Govt. Corona Hospital | Team Illinois | BuiltTech 4.0
•
0 likes•82 views
This document proposes building the first modular construction hospital in Bangladesh using steel containers to rapidly respond to a viral outbreak. The design calls for installing identical modular steel containers outfitted with windows, doors, and medical equipment to form wards. The proposed location is in Keraniganj due its proximity and access to Dhaka without being too close to residential areas. An estimated timeline of under 3 weeks and budget of 140.8 crore BDT are provided. Steel containers are advocated for because they allow fast, reusable, and recyclable construction.
Report
Share
Report
Share
Download to read offline
Recommended
Icumi 2012 sultan
Electrostatic cooling is a potential environmentally friendly alternative to cutting fluids in machining processes. It works by ionizing an airflow or fine droplets of lubricant through electrostatic charging. Studies have shown it can improve tool life, reduce cutting forces, and improve surface finish and geometry accuracy compared to dry or conventional wet machining. While promising, more research is still needed on its potentials and applications for different materials and processes. In summary, electrostatic cooling is a green machining technique that shows improvements over traditional cooling methods.
CV-Yongchen Zhao
This document provides a summary of Yongchen Zhao's qualifications, education, work experience, projects, skills, publications, and hobbies. Yongchen Zhao has over two years of experience leading projects in process simulation and control. He received a Master's degree in Chemical Engineering from Tsinghua University and has extensive experience using AspenPlus and AspenDynamics to model plants and develop strategies to reduce emissions. His projects have focused on startup scenarios to lower flare emissions at petrochemical facilities.
Intelligent building ppt
This document summarizes a student project presentation on intelligent buildings. It includes sections on the introduction, need for intelligent buildings, differences from ordinary buildings, cost effective construction, energy efficient components, environmental friendliness, features like access control and safety systems, management systems, advantages like air quality and security, disadvantages like high initial costs, and a conclusion on intelligent buildings being the future.
Industrialised Building System report,
This report summarizes an educational trip by Eraz Aqilah Binti Tajul Edrus to the CIDB Convention Centre to learn about Industrialized Building Systems (IBS). The trip included a presentation on IBS, visiting the IBS Component Gallery to see examples of IBS components like formwork systems, blockwork systems, and steel frame systems. They also toured the IBS Show House and labs at the Construction Research Institute of Malaysia (CREAM) which tests IBS components. The report discusses the purposes, advantages, manufacturing process, and types of IBS classified by structure, material, and relative component weight. It provides details on the testing equipment and applications at CREAM labs.
BGCAPP Year in Review Dec. 11, 2012
BGCAPP Year in Review Dec. 11, 2012Program Executive Office, Assembled Chemical Weapons Alternatives (PEO ACWA)
Presented to:
Kentucky Chemical Demilitarization Citizens’ Advisory Commission/ Chemical Destruction Community Advisory Board Meeting
Presented by:
Jeff Brubaker Tom McKinney
Site Project Manager Project Manager
Contour Crafting for Home Construction
These slides use concepts from my (Jeff Funk) course entitled Biz Models for Hi-Tech Products to analyze the business model for Contour Crafting in Home Construction.
Contour crafting involves large-scale 3D printing of concrete homes. A machine is constructed for a specific design and the machine rapidly dispenses concrete for the home thus resulting in rapid construction of the concrete home. This technique is largely based on patents held by Behrokh Khoshenevis, a professor at the University of Southern California. These slides describe the specific value proposition for construction companies and home buyers and other aspects of the business model such as the method of value capture, scope of activities, and method of strategic control.
Axis eng contact and brochure 2013
Axis Engineering, LLC provides consulting engineering services for dry material handling systems, dust collection systems, pneumatic conveying systems, and packaging systems. Services include design, specification, evaluation, optimization, cost justification, and technical training. David Renfert is the principal engineer and has experience across various industries including food, pharmaceutical, manufacturing, and minerals processing. Example projects include ventilation and exhaust systems for drying lines, pneumatic conveying and dust collection for material handling, and storage and packaging systems for a food production facility.
Court 2009 transforming traditional m&e construction into a modern process of...
Peter is the MEP Director of Delivery at CHUM Montreal for Construction Sante Montreal, a joint venture between OHL and Laing O’Rourke. Prior to this he was responsible for the mechanical scope of the Northern Water Treatment Plant, in Queensland, for LOR Australia. Peter holds an MBA from Aston University, Birmingham and Engineering Doctorate from Loughborough University, UK. Previously he was project leader for the MEP element (£100m) of a large healthcare development in Stoke on Trent, UK. It was on this project that he developed, in conjunction with his EngDoc research, a lean and agile construction system, the objective of which was to improve workers health, safety and productivity, thereby improving the performance of the project. The outcome of the research project is contained in his thesis – ‘Transforming Traditional Mechanical and Electrical Construction into a Modern Process of Assembly.’
Recommended
Icumi 2012 sultan
Electrostatic cooling is a potential environmentally friendly alternative to cutting fluids in machining processes. It works by ionizing an airflow or fine droplets of lubricant through electrostatic charging. Studies have shown it can improve tool life, reduce cutting forces, and improve surface finish and geometry accuracy compared to dry or conventional wet machining. While promising, more research is still needed on its potentials and applications for different materials and processes. In summary, electrostatic cooling is a green machining technique that shows improvements over traditional cooling methods.
CV-Yongchen Zhao
This document provides a summary of Yongchen Zhao's qualifications, education, work experience, projects, skills, publications, and hobbies. Yongchen Zhao has over two years of experience leading projects in process simulation and control. He received a Master's degree in Chemical Engineering from Tsinghua University and has extensive experience using AspenPlus and AspenDynamics to model plants and develop strategies to reduce emissions. His projects have focused on startup scenarios to lower flare emissions at petrochemical facilities.
Intelligent building ppt
This document summarizes a student project presentation on intelligent buildings. It includes sections on the introduction, need for intelligent buildings, differences from ordinary buildings, cost effective construction, energy efficient components, environmental friendliness, features like access control and safety systems, management systems, advantages like air quality and security, disadvantages like high initial costs, and a conclusion on intelligent buildings being the future.
Industrialised Building System report,
This report summarizes an educational trip by Eraz Aqilah Binti Tajul Edrus to the CIDB Convention Centre to learn about Industrialized Building Systems (IBS). The trip included a presentation on IBS, visiting the IBS Component Gallery to see examples of IBS components like formwork systems, blockwork systems, and steel frame systems. They also toured the IBS Show House and labs at the Construction Research Institute of Malaysia (CREAM) which tests IBS components. The report discusses the purposes, advantages, manufacturing process, and types of IBS classified by structure, material, and relative component weight. It provides details on the testing equipment and applications at CREAM labs.
BGCAPP Year in Review Dec. 11, 2012
BGCAPP Year in Review Dec. 11, 2012Program Executive Office, Assembled Chemical Weapons Alternatives (PEO ACWA)
Presented to:
Kentucky Chemical Demilitarization Citizens’ Advisory Commission/ Chemical Destruction Community Advisory Board Meeting
Presented by:
Jeff Brubaker Tom McKinney
Site Project Manager Project Manager
Contour Crafting for Home Construction
These slides use concepts from my (Jeff Funk) course entitled Biz Models for Hi-Tech Products to analyze the business model for Contour Crafting in Home Construction.
Contour crafting involves large-scale 3D printing of concrete homes. A machine is constructed for a specific design and the machine rapidly dispenses concrete for the home thus resulting in rapid construction of the concrete home. This technique is largely based on patents held by Behrokh Khoshenevis, a professor at the University of Southern California. These slides describe the specific value proposition for construction companies and home buyers and other aspects of the business model such as the method of value capture, scope of activities, and method of strategic control.
Axis eng contact and brochure 2013
Axis Engineering, LLC provides consulting engineering services for dry material handling systems, dust collection systems, pneumatic conveying systems, and packaging systems. Services include design, specification, evaluation, optimization, cost justification, and technical training. David Renfert is the principal engineer and has experience across various industries including food, pharmaceutical, manufacturing, and minerals processing. Example projects include ventilation and exhaust systems for drying lines, pneumatic conveying and dust collection for material handling, and storage and packaging systems for a food production facility.
Court 2009 transforming traditional m&e construction into a modern process of...
Peter is the MEP Director of Delivery at CHUM Montreal for Construction Sante Montreal, a joint venture between OHL and Laing O’Rourke. Prior to this he was responsible for the mechanical scope of the Northern Water Treatment Plant, in Queensland, for LOR Australia. Peter holds an MBA from Aston University, Birmingham and Engineering Doctorate from Loughborough University, UK. Previously he was project leader for the MEP element (£100m) of a large healthcare development in Stoke on Trent, UK. It was on this project that he developed, in conjunction with his EngDoc research, a lean and agile construction system, the objective of which was to improve workers health, safety and productivity, thereby improving the performance of the project. The outcome of the research project is contained in his thesis – ‘Transforming Traditional Mechanical and Electrical Construction into a Modern Process of Assembly.’
KBE Laboratories 2011
KBE Building is a 52-year-old construction firm with over $2.3 billion in construction volume over the past decade. They have expertise in design-build, CM at risk, CM as advisor, and general contracting. They have completed various higher education, research, and manufacturing projects throughout New England and the Mid-Atlantic region.
Madison Modular Healthcare Solutions
Madison Industries is a large provider of pre-engineered structures that began as a sheet metal shop in 1947. It now has three manufacturing plants across the US and provides modular buildings for healthcare facilities. A case study describes a labor and delivery ward Madison built for Lake Havasu Regional Hospital in 120 days, which included private patient rooms, a nursery, and other medical spaces. Modular construction allows for faster completion while meeting building codes.
raju pp work.pptx
The document provides information about Hierarchy Makers, a UK-based construction company. It discusses the company's vision, team members, past projects including Maggie's Cancer Caring Centre and Greenhill Primarycare Centre, milestones, policies, and an introduction to site management practices. The document emphasizes the importance of health and safety plans in the construction industry and outlines Hierarchy Makers' objectives to ensure worker safety and compliance with relevant regulations.
Safety by design
This document discusses safety by design (SbD), which is the process of considering construction site safety and health during the design of construction projects. It notes that nearly 200,000 serious injuries and 1,000 deaths occur annually in US construction. SbD can help reduce accidents by addressing safety issues early in design. Barriers to SbD include fears of liability for designers and lack of safety expertise. However, tools like safety checklists and initiatives in various countries are helping promote SbD. Full implementation requires establishing a safety culture, enabling processes, and clients who value lifecycle safety.
The Green Buiding Debate
The document discusses green building and sustainable MEP (mechanical, electrical, and plumbing) systems. It provides information on defining green building, the impacts of the built environment, green building certification systems, making MEP systems more sustainable, and 10 commandments for sustainable MEP design. The key topics covered include the environmental and economic benefits of green buildings, common green building rating systems, strategies for reducing the costs and environmental impacts of MEP systems through integrated design and high-performance equipment and controls.
PPM BIM summer school presentation vasudeva
The document discusses strategies to reduce costs and time in rail track projects by 50% through case studies of the Crossrail project in London and a highways project in Worcester, UK. Key strategies discussed include using repetitive production tasks through prefabricated rail tracks and off-site construction. Planning tools like Lean, Last Planner, six sigma and Deming's PDCA were used. Challenges in the Crossrail project included varying ground conditions and managing interfaces. Lessons from the projects emphasized design accountability, interface management and stakeholder engagement. The document also discusses future technological developments like maglev trains, aero trains and tubular rail systems that could further reduce costs and time in rail construction.
Innovation in construction industry
The assignment is done by students of BMSSA on the Topic Innovation in Construction Industry as an assignment for MMBC in Architecture
Cdms ccs master as at 131017
CDMS Consulting Engineers provides structural, mechanical, piping, and civil engineering design services globally. They have over 29 years of experience working on projects in industries such as oil and gas, mining, power generation, chemicals, and water. Their services include pressure equipment design and verification, bulk materials handling design, maintenance support, and special design projects.
CD 2016 March - Advisian Showcase
Daniel Cahalarn implemented a completions driven approach on the Hebron oil field project in Korea that resulted in significant benefits. By utilizing progressive inspections with a mobile 3D model, they were able to validate cable tray installation 25% faster. This improved schedule certainty and identified opportunities to pull more cable per week. Visualizing the status in 3D also found early loop testing opportunities. Overall, the approach improved safety, quality, and construction performance through focused planning, inspections, and influencing contractor behavior with accurate information.
Diethyl Ether (DEE): Site Selection and Plant Layout
Factors affecting site selection & plant layout for production of Diethyl ether. Suggestion of Plant site for production in India.
Steel building Graded Unit Civil Engineering Project HND Project Glasgow Kel...
This was my second Graded unit Project, it involved construction of Steel framed Office building, based on HND modules we were advised to devise solution of Steel building which two areas of specialisation in which I chose Sustainability and Frame Structure. This assignment does not have drawings and calculations unfortunately i have lost them, however their is a copy at Former Stow College now Glasgow Kelvin college so students can access from there. For any structural help, I would strongly advise to meet Mr Murdo a very competent lecturer in Kelvin college.
Although its rough guide, we were not heavily using journals at that stage, as we relied mostly on our course material. However some of the Green material which i used was taken from companies publications.
Modern Construction Technologies
Modern construction technology (MCT) is a collective term used to describe a number of construction methods. These methods differ from so-called conventional construction methods such as brick and block.
Leed Goals Meeting Minutes 02.04.09
This document outlines discussions from a meeting regarding plans to replicate the Community Renewal International (CRI) model in other cities. It summarizes perspectives from various organizations involved in the project, including MHSM Architects, Purtle & Associates, USGBC-LA, AFJMc, and CRI. Key topics discussed include promoting green technologies, workforce development, partnerships, and setting an example for sustainable building. The document also lists potential focus areas and innovative ideas for the project's site design, energy and water efficiency, materials selection, and indoor environment quality.
2017-prefabricatedsystem-03sept-171121130839.pdf
Prefabricated construction systems can help address India's shortage of affordable housing. Prefabrication allows for faster construction at lower cost while ensuring quality. It can save resources and reduce waste compared to conventional construction. Various prefabricated technologies used worldwide include precast concrete panels, light gauge steel framing, and sandwich panels. India is promoting prefabrication under programs like Pradhan Mantri Awas Yojna but needs more widespread adoption, standardized guidelines, and trained workers to fully realize the benefits of prefabricated housing.
Prefabricated construction systems in India- Precast Status and needed Impetus
Presentation on Prefabricated construction systems in India- Precast Status and needed Impetus by Prof S. K. Singh,Sr. Principal Scientist & Professor, AcSIR, CSIR-Central Building Research Institute, Roorkee at #33NCCE 33rd National Convention of Civil Engineers at #IEIGSC
Cellular Lightweight Concrete Blocks, CLC Blocks Manufacturing Plant, Foamed ...
Cellular Lightweight Concrete Blocks, CLC Blocks Manufacturing Plant, Foamed Concrete Blocks, Foam Crete Blocks, Foam Concrete Blocks, Detailed Project Report on CLC Blocks with Steam Curing Method, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis
CLC blocks are pretty popular in market leading builders and architects. All firms that have well learned and technically updated team of planning engineers and execution engineers are using the modern blocks wherever possible. The long term benefit of using CLC blocks one obtains is by virtue of its being very good thermal insulator.
See more
https://goo.gl/GVZ2X3
https://goo.gl/bfgggU
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Near Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Fax: +91-11-23841561
Website: http://www.niir.org , http://www.entrepreneurindia.co
TAGS
Cellular light weight manual block production, Cellular Lightweight Concrete Block Plant, Cellular lightweight concrete Blocks project report in India, Cellular lightweight concrete blocks machine, Cellular lightweight concrete Blocks, Cellular Lightweight Concrete Foam Concrete Technologies, Cellular lightweight concrete manufacturing process, Cellular lightweight concrete project report, Cellular Lightweight Concrete Using Fly Ash, CLC Based Small Scale Industries Projects, CLC blocks automatic plant project report, CLC Blocks CLC Plant ,CLC blocks Industrial Project Reports, CLC blocks machinery cost, CLC blocks making machine factory, CLC blocks Making Small Business Manufacturing, CLC blocks manufacturing Business, CLC blocks manufacturing Industry in India, CLC blocks manufacturing plant, CLC blocks manufacturing process, Project profile on CLC blocks manufacturing, Project Report for CLC Blocks, Project report of lightweight foam concrete blocks, Project report on CLC blocks Plant, Project report on CLC blocks manufacturing industries, Project Report on CLC blocks Production, Project report on lightweight concrete pdf, Setting up and opening your CLC blocks production plant, Should I manufacture CLC blocks?, Small Scale CLC blocks manufacturing Projects, Small scale CLC blocks production line, Small scale Commercial CLC blocks making,Start up Business Plan for Cellular Lightweight Concrete blocks project, Start Up India, Stand Up India, Starting a CLC blocks manufacturing Business, Startup, startup ideas, Startup Project, Startup Project for Cellular Lightweight Concrete blocks plant, startup project plan
Portfolio
William R Richards II provides a career portfolio summarizing his accomplishments in various engineering roles. He began as a lecturer developing courses on LinkedIn and the Space Shuttle program. He then worked as a project engineer for Jacobs and KBR managing capital projects. Next, he served as a Six Sigma consultant for DuPont and Chemours improving processes. Most recently, he was the Lead Systems Engineer for United Space Alliance overseeing the External Tank engineering group and projects like recovery from hail damage to the Space Shuttle. Recommendations and references are provided.
Daylight and Wind Studies for Successful Planning Applications in Ireland
The webinar covered the current planning requirements for Daylight, Sunlight and Pedestrian Comfort Studies in the Republic of Ireland. We also examined the new daylight standard IS EN 17037:2018 and how it compares to the now withdrawn BS 8206-2:2008 standard.
light weight concrete.pdf
Cellular lightweight concrete blocks, also known as foam concrete blocks, are a lightweight, fireproof and environmentally friendly building material. This document provides an overview of the production and advantages of cellular lightweight concrete (CLC) blocks. It discusses the manufacturing process, required machinery, raw materials, and applications of CLC blocks. The project report would analyze market demand, costs, profits, and other factors to determine the feasibility and financials of establishing a CLC block manufacturing plant.
MAN presentation
This document discusses a project to implement condition-based maintenance on ships using vibration monitoring. Key points:
- The project aims to move maintenance from breakdown-based to condition-based using sensors to continuously monitor vibrations in equipment like engines and turbines.
- This is expected to eliminate damages from breakdowns, minimize downtime, and allow more efficient planned maintenance compared to acute/unplanned maintenance currently.
- Partners involved include the shipping company, DTU, and equipment vendors. The system will filter vibration data, integrate with existing maintenance systems, and establish an onboard and shoreside database for analysis.
- Financial benefits are estimated at $1 million per year for a fleet of 100 ships by reducing breakdown
Store Closure of Decathlon Sports Bangladesh - A Case Study
Hello! Today, I'd like to discuss a recent case study that has drawn attention from the retail industry: Decathlon Sports Bangladesh's store closure on August 1st. This decision has prompted discussions about the poor relationship between supply chain dynamics and retail strategies. Let's take a closer look at the situation and explore some possible solutions that could make a big difference. So, here are 3 potential issues and big ideas from the case study.
Article Link: https://www.linkedin.com/pulse/store-closure-decathlon-sports-bangladesh-case-study-mobin
Industrial Attachment Report on DBL Group.pdf
In this report, I share my experiences and learnings from my 1-month industrial attachment at DBL Group. Throughout my attachment, I had the opportunity to work alongside professionals in Jinnat Complex, gaining valuable insights and hands-on experience in Knit Fabric Manufacturing.
In this report, I provide an overview of my attachment experience, including the projects I worked on, the challenges I faced, and the skills I developed during my time at DBL Group. I also reflect on the lessons I learned and the ways in which this attachment has helped shape my future career goals.
Whether you're a student interested in pursuing an industrial attachment or a professional looking to gain insights into the Textile field, this report offers a firsthand account of the opportunities and challenges of working in this dynamic and exciting industry.
So, whether you're an aspiring Textile professional or simply curious about the field, I invite you to take a look at my intern report and join me on this journey of discovery and growth.
#DBL #Textile #Intern #KUET
More Related Content
Similar to Govt. Corona Hospital | Team Illinois | BuiltTech 4.0
KBE Laboratories 2011
KBE Building is a 52-year-old construction firm with over $2.3 billion in construction volume over the past decade. They have expertise in design-build, CM at risk, CM as advisor, and general contracting. They have completed various higher education, research, and manufacturing projects throughout New England and the Mid-Atlantic region.
Madison Modular Healthcare Solutions
Madison Industries is a large provider of pre-engineered structures that began as a sheet metal shop in 1947. It now has three manufacturing plants across the US and provides modular buildings for healthcare facilities. A case study describes a labor and delivery ward Madison built for Lake Havasu Regional Hospital in 120 days, which included private patient rooms, a nursery, and other medical spaces. Modular construction allows for faster completion while meeting building codes.
raju pp work.pptx
The document provides information about Hierarchy Makers, a UK-based construction company. It discusses the company's vision, team members, past projects including Maggie's Cancer Caring Centre and Greenhill Primarycare Centre, milestones, policies, and an introduction to site management practices. The document emphasizes the importance of health and safety plans in the construction industry and outlines Hierarchy Makers' objectives to ensure worker safety and compliance with relevant regulations.
Safety by design
This document discusses safety by design (SbD), which is the process of considering construction site safety and health during the design of construction projects. It notes that nearly 200,000 serious injuries and 1,000 deaths occur annually in US construction. SbD can help reduce accidents by addressing safety issues early in design. Barriers to SbD include fears of liability for designers and lack of safety expertise. However, tools like safety checklists and initiatives in various countries are helping promote SbD. Full implementation requires establishing a safety culture, enabling processes, and clients who value lifecycle safety.
The Green Buiding Debate
The document discusses green building and sustainable MEP (mechanical, electrical, and plumbing) systems. It provides information on defining green building, the impacts of the built environment, green building certification systems, making MEP systems more sustainable, and 10 commandments for sustainable MEP design. The key topics covered include the environmental and economic benefits of green buildings, common green building rating systems, strategies for reducing the costs and environmental impacts of MEP systems through integrated design and high-performance equipment and controls.
PPM BIM summer school presentation vasudeva
The document discusses strategies to reduce costs and time in rail track projects by 50% through case studies of the Crossrail project in London and a highways project in Worcester, UK. Key strategies discussed include using repetitive production tasks through prefabricated rail tracks and off-site construction. Planning tools like Lean, Last Planner, six sigma and Deming's PDCA were used. Challenges in the Crossrail project included varying ground conditions and managing interfaces. Lessons from the projects emphasized design accountability, interface management and stakeholder engagement. The document also discusses future technological developments like maglev trains, aero trains and tubular rail systems that could further reduce costs and time in rail construction.
Innovation in construction industry
The assignment is done by students of BMSSA on the Topic Innovation in Construction Industry as an assignment for MMBC in Architecture
Cdms ccs master as at 131017
CDMS Consulting Engineers provides structural, mechanical, piping, and civil engineering design services globally. They have over 29 years of experience working on projects in industries such as oil and gas, mining, power generation, chemicals, and water. Their services include pressure equipment design and verification, bulk materials handling design, maintenance support, and special design projects.
CD 2016 March - Advisian Showcase
Daniel Cahalarn implemented a completions driven approach on the Hebron oil field project in Korea that resulted in significant benefits. By utilizing progressive inspections with a mobile 3D model, they were able to validate cable tray installation 25% faster. This improved schedule certainty and identified opportunities to pull more cable per week. Visualizing the status in 3D also found early loop testing opportunities. Overall, the approach improved safety, quality, and construction performance through focused planning, inspections, and influencing contractor behavior with accurate information.
Diethyl Ether (DEE): Site Selection and Plant Layout
Factors affecting site selection & plant layout for production of Diethyl ether. Suggestion of Plant site for production in India.
Steel building Graded Unit Civil Engineering Project HND Project Glasgow Kel...
This was my second Graded unit Project, it involved construction of Steel framed Office building, based on HND modules we were advised to devise solution of Steel building which two areas of specialisation in which I chose Sustainability and Frame Structure. This assignment does not have drawings and calculations unfortunately i have lost them, however their is a copy at Former Stow College now Glasgow Kelvin college so students can access from there. For any structural help, I would strongly advise to meet Mr Murdo a very competent lecturer in Kelvin college.
Although its rough guide, we were not heavily using journals at that stage, as we relied mostly on our course material. However some of the Green material which i used was taken from companies publications.
Modern Construction Technologies
Modern construction technology (MCT) is a collective term used to describe a number of construction methods. These methods differ from so-called conventional construction methods such as brick and block.
Leed Goals Meeting Minutes 02.04.09
This document outlines discussions from a meeting regarding plans to replicate the Community Renewal International (CRI) model in other cities. It summarizes perspectives from various organizations involved in the project, including MHSM Architects, Purtle & Associates, USGBC-LA, AFJMc, and CRI. Key topics discussed include promoting green technologies, workforce development, partnerships, and setting an example for sustainable building. The document also lists potential focus areas and innovative ideas for the project's site design, energy and water efficiency, materials selection, and indoor environment quality.
2017-prefabricatedsystem-03sept-171121130839.pdf
Prefabricated construction systems can help address India's shortage of affordable housing. Prefabrication allows for faster construction at lower cost while ensuring quality. It can save resources and reduce waste compared to conventional construction. Various prefabricated technologies used worldwide include precast concrete panels, light gauge steel framing, and sandwich panels. India is promoting prefabrication under programs like Pradhan Mantri Awas Yojna but needs more widespread adoption, standardized guidelines, and trained workers to fully realize the benefits of prefabricated housing.
Prefabricated construction systems in India- Precast Status and needed Impetus
Presentation on Prefabricated construction systems in India- Precast Status and needed Impetus by Prof S. K. Singh,Sr. Principal Scientist & Professor, AcSIR, CSIR-Central Building Research Institute, Roorkee at #33NCCE 33rd National Convention of Civil Engineers at #IEIGSC
Cellular Lightweight Concrete Blocks, CLC Blocks Manufacturing Plant, Foamed ...
Cellular Lightweight Concrete Blocks, CLC Blocks Manufacturing Plant, Foamed Concrete Blocks, Foam Crete Blocks, Foam Concrete Blocks, Detailed Project Report on CLC Blocks with Steam Curing Method, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis
CLC blocks are pretty popular in market leading builders and architects. All firms that have well learned and technically updated team of planning engineers and execution engineers are using the modern blocks wherever possible. The long term benefit of using CLC blocks one obtains is by virtue of its being very good thermal insulator.
See more
https://goo.gl/GVZ2X3
https://goo.gl/bfgggU
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Near Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Fax: +91-11-23841561
Website: http://www.niir.org , http://www.entrepreneurindia.co
TAGS
Cellular light weight manual block production, Cellular Lightweight Concrete Block Plant, Cellular lightweight concrete Blocks project report in India, Cellular lightweight concrete blocks machine, Cellular lightweight concrete Blocks, Cellular Lightweight Concrete Foam Concrete Technologies, Cellular lightweight concrete manufacturing process, Cellular lightweight concrete project report, Cellular Lightweight Concrete Using Fly Ash, CLC Based Small Scale Industries Projects, CLC blocks automatic plant project report, CLC Blocks CLC Plant ,CLC blocks Industrial Project Reports, CLC blocks machinery cost, CLC blocks making machine factory, CLC blocks Making Small Business Manufacturing, CLC blocks manufacturing Business, CLC blocks manufacturing Industry in India, CLC blocks manufacturing plant, CLC blocks manufacturing process, Project profile on CLC blocks manufacturing, Project Report for CLC Blocks, Project report of lightweight foam concrete blocks, Project report on CLC blocks Plant, Project report on CLC blocks manufacturing industries, Project Report on CLC blocks Production, Project report on lightweight concrete pdf, Setting up and opening your CLC blocks production plant, Should I manufacture CLC blocks?, Small Scale CLC blocks manufacturing Projects, Small scale CLC blocks production line, Small scale Commercial CLC blocks making,Start up Business Plan for Cellular Lightweight Concrete blocks project, Start Up India, Stand Up India, Starting a CLC blocks manufacturing Business, Startup, startup ideas, Startup Project, Startup Project for Cellular Lightweight Concrete blocks plant, startup project plan
Portfolio
William R Richards II provides a career portfolio summarizing his accomplishments in various engineering roles. He began as a lecturer developing courses on LinkedIn and the Space Shuttle program. He then worked as a project engineer for Jacobs and KBR managing capital projects. Next, he served as a Six Sigma consultant for DuPont and Chemours improving processes. Most recently, he was the Lead Systems Engineer for United Space Alliance overseeing the External Tank engineering group and projects like recovery from hail damage to the Space Shuttle. Recommendations and references are provided.
Daylight and Wind Studies for Successful Planning Applications in Ireland
The webinar covered the current planning requirements for Daylight, Sunlight and Pedestrian Comfort Studies in the Republic of Ireland. We also examined the new daylight standard IS EN 17037:2018 and how it compares to the now withdrawn BS 8206-2:2008 standard.
light weight concrete.pdf
Cellular lightweight concrete blocks, also known as foam concrete blocks, are a lightweight, fireproof and environmentally friendly building material. This document provides an overview of the production and advantages of cellular lightweight concrete (CLC) blocks. It discusses the manufacturing process, required machinery, raw materials, and applications of CLC blocks. The project report would analyze market demand, costs, profits, and other factors to determine the feasibility and financials of establishing a CLC block manufacturing plant.
MAN presentation
This document discusses a project to implement condition-based maintenance on ships using vibration monitoring. Key points:
- The project aims to move maintenance from breakdown-based to condition-based using sensors to continuously monitor vibrations in equipment like engines and turbines.
- This is expected to eliminate damages from breakdowns, minimize downtime, and allow more efficient planned maintenance compared to acute/unplanned maintenance currently.
- Partners involved include the shipping company, DTU, and equipment vendors. The system will filter vibration data, integrate with existing maintenance systems, and establish an onboard and shoreside database for analysis.
- Financial benefits are estimated at $1 million per year for a fleet of 100 ships by reducing breakdown
Similar to Govt. Corona Hospital | Team Illinois | BuiltTech 4.0 (20)
Diethyl Ether (DEE): Site Selection and Plant Layout
Diethyl Ether (DEE): Site Selection and Plant Layout
Steel building Graded Unit Civil Engineering Project HND Project Glasgow Kel...
Steel building Graded Unit Civil Engineering Project HND Project Glasgow Kel...
Prefabricated construction systems in India- Precast Status and needed Impetus
Prefabricated construction systems in India- Precast Status and needed Impetus
Cellular Lightweight Concrete Blocks, CLC Blocks Manufacturing Plant, Foamed ...
Cellular Lightweight Concrete Blocks, CLC Blocks Manufacturing Plant, Foamed ...
Daylight and Wind Studies for Successful Planning Applications in Ireland
Daylight and Wind Studies for Successful Planning Applications in Ireland
More from Mobin Mithun
Store Closure of Decathlon Sports Bangladesh - A Case Study
Hello! Today, I'd like to discuss a recent case study that has drawn attention from the retail industry: Decathlon Sports Bangladesh's store closure on August 1st. This decision has prompted discussions about the poor relationship between supply chain dynamics and retail strategies. Let's take a closer look at the situation and explore some possible solutions that could make a big difference. So, here are 3 potential issues and big ideas from the case study.
Article Link: https://www.linkedin.com/pulse/store-closure-decathlon-sports-bangladesh-case-study-mobin
Industrial Attachment Report on DBL Group.pdf
In this report, I share my experiences and learnings from my 1-month industrial attachment at DBL Group. Throughout my attachment, I had the opportunity to work alongside professionals in Jinnat Complex, gaining valuable insights and hands-on experience in Knit Fabric Manufacturing.
In this report, I provide an overview of my attachment experience, including the projects I worked on, the challenges I faced, and the skills I developed during my time at DBL Group. I also reflect on the lessons I learned and the ways in which this attachment has helped shape my future career goals.
Whether you're a student interested in pursuing an industrial attachment or a professional looking to gain insights into the Textile field, this report offers a firsthand account of the opportunities and challenges of working in this dynamic and exciting industry.
So, whether you're an aspiring Textile professional or simply curious about the field, I invite you to take a look at my intern report and join me on this journey of discovery and growth.
#DBL #Textile #Intern #KUET
Presentation Booster Dose | KTC_Day2
This document provides tips and tricks for enhancing PowerPoint presentations through various hacks related to fonts, backgrounds, graphics, effects and more. It includes hacks for font styling, adding transparent backgrounds, using GIFs and vectors, incorporating green screen motion graphics, enabling morphing effects, modifying export resolution settings, optimizing for SlideShare and Prezi, and improving slide changing transitions. The document aims to share different hacks that can improve and customize PowerPoint presentations.
Presentation Booster Dose | KTC_Day1
I conducted two days masterclass regarding PowerPoint presentation at KUET Textile Club.
Here, I tried to instruct basic skills that can help anyone to decorate good presentation slides.
Event Promo: https://youtu.be/tCS1d3Acmhc
Hollow Fiber
This document discusses hollow fiber membranes and their use in ultrafiltration. It begins with an overview of hollow fiber fundamentals, including their dimensions and construction from materials like cellulose acetate. It then covers hollow fiber module design features, membrane classification, fiber formation processes, module regeneration techniques like air scouring, benefits like high surface area to volume ratio, and applications in water treatment, dialysis and more. Resources for further reading are provided at the end.
Fiber Film
This document presents information on fiber film, a unique reinforced stretch film made from low linear density polyethylene. Fiber film combines high elongation with exceptional puncture resistance and pallet stability. It is produced using a process that transforms polyethylene into reinforcement fibers to greatly increase tear resistance and durability. Fiber film provides benefits over conventional stretch film like reduced costs, superior pallet stability, waste reduction, and being 100% recyclable.
InstaRent | Team Snap Out Of It | BOM 2022
1) InstaRent aims to provide affordable access to electronics like laptops and smartphones through a subscription model, allowing users to pay monthly fees rather than the full upfront cost of devices.
2) The company will source both new and refurbished devices, track them using blockchain technology, and adjust subscription prices over time based on the device's usage and condition.
3) By extending the lifespan of devices, InstaRent hopes to build a circular economy that provides socioeconomic benefits while maintaining profitability through recurring subscription revenues over multiple users of each product.
Bleaching Process of Cotton Goods in Winch Machine
Academic Presentation | Shitty 3rd Year (2020-2022)
We got the opportunity to pitch a slide presentation after the longggg... pandemic. But omicron is knocking at our doors :3
Acing The Interview | Team Blue Archers | GP Explorers 2.0
This was our presentation slide on the given topic that we had to learn from our 'Interview' modules in the 'Effective Communication' unit. Had an amazing journey with some of the bright youngsters from reputed institutions!!
Pitch Date: May 26, 2021
Team Members:
Md. Sohel Rana _DU
Shishir Kairy _KUET
Md. Ahsanul Mobin _KUET
Tahya Ahammed Bisma _IUT
Tasneem Islam Promi _IUT
Reshma Haque _AUW
Agrowz | Team In Dire Straits | MELBU
The document discusses the services provided by AGROWZ, an agricultural app platform in Bangladesh. It offers several features to help farmers, including manuals and timelines for growing crops and raising livestock, a marketplace for buying and selling farming equipment and produce, hiring local farm labor, arranging transportation of goods, connecting farmers to agricultural experts for advice, educational videos and tutorials, and a FAQ section. The platform aims to make farming easier by providing these services in a single digital app.
Creative Branding Ideas and Timeline (HULT Prize at KUET 2020-21)
This was the slide of the proposed branding ideas and timeline to host a successful on-campus round of the HULT Prize. Have a sneak peek!!
Facebook Event Link: https://www.facebook.com/hultprizeatkuet
Club Partner: KUET Business and Entrepreneurship Club
Yarn Twist
This document presents information about yarn twist. It defines yarn twist, discusses the objectives of twisting yarn, and describes the different types of twist including real and false twist. It also outlines the key parameters used to measure yarn twist, including twist direction, twist factor/multiplier, and twist level measured in turns per unit length. Methods for measuring twist in single and plied yarns are also presented. The document discusses the relationship between increased twist level and increased yarn strength up to a point, after which further twist causes weakness. References on the topic are provided at the end.
Frictional Properties of Textile Fibers
Friction is an important property of textile fibers that affects their processing and performance. The document outlines different types of friction and factors that influence the frictional intensity of textile materials, such as composition, surface properties, weight, pressure, and humidity. It also discusses how lubricants can reduce frictional forces and methods for minimizing friction during textile production, including sizing of yarns and chemical treatments of fibers. Proper control and understanding of friction is necessary for efficient textile manufacturing and maintenance of optimum frictional limits.
XYZ Co. | 3 Eyed Ravens | BIT FEST
This is my first business case-solving presentation slide in the BIT FEST 2019.
Team: 3 Eyed Ravens
Pich Date: September 07, 2019
PRISM - Aiding Towards Intelligence | Team Cosmic Travellers | Amra Notun Net...
Startup Idea: We the Olympians
Team: Cosmic Travellers
Platform: Amra Notun Network (আমরা নতুন নেটওয়ার্ক)
Pitch Date: March 09, 2019
KUET TexBOT Launching Pitch Deck
'KUET TEXBOT' is an automated Facebook messenger AI that is actually a texting robot generated for helping students of Dept. of Textile Engineering to find academic stuff more easily on the internet. It is said as 'Personal Assistant' which provides us academic stuff such as portable books and other information by any users. Besides students use this for their course registration, renew books & hall meals on/off. The special feature of this BOT is to broadcast daily academic instantly.
To get an overview: m.me/kuet.texbot
Facebook Page: fb.com/kuet.texbot
PVC Fiber
POLYVINYL CHLORIDE (PVC)
INTRODUCTION:
Polyvinyl chloride: polyvinyl, vinyl
(Abbreviated: PVC) is the world's third-most widely produced synthetic plastic Polymer, after polyethylene and polypropylene. About 40 million tonnes are produced per year. PVC comes in two basic forms: rigid (sometimes abbreviated as RPVC) and flexible. The rigid form of PVC is used in construction for pipe and in profile Applications such as doors and windows. It is also used in making bottles, non-food Packaging, and cards (such as bank or membership cards). It can be made softer and More flexible by the addition of plasticizers, the most widely used being phthalates.
In this form, it is also used in plumbing, electrical cable insulation, imitation leather, Flooring, signage, phonograph records, inflatable products, and many applications where it replaces rubber. With cotton or linen, it is used to make canvas. Pure polyvinyl chloride is a white, brittle solid. It is insoluble in alcohol but slightly Soluble in tetrahydrofuran.
MANUFACTURING PROCESS:
Polyvinyl chloride is produced by polymerization of the vinyl chloride monomer (VCM), as shown. About 80% of production involves suspension polymerization. Emulsion polymerization accounts for about 12%, and bulk polymerization accounts for 8%. Suspension polymerization affords particles with average diameters of 100–180 μm, whereas emulsion polymerization gives much smaller particles of average size around 0.2 μm. VCM and water are introduced into the reactor along with a polymerization initiator and other additives. The contents of the reaction vessel are pressurized and continually mixed to maintain the suspension and ensure a uniform particle size of the PVC resin. The reaction is exothermic and thus requires cooling. As the volume is reduced during the reaction (PVC is denser than VCM), water is continually added to the mixture to maintain the suspension. The polymerization of VCM is started by compounds called initiators that are mixed into the droplets. These compounds break down to start the radical chain reaction. Typical initiators include dioctanoyl peroxide and dicetyl peroxydicarbonate, both of which have fragile O-O bonds. Some initiators start the reaction rapidly but decay quickly, and other initiators have
Graphene (Textile Material Of The Future)
Graphene is the thinnest material known to the world and only one atom thick, an atom is a million times thinner than the diameter of a single human hair. It has some amazing properties, it is fantastically strong, very light, extremely flexible, highly transparent and it conducts electricity and heat better than almost any other material. This new material of the future will revolutionize all sectors, including the textile sector, both from the technical point of view and from the design of intelligent clothing.
It can be applied in smart textile temperature sensors, electrical sensors and can replace synthetic fibers (polyester, nylon), due to the lightness, greater elasticity and greater conductivity. It can also reduce weight in clothes, and decrease the storage volume of them. The graphene fibers can be used to introduce chemical sensing properties into textile materials by means of a screen printing method.
Jute Fiber
The document does not contain any meaningful information to summarize. It consists of blank lines and the words "THANK YOU" without any other context.
Nomex & Kevlar (Faraday Suit, Lineman Suit, Firefighter Suit, Racing Suit, Mi...
1. Lineman Suit (Faraday Suit)
2. Fire Fighter (Nomex & Kevlar)
|| Innovation of Textile ||
If you stand in a thunderstorm holding a metal lightning rod, chances are you'll get struck by lightning. So why do linemen who work on high-voltage wires wear suits infused with metal? It all comes down to electricity's predictable behavior. When electrons meet a good conductor, like metal, they glide so easily over it that they hardly penetrate the surface. If that metal is a container, like a cage or a suit, the electricity never reaches the inside, keeping its contents—whether that's a computer or a person—safe from harmful shocks. A grounded metal enclosure designed to protect its contents from electric charges is known as a Faraday cage, and it appears in everything from microwaves to TV cables. The uniforms worn by linemen are known as Faraday suits and are designed with a combination of stainless steel fibers and fire-retardant fabric to ensure they're both protective and lightweight enough to get the job done comfortably.
More from Mobin Mithun (20)
Store Closure of Decathlon Sports Bangladesh - A Case Study
Store Closure of Decathlon Sports Bangladesh - A Case Study
Bleaching Process of Cotton Goods in Winch Machine
Bleaching Process of Cotton Goods in Winch Machine
Acing The Interview | Team Blue Archers | GP Explorers 2.0
Acing The Interview | Team Blue Archers | GP Explorers 2.0
Creative Branding Ideas and Timeline (HULT Prize at KUET 2020-21)
Creative Branding Ideas and Timeline (HULT Prize at KUET 2020-21)
PRISM - Aiding Towards Intelligence | Team Cosmic Travellers | Amra Notun Net...
PRISM - Aiding Towards Intelligence | Team Cosmic Travellers | Amra Notun Net...
Nomex & Kevlar (Faraday Suit, Lineman Suit, Firefighter Suit, Racing Suit, Mi...
Nomex & Kevlar (Faraday Suit, Lineman Suit, Firefighter Suit, Racing Suit, Mi...
Recently uploaded
Using-Presentation-Software-to-the-Fullf.pptx
Slides on 7 Commonly Used Presentation Softwares; thier usage and features.
Artificial Intelligence, Data and Competition – ČORBA – June 2024 OECD discus...
Artificial Intelligence, Data and Competition – ČORBA – June 2024 OECD discus...OECD Directorate for Financial and Enterprise Affairs
This presentation by Juraj Čorba, Chair of OECD Working Party on Artificial Intelligence Governance (AIGO), was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...OECD Directorate for Financial and Enterprise Affairs
This presentation by OECD, OECD Secretariat, was made during the discussion “Competition and Regulation in Professions and Occupations” held at the 77th meeting of the OECD Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found at oe.cd/crps.
This presentation was uploaded with the author’s consent.
IEEE CIS Webinar Sustainable futures.pdf
The importance of sustainable and efficient computational practices in artificial intelligence (AI) and deep learning has become increasingly critical. This webinar focuses on the intersection of sustainability and AI, highlighting the significance of energy-efficient deep learning, innovative randomization techniques in neural networks, the potential of reservoir computing, and the cutting-edge realm of neuromorphic computing. This webinar aims to connect theoretical knowledge with practical applications and provide insights into how these innovative approaches can lead to more robust, efficient, and environmentally conscious AI systems.
Webinar Speaker: Prof. Claudio Gallicchio, Assistant Professor, University of Pisa
Claudio Gallicchio is an Assistant Professor at the Department of Computer Science of the University of Pisa, Italy. His research involves merging concepts from Deep Learning, Dynamical Systems, and Randomized Neural Systems, and he has co-authored over 100 scientific publications on the subject. He is the founder of the IEEE CIS Task Force on Reservoir Computing, and the co-founder and chair of the IEEE Task Force on Randomization-based Neural Networks and Learning Systems. He is an associate editor of IEEE Transactions on Neural Networks and Learning Systems (TNNLS).
Carrer goals.pptx and their importance in real life
Career goals serve as a roadmap for individuals, guiding them toward achieving long-term professional aspirations and personal fulfillment. Establishing clear career goals enables professionals to focus their efforts on developing specific skills, gaining relevant experience, and making strategic decisions that align with their desired career trajectory. By setting both short-term and long-term objectives, individuals can systematically track their progress, make necessary adjustments, and stay motivated. Short-term goals often include acquiring new qualifications, mastering particular competencies, or securing a specific role, while long-term goals might encompass reaching executive positions, becoming industry experts, or launching entrepreneurial ventures.
Moreover, having well-defined career goals fosters a sense of purpose and direction, enhancing job satisfaction and overall productivity. It encourages continuous learning and adaptation, as professionals remain attuned to industry trends and evolving job market demands. Career goals also facilitate better time management and resource allocation, as individuals prioritize tasks and opportunities that advance their professional growth. In addition, articulating career goals can aid in networking and mentorship, as it allows individuals to communicate their aspirations clearly to potential mentors, colleagues, and employers, thereby opening doors to valuable guidance and support. Ultimately, career goals are integral to personal and professional development, driving individuals toward sustained success and fulfillment in their chosen fields.
The Intersection between Competition and Data Privacy – OECD – June 2024 OECD...
The Intersection between Competition and Data Privacy – OECD – June 2024 OECD...OECD Directorate for Financial and Enterprise Affairs
This presentation by OECD, OECD Secretariat, was made during the discussion “The Intersection between Competition and Data Privacy” held at the 143rd meeting of the OECD Competition Committee on 13 June 2024. More papers and presentations on the topic can be found at oe.cd/ibcdp.
This presentation was uploaded with the author’s consent.
The Intersection between Competition and Data Privacy – CAPEL – June 2024 OEC...
The Intersection between Competition and Data Privacy – CAPEL – June 2024 OEC...OECD Directorate for Financial and Enterprise Affairs
This presentation by Tim Capel, Director of the UK Information Commissioner’s Office Legal Service, was made during the discussion “The Intersection between Competition and Data Privacy” held at the 143rd meeting of the OECD Competition Committee on 13 June 2024. More papers and presentations on the topic can be found at oe.cd/ibcdp.
This presentation was uploaded with the author’s consent.
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Insight: In a landscape where traditional narrative structures are giving way to fragmented and non-linear forms of storytelling, there lies immense potential for creativity and exploration.
'Collapsing Narratives: Exploring Non-Linearity' is a micro report from Rosie Wells.
Rosie Wells is an Arts & Cultural Strategist uniquely positioned at the intersection of grassroots and mainstream storytelling.
Their work is focused on developing meaningful and lasting connections that can drive social change.
Please download this presentation to enjoy the hyperlinks!
Artificial Intelligence, Data and Competition – SCHREPEL – June 2024 OECD dis...
Artificial Intelligence, Data and Competition – SCHREPEL – June 2024 OECD dis...OECD Directorate for Financial and Enterprise Affairs
This presentation by Thibault Schrepel, Associate Professor of Law at Vrije Universiteit Amsterdam University, was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
The Intersection between Competition and Data Privacy – COLANGELO – June 2024...
The Intersection between Competition and Data Privacy – COLANGELO – June 2024...OECD Directorate for Financial and Enterprise Affairs
This presentation by Professor Giuseppe Colangelo, Jean Monnet Professor of European Innovation Policy, was made during the discussion “The Intersection between Competition and Data Privacy” held at the 143rd meeting of the OECD Competition Committee on 13 June 2024. More papers and presentations on the topic can be found at oe.cd/ibcdp.
This presentation was uploaded with the author’s consent.
BRIC_2024_2024-06-06-11:30-haunschild_archival_version.pdf
These are the slides of my presentation at BRIC 2024 about global science overlay maps using OpenAlex.
Competition and Regulation in Professions and Occupations – ROBSON – June 202...
Competition and Regulation in Professions and Occupations – ROBSON – June 202...OECD Directorate for Financial and Enterprise Affairs
This presentation by Professor Alex Robson, Deputy Chair of Australia’s Productivity Commission, was made during the discussion “Competition and Regulation in Professions and Occupations” held at the 77th meeting of the OECD Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found at oe.cd/crps.
This presentation was uploaded with the author’s consent.The remarkable life of Sir Mokshagundam Visvesvaraya.pptx
The remarkable life of Sir Mokshagundam Visvesvaraya.pptx
Pro-competitive Industrial Policy – OECD – June 2024 OECD discussion
Pro-competitive Industrial Policy – OECD – June 2024 OECD discussionOECD Directorate for Financial and Enterprise Affairs
This presentation by OECD, OECD Secretariat, was made during the discussion “Pro-competitive Industrial Policy” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/pcip.
This presentation was uploaded with the author’s consent.
The Intersection between Competition and Data Privacy – KEMP – June 2024 OECD...
The Intersection between Competition and Data Privacy – KEMP – June 2024 OECD...OECD Directorate for Financial and Enterprise Affairs
This presentation by Katharine Kemp, Associate Professor at the Faculty of Law & Justice at UNSW Sydney, was made during the discussion “The Intersection between Competition and Data Privacy” held at the 143rd meeting of the OECD Competition Committee on 13 June 2024. More papers and presentations on the topic can be found at oe.cd/ibcdp.
This presentation was uploaded with the author’s consent.
Pro-competitive Industrial Policy – LANE – June 2024 OECD discussion
Pro-competitive Industrial Policy – LANE – June 2024 OECD discussionOECD Directorate for Financial and Enterprise Affairs
This presentation by Nathaniel Lane, Associate Professor in Economics at Oxford University, was made during the discussion “Pro-competitive Industrial Policy” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/pcip.
This presentation was uploaded with the author’s consent.
Artificial Intelligence, Data and Competition – LIM – June 2024 OECD discussion
Artificial Intelligence, Data and Competition – LIM – June 2024 OECD discussionOECD Directorate for Financial and Enterprise Affairs
This presentation by Yong Lim, Professor of Economic Law at Seoul National University School of Law, was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
原版制作贝德福特大学毕业证（bedfordhire毕业证）硕士文凭原版一模一样
原版一模一样【微信：741003700 】【贝德福特大学毕业证（bedfordhire毕业证）硕士文凭】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
ASONAM2023_presection_slide_track-recommendation.pdf
Presented at the 2023 IEEE/ACM International Conference on
Advances in Social Networks Analysis and Mining.
Recently uploaded (20)
Artificial Intelligence, Data and Competition – ČORBA – June 2024 OECD discus...
Artificial Intelligence, Data and Competition – ČORBA – June 2024 OECD discus...
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Carrer goals.pptx and their importance in real life
Carrer goals.pptx and their importance in real life
The Intersection between Competition and Data Privacy – OECD – June 2024 OECD...
The Intersection between Competition and Data Privacy – OECD – June 2024 OECD...
The Intersection between Competition and Data Privacy – CAPEL – June 2024 OEC...
The Intersection between Competition and Data Privacy – CAPEL – June 2024 OEC...
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Artificial Intelligence, Data and Competition – SCHREPEL – June 2024 OECD dis...
Artificial Intelligence, Data and Competition – SCHREPEL – June 2024 OECD dis...
The Intersection between Competition and Data Privacy – COLANGELO – June 2024...
The Intersection between Competition and Data Privacy – COLANGELO – June 2024...
BRIC_2024_2024-06-06-11:30-haunschild_archival_version.pdf
BRIC_2024_2024-06-06-11:30-haunschild_archival_version.pdf
Competition and Regulation in Professions and Occupations – ROBSON – June 202...
Competition and Regulation in Professions and Occupations – ROBSON – June 202...
The remarkable life of Sir Mokshagundam Visvesvaraya.pptx
The remarkable life of Sir Mokshagundam Visvesvaraya.pptx
Pro-competitive Industrial Policy – OECD – June 2024 OECD discussion
Pro-competitive Industrial Policy – OECD – June 2024 OECD discussion
The Intersection between Competition and Data Privacy – KEMP – June 2024 OECD...
The Intersection between Competition and Data Privacy – KEMP – June 2024 OECD...
Pro-competitive Industrial Policy – LANE – June 2024 OECD discussion
Pro-competitive Industrial Policy – LANE – June 2024 OECD discussion
Artificial Intelligence, Data and Competition – LIM – June 2024 OECD discussion
Artificial Intelligence, Data and Competition – LIM – June 2024 OECD discussion
ASONAM2023_presection_slide_track-recommendation.pdf
ASONAM2023_presection_slide_track-recommendation.pdf
Govt. Corona Hospital | Team Illinois | BuiltTech 4.0
- 1. Govt. Corona Hospital F i r s t M o d u l a r C o n s t r u c t i o n i n B a n g l a d e s h
- 2. Ehsanul Haque HasibRisat Rahman Md. Ahsanul Mobin ILLINOIS TEAM
- 3. Situation Analysis Imagine that Bangladesh have been affected by one of the most dangerous viruses recorded in the world! The fear and curiosity has been spread among the people of the country! Now it is a big concern to move this affected people to a safe place.
- 4. Big Idea Modular Construction Container Modular construction is a process in which a building is constructed off-site, under controlled plant conditions, using the same materials and designing to the same codes and standards as conventionally built facilities – but in about half the time. Buildings are produced in “modules” that when put together on site, reflect the identical design intent and specifications of the most sophisticated site-built facility – without compromise.
- 5. Why We Are Using Steel Container? • We have used biodegradable and recyclable materials. • We have installed water saving fixtures which reduces water wastage. • All the rooms will be kept in a negative pressure where the polluted air will be sucked out in a central duct system. The best way to make the construction rapid is to built identical building elements such: • Steel Containers • Door & Windows • Medical equipment • And others
- 6. Front View Side View Top View Architectural Views
- 7. Geographical Selection We’ve selected Keraniganj due to the following reasons: • Close to Dhaka • Has a good transportation system. • Has less population. • Slightly aloof from residential area but not far enough. • Sound proof area.
- 9. TIMELINE Our estimated project timeline is shown below: 48 hrs Project Planning Preparation of Site 24 hrs
- 10. 3 days Building Hospitals Skeleton 6 days Building Foundation 5 days Installing The Containers
- 11. 2 days Finishing Of Building Structures 1 day Installation Of Medical Equipment
- 12. Site Preparation Building Skeleton FinishingContainer Installation
- 13. Cost of Construction Items Rate Unit Total Cost Container Cost 80,000 800 640,00,000 Land Cost 3500000 2 acres 70,00,000 Site Management 200 3,00,000 Labour Cost varies 1000 12,00,000 Engineers Cost 10 100,00,000 Construction Cost 13000,00,000 Doors and Windows 10000 1500 150,00,000 Waste Treatment 10000000 1 100,00,000 Miscellaneous Cost 500000 5,00,000 TOTAL 140,80,00,000
- 14. Waste Management • For Rapid construction steel is best material • This will lower the cost and time of construction • This will be easier to put and easier to joint the parts together • The main advantage is that it will be reusable and recyclable