The student reviews their performance on an assignment consisting of 7 tasks. For several of the tasks, they did not complete the work on time due to being absent from class for a medical procedure and losing multiple drafts. They acknowledge that they need to be more organized and check requirements on the learning platform more regularly to avoid missing elements. They received positive feedback on their robot design and mood board but were asked to provide more documentation for the production log.

1. Review
For this assignment I think I have done a good job on it. I think I will
get a merit on it.
In task 1 when we had to do a project charter I had to do that near
the end and answer how I would have at the start of it. I think I
missed it because i had a week of for my operation so I think I missed
it but that really isn’t an excuse because it is on Moodle where I
should have checked if I have done it properly.
In task 2 we had to do a schedual. I again didn’t do this when I should
have so I did it to the dates I could remember working. I suppose this
means I should be more aware of what I have to do when and keep
checking on moodle if I have missed anything.
In task 3 we had to do a mood board of robots. I did this at home and
I think that I did well on it. I think this because there are robots with
different types of robot. For example there is a robot from real steel
which its purpose is to box. And there is C3-PO who doesn’t like
fights and normally gets scared.
In task 4 we had to come up with some ideas for our robot to do. I
had to do this 3 times as I had lost the previous 2 and on the 3rd one I
did it after I had done the robot so I suppose It shows that I need be
more aware of where my stuff is.

2. In task 5 we had to do plans for our robot. I did a plan for the front
and back. But because I kept doing them along with task 4 so I lost
them and had to do it 3 times and did them after I had done the
robot.
In task 6 we made the robot in modler. We had to do a production
log as we did the root. I think the robot is god but maybe a bit simple
compared to other peoples work. I thought I was good in doing the
production log as I went along but at the end of it the teacher though
I should do more screenshots and explanation so some of the
production log is done after I made the robot. After I had finished it I
put in the ideas generation and the robot plans at the top.
In task 7 we had to put the robot into layout. Where were supposed
to take pictures of the rendered robot. The point of this was so that
you could see the robot 360 degrees.