(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
Training report on SOLIDWORKS.pptx
1. GOVERNMENT ENGINEERING
COLLEGE KONI, BILASPUR (C.G.)
DEPAERTMENT OF MECHANICAL ENGINEERING
A presentation on
Vocational Training in
SOLIDWORKS
From MSME TECHNOLOGY CENTRE DURG
Submitted By
Girendra Kumar
Mechanical (5th sem.)
300703720010
Submitted to
Prof. A.K. Tiwari
Assistant professor
3. About Training
From : MSME TECHNOLOGY CENTRE, DURG
Course name : SOLIDWORKS
Duration : One month
Course objective
i. Part modeling
ii. Assembly design
iii. Kinematics
iv. Drawing
4. About SOLIDWORKS
SolidWorks is a solid modeling computer-aided design (CAD) and
computer-aided engineering (CAE) application
SolidWorks Corporation was founded in December 1993 by
Massachusetts Institute of Technology graduate Jon Hirschtick.
SOLIDWORS is published by Dassault Systèmes .
According to the publisher, over two million engineers and designers at
more than 1.65 lacs companies were using SolidWorks as of 2013.
6. Sketch command
Line : Centreline,
Midpoint line
Circle Ellipse Parabola Arc
Rectangle :
Corner rectangle,
Center rectangle
Slot : Straight
slot, Center point
straight slot
Spline Point
7. Editing sketch
• Fillet creates a tangent are at the intersection of two sketch
elements, trimming away the corner.
Fillet
• Trim/Extend trims or extends a sketch element.
Trim/Extend
• Move entities is used for moving any objects or sketch.
Move
• Convert Entities creates one or more curves in a sketch by
projecting an edge, loop, face
Convert
• Mirror creates copies of sketch elements by are mirroring
them around a centrelines.
Mirror
• Offset Entities creates sketch curves offset from a selected
model edge, loop, face, external sketch curve
Offset
9. Features
Extrude: Extrude extends the sketched profile of a feature in one or two directions as either a thin feature
or a solid feature. An extrude operation can add material to a part.
Cut: A cut is a feature which removes material from a part or an assembly.
Fillet/Round: Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of
a face, selected sets of faces, selected edges, or edge loops.
Chamfer: Chamfer creates a bevelled edge on the selected edges and/or faces.
Revolved features: Revolved Boss/Base -material added by rotating the profiles about a centerline
Swept Boss/Base - material added by sweeping a profile along the path
Lofted: Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or
surface.
12. Assembly Design
• An assembly design consists of two or more
components assembled together at their respective
work positions using parametric relations.
• All components are created as separate part
documents, and then they are placed and
referenced in the assembly as external
components.
17. Benefits of SolidWorks
Maximize the productivity of your design and engineering resources to create products better
Faster and more cost-effective.
Built-in intelligence takes the guess work out of 3D design.
Easily manage product data, share designs, automate workflows.
Securely share design data across your organization, with clients, and with external partners.
19. Conclusion
SOLIDWORKS 3D CAD software is currently the most widely used software by
engineers and designers throughout the design development phase.
SOLIDWORKS 3D models are transforming ideas into reality with the ability to
simulate the concept design through different scenarios and adjust as needed in the
design development process.
It is now considered to be the best according to industry standards that can be obtained
for a wide array of designing.
Mechanical Engineering Services and other industrial purposes. This software is
utilized to provide some useful and practical designing software that will allow users to
visualize as well as create prototypes of a product in realty and quick time .