TS-04A 150X20mm WPC outdoor decking
•
1 like•582 views
威
威 小This document provides specifications and installation instructions for the TS-04A deck board profile. The profile is 150mm wide and 20mm thick. It includes diagrams showing how to install the boards with tie plates and fixing studs screwed into channels between boards. The document also describes the company, Coowin, as a manufacturer of WPC products for 16 years that exports to over 50 countries, with packaging allowing transport of up to 7300 meters of product in a single shipping container.
Report
Share
Report
Share
Download to read offline
Recommended
TW-02 (150x25mm) outdoor wpc decking
The document summarizes COOWIN's TW-02 WPC decking floor product. It includes specifications on the profile, thickness, and installation instructions. COOWIN is a leading Chinese manufacturer of WPC products that has exported to over 50 countries. They can package and ship a maximum of 6000 meters of product per container for convenient and safe transport.
WPC outdoor solid decking floor 134x24mm
This document provides specifications and installation instructions for the TH-16 deck board profile. Key details include:
- Dimensions of 134mm width and 24mm thickness
- Installation involves placing boards abreast, inserting upright tie plates under boards every 25-35cm, adding fixing studs between boards, and screwing everything together.
- COOWIN is a Chinese manufacturer of WPC products with 16 years of experience exporting to over 50 countries worldwide. Cargo shipments contain approximately 6000 meters of deck boards packaged safely for transport.
TW-K01(150X35mm) outdoor wpc decking floor
1) Install deck boards side by side and secure them with tie plates and fixing studs placed every 25-35cm under the boards and between boards. Screw the fixing studs down to fasten the connection.
2) The finished project will provide over 4400 meters of decking material packaged safely for international shipping.
3) COOWIN is a leading Chinese manufacturer of WPC decking products with 16 years of experience that exports its products to over 50 countries worldwide.
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...Jacton Electromechanical Co.,Ltd
worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet
The document provides information on the WGO135 cable gripping and lifting tool. It can lift up to 20 tonnes and grip cables with diameters up to 135mm. Made of corrosion resistant aluminum and stainless steel, it is robust, lightweight, and can be used at any water depth to retrieve and decommission cables and umbilicals. It has a secondary locking system to ensure the grip does not release during lifting.
Safety clamp
WA series Safety Clamps are designed for clamp the drilling pipe, drilling collar, and casing with diameter smaller than 5-1/2” --- Torlins handing tools supplier
Double Acting Riveting System June 04
Typical manual tool used for production lines. Can be set up for body shop use. Cycle times are roughly 1 sec per joint.
Flexco Heavy Duty Fastener Applications
PPS UK are exclusive distributors of Flexco products in West Africa - Process & Plant Sales Limited Tel: +44 1902 495 913 Email: james.wood@processandplant.co.uk
Ghana, Mali, Cote D'Ivoire, Burkina Faso, Mauritania, Senegal, Liberia, Togo, Sierra Leone etc.
Recommended
TW-02 (150x25mm) outdoor wpc decking
The document summarizes COOWIN's TW-02 WPC decking floor product. It includes specifications on the profile, thickness, and installation instructions. COOWIN is a leading Chinese manufacturer of WPC products that has exported to over 50 countries. They can package and ship a maximum of 6000 meters of product per container for convenient and safe transport.
WPC outdoor solid decking floor 134x24mm
This document provides specifications and installation instructions for the TH-16 deck board profile. Key details include:
- Dimensions of 134mm width and 24mm thickness
- Installation involves placing boards abreast, inserting upright tie plates under boards every 25-35cm, adding fixing studs between boards, and screwing everything together.
- COOWIN is a Chinese manufacturer of WPC products with 16 years of experience exporting to over 50 countries worldwide. Cargo shipments contain approximately 6000 meters of deck boards packaged safely for transport.
TW-K01(150X35mm) outdoor wpc decking floor
1) Install deck boards side by side and secure them with tie plates and fixing studs placed every 25-35cm under the boards and between boards. Screw the fixing studs down to fasten the connection.
2) The finished project will provide over 4400 meters of decking material packaged safely for international shipping.
3) COOWIN is a leading Chinese manufacturer of WPC decking products with 16 years of experience that exports its products to over 50 countries worldwide.
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...Jacton Electromechanical Co.,Ltd
worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet
The document provides information on the WGO135 cable gripping and lifting tool. It can lift up to 20 tonnes and grip cables with diameters up to 135mm. Made of corrosion resistant aluminum and stainless steel, it is robust, lightweight, and can be used at any water depth to retrieve and decommission cables and umbilicals. It has a secondary locking system to ensure the grip does not release during lifting.
Safety clamp
WA series Safety Clamps are designed for clamp the drilling pipe, drilling collar, and casing with diameter smaller than 5-1/2” --- Torlins handing tools supplier
Double Acting Riveting System June 04
Typical manual tool used for production lines. Can be set up for body shop use. Cycle times are roughly 1 sec per joint.
Flexco Heavy Duty Fastener Applications
PPS UK are exclusive distributors of Flexco products in West Africa - Process & Plant Sales Limited Tel: +44 1902 495 913 Email: james.wood@processandplant.co.uk
Ghana, Mali, Cote D'Ivoire, Burkina Faso, Mauritania, Senegal, Liberia, Togo, Sierra Leone etc.
Shandwood Brochure
The document discusses Shandwood Engineering Ltd, a market leader in innovative oilfield screw conveyors. It describes their Easi-Fit screw conveyor which features easy assembly and maintenance capabilities. This helps reduce non-productive time on rigs. The conveyors are fully certified and comply with all applicable safety standards. Shandwood also has a global reach with facilities in Scotland, Singapore, and Dubai to support customers worldwide.
Ray am hafele
This document provides information about undermounted concealed and single extension soft closing runners from Hafele including installation instructions, drilling patterns, dimensions, load bearing capacities up to 30 kg, lengths available from 300 to 550 mm, and catalog numbers with prices in VND. specifications are subject to change without notice. The runners are for internal use only.
Webtool HCV155 Cable Umbilical and Riser Cutter - Data Sheet
This document provides information about the HCV155 cable/umbilical/riser cutter tool. It can cut materials up to 155mm in diameter, works at any water depth, and has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The tool weighs approximately 162kg and is made of robust plated steel to resist corrosion with a long-lasting blade. It is suitable for heavy duty cutting of cables, lines, and risers in severe conditions.
Cone crusher wear parts from hubei jys advanced wear resistant material techn...
hubei jys advanced wear resistant material technology co.;ltd specialized in manufacturing cone crusher wear parts.Brands include: Metso,sandvik,symons,telsmith,terex,etc
Filoform straight cable joints
The Filoform range of cast resin Straight Joints are approved for use with armored and unarmored cables up to 1kv. The joints can be used on cable types including PILC, XLPE, PVC and EPR. Standard Straight Joints can be upgraded to 3.3kv with a supplementary kit. The joints feature hydrolysis resistant polyurethane resin in a transparent bag, strong transparent shells, and are fully waterproof.
Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
This document provides information about the HCV270 cable, umbilical, and riser cutter. The cutter can cut items up to 270mm in diameter, can be used at any water depth, and is suitable for cutting cables, hydraulic lines, risers, and umbilicals. It has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The cutter weighs approximately 352kg and has a robust, corrosion-resistant steel construction.
CADENAS-GRIP_LINK
The document summarizes Kinedyne's tire chain products and just-in-time delivery system. It provides details on their various tire chain models including the materials used, number of cross/side links, and packaging. It also outlines their simple 7-step process for installing the tire chains and includes contact information for ordering.
Fused Silica Capillary Columns
Quadrex Corp takes pride in their manufacturing technology and quality control processes. They produce fused silica columns with polyimide coatings for general GC applications up to 390°C or higher temperature coatings upon request. Ultra ALLOY stainless steel columns are also available in standard sizes with various bonded phases and maximum operating temperatures. The company aims to satisfy customers with specialized technical support in over 50 countries.
Prysmian BICON G10TS Hydraulic Crimping Tools
Prysmian BICC BICON G10TS hydraulic crimping tools are suitable forcrimping low voltage and high voltage cable lugs up to 400sqmm and cable splices up to 300sqmm - an extensive range of Prysmian BICON crimping die sets are available to suit Prysmian G10TS including hexagon, indent and circumferential dies. The Prysmian U-PO pre-rounding dies enable sector shaped aluminium conductors to be formed before fitting circular shaped crimp connectors.
Prysmian BICC BICON G10TS Hydraulic Crimping Tools:
Two stage hydraulic crimping tool
11.5 tonne crimping force with quick ram advance
Suits U Type crimping die sets
Prysmian BICC BICON Die Sets:
Nest die (SAC) - UNA
Nest die (Copper) - UNX-C
Indentor die (SAC) - UP-A
Indentor die (Copper) - UP-C
Hexagonal die set (Aluminium) - U
Hexagonal die set (Copper) - U-CHEX
Deep indent die set (Aluminium) - U-D1
Prysmian BICC BICON G10TS crimping tool (hydraulic) suits 10sqmm, 16sqmm, 25sqmm, 35sqmm, 50sqmm, 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm, 300sqmm and 400sqmm cable conductors.
Prysmian BICC BICON U10CHEX Crimp Tool Die Set - 10sqmm Copper
The document lists various tooling components for compression tools. It includes a range of U-type hexagonal die sets from 10mm to 400mm that can be used with two-stage hydraulic tools to crimp BICON compression connectors onto aluminum or copper cables. The tools deliver 11.5 tonnes of compressive force and include overload protection to ensure crimp reliability. They can accept interchangeable die sets for different cable and lug sizes up to 400mm2.
COOWIN Outdoor WPC Decking Floor Catelog
This document is a catalogue for WPC decking floor products. It lists various decking floor models along with their surface type, size, groove style if any, and finishing treatment. The models include hollow and solid decking floors of different sizes ranging from 140x21mm to 150x35mm. Some have grooves, embossing, or sanding finishes. The catalogue also provides contact information for Qingdao Barefoot Construction Material Co., Ltd. in Qingdao, China, the manufacturer of these WPC decking floor products.
TF-04S(150x21mm) outdoor wood plastic composite cladding
TF-04S(150x21mm) outdoor wood plastic composite cladding
Análisis de problemas y tomas de decisiones
Este documento describe los diferentes tipos de toma de decisiones, incluyendo decisiones individuales, grupales, diarias, esporádicas, con certidumbre, en condiciones de riesgo y programadas. También explica los criterios para tomar buenas decisiones como la eficacia, eficiencia y consistencia. Finalmente, distingue entre tomar decisiones bajo condiciones de certeza, incertidumbre y riesgo.
Como crear una factura en excel 2016
Este documento proporciona instrucciones en 9 pasos para crear una factura en Excel 2016, incluyendo agregar encabezados, dejar espacios para los detalles de la factura, calcular el subtotal, IVA y total aplicando fórmulas, y agregar formato de moneda. Siguiendo estos pasos, se puede generar fácilmente una factura en Excel con cálculos automáticos.
Udaan
Udaan is a leading mobile based news application where people get and experience news on different topics and categories.
Poncho zule.....
Emiliano y Poncho Zuleta fueron hermanos y músicos vallenatos colombianos que tuvieron una exitosa carrera musical juntos. Emiliano compitió en el primer Festival de la Leyenda Vallenata de 1968, obteniendo el segundo lugar. En 2000, los hermanos decidieron formar agrupaciones independientes. Durante el 49° Festival Vallenato, Emiliano y Poncho Zuleta recibieron un homenaje por su gran contribución a la música vallenata de Colombia.
More Related Content
What's hot
Shandwood Brochure
The document discusses Shandwood Engineering Ltd, a market leader in innovative oilfield screw conveyors. It describes their Easi-Fit screw conveyor which features easy assembly and maintenance capabilities. This helps reduce non-productive time on rigs. The conveyors are fully certified and comply with all applicable safety standards. Shandwood also has a global reach with facilities in Scotland, Singapore, and Dubai to support customers worldwide.
Ray am hafele
This document provides information about undermounted concealed and single extension soft closing runners from Hafele including installation instructions, drilling patterns, dimensions, load bearing capacities up to 30 kg, lengths available from 300 to 550 mm, and catalog numbers with prices in VND. specifications are subject to change without notice. The runners are for internal use only.
Webtool HCV155 Cable Umbilical and Riser Cutter - Data Sheet
This document provides information about the HCV155 cable/umbilical/riser cutter tool. It can cut materials up to 155mm in diameter, works at any water depth, and has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The tool weighs approximately 162kg and is made of robust plated steel to resist corrosion with a long-lasting blade. It is suitable for heavy duty cutting of cables, lines, and risers in severe conditions.
Cone crusher wear parts from hubei jys advanced wear resistant material techn...
hubei jys advanced wear resistant material technology co.;ltd specialized in manufacturing cone crusher wear parts.Brands include: Metso,sandvik,symons,telsmith,terex,etc
Filoform straight cable joints
The Filoform range of cast resin Straight Joints are approved for use with armored and unarmored cables up to 1kv. The joints can be used on cable types including PILC, XLPE, PVC and EPR. Standard Straight Joints can be upgraded to 3.3kv with a supplementary kit. The joints feature hydrolysis resistant polyurethane resin in a transparent bag, strong transparent shells, and are fully waterproof.
Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
This document provides information about the HCV270 cable, umbilical, and riser cutter. The cutter can cut items up to 270mm in diameter, can be used at any water depth, and is suitable for cutting cables, hydraulic lines, risers, and umbilicals. It has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The cutter weighs approximately 352kg and has a robust, corrosion-resistant steel construction.
CADENAS-GRIP_LINK
The document summarizes Kinedyne's tire chain products and just-in-time delivery system. It provides details on their various tire chain models including the materials used, number of cross/side links, and packaging. It also outlines their simple 7-step process for installing the tire chains and includes contact information for ordering.
Fused Silica Capillary Columns
Quadrex Corp takes pride in their manufacturing technology and quality control processes. They produce fused silica columns with polyimide coatings for general GC applications up to 390°C or higher temperature coatings upon request. Ultra ALLOY stainless steel columns are also available in standard sizes with various bonded phases and maximum operating temperatures. The company aims to satisfy customers with specialized technical support in over 50 countries.
Prysmian BICON G10TS Hydraulic Crimping Tools
Prysmian BICC BICON G10TS hydraulic crimping tools are suitable forcrimping low voltage and high voltage cable lugs up to 400sqmm and cable splices up to 300sqmm - an extensive range of Prysmian BICON crimping die sets are available to suit Prysmian G10TS including hexagon, indent and circumferential dies. The Prysmian U-PO pre-rounding dies enable sector shaped aluminium conductors to be formed before fitting circular shaped crimp connectors.
Prysmian BICC BICON G10TS Hydraulic Crimping Tools:
Two stage hydraulic crimping tool
11.5 tonne crimping force with quick ram advance
Suits U Type crimping die sets
Prysmian BICC BICON Die Sets:
Nest die (SAC) - UNA
Nest die (Copper) - UNX-C
Indentor die (SAC) - UP-A
Indentor die (Copper) - UP-C
Hexagonal die set (Aluminium) - U
Hexagonal die set (Copper) - U-CHEX
Deep indent die set (Aluminium) - U-D1
Prysmian BICC BICON G10TS crimping tool (hydraulic) suits 10sqmm, 16sqmm, 25sqmm, 35sqmm, 50sqmm, 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm, 300sqmm and 400sqmm cable conductors.
Prysmian BICC BICON U10CHEX Crimp Tool Die Set - 10sqmm Copper
The document lists various tooling components for compression tools. It includes a range of U-type hexagonal die sets from 10mm to 400mm that can be used with two-stage hydraulic tools to crimp BICON compression connectors onto aluminum or copper cables. The tools deliver 11.5 tonnes of compressive force and include overload protection to ensure crimp reliability. They can accept interchangeable die sets for different cable and lug sizes up to 400mm2.
What's hot (10)
Webtool HCV155 Cable Umbilical and Riser Cutter - Data Sheet
Webtool HCV155 Cable Umbilical and Riser Cutter - Data Sheet
Cone crusher wear parts from hubei jys advanced wear resistant material techn...
Cone crusher wear parts from hubei jys advanced wear resistant material techn...
Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
Prysmian BICC BICON U10CHEX Crimp Tool Die Set - 10sqmm Copper
Prysmian BICC BICON U10CHEX Crimp Tool Die Set - 10sqmm Copper
Viewers also liked
COOWIN Outdoor WPC Decking Floor Catelog
This document is a catalogue for WPC decking floor products. It lists various decking floor models along with their surface type, size, groove style if any, and finishing treatment. The models include hollow and solid decking floors of different sizes ranging from 140x21mm to 150x35mm. Some have grooves, embossing, or sanding finishes. The catalogue also provides contact information for Qingdao Barefoot Construction Material Co., Ltd. in Qingdao, China, the manufacturer of these WPC decking floor products.
TF-04S(150x21mm) outdoor wood plastic composite cladding
TF-04S(150x21mm) outdoor wood plastic composite cladding
Análisis de problemas y tomas de decisiones
Este documento describe los diferentes tipos de toma de decisiones, incluyendo decisiones individuales, grupales, diarias, esporádicas, con certidumbre, en condiciones de riesgo y programadas. También explica los criterios para tomar buenas decisiones como la eficacia, eficiencia y consistencia. Finalmente, distingue entre tomar decisiones bajo condiciones de certeza, incertidumbre y riesgo.
Como crear una factura en excel 2016
Este documento proporciona instrucciones en 9 pasos para crear una factura en Excel 2016, incluyendo agregar encabezados, dejar espacios para los detalles de la factura, calcular el subtotal, IVA y total aplicando fórmulas, y agregar formato de moneda. Siguiendo estos pasos, se puede generar fácilmente una factura en Excel con cálculos automáticos.
Udaan
Udaan is a leading mobile based news application where people get and experience news on different topics and categories.
Poncho zule.....
Emiliano y Poncho Zuleta fueron hermanos y músicos vallenatos colombianos que tuvieron una exitosa carrera musical juntos. Emiliano compitió en el primer Festival de la Leyenda Vallenata de 1968, obteniendo el segundo lugar. En 2000, los hermanos decidieron formar agrupaciones independientes. Durante el 49° Festival Vallenato, Emiliano y Poncho Zuleta recibieron un homenaje por su gran contribución a la música vallenata de Colombia.
Mayo clinic
Mayo Clinic is the first and largest integrated not-for-profit
medical group practice in the world. William and Charles
Mayo founded the clinic over 100 years ago as a small
outpatient facility and pioneered the concept of a medical
group practice—a model that is widely used today.
Final work
This document is a dissertation submitted by Kayitare Erick to the School of Statistics and Planning at Makerere University in partial fulfillment of the requirements for a Bachelor of Science degree in Quantitative Economics. The dissertation analyzes diabetes cases in Rwanda from 2006-2015 using data collected from Kirehe Hospital. It includes chapters on introduction, literature review, methodology, results, and conclusions. The study aims to examine trends in diabetes cases over time by type of diabetes, sex, and age group using statistical analysis methods. Key findings and recommendations for diabetes prevention and management in Rwanda are also provided.
Shipping Operations Manager Overview
The job of Shipping Operations Manager within the industry is a very rewarding and interesting position. In this role, you would be part of a team of people who are responsible for the day to day operations of a vessel, which means that your daily tasks would be very hands-on and interactive.
Viewers also liked (15)
TF-04S(150x21mm) outdoor wood plastic composite cladding
TF-04S(150x21mm) outdoor wood plastic composite cladding
Similar to TS-04A 150X20mm WPC outdoor decking
5S Systems Catalogue
5S Systems is a company specializing in cable support systems for electrical, infrastructure, mining, rail and transport markets. The company offers products like cable ladders, trays, ducts and accessories that are manufactured to high quality standards. The directors have over 30 years of combined experience. The company is located in Sydney and can efficiently service the local area as well as other parts of New South Wales and Australian Capital Territory. They offer customized solutions and aim to deliver projects on time.
IWISS Catalog 2022
IWIss Catalog 2022 includes our newest terminal crimping tools, wire cutters&strippers, wire rope swaging tools, and plumbing tools.
Catalog 2021
The document describes IWISS electrical crimping tools, including ratchet crimpers, pneumatic crimpers, and crimping die sets. Some key details:
- IWISS offers crimping tools for virtually all types of electrical connections, including insulated and non-insulated terminals.
- Ratchet crimpers like the SN, HS, and AP series feature precise jaws, ergonomic grips, and self-adjusting dies for different wire sizes.
- Pneumatic crimpers like the AM-10 can crimp non-insulated terminals up to 16mm2, insulated terminals up to 6mm2, and cable end sleeves up to 35mm
TY523MX - THOMAS & BETTS - Cable Tie, Ty Rap® Self Lock, Nylon| AKBAR TRADING...
Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com. J3. J. Ty-Rap. ®/Ty-Fast. ®. T&B's Ty-Rap® Cable Ties
Thomas & Betts Key Products:
Ty-Rap Cable Ties
Ty-Met Cable Management Products
Cable Conduits
Cable Accessories
Ellis Patents Cable Cleats - Catalogue
This document provides information on cable cleats and jointing products from Ellis Patents. It begins with an overview of the Emperor range of stainless steel cable cleats that can withstand the highest levels of short circuit forces up to 235kA. Selection tables are provided for trefoil, single, and quad cable applications. The Vulcan+ range is also described, with capabilities up to 132kA. Information is then given on the Alpha range of aluminum trefoil cleats, as well as other cleat products like Vari-cleat, Atlas, and FlexiStrap. The document concludes with sections on jointing tools, hangers, and bespoke solutions.
STS Systems Product Catalogue V22
This document provides product catalogues and technical specifications for pre- and post-tensioning products from STS Systems. It describes STS's focus on quality, strength, and durability in their products since 1992. Their facilities and engineering expertise enable them to offer reliable products competitively. Product lines include Gripfast wedges, flat anchors and wedge blocks, square and round face anchors, circular anchorages, Gripfast barrels, and double-ended joiners. Specifications include dimensions, compatible components, material standards, and certifications.
Band-It - Stainless Steel Banding, Strapping, Clamping & Tools
BAND-IT stainless steel strapping and banding systems offer astonishing corrosion, pressure and temperature performance for industrial, offshore and subsea cable and pipe strapping, banding and securing.
BAND-IT band typical stainless steel strapping applications : down hole strapping, offshore oil platforms, under sea cable banding, pipe line strapping, water treatment, desalinization, chemical plants, underground cables or pipes, marine, furnace, high temperature strapping applications.
BAND-IT are world leaders in quality engineered stainless steel (grades 201, 304, 316), monel and inconel band clamping and cable tie fastening solutions BAND-IT service marine, offshore, subsea, petrochemical, oil and gas, rail, utilities, street lighting, power and construction industries - BAND-IT products include Adjustable Clamping Systems, Band & Buckle, Strapping & Banding Systems, Sign Brackets, Hose Fittings, Cable & Pipe Identification Systems, Preformed Clamping, Stainless Steel Cable Ties.
Expinno - Export Catalog
Wire Rod
Reinforcement Steel Bar
Construction Nail
Barbed Wire
Concertina Razor Wire
Cold Drawn Wire
Galvanized Wire Ropes
Black Annealed Wire
Wire Mesh
Hexagonal Wire Mesh
Steel Sheet
Steel in Coil
PVC Coated Wire Mesh
Panel Fence
Metal Profiles
Twisted Wire
Plastic Strip Nails
Concrete Nail
Ai rnet assembly_guide_2013_def_lo_res
This document provides installation instructions for AIRnet compressed air piping systems. It describes how to install different pipe diameters, including replacing older classic series pipes with new PF series pipes. Instructions are given for installing quick drops, pipe clips, valve supports and conductivity strips. Safety guidelines are also outlined, such as relieving pressure before installation and using the system within specified pressure and temperature ranges.
3M FPFT Catalog USA Rev D
The document is a product catalog from 3M for fall protection tools and equipment. It provides information on various attachment points, tool lanyards, and other accessories for securing tools when working at height. The attachments described include D-rings, quick-wrap tape, tool cinch attachments, quick spins, quick rings, and heat shrink. Load ratings and part numbers are provided for each product. The catalog also includes tool belts, pouches, spill control buckets, and wristbands. Videos and additional resources are referenced throughout for demonstrations and training on proper use of the fall protection tools.
Mayfran steel belt conveyors for metalworking
Mayfran produces hinged steelbelt conveyor systems for handling scrap metal and parts in industries like automotive and appliance manufacturing. The document discusses Mayfran's 40+ years of experience in designing reliable conveyors for applications worldwide. It also provides details on belt and frame designs that allow for durability and flexibility in conveying a variety of materials.
Catlog-Xinfa
Wuxi Xinfa Railway Equipment Co.,Ltd is a Chinese company that manufactures railway fasteners and related products. It has over 30 years of experience in the railway industry and serves customers worldwide. The company implements quality control systems and has a testing center to ensure products meet standards and customer requirements. It produces a variety of fasteners including railway spikes, bolts, clips, joints and plates for different rail systems.
Triangle Engineering
Triangle Engineering is an Omani company that manufactures and provides scaffolding services. It has the largest scaffolding factory in Oman with an automated production line and monthly capacity of 1200 tons. Triangle Engineering offers scaffolding sales, manufacturing, erection, dismantling services and products including standards, ledgers, transoms, frames, and fittings/couplers. Its vision is to provide quality Omani scaffolding products and services to industries such as oil/gas, construction, petrochemicals, and shipbuilding.
Commscope-Andrew 204673-1
This document provides information about purchasing a Commscope-Andrew 204673-1 4 Inch Aluminum Entry Panel including how to buy, specifications, warranty, shipping and the company Launch 3 Telecom that sells it. Launch 3 Telecom offers same day shipping for orders before 3PM and services including repairs, maintenance contracts, de-installation and recycling of telecom equipment.
5.catlog2016.5.17
Wuxi Xinfa Railway Equipment Co.,Ltd is a Chinese company that manufactures railway fasteners including railway clips, spikes, bolts, and other fastening parts. It has over 30 years of experience in the railway industry. The company has a quality inspection center and implements quality control processes to meet international standards like ISO 9001. It produces different types of clips, spikes, bolts and
5.catlog2016.5.17
Wuxi Xinfa Railway Equipment Co.,Ltd is a Chinese company that manufactures railway fasteners including railway clips, spikes, bolts, and other fastening parts. It has over 30 years of experience in the railway industry. The company has a quality inspection center and implements quality control processes to meet international standards like ISO 9001. It produces different types of clips, spikes, bolts and
5.catlog2016.5.17
Wuxi Xinfa Railway Equipment Co.,Ltd is a Chinese company that manufactures railway fasteners including railway clips, spikes, bolts, and other fastening parts. It has over 30 years of experience in the railway industry. The company has a quality inspection center and implements quality control processes to meet international standards like ISO 9001. It produces a variety of clips, spikes, bolts and
Brochure ENG (1)
The document provides information about wedge wire filter elements produced by Trislot. It discusses why wedge wire is preferable to other filter media due to its strength, lack of maintenance costs, and ability to prevent production stops. It then describes what wedge wire is and the manufacturing process. The document provides details on various wedge wire profiles and materials available. It also discusses different product types like slot tubes and welded screens. Testimonials are included that praise Trislot's quality, services, and partnership. In under 3 sentences, the document summarizes wedge wire filter elements manufactured by Trislot and why they provide advantages over other filter media.
Cable Socks - Pulling & Supporting Subsea & Offshore Cables & Umbilicals
Cable Socks - Pulling & Supporting Subsea & Offshore Cables & UmbilicalsThorne & Derrick International
This document provides information about cablegrips manufactured by Slingco, including:
- Slingco offers various types of cablegrips (MU, A, S, D, L, O types) for quick and efficient cable installation and support.
- The cablegrips are made from high tensile galvanized or stainless steel wire rope or aramid and are precisely hand-woven to ensure high quality and reliability.
- Specifications are provided for each cablegrip type, including lattice dimensions, lengths, and approximate breaking strengths for different cable diameter ranges.Cable Socks - Supporting & Pulling Cables & Umbilicals
This document provides information about cablegrips manufactured by Slingco, including:
- Slingco offers various types of cablegrips (MU, A, S, D, L, O types) for quick and efficient cable installation and support.
- The cablegrips are made from high tensile galvanized or stainless steel wire rope or aramid and are precisely hand-woven to ensure high quality and reliability.
- Specifications are provided for each cablegrip type, including lattice dimensions, lengths, and approximate breaking strengths for different cable diameter ranges.
Similar to TS-04A 150X20mm WPC outdoor decking (20)
TY523MX - THOMAS & BETTS - Cable Tie, Ty Rap® Self Lock, Nylon| AKBAR TRADING...
TY523MX - THOMAS & BETTS - Cable Tie, Ty Rap® Self Lock, Nylon| AKBAR TRADING...
Band-It - Stainless Steel Banding, Strapping, Clamping & Tools
Band-It - Stainless Steel Banding, Strapping, Clamping & Tools
Cable Socks - Pulling & Supporting Subsea & Offshore Cables & Umbilicals
Cable Socks - Pulling & Supporting Subsea & Offshore Cables & Umbilicals
Cable Socks - Supporting & Pulling Cables & Umbilicals
Cable Socks - Supporting & Pulling Cables & Umbilicals
Recently uploaded
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Mechatronics material . Mechanical engineering
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Gas agency management system project report.pdf
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
TS-04A 150X20mm WPC outdoor decking
- 2. Specification of TS-04ASpecification of TS-04A www.coowingroup.com TEL: +86-532-6773-1461 FAX: +86-532-6773-1463 Profile Ar cle No: TS-04A Width: 150mm Thickness: 20mm 20 150 www.coowingroup.com TEL: +86-532-6773-1461 FAX: +86-532-6773-1463 Thickness: 20mm
- 4. y Installation ＆ Instruction Summary Installation ＆ InstructionInstallation ＆ Instruction 2 3 1 4 Put two deck boards abreast； Put long bar tie plate upright under the boards, put one bar every 25-35cm(According to the plank which be selected) Then put one ixing stud, and between two board's channel； Last put one screw in the ixing stud, and then screw down fast. Making ixing stud and tie plate connection fast. Tools ＆ Accessories 11 2 3 4 The finished project pictures 250mm 250mm 8mm
- 6. Take It EasyTake It Easy Our Company For your convenience and peace of mind, we will do every step nuanced. General use cargo transporta on, container loading, packing maximum amount of product 7300 m. Our head office is located in Qingdao, Shandong, China. 16 years history,Coowin is the best manufacturer of WPC product. The successful construc on of high-quality team and service. COOWIN mainly specialize in outdoor construc on such as family terraces,balconies, swimming pools, parks plank. COOWIN products have been exported to the world more than 50 countries and regions. It means: Each 2.2 meters long, the en re container total of 3318 pieces, about 7300 meters, 1110㎡. And cargo will arrive safely in the shortest possible me. Plas c Film Carton Packaging Plywood Packaging Tarpaulins Packaging Fixed with Strapping www.coowingroup.com Tel: +86-532-6773 1461 Fax: +86-532-6773 1463 What is the concept about 7300 m ? Join us as the exclusive agent. Contect Us Packaging ＆ Shipping