adapter that provides a USB debug interface and daughter cards with target microcontrollers. The ToolStick platform and Silicon Labs IDE software allow developing and debugging code on the microcontroller. Key features of the ToolStick described include programming and debugging the microcontroller, configuring ports in real-time using the IDE, setting breakpoints, single-stepping code, and viewing variable values while debugging.
Modern control 2
The document discusses concepts related to linear time-invariant systems represented by state-space models. It provides:
1) An overview of desired learning outcomes related to solving state equations and understanding controllability and observability.
2) Details on solving the homogeneous and non-homogeneous state equations, including definitions of zero-state and zero-input responses.
3) The condition for a system to be completely state controllable, which is that the controllability matrix must be of full rank.
Classical control 2
The document discusses root locus analysis and stability analysis in the frequency domain. It begins with an overview of absolute and relative stability. It then discusses Routh's stability criterion for analyzing the stability of linear time-invariant systems using the coefficients of the characteristic equation. The document provides examples of applying Routh's criterion. It also discusses the root locus method for analyzing how the location of closed-loop poles varies with changes in a system parameter like gain. Key concepts of the root locus method like angle and magnitude conditions are explained. An example demonstrates how to construct a root locus plot.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
More Related Content
More from cairo university
A13 sedra ch 13 cmos digital logic circuits
This document discusses CMOS digital logic circuits. It covers special characteristics like fan-out, power dissipation, and propagation delay. It then describes the basic CMOS inverter circuit. The inverter uses complementary NMOS and PMOS transistors for the pull-down and pull-up networks. When the input is low, the NMOS transistor is on and the PMOS is off, pulling the output high. When the input is high, the opposite occurs. This allows the output to switch between 0V and the supply voltage with very low static power dissipation.
A09 sedra ch 9 frequency response
The document discusses the high-frequency response of common-emitter (CE) amplifiers. It first examines the CE amplifier circuit and its mid-band behavior when the capacitors are short circuits. It then explores how each internal capacitor (CB, CC, CE) affects the frequency response as it blocks signal flow at lower frequencies. The document also considers the Miller effect, which multiplies the input capacitance seen at the base due to feedback through the amplifier. Overall, the internal capacitances lower the amplifier's bandwidth as frequency decreases.
5 sedra ch 05 mosfet.ppsx
This document describes the structure and operation of MOS field-effect transistors (MOSFETs). It covers topics such as device structure, current-voltage characteristics, MOSFET circuits at DC, and large-signal equivalent circuit models. Examples are provided to illustrate how to analyze MOSFET circuits and calculate current and voltage values. The document also discusses the physical mechanisms involved in MOSFET operation such as creation of a channel for current flow and derivation of current-voltage relationships.
5 sedra ch 05 mosfet
This document discusses MOS field-effect transistors (MOSFETs) and includes the following topics:
1. It outlines the structure and operation of MOSFET devices, including creating a channel for current flow and deriving the iD-vDS relationship.
2. It covers current-voltage characteristics of MOSFETs such as the iD-vDS, iD-vGS curves and their different operating regions.
3. It provides examples of solving for unknown variables in MOSFET circuits operating in different regions, such as the triode and saturation regions.
5 sedra ch 05 mosfet revision
This document discusses MOS field-effect transistors (MOSFETs) and their operation. It covers MOSFET device structure and physical operation, current-voltage characteristics, MOSFET circuits at DC, applying MOSFETs in amplifier design, small signal operations and models, and other related topics. The document contains diagrams and equations to illustrate MOSFET characteristics and circuit analysis. It provides an overview of the key concepts and applications of MOSFET devices.
Fields Lec 2
This document discusses coordinate systems and vector calculus concepts needed for electromagnetic field theory. It introduces Cartesian, cylindrical, and spherical coordinate systems. It explains that vector integration requires defining appropriate differential elements (length, area, volume) that vary based on the coordinate system. It also introduces concepts of gradient, divergence, and curl - vector operators used to take derivatives of vector fields. The gradient represents the maximum rate of change, divergence measures flux, and curl represents rotational nature. Expressions for these operators are given in the three coordinate systems.
Fields Lec 1
The document discusses the interaction of electromagnetic fields (EMFs) with biological systems. It notes that the topic is studied to assess potential health hazards, enable applications in biology and medicine, and optimize the design of EM devices. The document outlines various effects of EMF exposure at different frequencies, therapeutic and diagnostic EMF applications, and the need to model human exposure and effects through governing equations and human body models. Key areas covered include dosimetry, various human body models, RF applications like keyless entry and MRI, hyperthermia modeling, and diagnostic applications such as endoscopic capsules.
Fields Lec 5&6
1. The document discusses various electromagnetic boundary conditions including:
- Electric and magnetic field boundary conditions between dielectric-dielectric interfaces where the normal component of B and tangential component of E are continuous.
- Conductor-dielectric boundary conditions where the surface charge density is related to the normal electric field component.
2. Faraday's law relates the rate of change of magnetic flux through a loop to the induced electromotive force around the loop. Lenz's law states that the induced current will flow such that it creates a magnetic field opposing the original change in flux.
3. The plane wave solution for electromagnetic waves in free space represents the electric and magnetic fields as propagating sinusoidal functions of space and time with
Fields Lec 4
Electrical stimulation can be used for many applications including vision restoration, epilepsy control, tremor control, cardiac pacing, and more. Magnetic fields are generated by moving electric charges. The Biot-Savart law describes the magnetic field generated by a current element, while Ampere's law relates the magnetic field to the current passing through a closed loop. Materials respond differently to magnetic fields based on properties like diamagnetism, paramagnetism, and ferromagnetism. Ferromagnetic materials have domains that can align with an external magnetic field, allowing the material to retain magnetization.
Fields Lec 3
Here are some examples of FDA-approved therapeutic devices that use direct current (DC) electric fields:
- Bone growth stimulators - Use pulsed electromagnetic fields or capacitively coupled electric fields to promote bone healing of fractures that are not healing on their own.
- Transcutaneous electrical nerve stimulators (TENS) - Apply electric currents to stimulate nerves for pain relief and muscle rehabilitation.
- Iontophoresis devices - Use low-level electrical currents to drive ionized drug molecules through the skin for local drug delivery.
- Cardioversion/defibrillation devices - Apply controlled electric shocks to the heart to treat irregular heart rhythms like atrial fibrillation or ventricular fibrillation.
Lecture 2 (system overview of c8051 f020) rv01
The document provides an overview of the Silicon Labs C8051F020 microcontroller. It describes the microcontroller's CPU, memory organization, I/O ports, analog and digital peripherals such as ADCs, DACs, and comparators. It also discusses the microcontroller's special function registers used to control and interface with its various peripherals.
Lecture 1 (course overview and 8051 architecture) rv01
This document provides an overview and syllabus for a course on the 8051 microcontroller architecture. The course covers the 8051 architecture, instruction set, programming using assembly and C languages, peripherals, interrupts, timers, serial communication, analog-to-digital converters, and more. The goals are for students to understand the 8051 architecture, develop skills in programming 8051 microcontrollers using different languages, and interface the microcontroller to external components. The course consists of lectures, tutorials, and labs using the Silicon Labs C8051F020 development board.
Lecture 12 (adc) rv01
The document discusses analog to digital converters (ADCs). It describes what an ADC is and how it converts an analog input voltage to a digital output code. It then discusses specifics of the 12-bit ADC0 on the C8051F020 microcontroller, including its input range, output coding, configuration registers, starting conversions, and programming. It provides examples of setting the SAR0 clock frequency, PGA gain, multiplexer channel, and enabling ADC0 to take conversions.
Lecture 11 (dac and comparator) rv01
The document discusses digital-to-analog converters (DACs) and analog comparators. It describes the 12-bit DACs and analog comparators available on the C8051F020 microcontroller. It explains how the DACs can be programmed to output analog voltages through control registers. It also details how the analog comparators work, including their functional block diagram, hysteresis characteristics, and interrupt capabilities.
Lecture 10 (serial communication)
This document provides an overview of serial communication and UART operation. It discusses asynchronous and synchronous serial communication, UART block diagrams, clock requirements, programming UARTs, operation modes, baud rate calculations using timers 1 and 2, and initializing UART0 using timers 1 and 2 to generate baud rates. Equations are provided to calculate the reload values for timers 1 and 2 to generate a desired baud rate given the system clock frequency. Code examples initialize UART0 for 115200 baud communication using timer 1 or timer 2 clock sources.
Lecture 5 (system clock crossbar and gpio) rv012
The document discusses the system clock, watchdog timer, port pins, and crossbar for the C8051F020 microcontroller. It describes initializing the system clock from the internal or external oscillator, configuring the watchdog timer interval and disabling it. It also covers configuring port pin output modes as open-drain or push-pull and digital inputs. Finally, it explains the crossbar's pin assignment priority and registers for configuration.
Lecture 4 (8051 instruction set) rv01
The document summarizes the instruction set of the 8051 microcontroller. It describes the different addressing modes including register, direct, indirect, immediate, relative, absolute, long and indexed addressing. It also explains the various instruction types such as arithmetic, logical, data transfer, boolean and program branching instructions. Examples are provided for different instructions like ADD, MOV, JMP etc. to illustrate how they work and affect processor registers.
Lecture 3 (tool stick platform) rv01
The document describes the ToolStick development platform from Silicon Labs. It consists of a base adapter that provides a USB debug interface and daughter cards with target microcontrollers. The ToolStick platform and Silicon Labs IDE software allow developing and debugging code on the microcontroller. Key features of the ToolStick described include programming and debugging the microcontroller, configuring ports in real-time using the IDE, setting breakpoints, single-stepping code, and viewing variable values while debugging.
Modern control 2
The document discusses concepts related to linear time-invariant systems represented by state-space models. It provides:
1) An overview of desired learning outcomes related to solving state equations and understanding controllability and observability.
2) Details on solving the homogeneous and non-homogeneous state equations, including definitions of zero-state and zero-input responses.
3) The condition for a system to be completely state controllable, which is that the controllability matrix must be of full rank.
Classical control 2
The document discusses root locus analysis and stability analysis in the frequency domain. It begins with an overview of absolute and relative stability. It then discusses Routh's stability criterion for analyzing the stability of linear time-invariant systems using the coefficients of the characteristic equation. The document provides examples of applying Routh's criterion. It also discusses the root locus method for analyzing how the location of closed-loop poles varies with changes in a system parameter like gain. Key concepts of the root locus method like angle and magnitude conditions are explained. An example demonstrates how to construct a root locus plot.
More from cairo university (20)
Lecture 1 (course overview and 8051 architecture) rv01
Lecture 1 (course overview and 8051 architecture) rv01
Recently uploaded
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Hematology Analyzer Machine - Complete Blood Count
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Recently uploaded (20)
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Hematology Analyzer Machine - Complete Blood Count
Hematology Analyzer Machine - Complete Blood Count
Introduction to AI Safety (public presentation).pptx
Introduction to AI Safety (public presentation).pptx
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...