Solar paint has been developed and dramatically simplifies the preparation procedures for nanocrystalline solar cells.
Visit our website, KamatLab.com, for the latest news, publications, and research from our group.
PHOTOCATALYTIC DEGRADATION OF RB21 DYE BY TIO2 AND ZNO UNDER NATURAL SUNLIGHT...IAEME Publication
The present work aims to degrade the RB21 dye from synthetic wastewater using
semiconductors TiO2 and ZnO. The activity of photocatalytic degradation process of dye was
carried out using different light sources of 900 W/m
2
intensity in natural sunlight from 02:00 to
04:00 pm with 48°C temperature in Ahmedabad city in the month of May, 600 Watt microwave
oven and high pressure UV-light photocatalytic reactor of wavelength 200-450 nm. All the
experiments were performed with dye concentration 50 mg/L, catalyst dosage 0.8 g, pH 7, room
temperature, irradiation time 240 min followed by 30 min in dark. All the samples were collected at
different time intervals of 30, 60, 90, 120, 150, 180, 210, 240 min for the analysis of COD
degradation and color removal. The best performances was achieved using high pressure UVphotocatalytic
reactor using TiO2. The successful result obtained using TiO2is 80% COD
degradation and 99% color removal followed by 75% COD and 99% color removal with ZnO.
Chemical kinetics was found to follow first order mechanism. The formation of intermediate
compounds and identification of the final products were carried out using LCMS/MS analysis and
FT-IR techniques.
The threat of global warming is high due to the extensive use of fossil fuels.Using non-renewable resources is a viable solution. Sunlight can be converted in two ways - into electrical energy and into chemical energy. Water splitting and CO2 are two important methods which can be used in solar cells.
PHOTOCATALYTIC DEGRADATION OF RB21 DYE BY TIO2 AND ZNO UNDER NATURAL SUNLIGHT...IAEME Publication
The present work aims to degrade the RB21 dye from synthetic wastewater using
semiconductors TiO2 and ZnO. The activity of photocatalytic degradation process of dye was
carried out using different light sources of 900 W/m
2
intensity in natural sunlight from 02:00 to
04:00 pm with 48°C temperature in Ahmedabad city in the month of May, 600 Watt microwave
oven and high pressure UV-light photocatalytic reactor of wavelength 200-450 nm. All the
experiments were performed with dye concentration 50 mg/L, catalyst dosage 0.8 g, pH 7, room
temperature, irradiation time 240 min followed by 30 min in dark. All the samples were collected at
different time intervals of 30, 60, 90, 120, 150, 180, 210, 240 min for the analysis of COD
degradation and color removal. The best performances was achieved using high pressure UVphotocatalytic
reactor using TiO2. The successful result obtained using TiO2is 80% COD
degradation and 99% color removal followed by 75% COD and 99% color removal with ZnO.
Chemical kinetics was found to follow first order mechanism. The formation of intermediate
compounds and identification of the final products were carried out using LCMS/MS analysis and
FT-IR techniques.
The threat of global warming is high due to the extensive use of fossil fuels.Using non-renewable resources is a viable solution. Sunlight can be converted in two ways - into electrical energy and into chemical energy. Water splitting and CO2 are two important methods which can be used in solar cells.
Paints and lacquers: Coatings have dual uses of protecting the substrate and being decorative. (The paint on large industrial pipes is presumably only for the function of preventing corrosion).
MOF is a new class of material with lots of opportunity for future work. It is a coordination compound. Obviously MOF is a attractive subject for a group of researcher.
Paints and lacquers: Coatings have dual uses of protecting the substrate and being decorative. (The paint on large industrial pipes is presumably only for the function of preventing corrosion).
MOF is a new class of material with lots of opportunity for future work. It is a coordination compound. Obviously MOF is a attractive subject for a group of researcher.
Chemistry word can be represented as C for chemistry, H for health, E for environment, M for medicines, I for industries, S for sciences, T for teaching, R for research and Y for you.
we are a living chemistry as we are made of chemicals only and there are a lot of chemical reactions going in our body.
Rate limiting interfacial hole transfer in Sb2S3 solid state solar cellskamatlab
view article: http://dx.doi.org/10.1039/C3EE43844A
Solid-state sensitized solar cells (SSCs) utilizing semiconductor absorbers overcome the issues of leakage and evaporation encountered in liquid-junction SSCs, and offer the potential for efficient, low cost photovoltaics. For widespread commercialization these solar cells require higher power conversion efficiency than is currently obtained with state-of-the-art devices. One critical component to this is the efficient extraction of photogenerated charges from the semiconductor absorber material. In this study, we decouple the two steps of hole transfer in the Sb2S3/CuSCN system: diffusion of holes in the Sb2S3 absorber layer, and transfer of these holes across Sb2S3–CuSCN interface. We find that interfacial transfer is the major limiting step in the thin (< 20 nm) Sb2S3 films used for high efficiency Sb2S3 photovoltaics. Decoupling of diffusion and interfacial transfer leads to a deeper understanding of the mechanism of hole transfer. This information has implications for the future design of semiconductor-based SSCs as it points to an important, often neglected interface, the absorber-hole conductor interface, which can play an important role in charge extraction.
Trap and Transfer. Two-Step Hole Injection Across the Sb2S3/CuSCN Interface i...kamatlab
Trap and Transfer. Two-Step Hole Injection Across the Sb2S3/CuSCN Interface in Solid State Solar Cells. ACS Nano, 2013, ASAP.
DOI: 10.1021/nn403058f
In solid-state semiconductor-sensitized solar cells, commonly known as extremely thin absorber (ETA) or solid-state quantum dot sensitized solar cells (QDSCs), transfer of photogenerated holes from the absorber species to the p-type hole conductor plays a critical role in the charge separation process. Using Sb2S3 (absorber) and CuSCN (hole conductor), we have constructed ETA solar cells exhibiting a power conversion efficiency of 3.3%. The hole transfer from excited Sb2S3 into CuSCN, which limits the overall power conversion efficiency of these solar cells, is now independently studied using transient absorption spectroscopy. In the Sb2S3 absorber layer, photogenerated holes are rapidly localized on the sulfur atoms of the crystal lattice, forming a sulfide radical (S−•) species. This trapped hole is transferred from the Sb2S3 absorber to the CuSCN hole conductor with an exponential time constant of 1680 ps. This process was monitored through the spectroscopic signal seen for the S−• species in Sb2S3, providing direct evidence for the hole transfer dynamics in ETA solar cells. Elucidation of the hole transfer mechanism from Sb2S3 to CuSCN represents a significant step toward understanding charge separation in Sb2S3 solar cells, and provides insight into the design of new architectures for higher efficiency devices.
Professor Prashant Kamat presents how solar energy can meet our future energy demand in his ND Thinks Big talk.
Sponsored by The Hub and CUSE, ND Thinks Big features 10 of Notre Dame’s most exciting and engaging professors sharing the impact of their work in action-packed, accessible 10 minute talks.
Visit our website, KamatLab.com, for the latest news, publications, and research from our group.
This talk is on some of the basics of making proper solar cell efficiency measurements and deriving correct information from 2 and 3 electrode measurements.
Visit our website at KamatLab.com for the latest news, publications, and research from our group.
Electron transfer between methyl viologen radicals and graphene oxidekamatlab
Methyl viologen radicals are capable of transferring electrons to graphene oxide and partially restore the sp2 network. The reduced graphene oxide serves as a scaffold to anchor Ag nanoparticles. The growth of these silver nanoparticles is dictated by the ability of RGO to store and shuttle electrons. The RGO/Ag nanocomposites discussed in the present work offer new opportunities to design next generation photocatalysts.
Visit our website, KamatLab.com, for the latest news, publications, and research from our group.
Adsorption and Electron Injection for CdSe on TiO2kamatlab
This presentation is based on the recent publication from our group entitled, "Tracking the Adsorption and Electron Injection Rates of CdSe Quantum Dots on TiO2: Linked versus Direct Attachment," published in 2011 in the Journal of Physical Chemistry C. Presented by Doug Pernik, an undergraduate in the Kamat lab.
Figures in this presentation are reprinted with permission from J. Phys. Chem. C, 2011, 115, 13511-13519. Copyright 2011 American Chemical Society.
Visit our website, KamatLab.com, for the latest news, publications, and research from our group.
The Role of IrO2 in Mediating Hole Transfer at the TiO2 Interfacekamatlab
A presentation of key information from our recently published paper:
DOI: 10.1021/jz200852m
Visit our website, KamatLab.com, for the latest news, publications, and research from our group.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdfPeter Spielvogel
Building better applications for business users with SAP Fiori.
• What is SAP Fiori and why it matters to you
• How a better user experience drives measurable business benefits
• How to get started with SAP Fiori today
• How SAP Fiori elements accelerates application development
• How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities
• How SAP Fiori paves the way for using AI in SAP apps
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Welocme to ViralQR, your best QR code generator.ViralQR
Welcome to ViralQR, your best QR code generator available on the market!
At ViralQR, we design static and dynamic QR codes. Our mission is to make business operations easier and customer engagement more powerful through the use of QR technology. Be it a small-scale business or a huge enterprise, our easy-to-use platform provides multiple choices that can be tailored according to your company's branding and marketing strategies.
Our Vision
We are here to make the process of creating QR codes easy and smooth, thus enhancing customer interaction and making business more fluid. We very strongly believe in the ability of QR codes to change the world for businesses in their interaction with customers and are set on making that technology accessible and usable far and wide.
Our Achievements
Ever since its inception, we have successfully served many clients by offering QR codes in their marketing, service delivery, and collection of feedback across various industries. Our platform has been recognized for its ease of use and amazing features, which helped a business to make QR codes.
Our Services
At ViralQR, here is a comprehensive suite of services that caters to your very needs:
Static QR Codes: Create free static QR codes. These QR codes are able to store significant information such as URLs, vCards, plain text, emails and SMS, Wi-Fi credentials, and Bitcoin addresses.
Dynamic QR codes: These also have all the advanced features but are subscription-based. They can directly link to PDF files, images, micro-landing pages, social accounts, review forms, business pages, and applications. In addition, they can be branded with CTAs, frames, patterns, colors, and logos to enhance your branding.
Pricing and Packages
Additionally, there is a 14-day free offer to ViralQR, which is an exceptional opportunity for new users to take a feel of this platform. One can easily subscribe from there and experience the full dynamic of using QR codes. The subscription plans are not only meant for business; they are priced very flexibly so that literally every business could afford to benefit from our service.
Why choose us?
ViralQR will provide services for marketing, advertising, catering, retail, and the like. The QR codes can be posted on fliers, packaging, merchandise, and banners, as well as to substitute for cash and cards in a restaurant or coffee shop. With QR codes integrated into your business, improve customer engagement and streamline operations.
Comprehensive Analytics
Subscribers of ViralQR receive detailed analytics and tracking tools in light of having a view of the core values of QR code performance. Our analytics dashboard shows aggregate views and unique views, as well as detailed information about each impression, including time, device, browser, and estimated location by city and country.
So, thank you for choosing ViralQR; we have an offer of nothing but the best in terms of QR code services to meet business diversity!
Assure Contact Center Experiences for Your Customers With ThousandEyes
Sun-Believable Solar Paint
1.
2. Current preparation techniques for quantum dot solar
cells require time-intensive, multi-step procedures. In
order to make these cells commercially viable, this
process must be simplified.
Here we present a first step towards creating an
economically viable solar paint that can be applied by
simply painting onto an electrode.
Combine solvent, CdS, and TiO2 with mixing and light heat, ~40 C.Mix for at least 30 minutes before applying.It is also possible to make solar paint using a pseudo-SILAR (successive ionic layer absorption and reaction) process.
Combine solvent, CdS, and TiO2 with mixing and light heat, ~40 C.Mix for at least 30 minutes before applying.It is also possible to make solar paint using a pseudo-SILAR (successive ionic layer absorption and reaction) process.
Combine solvent, CdS, and TiO2 with mixing and light heat, ~40 C.Mix for at least 30 minutes before applying.It is also possible to make solar paint using a pseudo-SILAR (successive ionic layer absorption and reaction) process.
Apply solar paint to an optically transparent electrode.Apply paint using a paint brush or with a doctor-blade method.Anneal using a hot air gun.
Add drop of 1M/1M Na2S/S electrolyte to the Reduced Graphene Oxide/Cu2S counter electrodeSandwich the photoanode with the counter electrode and clip togetherTest the photoelectrochemical performance of the cell under AM 1.5, 100 mW/cm2 illumination.