A sterile area is required for tissue culture labs to prevent contamination. The document outlines requirements for the sterile area including filtering air with HEPA filters, maintaining positive pressure, limiting windows and doors. It also lists essential equipment for cell culture like laminar flow cabinets, incubators, centrifuges, microscopes, and autoclaves. Proper hygiene is important as well, with researchers wearing protective coats, masks, gloves and goggles.
Quality control on secondary packaging materialsAnupriyaNR
Presentation on quality control tests for the secondary packaging materials. Includes the materials used for secondary packaging, ideal properties of the secondary packaging material and various test procedures used for the quality control of the packaging materials.
QUALIFICATION OF UV-VISIBLE SPECTROPHOTOMETER, FTIR, DSC, HPLCAnupriyaNR
Analytical method qualification consists of a simplified evaluation of a subset of validation characteristics with a goal to demonstrate that an analytical method is scientifically sound and suitable for its intended use. In contrast to validation, analytical method qualification is performed without predefined acceptability criteria. Qualification may be performed as a prerequisite to method validation, or when an assay for product knowledge has not yet been established as a test for a critical product quality attribute. Qualification of equipment is pre-requisite for validation of the process in which the equipment is being used. Many types of equipment have measuring devices on them. Calibration of measuring devices is a part of qualification. Calibration of measuring devices is important, as the data is often collected through them. If the data collected is not from measuring devices that have been calibrated, the data cannot be relied upon. Thus the whole validation exercise can be questioned.
Document Maintenance in Pharmaceutical IndustryNAKUL DHORE
Document Maintenance in Pharmaceutical Industry.
By_ NAKUL DHORE
❖ Introduction
❖ Batch Formula Record
❖ Master Formula Record
❖ SOPs
❖ Quality Audit
❖ Quality Review & Quality Documentation
❖ Reports & Documents
❖ Distribution Records
❖ MCQs
Quality Assurance
As per B.PHARM 3rd Year Semester-6
(PCI Syllabus New)
Quality control on secondary packaging materialsAnupriyaNR
Presentation on quality control tests for the secondary packaging materials. Includes the materials used for secondary packaging, ideal properties of the secondary packaging material and various test procedures used for the quality control of the packaging materials.
QUALIFICATION OF UV-VISIBLE SPECTROPHOTOMETER, FTIR, DSC, HPLCAnupriyaNR
Analytical method qualification consists of a simplified evaluation of a subset of validation characteristics with a goal to demonstrate that an analytical method is scientifically sound and suitable for its intended use. In contrast to validation, analytical method qualification is performed without predefined acceptability criteria. Qualification may be performed as a prerequisite to method validation, or when an assay for product knowledge has not yet been established as a test for a critical product quality attribute. Qualification of equipment is pre-requisite for validation of the process in which the equipment is being used. Many types of equipment have measuring devices on them. Calibration of measuring devices is a part of qualification. Calibration of measuring devices is important, as the data is often collected through them. If the data collected is not from measuring devices that have been calibrated, the data cannot be relied upon. Thus the whole validation exercise can be questioned.
Document Maintenance in Pharmaceutical IndustryNAKUL DHORE
Document Maintenance in Pharmaceutical Industry.
By_ NAKUL DHORE
❖ Introduction
❖ Batch Formula Record
❖ Master Formula Record
❖ SOPs
❖ Quality Audit
❖ Quality Review & Quality Documentation
❖ Reports & Documents
❖ Distribution Records
❖ MCQs
Quality Assurance
As per B.PHARM 3rd Year Semester-6
(PCI Syllabus New)
Unit 2 organization and personnel and permisies himanshuhimanshu kamboj
pharmaceutical quality assurance
b pharma 6th sem
Personnel objectives
Personnel qualifications
Personnel responsibilities
Key personnel
Responsibilities of the head of the production department
Responsibilities of the head of quality control department
Training
Personnel hygiene
Premises
Layout of pharmaceutical industry
Areas of premises
Environmental control in sterile areas
Equipment and raw materials
Stages of equipment
Cleaning and maintenance
Raw materials
Steps involved in purchase procedure
Maintenance of stores
Storage conditions
General Principles of Analytical Method of Validation.pdfTamannaKumari8
Validation is the process of establishing documentary evidence demonstrating that a procedure, process, activity carried out in
testing and then production maintain the desirable level of compliance all stages.
The process of providing the analytical procedure is acceptable or its intended us.(ICH Q
Unit 2 organization and personnel and permisies himanshuhimanshu kamboj
pharmaceutical quality assurance
b pharma 6th sem
Personnel objectives
Personnel qualifications
Personnel responsibilities
Key personnel
Responsibilities of the head of the production department
Responsibilities of the head of quality control department
Training
Personnel hygiene
Premises
Layout of pharmaceutical industry
Areas of premises
Environmental control in sterile areas
Equipment and raw materials
Stages of equipment
Cleaning and maintenance
Raw materials
Steps involved in purchase procedure
Maintenance of stores
Storage conditions
General Principles of Analytical Method of Validation.pdfTamannaKumari8
Validation is the process of establishing documentary evidence demonstrating that a procedure, process, activity carried out in
testing and then production maintain the desirable level of compliance all stages.
The process of providing the analytical procedure is acceptable or its intended us.(ICH Q
University Institute of Pharmaceutical Sciences is a flag bearer of excellence in Pharmaceutical education and research in the country. Here is another initiative to make study material available to everyone worldwide. Based on the new PCI guidelines and syllabus here we have a presentation dealing with "Aseptic requirements for parenteral products".
Thank you for reading.
Hope it was of help to you.
UIPS,PU team
State of-the-art growth chamber facilitiessaveerweb
Saveer has introduced a state-of-the-art growth chamber with advanced features such as humidity, control, temperature control and hi-tech light sensitivity patterns that are essential for a plants growth.
The title of this presentation is :-Establishment of animal tissue culture la...KESHAVPOSWAL
This presentation indicates that how to establish the animal tissue culture lab , what are the necessary conditions that should be taken into consideration while designing the animal tissue culture lab layout. It also emphasize on various instruments that generally used in any tissue culture lab.
ATCC y otros reguladores internacionales de bioderivados. Introduction to mic...Dr. Manuel Concepción
En la siguiente podemos ver como se integran productos terminados industriales sobre procesos de diagnóstico y tratamientos estandarizados, en este caso estamos hablando de bioreactores industriales y procesos de criogenización y liofilización, que son el stage 1 de un proceso industrial de biotecnología. Por que existen estas compañías certificadoras para que sociedades AEMED como la nuestra tengan una guía sobre la cual basar sus avances, hay muchas organizaciones privadas, públicas, y gubernamentales que se dedican a esto, elegí ATCC por que da formación específica gratuita y son asequibles y pueden colaborar en el futuro si AEMED esta a la altura con un proyecto propio.
Aseptic techniques in plant tissue culturekumarkanika
Importance of practising Aseptic Techniques in plant tissue culture and what are these techniques what precautions should be taken when doing tissue culture
Aseptic Area and Microbial Control. - Pharmaceutical Microbiology (SYBpharm) ...Kiran Shinde
Prof.Mr.Kiran K. Shinde (M.Pharm), Assistant professor (VNIPRC)
Pharmaceutical microbiology (Second year b.pharm) (3rd semester)
Introduction to Aseptic area & room
Designing of Aseptic Room
Laminar Airflow Equipment
Sources of Contamination & Method of Prevention
Classification of Aseptic Area-Room
Testing of Clean Aseptic Room
Introduction:
RNA interference (RNAi) or Post-Transcriptional Gene Silencing (PTGS) is an important biological process for modulating eukaryotic gene expression.
It is highly conserved process of posttranscriptional gene silencing by which double stranded RNA (dsRNA) causes sequence-specific degradation of mRNA sequences.
dsRNA-induced gene silencing (RNAi) is reported in a wide range of eukaryotes ranging from worms, insects, mammals and plants.
This process mediates resistance to both endogenous parasitic and exogenous pathogenic nucleic acids, and regulates the expression of protein-coding genes.
What are small ncRNAs?
micro RNA (miRNA)
short interfering RNA (siRNA)
Properties of small non-coding RNA:
Involved in silencing mRNA transcripts.
Called “small” because they are usually only about 21-24 nucleotides long.
Synthesized by first cutting up longer precursor sequences (like the 61nt one that Lee discovered).
Silence an mRNA by base pairing with some sequence on the mRNA.
Discovery of siRNA?
The first small RNA:
In 1993 Rosalind Lee (Victor Ambros lab) was studying a non- coding gene in C. elegans, lin-4, that was involved in silencing of another gene, lin-14, at the appropriate time in the
development of the worm C. elegans.
Two small transcripts of lin-4 (22nt and 61nt) were found to be complementary to a sequence in the 3' UTR of lin-14.
Because lin-4 encoded no protein, she deduced that it must be these transcripts that are causing the silencing by RNA-RNA interactions.
Types of RNAi ( non coding RNA)
MiRNA
Length (23-25 nt)
Trans acting
Binds with target MRNA in mismatch
Translation inhibition
Si RNA
Length 21 nt.
Cis acting
Bind with target Mrna in perfect complementary sequence
Piwi-RNA
Length ; 25 to 36 nt.
Expressed in Germ Cells
Regulates trnasposomes activity
MECHANISM OF RNAI:
First the double-stranded RNA teams up with a protein complex named Dicer, which cuts the long RNA into short pieces.
Then another protein complex called RISC (RNA-induced silencing complex) discards one of the two RNA strands.
The RISC-docked, single-stranded RNA then pairs with the homologous mRNA and destroys it.
THE RISC COMPLEX:
RISC is large(>500kD) RNA multi- protein Binding complex which triggers MRNA degradation in response to MRNA
Unwinding of double stranded Si RNA by ATP independent Helicase
Active component of RISC is Ago proteins( ENDONUCLEASE) which cleave target MRNA.
DICER: endonuclease (RNase Family III)
Argonaute: Central Component of the RNA-Induced Silencing Complex (RISC)
One strand of the dsRNA produced by Dicer is retained in the RISC complex in association with Argonaute
ARGONAUTE PROTEIN :
1.PAZ(PIWI/Argonaute/ Zwille)- Recognition of target MRNA
2.PIWI (p-element induced wimpy Testis)- breaks Phosphodiester bond of mRNA.)RNAse H activity.
MiRNA:
The Double-stranded RNAs are naturally produced in eukaryotic cells during development, and they have a key role in regulating gene expression .
Observation of Io’s Resurfacing via Plume Deposition Using Ground-based Adapt...Sérgio Sacani
Since volcanic activity was first discovered on Io from Voyager images in 1979, changes
on Io’s surface have been monitored from both spacecraft and ground-based telescopes.
Here, we present the highest spatial resolution images of Io ever obtained from a groundbased telescope. These images, acquired by the SHARK-VIS instrument on the Large
Binocular Telescope, show evidence of a major resurfacing event on Io’s trailing hemisphere. When compared to the most recent spacecraft images, the SHARK-VIS images
show that a plume deposit from a powerful eruption at Pillan Patera has covered part
of the long-lived Pele plume deposit. Although this type of resurfacing event may be common on Io, few have been detected due to the rarity of spacecraft visits and the previously low spatial resolution available from Earth-based telescopes. The SHARK-VIS instrument ushers in a new era of high resolution imaging of Io’s surface using adaptive
optics at visible wavelengths.
The increased availability of biomedical data, particularly in the public domain, offers the opportunity to better understand human health and to develop effective therapeutics for a wide range of unmet medical needs. However, data scientists remain stymied by the fact that data remain hard to find and to productively reuse because data and their metadata i) are wholly inaccessible, ii) are in non-standard or incompatible representations, iii) do not conform to community standards, and iv) have unclear or highly restricted terms and conditions that preclude legitimate reuse. These limitations require a rethink on data can be made machine and AI-ready - the key motivation behind the FAIR Guiding Principles. Concurrently, while recent efforts have explored the use of deep learning to fuse disparate data into predictive models for a wide range of biomedical applications, these models often fail even when the correct answer is already known, and fail to explain individual predictions in terms that data scientists can appreciate. These limitations suggest that new methods to produce practical artificial intelligence are still needed.
In this talk, I will discuss our work in (1) building an integrative knowledge infrastructure to prepare FAIR and "AI-ready" data and services along with (2) neurosymbolic AI methods to improve the quality of predictions and to generate plausible explanations. Attention is given to standards, platforms, and methods to wrangle knowledge into simple, but effective semantic and latent representations, and to make these available into standards-compliant and discoverable interfaces that can be used in model building, validation, and explanation. Our work, and those of others in the field, creates a baseline for building trustworthy and easy to deploy AI models in biomedicine.
Bio
Dr. Michel Dumontier is the Distinguished Professor of Data Science at Maastricht University, founder and executive director of the Institute of Data Science, and co-founder of the FAIR (Findable, Accessible, Interoperable and Reusable) data principles. His research explores socio-technological approaches for responsible discovery science, which includes collaborative multi-modal knowledge graphs, privacy-preserving distributed data mining, and AI methods for drug discovery and personalized medicine. His work is supported through the Dutch National Research Agenda, the Netherlands Organisation for Scientific Research, Horizon Europe, the European Open Science Cloud, the US National Institutes of Health, and a Marie-Curie Innovative Training Network. He is the editor-in-chief for the journal Data Science and is internationally recognized for his contributions in bioinformatics, biomedical informatics, and semantic technologies including ontologies and linked data.
Seminar of U.V. Spectroscopy by SAMIR PANDASAMIR PANDA
Spectroscopy is a branch of science dealing the study of interaction of electromagnetic radiation with matter.
Ultraviolet-visible spectroscopy refers to absorption spectroscopy or reflect spectroscopy in the UV-VIS spectral region.
Ultraviolet-visible spectroscopy is an analytical method that can measure the amount of light received by the analyte.
2. INTRODUCTION
Sterile Area is a mandatory requirement
for tissue culture labs.
Some of the specific equipment and
techniques are required for the
maintenance of cell cultures. A rule of
thumb is that the more equipment you
get, the more efficient cell culturing you
perform.
3. Sterile Area
A successful cell culture depends on an
contamination free area.
Sterile area should be located in a quite
area and should be restricted to tissue
culture
The largest area should be given for
culture operations, it should be cluster
free
4. The room should be provided with
filtered air. A HEPA filtered is most
desirable
A tissue culture lab should have positive
pressure
UV may be used to filter the air.
5. WINDOWS –
Should be limited in number
Should be non open able
Sole purpose illumination not ventilation
DOORS –
Should be limited in number
Door openings need to be extra wide,
typically at least 1 m full clearance, and
corners designed that large equipment
can get by