Ultisolar MPPT Controller Tracer Series specification
Available at http://shop.ultisolar.com
About Ultisolar: Ultisolar is focus on MPPT Controller, PWM Controller, SWH Controller, SWH Station, Hall Flow Sensor
Stepper Motor Drive For Position Control in Robotic Applicationsijiert bestjournal
This project is about making an embedded system in order to control different functionalities of a stepper motor. The main functi ons of this stepper motor are to control the speed and direction. This system will actually adapt the requirements o f the modern technology. With the help of this system one can control the speed of th e stepper motor controller for pick and place robot which is used in material hand ling in various industries.
Stepper Motor Drive For Position Control in Robotic Applicationsijiert bestjournal
This project is about making an embedded system in order to control different functionalities of a stepper motor. The main functi ons of this stepper motor are to control the speed and direction. This system will actually adapt the requirements o f the modern technology. With the help of this system one can control the speed of th e stepper motor controller for pick and place robot which is used in material hand ling in various industries.
The GM10 modular data acquisition and logging system utilizes an expandable housing linked to the module base. This design enables the use of a wide range of I/O modules, which can be expanded by one or more at a time. This data can be logged and changed in real time without additional software.
Robocop final year project presentation by Abhimanyu KumarAbhimanyu Kumar
This is the project presentation of my project based on Autonomous robotics using parallel processing . This is the project is basically to fabricate a system of Robotics car Which is capable of Controlling vehicle using power of parallel processing .
Info at http://parker.com/powergen - For many years, gas turbines have been started by hydraulic or even high flow air systems. Hydraulic technology is the current prevalent method in traditional gas turbine starter applications; the seemingly more flexible and modern electrical alternatives simply could not meet the demands of the application. Today however, new technological advances have turned electrical solutions into a superior alternative to hydraulics. The solution? Parker developed its new electrical starter system that is customized to meet the demands and duty requirements of gas turbine packages. Info at http://parker.com/powergen
AC Induction motor (IM) are used as actuators in many industrial processes. Although IMs are reliable, they are subjected to some undesirable stresses, causing faults resulting in failure. Monitoring of an IM is a fast emerging technology for the detection of initial faults. It avoids unexpected failure of an industrial process. Monitoring techniques can be classified as the conventional and the digital techniques.
1.1 PROTECTION SCHEME OF INDUCTION MOTOR
Classical monitoring techniques for three-phase IMs are generally provided by some combination of mechanical and electrical monitoring equipment. Mechanical forms of motor sensing are also limited in ability to detect electrical faults, such as stator insulation failures. In addition, the mechanical parts of the equipment can cause problems in the course of operation and can reduce the life and efficiency of a system.
It is well known that IM monitoring has been studied by many researchers and reviewed in a number of works. Reviews about various stator faults and their causes, and detection techniques, latest trends, and diagnosis methods supported by the artificial intelligence, the microprocessor, the computer and other techniques in monitoring unbalanced voltage inter turn faults, stator winding temperature and microcontroller based digital protectors have been recently studied subjects. In these, while one or two variables were considered together to protect the IMs, the variables of the motor were not considered altogether. Measurements of the voltages, currents, temperatures, and speed were achieved and transferred to the computer for final protection decision.
A programmable integrated circuit (PIC) based protection system has been introduced using Microprocessors and the solutions of various faults of the phase currents, the phase voltages, the speed, and the winding temperatures of an IM occurring in operation have been achieved with the help of the microcontroller, but these electrical parameters have not been displayed on a screen.
Nowadays, the most widely used area of programmable logic controller (PLC) is the control circuits of industrial automation systems. The PLC systems are equipped with special I/O units appropriate for direct usage in industrial automation systems. The input components, such as the pressure, the level, and the temperature sensors, can be directly connected to the input. The driver components of the control circuit such as contactors and solenoid valves can directly be connected to the output.
At Softroniics we provide job oriented training for freshers in IT sector. We are Pioneers in all leading technologies like Android, Java, .NET, PHP, Python, Embedded Systems, Matlab, NS2, VLSI etc. We are specializiling in technologies like Big Data, Cloud Computing, Internet Of Things (iOT), Data Mining, Networking, Information Security, Image Processing, Mechanical, Automobile automation and many other. We are providing long term and short term internship also.
We are providing short term in industrial training, internship and inplant training for Btech/Bsc/MCA/MTech students. Attached is the list of Topics for Mechanical, Automobile and Mechatronics areas.
MD MANIKANDAN-9037291113,04954021113
softroniics@gmail.com
www.softroniics.com
Analysis of Induction Motor Speed Control Using SCADA Based Drive Operated Sy...IJSRD
This Paper represents the analysis of induction motor speed control using VFD (Variable Frequency Drive) system operated by PLC-SCADA system. The main aim of the paper is to dealt with the concept of speed control of a three-phase induction motor with energy saving. To do so, a VFD (Variable Frequency Drive) is used for controlling the speed of a three-phase induction motor with variable load attached to the motor. It certainly leads to the best performance and high efficiency of the induction motor. Programmable Logic Controller (PLC) and Supervisory Control And Data Acquisition (SCADA) are two new systems to control a Variable Frequency Drive (VFD) whose output is given to a three-phase induction motor and driving a conveyor belt. The conveyor belt has three sensors are inputs which senses a passing object and carries out the necessary instructions programmed in ladder logic programming of the PLC through the computer (PC). The SCADA software installed in the PC in turn enables the human operator to control the entire operation away from the plant and just by using the virtual inputs designated on his computer screen.
The GM10 modular data acquisition and logging system utilizes an expandable housing linked to the module base. This design enables the use of a wide range of I/O modules, which can be expanded by one or more at a time. This data can be logged and changed in real time without additional software.
Robocop final year project presentation by Abhimanyu KumarAbhimanyu Kumar
This is the project presentation of my project based on Autonomous robotics using parallel processing . This is the project is basically to fabricate a system of Robotics car Which is capable of Controlling vehicle using power of parallel processing .
Info at http://parker.com/powergen - For many years, gas turbines have been started by hydraulic or even high flow air systems. Hydraulic technology is the current prevalent method in traditional gas turbine starter applications; the seemingly more flexible and modern electrical alternatives simply could not meet the demands of the application. Today however, new technological advances have turned electrical solutions into a superior alternative to hydraulics. The solution? Parker developed its new electrical starter system that is customized to meet the demands and duty requirements of gas turbine packages. Info at http://parker.com/powergen
AC Induction motor (IM) are used as actuators in many industrial processes. Although IMs are reliable, they are subjected to some undesirable stresses, causing faults resulting in failure. Monitoring of an IM is a fast emerging technology for the detection of initial faults. It avoids unexpected failure of an industrial process. Monitoring techniques can be classified as the conventional and the digital techniques.
1.1 PROTECTION SCHEME OF INDUCTION MOTOR
Classical monitoring techniques for three-phase IMs are generally provided by some combination of mechanical and electrical monitoring equipment. Mechanical forms of motor sensing are also limited in ability to detect electrical faults, such as stator insulation failures. In addition, the mechanical parts of the equipment can cause problems in the course of operation and can reduce the life and efficiency of a system.
It is well known that IM monitoring has been studied by many researchers and reviewed in a number of works. Reviews about various stator faults and their causes, and detection techniques, latest trends, and diagnosis methods supported by the artificial intelligence, the microprocessor, the computer and other techniques in monitoring unbalanced voltage inter turn faults, stator winding temperature and microcontroller based digital protectors have been recently studied subjects. In these, while one or two variables were considered together to protect the IMs, the variables of the motor were not considered altogether. Measurements of the voltages, currents, temperatures, and speed were achieved and transferred to the computer for final protection decision.
A programmable integrated circuit (PIC) based protection system has been introduced using Microprocessors and the solutions of various faults of the phase currents, the phase voltages, the speed, and the winding temperatures of an IM occurring in operation have been achieved with the help of the microcontroller, but these electrical parameters have not been displayed on a screen.
Nowadays, the most widely used area of programmable logic controller (PLC) is the control circuits of industrial automation systems. The PLC systems are equipped with special I/O units appropriate for direct usage in industrial automation systems. The input components, such as the pressure, the level, and the temperature sensors, can be directly connected to the input. The driver components of the control circuit such as contactors and solenoid valves can directly be connected to the output.
At Softroniics we provide job oriented training for freshers in IT sector. We are Pioneers in all leading technologies like Android, Java, .NET, PHP, Python, Embedded Systems, Matlab, NS2, VLSI etc. We are specializiling in technologies like Big Data, Cloud Computing, Internet Of Things (iOT), Data Mining, Networking, Information Security, Image Processing, Mechanical, Automobile automation and many other. We are providing long term and short term internship also.
We are providing short term in industrial training, internship and inplant training for Btech/Bsc/MCA/MTech students. Attached is the list of Topics for Mechanical, Automobile and Mechatronics areas.
MD MANIKANDAN-9037291113,04954021113
softroniics@gmail.com
www.softroniics.com
Analysis of Induction Motor Speed Control Using SCADA Based Drive Operated Sy...IJSRD
This Paper represents the analysis of induction motor speed control using VFD (Variable Frequency Drive) system operated by PLC-SCADA system. The main aim of the paper is to dealt with the concept of speed control of a three-phase induction motor with energy saving. To do so, a VFD (Variable Frequency Drive) is used for controlling the speed of a three-phase induction motor with variable load attached to the motor. It certainly leads to the best performance and high efficiency of the induction motor. Programmable Logic Controller (PLC) and Supervisory Control And Data Acquisition (SCADA) are two new systems to control a Variable Frequency Drive (VFD) whose output is given to a three-phase induction motor and driving a conveyor belt. The conveyor belt has three sensors are inputs which senses a passing object and carries out the necessary instructions programmed in ladder logic programming of the PLC through the computer (PC). The SCADA software installed in the PC in turn enables the human operator to control the entire operation away from the plant and just by using the virtual inputs designated on his computer screen.
Ultisolar iT3415 iT4415 iT6415 iTracer User Manual
Available at http://shop.ultisolar.com
-Ultisolar New Energy Co., Ltd
SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
The electric power supplied by a photovoltaic power generation system depends on the solar radiation and temperature. Designing efficient PV systems heavily emphasizes to track the maximum power operating point.
This work develops a three-point weight comparison method that avoids the oscillation problem of the perturbation and observation algorithm which is often employed to track the maximum power point. Furthermore, a low cost control unit is developed, based on a single chip to adjust the output voltage of the solar cell array.
Etracer6415BND Etracer4415bnd user manual by Ultisolar New Energy
6210984510002687504
Available at http://shop.ultisolar.com Paypal, Amazing Shipping freight to 100 countries and more. -Ultisolar New Energy Co., Ltd SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
Sun Magic is a state of art PCU product from Enertech product basket with Global standards. This unit will give operational flexibility to its customers to enjoy the benefits of advanced monitoring and control features.
Visit - https://www.enertechups.com/products/solar-off-grid-inverter/solar-on-grid-tied-inverter/sunmagic-bidirectional-inverter/
This is a presentation of research in the field of automation of steam turbines power upon 200MW of the group of Process Automation at Institute Mihajlo Pupin, Belgrade. In short, this is a model of steam turbine, which is used during the development of control algorithms steam turbine, power plant personnel training and optimization of steam turbine operation. The model has been adapted to work in real time and is applied in the form of hardware in the loop (HIL) simulation.
Similar to Ultisolar MPPT Controller Tracer Series specification (20)
SPP-01 Super Parameter Programmer User Manual
Available at http://shop.ultisolar.com Paypal, Amazing Shipping freight to 100 countries and more. -Ultisolar New Energy Co., Ltd SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
Available at http://shop.ultisolar.com Paypal, Amazing Shipping freight to 100 countries and more. -Ultisolar New Energy Co., Ltd SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
SR805 Remote Controller User Manual
Available at http://shop.ultisolar.com Paypal, Amazing Shipping freight to 100 countries and more. -Ultisolar New Energy Co., Ltd SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
Ultisolar VS2048BN-VS3048BN-VS4548BN-VS6048BN User Manual
Available at http://shop.ultisolar.com
-Ultisolar New Energy Co., Ltd
SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
Ultisolar VS1024BN-VS2024BN-VS3024BN-VS4524BN-VS6024BN User Manual
Available at http://shop.ultisolar.com
-Ultisolar New Energy Co., Ltd
SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
Ultisolar LS1024BP LS2024BP Solar Controller user manual
Available at http://shop.ultisolar.com
-Ultisolar New Energy Co., Ltd
SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers
MT50 for LS1024B/ LS2024B/ LS3024B PWM solar controller
Available at http://shop.ultisolar.com
About Ultisolar: Ultisolar is focus on MPPT Controller, PWM Controller, SWH Controller, SWH Station, Hall Flow Sensor
More from Shandong iSentrol Electronic Technology Co., Ltd (20)
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
Ultisolar MPPT Controller Tracer Series specification
1. TRACER Maximum Power Point Tracking
Solar controller
Tracer series controller adopts latest MPPT
technology (Maximum Power Point Tracking)
and advanced tracking algorithm to make
the solar module operate at ideal voltage
which the solar modules can product the
maximum available power.
Compared to conventional PWM controller,
MPPT technology increases the charge
efficiency up to 30% and potentially decrease
the power of solar array needed.
The ability to step-down the higher voltage
solar module to recharge a lower voltage
battery bank greatly increases system design
flexibility. The cable size can be reduced
because of the small current from the solar
array.
Features:
◆ MPPT technology
◆ Peak conversion efficiency of 97%
◆ High Tracking efficiency of 99%
◆ Several seconds tracking speed
◆ 4-Stage charge with PWM output
◆ Nature convection cooling
◆ Full power output up to 45 ℃
◆ Temperature compensation
◆ Sealed, Gel and Flooded battery option
◆ Diversified load control
◆ RJ45 interface &optional meter
◆ 2 years warranty
◆ CE certificate
Optional Accessories :
remote meter MT-5
Electronic protection:
◆ PV Array Short Circuit
◆ PV Overvoltage
◆ PV Overcurrent
◆ Load Overload
◆ Load short circuit
◆ PV Reverse Polarity
◆ Battery Reverse Polarity
◆ High Voltage Transients
2. TRACER MPPT Solar Controller
Electrical parameters
Tracer-1206RN
Tracer-1210RN
Tracer-1215RN
Tracer-2210RN
Tracer-2215RN
Tracer-3215RN Tracer-4215RN
Nominal System Voltage 12V/24V auto work
Rated Battery Current 10A 20A 30A 45A
Rated Load Current 10A 20A 20A 20A
Maximum Battery Voltage 32V
Max. Solar Input Voltage
60VDC
(Tracer-1206RN)
-- -- --
100VDC
(Tracer-1210RN)
100VDC
(Tracer-
1210RN)
-- --
150VDC
(Tracer-1215RN)
150VDC
(Tracer-
2215RN)
150VDC
(Tracer-3215RN)
150VDC
(Tracer-4215RN)
Max. PV input power
12V 130W 12V 260W 12V 390W 12V 585W
24V 260W 24V 520W 24V 780W 24V 1170W
Self-consumption ≤10mA(24V)
Communication TTL232 / 8pin RJ45
Temp. compensation -30mV/℃/12V(25℃)
Mechanical Parameters
Tracer-1206RN
Tracer-1210RN
Tracer-1215RN
Tracer-2210RN
Tracer-2215RN
Tracer-3215RN Tracer-4215RN
Overall dimension 156x97x68mm 169x118x83mm 242x169x91mm 242x169x91mm
Mounting holes 147x60mm 160x80mm 180x160mm 180x160mm
Terminal 4mm2 10mm2 25mm2 25mm2
Net weight 0.55kg 0.95kg 2kg 2.05kg
Environmental parameters
Working temperature -35℃ to +55℃
Storage temperature -35℃ to +80℃
Humidity 10%-90% NC
Enclosure IP30