Sm bat datasheet_rev1.0_20050511
•
0 likes•111 views
The SM BAT supervision module monitors the condition and status of battery backups at telecom sites to provide information and alarms. It is installed on the DC power system and connected to the battery backup to measure voltages, current, and temperatures. This detailed battery backup information and any alarms can be monitored through a web browser or management software from a remote location. This allows maintenance to be optimized for remote sites to lower costs and increase battery backup availability through automated testing and monitoring.
Report
Share
Report
Share
Download to read offline
Recommended
Sm io datasheet_rev1.0_20050511
The SM IO module provides monitoring of auxiliary equipment such as climate control units through detailed information and alarms. When maintenance is performed using the information from SM IO, time and money can be saved especially for remotely located sites. The SM IO connects to the DC power system's control unit and monitors auxiliary units. Information and alarms regarding the auxiliary equipment can be monitored through a web browser or management software. Benefits include lower maintenance costs and higher availability through remote monitoring and control of site equipment.
Wsp hospital e
Protect your data and critical equipment. UST Power protected hospitals increase safety, reliability and efficiency.
Battery monitoring system
JUNXY's key power solutions for your standby power system, product ranges include: battery load bank, battery resistance & conductance tester, battery charger, battery regenerator for single cell and string, battery monitoring system, battery manageme"
NDOKI VILLAGE
This document provides design briefs for multiple building systems:
1. The electrical system design brief specifies that the panel(s) will be factory wired and tested and include an isolation transformer, primary and secondary circuit breakers, and LIM. It also describes monitoring and alarm features required for operating room hospital panels.
2. Briefs are also provided for plumbing, fire fighting, and HVAC systems, but no details are given.
Ecopowersupplies: Riello sentinel-pro-ups-datasheet
The Sentinel Pro UPS provides reliable power protection for servers and IT equipment through its online double conversion technology (VFI). It offers flexible operating modes, battery optimization features, expandable runtime, and low noise level under 40 dBA. Communication and management options include USB, serial, and software. Models range from 700VA to 3000VA.
Circuit breaker Maintenance By Mobile Agent Software Technology
This seminar report discusses using mobile agent software technology for circuit breaker maintenance. It outlines the types of circuit breakers and components that require maintenance. The report proposes a maintenance system using software agents that can autonomously gather information from distributed sources like the enterprise maintenance system and substation concentrators. The mobile agents would help create failure reports, monitor circuit breakers, and facilitate information sharing between the maintenance crew and databases. The approach provides advantages like automated information retrieval, report generation, and security while reducing maintenance costs and workload.
COPS: An Arresting Look at NEC Article 708
The document discusses an arresting look at NEC Article 708 which establishes requirements for critical operations power systems. It provides an overview of a webcast on the topic with multiple presenters discussing key aspects of Article 708 such as operational availability, how it relates to other NEC articles, and ensuring public acceptance. The presenters aim to provide takeaways on several learning objectives related to understanding and implementing Article 708.
Service solahart ciputat 081313462267
Service Solahart Ciputat Pemanas Air Solar Water Heater Tenaga Matahari Solahart ahli Dalam rangka untuk memastikan layanan terbaik dan saran, Solahart pemanas air tenaga surya dan sistem tenaga surya hanya tersedia melalui Expert Solahart lokal Anda. Dan dengan cakupan seluruh Australia ada satu tidak jauh dari Anda. Cari ahli terdekat Anda di sini. Semua ahli kami dilatih dan memenuhi syarat untuk menilai rumah Anda atau bisnis dan penggunaan energi Anda. Konsultasi surya GRATIS kami menjamin Anda mendapatkan solusi terbaik mutlak surya untuk situasi Anda. Buku gratis di rumah surya kutipan di sini. Tidak hanya installer sistem tenaga surya kita diakreditasi oleh Dewan Energi Bersih
Recommended
Sm io datasheet_rev1.0_20050511
The SM IO module provides monitoring of auxiliary equipment such as climate control units through detailed information and alarms. When maintenance is performed using the information from SM IO, time and money can be saved especially for remotely located sites. The SM IO connects to the DC power system's control unit and monitors auxiliary units. Information and alarms regarding the auxiliary equipment can be monitored through a web browser or management software. Benefits include lower maintenance costs and higher availability through remote monitoring and control of site equipment.
Wsp hospital e
Protect your data and critical equipment. UST Power protected hospitals increase safety, reliability and efficiency.
Battery monitoring system
JUNXY's key power solutions for your standby power system, product ranges include: battery load bank, battery resistance & conductance tester, battery charger, battery regenerator for single cell and string, battery monitoring system, battery manageme"
NDOKI VILLAGE
This document provides design briefs for multiple building systems:
1. The electrical system design brief specifies that the panel(s) will be factory wired and tested and include an isolation transformer, primary and secondary circuit breakers, and LIM. It also describes monitoring and alarm features required for operating room hospital panels.
2. Briefs are also provided for plumbing, fire fighting, and HVAC systems, but no details are given.
Ecopowersupplies: Riello sentinel-pro-ups-datasheet
The Sentinel Pro UPS provides reliable power protection for servers and IT equipment through its online double conversion technology (VFI). It offers flexible operating modes, battery optimization features, expandable runtime, and low noise level under 40 dBA. Communication and management options include USB, serial, and software. Models range from 700VA to 3000VA.
Circuit breaker Maintenance By Mobile Agent Software Technology
This seminar report discusses using mobile agent software technology for circuit breaker maintenance. It outlines the types of circuit breakers and components that require maintenance. The report proposes a maintenance system using software agents that can autonomously gather information from distributed sources like the enterprise maintenance system and substation concentrators. The mobile agents would help create failure reports, monitor circuit breakers, and facilitate information sharing between the maintenance crew and databases. The approach provides advantages like automated information retrieval, report generation, and security while reducing maintenance costs and workload.
COPS: An Arresting Look at NEC Article 708
The document discusses an arresting look at NEC Article 708 which establishes requirements for critical operations power systems. It provides an overview of a webcast on the topic with multiple presenters discussing key aspects of Article 708 such as operational availability, how it relates to other NEC articles, and ensuring public acceptance. The presenters aim to provide takeaways on several learning objectives related to understanding and implementing Article 708.
Service solahart ciputat 081313462267
Service Solahart Ciputat Pemanas Air Solar Water Heater Tenaga Matahari Solahart ahli Dalam rangka untuk memastikan layanan terbaik dan saran, Solahart pemanas air tenaga surya dan sistem tenaga surya hanya tersedia melalui Expert Solahart lokal Anda. Dan dengan cakupan seluruh Australia ada satu tidak jauh dari Anda. Cari ahli terdekat Anda di sini. Semua ahli kami dilatih dan memenuhi syarat untuk menilai rumah Anda atau bisnis dan penggunaan energi Anda. Konsultasi surya GRATIS kami menjamin Anda mendapatkan solusi terbaik mutlak surya untuk situasi Anda. Buku gratis di rumah surya kutipan di sini. Tidak hanya installer sistem tenaga surya kita diakreditasi oleh Dewan Energi Bersih
Eaton 5s-ups-datasheet
The Eaton 5S UPS provides effective power protection, even in disturbed electrical environments. Voltage fluctuations are automatically corrected using an AVR device (booster/fader), without needing the batteries. We also providing Eaton Ups Supplies,Eaton Powerware Ups System,Eaton Powerware Ups.
International Journal of Engineering Research and Development
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Selecting Electric Motor Protection for Plant and Process Optimization
The document discusses selecting appropriate electric motor protection to optimize plant operations and prevent motor failures. It outlines various abnormal operating conditions that can cause motor failures like overloading, single phasing, stalling, and bearing failures. Modern electronic motor protection using techniques like thermal protection, single phasing protection, and ground fault protection can help increase productivity by minimizing unplanned downtime and avoiding costly motor repairs.
Regulatory Best Practices
The document discusses EMC compliance rules and regulations for electronic products. It covers various safety, energy efficiency, environmental and EMI/EMC standards that products must comply with for different regions. It emphasizes the importance of considering compliance early in the design process to incorporate necessary design features and allow for testing and modifications before final release. Regulations are constantly changing so keeping updated is important.
Ebox
Enercon is an Indonesian company that provides energy saving equipment for lighting systems. The equipment, called an E-Box, is an autotransformer with electronic control that allows for power savings of 15-35% on lighting. It has no moving parts, increases bulb life, protects equipment from power fluctuations, optimizes energy transmission, and improves power factor. The E-Box can be customized and installed easily.
Fuji BC Series MCB
Catalog thiết bị đóng cắt Fuji Electric - Fuji BC Series MCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
IRJET - Automated Monitoring Test Rig for Circuit Breaker Operation
1) The document describes an automated monitoring system for circuit breakers that records voltage, current, and switching time data.
2) The system uses a microprocessor, sensors, and wireless communication to acquire and transmit data from multiple circuit breakers to a central computer for analysis.
3) Analyzing circuit breaker operation data and the sequence of events during faults can help evaluate breaker performance, detect issues, and ensure the power system's topology and protection operate as intended.
IT (Floating) System
The document discusses the advantages of an IT power supply system compared to an earthed system. The IT system leaves the connection between the earth and the transformer star point disconnected. This provides several safety advantages, such as no fault current flowing if a live part is touched. It also allows for easier detection and location of insulation faults. While an IT system may have higher initial costs, the document argues that overall it provides economic advantages and is a better choice for power systems in most applications.
IRJET- Induction Motor Condition Monitoring and Controlling based on IoT
This document presents an Internet of Things (IoT)-based system for remote monitoring and controlling of induction motors used in industrial applications. Sensors are used to monitor parameters like temperature, vibration, voltage, current and RPM of the induction motor. An Arduino microcontroller collects data from the sensors and transmits it to the cloud for remote monitoring via a gateway module. The system allows automatic or manual start/stop control of the motor to prevent failures based on the monitored parameters. The objectives are to increase reliability of industrial motors through continuous monitoring and easy remote control capabilities. This provides benefits like preventative maintenance, reduced downtime, increased productivity and protection of expensive motor equipment.
CV
This document provides a summary of Jihad El Chebeir's background and employment history. It includes his date of birth, contact information, education history including a Bachelor's degree in Electrical Power Engineering from Beirut Arab University in 1993. It then outlines his employment history including roles as an Electrical Engineer and Technical Supervisor at Saudi Oger Ltd from 1997-2008 and his current role as Electrical Service Manager at King Abdullah University of Science and Technology since 2009 where he oversees around 150 employees and the maintenance of electrical systems on campus.
Luminous long backup 900 va
Are you looking for luminous long backup 900va at lowest price in Delhi-NCR. Get free installation and home delivery, call us now 9716628483 and visit on http://goo.gl/5NGn57
Protection Strategies for Microgrids
Abstract-- Microgrids are miniature versions of traditional grids.
They comprise of distributed energy resources like wind turbine, Photovoltaic, Storage devices like batteries and renewable resources of power systems. They can operate in two modes, viz. Connected mode, where they are connected to the Main grid; and island mode, where they are isolated from Main grid. While microgrids offer advantages like improved reliability, stability,and efficiency; their implementation poses different technical challenges specifically for protection of microgrid. It is essential to protect a micro grid in both the grid-connected and the island mode of operation against all different types of faults. This paper gives literature review for different challenges and protection of techniques for microgrid protection.
Understanding type 2 coordinated protection in motor branch circuit
This shows how to conform to the new standard using motor controls built to meet NEMA and IEC standards and related benefits associated with Type 2 coordination.
Power System Operation with Reduced System Strength for Inverter-connected Ge...
Power System Operation with Reduced System Strength for Inverter-connected Ge...Power System Operation
Large numbers of inverter-based generators in remote
parts of the network present unique challenges to system
operators in keeping sufficient system strength to
maintain system security. In the National Energy Market
(NEM) of Australia, there is an exponential growth in the
uptake of inverter-based generators (IBG), particularly
solar and wind generation. These generators are often
electrically close to each other and can adversely interact
under certain system conditions. The system strength
available in remote parts of the network is often low and
a planned outage of a network element can further reduce
the system strength available to these IBGs. This could
lead to unexpected and undesirable system responses.
This paper presents the impact of prior network outages
on the response of multiple electrically close IBGs in a remote part of the network, and discusses operational
measures taken to manage system security during these
prior outages while permitting maximum stable output
of these generators. Each IBG has been examined
individually and collectively to identify its contribution
to the undesired system behaviour. A number of system conditions have been simulated based on a detailed and
validated electromagnetic transient (EMT) model of the
entire region under consideration, to identify the impact of
prior outage of a network element on the overall dynamic
behaviour of the system and the impact on system security. Results discussed in this paper apply for prior outage
conditions only. While undesired voltage oscillations
have been observed more recently in a limited number
of cases under system normal conditions, these are not
discussed in this paper.Energy Prodution and D
This document outlines the plan of study for an Associate of Applied Science degree in Energy Production and Distribution. The two-year program includes courses in mechanical drive systems, electrical theory, industrial controls, national electrical codes, motors and transformers, programmable logic controllers, wind turbine construction, commissioning, operations, maintenance, troubleshooting, and electives in communications, social science, and humanities. Upon completion, students will earn industry endorsements in areas such as nacelle rescue, electrostatic discharge safety, forklift operation, OSHA training, rigging, first aid/CPR, and more.
Electric wiring and earthing
Electrical wiring connects electrical devices like switches, lights, and outlets through cables and is important for safety and power distribution. Proper wiring methods depend on factors like the building size and use, safety codes, and environment. Earthing electrically connects parts of an installation to the earth's surface through methods like wires, rods or plates to protect humans and equipment from electric shocks and overcurrent during faults. It aims to maintain safety, voltage stability, and protection from lightning. While earthing improves safety, it can increase system voltages during earth faults and make fault detection more complex.
Spam 20
This document is the user's manual for Sepam Series 20 protective relays. It provides instructions on the metering functions, protection functions, control and monitoring functions, and Modbus communication of the Sepam Series 20 relays. The manual contains sections on introduction, metering functions, protection functions, control and monitoring functions, Modbus communication, installation, and use of the relays.
Implementation of Structural Health Monitoring System for live monitoring of ...
This document discusses the implementation of a structural health monitoring system for a cable-stayed bridge in Barddhaman, India. The monitoring system measures forces on six critical bridge cables using electromagnetic sensors. It provides real-time data on cable forces and temperatures. The system was load tested and found to accurately monitor cable forces. It will allow engineers to safely monitor the bridge's structural integrity over its lifespan.
SunSaverDuo Dual Battery Solar Controller with Remote Meter
This controller charges two batteries simultaneously using solar power. It monitors and displays the status of each battery. Key features include charging both batteries based on user-selected priority, providing system information via an easy-to-read remote display, and protecting the batteries with temperature compensation and electronic protections. The controller reliably powers two batteries from solar energy.
9900 Presentation
The document summarizes Mitsubishi Electric's UPS systems, focusing on their technology and advantages over competitors. Key points include:
- Mitsubishi manufactures all major UPS components, including IGBT transistors, and has locations in the US.
- Their UPS systems have benefits like lower harmonics, optimized generator sizing, and maximized battery life without needing additional filters.
- Their 9900A series offers high efficiency, a small footprint, lightweight design, and reliability features like modular expandability and reactorless parallel operation.
M501 d datasheet_rev1.0_20050930
The document discusses a Standard Control Unit (SCU) that provides remote monitoring, configuration, status information, and control of a DC power plant's voltage, current, and alarm levels. The SCU can be upgraded to an Advanced Control Unit (ACU) through a simple swap, allowing for more extensive monitoring and control of auxiliary equipment on site. Benefits of the SCU/ACU include minimized installation time, high quality failure information, true hot plug installation, quick failure analysis, and extended battery life through advanced battery management.
More Related Content
What's hot
Eaton 5s-ups-datasheet
The Eaton 5S UPS provides effective power protection, even in disturbed electrical environments. Voltage fluctuations are automatically corrected using an AVR device (booster/fader), without needing the batteries. We also providing Eaton Ups Supplies,Eaton Powerware Ups System,Eaton Powerware Ups.
International Journal of Engineering Research and Development
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Selecting Electric Motor Protection for Plant and Process Optimization
The document discusses selecting appropriate electric motor protection to optimize plant operations and prevent motor failures. It outlines various abnormal operating conditions that can cause motor failures like overloading, single phasing, stalling, and bearing failures. Modern electronic motor protection using techniques like thermal protection, single phasing protection, and ground fault protection can help increase productivity by minimizing unplanned downtime and avoiding costly motor repairs.
Regulatory Best Practices
The document discusses EMC compliance rules and regulations for electronic products. It covers various safety, energy efficiency, environmental and EMI/EMC standards that products must comply with for different regions. It emphasizes the importance of considering compliance early in the design process to incorporate necessary design features and allow for testing and modifications before final release. Regulations are constantly changing so keeping updated is important.
Ebox
Enercon is an Indonesian company that provides energy saving equipment for lighting systems. The equipment, called an E-Box, is an autotransformer with electronic control that allows for power savings of 15-35% on lighting. It has no moving parts, increases bulb life, protects equipment from power fluctuations, optimizes energy transmission, and improves power factor. The E-Box can be customized and installed easily.
Fuji BC Series MCB
Catalog thiết bị đóng cắt Fuji Electric - Fuji BC Series MCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
IRJET - Automated Monitoring Test Rig for Circuit Breaker Operation
1) The document describes an automated monitoring system for circuit breakers that records voltage, current, and switching time data.
2) The system uses a microprocessor, sensors, and wireless communication to acquire and transmit data from multiple circuit breakers to a central computer for analysis.
3) Analyzing circuit breaker operation data and the sequence of events during faults can help evaluate breaker performance, detect issues, and ensure the power system's topology and protection operate as intended.
IT (Floating) System
The document discusses the advantages of an IT power supply system compared to an earthed system. The IT system leaves the connection between the earth and the transformer star point disconnected. This provides several safety advantages, such as no fault current flowing if a live part is touched. It also allows for easier detection and location of insulation faults. While an IT system may have higher initial costs, the document argues that overall it provides economic advantages and is a better choice for power systems in most applications.
IRJET- Induction Motor Condition Monitoring and Controlling based on IoT
This document presents an Internet of Things (IoT)-based system for remote monitoring and controlling of induction motors used in industrial applications. Sensors are used to monitor parameters like temperature, vibration, voltage, current and RPM of the induction motor. An Arduino microcontroller collects data from the sensors and transmits it to the cloud for remote monitoring via a gateway module. The system allows automatic or manual start/stop control of the motor to prevent failures based on the monitored parameters. The objectives are to increase reliability of industrial motors through continuous monitoring and easy remote control capabilities. This provides benefits like preventative maintenance, reduced downtime, increased productivity and protection of expensive motor equipment.
CV
This document provides a summary of Jihad El Chebeir's background and employment history. It includes his date of birth, contact information, education history including a Bachelor's degree in Electrical Power Engineering from Beirut Arab University in 1993. It then outlines his employment history including roles as an Electrical Engineer and Technical Supervisor at Saudi Oger Ltd from 1997-2008 and his current role as Electrical Service Manager at King Abdullah University of Science and Technology since 2009 where he oversees around 150 employees and the maintenance of electrical systems on campus.
Luminous long backup 900 va
Are you looking for luminous long backup 900va at lowest price in Delhi-NCR. Get free installation and home delivery, call us now 9716628483 and visit on http://goo.gl/5NGn57
Protection Strategies for Microgrids
Abstract-- Microgrids are miniature versions of traditional grids.
They comprise of distributed energy resources like wind turbine, Photovoltaic, Storage devices like batteries and renewable resources of power systems. They can operate in two modes, viz. Connected mode, where they are connected to the Main grid; and island mode, where they are isolated from Main grid. While microgrids offer advantages like improved reliability, stability,and efficiency; their implementation poses different technical challenges specifically for protection of microgrid. It is essential to protect a micro grid in both the grid-connected and the island mode of operation against all different types of faults. This paper gives literature review for different challenges and protection of techniques for microgrid protection.
Understanding type 2 coordinated protection in motor branch circuit
This shows how to conform to the new standard using motor controls built to meet NEMA and IEC standards and related benefits associated with Type 2 coordination.
Power System Operation with Reduced System Strength for Inverter-connected Ge...
Power System Operation with Reduced System Strength for Inverter-connected Ge...Power System Operation
Large numbers of inverter-based generators in remote
parts of the network present unique challenges to system
operators in keeping sufficient system strength to
maintain system security. In the National Energy Market
(NEM) of Australia, there is an exponential growth in the
uptake of inverter-based generators (IBG), particularly
solar and wind generation. These generators are often
electrically close to each other and can adversely interact
under certain system conditions. The system strength
available in remote parts of the network is often low and
a planned outage of a network element can further reduce
the system strength available to these IBGs. This could
lead to unexpected and undesirable system responses.
This paper presents the impact of prior network outages
on the response of multiple electrically close IBGs in a remote part of the network, and discusses operational
measures taken to manage system security during these
prior outages while permitting maximum stable output
of these generators. Each IBG has been examined
individually and collectively to identify its contribution
to the undesired system behaviour. A number of system conditions have been simulated based on a detailed and
validated electromagnetic transient (EMT) model of the
entire region under consideration, to identify the impact of
prior outage of a network element on the overall dynamic
behaviour of the system and the impact on system security. Results discussed in this paper apply for prior outage
conditions only. While undesired voltage oscillations
have been observed more recently in a limited number
of cases under system normal conditions, these are not
discussed in this paper.Energy Prodution and D
This document outlines the plan of study for an Associate of Applied Science degree in Energy Production and Distribution. The two-year program includes courses in mechanical drive systems, electrical theory, industrial controls, national electrical codes, motors and transformers, programmable logic controllers, wind turbine construction, commissioning, operations, maintenance, troubleshooting, and electives in communications, social science, and humanities. Upon completion, students will earn industry endorsements in areas such as nacelle rescue, electrostatic discharge safety, forklift operation, OSHA training, rigging, first aid/CPR, and more.
Electric wiring and earthing
Electrical wiring connects electrical devices like switches, lights, and outlets through cables and is important for safety and power distribution. Proper wiring methods depend on factors like the building size and use, safety codes, and environment. Earthing electrically connects parts of an installation to the earth's surface through methods like wires, rods or plates to protect humans and equipment from electric shocks and overcurrent during faults. It aims to maintain safety, voltage stability, and protection from lightning. While earthing improves safety, it can increase system voltages during earth faults and make fault detection more complex.
Spam 20
This document is the user's manual for Sepam Series 20 protective relays. It provides instructions on the metering functions, protection functions, control and monitoring functions, and Modbus communication of the Sepam Series 20 relays. The manual contains sections on introduction, metering functions, protection functions, control and monitoring functions, Modbus communication, installation, and use of the relays.
Implementation of Structural Health Monitoring System for live monitoring of ...
This document discusses the implementation of a structural health monitoring system for a cable-stayed bridge in Barddhaman, India. The monitoring system measures forces on six critical bridge cables using electromagnetic sensors. It provides real-time data on cable forces and temperatures. The system was load tested and found to accurately monitor cable forces. It will allow engineers to safely monitor the bridge's structural integrity over its lifespan.
SunSaverDuo Dual Battery Solar Controller with Remote Meter
This controller charges two batteries simultaneously using solar power. It monitors and displays the status of each battery. Key features include charging both batteries based on user-selected priority, providing system information via an easy-to-read remote display, and protecting the batteries with temperature compensation and electronic protections. The controller reliably powers two batteries from solar energy.
9900 Presentation
The document summarizes Mitsubishi Electric's UPS systems, focusing on their technology and advantages over competitors. Key points include:
- Mitsubishi manufactures all major UPS components, including IGBT transistors, and has locations in the US.
- Their UPS systems have benefits like lower harmonics, optimized generator sizing, and maximized battery life without needing additional filters.
- Their 9900A series offers high efficiency, a small footprint, lightweight design, and reliability features like modular expandability and reactorless parallel operation.
What's hot (20)
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
Selecting Electric Motor Protection for Plant and Process Optimization
Selecting Electric Motor Protection for Plant and Process Optimization
IRJET - Automated Monitoring Test Rig for Circuit Breaker Operation
IRJET - Automated Monitoring Test Rig for Circuit Breaker Operation
IRJET- Induction Motor Condition Monitoring and Controlling based on IoT
IRJET- Induction Motor Condition Monitoring and Controlling based on IoT
Understanding type 2 coordinated protection in motor branch circuit
Understanding type 2 coordinated protection in motor branch circuit
Power System Operation with Reduced System Strength for Inverter-connected Ge...
Power System Operation with Reduced System Strength for Inverter-connected Ge...
Implementation of Structural Health Monitoring System for live monitoring of ...
Implementation of Structural Health Monitoring System for live monitoring of ...
SunSaverDuo Dual Battery Solar Controller with Remote Meter
SunSaverDuo Dual Battery Solar Controller with Remote Meter
Viewers also liked
M501 d datasheet_rev1.0_20050930
The document discusses a Standard Control Unit (SCU) that provides remote monitoring, configuration, status information, and control of a DC power plant's voltage, current, and alarm levels. The SCU can be upgraded to an Advanced Control Unit (ACU) through a simple swap, allowing for more extensive monitoring and control of auxiliary equipment on site. Benefits of the SCU/ACU include minimized installation time, high quality failure information, true hot plug installation, quick failure analysis, and extended battery life through advanced battery management.
Siae datasheet
The document describes the ALS series of IP/PDH/SDH microwave radio systems. Key points:
- The ALS series provides native IP, PDH and SDH connectivity and is suitable for a wide range of network applications, from cost-sensitive to high-capacity backbone networks.
- It supports flexible interfaces including E1, Ethernet, and STM-1, and can evolve from pure TDM to pure IP networks.
- Nodal configurations allow connecting multiple hops in crowded stations simply and reduce equipment complexity.
Nokia siemens-networks-flexi-multiradio-base-station-data-sheet
The document describes the Flexi 3-sector RF module from Nokia Siemens Networks, which offers a multi-standard base station featuring GSM/EDGE, WCDMA/HSPA, and LTE technologies in a single hardware platform. It supports software upgrades between the different technologies and aims to improve efficiency, boost performance, and reduce costs for network operators. The Flexi module provides high capacity and integration density in a compact form factor.
Arp config-arp
The Address Resolution Protocol (ARP) resolves IP addresses to MAC addresses to allow communication between hosts on a local area network (LAN). ARP maintains a cache that maps IP addresses to MAC addresses. Static and dynamic entries are stored in the ARP cache, with dynamic entries expiring after a timeout period. Proxy ARP and other protocols like Reverse ARP and Serial Line ARP provide additional ARP functionality in certain network configurations.
5432 cellular network
Mobile networks use radio frequencies to allow cellular devices to connect to a network of base stations. Base stations transmit and receive signals in frequency bands between 850-1900 MHz. As devices move between base station coverage areas, the network performs handoffs to transfer the connection seamlessly. Higher generations of cellular networks like 3G and 4G provide improved data speeds but still must handle user mobility effectively.
Physical layer aggregation
This document discusses physical layer aggregation to provide scalable bandwidth and resilience. It proposes applying the concepts of 802.3ah PME aggregation at the physical layer of existing 10GBASE PHYs. Packet fragmentation, distribution across multiple PHYs, and reassembly could increase bandwidth utilization compared to link aggregation above the MAC. Variable size fragmentation is most efficient. A control protocol would be needed to configure aggregations. Examples show default and reconfigured configurations using multiple 10GBASE-R PHYs aggregated to provide higher speeds. The approach could be used with various PHY types including multi-wavelength PHYs.
Unix introduction
This document provides an introduction to Unix including:
- An overview of the Unix operating system structure including the kernel, system calls, and how programs interact with the kernel.
- A description of the Unix file system structure as an inverted tree with directories and files represented as nodes.
- An explanation of Unix directories, files, and inodes, which contain metadata about each file.
- A brief definition of Unix programs as executable shell files, built-in shell commands, or compiled object code files.
Ipmu ic procedure
This document provides installation and commissioning instructions for an Integrated Power Management Unit (IPMU). The IPMU integrates a switch mode power supply and power management unit to provide power from the mains or generator to critical loads like a battery bank and BTS equipment. The summary includes:
1. The IPMU receives power from the mains or generator, regulates the voltage with transformers, and provides power to rectifier modules and battery bank.
2. Commissioning involves checking voltages and connections between the IPMU, generator, battery bank, and critical loads. Alarms are also connected from the IPMU and switch mode power supply to alert operators.
3. Detailed wiring diagrams and instructions are provided
Lte optimization
This document provides guidelines for LTE radio frequency (RF) network optimization. It describes the network optimization process including single site verification and RF optimization. Key aspects of RF optimization covered include preparing for optimization by collecting data, analyzing problems related to coverage, signal quality and handover success rate, and adjusting parameters like transmit power, antenna tilts and neighboring cell configurations. Common issues addressed are weak coverage, coverage holes, lack of a dominant cell, and cross coverage between cells. Optimization methods and specific cases are presented to resolve different problems.
Uim48701z r2
This document provides installation and setup instructions for the ACTURA 48 701z power system. It includes descriptions of the power system components, sub-assemblies, and system controller. Installation instructions are provided for unpacking, mounting, making AC and DC connections, installing batteries, and setting up communication. Technical specifications for the power system and its rectifier modules are also included in an annex.
Unix t2
This document provides an intermediate-level practical guide to using Unix. It covers topics such as redirecting standard input/output to files, filename substitution using wildcards, using shell variables, command substitution, and writing simple shell scripts. Examples are provided to illustrate how to use commands like date, ls, and echo to manipulate files and data. Shell programming concepts like conditional expressions and foreach loops are demonstrated in short scripts.
Unix w
This document provides an introduction to Unix for computer science students at Old Dominion University. It discusses the history and evolution of operating systems like Unix and how they differ from Windows. Specifically, it explains that Unix was designed for multiprogramming and multiprocessing environments using terminals for input/output when networking and remote access were common. In contrast, Windows emerged later for standalone personal computers with graphics interfaces. The document aims to help students understand why the CS department uses Unix and the fundamental design of the Unix operating system.
Viewers also liked (14)
Nokia siemens-networks-flexi-multiradio-base-station-data-sheet
Nokia siemens-networks-flexi-multiradio-base-station-data-sheet
Similar to Sm bat datasheet_rev1.0_20050511
CE Power NERC Compliance
The document discusses NERC standards and consulting services related to reliability standards. It provides descriptions of several NERC reliability standards including PRC-001, PRC-002, PRC-005, PRC-006, and PRC-019. For each standard, it lists the standard description, applicable entities, required information, and enforcement date. It also lists several NERC standards that NERC Consulting can assist clients with and provides an overview of key requirements of standard PRC-005-2.
protectionsettings-120425102109-phpapp01.ppt
The document discusses power system protection settings. It describes the functions of protective relays and equipment protection, and the information required to calculate protection settings. The protection settings process involves calculating settings, checking them, and implementing them. Protective relays use functional elements like protection, control, and timing elements. Distance, overcurrent, and directional protection elements are described.
protectionsettings-120425102109-phpapp01.ppt
The document discusses power system protection settings. It describes the functions of protective relays and equipment protection, and the information required to calculate protection settings. The protection settings process involves calculating settings, checking them, and implementing them. Protective relays use functional elements, and have operating characteristics like overcurrent, directional, and distance protection. Settings must coordinate protection across the system.
Communication eng.pptx
Fast-growing network demands and miniaturization of electronics are increasing the risk of overvoltage in communication systems. Overvoltage can be caused by lightning strikes, electromagnetic interference, and static charges from seemingly harmless discharges, and can damage equipment, cause network faults and financial losses. It is more cost effective to install overvoltage protection devices adapted to the system's requirements than to replace damaged equipment.
Development of Power train in Electric Vehicles.
The document discusses the development of power trains in electric vehicles. It describes some key components of an electric vehicle power train including electric motors, battery packs, battery management systems, and battery charging systems. Specifically, it provides details on permanent magnet synchronous motors, lithium-ion battery cells, centralized and decentralized battery management system architectures, and levels 1-3 charging systems. The goal of the research is to improve electric vehicle power trains and components like batteries and motors to increase their efficiency and performance.
IRJET- Wireless Charging of Electric Vehicles
This document summarizes research on wireless charging of electric vehicles. It discusses both stationary and dynamic wireless charging systems. For stationary systems, charging pads are installed in parking lots, garages, etc. and electric vehicles charge when parked over the pad. Dynamic wireless charging allows electric vehicles to charge while in motion by transmitting power through roadway coils to vehicle coils. Challenges include coil alignment, power transfer efficiency, and safety regulations. The document outlines applications of both static and dynamic wireless charging systems to promote electric vehicle use and reduce fuel consumption and emissions.
Ac load bank
JUNXY's key power solutions for your standby power system, product ranges include: battery load bank, battery resistance & conductance tester, battery charger, battery regenerator for single cell and string, battery monitoring system, battery manageme"
Catalog biến tần Inovance MD310 - HPC
The document is a user guide for the MD310 AC drive from Shenzhen Inovance Technology Co., Ltd. It provides information on product specifications, wiring, setup, troubleshooting, and parameters. The guide covers safety precautions, nameplate details, terminal descriptions, typical wiring diagrams, easy setup instructions, fault solutions, and tables of general and monitoring parameters.
Power System Protection
This document discusses power system protection settings. It begins by introducing the functions of protective relays and the information needed to calculate settings, such as line parameters, transformer parameters, fault studies results, and CT and VT ratios. It then describes the protection settings process and functional elements of protective relays. The document discusses the operating characteristics of overcurrent, directional, and distance protection elements. It explains concepts like current grading, time grading, and directional elements as they relate to achieving selectivity in protection schemes. Finally, it provides more details on distance protection principles and operating characteristics.
Electric vehicle and charging infra by link vue system
We are now realize Clean Air (Oxygen) is very important for each breath to ensure life of earth.
Like Other Industries releasing Pollution and Carbon due to production but for Transportation may be we can stop these Pollution by using Electric Vehicle on Road.
But the same time we have to understand and ready to build infra for Additional Power in Demand for Charging of these Vehicles.
It will be only possible when we develop power in Local Integrate with Battery Energy Storage and Supply Clean Power and Untrip Power to full demand of Power for Vehicle Charging Infra.
Industry has to select Connector both side from Vehicle and Vehicle Charging should be same .
Link Vue System is professional Company Supporting Technical and Product Demand as trade or Installation Partner .
We invite to join us for Nation Agenda to reduce Carbon in Air and Increase of Oxygen in AIR.
We Offer Electrical Safety Earthing&Surge Protection ,Cable and Connectors (up to400Amps IP 68 )for Electric Vehicle , Networking Lan ,Fiber and Wireless,Automation &Connectivity of Building Commination connectivity up to distribution Substation .
We Request to Electric Vehicle&Battery Manufacturer, Vehicle Charging OEM, Installation Partner , Power Plant Solar Roof Top ,High Energy Batter Storage to Contact us
Ultisolar VS2048BN-VS3048BN-VS4548BN-VS6048BN User Manual
Ultisolar VS2048BN-VS3048BN-VS4548BN-VS6048BN User ManualShandong iSentrol Electronic Technology Co., Ltd
Ultisolar VS2048BN-VS3048BN-VS4548BN-VS6048BN User Manual
Available at http://shop.ultisolar.com
-Ultisolar New Energy Co., Ltd
SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers Ultisolar VS1024BN-VS2024BN-VS3024BN-VS4524BN-VS6024BN User Manual
Ultisolar VS1024BN-VS2024BN-VS3024BN-VS4524BN-VS6024BN User ManualShandong iSentrol Electronic Technology Co., Ltd
Ultisolar VS1024BN-VS2024BN-VS3024BN-VS4524BN-VS6024BN User Manual
Available at http://shop.ultisolar.com
-Ultisolar New Energy Co., Ltd
SWH Controllers||SWH Pump Stations||MPPT/PWM Solar Controllers||Flow Meter||Hall Flow Sensors||Heat Exchangers Ipsa mv relay co-ordiantion shaik adam
This document discusses relay coordination and overcurrent protection. It begins with an introduction to relay coordination, covering the basic philosophy of selectivity, sensitivity and speed. It then discusses the need for protection coordination to ensure equipment safety, proper discrimination of faulty vs healthy portions of the power system, and reduced outage times. The document outlines various protection schemes including unit and non-unit schemes. It also covers overcurrent protection characteristics such as time-overcurrent, definite time, and instantaneous and provides examples of how relay trip times are calculated based on standards.
003 pms wind turbine data sheet
The document discusses an integrated power management system from Spectrum Communications that provides remote management of power sources for mobile telecom sites. The system allows sites to operate independently from generators through the use of wind turbines, solar panels, batteries, and power controllers. It saves on operational costs by efficiently utilizing these power sources and remotely controlling equipment. The graphical user interface allows for easy local and remote configuration and monitoring of all system components and power levels.
UPS Electrical Design and Installation
UPS Electrical Design and Installation by Critical Power Supplies.
Important considerations for the electrical design and installation of UPS systems in mission critical applications.
Where Critical Power applications are concerned, the electrical design and installation of a UPS (uninterruptible power supply) system is crucially important for several reasons.
Firstly, it must work in alignment with installations already on site and not interfere with other electrical
equipment. This is particularly important for industrial and healthcare installations where there may already
be critical equipment (medical and life support, for example) in operation.
It all starts with a site survey.
A pre-installation site survey will reveal details about the scope of the electrical work to be undertaken.
Such information will reveal, for instance, the type of electrical loads, power quality issues, harmonics, whether it is a
high, medium or low voltage installation and electrical distribution set up, including the breaker sizes already on site
and their discrimination.
If you would like more information please contact sales on 0800 978 8988 or email sales@criticalpowersupplies.co.uk
Catalog biến tần Inovance MD200
Beeteco xin gửi đến quý khách hàng Catalog biến tần Inovance dòng MD200 với đầy đủ thông tin về sản phẩm, kích thước, những lưu ý để sử dụng thiết bị hiệu quả.
Biến tần Inovance là dòng sản phẩm đa năng rất dễ sử dụng và đem lại hiệu quả cho việc điều khiển tốc độ động cơ và các ứng dụng đặc biệt khác. Biến tần Inovance MD200 dùng cho các ứng dụng: điều khiển băng tải, bơm chân không kiểu piston, vận chuyển vật liệu, cắt, máy chế biến gỗ,...
Thông tin liên hệ:
Trụ sở TP.HCM: Số 139-141 đường Phú Châu, Kp. 1, P. Tam Bình, Q. Thủ Đức, Tp. Hồ Chí Minh
Tel: (028) 3636 5671|2|3 - Fax: (028) 3636 5674
Trụ sở Hà Nội: P502 tầng 5, tòa VP số 15 ngõ 2, Phố Thọ Tháp, P. Dịch Vọng, Q. Cầu Giấy, Hà Nội
Tel: (024) 320 11 408 | 320 11 410
Email: contact@beeteco.com - MST: 3702357207
Bite3
The document describes the BITE 3 Battery Impedance Test Equipment, which determines the health of lead-acid battery cells up to 2000 Ah. It does so by measuring cell impedance, voltage, intercell connection resistance, and ripple current. The BITE 3 interfaces with ProActiv database management software to organize and analyze battery test data. Together, the BITE 3 and ProActiv provide battery testing, data analysis, and health monitoring in a quick and easy-to-use system.
Power system Protection Services in India
Power system protection services in India. We provide one stop solution in electrical power system protection and control.
Wsp data center e
Significant reduction in data center operating costs of 38%. Traditional battery-based uninterruptible power supplies, or UPS backup systems, are designed to keep computers up during blackouts. They are not designed to protect against the power “events” that can wreak havoc with your data in a matter of milliseconds.
The UPS may try valiantly, but wear due to excessive switching, batteries that fall out of spec, or simple lack of sensitivity will almost inevitably cause it to fail, right when it’s needed the most. UST manufactures a full line of industrial-grade power conditioners - electronic voltage regulators (EVR) with patented microprocessor-controlled tap switching technology - that offer far more reliable power protection than batterybased UPS systems.
When you place a UST power conditioner between the grid and your critical equipment, you can be assured that common electrical anomalies, of any intensity or duration, will be stopped and corrected within a single cycle.
Vishnu CV New
This document contains the resume of Vishnu T S, an electrical engineer with experience in power transmission and distribution systems. He has a Bachelor's degree in Electrical and Electronics Engineering with excellent academic performance, as well as a postgraduate diploma in Industrial Automation. His professional experience includes over a year working as a substation operation and maintenance engineer for the Kerala State Electricity Board, where he performed tasks like equipment installation, testing, troubleshooting, and maintenance. He also completed an academic project on transformer health monitoring in intelligent substations. Vishnu has strong computer skills including AutoCAD Electrical and programming languages, and seeks to further his career as an electrical engineer.
Similar to Sm bat datasheet_rev1.0_20050511 (20)
Electric vehicle and charging infra by link vue system
Electric vehicle and charging infra by link vue system
Ultisolar VS2048BN-VS3048BN-VS4548BN-VS6048BN User Manual
Ultisolar VS2048BN-VS3048BN-VS4548BN-VS6048BN User Manual
Ultisolar VS1024BN-VS2024BN-VS3024BN-VS4524BN-VS6024BN User Manual
Ultisolar VS1024BN-VS2024BN-VS3024BN-VS4524BN-VS6024BN User Manual
Recently uploaded
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Recently uploaded (20)
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Sm bat datasheet_rev1.0_20050511
- 1. SM BAT – EnergyMasterTM DC Power System Monitoring Supervision Module for Battery Backup The Supervision Module for Batteries provides detailed information and alarms regarding the condition and status of the Telecom sites’s battery backup. When maintenance and site visits related to the battery backup are based upon this information they can be optimized to save both time and money, especially for sites located remotely. The SM BAT is an easily installed monitoring device connected to the integrated control unit (ACU1 ) of the DC power system, and the battery backup it supervises. It is designed for measuring cell/block voltages, battery current, and battery temperature. The information and alarms, regarding the battery backup on a specific site, can be monitored or checked by means of a simple web browser or specific management SW2 . No additional software is needed and login to monitor the site is password protected. (Examples of alarms provided by means of the control unit of the power system is specified in the datasheet and/or manual for the specific unit.) Benefits • Lower maintenance cost related to battery backup • Higher availability thanks to automated battery backup test and detailed information and alarms from the battery backup 1 ACU = Advanced Control Unit 2 EMAS, EXMG and PSMS are management softwares from Emerson Network Power
- 2. EN/LZT145 237 RA © Emerson Network Power Energy Systems 2005 System Layout Emerson Network Power Energy Systems AB SE-141 82 Stockholm, Sweden Phone: +4687216000 Fax: +4687217177 www.emersonenergy.com Emerson Network Power Energy Systems, North America 1122 ”F” Street, Lorain, OH 44052 Phone: 440-246-6999 Fax: 440-246-4876 www.emersonnetworkpower.com/energysystems/ Emerson Network Power Co Ltd., China No. 1 Kefa Rd., Science & Industry Park Nanshan District 518057, Shenzhen, China Phone: 86-755-860 108 08 www.emersonnetworkpower.com.cn ©Production:EmersonEnergySystems,Communications.TheEmersonlogoisatrademarkandservicemarkofEmersonElectricCo.Subjecttochangewithoutnotice. Technical Specifications, SM BAT General Power Supply 18-60 VDC Power Consumption 5W Temperature Range 0°C to +60°C / 32°F to +140°F EMC EN 300 386:2001 class B, FCC part 15 class B Safety IEC 60950, EN 60950, UL 60950 Approvals CE, UL and NEBS level 3 Mechanical Data Dimensions (H x W x D) 150 x 300 x 43 mm / 5.9 x 11.8 x 1.7 inch Standard Installation Methods Rack and wall mounted Weight < 2 kg / 4.4 lbs Inputs/Outputs External Communication RS232 Digital Inputs: 8 Digital Inputs Alarms/events Analog Inputs: 25 Analog Inputs 0-14.5 V < 0.5% for cell/block voltages 1 Analog Input 0-75 V < 0.5% for total battery voltage 4 Analog Inputs 0-10 V < 0.5%, 0-20mA < 0.5%, 0-100mV < 1%, 1uA/K <2% configurable Digital Outputs: 2 Relay Outputs 60VDC 2A, 24VDC 5A ABBREVIATIONS PSTN Public Switched Telephony Network, a ordinary telephone line IE Internet Explorer EXMG EnergyMasterTM exchange Manager, Windows based software for monitoring of Emerson Network Power DC equipment. EMAS EnergyMasterTM Management Application Software, Unix based software for monitoring of Emerson Network Power DC equipment. PSMS Power Supply and environment Monitoring System SCU Standard Control Unit ACU Advanced Control Unit PSU Power Supply Unit (AC/DC converter/rectifier) LC Local Computer, Used for additional alarms in extension cabinets SM AC Supervision Module for Alternating Current SM BAT Supervision Module for Battery Backup SM IO Supervision Module for generic monitoring