The document describes the components and functioning of a solar-powered car. It discusses the solar array that collects sunlight and converts it to electricity, power trackers that adjust the voltage for the car's systems, batteries that store energy for the motor, and the motor and controller that use the stored energy to power the wheels. It also notes that emergency batteries would power the car if there was no sunlight to charge through the solar array.
We can reduce pollution by switching over to electric vehicles and to popularize wide usage we have to remove distance anxiety. To remove that this presentation Anywhere Anytime Charging through annual subscription at solar charging stations. Give me a feedback.
We can reduce pollution by switching over to electric vehicles and to popularize wide usage we have to remove distance anxiety. To remove that this presentation Anywhere Anytime Charging through annual subscription at solar charging stations. Give me a feedback.
This slide explains the working model of the solar car, its introduction, History, Backgroud of solar energy, components of the solar car, solar array, power tracker , electric motor, battery details and speed controller, wheels, Design explanation, how it works ,working principle of the solar cell, advantages ,....etc
Fabrication of Prototype Model of Infrared Sensor Based Regenerative Braking...IJMER
The objective of this paper is to stored the kinetic energy dissipated in the brakes to accelerate
the vehicle. This project is based on prototype model of Regenerative braking system using electromagnetic
clutch. Regenerative braking results in an increase in energy output for a given energy input to a vehicle,
the efficiency is improved. The amount of work done by the engine of the vehicle is reduced, in turn
reducing the amount of prime energy required to propel the vehicle. In order for a regenerative braking
system to be cost effective the prime energy saved over a specified lifetime must offset the initial cost, size
and weight penalties of the system. The energy storage unit must be compact, durable and capable of
handling high power levels efficiently. The energy can be directly provided to dynamo itself to generate
current and will be displayed on the Ammeter installed in the set up. This set up also consists of an Infrared
Sensor which helps to prevent the frequency of accidents increasing due to inefficient braking system and
therefore can be considerably avoided using IR sensors. The vehicle instantly stops as any object appears
in front of it where IR Sensors are installed.
regenerative breaking is energy conversion method .by using conventional braking more energy is lossed in the form of heat by using this we can convert this energy into usefull forms
3. Components
Solar Array
Power Trackers
Batteries
Motor & Controller
What Will Happen if There is No Sunlight
4. Solar Array
Collect the energy from
the sun and converts it
into usable electrical
energy.
5. How solar array change sunlight to
usable energy
First thing the solar
array collect sunlight
together.
When sunlight is
collected together. It
immediately change the
sunlight to electricity.
Next step is to the
power tracker.
6. Power Trackers
Power trackers convert
the solar array voltage
to the system voltage.
7. Power tracker role
In this step the power
tracker in the car
receive the energy from
the solar array, and
change the energy that
it receive to energy that
the car can be use
After it convert energy,
it send the energy to
the battery.
8. Batteries
The batteries store
energy from the power
tracker and makes
them available for the
motor's use.
9. Use of battery
After the power tracker
convert the energy to
the energy that is
usable for the car, it
send to the battery then
the battery store the
energy.
This energy is send to
the motor and controller
to make the car run.
10. Motor & Controller
The motor controller
adjusts the amount of
energy that flows to the
motor to correspond to
the throttle.
The motor uses that
energy to drive the
wheels
11. How Solar-Power Car runs
When the energy is send
from the battery to the
motor, the motor adjust the
amount of energy that flows
to the throttle. The motors
use the energy that receive
to run the wheel.
This is the process how
solar car runs
12. Solar Car brake
Kinds of break:
Friction brake is a type of automotive that
restore heat in the rotating part (drum brake or
disc brake) brake during the application and
then release it in the air.
Drum brake if you press with your leg the
brake is connected to the wheel that is
spinning.
Disc brake this one brake all the wheels
together and make the car slow down or stop at
that momentใ
13. Hand brake
In cars hand brake can
also help you when you
park your car in
shopping mall to not let
someone move your.
Another way to call
hand brake is
emergency brake e-
brake, park brake, slide
stick, or parking brake.
14. What Will Happen if There is No
Sunlight?
If there is no sunlight,
the emergency
batteries will be used.
Example in the situation
that there was a large
cloud cover the sky,
this emergency
batteries will be used.