Our Output Data in Reverse Engineering Service
•
0 likes•110 views
Reverse engineering can generate either a parametric solid model or hybrid surface model from scan data. A parametric solid model uses a CAD program to create a solid model that can be modified parametrically and includes or ignores manufacturing defects. A hybrid surface model results in a patchwork of small surfaces that can have modifications requiring re-trimming and captures the as-built state including defects.
Report
Share
Report
Share
Download to read offline
Recommended
Auto cad
Learn AutoCAD at BESTECH SOLUTIONS
In today’s modern life, engineering design is the basis of just about everything we see and touch. It is easy to see the designing behind cars, air planes, television, etc. On the other side, not many people realize that there is engineering designing process behind the road in front of your house, the bridge that we cross, the structure in our office buildings and the systems that create the comfort in our work environment. So designing means continuously changing the geometry of the model and makes it suitable at every place. As for engineering students of Mechanical, Civil and Electrical fields there are many designing software available for enhancing their employability and technical skills. However, whenever we ask from someone senior about which designing software is good for us as a beginner? They replied to AutoCAD. Well they all are right as AutoCAD is one of the widely used software around the world by manufacturing, construction and designing industries. AutoCAD often referred to as Father of Designing and Drafting software. The distinct feature of this software is way it functions, ease to understand and very much friendly to user. AutoCAD has reduced the time engineers must spend making manual drawings. Learning this software not only makes you good designer but also generates curiosity to learn more. AutoCAD allows the user to understand all the basic aspects of designing whether it is 2D, 3D or Isometric modeling which will be very helpful in going to advanced courses. The software enables users to create documentation for their design. This is a major benefit to taking AutoCAD classes and learning how this documentation is developed, helping others understand what is involved in the design with ease.
Contact Us at 0532-2400572, 8354998993
Visit Us at www.bestechsolutions.com
Mail Us at info@bestechsolutions.com
Like Us at www.facebook.com/bestechsol
Auto cad
This document provides an overview of AutoCAD, including:
- AutoCAD is 2D and 3D computer-aided drafting software useful for mechanical, civil, and architectural design. It allows users to create blueprints, floor plans, 3D models, and construction drawings.
- AutoCAD was developed in 1982 by Autodesk to aid programmers in all aspects of 2D and 3D design, building upon earlier CAD software from the 1950s-60s.
- Key concepts in AutoCAD include layers for organizing drawings, coordinate systems, drawing commands, and modifying commands for moving, rotating, copying objects. The interface provides tools for commands, views, and a drawing space to work in.
Cad cam cae
This document provides an overview of CAD (computer-aided design), CAM (computer-aided manufacturing), and CAE (computer-aided engineering). It discusses the history and definitions of these terms. CAD involves using computers to assist in the creation, modification, analysis, or optimization of a design. CAM bridges the gap between conceptual design and manufacturing. CAE uses software to simulate engineering problems like stress analysis. The document then discusses CAD topics like boundary representation, constructive solid geometry, function representation, parametric design, and examples of 2D and 3D CAD software.
RLB_Resume
Richard Broussard has over 15 years of experience in GIS and CAD software. He is proficient in AutoCAD, TerraModel, PLSCADD, Microsoft Excel, Word, Google Earth, Street Atlas, Photoshop, and Eagle Point. As a senior CAD specialist, he prepared plan and profile maps, vectorized scanned maps, and imported and exported data between various formats. He also has experience in project management, quality control, and training new employees.
Enroute woodworking 1547067548
EnRoute is CAD/CAM software for woodworking that offers a blend of artistic drawing tools and precision machining features. It has an intuitive interface and specialized tools to make designing and machining easier. The software can be used for applications like inlays, curved moldings, cabinets, and more. It includes 2D and 3D design tools, a parametric texture library, toolpathing, nesting, and CNC output capabilities. EnRoute provides designers and woodworkers with a full-featured solution for both design and manufacturing of wood projects.
Fikus presentation 2015
This presentation provides an overview of Metalcam, a European company that develops CAD/CAM solutions. It has been developing these solutions since 1991 and has customers in over 20 countries. The presentation describes Metalcam's mission to develop powerful and easy to use CAM systems that help customers gain a competitive advantage. It also outlines Metalcam's experience, partnerships, locations, and its flagship product Fikus Visualcam, a mature and reliable CAM system used by over 10,000 customers worldwide for programming CNC machines.
Presentation1
Sagar Enterprises is a company located in Nashik, India that deals with special purpose machines, fixtures, machined components, industrial automation, prototype development, 3D modeling, drafting, and mechanical and electronic assembly. The company has various lathe machines, drilling machines, sawing machines, welding equipment, and grinding machines. It provides mechanical design, finite element analysis, drafting, modeling, and consulting services to clients in various industries.
Adapt builder-floor pro-2009_spec_sheet
This document describes ADAPT-Builder 2009, a 3D finite element software for analyzing and designing concrete and post-tensioned slab and foundation systems. It provides a powerful yet easy to use tool for analyzing complex slabs and foundations. Unlike 2D programs, it performs true 3D finite element analysis for more accurate results. It also includes dynamic rebar design capabilities and integrates with Revit Structure for bidirectional BIM functionality. Key features include 3D modeling, importing various file formats, component-based assembly, finite element analysis, code checking, reinforcement design, and report generation.
Recommended
Auto cad
Learn AutoCAD at BESTECH SOLUTIONS
In today’s modern life, engineering design is the basis of just about everything we see and touch. It is easy to see the designing behind cars, air planes, television, etc. On the other side, not many people realize that there is engineering designing process behind the road in front of your house, the bridge that we cross, the structure in our office buildings and the systems that create the comfort in our work environment. So designing means continuously changing the geometry of the model and makes it suitable at every place. As for engineering students of Mechanical, Civil and Electrical fields there are many designing software available for enhancing their employability and technical skills. However, whenever we ask from someone senior about which designing software is good for us as a beginner? They replied to AutoCAD. Well they all are right as AutoCAD is one of the widely used software around the world by manufacturing, construction and designing industries. AutoCAD often referred to as Father of Designing and Drafting software. The distinct feature of this software is way it functions, ease to understand and very much friendly to user. AutoCAD has reduced the time engineers must spend making manual drawings. Learning this software not only makes you good designer but also generates curiosity to learn more. AutoCAD allows the user to understand all the basic aspects of designing whether it is 2D, 3D or Isometric modeling which will be very helpful in going to advanced courses. The software enables users to create documentation for their design. This is a major benefit to taking AutoCAD classes and learning how this documentation is developed, helping others understand what is involved in the design with ease.
Contact Us at 0532-2400572, 8354998993
Visit Us at www.bestechsolutions.com
Mail Us at info@bestechsolutions.com
Like Us at www.facebook.com/bestechsol
Auto cad
This document provides an overview of AutoCAD, including:
- AutoCAD is 2D and 3D computer-aided drafting software useful for mechanical, civil, and architectural design. It allows users to create blueprints, floor plans, 3D models, and construction drawings.
- AutoCAD was developed in 1982 by Autodesk to aid programmers in all aspects of 2D and 3D design, building upon earlier CAD software from the 1950s-60s.
- Key concepts in AutoCAD include layers for organizing drawings, coordinate systems, drawing commands, and modifying commands for moving, rotating, copying objects. The interface provides tools for commands, views, and a drawing space to work in.
Cad cam cae
This document provides an overview of CAD (computer-aided design), CAM (computer-aided manufacturing), and CAE (computer-aided engineering). It discusses the history and definitions of these terms. CAD involves using computers to assist in the creation, modification, analysis, or optimization of a design. CAM bridges the gap between conceptual design and manufacturing. CAE uses software to simulate engineering problems like stress analysis. The document then discusses CAD topics like boundary representation, constructive solid geometry, function representation, parametric design, and examples of 2D and 3D CAD software.
RLB_Resume
Richard Broussard has over 15 years of experience in GIS and CAD software. He is proficient in AutoCAD, TerraModel, PLSCADD, Microsoft Excel, Word, Google Earth, Street Atlas, Photoshop, and Eagle Point. As a senior CAD specialist, he prepared plan and profile maps, vectorized scanned maps, and imported and exported data between various formats. He also has experience in project management, quality control, and training new employees.
Enroute woodworking 1547067548
EnRoute is CAD/CAM software for woodworking that offers a blend of artistic drawing tools and precision machining features. It has an intuitive interface and specialized tools to make designing and machining easier. The software can be used for applications like inlays, curved moldings, cabinets, and more. It includes 2D and 3D design tools, a parametric texture library, toolpathing, nesting, and CNC output capabilities. EnRoute provides designers and woodworkers with a full-featured solution for both design and manufacturing of wood projects.
Fikus presentation 2015
This presentation provides an overview of Metalcam, a European company that develops CAD/CAM solutions. It has been developing these solutions since 1991 and has customers in over 20 countries. The presentation describes Metalcam's mission to develop powerful and easy to use CAM systems that help customers gain a competitive advantage. It also outlines Metalcam's experience, partnerships, locations, and its flagship product Fikus Visualcam, a mature and reliable CAM system used by over 10,000 customers worldwide for programming CNC machines.
Presentation1
Sagar Enterprises is a company located in Nashik, India that deals with special purpose machines, fixtures, machined components, industrial automation, prototype development, 3D modeling, drafting, and mechanical and electronic assembly. The company has various lathe machines, drilling machines, sawing machines, welding equipment, and grinding machines. It provides mechanical design, finite element analysis, drafting, modeling, and consulting services to clients in various industries.
Adapt builder-floor pro-2009_spec_sheet
This document describes ADAPT-Builder 2009, a 3D finite element software for analyzing and designing concrete and post-tensioned slab and foundation systems. It provides a powerful yet easy to use tool for analyzing complex slabs and foundations. Unlike 2D programs, it performs true 3D finite element analysis for more accurate results. It also includes dynamic rebar design capabilities and integrates with Revit Structure for bidirectional BIM functionality. Key features include 3D modeling, importing various file formats, component-based assembly, finite element analysis, code checking, reinforcement design, and report generation.
Creating Sustainabie Enterprise
Impact is a global leader in sustainable business transformation and people development with 17 offices worldwide. It aims to accelerate positive social change, protect the environment, and enhance business performance. Founded in 1980 in the UK, Impact now has over 250 employees delivering services in 30 languages across 50 countries, with experience working with large organizations in various sectors. Impact provides learning journeys and training solutions to inspire new thinking and generate discussions needed to create sustainable enterprises.
Agile way vs Traditional Way
This presentation demonstrates the agile way of working on complex projects vs the traditional way and why agile lead to more success
Africa geographies of change
The document provides an overview of key topics related to Africa, including:
1) Africa has a rich history dating back to ancient civilizations but much was lost due to colonialism which entrenched misconceptions; 2) Africa is enormously diverse geographically and ethnically with many regions and over 1 billion people; 3) Africa is undergoing rapid urbanization and economic growth though challenges around poverty, inequality and unemployment remain.
Speaking advanced
The document outlines the structure and tasks for Part 1-4 of an IELTS speaking exam. In Part 1, each candidate will be asked personal questions. In Part 2, candidates will describe and compare photographs of meals and vehicles, and ask each other follow up questions. Part 3 involves discussing outdoor activity options for teenagers, considering pros and cons of each, and choosing two activities. Part 4 encourages developing the discussion topic with additional questions.
An Overview of Business and Human Rights
This document outlines the agenda and content for a presentation on business and human rights. The presentation discusses the recent trend of businesses becoming more involved in upholding human rights standards. It covers international initiatives like the UN Global Compact, and surveys of companies' recognition and commitments to labor rights, non-labor rights, and international instruments. The document also addresses how human rights relate to business risks like reputational, judicial and financial risks. It provides an action framework for developing a human rights policy and management system. Finally, it discusses the benefits of such a system, including access to markets, investor confidence, efficiency and sustainability.
Juegos en línea
Los primeros juegos en línea se remontan a las décadas de 1970 y 1980, con juegos multijugador en línea populares como League of Legends, World of Warcraft y Dota 2. Estos juegos se ejecutan en servidores en línea que permiten a los jugadores de todo el mundo competir y jugar juntos.
What happend on 21:12:12?
Musings on the subject of prophecies, dooms day predictions, and other funny ideas which seek to explain our some what fragmented future. Are we on the road to heaven or hell?
Either way we better keep our hands on the wheel
DESIGN AND OPTIMIZATION OF ELECTROSTATIC PRECIPITATOR USING FINITE ELEMENT AN...
An electrostatic precipitator is designed to trap and remove dust particles from the exhaust gas. The computer aided design and finite element analysis of electrostatic precipitator cone structure has been carried out. For static structure analysis two models (Model A and Model B) is being
considered having horizontal and vertical stiffener arrangement.
23 business i environment i society mba 2016
23 business i environment i society mba 2016Rajesh Satpathy, Regional College of Management (RCM), Bhubaneswar
The document discusses the concept and history of corporate social responsibility (CSR). It explains that CSR involves companies integrating social and environmental concerns into their business operations and stakeholder interactions. The history of CSR is traced back to companies in the late 1800s that provided benefits to employees and local communities. More recently, CSR has grown to encompass considerations around ethics, governance, human rights, the environment, and more. The concept of the "triple bottom line" is introduced as a way for companies to balance economic, social, and environmental impacts through their CSR efforts. Key components of modern CSR are identified as governance, ethics, workplace practices, supply chain management, customer satisfaction, community involvement, and environmental stewardship.Beams
OUTLINE
introduction
classification
loads
materials used
Type of reinforcement
RCC
construction methods in RCC
Analysis and design
Detailing
Basic Rules
Site visit
video
Electrostatic Smoke Precipitator (ESP)
This document discusses electrostatic smoke precipitators (ESPs), which are particulate collection devices that use electrostatic charges to remove particles like dust and smoke from gas streams. ESPs work by charging the particulate matter and attracting it to oppositely charged collection plates. The collected particulate is then removed periodically from the plates. ESPs are highly efficient and minimally impede gas flow. They work on the principle of electrophoresis and are more energy efficient than wet scrubbers. The document describes the basic components and working principles of ESPs.
Review of Compression Helical Spring for Two Wheeler Suspension Systems
This document reviews helical compression springs used in two-wheeler suspension systems. It discusses the stress distribution and characteristics of helical coil springs. Parameters that influence spring quality are examined, including weight reduction. Finite element modeling is shown to improve spring analysis. The review covers spring stability, fatigue loading, strain energy, relaxation, and prior literature on maximum tensile stresses, crack opening, and deformation modeling. It concludes that design parameters, materials, geometry, defects, and shot peening affect spring fatigue life, while temperature reduces modulus and yield strength. High stress springs should be designed based on maximum tensile stresses.
Dm plant
DM Plant is an ion exchange technology that uses two connected vessels containing cation and anion exchange resins to remove salts from water. The first vessel contains a strongly acidic cation exchange resin that converts positive salt ions to acids, which are then absorbed by a strongly basic anion exchange resin in the second vessel. Mixed bed deionizers can further purify the water by using both resin types together.
Presentation
The document provides tips for creating effective PowerPoint presentations. It advises that slides should be concise and get straight to the point without being long-winded. Content should be well-organized rather than having ideas scattered randomly. Abbreviations should also be avoided. Finally, the layout is important - the background should not be too busy, excessive bullet points and poor font/formatting should be avoided, and original, creative themes that match the presenter's personality are recommended over stock templates.
Authentic task
This document outlines a lesson plan for grade 11 students on apartheid in South Africa. The lesson has the following objectives: for students to define apartheid, explain events during apartheid, research the topic collaboratively without teacher assistance, and develop empathy for those who suffered. Students will research apartheid's atrocities by interviewing people and comparing findings in groups. They will then present their research through options like debates, role plays, or dramatizations. Students will be assessed on their understanding, research thoroughness, and collaboration.
Hani_Sidrak_cv
Hani R. Sidrak is an Egyptian music composer, arranger, pianist, and video editor with over 25 years of experience. He holds a PhD in Music from Helwan University and has extensive experience composing, arranging, and performing music. He has worked as a video editor for numerous TV stations in Kuwait and Egypt. His areas of expertise include music composition, piano tuning, visual and audio editing, and instruction.
PSH Business Profile 2019
PSH is a design company established in 2009 in Vietnam that provides CAD, CAS, and reverse engineering services. Its vision is to build a young, professional company representing Vietnam's style. PSH's core values are commitment to quality, timeliness, and sustainable development. Services include 3D CAD modeling, Computer Aided Styling with Class A surfaces, and reverse engineering with parametric models and Class A surfaces. Samples of past work include vehicle modeling in CATIA and Alias. PSH offers pilot projects free of charge to help customers assess quality.
Auto Cad Presentation
Vikas Mahajan gave a presentation on AutoCAD software. AutoCAD is a CAD software application used for 2D and 3D design. It was one of the first CAD programs to run on personal computers when initially released in 1982. The presentation demonstrated AutoCAD's capabilities like reducing complex tasks through associative features, decreasing errors with tools like IGES translation, and improving productivity with automatic dimensioning and intelligent symbols.
You Haven't Seen This 3D Engineering's Overview List on Buzzfeed
Specializing in 3D Scanning, Rapid Prototyping, Data Processing and 3D Printing. We offer a variety of services to suit all your engineering needs. Our team brings years of experience by providing clients with advanced resources and the latest in 3-D technology needed to produce precise applications
Piping engineering
The 3D Designer module provides tools for simple and rapid installation and pipeline planning. It allows for efficient derivation of drawings and sectional views from 3D models. The module fully integrates with civil engineering and steel construction work. It also enables easy preparation and manipulation of parameterized pipeline components and supports.
Bim and informatics and more
this presentation discuss the following topics :
Goal and Objective of Automation in BIM
Methods to automate
Example : Digital Fabrication
Example : 3D Molding
it also discuss the importance of development in BIM industry .
More Related Content
Viewers also liked
Creating Sustainabie Enterprise
Impact is a global leader in sustainable business transformation and people development with 17 offices worldwide. It aims to accelerate positive social change, protect the environment, and enhance business performance. Founded in 1980 in the UK, Impact now has over 250 employees delivering services in 30 languages across 50 countries, with experience working with large organizations in various sectors. Impact provides learning journeys and training solutions to inspire new thinking and generate discussions needed to create sustainable enterprises.
Agile way vs Traditional Way
This presentation demonstrates the agile way of working on complex projects vs the traditional way and why agile lead to more success
Africa geographies of change
The document provides an overview of key topics related to Africa, including:
1) Africa has a rich history dating back to ancient civilizations but much was lost due to colonialism which entrenched misconceptions; 2) Africa is enormously diverse geographically and ethnically with many regions and over 1 billion people; 3) Africa is undergoing rapid urbanization and economic growth though challenges around poverty, inequality and unemployment remain.
Speaking advanced
The document outlines the structure and tasks for Part 1-4 of an IELTS speaking exam. In Part 1, each candidate will be asked personal questions. In Part 2, candidates will describe and compare photographs of meals and vehicles, and ask each other follow up questions. Part 3 involves discussing outdoor activity options for teenagers, considering pros and cons of each, and choosing two activities. Part 4 encourages developing the discussion topic with additional questions.
An Overview of Business and Human Rights
This document outlines the agenda and content for a presentation on business and human rights. The presentation discusses the recent trend of businesses becoming more involved in upholding human rights standards. It covers international initiatives like the UN Global Compact, and surveys of companies' recognition and commitments to labor rights, non-labor rights, and international instruments. The document also addresses how human rights relate to business risks like reputational, judicial and financial risks. It provides an action framework for developing a human rights policy and management system. Finally, it discusses the benefits of such a system, including access to markets, investor confidence, efficiency and sustainability.
Juegos en línea
Los primeros juegos en línea se remontan a las décadas de 1970 y 1980, con juegos multijugador en línea populares como League of Legends, World of Warcraft y Dota 2. Estos juegos se ejecutan en servidores en línea que permiten a los jugadores de todo el mundo competir y jugar juntos.
What happend on 21:12:12?
Musings on the subject of prophecies, dooms day predictions, and other funny ideas which seek to explain our some what fragmented future. Are we on the road to heaven or hell?
Either way we better keep our hands on the wheel
DESIGN AND OPTIMIZATION OF ELECTROSTATIC PRECIPITATOR USING FINITE ELEMENT AN...
An electrostatic precipitator is designed to trap and remove dust particles from the exhaust gas. The computer aided design and finite element analysis of electrostatic precipitator cone structure has been carried out. For static structure analysis two models (Model A and Model B) is being
considered having horizontal and vertical stiffener arrangement.
23 business i environment i society mba 2016
23 business i environment i society mba 2016Rajesh Satpathy, Regional College of Management (RCM), Bhubaneswar
The document discusses the concept and history of corporate social responsibility (CSR). It explains that CSR involves companies integrating social and environmental concerns into their business operations and stakeholder interactions. The history of CSR is traced back to companies in the late 1800s that provided benefits to employees and local communities. More recently, CSR has grown to encompass considerations around ethics, governance, human rights, the environment, and more. The concept of the "triple bottom line" is introduced as a way for companies to balance economic, social, and environmental impacts through their CSR efforts. Key components of modern CSR are identified as governance, ethics, workplace practices, supply chain management, customer satisfaction, community involvement, and environmental stewardship.Beams
OUTLINE
introduction
classification
loads
materials used
Type of reinforcement
RCC
construction methods in RCC
Analysis and design
Detailing
Basic Rules
Site visit
video
Electrostatic Smoke Precipitator (ESP)
This document discusses electrostatic smoke precipitators (ESPs), which are particulate collection devices that use electrostatic charges to remove particles like dust and smoke from gas streams. ESPs work by charging the particulate matter and attracting it to oppositely charged collection plates. The collected particulate is then removed periodically from the plates. ESPs are highly efficient and minimally impede gas flow. They work on the principle of electrophoresis and are more energy efficient than wet scrubbers. The document describes the basic components and working principles of ESPs.
Review of Compression Helical Spring for Two Wheeler Suspension Systems
This document reviews helical compression springs used in two-wheeler suspension systems. It discusses the stress distribution and characteristics of helical coil springs. Parameters that influence spring quality are examined, including weight reduction. Finite element modeling is shown to improve spring analysis. The review covers spring stability, fatigue loading, strain energy, relaxation, and prior literature on maximum tensile stresses, crack opening, and deformation modeling. It concludes that design parameters, materials, geometry, defects, and shot peening affect spring fatigue life, while temperature reduces modulus and yield strength. High stress springs should be designed based on maximum tensile stresses.
Dm plant
DM Plant is an ion exchange technology that uses two connected vessels containing cation and anion exchange resins to remove salts from water. The first vessel contains a strongly acidic cation exchange resin that converts positive salt ions to acids, which are then absorbed by a strongly basic anion exchange resin in the second vessel. Mixed bed deionizers can further purify the water by using both resin types together.
Presentation
The document provides tips for creating effective PowerPoint presentations. It advises that slides should be concise and get straight to the point without being long-winded. Content should be well-organized rather than having ideas scattered randomly. Abbreviations should also be avoided. Finally, the layout is important - the background should not be too busy, excessive bullet points and poor font/formatting should be avoided, and original, creative themes that match the presenter's personality are recommended over stock templates.
Authentic task
This document outlines a lesson plan for grade 11 students on apartheid in South Africa. The lesson has the following objectives: for students to define apartheid, explain events during apartheid, research the topic collaboratively without teacher assistance, and develop empathy for those who suffered. Students will research apartheid's atrocities by interviewing people and comparing findings in groups. They will then present their research through options like debates, role plays, or dramatizations. Students will be assessed on their understanding, research thoroughness, and collaboration.
Hani_Sidrak_cv
Hani R. Sidrak is an Egyptian music composer, arranger, pianist, and video editor with over 25 years of experience. He holds a PhD in Music from Helwan University and has extensive experience composing, arranging, and performing music. He has worked as a video editor for numerous TV stations in Kuwait and Egypt. His areas of expertise include music composition, piano tuning, visual and audio editing, and instruction.
Viewers also liked (17)
DESIGN AND OPTIMIZATION OF ELECTROSTATIC PRECIPITATOR USING FINITE ELEMENT AN...
DESIGN AND OPTIMIZATION OF ELECTROSTATIC PRECIPITATOR USING FINITE ELEMENT AN...
Review of Compression Helical Spring for Two Wheeler Suspension Systems
Review of Compression Helical Spring for Two Wheeler Suspension Systems
Similar to Our Output Data in Reverse Engineering Service
PSH Business Profile 2019
PSH is a design company established in 2009 in Vietnam that provides CAD, CAS, and reverse engineering services. Its vision is to build a young, professional company representing Vietnam's style. PSH's core values are commitment to quality, timeliness, and sustainable development. Services include 3D CAD modeling, Computer Aided Styling with Class A surfaces, and reverse engineering with parametric models and Class A surfaces. Samples of past work include vehicle modeling in CATIA and Alias. PSH offers pilot projects free of charge to help customers assess quality.
Auto Cad Presentation
Vikas Mahajan gave a presentation on AutoCAD software. AutoCAD is a CAD software application used for 2D and 3D design. It was one of the first CAD programs to run on personal computers when initially released in 1982. The presentation demonstrated AutoCAD's capabilities like reducing complex tasks through associative features, decreasing errors with tools like IGES translation, and improving productivity with automatic dimensioning and intelligent symbols.
You Haven't Seen This 3D Engineering's Overview List on Buzzfeed
Specializing in 3D Scanning, Rapid Prototyping, Data Processing and 3D Printing. We offer a variety of services to suit all your engineering needs. Our team brings years of experience by providing clients with advanced resources and the latest in 3-D technology needed to produce precise applications
Piping engineering
The 3D Designer module provides tools for simple and rapid installation and pipeline planning. It allows for efficient derivation of drawings and sectional views from 3D models. The module fully integrates with civil engineering and steel construction work. It also enables easy preparation and manipulation of parameterized pipeline components and supports.
Bim and informatics and more
this presentation discuss the following topics :
Goal and Objective of Automation in BIM
Methods to automate
Example : Digital Fabrication
Example : 3D Molding
it also discuss the importance of development in BIM industry .
Sap2000 v10
SAP2000 is finite element analysis software for structural engineering that allows 3D modeling and analysis of structures like buildings and bridges. It can analyze static and dynamic load cases, perform reinforced concrete and steel design, and has modules for bridge, offshore, and soil-structure interaction modeling. The software features a powerful graphical interface for modeling, analysis, post-processing, and design within a single integrated environment.
Structural Computer Aided Design and Analysis Professional SCADA Pro 16
SCADA Pro is a structural analysis and design software that has been in development for 38 years. It supports the analysis, design, and optimization of various structural materials including concrete, steel, timber, masonry, and composites. It has a user-friendly interface and supports import and export to other structural software. SCADA Pro can automatically generate structural models from architectural files and perform both static and dynamic analysis as well as structural design checks according to various international codes.
Top 8 Tips to Take your Design from CAD Drawing to CNC Fabrication
Scan2CAD is used throughout the CNC process -- from sketch, to CAD design and finally, fabricated in CNC! This document walks you through the most common design approaches. Our experts also shared 8 top tips that you should take note of when designing for CNC (scaling, overlapping objects and more!)
Advanced Computer Aided Design ACAD
Acquire fundamentals and knowledge
in order to use different CAD Systems according to the drawing, design or project to produce
Ironcad
The document summarizes two CAD software programs: IronCAD and the NISA family of software. For IronCAD, it describes the key benefits as improved design productivity through its drag and drop interface, design flexibility through its dual kernel support and direct face modeling, and ease of use features. It also allows fully associative production drawings. For NISA, it describes the various analysis modules in the family including static/dynamic analysis, rotor dynamics, composites, heat transfer, fatigue, and computational fluid dynamics. NISA includes a graphics pre and post-processor called DISPLAY.
MivneCAD En
A tool for complete design of reinforced concrete buildings
CUBUS Engineering Software Israel
Pioneering Revolutionary Technology
Static and Seismic calculations carried out on the same data
Unit 1 INTRODUCTION (COMPUTER AIDED DESIGN AND MANUFACTURING )
UNIT I INTRODUCTION 9
Product cycle- Design process- sequential and concurrent engineering- Computer aided design –
CAD system architecture- Computer graphics – co-ordinate systems- 2D and 3D transformationshomogeneous
coordinates
- Line drawing -Clipping- viewing transformation-Brief introduction to CAD
and CAM – Manufacturing Planning, Manufacturing control- Introduction to CAD/CAM –CAD/CAM
concepts ––Types of production - Manufacturing models and Metrics – Mathematical models of
Production Performance
Diy 3d scanning for 3D print - Makerfest India
This document provides an overview of DIY 3D scanning techniques for 3D printing, including types of scanning methods and instructions for setting up Kinect and DAVID scanning. It also outlines the file preparation workflow needed to repair scanned files, including filling holes, smoothing, and fixing geometry issues, in order to produce a watertight STL file suitable for 3D printing.
Lect 02_Introduction to Computer Aided Design.pptx
This document provides an introduction and overview of computer-aided design (CAD) and computer-aided manufacturing (CAM). It discusses that CAD-CAM refers to using computer software to design products and program manufacturing processes. It is now used across many industries like automotive, textile, aerospace, and medical. CAD models help ensure manufacturability and allow for failure analysis and optimization. CAM simulations can analyze tool wear and make manufacturing decisions. CAD-CAM provides benefits like reducing costs through iterative design changes and catching issues earlier in the design process. The document also outlines key features that CAD packages provide like geometric modeling, editing tools, display controls, drafting features, programming interfaces, and analysis capabilities.
Reverse Engineering of The Taj Mahal
Reverse Engineering of The Taj Mahal- An Abstract of The Project
The Taj Mahal at Agra, India is one of the wonders of the world. The Taj Mahal is Considered as World Heritage Site. The Taj Mahal is a Symbol of True Love.
solidworks vs mytools utilities features
The document describes myCADtools, a software add-on for SOLIDWORKS. It provides over 30 utilities to enhance SOLIDWORKS functionality. Some key utilities described are SelectMaterial for applying materials to parts, CurveEquation for creating curves from mathematical equations, DriveAssembly for animating assemblies based on dimensions, and AssemblyBoard for automatically generating exploded views and bills of materials from assemblies. The utilities aim to improve efficiency, standardization, and communication compared to using SOLIDWORKS alone.
Chapter02.structural design using staad pro
The document discusses the use of computer programs like STAAD Pro for structural design and analysis. It explains how earlier structural designs were done manually using slide rules and calculators but computers now allow for more accurate analysis of frames, beams and modeling of entire buildings in 3D. STAAD Pro is highlighted as a powerful program that can be used for 3D modeling and analysis of multi-storied buildings, offering various analysis types and design capabilities for steel, concrete and other materials according to different codes.
SHIV SINGH_Catia V5 Mechanical Surface Design Specialist
Shiv Singh is a Catia V5 Mechanical Surface Design Specialist seeking a position where he can enhance his skills. He has a B.Tech in Mechanical Engineering and 3 years of experience designing automotive interior and exterior plastic trims using Catia V5. His skills include surface design, parametric modeling, drafting, clash analysis, and converting 2D drawings to 3D models. Sample projects include designing door trim substrates and bumper grills for cars.
Six D India Reverse Engineering, 3D Inspection & 3D Laser Scanning
This document provides an overview of 3D scanning, reverse engineering, inspection, and additive manufacturing services offered by Six D India. It discusses capabilities including component scanning sizes, scanner systems, inspection software, CAD modeling from scan data, rapid prototyping, 3D printers, and applications across industries like aerospace, automotive, and healthcare. The document aims to showcase Six D India's technical expertise and range of advanced engineering services.
Six d india reverse engineering & 3 d inspection
We are design engineering company and provide the solution to Automotive, Oil & Gas, Power plants, Manufacturing Industries etc.
Similar to Our Output Data in Reverse Engineering Service (20)
You Haven't Seen This 3D Engineering's Overview List on Buzzfeed
You Haven't Seen This 3D Engineering's Overview List on Buzzfeed
Structural Computer Aided Design and Analysis Professional SCADA Pro 16
Structural Computer Aided Design and Analysis Professional SCADA Pro 16
Top 8 Tips to Take your Design from CAD Drawing to CNC Fabrication
Top 8 Tips to Take your Design from CAD Drawing to CNC Fabrication
Unit 1 INTRODUCTION (COMPUTER AIDED DESIGN AND MANUFACTURING )
Unit 1 INTRODUCTION (COMPUTER AIDED DESIGN AND MANUFACTURING )
Lect 02_Introduction to Computer Aided Design.pptx
Lect 02_Introduction to Computer Aided Design.pptx
SHIV SINGH_Catia V5 Mechanical Surface Design Specialist
SHIV SINGH_Catia V5 Mechanical Surface Design Specialist
Six D India Reverse Engineering, 3D Inspection & 3D Laser Scanning
Six D India Reverse Engineering, 3D Inspection & 3D Laser Scanning
Six d india reverse engineering & 3 d inspection
Six d india reverse engineering & 3 d inspection
More from PSH Mechanical Design
8.8 Engine Block in RE with native Solidworks outputdata
8.8 Engine Block in RE with native Solidworks outputdata
Aircaft in reverse engineering
Do you want to create 3D model data from scanned data ( RE ) / CAD / CAS ? Please contact us today !
We have Professional Team & Office in Germany and Viet Nam
We can create almost native CAD files in output & High Quality Surface
2 d to 3d cad modeling serive
from 2d Autocad drawing , scan , pdf , ... to 3D Modeling in CATIA , Siemen NX , SolidEdge , Solidworks , Inventor , Pro/e , Creo , Autocad 3D ,
Supported languages: English, German, Japanese, Korean
Plant Design from laser Scan Data
Our services are available with the highest quality with PointSense Plant , AutoCAD Plant 3D , Design X
Output file :
-PointSense Plant
-Autocad 2D , 3D
-original parametric Solidworks , Inventor 2016
- Design X file
Boat (12meters) in Reverse Engineering- PSH update 2016
Let's see what we can do with the scanned data of boat 12 meters long in Reverse Engineering
Snowman in Reverse Engineering
Point cloud data consists of a set of data points in 3D space that represent the surface of an object or scene. Surface model data takes point cloud data and fits geometric surfaces like triangles to create a 3D mesh representation. Together, point cloud and surface model data are important formats for 3D scanning and modeling applications.
Comperessor wheel in Reverse Engineering _ PSH Update 12.2015
with the output : parameter model & original file in SolidWorks, NX, SolidEgde, Inventor, Pro / Creo, Catia, Autocad
Casting part in reverse engineering psh works update
Casting Part in Reverse Engineering with full parametric Mode_PSH Update
Mode with full parameters and original in Solidworks, Catia, Solid Edge, Pro / Creo, Inventor, Autocad
More from PSH Mechanical Design (20)
8.8 Engine Block in RE with native Solidworks outputdata
8.8 Engine Block in RE with native Solidworks outputdata
Boat (12meters) in Reverse Engineering- PSH update 2016
Boat (12meters) in Reverse Engineering- PSH update 2016
Comperessor wheel in Reverse Engineering _ PSH Update 12.2015
Comperessor wheel in Reverse Engineering _ PSH Update 12.2015
Casting part in reverse engineering psh works update
Casting part in reverse engineering psh works update
Recently uploaded
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
The Fourth Industrial Revolution is transforming industries, including healthcare, by integrating digital,
physical, and biological technologies. This study examines the integration of 4.0 technologies into
healthcare, identifying success factors and challenges through interviews with 70 stakeholders from 33
countries. Healthcare is evolving significantly, with varied objectives across nations aiming to improve
population health. The study explores stakeholders' perceptions on critical success factors, identifying
challenges such as insufficiently trained personnel, organizational silos, and structural barriers to data
exchange. Facilitators for integration include cost reduction initiatives and interoperability policies.
Technologies like IoT, Big Data, AI, Machine Learning, and robotics enhance diagnostics, treatment
precision, and real-time monitoring, reducing errors and optimizing resource utilization. Automation
improves employee satisfaction and patient care, while Blockchain and telemedicine drive cost reductions.
Successful integration requires skilled professionals and supportive policies, promising efficient resource
use, lower error rates, and accelerated processes, leading to optimized global healthcare outcomes.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Recently uploaded (20)
gray level transformation unit 3(image processing))
gray level transformation unit 3(image processing))
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Our Output Data in Reverse Engineering Service
- 1. Reverse Engineering & Type of Output Data : - CAD data converted from scan data. - Can ignore or incorporate manufacturing defects. - Parametric solid model (SolidWorks, Inventor, NX, Creo, Catia…). - Modify model parametrically. - CAD data converted from scan data. - Can ignore or incorporate manufacturing defects. - Export IGES (STEP…) surfaces or solid. - Modifications require re-trimming. - Captures as-built state. - Includes manufacturing defects. - Patch-work of small surfaces. - Modifications to the file are going to be made. - 2D drawings are needed. - Surface finish must be smooth. - Few modifications to the file are going to be made. - 2D drawings are needed. - Surface finish must be smooth. - Designing parts to fit as-built state. - Surface finish is not critical. - Free form shapes (Sculpture… ). Parametric Model Hybrid Surface NURBS Surface a Characteristic s When to Use